I installed CWM touch, and superuser zip folder on my Galaxy note (att)
So I read a tut that said to wipe everything so I did on recovery mode, booted it up, worked good, went back because superuser didnt work right. I installed 3-4 times before it said success, now its goes to a crisp samsung logo, then goes blurry and stops.....
Stupid noob mistake I didnt backup anything. Figured it was simple as jailbreaking an iphone (which you cant mess up on, plug in, hit button, done)
I been trying it all but just cant get it to work.
If your phone still boots up
youre not bricked...
Odin back to a stock firmware (GB or ICS)
and start again
jayRokk said:
If youre phone still boots up
youre not bricked...
Odin back to a stock firmware (GB or ICS)
and start again
Click to expand...
Click to collapse
+1.
And if you can't find how to do that, you need to read more before flashing
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
It boots to the samsung logo, but not lock screen. And I'm phoneless now Lol.
Since I was just updated to ICS (att) and did CWM/superuser, would I just have to use odin>PDA with a tar file?
if so which file? I tried that but no luck.
welchertc said:
+1.
And if you can't find how to do that, you need to read more before flashing
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I been reading alot but seems like there is a hundred different explanations or ways to do it, and hard to find the right way?
liftedzuki said:
Since I was just updated to ICS (att) and did CWM/superuser, would I just have to use odin>PDA with a tar file?
if so which file? I tried that but no luck.
Click to expand...
Click to collapse
Yes its a .tar file
And search for it buddy there is a whole thread on official ICS and with it the CWM file and SU file to get you going
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1566976
Tried this tar, and it
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> FixRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
liftedzuki said:
http://forum.xda-developers.com/showthread.php?t=1566976
Tried this tar, and it
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> FixRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You need to stop flashing before you mess up your phone
Stop and read
Why are you flashing that?!?!?!
You have an NOTE
Really stop and read read read
I'm surprised you haven't bricked it yet
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
jayRokk said:
You need to stop flashing before you mess up your phone
Stop and read
Why are you flashing that?!?!?!
You have an NOTE
Really stop and read read read
I'm surprised you haven't bricked it yet
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
:silly: I got it from a link in this note section, I should have seen that though.
So if I flash it, does it flash over the other flash? or does it add to it.
I'll continue readin.
Not all Samsung's are the same. You should only be getting tar files from your specific section. Keep in mind you need to match the model number
Sent from my SPH-L710 using Tapatalk 2
I would suggest going here and flashing one of these one clicks in Odin:
http://forum.xda-developers.com/showthread.php?t=1647756
Sent from my SPH-L710 using Tapatalk 2
And if I'm not mistaken you want the first link. I don't have a note so maybe someone here can chime in.
Sent from my SPH-L710 using Tapatalk 2
That link worked good. Thanks so much to everyone, I about had a heartache as I got my phone like 3 months ago, and just got ICS on it.
This time I'm gonna read alot more before I try it again.
Good idea. Glad it worked. If ya ever have any questions in the future , don't hesitate to ask BEFORE flashing.
Sent from my SPH-L710 using Tapatalk 2
Definitely not gonna be doing it til next weekend. I didnt plan on doing it today just was messin with my phone since galaxy S3 is out, and wanting to make my phone a little cooler, and did it before I had lots of research under my belt. :silly:
Haha it happens. Just be glad ya didn't end up with a huge note shaped paperweight
Sent from my SPH-L710 using Tapatalk 2
liftedzuki said:
Definitely not gonna be doing it til next weekend. I didnt plan on doing it today just was messin with my phone since galaxy S3 is out, and wanting to make my phone a little cooler, and did it before I had lots of research under my belt. :silly:
Click to expand...
Click to collapse
OP if your good to go, can you put Solved in your title....
thank you sir
Related
Dear Friends
I HAVE MESS-UP WITH MY i9300!!!!
The incident is I was using custom rom, and installed some stupid app called "Adblock" or something,
and then, my phone just keep went-off for about 8-10 times a day. So then, I decided to reflash
custom rom by CWM, and after I pressed install in Aroma Installer, it just kick me out all of sudden, and
then, I couldn't get back to CWM anymore, so I decided to flash some stock rom by odin, but what
had happen was it starts until "Nand write start" and stacked for a while, and then just FAIL me.
