Hello, i owned a Galaxy S Plus (i9001) and i am running stock i9001xxkpj. And i have flashed many firmwares on the phone and flashed some custom rom's on it. But when i press *#1234# in the dialer it says my CSC is unknown?
The thing is that when i press type *#272*IMEI# on the dial pad on the phone i have the chance to change the CSC to the pre-config. but it says "AUT" and my phone is bought unlocked in Norway and should have "NEE" for the Nordic Countries?
The thing is that i have flashed many firmwares and i flashed a switzerland firmware on there (i9001xxkqb) before. that can be the reason it says "AUT" but i have flashed many other firmwares on there later using ODIN on my PC, and the firmware i am running now should have a Nordic CSC not the "AUT" CSC. My I9001 is not rooted. Its not a very big deal. But the keyboard is not on Norwegian, not ÆØÅ. And i have problems with the APN settings.
So when i press *#1234# on the phone dialer it says:
PDA: I9001XXKPJ
PHONE:I9001XXKPF
CSC:Unknown
And when i press *#272*IMEI# to see how i could change back the CSC it says "AUT" even if i am running a Nordic firmware, HELP!!
So i would be glad if i got some help, have a nice day
Anyone?
There should be an app called 'baseband switcher'. You can switch the base band to your country. But i believe this works only on root
Try this.. http://forum.xda-developers.com/showthread.php?t=1052745
Related
When we hit *#1234# we get the 3 different info.
My question is what does PDA, Phone and CSC stands for? Version for what? What is the significance?
PDA - ROM version
(This is suppose to be a code that tells you what version Android)
Phone - Modem Firmware
(This is suppose to tell you what modem firmware your phone has)
CSC - Region Zone
(This tells you what country the phone is for, including software bundle)
And if i changed the CSC is it going to change any signal preformance !? Or anything !?
Sent from my GT-I9100 using Tapatalk
Csc contains the fata settings for the internet.
If you chamge it yo a different region, your internet may not work properly or at all.
Sent from my GT-I9100 using XDA App
thats what i hear everyone says, but i never had to enter my apn's they always work out of the box, when i flash any stock rom of any region. thus i never cared of CSC.
I don't get it.
I have an argentinian phone.
And I had flashed the CheckROM... Now I have OXAKI4, and everything works OK.
Should I do anything?
Hey,
I am trying to find the appropriate firmware to flash back to stock, but I'm not sure which one to use. What do I base my decision on, the PDA, PHONE, or CSC?
This is the info I get when I hit *#1234#
PDA: I9100XWKL1
PHONE: I9100MUGKG2
CSC: I9100XAKL1
Build Info: Tue Dec 13....
I'm guessing I go by the PDA version, but doesn't the CSC and PHONE also have to match the firmware version as well?
I have a SII which has been imported in to New Zealand, it was 2.3.4, with a SMO CSC
Locally there has just been a 4.0.3 upgrade avaliable, I've downloaded the VNZ (Vodafone NZ) and flashed it with odin.
The upgrade to 4.0.3 went great, but the CSC has remained at SMO, so now Keis is reporting that "your device does not support software upgrading via keis"
PDA: I9100XWLP7
phone:I9100XXLPS
CSC: I9100VNZLP2
I've tried the CSC changes, and this only give me the option of the SMO CSC.
Any idea on how to fix this, I would if possible like to have VNZ as the CSC
Greg
flash ur stock rom,its obivious tht the csc will change wat u expect man...an always hav a efs backd up....
wipe using code, after that if still doesnt change flash againusing odin and wipe again using code.
will work, iv seen ics requires twice flashing for csc fix, GB worked usually with one flash and wipe code
*2767*3855#
Essentially its make your mind up time Stick with Kies and official firmware or use Odin .
This attempt to mix and match does not always work .
jje
Hello,
first, sorry for my Bad English...
So here is my Problem:
Bought S3 in Germany, also CSC = DBT
I flashed Omega V5.1 then i wanted back to origin Firmware, so i used TriangleAway and then flash the original Firmware with DBT (Downloaded it here in the Forum), now the Firmware is on the Phone, but KIES say it is not supportet...
KIES show CSC = EUR
How can this be? I flashed DBT, i can not change it with *#272*imei#, because there is only EUR to select
CAN PLEASE ANYBODY HELP ?!?!?
I recently wanted to change my csc to make my s3 updatable via KIES. Found that if I flashed to the UK (BTU) stock, when I did *#272*imei#, it presented me with many more options than my actual carrier stock.
I used to have an ATL CSC (Vodafone Spain) and I flashed my phone with the German firmware. After flashing it, I still had the ATL CSC but I did a hard reset and now it's DBT. So, I recommend you to do a hard reset but bear in mind you'll lose everything you have: SMS, contacts, etc.
Roastario said:
I recently wanted to change my csc to make my s3 updatable via KIES. Found that if I flashed to the UK (BTU) stock, when I did *#272*imei#, it presented me with many more options than my actual carrier stock.
Click to expand...
Click to collapse
Whst network were you on before?
Hi all,
Sorry for my bad English but I will try to communicate.
I bought a samsung S3 naked in Switzerland.
I flashed a custom rom and then install.
I wanted to return to the original rom that is on the site Samefrimwares
The problem is that on your website, in the CSC section, I did not find the CSC "AUT" of the Swiss rom. I remain blocked on "KOR".
Does anyone by chance have the CSC "AUT" I could flash ? Or should I wait it out?
Thank you in advance for your reply.
nstructions For Changing CSC:
Download Samsung Galaxy S / S2 CSC app from the Play Store https://play.google.com/store/apps/details?id=com.manniakk.cscselector&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5tYW5uaWFray5jc2NzZWxlY3RvciJd
Open Samsung Galaxy S / S2 CSC app
Tap "Change CSC" button
Select the CSC for you Country
Tap "Install" button (Keep in mind changing CSC wipes your device)
OK, I do a mistake when I fash fresh stock rom. Forget to full wipe before new Flash.
Hello,
I have the same issues. I try to have my s3 stock.
What I do for that is Flash via odin single file official firmware and csc stay OTA
I also try to install omega firmware and no luck AUT is not inside
Now I try to get AUT file to Flash in cwm recovery
Or somebody can give me official Switzerland firmware in 3 parts?
The firmware and csc I try to have is :
GT-I9300 Galaxy S III
PDA: I9300XXEMG4
CSC: I9300AUTEMG2
MODEM: I9300XXEMG4
Br
Hi, first post, but have been using all the helpful info from the forums for 6 months now with my TF201, this is related to my new i9300. I'll try to be as descriptive as I can:
Black i9300 purchased last week in the UK, but currently has the TGY (Hong Kong) CSC code. I tried flashing to the UK JB ROM on Sammobile but came back with an unknown CSC error. Fair enough. I followed some instructions i found to get to BTU CSC code:
Flash back to BTU ICS
Flash BTU CSC package
Use Galaxy CSC changer to select BTU
Reboot, now with a fully working ICS build, and BTU CSC (I9300OXAALF2).
However at this point i wasn't able to find any official OTA updates and Kies told me that my device was not compatible with kies updates.
Flashed the original JB UK ROM I downloaded and now i'm back with the unknown CSC.
Any ideas? I've already tried flashing the CSC package onto JB and that's not worked, so now i'm really stumped. As far as I can tell i've removed all HK CSC codes from my device as it was happy as BTU with ICS...
Thanks