[HowTo/CommDownld/UPE]★(¯ `•.Update your Windows Phone ® 7 on Tsunagi.•´¯)★[Method#3]
This is a small tutorial, how to update first release Windows Phone ® 7. All info you find in this site.
Step #1
We search program Common Downloader version: 4.7.20 in internet, or … .
Next Install this program in your PC/Laptop.
…in this moment, give to you small package, where is WP7 image and other files.
Extract this package, maiby in example for “windowsphone” folder…..
Step #2
In Tsunagi device you run -> Factory Mode (turn off your phone, and press: up, and down volume + press power button, at one time), Must display a sign on the screen: Factory Mode, etc.
Now you run Common Downloader from directory ZTEiT\Common downloader (find this in Program Files, or in Start Menu)
Go to tab “Multi-Download”…. click “Reflesh”, if you phone not display, in me phone have a port: COM6.
Step #3
In “Multi-Image” tab
In location click “Browse”, and select your folder “windowsphone”
Next click “Advanced”, then you see new windows, and select files:
NPRG8650.hex
partition.mbn
dbl.mbn
fsbl.mbn
osbl.mbn
amss.mbn
apps.mbn – this file you must uncheck
appsboot.mbn
flash.bin
dsp1.mbn
Info: The rest of the files must be unchecked. The order of the files is the order of the program.
Now click “OK”, then press “Start” in line, on COM6.. and waiting for end process.. phone restart, and he run Windows Phone.
Everything you do at your own risk. Do not assume, responsibility for any damage.
Download Common Downloader:
...in attach...
Copyright (c) 2010-2011 UPE Production by Nokser
All Right Reserved.
Where I can download all windows phone files?
bahni said:
Where I can download all windows phone files?
Click to expand...
Click to collapse
It's this same files in all topic...
Thanks to the informative post @ http://forum.xda-developers.com/showthread.php?t=1371345. However, I am still unable to use internet on my Android Huawie u8150.
I'm using LAN connection (with proxy settings) on my office PC having windows 7 installed.
I would really appreciate if someone enlighten and fix the problem.
Here are the logs for perusal and ready referance:
Android Service
CheckConnection : send done 2
UdpRelay : waiting on port 42004
UdpRelay : socket 42004 failed.
UdpRelay : waiting on port 42005
UdpRelay (42004) : Thread stopped
Windows client
Connecting to device. This may take a few seconds
Step 1 : Check if a device is connected
Ok
Step 2 : Checking android package
Installed package version : 3.16
Current package version : 3.16
Ok
Step 3 : Check if usb port is available
Ok
Step 5 : Start android service
Ok
Step 6 : Ensure connection is closed before open it
Ok
Step 7 : Connect to android
Ok
Step 8 : Check android connection
Waiting for response...
Check connection 1 ok
Check connection 2 ok
Step 9 : Send init to android service
Ok
Step 10 : Send scripts
Ok
Step 11 : Start script1
Ok
Step 12 : Send port forwarding
Ok
Connection is done
Step 9 : Send init to android service
Ok
Step 10 : Send scripts
Ok
Step 11 : Start script1
Ok
Step 12 : Send port forwarding
Ok
Connection is done
Thanks for help
Hello guys!
So I have the Samsung Galaxy Trend GT-S7560 phone stuck on bootloop after replacing broken touchscreen digitizer (and yes, I triple-checked the all the connectors).
I can get into the 'download mode' which is nice. So I tried to reflash the kernel and although I compiled the zImage, I've no idea what to do with it further. Extra details and motivation follows...
I've seen some vague claims on the Web that flashing GT-S7562 firmware on GT-S7560 fixes this (but may introduce different bugs), and I tried to investigate this further.
I fetched the source code from opensource.samsung.com for both GT-S7560 and GT-S7562.
I assumed this might be different drivers for touchscreens in kernel configuration, but there is insignificant change in configurations.
Code:
$ diff -u kernel-S756{0,2}/arch/arm/configs/kyle02_defconfig
--- kernel-S7560/arch/arm/configs/kyle02_defconfig 2013-05-29 05:14:53.000000000 +0300
+++ kernel-S7562/arch/arm/configs/kyle02_defconfig 2012-10-19 03:06:01.000000000 +0300
@@ -217,7 +217,6 @@
CONFIG_SENSORS_BMA222=y
CONFIG_SENSORS_BMA222E=y
CONFIG_SENSORS_CORE=y
-CONFIG_SENSORS_KXTJ2=y
CONFIG_PROXIMITY_SENSOR=y
CONFIG_ANDROID_PMEM=y
CONFIG_SCSI=y
@@ -245,7 +244,6 @@
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_MELFAS_KYLE=y
-CONFIG_TOUCHSCREEN_MELFAS_KYLE_G2=y
# CONFIG_TOUCHSCREEN_ZINITIX_AMAZING is not set
CONFIG_TOUCHSCREEN_ATMEL_MAXTOUCH=n
CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C=n
Although there is some difference in code, but I haven't spotted the relevant parts yet.