On the net, I found that Checkrom Resurrection V4 could rescue softbrick i9300, I tried, but
no luck either. Finally, just now, I tried a 3 files stock rom with pit, and it came out as:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noshi p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
What I have done:
1. reflash custom rom by CWM
2. 3 wipes - (but I am no longer to get back to CWM)
3. flash stock rom - hong kong combo firmware @ Samfirmware - by Odin
4. flash Checkrom Resurrection V4 by Odin
5. flash stock rom - 3 files firmware + pit - by Odin
6. changed usb port
7. changed PC
8. uninstall all applications relative to Kies
have you guys got any idea what can I do? I am thinking to mess-up the phone even badly (till it couldn't switch on), so that I can take it to Samsung Service Center for warranty replacement, but have you got ANY method I can do that to mess it up? Or anything I can over-come from the soft (or hard) brick. PLEASE Give me some help guys. I am very struggle.
Wrong thread.. Needs to be in Q&A
Try a fully stock rom with Odin 1.85
Sent from my GT-I9300 using xda app-developers app
Kingybear said:
Try a fully stock rom with Odin 1.85
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks Mate, but no luck
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NatTheCat said:
Wrong thread.. Needs to be in Q&A[/QUOT
I put it on Q&A already, but just wanted to have more people can help, so I put it on here. sorry for any disturb.
Click to expand...
Click to collapse
The fact that you want more people helping you doesnt mean that you can do what you want, wrong section.
By the way, it seems that your s3 is bricked pal.
Sent from my GT-I9300 using Tapatalk
anyone can tell me how to delete the thread? Thanks
aguerito said:
The fact that you want more people helping you doesnt mean that you can do what you want, wrong section.
By the way, it seems that your s3 is bricked pal.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
show the poor guy some love dude, your comments are abrasive he only wants help for his expensive phone sheesh
---------- Post added at 10:03 AM ---------- Previous post was at 09:59 AM ----------
I wouldnt panic yet they say its very hard to brick an S3?
check around and see what you can find out
kk12175 said:
Thanks Mate, but no luck
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
jothi2lingam said:
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
i was using Omega since v.9 until v33.2 at the last minute. and I found a video in youtube to resurrect my s3 by flashing Checkrom v4:
http://www.youtube.com/watch?v=ZNaQfdOi56E
tried it as well, but it seems doesn't work as it kept rebooting / hanging at the Galaxy S3 logo. And I tried to flashed some stock rom (combo file) from Samfirmware, no luck neither. Tried to flash some stock rom (3 files + pit) HK base rom. Same happened. Fail after Nand Write Start.:silly:
and now, couldn't get into CWM neither.
jothi2lingam said:
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Been using adblock for a while myself and never had a hiccup .. excellent app..
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
johnkhor123 said:
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I had flashed custom rom before, do you think I can still use the warranty? If yes, definitely going.
kk12175 said:
Dear Friends
I HAVE MESS-UP WITH MY i9300!!!!
The incident is I was using custom rom, and installed some stupid app called "Adblock" or something,
and then, my phone just keep went-off for about 8-10 times a day. So then, I decided to reflash
custom rom by CWM, and after I pressed install in Aroma Installer, it just kick me out all of sudden, and
then, I couldn't get back to CWM anymore, so I decided to flash some stock rom by odin, but what
had happen was it starts until "Nand write start" and stacked for a while, and then just FAIL me.
On the net, I found that Checkrom Resurrection V4 could rescue softbrick i9300, I tried, but
no luck either. Finally, just now, I tried a 3 files stock rom with pit, and it came out as:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noshi p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
What I have done:
1. reflash custom rom by CWM
2. 3 wipes - (but I am no longer to get back to CWM)
3. flash stock rom - hong kong combo firmware @ Samfirmware - by Odin
4. flash Checkrom Resurrection V4 by Odin
5. flash stock rom - 3 files firmware + pit - by Odin
6. changed usb port
7. changed PC
8. uninstall all applications relative to Kies
have you guys got any idea what can I do? I am thinking to mess-up the phone even badly (till it couldn't switch on), so that I can take it to Samsung Service Center for warranty replacement, but have you got ANY method I can do that to mess it up? Or anything I can over-come from the soft (or hard) brick. PLEASE Give me some help guys. I am very struggle.
Click to expand...
Click to collapse
Try TURN OFF antivirus, update Kies, Try on other OS.
Because I had the same problem with own S3.
Windows 8, AVG IS 2013, Odin 3.07,3.04.
Everytime after few second Odin stop working and show FAIL "Complete(Write) operation failed."
But on Windows 7, updated Kies to 2.5, turned off AVG, Odin 3.07, fresh downloaded rom ELK4, Galaxy S3 slowly but finished NAND write
and now I am happy againg
johnkhor123 said:
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Ya i think so,,Same incident for previously after flashed one of the rom from this thread i went to sleep..The phone was reboot itself (stuck in bootloop) till i found at morning, my phone fuc**ing hot stucked in Samsung Galaxy SIII. After tried flashed using odin & using cwm not worked because my phone keep on rebooting. Once send to sammy centre i said that i put in charge, once wakeup in morning my phone keep on rebooting & so hot. So after one week they replace me new board for my s3 even they can see my cwm. I tried to delete cwm but cant. Thank god atlast they replace my s3. so only way is send to samsung centre. I face exactly same issue previously as you facing now
KKTHX said:
Try TURN OFF antivirus, update Kies, Try on other OS.
