Juopunutbear S-OFF need help ASAP Please - HTC Rezound

I used HTC unlocker to unlock my phone and installed cleanrom by scott. I need to send my phone back for repair so I HAVE to restore it to stock before I can send it back. I used Juopunutbear and it failed several times. Now my phone seems to be bricked. ControlBEAR.exe is reporting
Cowardly refusing to S-OFF this phone
Error code is: 4E D7 B9 21
Quit....
Press ENTER to exit.....
all I can get to is the fastboot/hboot menu and it says at the top
***LOCKED***
S-OFF
However I cant install anything or get to recovery or anything else. if I reboot the phone it just takes me back to the fastboot menu
I need by phone back up can someone please help me....

scampbell70 said:
I used HTC unlocker to unlock my phone and installed cleanrom by scott. I need to send my phone back for repair so I HAVE to restore it to stock before I can send it back. I used Juopunutbear and it failed several times. Now my phone seems to be bricked. ControlBEAR.exe is reporting
Cowardly refusing to S-OFF this phone
Error code is: 4E D7 B9 21
Quit....
Press ENTER to exit.....
all I can get to is the fastboot/hboot menu and it says at the top
***LOCKED***
S-OFF
However I cant install anything or get to recovery or anything else. if I reboot the phone it just takes me back to the fastboot menu
I need by phone back up can someone please help me....
Click to expand...
Click to collapse
Looks like you may be S-off. Try downloading a stock GB Ruu, renaming to ph98img and put it on the root of your sd card. Reboot and hboot should install it. It will take a while and a reboot once before finishing.

topgun1953 said:
Looks like you may be S-off. Try downloading a stock GB Ruu, renaming to ph98img and put it on the root of your sd card. Reboot and hboot should install it. It will take a while and a reboot once before finishing.
Click to expand...
Click to collapse
I dont have a card reader or extra sdcard so how do I get a stock GB Ruu onto the sdcard?

scampbell70 said:
I dont have a card reader or extra sdcard so how do I get a stock GB Ruu onto the sdcard?
Click to expand...
Click to collapse
You should be able to do a fastboot push.
What would work better would be to fastboot flash Amon-Ra, then you can mount the SD as mass storage.
Sent from my Business ICS Rezound.

scampbell70 said:
I dont have a card reader or extra sdcard so how do I get a stock GB Ruu onto the sdcard?
Click to expand...
Click to collapse
I'm not big on ADB or Fastboot so I can't tell you how using those tools. However, when I needed to recover after several failed s-off attempts, I used this all in one tool and just selected Flash AmonRa recovery.
Then I would boot into recovery, AmonRa has an option to toggle USB to SD card, so then you could copy whatever from your computer to the SD card.
http://forum.xda-developers.com/showthread.php?t=1504824&highlight=all+in+one

Thank you everyone that helped

You can also do the PH98IMG.zip thing this way:
1) Put PH98IMG.zip in fastboot folder
2) fastboot oem rebootRUU
3) fastboot flash zip PH98IMG.zip
4) Wait a long time, when the prompt returns control to you it is done
5) fastboot reboot
6) Let it fire up and all that jazz
7) Then do "fastboot writesecureflag 3" and you will be 100% stock

con247 said:
You can also do the PH98IMG.zip thing this way:
1) Put PH98IMG.zip in fastboot folder
2) fastboot oem rebootRUU
3) fastboot flash zip PH98IMG.zip
4) Wait a long time, when the prompt returns control to you it is done
5) fastboot reboot
6) Let it fire up and all that jazz
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
Click to expand...
Click to collapse
Note that, if I recall correctly, this:
Code:
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
Will return you to S-On

LunaticSerenade said:
Note that, if I recall correctly, this:
Code:
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
Will return you to S-On
Click to expand...
Click to collapse
I believe you're correct. Pretty sure that's in the Dev board about getting S-On, and that's the command to run.

