How does CM9 get ported to phones that dont have a CM9 BASE to begin with? Such as the Samsung Galaxy W. How do they do that.? Because to my knowledge, you must port a ROM with the same firmware as your Base. Or am I wrong. If so. How.?
any dev plz address this doubt as 'm lookin for t same answer!!!
zeyaan said:
any dev plz address this doubt as 'm lookin for t same answer!!!
Click to expand...
Click to collapse
im not a dev yet but according to me it's built from cm 9 source and fetching files with phones from similar specs..
ajay8055 said:
im not a dev yet but according to me it's built from cm 9 source and fetching files with phones from similar specs..
Click to expand...
Click to collapse
.. and once you do that.. how do you set it for your device.???
unicorndust98 said:
.. and once you do that.. how do you set it for your device.???
Click to expand...
Click to collapse
you need a working devcie_cconfig for your device and then compile....then try booting the rom fails diagnoize take a look at logcat try understanding the problem and find a possible fix...
All right.!
Sent from pure, raw, awesomeness
Related
Hi Guys,
is someone interested helping me build a device tree for the sony xperia go so that we would be able to compile CM9 from source with the latest sony kernel source ?
i was able to build the ICS kernel from this 6.1.B.0.544 Kernel Source for the sony xperia go allready.....
thanks a lot for your help, recommendations, ...
cheers
We'll start working on it for AXP soon. It's going to be a difficult task, adding a new target from scratch, but after that porting to multiple devices will be easy. You can follow AXP on GitHub.
K900 said:
We'll start working on it for AXP soon. It's going to be a difficult task, adding a new target from scratch, but after that porting to multiple devices will be easy. You can follow AXP on GitHub.
Click to expand...
Click to collapse
could you post the link to the git, i already got my source online at git for the kernels i have published.....
would it be possible to contribute ?
cheers
krachlatte said:
could you post the link to the git, i already got my source online at git for the kernels i have published.....
would it be possible to contribute ?
cheers
Click to expand...
Click to collapse
GitHub.com/AOKPXperia. You said you have the P ICS kernel ported, right? Add me on gtalk or join #axp on freenode later today and we'll see where we can go from here. Typing from my phone is a pain
I wish I could help...
Thanks a lot guys, especially krachlatte!
Hi guys i am on vacation, .... just wanted to let you know i will get in touch with you when i am back...
Id realy like to have this fm to my xperia go
Go for CM10 if you can dude, CM9 and CM7 are cool but not the newest, but would love to have an alternative to samsungs firmware tbh.
Androboss said:
Go for CM10 if you can dude, CM9 and CM7 are cool but not the newest, but would love to have an alternative to samsungs firmware tbh.
Click to expand...
Click to collapse
Androboss said:
alternative to samsungs firmware
Click to expand...
Click to collapse
Wait, what?
K900 said:
Wait, what?
Click to expand...
Click to collapse
My bad, i meant sony
guess you are back but not doing the project
hi guys,
how is the porting going for CM10 ??
i am totally stuck with, not enough coder knowledge i guess, with setting up the device trees ....
cheers
krachlatte said:
hi guys,
how is the porting going for CM10 ??
i am totally stuck with, not enough coder knowledge i guess, with setting up the device trees ....
cheers
Click to expand...
Click to collapse
No GSM.
K900 said:
No GSM.
Click to expand...
Click to collapse
Cheer for ur effort for XG:beer:
Sent from Cambodia The Kingdom of Wonder with Xperia Go
is there something i could do to assist you ?
cheers
krachlatte said:
is there something i could do to assist you ?
cheers
Click to expand...
Click to collapse
Not really. If you know your way around that, try writing a RIL class.
so here is something wrong right ? rild.c
do you have the propeiretary libril.so from the phone ?
krachlatte said:
so here is something wrong right ? rild.c
do you have the propeiretary libril.so from the phone ?
Click to expand...
Click to collapse
No, not the native part, the Java part.
Anynew of CM 9/10 for our Go
Sent from my ST27i using xda app-developers app
all u8500 devices are ready for cm9
and will be released after we fix audio
not working
-Audio
-FmRadio
-WIFIHotspot
working
-everything else
bugs
YOU have to discover
br
J
FreeXperia Team
Hi, I just want to know if someone maybe know if android 4.2 will come to SGS2 devices ?
Thanks for any help
sundayhd said:
Hi, I just want to know if someone maybe know if android 4.2 will come to SGS2 devices ?
Thanks for any help
Click to expand...
Click to collapse
Officially? No.