Because I had the same problem with own S3.
Windows 8, AVG IS 2013, Odin 3.07,3.04.
Everytime after few second Odin stop working and show FAIL "Complete(Write) operation failed."
But on Windows 7, updated Kies to 2.5, turned off AVG, Odin 3.07, fresh downloaded rom ELK4, Galaxy S3 slowly but finished NAND write
and now I am happy againg
Click to expand...
Click to collapse
sounds good. give it a try .. thanks MATE
kk12175 said:
anyone can tell me how to delete the thread? Thanks
Click to expand...
Click to collapse
Thread closed.
So after attempting to do the new rooting method, my computer lost power halfway through and now is stuck on the kies recovery screen. I tried to flash back to stock via Odin, but it always failed. Any advice? (I'm assuming that id need to flash a new bootloader, but I cant find a stock one that would work with Odin. any help would be appreciated
mattman3512 said:
So after attempting to do the new rooting method, my computer lost power halfway through and now is stuck on the kies recovery screen. I tried to flash back to stock via Odin, but it always failed. Any advice? (I'm assuming that id need to flash a new bootloader, but I cant find a stock one that would work with Odin. any help would be appreciated
Click to expand...
Click to collapse
refer to section 1b of my guide.
droidstyle said:
refer to section 1b of my guide.
Click to expand...
Click to collapse
I just tried that, with the pit in the pit spot and the other download in the PDA spot. I got this message
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.bin
<ID:0/005> recovery.img
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Use the "alternate restore" download from here
http://forum.xda-developers.com/showthread.php?p=35265728
Sent from the dark on a Note 2
if you pay attention to the guide you would of seen to use the alternate restore link if your on the latest L4 ota.
tniewo was
droidstyle said:
if you pay attention to the guide you would of seen to use the alternate restore link if your on the latest L4 ota.
Click to expand...
Click to collapse
when I download the alternate, both of them, they don't show up in Odin... Help? tried the forum and couldn't find the answer
kintwofan said:
Use the "alternate restore" download from here
http://forum.xda-developers.com/showthread.php?p=35265728
Sent from the dark on a Note 2
Click to expand...
Click to collapse
Damn, my man. How many times a day do you think you say "alternate restore "? Lol. I just saw the other thread where dude didn't know what you meant. Thought it was his "alternative option".
You're nice. I couldn't do it. Lol.
Sent from my SCH-I605 using Tapatalk 2
1ManWolfePack said:
Damn, my man. How many times a day do you think you say "alternate restore "? Lol. I just saw the other thread where dude didn't know what you meant. Thought it was his "alternative option".
You're nice. I couldn't do it. Lol.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Ya in a pretty patient guy. Eventually I'll get tired of it. Just like when cm10.1 dropped for s3 and every body was roaming.
Sent from the dark on a Note 2
Ok so by daughter let her boyfriend try to root her phone well this guy messed her phone all up he flashed a sprint image onto a verizon phone.
So it's not fully bricked yet I was able to use this post http://forum.xda-developers.com/showthread.php?t=2024207 and put verizon image back onto the phone after about 58 times I used Root66 stock VRALJB 4.1.1 12/2/12 it boots but it seems the radio is still messed up it has a big circle with a line threw it where the signal bar would be and there is no info Min,PRL,network. if I try and flash I605_VRALJB_Restore.tar.md5
if fails at radio if i try and flash sch-i605-16gb.pit it fails. If I try and do this it fails do to the pit http://forum.xda-developers.com/showthread.php?t=2272066. and throws up a error about catch and dev catch. this is all new to me but with all the helpful post on xda it's gotten
me this far. so Is there any way to fix this phone or is it shot
http://forum.xda-developers.com/showthread.php?p=35833930
There is a thread with all the vzw modems, but I can't find it right now . The third post in this thread has a section titled add ons and it has the most current vzw modem. Try flashing that in recovery and see if you get a signal
thanks that helped now to figure out how to fix the pit
zeroloop said:
thanks that helped now to figure out how to fix the pit
Click to expand...
