I was running Blazer Rom 1.4 and decided to check out CM9 latest nightly. I did a Nandroid, Wiped and then flashed. It seemed ok. Then I noticed I had no voice/data services at all. So I figured CM9 wasn't ready for primetime and flashed back to my nandroided backup of Blazer Rom. I still have no voice/data services. I really don't know what to do next. I have confirmed that Sprint is working in my area. Any suggestions would greatly be appreciated.
jefsong said:
I was running Blazer Rom 1.4 and decided to check out CM9 latest nightly. I did a Nandroid, Wiped and then flashed. It seemed ok. Then I noticed I had no voice/data services at all. So I figured CM9 wasn't ready for primetime and flashed back to my nandroided backup of Blazer Rom. I still have no voice/data services. I really don't know what to do next. I have confirmed that Sprint is working in my area. Any suggestions would greatly be appreciated.
Click to expand...
Click to collapse
Is it finding sprint signal? You may have to call them and do a hand-free activation. I can't remember the dialpad # but what it does is reset the phone's profile data and reactivates it on your sprint number. You'll need your MSL, too.
Im seconding this and I am freaking out right now!!
jefsong said:
I was running Blazer Rom 1.4 and decided to check out CM9 latest nightly. I did a Nandroid, Wiped and then flashed. It seemed ok. Then I noticed I had no voice/data services at all. So I figured CM9 wasn't ready for primetime and flashed back to my nandroided backup of Blazer Rom. I still have no voice/data services. I really don't know what to do next. I have confirmed that Sprint is working in my area. Any suggestions would greatly be appreciated.
Click to expand...
Click to collapse
You should try to ODIN back to stock.
This should also not be in DEV section, but in General. You will be blazed.
Also - I am using the CM9 and besides a FC on boot - it works great!
This happened to me before, I wasn't on CM9 but I ended up restoring the stock firmware and updated profile and PRL, then rebooted and it worked fine
Sent from my SPH-L710 using Tapatalk 2
fergie716 said:
This happened to me before, I wasn't on CM9 but I ended up restoring the stock firmware and updated profile and PRL, then rebooted and it worked fine
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the quick replies. I am sorry about putting this in the wrong thread. I realized it after I hit submit.
jefsong said:
Thank you for the quick replies. I am sorry about putting this in the wrong thread. I realized it after I hit submit.
Click to expand...
Click to collapse
It happens. Personally I would like to see device specific Q&A/General threads. Would be a lot easier I think
Hope that helps tho
Sent from my SPH-L710 using Tapatalk 2
jefsong said:
I was running Blazer Rom 1.4 and decided to check out CM9 latest nightly. I did a Nandroid, Wiped and then flashed. It seemed ok. Then I noticed I had no voice/data services at all. So I figured CM9 wasn't ready for primetime and flashed back to my nandroided backup of Blazer Rom. I still have no voice/data services. I really don't know what to do next. I have confirmed that Sprint is working in my area. Any suggestions would greatly be appreciated.
Click to expand...
Click to collapse
Try going into the Mobile networks settings menu and just change the Network mode. Switch the setting and let it reboot, see if it helps.
I had an issue like this. If you get an error when you try to call someone let it play through and it should call sprint and they'll fix it for you. No questions asked.
Sent from my SPRINT GALAXY S III
thetony said:
I had an issue like this. If you get an error when you try to call someone let it play through and it should call sprint and they'll fix it for you. No questions asked.
Sent from my SPRINT GALAXY S III
Click to expand...
Click to collapse
I never let it play through. I had no idea that happens! Good tip!
Sent from my SPH-L710 using Tapatalk 2
fergie716 said:
I never let it play through. I had no idea that happens! Good tip!
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
It doesn't let me even make a call. I am going to have to try to flash a the stock rom and see where that gets me.
jefsong said:
It doesn't let me even make a call. I am going to have to try to flash a the stock rom and see where that gets me.
Click to expand...
