Somebody Please help me My motorola photon is not working . On 12/Jul/2012 I got Official update from motorola. But afeter the phone update It showing "Failed to Boot 4 " error and followed by "Starting RSD mode".... I'm totally helpless at this situation,.
One day i kept the mobile with the same error ( i thought it will boot) but finally i got one more message that is "Battery is too low to flash" along with that two messages....
Somebody please help me to recover my phone with this Pls :crying:
ganeshshas said:
Somebody Please help me My motorola photon is not working . On 12/Jul/2012 I got Official update from motorola. But afeter the phone update It showing "Failed to Boot 4 " error and followed by "Starting RSD mode".... I'm totally helpless at this situation,.
One day i kept the mobile with the same error ( i thought it will boot) but finally i got one more message that is "Battery is too low to flash" along with that two messages....
Somebody please help me to recover my phone with this Pls :crying:
Click to expand...
Click to collapse
Try the instruction lopezj760 gave
http://forum.xda-developers.com/showthread.php?t=1640940&page=2
Scroll down a bit. But you'll have to somehow find an external charger to charge up your battery first though. Good luck.
But don't flash any sbf in the phone!!
Motophoton
peetr_ said:
But don't flash any sbf in the phone!!
Click to expand...
Click to collapse
Hi,
now i am going to find some extenal charger to charge up my battery..
Anyhow after charging what to do next ? can any one help !
First, you must understand the problem. So next you must read. There is no how to yet. Read whole "How to make custom sbf" and "Sbf flashing experience" dev thread to try some possibilities, or go for warranty replacement.
There was probably error when applying patches with OTA, because of root or deleted app, or something like that.
Related
I went to upgrade my p500 using KDZ updater and now it's DEAD
On my first update it gives me and error
second try same
third try didn't change a thing
and now it's dead
I can't make my phone boot
It is lifeless
Even when charging nothing shows up... T^T Help please...
Go service center...get motherboard replaced..
Wolfexon said:
I went to upgrade my p500 using KDZ updater and now it's DEAD
On my first update it gives me and error
second try same
third try didn't change a thing
and now it's dead
I can't make my phone boot
It is lifeless
Even when charging nothing shows up... T^T Help please...
Click to expand...
Click to collapse
read the downgrading steps and take proper precaution like battrey chargee, and drivers http://forum.xda-developers.com/showthread.php?t=1038338 follow error guide for reviving ur phone in the way he describes http://forum.xda-developers.com/showthread.php?t=883314
Wolfexon said:
I can't make my phone boot
It is lifeless
Even when charging nothing shows up... T^T Help please...
Click to expand...
Click to collapse
Is it powering on? Does it show any sign of life?
Well.....I just sent it back to the factory
Guess I have to survive without it for a few weeks....or days hopefully
Motorola Atrix 4G At&t show error"SVF:105.1:2 Failed to boot 0X1000"
whn i try to downgrade to v2.3 to v2.2.2 after flashing show this message
how can i solve it pls any 1 give me the solution
post it here
There is no fix. You are hard-bricked.
Sent from my MB860 using XDA App
Pull the battery and try:
Press and hold vol down while you turn on your phone until "fastboot" tag show up in your screen the release vol down and press vol up once to enter to fastboot
Check if it work?
bivrat said:
Motorola Atrix 4G At&t show error"SVF:105.1:2 Failed to boot 0X1000"
whn i try to downgrade to v2.3.4 to v2.2.2 after flashing show this message
how can i solve it pls any 1 give me the solution
post it here
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
thr is no option like this............
just show this error and shut off the phone.............
SVF:105.1:2 Failed to boot 0X1000
any other solution...............'
How it happened? After flashing a SBF by RSD? Did you were bootloader unlocked before?
Sent from my MB860 using XDA App
There is no fix. You are hard Bricked.
Insurance will cover, AT&T store MIGHT if you say it happened when installing gingerbread update I guess.
The reason I was asking was due to the2dcour stated:
the2dcour said:
yes but you will get 0x1000 error. Don't freak out, it will let you boot in to fasboot and unlock. In fact, if you boot directly into fastboot after flash you wont even seen the 0x1000 probably. This has worked for multiple people that flashed 2.3.4 official sbf or official OTA 2.3.4 . As always, not guaranteeing anything for your specific phone.
Click to expand...