Since the source I have is most likely newer (tagged S7560XXBMK2), I thought I could try to flash it unmodified and hope it contains the fix already. I compiled the zImage but I wonder what do I do with it now.
I got a partition dump from phone with Heimdall (Linux equivalent of Odin), but none says 'KERNEL' (as I expected it would).
Code:
$ heimdall print-pit | sed -nE '/^---/{N;N;N;N;N;N;N;N;N;N;N;s/^--- Entry #([0-9]+).*Partition Name: ([^\n]*).*Flash Filename: ([^\n]*)/\1: \2 \(\3\)/p}'
0: CFG_DATA (qcsblhd_cfgdata.mbn)
1: QCSBL (qcsbl.mbn)
2: FAT (fat.bin)
3: EBR_START (partition.bin)
4: OEMSBL (oemsbl)
5: APPSBL (appsbl)
6: SSD ()
7: APPS (boot.img)
8: MODEM_ST1 ()
9: MODEM_ST2 ()
10: PERSIST (persist.img.ext4)
11: RECOVERY (recovery.img)
12: PARAMETER (parameter.img)
13: SECURE ()
14: PIT (pit.bin)
15: SYSTEM (system.img.ext4)
16: CACHE (cache.img.ext4)
17: MD5 (md5.img)
18: EFS (efs.img.ext4)
19: IMG_BACKUP ()
20: MISC ()
21: HIDDEN (hidden.img.ext4)
22: UMS ()
23: MODEM_BKP ()
24: USERDATA (userdata.img.ext4)
25: MBR (mbr.img)
26: EBR (ebr.img)
27: GROW ()
So where do I put zImage?
Am I actually moving in right direction?
How To Fix WiFi NVRAM WARNING SS
Watch The Procedure Video : https://youtu.be/Cp7hmHO76FA
Step 1 : Download Root Explorer App
Step 2 : Download WiFi Fix Files [Attached Files]
Step 3 : Copy the wifi fix files as WiFi and WiFi_Custom from SD Card.
Step 4 : Paste these files in following root directory data/nvram/APCFG/APRDEB/ and paste it here overwrite the file yes .
Step 5 : click on WiFi then permissions owner and group tick read write rest untick check the images below for better understanding.
Step 6 : Do same with WiFi_Customs permissions owner and group tick read write rest untick.
Step 7 : Reboot smartphone.
How To Fix Invalid IMEI [MTK Devices 5.0] SS
Watch The Procedure Video
Step 1 : Open the software then type your smartphone SN number
Step 2 : Type IMEI1 & IMEI2
Step 3 : Click On MP0B_001 it will generate the MP0B_001 file
Step 4 : Copy that MP0B_001 file in SD Card then open Root Explorer App then DATA/NVRAM/MD/NVD_IMEI paste the file here yes overwrite it.
Step 5 : Restart the smartphone..
Hello. I have a ZTE Blade L2
I made nvram backup, but... when I flashed LineageOS and restore backup....
Files are right, but, user (and group) nvram doesn't exist.
So, file WIFI is not nvram:nvram owner, but root:root.
What can I do?
Thank you.
This is not for soft bricked devices.
This is for hard bricked devices that cant go into recovery or download mode.
This is for devices on the Version 2 Bootloader like samfail v2 or any normal V2 bootloader.
It may work on other bootloader versions with some modification.
If you have a hard bricked device let me know and I will help you test this.
I don't want to just post the files and have people cause bricks by flashing this to non-v2 bootloaders.
People with other versions of the bootloader and a bricked device let me know and we will test some things.
If you need this let me know and we will do some testing.
How to Unbrick
First you need to install the drivers for QDL.
Option A is to install QPST.
I think then the drivers will automatically install in windows when you connect a device in edl mode.
Or you can manually choose the driver to install if you know how.
I will upload both.
Get the device in EDL mode.
It might go automaticall (hopefully).
If not you need a EDL Cabel or Deep Flash Cable.
Theres instruction around how to make one.
After device is in edl mode and connected to the computer open windows device manager.
Under Ports you should see .
https://photos.app.goo.gl/ibD8KYy9GVQFvJheA
I doubt you will see Portable Devices. I have it because of a special sd card.
After you see Qualcomm-HS-USB QDloader under ports your ready to unbrick.
Copy the N950U2 FOLDER TO C:\ ON YOUR COMPUTER.