Click to collapse
Yea try using Odin and get back stock firmware, then update PRL/Profile and reboot
similar situation. phone info doesnt know MIN or number but it all works. I second the stock in ODIN, update profile/prl/activate and try flashing again
billard412 said:
similar situation. phone info doesnt know MIN or number but it all works. I second the stock in ODIN, update profile/prl/activate and try flashing again
Click to expand...
Click to collapse
Not sure what to do next. I used ODIN to load the stock Samsung ROM (KIES_HOME_L710VPALEN_L710SPRALEN_618049_REV03_user_low_ship.tar) and I still no mobile services. Is the firmware a not included in the ROM. Is it a separate flash?
Try the below, it just reset and activated my device (again, lol). No MSL# required.
##72786#
samcintron said:
Try the below, it just reset and activated my device (again, lol). No MSL# required.
##72786#
Click to expand...
Click to collapse
THAT WORKED! Thank you so much. I gotta make sure to right that one down. lol
jefsong said:
THAT WORKED! Thank you so much. I gotta make sure to right that one down. lol
Click to expand...
Click to collapse
Lol ditto
Sent from my SPH-L710 using Tapatalk 2
Had the exact same situation and just threw everything in the book at it, wish I would have found this thread earlier!! The person who posted the dialer code is a da' freakin' man!
Edit: Here's my question - What caused this?!?
DutchDogg54 said:
Had the exact same situation and just threw everything in the book at it, wish I would have found this thread earlier!! The person who posted the dialer code is a da' freakin' man!
Edit: Here's my question - What caused this?!?
Click to expand...
Click to collapse
In my case I believe I inadvertently installed the LG2 OTA as I was getting ready to flash a new ROM. So when the new ROM loaded it was a different firmware. It was a freakin nightmare to get things back in order and yes, the ##72786# was a huge help. I had to flash all the way back to stock recovery just to set things straight. But now at least I know to make sure the basecode matches the ROM.
fergie716 said:
Lol ditto
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
DutchDogg54 said:
Had the exact same situation and just threw everything in the book at it, wish I would have found this thread earlier!! The person who posted the dialer code is a da' freakin' man!
Edit: Here's my question - What caused this?!?
Click to expand...
Click to collapse
jefsong said:
THAT WORKED! Thank you so much. I gotta make sure to right that one down. lol
Click to expand...
Click to collapse
Glad I could help but it was Ascertion's post that gave me the hint.
Related
Ok so i just installed the new MR2 Radio and then i proceeded to install gingeritius 1.0.. when the phone first booted up i had great service 5 bars, its been 10mins now and i dont have a single bar? Anyone know why this is.
BUMP Please!!!!
Verizon caught you rooting and installing custom rom's on your phone and has disabled your service.
If problem persist just reboot, your phone is ok.
00negative said:
If problem persist just reboot, your phone is ok.
Click to expand...
Click to collapse
I reboot with no service...
So try installing the radio again or maybe there is just Verizon issue in your area or go back to whatever you were on before Gingeritis and see if it works then or go back to froyo radio unless your phone is stuck you got tons of options to try
00negative said:
So try installing the radio again or maybe there is just Verizon issue in your area or go back to whatever you were on before Gingeritis and see if it works then or go back to froyo radio unless your phone is stuck you got tons of options to try
Click to expand...
Click to collapse
I cant find the Froyo Radio, im bugging out!!
Try toggling your internet connection on and off. Usually works for me.
dfox007 said:
Try toggling your internet connection on and off. Usually works for me.
Click to expand...
Click to collapse
i cant even get it to toggle on...
this is very frustrating
g00s3y said:
Verizon caught you rooting and installing custom rom's on your phone and has disabled your service.
Click to expand...
Click to collapse
Negative ghost rider..
Sent from my ADR6400L using XDA App
Try checking the network settings and change to cdma auto (prl)
Sent from my ADR6400L using XDA App
Hold the power button down like you're going to restart your phone. The bottom option toggles internet. Turn off for a few seconds then back on. Otherwise make sure you have the correct radio. You might need to re flash the Rom or radio.
I'm running the same setup with no problem.