LunaticSerenade said:
Note that, if I recall correctly, this:
Code:
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
Will return you to S-On
Click to expand...
Click to collapse
He is trying to return it so I assume that is the goal.

con247 said:
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
Click to expand...
Click to collapse
Okay I downloaded a stock signed RUU renamed it and put it on the root of my sdcard, when I rebooted the phone the phone recognized and I applied the update. It booted up perfectly and the phone is back on stock GB, I dont see where to writesecureflag though, did I have to do that before I let the phone boot all the way into the OS for the first time? Under the fastboot menu I see no option to writesecureflag, do I need to reflash the stock RUU and start again?

scampbell70 said:
Okay I downloaded a stock signed RUU renamed it and put it on the root of my sdcard, when I rebooted the phone the phone recognized and I applied the update. It booted up perfectly and the phone is back on stock GB, I dont see where to writesecureflag though, did I have to do that before I let the phone boot all the way into the OS for the first time? Under the fastboot menu I see no option to writesecureflag, do I need to reflash the stock RUU and start again?
Click to expand...
Click to collapse
you will need to fastboot oem writesecureflag 3 in a cmd window with the phone in fastboot:
directoins: http://forum.xda-developers.com/showthread.php?t=1612937

scotty1223 said:
you will need to fastboot oem writesecureflag 3 in a cmd window with the phone in fastboot:
directoins: http://forum.xda-developers.com/showthread.php?t=1612937
Click to expand...
Click to collapse
I tried writing S-On but I keep getting the error device offline. I used
There are 4 ways to do it:
Unplug the usb and plug it back again.
Go to the Settings -> Applications -> Development of your device and uncheck the USB debugging mode and then check it again back!
Restart the adb on your PC. adb kill-server and then adb start-server
Restart your device and try again.
Click to expand...
Click to collapse
to try and fix it but no luck it still says offline, any ideas??

scampbell70 said:
I tried writing S-On but I keep getting the error device offline. I used
to try and fix it but no luck it still says offline, any ideas??
Click to expand...
Click to collapse
You will need to be in fastboot. Pull the battery, then reboot holding volume down.
*Note: make sure there is no PH98IMG.zip on your SD card
Once in hboot, select fastboot. Then connect to your PC.
In your command prompt/adb window, type 'fastboot devices' to make sure your PC reads the phone.
Then type 'fastboot oem writesecureflag 3' and you'll be S-On.
Sent from my Business ICS Rezound.

Phone is all back to stock and shipped back for repairs thank you all very much for your help

Related

having major issue

So i plugged in my phone to my pc, and all of a sudden it rebooted into the bootloader... re locked itself, and now only reboots into the bootloader?! i dunno what happened or how it got this way...but now I can't do anything!
What was the last thing you did to your phone before that? Do you have a PHzip file on your ext sd card?
Not sure how it would relock... can you get into fastboot and try to unlock again? Try doing a battery pull first.
feralicious said:
What was the last thing you did to your phone before that? Do you have a PHzip file on your ext sd card?
Not sure how it would relock... can you get into fastboot and try to unlock again? Try doing a battery pull first.
Click to expand...
Click to collapse
i can get into fastboot... i try to fastboot oem unlock and it doesn't work...and it doesn't reconize my phone when i adb devices
Oh, that's not the unlock command. Try this (assuming you still have the Unlock_code.bin file, otherwise you have to go through the process of getting a token again):
fastboot flash unlocktoken Unlock_code.bin
adb is just for when you're booted into the phone. You can type:
fastboot devices
So... it really says Relocked at the top in pink? Does it also say Security Warning?
feralicious said:
Oh, that's not the unlock command. Try this (assuming you still have the Unlock_code.bin file, otherwise you have to go through the process of getting a token again):
fastboot flash unlocktoken Unlock_code.bin
adb is just for when you're booted into the phone. You can type:
fastboot devices
So... it really says Relocked at the top in pink? Does it also say Security Warning?
Click to expand...
Click to collapse
yeah although the command u gave me for the unlock worked...but still just boots into bootloader//
do you know the command to push a ROM or Recovery img via fastboot?
Recovery:
fastboot flash recovery nameofrecoveryfile.img
And you're sure you don't have a PHzip file on your sd card? That will cause the phone to boot to bootloader.
feralicious said:
Recovery:
fastboot flash recovery nameofrecoveryfile.img
And you're sure you don't have a PHzip file on your sd card? That will cause the phone to boot to bootloader.
Click to expand...
Click to collapse
positve, in fact my sd is brand spanking new
phillybizzle said:
positve, in fact my sd is brand spanking new
Click to expand...
Click to collapse
Problem solved Thanks for your help...MODS please lock and close
How was problem solved?
Can you describe how you resolved your problem in case someone else has a similar situation?