Open command prompt as administrator.
In search bar in windows type cmd
Right click on command prompt and run as administrator.
cd to the n950u folder
Code:
cd c:\N950U2
https://photos.app.goo.gl/VzJjwsU6NWLdyDCc6
type
Code:
N950U2_Recovery.bat
You should get this window.
https://photos.app.goo.gl/F7hcuPCCqrci9A1KA
type the com port of your edl device and hit enter.
Be sure to copy the log in the terminal window and save it to share with us later.
Heres the files.
https://www.mediafire.com/file/9bb4vgx1kmir4gz/QPST.2.7.472_2018.zip/file
https://www.mediafire.com/file/eo9wcbtdle1xsc8/Qualcomm_Drivers_QDLoader.zip/file
https://www.mediafire.com/file/dfzy3zo8ibrh1p7/Unbrick-Samsung-Qualcom-9008-Files.zip/file
After the flash completes the phone should boot to download mode.
If not try to boot it to download mode.
Look at secure boot status and all of that when you boot to download mode.
If you dont see it power the device off then reboot into download mode again.
Were looking for any change in the bootloader status.
Maybe the edl bootloader is unlocked.
After that its just normal flash by ODIN back to whater you were on.
PLEASE REPORT BACK YOUR EXPERIENCE WHEN YOU DO THIS.
Note I had screenshots but there not showing. Ill try to fix them. Just Click the links for now.
link not working
can you redo the link for the last download please
lilbowza1985 said:
can you redo the link for the last download please
Click to expand...
Click to collapse
All links are working for me.
If you are going to flash the EDL let me know.
I would be grateful to help you see what the state of the edl bootloader is.
Possibly unlockable!!
Please update to BL v5 if possible.
Hey I just gave it a shot to the steps and it did not work. I think maybe because my n8 has a higher BL version, I think v5 actually. Thanks for the post. Hope you could help out updating the recovery to a BL v5. Here are the logs I got.
Input Port Number[1~300,x:Exit]:10
10
Start Recovery.
emmcdl.exe -p COM10 -f prog_ufs_firehose_8998_ddr.elf -MemoryName ufs -SetActivePartition 1 -x rawprogram0.xml -x rawprogram1.xml -x rawprogram2.xml -x rawprogram3.xml
Version 2.10
Downloading flash programmer: prog_ufs_firehose_8998_ddr.elf
Successfully open flash programmer to write: prog_ufs_firehose_8998_ddr.elf
Expecting SAHARA_END_TRANSFER but found: 0
!!!!!!!! WARNING: Flash programmer failed to load trying to continue !!!!!!!!!
Programming UFS device using SECTOR_SIZE=4096
<?xml version = "1.0" ?><data><configure MemoryName="ufs" ZLPAwareHost="1" SkipStorageInit="0" SkipWrite="0" MaxPayloadSizeToTargetInBytes="1048576"/></data>
ERROR: No response to configure packet
Status: 21 The device is not ready.
Finish!!
I got the same error,
I got the same error.......
Can i use this for g892u rev 3
BigCountry907 said:
All links are working for me.
If you are going to flash the EDL let me know.
I would be grateful to help you see what the state of the edl bootloader is.
Possibly unlockable!!
Click to expand...
Click to collapse
my phone cant turn on,i cant go to recovery mode and download mode,what i must do?
plz help
qban-it-solution said:
Hey I just gave it a shot to the steps and it did not work. I think maybe because my n8 has a higher BL version, I think v5 actually. Thanks for the post. Hope you could help out updating the recovery to a BL v5. Here are the logs I got.
Input Port Number[1~300,x:Exit]:10
10
Start Recovery.
emmcdl.exe -p COM10 -f prog_ufs_firehose_8998_ddr.elf -MemoryName ufs -SetActivePartition 1 -x rawprogram0.xml -x rawprogram1.xml -x rawprogram2.xml -x rawprogram3.xml
Version 2.10
Downloading flash programmer: prog_ufs_firehose_8998_ddr.elf
Successfully open flash programmer to write: prog_ufs_firehose_8998_ddr.elf
Expecting SAHARA_END_TRANSFER but found: 0
!!!!!!!! WARNING: Flash programmer failed to load trying to continue !!!!!!!!!
Programming UFS device using SECTOR_SIZE=4096
<?xml version = "1.0" ?><data><configure MemoryName="ufs" ZLPAwareHost="1" SkipStorageInit="0" SkipWrite="0" MaxPayloadSizeToTargetInBytes="1048576"/></data>
ERROR: No response to configure packet
Status: 21 The device is not ready.
Finish!!
Click to expand...
Click to collapse
i have same problem..
