This thread is only for people who "pseudo" bricked it(like me) because of a non-working CWM.
1. get ADB Tools and a working/suppoted CWM (I'll post mine)
2. navigate through CMD to the folder. example: cd C:\ADB
3. bring your device in the bootloader mode through "adb reboot bootloader" (without the "" ofc)
4. in bootloader mode your device should be recognized as "FASTBOOT USB", if it doesnt just plug out and in the USB cable and wait some seconds.
5. Once it is recognized as FASTBOOT USB you can start flashing your custom recovery through "fastboot flash recovery recovery.img" (again, w/o "" ofc)
6. To test if everything went well go into RECOVERY using your volume buttons for navigation & power for choose. Now you can restart your device and be happy with it!
EDIT# FIXED
If you come across this problem this how you fix it.
Make sure you have a ROM installed that you can boot to with "Boot Android (No BP)" or "BP HW Diag & Boot AP"
Download ADB (you should have this as you would of used it to unlock the phone). Once downloaded open CMD and CD to the folder.
Boot the phone up and set it to Fastboot.
Then:
type "fastboot devices" Press Enter.
type "fastboot erase recovery" Press Enter.
type "fastboot reboot"
The phone will reboot as normal now. Once you are back into Android you can flash CWM with ROM Manager or TeamWin Recovery with GooManager.
So am I screwed?
So I'm in the process of trying to Root my ZTE Smarttab 10 on firmware v03b.
Ive been following instructions on the following pages:
http://forum.xda-developers.com/showthread.php?t=1629630
http://forum.xda-developers.com/showthread.php?t=1473555
The instructions are spread out across those threads and my problem starts kind of early in the process.
My goal is to use ADB to boot in to the Bootloader and then use a recovery rom to use TWRP to install a rom.
What i have done:
I have installed the ZTE Drivers
I have installed the SDK tools and updated it.
Now when the tablet is running normally I can see it in ADB and is able to run the command.
ADB Reboot Bootloader
This reboots the devices to a black screen (I assume this is the bootloader) and windows recognizes that a device is there.
The problem is that when I try to see this from ADB i cannot see the device when running ADB Devices.
This makes the next step impossible as I need to use ADB to boot a recovery rom.
So I would have posted in the development treads listed above but as I dont have 10 posts (this being my first post) I cannot post in the threads above.
I'm confident that this is a driver problem and I have uninstalled and re-installed all the drivers related to this including SDK.
But no luck yet.
Where other people say they have succeeded is when in the device manager they have ADB interface and ZTE Handset ADB interface listed.
This is the state where I'm at but I still cannot see the device in ADB.
Anyone have any insight on this kind of problem and can offer any help for a solution or direction to get to the solution.
Thank you for your help and attention!
//Nagarutu
Vodafone (ZTE) SmartTab10 3.2 HoneyComb
You can't use adb in bootloader mode, you want fastboot. So when you do 'adb reboot bootloader'. It reboots to the black screen (that is the bootloader). Try typing 'fastboot devices' and see if you're device comes up. It should if you have all drivers installed correctly and fastboot on your system. Then you'll be able to do 'fastboot flash recovery recovery.img' to install the custom recovery, then a 'fastboot reboot' and lastly an 'adb reboot recovery' will get you into your custom recovery to flash a new rom. Don't forget to make a backup.
matt4321 said:
You can't use adb in bootloader mode, you want fastboot. So when you do 'adb reboot bootloader'. It reboots to the black screen (that is the bootloader). Try typing 'fastboot devices' and see if you're device comes up. It should if you have all drivers installed correctly and fastboot on your system. Then you'll be able to do 'fastboot flash recovery recovery.img' to install the custom recovery, then a 'fastboot reboot' and lastly an 'adb reboot recovery' will get you into your custom recovery to flash a new rom. Don't forget to make a backup.
Click to expand...
Click to collapse
Thank you for the help ! it cleared things up for me.
Now the trouble's continue.
With the firmware im on (v03b) you cannot use the fastboot flash method but only fastboot.
And they way it is supposed to be done is that you run
fastboot boot recovery.img (recovery being a twrp recovery for my device)
When its booted to TWRP i should be able to see it in ADB to be able to run the following commands to it:
--> adb remount
--> adb shell
--> ln -s /system/xbin/su /system/bin/su
However I cannot get it to show in ADB (or fastboot) when its booted in to TWRP.
Any ideas?
I managed to solve the last bit to.
Now it was actually a driver problem, so i just updated the driver in device manager and located the ADB driver from ZTE and it worked to boot in to TWRP and then to flash the device.
Now I have CM10 installed and is smiling!
Took me 4 days but damn it its done!
Thanks for the help!
Glad you've figured it out
1a
2a
3a
4a
5a
1) install adb driver + adb
2) copy supersu on your phone
adb reboot bootloader
check fastboot devices
when you see nothing install "Android Soner Single ADB Interface" from https://drive.google.com/file/d/0BxN...ew?usp=sharing
fastboot oem unlock
fastboot flash recovery twrp-3.0.2-1-gemini.img
fastboot boot twrp-3.0.2-1-gemini.img
press volume up + power to reboot into recovery
scrren is now broken like you brickled your phone
wait 2min then its going off
push power once and twrp in running
flash su and reboot system
voila rooted le max2
and ye its aweful ****ed up and I wasted much time to find that all out
not worth for a $200 phone lol
I am very new to this, I rooted my Moto G4 and now I need to download SUHide in order to play Pokemon Go. When I try to enter recovery via my fastboot/abd folder I get a < waiting for any device > message. When I hold down the power + volume down button my phone just turns on as normal without entering bootloader even though my bootloader is unlocked. I tried downloading an app that loads recovery for me but when I tried that I got a "no command" screen with a little green robot.