sd card not recognized s-off

After attempting s-off my sd card is not recognized. It happened to 2 of them. My computer wont read them and control bear cannot write to them. And now im stuck on juopunutBear logo. ANy help would be great considering I cant use my phone now.
iflawdya said:
After attempting s-off my sd card is not recognized. It happened to 2 of them. My computer wont read them and control bear cannot write to them. And now im stuck on juopunutBear logo. ANy help would be great considering I cant use my phone now.
Click to expand...
Click to collapse
Download this:
http://dl.dropbox.com/u/14779955/jb_hboot.zip MD5: b05336c08f709bf0a909205bcb95b951
but the file in the adb folder where you use cmd
Put the phone in fastboot mode, then run the follwoing commands:
Code:
fastboot oem rebootRUU
fastboot flash zip jb_hboot.zip
fastboot reboot
iflawdya said:
After attempting s-off my sd card is not recognized. It happened to 2 of them. My computer wont read them and control bear cannot write to them. And now im stuck on juopunutBear logo. ANy help would be great considering I cant use my phone now.
Click to expand...
Click to collapse
You haven't got s-off right? You got stuck there while trying to?
Sent from my HTC Vigor
Andro X said:
You haven't got s-off right? You got stuck there while trying to?
Sent from my HTC Vigor
Click to expand...
Click to collapse
Correct. Not there and screwed up 2 16gb cards in the process.
iflawdya said:
Correct. Not there and screwed up 2 16gb cards in the process.
Click to expand...
Click to collapse
You should only have used the one. It seems others have been able to correct the issue by simply reformatting the card with the phone, not via a USB connection to a computer.
a.mcdear said:
You should only have used the one. It seems others have been able to correct the issue by simply reformatting the card with the phone, not via a USB connection to a computer.
Click to expand...
Click to collapse
How would I reformat the card with the phone? I am stuck at juopunutbear screen. I can only get to fastboot screen. From there it says no image.
iflawdya said:
How would I reformat the card with the phone? I am stuck at juopunutbear screen. I can only get to fastboot screen. From there it says no image.
Click to expand...
Click to collapse
download a kernel, flash it from fastboot. Then reboot, and your ROM will load. Then fix the SDCARD, and try again.
cflo360 said:
Download this:
http://dl.dropbox.com/u/14779955/jb_hboot.zip MD5: b05336c08f709bf0a909205bcb95b951
but the file in the adb folder where you use cmd
Put the phone in fastboot mode, then run the follwoing commands:
Code:
fastboot oem rebootRUU
fastboot flash zip jb_hboot.zip
fastboot reboot
Click to expand...
Click to collapse
cflo360 when I get to fastboot flash zip jb_hboot.zip it gets an erroe that says failed remote: 99 unknown fail. Any ideas? Would it be possible to just put a rom on another sd card and flash it?
a.mcdear said:
download a kernel, flash it from fastboot. Then reboot, and your ROM will load. Then fix the SDCARD, and try again.
Click to expand...
Click to collapse
sorry I was typing a question and did not see what you wrote before I sent it.
a.mcdear said:
download a kernel, flash it from fastboot. Then reboot, and your ROM will load. Then fix the SDCARD, and try again.
Click to expand...
Click to collapse
I know im asking alot but could you tell me how to flash a kernel from fastboot. I have only done it from the phone.
Thanks
iflawdya said:
I know im asking alot but could you tell me how to flash a kernel from fastboot. I have only done it from the phone.
Thanks
Click to expand...
Click to collapse
Pull your battery.. reinsert and hold volume down and the power button. Make sure phone is plugged in or replug in phone if you took it off to reboot. Should be in Hboot now, press power to select fastboot if it is white lettering over blue background. If it is red background your already in fastboot and if connected should say fastbootusb.
1. open a copy of the rom your on either with 7 zip or since your not adding anything to it unzip it .
2. find the folder that says kernel, now you will either see a PH98IMG.zip or you will see a file that his white with a silver circle called boot. That is the raw boot.img. If it is the ph zip simply unzip it and you will see the boot.img.
