Hi XDA,
I'm using dsixda's Kitchen, trying to edit a stock rom (LFB-i9300).
I got everything extracted, but I had to remove the .md5 extension of the stock rom and I had to rename system.img to factoryfs.img, else Kitchen wouldn't recognize the rom. I think something went wrong in this process of getting the rom recognized. I loaded the rom and I chose to add in root, busybox and I de-odexed the files (I chose Api level 14, this is the right one for 4.0.4, right?).
Then I build the rom, zipaligned and signed it and then I moved the zip to my i9300. Then I get this error when I'm trying to flash the rom:
*Installing update...*
E:Error in /emmc/m0_signed_071212_225202.zip (Status 0)
*Installation aborted.*
I know the i9300 isn't officially supported but I was told Kitchen would also work with the i9300.
Btw, when extracting factoryfs.img and the file for CSC, Kitchen said something about crc32 problems, it expected something different than it calculated.
I hope someone could help me solve this problem.
Regards,
dejong12
did you check updater-script file?
Yup, I checked it, but no errors were returned and I couldn't anything in the file itself.
dejong12 said:
Yup, I checked it, but no errors were returned and I couldn't anything in the file itself.
Click to expand...
Click to collapse
can you post updater-script file and the original update-script file please using pastebin
Here are update_script and updater_script.
I read I need an edify file, but does anyone have that premade? I don't know the mount points etc.
dejong12 said:
I read I need an edify file, but does anyone have that premade? I don't know the mount points etc.
Click to expand...
Click to collapse
this the correct updater scripts for gs3 , you need update binary as well
http://pastebin.com/C9ktKbXs
auras76 said:
this the correct updater scripts for gs3 , you need update binary as well
http://pastebin.com/C9ktKbXs
Click to expand...
Click to collapse
Where can I get the correct update binary?
I just have to paste this file into my current updater script?
dejong12 said:
Where can I get the correct update binary?
I just have to paste this file into my current updater script?
Click to expand...
Click to collapse
i will send you
---------- Post added at 11:41 PM ---------- Previous post was at 11:40 PM ----------
dejong12 said:
Where can I get the correct update binary?
I just have to paste this file into my current updater script?
Click to expand...
Click to collapse
https://hotfile.com/dl/163449391/6b7935c/update-binary.html
auras76 said:
i will send you
---------- Post added at 11:41 PM ---------- Previous post was at 11:40 PM ----------
https://hotfile.com/dl/163449391/6b7935c/update-binary.html
Click to expand...
Click to collapse
Thank you for the file! Btw, I don't think I can use this for every rom I want to create if I choose different options, or can I?
dejong12 said:
Thank you for the file! Btw, I don't think I can use this for every rom I want to create if I choose different options, or can I?
Click to expand...
Click to collapse
you can use for every rom for sg3
auras76 said:
you can use for every rom for sg3
Click to expand...
Click to collapse
I've replaced update-binary and updater-script in my finished zip but I'm getting an status 6 error now, could you tell me what I did wrong?
dejong12 said:
I've replaced update-binary and updater-script in my finished zip but I'm getting an status 6 error now, could you tell me what I did wrong?
Click to expand...
Click to collapse
Flash rom again.. after getting the error, go to advanced>report error..
Then reboot your device... you will find a recovery.log file in clockworkmod directory of your sdcard...
There you can spot the error...
adiles said:
Flash rom again.. after getting the error, go to advanced>report error..
Then reboot your device... you will find a recovery.log file in clockworkmod directory of your sdcard...
There you can spot the error...
Click to expand...
Click to collapse
Here's the error report: http://pastebin.com/Yt8BHvrf/
Some lines say ALE8, but that's not the version I'm trying to flash...
The error is here
line 1 col 29: syntax error, unexpected BAD
Upload your script.
I will help you.
Andersondj said:
The error is here
line 1 col 29: syntax error, unexpected BAD
Upload your script.
I will help you.
Click to expand...
Click to collapse
The script I used was posted a few posts ago in this thread.
dejong12 said:
I've replaced update-binary and updater-script in my finished zip but I'm getting an status 6 error now, could you tell me what I did wrong?
Click to expand...
Click to collapse
create a folder named (aur) to rom zip and put boot.img , modem.bin and this file
- https://hotfile.com/dl/163506889/899d8be/flash_image.html
auras76 said:
create a folder named (aur) to rom zip and put boot.img , modem.bin and this file
- https://hotfile.com/dl/163506889/899d8be/flash_image.html
Click to expand...