Almost sounds like you have wrong radio for ROM, like froyo radio on GB rom or vice versa.
Guys i have done everything you said to do, no luck. I dont have my phone today cause i dont have service on it. Can someone please give me instructions on how to do this.
Ok so last night i decided to go to gingerbread, the first thing i did was i factory reset my phone cleared all the data and flashed the MR2 radio through Hboot. After it loaded up i switch to Gingeritius 1.0 and i everything was perfect!. 10 mins later i lose all my service and it doesnt even let me turn on my Mobile network. I have no idea what i did wrong but if someone could please help me it be awesome. thanks guys. btw im freaking out with no phone =(
David522d said:
I cant find the Froyo Radio, im bugging out!!
Click to expand...
Click to collapse
All the radios are in the development thread.
sparta31 said:
All the radios are in the development thread.
Click to expand...
Click to collapse
But there not listed which is which
David522d said:
But there not listed which is which
Click to expand...
Click to collapse
Did you look here?
http://forum.xda-developers.com/showthread.php?t=1045081
H3Dude said:
Did you look here?
http://forum.xda-developers.com/showthread.php?t=1045081
Click to expand...
Click to collapse
Are these gingerbreads radios? Should i just load these up the Hboot until one works? Idk what to do guys im sorry for being such a noob about the subject
David522d said:
Are these gingerbreads radios? Should i just load these up the Hboot until one works? Idk what to do guys im sorry for being such a noob about the subject
Click to expand...
Click to collapse
Man I'm not trying to be rude but read the first post. It states what the radios are
das BAMF sense 3.0 rocking the bolt
Is it possible for anyone to point me in the right direction for something like a mod or instructions on how I'd be able to remove the transparent pull down from das Bamf 1.8.6 and maybe replace it w/ the stock pull down?
As always any info is appreciated.
Sent from my ADR6400L using XDA App
just find a theme or rom you like and switch out the corresponding png files in /system/app/SystemUI.apk. I can't remember the names of the ones you'd want to swap out but it shouldn't be that hard to figure out.
Actually 1.8.6 is froyo, so they be in framework-res/drawable-hdpi.
*My name is YankInDaSouth and I approve this message*
Cool thanks for the info. I'll look into it.
Sent from my ADR6400L using XDA App
YankInDaSouth said:
Actually 1.8.6 is froyo, so they be in framework-res/drawable-hdpi.
*My name is YankInDaSouth and I approve this message*
Click to expand...
Click to collapse
Yikes, I've never flashed Bamf but I suppose I should have checked the vers to prevent giving the wrong info. Been on GB since January so I'm always in that frame of reference. Anyway, thanks for catching that.
OP, if you want to do this easily on your phone check out NinjaMorph. Works fine for stuff like this when you learn how to use it.
Absolute_Zero said:
Yikes, I've never flashed Bamf but I suppose I should have checked the vers to prevent giving the wrong info. Been on GB since January so I'm always in that frame of reference. Anyway, thanks for catching that.
OP, if you want to do this easily on your phone check out NinjaMorph. Works fine for stuff like this when you learn how to use it.
Click to expand...
Click to collapse
Awesome I'll check it out.
Sent from my ADR6400L using XDA App
OP, try flashing this in recovery to get your stock looking notification pull down. Should be no need to wipe anything ... but, of course, be sure you have a current backup. I am not running this ROM and can not test this .zip. Let me know if this is what you're after.
YankInDaSouth said:
OP, try flashing this in recovery to get your stock looking notification pull down. Should be no need to wipe anything ... but, of course, be sure you have a current backup. I am not running this ROM and can not test this .zip. Let me know if this is what you're after.
Click to expand...
Click to collapse
Excellent, I'll give it a try. Been dinking around in framework-res and been getting fc's -_-
YankInDaSouth said:
OP, try flashing this in recovery to get your stock looking notification pull down. Should be no need to wipe anything ... but, of course, be sure you have a current backup. I am not running this ROM and can not test this .zip. Let me know if this is what you're after.
Click to expand...