3. Now , remove the boot.img and place it in the same folder your fastboot is located , generally the place you unlocked with.
4. Then, bring up a command prompt the same way you did to unlock. change directory if needed by cd c:\thenthenameofthefoldrecontainingfastboot.
5. Simply type fastboot boot boot.img
6. you will see sending " size of img".. receiving "size of img ", then writing .. and it will end and tell you how many seconds it took.
Now, simply use the reboot selection from bootloader or with the command prompt type abd reboot and your phone should reboot and you will be back on your rom.
The reason you keep booting to the jBear screen is because the jBear process replaced your KERNEL. You need to find the kernel img file for YOUR operating system or ROM. If you are on GB, find a GB kernel. If on the ICS Leak, you need to find the ICS Leak kernel. If on a ROM, get that ROM's kernel file.
Then the commands on the PC are:
fastboot flash boot boot.img
fastboot reboot
Another option is to use Hansoon's Rezound All-in-one-kit to flash the stock kernel for you.
Howard
iflawdya said:
I know im asking alot but could you tell me how to flash a kernel from fastboot. I have only done it from the phone.
Thanks
Click to expand...
Click to collapse
no offense, but if you honestly cannot at least search to figure out how to do a fastboot command as simple as fastboot flash, then you should stay clear of s-off...
but that's my opinion.
and I'm really not saying this to be an ass.
just don't want to see you brick your phone.
mjh68 said:
Pull your battery.. reinsert and hold volume down and the power button. Make sure phone is plugged in or replug in phone if you took it off to reboot. Should be in Hboot now, press power to select fastboot if it is white lettering over blue background. If it is red background your already in fastboot and if connected should say fastbootusb.
1. open a copy of the rom your on either with 7 zip or since your not adding anything to it unzip it .
2. find the folder that says kernel, now you will either see a PH98IMG.zip or you will see a file that his white with a silver circle called boot. That is the raw boot.img. If it is the ph zip simply unzip it and you will see the boot.img.
3. Now , remove the boot.img and place it in the same folder your fastboot is located , generally the place you unlocked with.
4. Then, bring up a command prompt the same way you did to unlock. change directory if needed by cd c:\thenthenameofthefoldrecontainingfastboot.
5. Simply type fastboot boot boot.img
6. you will see sending " size of img".. receiving "size of img ", then writing .. and it will end and tell you how many seconds it took.
Now, simply use the reboot selection from bootloader or with the command prompt type abd reboot and your phone should reboot and you will be back on your rom.
Click to expand...
Click to collapse
mjh68 I LOVE YOU MAN!! Thank you so much.
HowardZ said:
The reason you keep booting to the jBear screen is because the jBear process replaced your KERNEL. You need to find the kernel img file for YOUR operating system or ROM. If you are on GB, find a GB kernel. If on the ICS Leak, you need to find the ICS Leak kernel. If on a ROM, get that ROM's kernel file.
Then the commands on the PC are:
fastboot flash boot boot.img
fastboot reboot
Another option is to use Hansoon's Rezound All-in-one-kit to flash the stock kernel for you.
Howard
Click to expand...
Click to collapse
I tried the all in one and it did not work. I was stuck at htc splash screen.
andybones said:
no offense, but if you honestly cannot at least search to figure out how to do a fastboot command as simple as fastboot flash, then you should stay clear of s-off...
but that's my opinion.
and I'm really not saying this to be an ass.
just don't want to see you brick your phone.
Click to expand...
Click to collapse
None taking but if I don't know whats wrong how am I gonna search? Instead of telling me about the search button which yields thousands of threads how about helping me out. As you can see I have been a member for a long time. I didn't just pop on this site because I screwed up. I was up till 4 am trying to figure this out before asking for help.