Cenobite_ said:
Officially? No.
Click to expand...
Click to collapse
Anything is possible Fear not we got awesome devs here
sundayhd said:
Hi, I just want to know if someone maybe know if android 4.2 will come to SGS2 devices ?
Thanks for any help
Click to expand...
Click to collapse
Follow CM team, if it can happen these are the devs that will do it. Already various functions have been put on I9100 such as the picture sphere.
Sent from my GT-I9100 using xda premium
The answer
I took to effort to ask a CyanogenMod developer, this is what he said (check the pic)
Can Flyme os be ported to our ace ? link to original thread http://forum.xda-developers.com/showthread.php?p=33926033#post33926033
I am already busy with it Booting, but FC's Everywhere.
PulseDroid said:
I am already busy with it Booting, but FC's Everywhere.
Click to expand...
Click to collapse
gimme long logcat
i will see whats causing FC
Sent from my ST25i using xda premium
PulseDroid said:
I am already busy with it Booting, but FC's Everywhere.
Click to expand...
Click to collapse
Very nice, thank you :laugh:
looks awesome!!
I want this ROM!!!
it looks very nice
sign me in
It looks great but the original rom has bugs & all we do is flash, try & go back to the stable ones ! You can think of porting its looks & use something else as base. That would be gr8...
Sent from my GT-S5830 using xda premium
Now sony xperia play has it own version too http://forum.xda-developers.com/showthread.php?t=2004284.Pulsedroid how are you doing with this rom ?
Its ics base so porting will not difficult
jb makes things much hard to port
Awesome
:fingers-crossed: Excited ...
I love the way how it looks and I will be so glad if devs port this for ace.
FLYME OS
Hi Guy`s...
have somebody an point or an state of porting/dev this rom ?
Flyme OS 2.0 iss finished from Dev site... but not from meizu... so PLz give me an state of bug`s etc... thx...
i can and will help... have 2 devices for dev and testing soo Come on Peoples...
we can have an Rom which was build for an Quad core system !
greetttzzz
i could help out, if you would direct me to which device you want it for.
emwno said:
i could help out, if you would direct me to which device you want it for.
Click to expand...
Click to collapse
Samsung galaxy ace
diegonnc said:
Samsung galaxy ace
Click to expand...
Click to collapse
ok so ill get to it soon.
emwno said:
ok so ill get to it soon.
Click to expand...
Click to collapse
main problem with flyme port is cant get external sdcard working and unfortunately cooper not have internal storage
nims11 said:
main problem with flyme port is cant get external sdcard working and unfortunately cooper not have internal storage
Click to expand...
Click to collapse
I had the same problem on my phone (Xperia pro). Fixed it with a couple a mods and replacements. All i need from you guys, is to test it, proviide logs, and some des who could detect the actual problem from the log as I ain't too good at reading it
emwno said:
I had the same problem on my phone (Xperia pro). Fixed it with a couple a mods and replacements. All i need from you guys, is to test it, proviide logs, and some des who could detect the actual problem from the log as I ain't too good at reading it
Click to expand...
Click to collapse
I can test and report, just pm me :cyclops:
FlymeOS is also available on GB base!!
Cant any one port FLYMEOS to GB base?
Hello guys,
I develop ReVolt ROM for 5 devices, I9100, I9100G, I9300, N7000, Mako ..... The thing is, I was looking for a build bot so it would make it easier for me to build .... For one build to finish on my computer, it takes 190 MINUTES !!! So to build for 5 DEVICES, it takes almost 39.3 Hours for a full set of builds !!!!!!
I was looking for a build bot, but I can't find anything .. Can anybody tell me where i can find one who offers something like that ???
Thanks in advance,
Johnhany97
http://ci.apache.org/buildbot.html
chasmodo said:
http://ci.apache.org/buildbot.html
Click to expand...
Click to collapse
Thanks you very much
I am now looking for how to join it .....
chasmodo said:
http://ci.apache.org/buildbot.html
Click to expand...
Click to collapse
Can you provide another Buildbot ?? They only accept team admissions but I work alone Can anybody please help ??
johnhany97 said:
Can you provide another Buildbot ?? They only accept team admissions but I work alone Can anybody please help ??
Click to expand...
Click to collapse
I would recommend taking a look at the TRAC build bot, it doesn't require you to have a team. You can find more information about it from here. Also if you want to look at the documentation for it to get an idea of how to use it and what it involves I would suggest taking a look at the official documentation.
shimp208 said:
I would recommend taking a look at the TRAC build bot, it doesn't require you to have a team. You can find more information about it from here. Also if you want to look at the documentation for it to get an idea of how to use it and what it involves I would suggest taking a look at the official documentation.