Click to collapse
It worked great thanks a lot.
Nate14 said:
It worked great thanks a lot.
Click to expand...
Click to collapse
Sweet, glad that got it for ya
Ive been putting new roms on my rezound and when i put on newtoroots ics sense 4 rom it started doing this. I put stock rom back on and still doing it... i tried this http://forum.xda-developers.com/showthread.php?t=1394659 but still did nothing... please help
I have the same issue with OnE XxX. I'm running the latest RUU right now to see if it fixes it. I'll update shortly and let you know.
[edit] well, what do you know. That actually worked. Weird.
http://www.androidfilehost.com/main/-Support_Files-/RUU/Vigor/RUU_Vigor_3.14.605.10_PH98IMG.zip
LunaticSerenade said:
I have the same issue with OnE XxX. I'm running the latest RUU right now to see if it fixes it. I'll update shortly and let you know.
Click to expand...
Click to collapse
Whenever you use the dial pad, does it freeze and restart?
I had some super epic bootlooping whenever I did anything. It was pretty sweet.
I'm re-RUUing right now. My data is being funky, so I'm going to do a stock factory reset.
LunaticSerenade said:
I had some super epic bootlooping whenever I did anything. It was pretty sweet.
I'm re-RUUing right now. My data is being funky, so I'm going to do a stock factory reset.
Click to expand...
Click to collapse
Did that work?
schust3r5 said:
Did that work?
Click to expand...
Click to collapse
It did. Finally got it all set up, and it's nice.
Sent from my evolving Rezound.
LunaticSerenade said:
It did. Finally got it all set up, and it's nice.
Sent from my evolving Rezound.
Click to expand...
Click to collapse
Can you help me out? How do you fix it?
schust3r5 said:
Can you help me out? How do you fix it?
Click to expand...
Click to collapse
I fixed it!!!!!!!!!!!!!!!!!! i Just flashed the gb firmware patch and it works now.
i remember i flashed it before but i guess i had to do it again.
Hello all.
I have searched this issue quite a bit, and I have some ideas, I just need a bit of direction.
So, I have a rooted Galaxy S2 running ICS version 4.0.3. I rooted it via Zedomax's youtube videos (I would link it, but youtube has closed his account FREE ZEDO!) Some mornings, when i wake up, I notice my WiFi is not connected and my phone is using 3G for its data. So, I go look in the WiFi list and it is on, but its not connected. I tap connect, nothing happens. It doesn't even try. I forget the network and re-enter the credentials, nothing. I reboot the phone, same thing. Finally, once i remove the battery a few times, it starts to work but not very well. I have a Netgear WNR2000V3 router. Just did a fresh upgrade/install of the latest firmware. All of my other wireless devices at home stay on and work fine. Now, i did notice that ever since i rooted when i first got my phone on version 2.3, i had WiFi issues. So my first thought is it could be my kernel? Like i said, this only happens at home. I also have the exact same router (WNR2000v3) for my staff WiFi at work and I have no trouble connecting each morning.
So, what are the steps i can take to fix this? Is this a known issues with the ATT SGS2? Am I missing something?
I would post a sreenshot of my phone info but since I'm a new user I won't be able to so here it is in text!
Model Number:
Samsung-SGH I777
Android Version: 4.0.3
Baseband Version:
I777UCLE5
Kernel Version:
3.0.15-AJ_5-14-2012_
[email protected] #2
Build Number:
IML74K.CLE5
Any help would be much appreciated.
I'm not sure about your problem but for future reference don't use any of zedomax's stuff
Sent from my SGH-I777 using Tapatalk 2
Zedomaxs stuff is known to break wifi just flash a different kernel and I think u should be fine. Correct me if I'm wrong
Sent from my SGH-i777 using XDA
Nick281051 said:
I'm not sure about your problem but for future reference don't use any of zedomax's stuff
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Any certain method you would suggest for next time?
brandonarev said:
Zedomaxs stuff is known to break wifi just flash a different kernel and I think u should be fine. Correct me if I'm wrong
Sent from my SGH-i777 using XDA
Click to expand...