I think I bricked my wifi flyer

I was unlocking the bootloader and at the last step my little son unplugged it.
So now when I power it on i see HTC logo for couple of second and then black screen.
Holding power +vol down takes my to hboot, but I am a total noob how to fix it.
BTW it sais unlocked and s -on
It is a best buy wifi only version
ADB doesnt recognize my flyer actually my computer doesn't recognize it at all
Any help please????
A little more info from holding power+vol down:
Unlocked
FLYER PVT SHIP S-ON RL
HBOOT-1.11.0011
MICROP-0950
RADIO-3822.10.08.07_M
eMMC-boot
Oct 25 2011, 16:55
Two threads in different sections?
You are not bricked. What were you looking to accomplish
Flyer
I was unlocking a friend's bootloader the other day via HTCDev for another phone. I unplugged during the process as well however this didn't affect it. Your bootloader is telling you that you're also unlocked. How long have you waited on the black screen after the HTC logo?
If you hold power and volume down to enter the bootloader then go into fastboot mode, can you connect the Flyer to your PC and enter the following command into a terminal;
Code:
fastboot devices
A serial number will come up if your Flyer is being recognised. If this is the case it would be possible for you to flash a custom recovery enabling you to then flash a custom rom.
What he said
Flyer
pravus_nephilim said:
I was unlocking a friend's bootloader the other day via HTCDev for another phone. I unplugged during the process as well however this didn't affect it. Your bootloader is telling you that you're also unlocked. How long have you waited on the black screen after the HTC logo?
If you hold power and volume down to enter the bootloader then go into fastboot mode, can you connect the Flyer to your PC and enter the following command into a terminal;
Code:
fastboot devices
A serial number will come up if your Flyer is being recognised. If this is the case it would be possible for you to flash a custom recovery enabling you to then flash a custom rom.
Click to expand...
Click to collapse
Nothing happens
It doesnt show anything
mcord11758 said:
Two threads in different sections?
You are not bricked. What were you looking to accomplish
Flyer
Click to expand...
Click to collapse
I just want my flyer back
pravus_nephilim said:
I was unlocking a friend's bootloader the other day via HTCDev for another phone. I unplugged during the process as well however this didn't affect it. Your bootloader is telling you that you're also unlocked. How long have you waited on the black screen after the HTC logo?
If you hold power and volume down to enter the bootloader then go into fastboot mode, can you connect the Flyer to your PC and enter the following command into a terminal;
Code:
fastboot devices
A serial number will come up if your Flyer is being recognised. If this is the case it would be possible for you to flash a custom recovery enabling you to then flash a custom rom.
Click to expand...
Click to collapse
Sorry actually I get this:
HT15SJN00622 fastboot
I would think, as mentioned, your best route is to flash a recovery then a rom. Has to be a rom with a stock kernel so I suggest either virtuous or iodriod. Assuming your on hc which I believe is the case. Download a rom to your pc then download this and place it in the same directory as your Fastboot commands
https://m.box.com/view_shared/9bb9ba944ea6f301afe8
Then with flyer in Fastboot and connected
Fastboot flash recovery "name of file here"
Then go back to hboot and select recovery should now have it. Under options in recovery mount to pc and place rom you downloaded on your external sd. Then go back and select install zip from sd find the rom and flash it
mcord11758 said:
I would think, as mentioned, your best route is to flash a recovery then a rom. Has to be a rom with a stock kernel so I suggest either virtuous or iodriod. Assuming your on hc which I believe is the case. Download a rom to your pc then download this and place it in the same directory as your Fastboot commands