Click to collapse
BUT THAT APPLIED FOR A SPECIFIC PROCEDURE AFTER FLASHING BY RSD 2.3.4 WITH PUDDING SBF
IF YOU FLASHED A MOTO SBF WITHOUT PUDDING AFTER BEEN "UNLOCKED" SO THEN YES IS A HARD BRICK
Sent from my MB860 using XDA App
mramirezusa said:
The reason I was asking was due to the2dcour stated:
BUT THAT APPLIED FOR A SPECIFIC PROCEDURE AFTER FLASHING BY RSD 2.3.4 WITH PUDDING SBF
IF YOU FLASHED A MOTO SBF WITHOUT PUDDING AFTER BEEN "UNLOCKED" SO THEN YES IS A HARD BRICK
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Well, there are enough warnings which say not to downgrade from 2.3.4. Except the SBF with Pudding. And if you ignore those warnings, that's what you get.
Sorry dude, it is your own fault. Phone is bricked....
whn i try to flashing .sbf using rsd mode thn it happen to me.............. so how can i solved by own............... i dnt unlocked it by bootloader
so thr no solution to recover my phone.............
bivrat said:
whn i try to flashing .sbf using rsd mode thn it happen to me.............. so how can i solved by own............... i dnt unlocked it by bootloader
so thr no solution to recover my phone.............
Click to expand...
Click to collapse
Nope. No fix. Sorry
so now wht can i do............ can i claim to motorola warranty...... they can solved it............. or no 1 can solved it...........
The warranty "should' cover it.
But like everyone already said there are multiple warnings not to downgrade once using the official 2.3.4 update for this very reason. If I recall correctly it even said so in the text message I received that informed me of the update.
My Atrix has the same situation, someone find a solution?
There is no solution for a hard brick.
Sent from my MB860 using XDA App
pls chk this link hope ur prob will solved http://forum.xda-developers.com/showthread.php?t=1182871
motorola atrix mb860 now a paper waight
phone was already rooted using gingerbreak. attempted update through settings and it would download but fail to install.
i had install cwm, everything was fine.
but think i tried a update file, that gave me the failed to boot 2 with motorola logo.
well was spending endless time on forums trying to understand what, mistake i did.
and tried the rsd lite and using preinstall rsd lite file. then got the failed to boot 0x1000 no os detected. with 14 options, and nothing seem to work.
no file would work. batter wont charge even tryed to hard charge cutting charger and going strait to battery ...
IF ANYONE KNOWS A FIX.. please inform me.
I didnt have this much a hard time with my htc vivid ...
IF THERE IS NO FIX , I WILL HAVE FUN SMASHING THE THING ..
anyways .
thankx for your time, hope to hear something good..
celticpayne said:
phone was already rooted using gingerbreak. attempted update through settings and it would download but fail to install.
i had install cwm, everything was fine.
but think i tried a update file, that gave me the failed to boot 2 with motorola logo.
well was spending endless time on forums trying to understand what, mistake i did.
and tried the rsd lite and using preinstall rsd lite file. then got the failed to boot 0x1000 no os detected. with 14 options, and nothing seem to work.
no file would work. batter wont charge even tryed to hard charge cutting charger and going strait to battery ...
IF ANYONE KNOWS A FIX.. please inform me.
I didnt have this much a hard time with my htc vivid ...
IF THERE IS NO FIX , I WILL HAVE FUN SMASHING THE THING ..
anyways .
thankx for your time, hope to hear something good..
Click to expand...
Click to collapse
You have a soft brick and can recover. I don't have time to find the links for you right now, but search for soft brick solutions.
You have a very common error with a common solution.
http://youtu.be/QiZdY9rw-uo
celticpayne said:
phone was already rooted using gingerbreak. attempted update through settings and it would download but fail to install.
i had install cwm, everything was fine.
but think i tried a update file, that gave me the failed to boot 2 with motorola logo.
well was spending endless time on forums trying to understand what, mistake i did.
and tried the rsd lite and using preinstall rsd lite file. then got the failed to boot 0x1000 no os detected. with 14 options, and nothing seem to work.
no file would work. batter wont charge even tryed to hard charge cutting charger and going strait to battery ...
IF ANYONE KNOWS A FIX.. please inform me.
I didnt have this much a hard time with my htc vivid ...
IF THERE IS NO FIX , I WILL HAVE FUN SMASHING THE THING ..
anyways .
thankx for your time, hope to hear something good..
Click to expand...
Click to collapse
Where you in the process of unlocking your bootloader?
how unbrick the hard bricked Atrix 4g. (svf 105:1:2 failed to boot 0x1000 entering nv
bivrat said:
Motorola Atrix 4G At&t show error"SVF:105.1:2 Failed to boot 0X1000"
whn i try to downgrade to v2.3 to v2.2.2 after flashing show this message
how can i solve it pls any 1 give me the solution
post it here
Click to expand...