Click to collapse
Sounds good! Can you link me any certain kernel I should use? Thought I saw a thread a few days ago that had quite a bit of information on SGH-I777 kernels but of course, when I actually need it, I can't find it!
reklaimer said:
I rooted it via Zedomax's youtube videos (I would link it, but youtube has closed his account FREE ZEDO!)
Click to expand...
Click to collapse
yea, google zedomax and XDA. lazy money hungry dev.
Never link anything from him here. He may be smart in some cases, but has no repsect here.
We have plenty of guides at our disposal from real devs, and user GET support from them.
---------- Post added at 10:21 AM ---------- Previous post was at 10:20 AM ----------
reklaimer said:
Sounds good! Can you link me any certain kernel I should use? Thought I saw a thread a few days ago that had quite a bit of information on SGH-I777 kernels but of course, when I actually need it, I can't find it!
Click to expand...
Click to collapse
we have 3 or 4 good kernels, and its up to you what you want to use. take into fact what you plan on running, AOSP or Touchjizz
MotoMudder77 said:
yea, google zedomax and XDA. lazy money hungry dev.
Never link anything from him here. He may be smart in some cases, but has no repsect here.
We have plenty of guides at our disposal from real devs, and user GET support from them.
---------- Post added at 10:21 AM ---------- Previous post was at 10:20 AM ----------
we have 3 or 4 good kernels, and its up to you what you want to use. take into fact what you plan on running, AOSP or Touchjizz
Click to expand...
Click to collapse
Thanks. Noted!
MotoMudder77 said:
we have 3 or 4 good kernels, and its up to you what you want to use. take into fact what you plan on running, AOSP or Touchjizz
Click to expand...
Click to collapse
^^this. Just check out the dev section for different kernels. Since ur rooted just flash a rom which has a kernel already packaged.
Sent from my SGH-i777 using XDA
brandonarev said:
^^this. Just check out the dev section for different kernels. Since ur rooted just flash a rom which has a kernel already packaged.
Sent from my SGH-i777 using XDA
Click to expand...
Click to collapse
Flashing a new rom shouldn't mess with my existing apps or settings right?
reklaimer said:
Flashing a new rom shouldn't mess with my existing apps or settings right?
Click to expand...
Click to collapse
If you flash a new rom it is required to wipe. It doesn't take that long to set everything up again though as long as you use things like titanium backup
Sent from my SGH-I777 using Tapatalk 2
reklaimer said:
Flashing a new rom shouldn't mess with my existing apps or settings right?
Click to expand...
Click to collapse
When you flash a new rom you do need to do a full wipe, data cache and dalvik cache. So in essence u will lose everything so u should back up ur stuff and restore it after u install ur rom
Sent from my SGH-i777 using XDA
Ah okay. This seems the way to go then! I like the touchwiz interface so i think i'll stick with a rom that supports it if possible. No complaints, in gingerbread i hated the way it handled MMS messages, but it works much better in ICS.
Thanks for all of your help guys!
reklaimer said:
Ah okay. This seems the way to go then! I like the touchwiz interface so i think i'll stick with a rom that supports it if possible. No complaints, in gingerbread i hated the way it handled MMS messages, but it works much better in ICS.
Thanks for all of your help guys!
Click to expand...
Click to collapse
If ur sticking with touchwiz. I see shostock has many followers. I've never flashed it myself but hear its really good. Don't forget to hit the thanks button for anyone that has helped u. Like MotoMudder
Sent from my SGH-i777 using XDA
brandonarev said:
If ur sticking with touchwiz. I see shostock has many followers. I've never flashed it myself but hear its really good. Don't forget to hit the thanks button for anyone that has helped u. Like MotoMudder
Sent from my SGH-i777 using XDA
Click to expand...
Click to collapse
Yeah he has some really subtle tweaks to the UI that I really like. Thanked everyone who helped of course. Any specific way to install shostock's rom?
reklaimer said:
Yeah he has some really subtle tweaks to the UI that I really like. Thanked everyone who helped of course. Any specific way to install shostock's rom?