https://m.box.com/view_shared/9bb9ba944ea6f301afe8
Then with flyer in Fastboot and connected
Fastboot flash recovery "name of file here"
Then go back to hboot and select recovery should now have it. Under options in recovery mount to pc and place rom you downloaded on your external sd. Then go back and select install zip from sd find the rom and flash it
Click to expand...
Click to collapse
Yes I was on HC
Sorry for noob question
How do I flash recovery??
Is this Rom ok?
RUU_Flyer_BrightstarUS_WWE_1.36.1540.32_R_Radio_20.3501.30.089BU_3809.05.04.10_M_release_191425_signed
Why were you unlocking your flyer, what is your end goal?
Flyer
mcord11758 said:
Why were you unlocking your flyer, what is your end goal?
Flyer
Click to expand...
Click to collapse
I wanted to go back to gingerbread
but now i regret it
question:
by putting those two files to the same directory can I put them in my folder adb with adb.exe, fastboot.exe ?
I have a problem with this, I am not sure ..
So you have a best buy flyer and wanted to roll back to gb. Your hboot says unlocked and you have not yet flashed a recovery. First thing I want to do is get you booted then if you still have the stomach you can go back to gingerbread.
If you have not already, download the recovery.img I linked. Place it in the same folder as the Fastboot.exe. Put your flyer in Fastboot mode.
Open a command prompt on your pc. Change to the directory that has your adb/Fastboot commands. Type
Fastboot flash recovery "name of downloaded recovery file.img"
No quotations just file name then hit enter
Should flash recovery. Download a hc rom to your pc, I suggest iodriod which is a smaller file. Then place it on ext sd and flash like you would any rom.
mcord11758 said:
So you have a best buy flyer and wanted to roll back to gb. Your hboot says unlocked and you have not yet flashed a recovery. First thing I want to do is get you booted then if you still have the stomach you can go back to gingerbread.
If you have not already, download the recovery.img I linked. Place it in the same folder as the Fastboot.exe. Put your flyer in Fastboot mode.
Open a command prompt on your pc. Change to the directory that has your adb/Fastboot commands. Type
Fastboot flash recovery "name of downloaded recovery file.img"
No quotations just file name then hit enter
Should flash recovery. Download a hc rom to your pc, I suggest iodriod which is a smaller file. Then place it on ext sd and flash like you would any rom.
Click to expand...
Click to collapse
when I do that (if I put the file name correctly) I get this:
error cannot load hc recovery
The file name was hc recovery right?
Btw I want to thank you for hepling me.
Also I do not have the stomach to downgrade anymore, I just want my flyer to work again
Did you put the .img at the end of the name?
maciejkoziol said:
when I do that (if I put the file name correctly) I get this:
error cannot load hc recovery
The file name was hc recovery right?
Btw I want to thank you for hepling me.
Also I do not have the stomach to downgrade anymore, I just want my flyer to work again
Click to expand...
Click to collapse
I am trying to locate the rom you suggeted but I cannot find it.
Btw breathe a little I do not believe you are that bad off, correcting your issue should not be that hard
---------- Post added at 09:46 AM ---------- Previous post was at 09:45 AM ----------
Rom
http://forum.xda-developers.com/showthread.php?t=1580395
mcord11758 said:
Did you put the .img at the end of the name?
Click to expand...
Click to collapse
I typed fastboot flash recovery hc recovery.img
got error cannot load hc
Can you confirm that you flyer is in Fastboot and that the recovery is in the same folder as your adb files and that you are in that directory in your command prompt
mcord11758 said:
Can you confirm that you flyer is in Fastboot and that the recovery is in the same folder as your adb files and that you are in that directory in your command prompt
Click to expand...
Click to collapse
yes all should be correct
Remove any space in file name. So just hcrecovery.img