Click to collapse
This doesn't work for me, I still get that status 6 error.
dejong12 said:
This doesn't work for me, I still get that status 6 error.
Click to expand...
Click to collapse
this is bad zip
auras76 said:
this is bad zip
Click to expand...
Click to collapse
Ok, I tried to rebuild the zip, but I want to make sure, do I have to create that map in the root folder of the zip? And is the name with or without parenthesis?
Related
hi i followed this guide posted here http://forum.xda-developers.com/showthread.php?t=1064074
but i dont understand the script part i downloaded the cm7 rom and opened the script in that with note pad and changed it to the one from the guide but when i install the rom i get
"E:Syntac error in update-script"
Installation aborted.
so can someone tell me what im doing wrong
sorry if its in the wrong forum but i thought since its x10 development then i should ask here mods feel free to delete
and i know im going to get people saying i shouldn't try this unless i know what im doing but i have a spare x10 so just wanna give it a try
thanks for any help
rls190687 said:
hi i followed this guide posted here http://forum.xda-developers.com/showthread.php?t=1064074
but i dont understand the script part i downloaded the cm7 rom and opened the script in that with note pad and changed it to the one from the guide but when i install the rom i get
"E:Syntac error in update-script"
Installation aborted.
so can someone tell me what im doing wrong
sorry if its in the wrong forum but i thought since its x10 development then i should ask here mods feel free to delete
and i know im going to get people saying i shouldn't try this unless i know what im doing but i have a spare x10 so just wanna give it a try
thanks for any help
Click to expand...
Click to collapse
How come you didn't post it there instead of creating an entirely new thread
Sent from my X10project using XDA App
can u post the contents of the update-script here?
also are u using amend or edify syntax?
rls190687 said:
hi i followed this guide posted here http://forum.xda-developers.com/showthread.php?t=1064074
but i dont understand the script part i downloaded the cm7 rom and opened the script in that with note pad and changed it to the one from the guide but when i install the rom i get
"E:Syntac error in update-script"
Installation aborted.
so can someone tell me what im doing wrong
sorry if its in the wrong forum but i thought since its x10 development then i should ask here mods feel free to delete
and i know im going to get people saying i shouldn't try this unless i know what im doing but i have a spare x10 so just wanna give it a try
thanks for any help
Click to expand...
Click to collapse
The Tutorial is for MIUI 2.2 so why you use it on CM 7 (2.3)?
DooMLoRD said:
can u post the contents of the update-script here?
also are u using amend or edify syntax?
Click to expand...
Click to collapse
update-script (7.17 KB) http://www.multiupload.com/KF64P2PXIR
updater-script (15.91 KB) http://www.multiupload.com/PSIF0CNN6I
update-binary (254.04 KB) http://www.multiupload.com/C4UNKXBW32
these are the files from the 2 roms
the 1st on is js script
Delete updater-script and update-binary
rdannar said:
make sure you delet updater and update binary from folder and replace with update-script
Click to expand...
Click to collapse
realunited123 said:
Delete updater-script and update-binary
Click to expand...
Click to collapse
tryed that followed the guide
the 2 roms im trying to mix are
cm7 js rom
and
RCMixS_v1.1_++_CM7Hboot
http://forum.xda-developers.com/showthread.php?t=988570
its probly not ganna work but 4t id give it a try
rls190687 said:
tryed that followed the guide
the 2 roms im trying to mix are
cm7 js rom
and
RCMixS_v1.1_++_CM7Hboot
http://forum.xda-developers.com/showthread.php?t=988570
its probly not ganna work but 4t id give it a try
Click to expand...
Click to collapse
Sense! Its probably not going to boot with that tutorial. Better to try with an AOSP build.
rls190687 said:
update-script (7.17 KB) http://www.multiupload.com/KF64P2PXIR
updater-script (15.91 KB) http://www.multiupload.com/PSIF0CNN6I
update-binary (254.04 KB) http://www.multiupload.com/C4UNKXBW32
these are the files from the 2 roms
the 1st on is js script
Click to expand...
Click to collapse
u need only amend script (update-script)
here is the modified one:
http://dl.dropbox.com/u/8691868/test/update-script
please test it...
also u are certain of the following things:
1) toolbox binary is copied to /system/bin
2) busybox binary is copied to to /system/bin or /system/xbin
3) iwmulticall binary is copied to to /system/xbin
DooMLoRD said:
u need only amend script (update-script)
here is the modified one:
http://dl.dropbox.com/u/8691868/test/update-script
please test it...
also u are certain of the following things:
1) toolbox binary is copied to /system/bin
2) busybox binary is copied to to /system/bin or /system/xbin
3) iwmulticall2 binary is copied to to /system/xbin
Click to expand...