From what I've read, it's possible I didn't flash my trwp properly? I don't know how this is possible since I just rooted my phone. I would appreciate some help, I'm afraid to take any random guesses at the risk of ruining my phone. Sorry if I'm missing something obvious or not giving enough info, I'm not very tech savvy.
levijoseph said:
I am very new to this, I rooted my Moto G4 and now I need to download SUHide in order to play Pokemon Go. When I try to enter recovery via my fastboot/abd folder I get a < waiting for any device > message. When I hold down the power + volume down button my phone just turns on as normal without entering bootloader even though my bootloader is unlocked. I tried downloading an app that loads recovery for me but when I tried that I got a "no command" screen with a little green robot.
From what I've read, it's possible I didn't flash my trwp properly? I don't know how this is possible since I just rooted my phone. I would appreciate some help, I'm afraid to take any random guesses at the risk of ruining my phone. Sorry if I'm missing something obvious or not giving enough info, I'm not very tech savvy.
Click to expand...
Click to collapse
Try power plus volume up button to go to fastboot mode.
If it not working then connect your android to pc and enable adb. Type "adb devices" enter then type "adb reboot bootloader" and enter. It boots your android in fastboot mode.
If adb commands not working then install adb and fastboot drivers and try again.
https://forum.xda-developers.com/showthread.php?t=2317790
In most devices, volume up + power boots up the recovery options, volume down + power boots the device into fastboot mode (volume buttons first plus power, pressing power button first would boot the device normally).
levijoseph said:
When I try to enter recovery via my fastboot/abd folder I get a < waiting for any device > message. When I hold down the power + volume down button my phone just turns on as normal without entering bootloader even though my bootloader is unlocked.
Click to expand...
Click to collapse
How did you install the custom recovery? Try flashing the recovery.img again (I'm guessing, since you have root, that you did not "flash" (fastboot flash recovery recovery.img) TWRP but just "boot" (fastboot boot recovery.img) it and installed SuperSU).
Ashwinrg said:
Try power plus volume up button to go to fastboot mode.
If it not working then connect your android to pc and enable adb. Type "adb devices" enter then type "adb reboot bootloader" and enter. It boots your android in fastboot mode.
If adb commands not working then install adb and fastboot drivers and try again.
https://forum.xda-developers.com/showthread.php?t=2317790
Click to expand...
Click to collapse
Okay, so that did work, and I was able to enter fastboot mode. However, once I scrolled down to "recovery mode" and tried to enter, I got the same "no command" screen.
rolland.arriza said:
In most devices, volume up + power boots up the recovery options, volume down + power boots the device into fastboot mode (volume buttons first plus power, pressing power button first would boot the device normally).
How did you install the custom recovery? Try flashing the recovery.img again (I'm guessing, since you have root, that you did not "flash" (fastboot flash recovery recovery.img) TWRP but just "boot" (fastboot boot recovery.img) it and installed SuperSU).
Click to expand...
Click to collapse
I used the official moto g4 root guide on this website to root my phone and I'm pretty sure I booted, not flashed, the recovery img (mine is named twrp-3.0.2-0-athene). So, I tried using the command you provided to flash the recovery img and I got a < waiting for any device > message in the command prompt. My phone is plugged in and my recovery img is in the adb / fastboot folder. Any idea what this means? Thank you for the help guys
edit: If it helps to know this, my phone has usb debugging enabled and it is recognized by my pc. I type adb devices and my moto g4 serial number does indeed show up.
levijoseph said:
I am very new to this, I rooted my Moto G4 and now I need to download SUHide in order to play Pokemon Go. When I try to enter recovery via my fastboot/abd folder I get a < waiting for any device > message. When I hold down the power + volume down button my phone just turns on as normal without entering bootloader even though my bootloader is unlocked. I tried downloading an app that loads recovery for me but when I tried that I got a "no command" screen with a little green robot.
From what I've read, it's possible I didn't flash my trwp properly? I don't know how this is possible since I just rooted my phone. I would appreciate some help, I'm afraid to take any random guesses at the risk of ruining my phone. Sorry if I'm missing something obvious or not giving enough info, I'm not very tech savvy.
Click to expand...
Click to collapse
If you are trying to flash twrp recovery on your android then rename your twrp to recovery.
Boot your android in fastboot mode,
Navigate to folder that you have recovery. Press shift and right click and click on open command here and type "fastboot devices" and enter
"fastboot flash recovery recovery.img
It flash your recovery to your android.
Ashwinrg said:
If you are trying to flash twrp recovery on your android then rename your twrp to recovery.
Boot your android in fastboot mode,
Navigate to folder that you have recovery. Press shift and right click and click on open command here and type "fastboot devices" and enter
"fastboot flash recovery recovery.img
It flash your recovery to your android.
Click to expand...
Click to collapse
Did all that, getting:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
error: cannot load 'recovery.img'
Also, per the suggestion of other users on these forums, I tried to hold down power and press volume up during the "no command" screen after attempting to enter recovery. That sent me into Android Recovery but it's not the twrp platform I used when originally rooting my phone.
How did you unlock the bootloader? have you tried: fastboot oem unlock?
You need to "allow oem unlocking" on developer options (which I guess you already did). Then reboot in bootloader: (a) adb reboot bootloader. In fastboot, you need to unlock the bootloader first: (b) fastboot oem unlock (or unlock-go). Then you can try to flash that recovery.img: (c) fastboot flash recovery "name of the file.img"
edit: fastboot oem unlock restores the device to factory settings. You need to configure and enable again "usb debugging" and "oem unlocking" (which are disabled by default). You can then proceed to fastboot flash