Click to collapse
I got security boot key for my atrix 4g and used nvflash to encrypt it and now i got my hard bricked atrix back as it was before hard bricking. Process is too easy but nobody knows here on this site. if anyone want to unbrick the hard bricked atrix 4g then please contact me on. Cheers Motorola AT&T
Hi Guys,
I'm guessing that there's nothing that can be done but last hope!
Last night i was trying to update my Gf's Optimus One with little success using KDZ, got to the point where it wouldnt boot, so flashed the original ROM back to it, during the process after a few minutes it gave an error code and the Flash was unsuccessful. Thought' id' reboot the phone into Emergency and try the flash again - it errored pretty much straight away - Pulled battery from phone - reinserted it and now nothing!
The phone will not respond to power on, USB insert, etc Just completely dead..
Im guessing i know the answer already - but is there anything that can bring this back from the dead.... Seriously in the Doghouse!
Cheers
Paul
This is Dev section , please post in general section !!
Sent from my LG-P500
Sorry - Can a mod please move this to the correct place.
Don't u have warranty???
Sent from my LG-P500 using Tapatalk
I bricked my phone the same way.
I was trying to flash the original russian Gingerbread with LGMDP and there was a cable connection problem... I chose to erase all data before flashing (EFS Erase ALL). If only mobile devices had BIOS...
No hope, unfortunately. You have to connect your chipset to a computer and manually write all data... Or send to LG Service Center. Just hope they'll fix it for free... (They can't detect how you wiped device's boot loader if all the flash memory is empty)
paulrgod said:
Hi Guys,
I'm guessing that there's nothing that can be done but last hope!
Last night i was trying to update my Gf's Optimus One with little success using KDZ, got to the point where it wouldnt boot, so flashed the original ROM back to it, during the process after a few minutes it gave an error code and the Flash was unsuccessful. Thought' id' reboot the phone into Emergency and try the flash again - it errored pretty much straight away - Pulled battery from phone - reinserted it and now nothing!
The phone will not respond to power on, USB insert, etc Just completely dead..
Im guessing i know the answer already - but is there anything that can bring this back from the dead.... Seriously in the Doghouse!
Cheers
Paul
Click to expand...
Click to collapse
read downgrading details along with error thread it will definately come back to life http://forum.xda-developers.com/showthread.php?t=1038338
http://forum.xda-developers.com/showthread.php?t=883314
shhbz said:
read downgrading details along with error thread it will definately come back to life http://forum.xda-developers.com/showthread.php?t=1038338
http://forum.xda-developers.com/showthread.php?t=883314
Click to expand...
Click to collapse
Thanks for the links - i was working my way through the second one at 3am this morning.. Yes - i've even tried Shaking it
The P500 community has produced some wonderful guides and looking at it seems like the device is almost impossible to Brick completely, just how this happened i havn't a clue, seems ive managed the almost impossible..
I'd more than likely be able to ressurect it if it responded to anything at all - but no power, and nothing when the USB is inserted, no vibration, no lights, no signs of life...
the phone may be under warranty, but ive got to dig out the reciept - and i cant even begin to think where that is..
Well anyway i've had to buy her a replacement today - ended up with a Samsung Galaxy Mini as they dont stock the Optimus one anymore. Closest thing i could find.
Cheers for the help guys - i guess next effort will be warranty repair.
dude pls try uninstallin all the lg drivers usb etc etc and then try it again...it happend to me but ive still managed to ressurect it so try this and after send it to warranty
From last week, my motorola razr get hot every time i turn it on and then after few minutes it get too hot and restarts automatically and then get hot and restarts. It's always like that. Can anyone help me ?
have you looked to see if some rogue app is running at 100% processor? I'd first try a factory reset and see if the problem goes away before installing any apps.
I already did a factory reset but it still gets hot. Actually , there was an update to do last week, i downloaded the update and installed it but the instalation failed and this problem appeared after that.
"my motorola razr get hot every time i turn it on"
a start of a love story.
ExtraDan said:
"my motorola razr get hot every time i turn it on"
a start of a love story.
Click to expand...
Click to collapse
lol,, i'm starting to hate my razr instead
any solutions to resolve this problem ?
I already did a factory reset but it still gets hot. Actually , there was an update to do last week, i downloaded the update and installed it but the instalation failed and this problem appeared after that.
Click to expand...
Click to collapse
Perhaps you should try to flash the firmware again via this tool: "RSD Lite".
Also you should download the right firmware and flash it with RSD Lite.
(Can be found here in the forum)
If this isn't solving your problem, you should contact MOTO...
Bring it back and get a new one. Problem solved.
When you post a thread like this you should give us as much information as possible.
Also have you flashed using rsd?