Click to collapse
thanks ill test it now
the files are there in the right folders
iwmulticall2 is just called iwmulticall
tho
DooMLoRD said:
u need only amend script (update-script)
here is the modified one:
http://dl.dropbox.com/u/8691868/test/update-script
please test it...
also u are certain of the following things:
1) toolbox binary is copied to /system/bin
2) busybox binary is copied to to /system/bin or /system/xbin
3) iwmulticall2 binary is copied to to /system/xbin
Click to expand...
Click to collapse
thanks i tested it
i get
e:cant symlink /system/bin/reboot
e:failure at line 29:
symlink toolbox system:bin/reboot
i checked the files and the reboot file is in the bin folder
rls190687 said:
thanks i tested it
i get
e:cant symlink /system/bin/reboot
e:failure at line 29:
symlink toolbox system:bin/reboot
i checked the files and the reboot file is in the bin folder
Click to expand...
Click to collapse
well then u have to manually check every file of the update.zip in /system/bin & /system/xbin to verify that there are no files with same name as the new symbolic links that are being created...
View attachment META-INF.rar
here is one to compare and remember to use notepad++ to edit, not regular notepad
if you get a can't symlink error
that means the file is still in the folder
when that happens you can do one of two things.. on delete the line from update script
or two... the one I prefer... delete the file from the actuall rom folder
ex.. cannot symlink ifconfig
I would go to bin and delete ifconfig
another tip is once the rom starts installing you will want to install another rom that is working... the farther you get in the installation the better the chances are you messed up it going into recovery... then you can be sure that after the error you reboot into recovery.. this has saved me many times of having to reflash the whole bb with flashtool wich takes a lot longer than a recovery restore
Does somebody know if Touchwiz 4 will work on the Ace?
http://forum.xda-developers.com/showthread.php?t=1077641
Hope so!
Sent from my GT-S5830 using XDA Premium App
dude i am ready to take risk but how to install
boot into recovery and installthe .zip
wont't work its a clockworkmod installation package...
Yeah thought so
Sent from my GT-S5830 using XDA Premium App
kills999 said:
wont't work its a clockworkmod installation package...
Click to expand...
Click to collapse
just replace file update-binary from file for root gingerbread upd_1.zip and it will work....
ingbrzy said:
just replace file update-binary from file for root gingerbread upd_1.zip and it will work....
Click to expand...
Click to collapse
can you please post the file?
ingbrzy said:
just replace file update-binary from file for root gingerbread upd_1.zip and it will work....
Click to expand...
Click to collapse
dude can u send me the link
Here extract update-binary with winrar and replace... I didnt test it... it will just allow install zip file with touchwiz without clockwork...
but file with touchwiz 4 is for 240dpi and SGA has 160dpi... So I am not sure if it will work properly...
so we will need some voluntary testers
so we will need some voluntary testers
dude i am ready just give me the files.....
Try it... file with replaced update-binary is HERE
reboot to recovery mode and apply .zip file...
I didnt try, so good luck...
ingbrzy said:
Try it... file with replaced update-binary is HERE
reboot to recovery mode and apply .zip file...
I didnt try, so good luck...
Click to expand...
Click to collapse
waiting for results
You wanted it!
Sent from my GT-S5830 using XDA Premium App
ingbrzy said:
Try it... file with replaced update-binary is HERE...
Click to expand...
Click to collapse
instalation aborted...
error in /tmp/sideload/package.zip (status 0)
during installation writes... TouchWiz4 for Tab
cult007 said:
instalation aborted...
error in /tmp/sideload/package.zip (status 0)
during installation writes... TouchWiz4 for Tab
Click to expand...
Click to collapse
Try again with attached files....
182dpi try first....
if it will not install automatically at recovery mode, you can add files manually with root explorer to the folder:
system / app /
system / lib /
sorry no success... i copied files with rootexplorer... wiped twlauncher's and dalvik's cache... set the rights
...there is just blank screen and after a minute FC
cult007 said:
sorry no success... i copied files with rootexplorer... wiped twlauncher's and dalvik's cache... set the rights
...there is just blank screen and after a minute FC
Click to expand...