Click to expand...
Click to collapse
I know it, tried it ... but It never worked properly with me even after following the steps .... Like, I know goo.im provide something like that .... But they don't accept anyone .....
johnhany97 said:
I know it, tried it ... but It never worked properly with me even after following the steps .... Like, I know goo.im provide something like that .... But they don't accept anyone .....
Click to expand...
Click to collapse
Another thing that I found is a shell script that automatically builds Android ROM's from there source directories, you can find more information about it here. Also I think one the reasons you may not have been able to get build bot to work right is because you must add in repo support which Android relies on, as mentioned in this article.
shimp208 said:
Another thing that I found is a shell script that automatically builds Android ROM's from there source directories, you can find more information about it here. Also I think one the reasons you may not have been able to get build bot to work right is because you must add in repo support which Android relies on, as mentioned in this article.
Click to expand...
Click to collapse
l have my own scripts ready and everything, all I need is to find a buildbot for Android devs..... I also think that XDA offers some for Recognized Developers ... Not so sure about that ..
johnhany97 said:
l have my own scripts ready and everything, all I need is to find a buildbot for Android devs..... I also think that XDA offers some for Recognized Developers ... Not so sure about that ..
Click to expand...
Click to collapse
goo.im offers servers for this but, they only give it off of referrel
ayysir said:
goo.im offers servers for this but, they only give it off of referrel
Click to expand...
Click to collapse
Do you know someone who uses it ?
This is a fairly square build for the sm-t230nt degaswifidtv qcom/msm8226
cm11_degaswifidtv-round2.zip
https://drive.google.com/file/d/0B9n_loxLasIVNnpVMV9BN21laUU/view?usp=sharing
bluetooth is not yet functioning.
My main interest in this excercise was to assemble working/workable sources to get development moving
for this device.
As of getting the recovery functioning correctly, all required is assembled to help any actual owner of this
device to begin taking it foward.
I will limit my effort in this to getting the bluetooth issue resolved,
and possibly getting dtv functions working.
Thank you @Erus Tyrannus for inquiring about recovery initially and testing this build and provding feedback to date.
Sources assembled in post 2
Sources
Kernel
SM-T230NT_LA_KK CAF
https://github.com/moonbutt74/kernel_samsung_degaswifidtv/tree/master
Device Tree
https://github.com/moonbutt74/device_samsung_degaswifidtv
Vendor Sources - need work
https://github.com/moonbutt74/vendor_samsung_degaswifidtv
Reserved
Reserved for updates
I am not accepting any requests.
This is not an app support thread.
This is not an Odin/Firmware support thread.
Thank you.
m
Awesome ty!!!
gammaxgoblin said:
Awesome ty!!!
Click to expand...
Click to collapse
G,
hi, you will want to edit build.prop to change screen density to 160
When i have an idea of what's wrong with bluetooth and get it sorted,
i will also adjust the next build for correct dpi setting.
m
Will this run on the 230nu?
I'll try it..
phonetec said:
I'll try it..
Click to expand...
Click to collapse
gammaxgoblin said:
Will this run on the 230nu?
Click to expand...
Click to collapse
Guys,
NOOOOO! don't do that. this is for a version of the galaxy tab 4 7.0 which is a qcom/msm device!
No one has managed a build yet for the sm-t230nu which is a Marvell device.
sorry
m
Damnit
And about DTV? It's working?
riclixo said:
And about DTV? It's working?
Click to expand...
Click to collapse
DTV is not implemented yet.
Any new's with BT ?
mario156090 said:
Any new's with BT ?
Click to expand...
Click to collapse
No, i don't own the device.
I established the resources to build, so now you guys need a developer in ownership of the device to get things moving.
i am moving out of rom building and going back to the kernel and some other things.
m
moonbutt74 said:
No, i don't own the device.
I established the resources to build, so now you guys need a developer in ownership of the device to get things moving.
i am moving out of rom building and going back to the kernel and some other things.
m
Click to expand...
Click to collapse
Ok friend, thank for your job and sorry for my bad english.
@moonbutt74:
Will this work on the SM-T230N version?
tablord said:
@moonbutt74:
Will this work on the SM-T230N version?
Click to expand...
Click to collapse
T,
i don't know, i don't own the device.
m
tablord said:
@moonbutt74:
Will this work on the SM-T230N version?
Click to expand...
Click to collapse
not work
Thread closed at OP's request