Note 8 Bricked after using COMBINATION_FA71_N950USQU5ARJ1_CL13942288_QB203914 89_REV00
seansha said:
i have same problem..
Click to expand...
Click to collapse
Did you get an answer? I can't find a firmware that will work! I'm totally bricked
I flashed this:
COMBINATION_FA71_N950USQU5ARJ1_CL13942288_QB20391489_REV00_user_mid_noship_MULTI_CERT.tar
And i was bricked after.
m4r20 said:
Did you get an answer? I can't find a firmware that will work! I'm totally bricked
I flashed this:
COMBINATION_FA71_N950USQU5ARJ1_CL13942288_QB20391489_REV00_user_mid_noship_MULTI_CERT.tar
And i was bricked after.
Click to expand...
Click to collapse
I am having the same problem and I was working off of the guide to install EDL and Root the Phone Here: https://forum.xda-developers.com/galaxy-note-8/development/root-t3942403
I have been searching for a way to resolve the same behavior and found this post. I noticed the original Guide I followed did not have me install any Qualcomm drivers, I am HOPING to do so using the ones provided here may fix things.
I am also not really happy with the CMD script they used in both this and the other method, it makes the process harder by using a setp to pause at the end instead of a pause or something obvious and by setting the max lines on the CONsole to 40 which over-flowed my screen, so I had to comment it out. Also not sure why they didn't just list the ports in a menu and have you choose or try to guess for you based off how they get it. But thats just somme griping.
I am HOPINNG that the FACTORY BINARY >>>>>> screen I get to in my phone is "EDL" it's unclear to me from the info on these sites, rooting guides have continued to become less clear over the years assuming everyone knows every step like the back of their hands.
im stuck here too. its like I have no bootloader, and I cant flash. no download mode, no recovery. No light when I plug it in to charge...just upload mode. the phone was on BL 6.
Bricked here as well...Same error with failed to load flash programmer..Still stabbing at it with no results as of yet.
please keep me in the loop
Surgeman said:
Bricked here as well...Same error with failed to load flash programmer..Still stabbing at it with no results as of yet.
Click to expand...
Click to collapse
A lot of people don't listen or read anything and @BigCountry907 specifically said this is for bootloader version 2 and it might work for others with "SOME MODIFICATION" but anyone with common sense would know this isn't going to work on version 5 of the bootloader!!
MrMike2182 said:
A lot of people don't listen or read anything and @BigCountry907 specifically said this is for bootloader version 2 and it might work for others with "SOME MODIFICATION" but anyone with common sense would know this isn't going to work on version 5 of the bootloader!!
Click to expand...
Click to collapse
I beg the differ....I have actually got it to flash using the old bootloader jig for the older Notes..But it won't repair the eMMC portion...
@MrMike
Check PM
Sent from my SM-N975U using Tapatalk
My phone is currently the same. If only I could get into edl mode, it would be fixed. But I don't know how to get into edl mode using only hardware
Can I ask a question. A HOW TO exactly would be awesome. Ok I have Sm-N950U running 7.1.1 you know with the 80% only battery. All runs great. Its the Snapdragon version. HOW can I get it back to before I got it this way. Before I did all this it had.. I forget V6..somthing.
Or can you point me to somewhere that really explains this. Getting it to 7.1.1 seem easy vs now trying to get it back.
Thanks
Hi @BigCountry907, i used your method n950u2 with QFIL on my n950w (N950WVLS7DTA1) by enter EDL mode, but got no luck.
Below is the log of QFIL:
Binary build date: Oct 31 2016 @ 22:51:05
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\KN\AppData\Roaming\Qualcomm\QFIL\COMPORT_6
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\temp\n950w\UnbrickQC-9008\N950U2\prog_ufs_firehose_8998_ddr.elf
21:19:39: ERROR: function: sahara_rx_data:237 Unable to read packet header. Only read 0 bytes.
21:19:39: ERROR: function: sahara_main:924 Sahara protocol error
21:19:39: ERROR: function: main:303 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
I also tried with eMMC Dongle app but no luck also.
Loading GUID Partition Table
EMPTY SKIPPING
=> it's mean the main partition is corrupted
Would you mind help me by teaching me the correct way to booting from sdcard then repartition the main Qualcomm’s memory?
The problem of brick: i messed up the Qualcomm’s partition while playing around with "boot.img dqmdbg.img.ext4 storsec.mbn msadp.mbn apdp.mbn sec.dat recovery.img NON-HLOS.bin xbl.elf tz.mbn abl.elf bksecapp.mbn keymaster.mbn cmnlib64.mbn rpm.mbn hyp.mbn cmnlib.mbn devcfg.mbn pmic.elf adspso.bin modem.bin" then flash with Oddin via BL slot.
Many thanks and best regards!