Click to collapse
So, now we know TW4 is not working on SGA...
possible that the problem is here...
[tutorial] manually moving apps to /system/app
Requirements:
- Rooted SGA
- File Explorer with Root permission (i'm using File Expert)
NOTE: I was only successful in moving apps/games without 'lib' linked to them
Click to expand...
Click to collapse
Hi guys, i created my first own rom but while flashing it with TWRP 2.5 i get error "Error executing update binary in the zip"
So is there any solution?
First see you are properly rooted by using root checker.
Also it may be the problem of TWRP . Try flashing it through cwm.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 04:28 AM ---------- Previous post was at 04:26 AM ----------
I faced this problem twice with a particular rom using twrp. I used cwm and it worked fine.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 04:44 AM ---------- Previous post was at 04:28 AM ----------
Try downgrading the twrp version to 2.3
Sent from my Micromax A116 using xda app-developers app
princechandela said:
Hi guys, i created my first own rom but while flashing it with TWRP 2.5 i get error "Error executing update binary in the zip"
So is there any solution?
Click to expand...
Click to collapse
In between of updater script try to print some texts at various places to identify the reason and then you can work to resolve the error. It will give you a hint of the problem Happy porting.
No!
I think you are not understanding my problem. My problem is when I create stock ROM from kitchen and flash it I get error as I mentioned in first post.
princechandela said:
I think you are not understanding my problem. My problem is when I create stock ROM from kitchen and flash it I get error as I mentioned in first post.
Click to expand...
Click to collapse
i understood , that is the reason i suggested.
rajneeshk said:
i understood , that is the reason i suggested.
Click to expand...
Click to collapse
OK I got your point now and I found the error the error at the beginning of the script as soon as script starts trap shows update-binary error. Now what?
princechandela said:
OK I got your point now and I found the error the error at the beginning of the script as soon as script starts trap shows update-binary error. Now what?
Click to expand...
Click to collapse
Please share your updater script.
Sent from my Micromax A116i using XDA Premium 4 mobile app
rajneeshk said:
Please share your updater script.
Sent from my Micromax A116i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
here is the script :
princechandela said:
here is the script :
Click to expand...
Click to collapse
1. I hope you only used notepad++ or editplus to modify updater script and build.prop ( notepad will corrupt these files)
2. Try replacing your META-INF folder with the ROM you were able to flash succesfully on your device ( do modifications as per your need in updater script)
3. please ensure files like marked in green color i.e. symlink("dumpstate", are present in system\bin folder
4. please ensure files like marked in red color i.e. symlink("toolbox", "/system/bin/restorecon"); are not present in their respective locations.
5. all files written under set_perm or set_perm_recursive should be present in their respective locations.
6. please insert ui_print("line number x ") after each line so that you get to know which line has caused the error.
Hope, i am clear
rajneeshk said:
1. I hope you only used notepad++ or editplus to modify updater script and build.prop ( notepad will corrupt these files)
2. Try replacing your META-INF folder with the ROM you were able to flash succesfully on your device ( do modifications as per your need in updater script)
3. please ensure files like marked in green color i.e. symlink("dumpstate", are present in system\bin folder
4. please ensure files like marked in red color i.e. symlink("toolbox", "/system/bin/restorecon"); are not present in their respective locations.
5. all files written under set_perm or set_perm_recursive should be present in their respective locations.
6. please insert ui_print("line number x ") after each line so that you get to know which line has caused the error.
Hope, i am clear
Click to expand...
Click to collapse
i got your point one quest are my location right in format command and mount command?
EDIT:
i didn't your step 6 and i replaced the update binary file and now my rom is flashing correctly but can you tell me what was the error with update-binary file? it was the file created by kitchen.
script even don't start executing and before it i get "error executing update-binary" any help?
princechandela said:
script even don't start executing and before it i get "error executing update-binary" any help?
Click to expand...
Click to collapse
have you taken care notepad++ and meta-inf folder?
rajneeshk said:
have you taken care notepad++ and meta-inf folder?
Click to expand...
Click to collapse
I got success by using option 2 in kitchen(lazy mode) the the zip is now flashing but now my question is should i edit update script after zip is created and signed?
princechandela said:
I got success by using option 2 in kitchen(lazy mode) the the zip is now flashing but now my question is should i edit update script after zip is created and signed?
Click to expand...
Click to collapse
if you are able to flash , why you want to edit updater script?
rajneeshk said:
if you are able to flash , why you want to edit updater script?
Click to expand...