relocking rezound

Trying to re-lock my Rezound using fastboot. When I dbl click fastboot on PC, a black cmd window briefly flashes then disappears. help?
fastboot is a command line app. Open a command window and type "fastboot oem lock"
that's what i tried first, then got a "waiting for device" message. I figured i didn't have my phone set right? here was my process...
1. rebooted phone to hboot
2. connected to computer
3. opened command window
4. cd to the correct directory
5. typed the "fastboot oem lock" command
6. received "waiting for device" message
???
novakrj said:
that's what i tried first, then got a "waiting for device" message. I figured i didn't have my phone set right? here was my process...
1. rebooted phone to hboot
2. connected to computer
3. opened command window
4. cd to the correct directory
5. typed the "fastboot oem lock" command
6. received "waiting for device" message
???
Click to expand...
Click to collapse
Make sure you go into fastboot once you're in the HBoot menu or it won't be able to communicate with the device
Make sure you have HTC Sync or some other Rezound-compatible drivers installed. It needs that for fastboot and adb to communicate with your phone.
dplane said:
Make sure you go into fastboot once you're in the HBoot menu or it won't be able to communicate with the device
Click to expand...
Click to collapse
You have to be I fast boot, hboot
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
Same thing happened to me. Make sure when you plug in the usb cable, the phone connects as a disk drive, not charge only.
Are you trying to re lock or go S-on? I thought that flashing the command fastboot OEM lock would put S-on rather than relock.
Sent from my ADR6425LVW using Tapatalk 2
ended up i needed both bits of advice.
I hadn't reinstalled htc sync files since a pc reformat a month ago, and i needed to enter fastboot once in hboot.
thanks guys
Mr. Boom said:
Are you trying to re lock or go S-on? I thought that flashing the command fastboot OEM lock would put S-on rather than relock.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
no.
fastboot oem lock is changing hboot to relocked
s-on command is something like fastboot write secureflag3 or something- look it up don't use what i just posted. if you do go s-on make sure you just ran a RUU
Mr. Boom said:
Are you trying to re lock or go S-on? I thought that flashing the command fastboot OEM lock would put S-on rather than relock.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
"Fastboot OEM lock" is to lock the bootloader.
"Fastboot OEM writesecureflag3" is to go back to s-on
Sent from my Galaxy Nexus
1. Reboot to fastboot.
This can be done in 3 ways:
A. from the power menu (assuming the rom has it
B. Shut down completely. Battery pull to make sure. Then hold press amd hold Vol Down, then press and hold Power and keep holding down both.
C. Use the command:
adb reboot bootloader
2. Use fastboot to relock bootloader.
Sent from my Rezound
since last we spoke...
was able to relock
flashed the ruu to get back to stock
updated OTA to ICS
unlocked again
flashed aman ra in fastboot
rebooted
the plot thickens...
when i reboot to recovery, it reboots to android stock, not aman ra, hence, no root?
thoughts?
novakrj said:
since last we spoke...
was able to relock
flashed the ruu to get back to stock
updated OTA to ICS
unlocked again
flashed aman ra in fastboot
rebooted
the plot thickens...
when i reboot to recovery, it reboots to android stock, not aman ra, hence, no root?
thoughts?
Click to expand...
Click to collapse
just try flashing Amon Ra again
should i wipe anything first?
novakrj said:
should i wipe anything first?
Click to expand...
Click to collapse
No, just fastboot flash.
Sent from my Rezound
still no go on second flash attempt. still showing android system recovery, not aman ra. tried to install su superuser in the developer menu in android system recovery to achieve root but didn't take.
thanks if anybody has any ideas. I'll just keep searching threads...i usually miss something pretty obvious.
edit: just in case this helps...
when i boot into recovery the top of the screen reads "Android system recovery"
at the bottom of the screen it says:
RA Revamped
Build: RA VIGOR-v3.15-getitnowmarketing
novakrj said:
still no go on second flash attempt. still showing android system recovery, not aman ra. tried to install su superuser in the developer menu in android system recovery to achieve root but didn't take.
thanks if anybody has any ideas. I'll just keep searching threads...i usually miss something pretty obvious.
edit: just in case this helps...
when i boot into recovery the top of the screen reads "Android system recovery"
at the bottom of the screen it says:
RA Revamped
Build: RA VIGOR-v3.15-getitnowmarketing
Click to expand...
Click to collapse
Yeah that's amon ra.
Now flash the SuperSu zip file.
(the install su doesnt work last time I checked.)
You can get the SuperSu zip in Ashton's ICS thread.
Sent from my Rezound
beautiful....Thank you!