Click to expand...
Click to collapse
Just use cwm to flash the zip. Don't forget to wipe afterwards
Sent from my SGH-I777
122ninjas said:
Just use cwm to flash the zip. Don't forget to wipe afterwards
Sent from my SGH-I777
Click to expand...
Click to collapse
Ah thats it? Gonna be so nice. I hope to see a big improvement. Certain things are slow and unresponsive and i KNOW ICS on SGS2's make it alot faster NOT slower.
reklaimer said:
Ah thats it? Gonna be so nice. I hope to see a big improvement. Certain things are slow and unresponsive and i KNOW ICS on SGS2's make it alot faster NOT slower.
Click to expand...
Click to collapse
Yeah there should be a tutorial in the op
Sent from my SGH-I777
122ninjas said:
Yeah there should be a tutorial in the op
Sent from my SGH-I777
Click to expand...
Click to collapse
Ah sorry i see it now. Alot of information on that page, it was towards the end of his post. Thanks. Going to flash it tonight and report back tomorrow.
No body seems to have mentioned it but since you are rooted go to them market and get Titanium Back up. That allows you to back up all of your apps and data then restore it when you get the new ROM flashed.
Nick281051 said:
If you flash a new rom it is required to wipe. It doesn't take that long to set everything up again though as long as you use things like titanium backup
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Tubifex said:
No body seems to have mentioned it but since you are rooted go to them market and get Titanium Back up. That allows you to back up all of your apps and data then restore it when you get the new ROM flashed.
Click to expand...
Click to collapse
Nick281051 did Tubifex. But thanks for the reminder. I have it set to backup once every week, i'll do a backup again tonight to my external SD and restore it all back.
Didn't see anywhere in the thread if the bluetooth was or wasn't working. Just though I'd let you guys know that bluetooth crashes my Tbolt. I've tried it a few times, just turning it on crashes and when I try to view the bluetooth menu. And now I'm stuck in a bootloop. This is my first post and due to the sight rules I can't post on the actual thread, perhaps a mod can move this to it. Otherwise this has been great!
Try flashing the imoseyon kernal. This should fix your Bluetooth issues.
Sent from my ADR6400L using xda app-developers app
You're talking about this one, correct?
http://forum.xda-developers.com/showthread.php?t=1086518
I see that it is a GB kernel and this is an ICS rom. I don't know if that makes a difference. Still pretty new at this, that's why I'm asking.
My apologies. No you cannot use this with ICS. Its early in the morning and thought I read the title to be about Jesters other ROM Jellyblur (GB ROM themed to look like ICS). There are no custom kernals yet for the Thunderbolts ICS until HTC drops the source. I will try to re-create this issue and I will get back with you unless someone gives a solution before me lol. Once again my apologies.
If you are in a bootloop you may have to re-wipe and re-install the ROM. It may have been a bad flash if BT was not working and caused a bootloop.
EDIT: although irrelevent for this ROM, the link you provided is an outdated custom kernal. The Dev has since then updated to 6.2.1
Sent from my ADR6400L using xda app-developers app
Ok cool. I wasn't sure. Good thing I didn't just try it, haha. I ended up wiping it all and reflashing. Haven't tried bluetooth after new install though.
Sent from my ADR6400L using xda app-developers app
So the bluetooth doesnt work with this rom?
As far as I've tried, no. But like baronmxc said, it could be a bad flash. I'm gonna try when I get back from class in a couple hours.
Sent from my ADR6400L using xda app-developers app
Swannyman17 said:
Didn't see anywhere in the thread if the bluetooth was or wasn't working. Just though I'd let you guys know that bluetooth crashes my Tbolt. I've tried it a few times, just turning it on crashes and when I try to view the bluetooth menu. And now I'm stuck in a bootloop. This is my first post and due to the sight rules I can't post on the actual thread, perhaps a mod can move this to it. Otherwise this has been great!
Click to expand...