Click to collapse
I just want to add some ui print command and the apks in data folder are not flashing because the dont have right location in the script
princechandela said:
I just want to add some ui print command and the apks in data folder are not flashing because the dont have right location in the script
Click to expand...
Click to collapse
You can modify the updater script and then can zip and sign again.
Sent from my Micromax A116i using XDA Premium 4 mobile app
Just replace the updater-binary from any other zip and you are good to go. Kitchen has known problems with updater-scripts
SaketJoshi said:
Just replace the updater-binary from any other zip and you are good to go. Kitchen has known problems with updater-scripts
Click to expand...
Click to collapse
I replaced updater binary from some other some other stock rom zip from a116 but it didnt work.
princechandela said:
I replaced updater binary from some other some other stock rom zip from a116 but it didnt work.
Click to expand...
Click to collapse
copy whole META-INF folder from stock.zip to your zip. After that, modify the script.
rajneeshk said:
You can modify the updater script and then can zip and sign again.
Sent from my Micromax A116i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't know but i am again getting this problem even if i use option 2(lazy mode) in kitchen.
I did everything again from scratch but i am still getting error executing update binary error.
i have made rom for my s duos using xda kitchenn but i get status 1 error when i flash the rom
i have searched a lot but i can't find satisfied answer
can any one help me solve this error?
i'm using this guide
http://forum.xda-developers.com/showthread.php?t=1801690
Vaibhav Chauhan said:
i have made rom for my s duos using xda kitchenn but i get status 1 error when i flash the rom
i have searched a lot but i can't find satisfied answer
can any one help me solve this error?
i'm using this guide
http://forum.xda-developers.com/showthread.php?t=1801690
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2230733
Status 1 Error:
"Well this is one of the most rarest error that a person can get...but with my experience I came to know that this occurs because you don't have correct permissions set. Use correct perms in updater-script and done "
Grab another rom that is the same base you are using and look at the META-INF/com/google/android folder which contains the updater script and binary to use as your reference points. Compare and contrast yours with that one.
es0tericcha0s said:
http://forum.xda-developers.com/showthread.php?t=2230733
Status 1 Error:
"Well this is one of the most rarest error that a person can get...but with my experience I came to know that this occurs because you don't have correct permissions set. Use correct perms in updater-script and done "
Grab another rom that is the same base you are using and look at the META-INF/com/google/android folder which contains the updater script and binary to use as your reference points. Compare and contrast yours with that one.
Click to expand...
Click to collapse
can i use another rom's updater script in my rom which has same base??
Should be able to. Wouldn't hurt to look at the differences though so then you can understand what things affect the install to help build knowledge.
es0tericcha0s said:
Should be able to. Wouldn't hurt to look at the differences though so then you can understand what things affect the install to help build knowledge.
Click to expand...
Click to collapse
i tried to replace updater script but not working
i also have tried to compare set perms but i am unable to find fault in it
@es0tericcha0s
please tell me what to do??
Sorry, that was my main idea. Are you getting the same error code? Did you unzip and re-zip the rom? If so, you should use an archive manager like 7zip to move the update script into the zip without needing to unzip the whole thing, otherwise you'll break the signature on the rom and have to re-sign it.
es0tericcha0s said:
Sorry, that was my main idea. Are you getting the same error code? Did you unzip and re-zip the rom? If so, you should use an archive manager like 7zip to move the update script into the zip without needing to unzip the whole thing, otherwise you'll break the signature on the rom and have to re-sign it.
Click to expand...
Click to collapse
actually i am using android kitchen to make the rom
and when i use the cosmic rom's updater script in it the status 1 error was solved
but it stuck on boot animation
@es0tericcha0s
my stuck on bootloops can you tell me how to logcat?
Vaibhav Chauhan said:
@es0tericcha0s
my stuck on bootloops can you tell me how to logcat?
Click to expand...
Click to collapse
Not all phones have adb access while in a bootloop. But to do so you would need adb set up on your computer, change directories to the adb folder (or if it's enabled globally, then where ever), and type:
adb logcat
You'll want to save it somewhere like:
http://pastebin.com/
and upload the link.
I am not skilled at reading logcats, so not sure if I can be of any more help after that.
If you don't have adb set up already, then just use this one: http://forum.xda-developers.com/showthread.php?t=2317790
From Sammobile new 4.4.2 P5210XXUBNH1
Luxor said:
From Sammobile new 4.4.2 P5210XXUBNH1
Click to expand...