Stuck at 4G LTE screen after zip update

I was on 4.0.3 and I flashed the zip through AromRa recovery.
Now, when booting up, its stuck at the 4G screen.
The update was the OTA update released to update radios to Global. THIS
It didn't gave any error at all, it said "Reboot to complete installation or update". But when I clicked the reboot option, I saw a line saying something like "Can't write....." then the screen went off and it rebooted. This line was not there, or atleast not visible before I clicked the reboot option.
I am new to rezound and android, so please let me know what I can do. I wasn't able to get a nandroid backup before doing this, had no ext. SD card.
All I did before flashing the zip was flashing the custom recovery. Nothing else. No SU or anything else.
Can I RUU 4.0.3 to fix this problem?
Yes you need to ruu to get it back. I'm assuming your s on. You need to be s off in order to flash radios by themselves.
Sent from my ADR6425LVW using xda app-developers app
Yes, I am s-on and not rooted.
Is there any specific RUU that I should go to? I was thinking of using 4.03.605.2
Thanks
lamborg said:
Yes, I am s-on and not rooted.
Is there any specific RUU that I should go to? I was thinking of using 4.03.605.2
Thanks
Click to expand...
Click to collapse
Yes, that's the latest global RUU.
You need to relock to run it:
fastboot oem lock
Put it on your sd card and it should do it's thing when you reboot. Run it a couple times and make sure it's finished so it will get all the system files. I believe it reboots you once it's done.
Then you can unlock again, flash recovery and root. If you have trouble rooting again search this forum for "super su" and you'll find a version you can flash to gain root.
feralicious said:
Yes, that's the latest global RUU.
You need to relock to run it:
fastboot oem lock
Put it on your sd card and it should do it's thing when you reboot. Run it a couple times and make sure it's finished so it will get all the system files. I believe it reboots you once it's done.
Then you can unlock again, flash recovery and root. If you have trouble rooting again search this forum for "super su" and you'll find a version you can flash to gain root.
Click to expand...
Click to collapse
I relocked but then tried flashing the zip twice.
Here's what comes in cmd:
sending....
OKAY
writing
<bootloader>adopting sig ....
<bootloader>checking sig
failed <remote: not allowed>
finished
After rebooting, it gets stuck on the white HTC screen.
sounds like a bad download, go back to android police and try to get the mirror from Illinois, it worked for me a couple of weeks ago after having the same issue as you.
sent from my rooted SAMSUNG GALAXY NOTE 2...
mike7728 said:
sounds like a bad download, go back to android police and try to get the mirror from Illinois, it worked for me a couple of weeks ago after having the same issue as you.
sent from my rooted SAMSUNG GALAXY NOTE 2...
Click to expand...
Click to collapse
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
lamborg said:
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
Click to expand...
Click to collapse
You have to fastboot oem rebootRUU first
then fastboot flash zip PH98IMG.zip
you may have to flash the zip twice.
Code:
androidforums.com/incredible-all-things-root/487280-easier-way-flash-pb31img-files.html
(I can't link yet)
lamborg said:
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
Click to expand...
Click to collapse
You don't flash this in fastboot since it's a zip file.
EDIT: Looks like you can flash in fastboot as mentioned in the above post. Cool, I like that. I would flash it twice as I've read several times that you need to to make sure it gets all the system files.
If htat doesn't work for whatever reason, just put it on the sd card of your phone, detach your phone from your pc and reboot. hboot should find it (it looks for the PH98IMG.zip file) and flash it. Flash it twice to be sure it gets all the system files.
When it's done and you're rebooted use a file explorer and delete the PH98IMG file so it doesn't flash again on the next reboot.

Categories

Resources