Click to collapse
Hi,
Well you are in luck I had the exact same problem today and finally found the fix. I was using the . 9 radio was working fine so thought its ok but since bluetooth was my only issue I flashed ( in hboot) the . 19 radio and now no bluetooth problem. Not only turn it on and off able to use it!
Phone has not rebooted once since I did this.
Hope this helps you out,
Bryan
Swannyman, I suggest you to try out what trapperjohn found before you wipe. I have also heard reports of the latest radio fixing these issues also.
Sent from my ADR6400L using xda app-developers app
trapperjohn said:
Hi,
Well you are in luck I had the exact same problem today and finally found the fix. I was using the . 9 radio was working fine so thought its ok but since bluetooth was my only issue I flashed ( in hboot) the . 19 radio and now no bluetooth problem. Not only turn it on and off able to use it!
Phone has not rebooted once since I did this.
Click to expand...
Click to collapse
Is this the radio you're talking about?
http://forum.xda-developers.com/showthread.php?t=1605557
Yes and flash that in hboot
Sent from my ADR6400L using xda app-developers app
Good news! I flashed it and it works great, even sent a file both ways to make sure. Thanks a ton trapperjohn.
Swannyman17 said:
Good news! I flashed it and it works great, even sent a file both ways to make sure. Thanks a ton trapperjohn.
Click to expand...
Click to collapse
Great!
I love it when a plan comes together.
I also notice alot more 4g speed.
That bootloop sucks.
I wonder if this radio came out when the leak was initially released.
Would explain why on gingerbread we didn't see a big change but obviously the minor change in it was for ics.
Thanks,
Bryan
trapperjohn said:
Great!
I love it when a plan comes together.
I also notice alot more 4g speed.
That bootloop sucks.
I wonder if this radio came out when the leak was initially released.
Would explain why on gingerbread we didn't see a big change but obviously the minor change in it was for ics.
Click to expand...
Click to collapse
Yeah, it must have but I'm glad to be out of that mess with the bootloop. Thanks again!
Since the problem got solved...figured I'd jump in with a couple issues that I'm having with this rom.
1* I go into settings and to my apps. When I click an app and it brings up the space used and other info...everything says computing and doesn't show a value. I'm trying to move my apps to the SD and it does nothing since they wont compute. Anybody with this issue...a fix?
2* When I get a SMS, the LED keeps blinking after the message is closed or replied to. It stops after a few minutes, but its annoying. I have GoSMS.
trrubicon06 said:
Since the problem got solved...figured I'd jump in with a couple issues that I'm having with this rom.
1* I go into settings and to my apps. When I click an app and it brings up the space used and other info...everything says computing and doesn't show a value. I'm trying to move my apps to the SD and it does nothing since they wont compute. Anybody with this issue...a fix?
2* When I get a SMS, the LED keeps blinking after the message is closed or replied to. It stops after a few minutes, but its annoying. I have GoSMS.
Click to expand...
Click to collapse
1. Wait and let it total all the apps before entering to move them. It may take a minute if you have a lot of apps.
2. That's a bug with gosms. I never could figure out a fix other than disabling the led notification.
Sent from my ADR6400L using Tapatalk 2
I finally got them moved, but it would take 1-4 minutes a piece to move. And when I try to uninstall an app, it just says uninstalling and hangs on that screen.
trrubicon06 said:
I finally got them moved, but it would take 1-4 minutes a piece to move. And when I try to uninstall an app, it just says uninstalling and hangs on that screen.
Click to expand...
Click to collapse
Hi,
Have you rebooted since installing the rom?
Usually a reboot and waiting 5 after boot corrects this problem.
Thanks,
Bryan
trapperjohn said:
Hi,
Have you rebooted since installing the rom?
Usually a reboot and waiting 5 after boot corrects this problem.
Thanks,
Bryan
Click to expand...
Click to collapse
Yes, a few times. Everything from moving or uninstalling is jacked
trrubicon06 said:
Yes, a few times. Everything from moving or uninstalling is jacked
Click to expand...
Click to collapse
Hi,
What about reseating the sdcard?
Thanks,
Bryan