Click to collapse
http://samsung-updates.com/device/
there is the download link i am downloading it right now.
will it work on my dutch tab 3 10.1?
damian312 said:
http://samsung-updates.com/device
there is the download link i am downloading it right now.
will it work on my dutch tab 3 10.1?
Click to expand...
Click to collapse
downloading now too, please report!
Downloading.
nowo said:
downloading now too, please report!
Click to expand...
Click to collapse
I am a little afraid to test it.
Do i have to flash through odin?
hey,
if you guys are hesitant, i'll test it. give me a couple of hours to get it and do the usual
@Restl3ss - dude OP look !
m
moonbutt74 said:
hey,
if you guys are hesitant, i'll test it. give me a couple of hours to get it and do the usual
@Restl3ss - dude OP look !
m
Click to expand...
Click to collapse
You are the man.
i wait for it
dead link bud!
RoninTPD said:
dead link bud!
Click to expand...
Click to collapse
http://samsung-updates.com/device/
not that hard to fix it:good:
Installing. can't wait to pull it apart.
CAG-man said:
Installing. can't wait to pull it apart.
Click to expand...
Click to collapse
cag,
when you are go can you pull the /system/vendor directory and post it?
also /system/bin/toolbox ?
my download just started , i can't wait !!
m
M,
I will do so.
Holy crap, finally!
damian312 said:
http://samsung-updates.com/device/
not that hard to fix it:good:
Click to expand...
Click to collapse
thanks!!:good:
CAG-man said:
Installing. can't wait to pull it apart.
Click to expand...
Click to collapse
Does it work?
The firmware works, but two things are proving to be very difficult.
one is extracting system.img, i dont know what's different, but the method i used for the 4.2 firmwares just crashes now.
two, and this is a big one
rooting it..
working on it
edit: super SU 1.9.4 zip from chainfire worked. No other method works though, the superuser apk will install but the binary doesn't stick
edit 2: successfully extracted the system image
notes
hey,
if the update with the t211 was any indication, be sure to only write boot.img and system.img
i am making a flashable zip and will post after i get it right and debloated and get the script correct.
realistically, sometime tomorrow, will update.
@Restl3ss okay so iam laughing at myself right now becuase i can not get the damned thing to write. i don't use windows
so no odin. i have tried dd writing the images but on boot i hang at logo and with no adb i can't get a visual on the problem.
i have a .zip put together to do the same and get the same. i have another zip set up ota style but can't script worth a damn.
can you whip up a script and post it?
an interesting note- in /sbin is a binary file named partlink. thoughts?
Restl3ss
@Restl3ss
okay so this is the joke
i am too poor to upload a large file to devhost. :laugh:
solution - i going to upload the otapackge for the firmware WITHOUT the system folder.
the package has the modified to unsecure boot.img and the updater script which just happens to be the
same one i am using for cm11 :laugh: :victory:
these are the instructions for converting, mounting and pulling the system image into an cwm flashable zip
to convert and mount sparse .img in terminal
simg2img system.img system.img.ext4
mount -o loop system.img.ext4 /a/directory
then nav to that directory in file browser, copy the contents of /system and insert in to package.
there is also a second step to correct issues with symlinks in vendor. drop that package into ota second
sorry for the inconvenience. it's in your folder with the patches.
but hey, i'm poor.
m
i'm running it right now and it seems very kitkatty
If i flash 4.4 can i still flash back to 4.2.2?
moonbutt74 said:
@Restl3ss
okay so this is the joke
i am too poor to upload a large file to devhost. :laugh:
solution - i going to upload the otapackge for the firmware WITHOUT the system folder.
the package has the modified to unsecure boot.img and the updater script which just happens to be the
same one i am using for cm11 :laugh: :victory:
these are the instructions for converting, mounting and pulling the system image into an cwm flashable zip
to convert and mount sparse .img in terminal
simg2img system.img system.img.ext4
mount -o loop system.img.ext4 /a/directory
then nav to that directory in file browser, copy the contents of /system and insert in to package.
there is also a second step to correct issues with symlinks in vendor. drop that package into ota second
sorry for the inconvenience. it's in your folder with the patches.
but hey, i'm poor.
m
i'm running it right now and it seems very kitkatty
Click to expand...
Click to collapse
got it system folder is properly extracted and what not, trying to deodex. About 10 apks are failing on every deodex attempt, can't figure out why. Gonna upload a 100% stock to xda anyway, deodexed + rooted will just have to come a bit later.