Ask us any Android Related Questions @FeraLabsDevs on Twitter (Even If You've Bricked)
Hello people. Okay so i got my phone in August, two months later i received an update from Android 2.3.6 to 4.0.3... all went good during the update. A month ( or so ) later, the phone freezes and had to take out the battery to get it to work again, just that after rebooting the phones time and date indicated something like 4:20 AM 13.03.1986 and no network service !!!! Went to a friend of mine to solve this problem, and if i remember correctly he changed the Rom from 934 to 936 ( or something like that ) and the phone was working again. All good till this morning when i found the phone powered off. Had to pull out the battery to turn it on again, just that it won't boot any more, just freezes on the Huawei logo, and every now and then i get this messages :
E: failed to mount /cache ( invalid argument )
E: can't mount /cache / recovery / comand
E: can't mount data /fota/ ipth-muc.prop.
After these messages, the phone just reboots on and on and on .... till the battery runs out. Any ideas about what happened and what could i do to fix it ?
Thank you for the help
Okay, so no one knows how can i fix this problem ?
havrelesina andrei said:
Hello people. Okay so i got my phone in August, two months later i received an update from Android 2.3.6 to 4.0.3... all went good during the update. A month ( or so ) later, the phone freezes and had to take out the battery to get it to work again, just that after rebooting the phones time and date indicated something like 4:20 AM 13.03.1986 and no network service !!!! Went to a friend of mine to solve this problem, and if i remember correctly he changed the Rom from 934 to 936 ( or something like that ) and the phone was working again. All good till this morning when i found the phone powered off. Had to pull out the battery to turn it on again, just that it won't boot any more, just freezes on the Huawei logo, and every now and then i get this messages :
E: failed to mount /cache ( invalid argument )
E: can't mount /cache / recovery / comand
E: can't mount data /fota/ ipth-muc.prop.
After these messages, the phone just reboots on and on and on .... till the battery runs out. Any ideas about what happened and what could i do to fix it ?
Thank you for the help
Click to expand...
Click to collapse
i have the same problem that you. Do you found the solution for this? thanks
Hello
sara93 said:
i have the same problem that you. Do you found the solution for this? thanks
Click to expand...
Click to collapse
No, unfortunately i didn't. I think that it is a memory problem and haven't managed to find a way to fix it. I have started a thread on Modaco forum with the same name and there you'll find all the things i've tried. Have a go with that, maybe you'll get lucky. If you figure out something please let me know. Thanks
Ps : Can't post links in here because i'm new ... but if you search on modaco " Boot problems on Huawei Ascend G300 ( U8815 ) " you'll find my thread
havrelesina andrei said:
No, unfortunately i didn't. I think that it is a memory problem and haven't managed to find a way to fix it. I have started a thread on Modaco forum with the same name and there you'll find all the things i've tried. Have a go with that, maybe you'll get lucky. If you figure out something please let me know. Thanks
Ps : Can't post links in here because i'm new ... but if you search on modaco " Boot problems on Huawei Ascend G300 ( U8815 ) " you'll find my thread
Click to expand...
Click to collapse
I read this post too and I looked on twitter to see if you answer me if you had fixed. Right now I've taken today to the store because mobile is under warranty and see if I get lucky and solve it beacuse I installed the official ICS version. A friend told me that maybe flashing the phone can be fixed.
Thanks
sara93 said:
I read this post too and I looked on twitter to see if you answer me if you had fixed. Right now I've taken today to the store because mobile is under warranty and see if I get lucky and solve it beacuse I installed the official ICS version. A friend told me that maybe flashing the phone can be fixed.
Thanks
Click to expand...
Click to collapse
The " good " part with mine, is that i have warranty too. Just that the warranty is valid in a country 1200 km away ::laugh:
Woke up this morning and my G300 is doing the exact same thing. Gutted.
djstevie said:
Woke up this morning and my G300 is doing the exact same thing. Gutted.
Click to expand...
Click to collapse
If you have warranty i suggest to leave it up to them. On mine they changed the motherboard.
Ended up sending it away for repair under warranty. Just waiting on it coming back now. From what i've been reading elsewhere it seems that its the ICS release that can cause these issues. If it comes back on Gingerbread i might just leave it on that.
djstevie said:
Ended up sending it away for repair under warranty. Just waiting on it coming back now. From what i've been reading elsewhere it seems that its the ICS release that can cause these issues. If it comes back on Gingerbread i might just leave it on that.
Click to expand...
Click to collapse
I said i will leave Gingerbread on too, but i had to make the update to ICS again because the volume problem.
Got i back a few days ago. They replaced the mainboard. My IMEI changed and the phone was network locked again with Vodafone ICS on it.
I too have this problem... and no any warrenty.
what can I do.