Click to collapse
In the first linked thread you posted, in section 1b use the Root66 and the pit file. That should work
And just a side note, only use files and info for the vzw sch-i605. Do not try anything from a different carrier's version of the note2. Nothing good will come of it
Ok this is what happens when i try and flash the pit sch-i605-16gb.pit from the above post
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
This is what happens when i try and use oden to go back to CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
that kid did a good job on her phone smh
zeroloop said:
Ok this is what happens when i try and flash the pit sch-i605-16gb.pit from the above post
that kid did a good job on her phone smh
Click to expand...
Click to collapse
Are you using the Root66 and pit file at the same time in Odin? If you are just using the pit file, use both and see what happens
flashing another carriers modems is a big no no....tell your daughter to dump the dumbass!! lol
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
droidstyle said:
flashing another carriers modems is a big no no....tell your daughter to dump the dumbass!! lol
Click to expand...
Click to collapse
I was hoping you would see this thread and chime in. Is there any chance of hope for this guy?
yea this guy she is dating is a real job smh
like Boosted was asking any hope for me or is this a waste of my time I'm a big noob with all this I know how to read and that's what has got me this far and the help of Boosted. but no matter what i do the pit fails and it fails at radio in the flash and at this moment it says baseband version unkown and still shows no network even after flashing the modem and it says it took it
zeroloop said:
yea this guy she is dating is a real job smh
like Boosted was asking any hope for me or is this a waste of my time I'm a big noob with all this I know how to read and that's what has got me this far and the help of Boosted. but no matter what i do the pit fails and it fails at radio in the flash and at this moment it says baseband version unkown and still shows no network even after flashing the modem and it says it took it
Click to expand...
Click to collapse
I guess the better question is since it is your daughter's phone, you did get insurance on it, right? If so, get a hammer and beat the hell out of it to take out your frustration about the boyfriend. Then call verizon and say you need a new phone because your daughter says she "dropped her phone." Pay the deductible and call it done
Well that's why I'm here or i would have took a sledge hammer to it but I got the phone from a friend. so if i cant fix it I'm sol
zeroloop said:
Well that's why I'm here or i would have took a sledge hammer to it but I got the phone from a friend. so if i cant fix it I'm sol
Click to expand...
Click to collapse
Quite a few years ago I got a phone from a friend and I called and they let me add insurance to it. I broke it like 3 months later and got a replacement. It can't hurt to call and find out
ancDis and
ok will try that Monday
Ok called them they will not do anything not there phone so they will not cover it at all so guess it's trash unless someone has anymore ideas
zeroloop said:
yea this guy she is dating is a real job smh
like Boosted was asking any hope for me or is this a waste of my time I'm a big noob with all this I know how to read and that's what has got me this far and the help of Boosted. but no matter what i do the pit fails and it fails at radio in the flash and at this moment it says baseband version unkown and still shows no network even after flashing the modem and it says it took it
Click to expand...
Click to collapse
I will do some digging around but its not looking good.
droidstyle said:
I will do some digging around but its not looking good.
Click to expand...
Click to collapse
ok thanks for all the help
Yep, he really fubar'd it. He must have flashed both Sprint rom + Sprint radio. People often flash roms built for other carriers with no issues, but if you flash a Sprint radio on a VZW phone, your odds of bricking increase exponentially. I would make the boyfriend buy a new phone and be done with it.
Sent from my SCH-I605 using Tapatalk 2
** Thank you to JGeigerM, hexitnow, and joderme for the solution.
** Solver was paid.
** I leave a condensed version in case someone is frantically googling like I was.
[Background]
I downloaded VRUAME7 for my Galaxy S4.
I then tried to flash Blue Toggles apk.
I then began getting the message "Unfortunately, System UI has stopped".
I decided to use Odin to attempt to flash MDK firmware, which FAILED as you will see below:
**ODIN LOG**:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRUAMDK_NoWipe.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NON-HLOS.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
**PHONE LOG**
START [224, 1448]
SW REV. CHECK FAIL : fused : 3, Binary : 1
**SOLUTION**:
(1) Verizon GS4 I545 VRUAME7 Stock Image = http://invisiblek.org/sch-i545/SCH-I...3crny1_fac.zip
(2) Unzip that file when downloaded
(3) Run Odin 3.07 (latest as of posting) as administrator
(4) Select .MD5 file that you unzipped as a PDA
(5) Hit Start once it loads
Here is the link to the stock ME7 image... http://forum.xda-developers.com/showthread.php?t=2357235
Try this one and see if it works.
You were trying to flash the mdk firmware which you cant flash back to once on me7. the stock me7 file is at this link
http://forum.xda-developers.com/showthread.php?p=43420116
The mods for me7 need to be made for it most of the time I believe framework is quite a bit different from mdk which is why you got yourself a soft brick. Im gonna put this out there just in case yoh were looking into it but youre unable to flash a custom recovery on me7 or else youll get another soft brick of sorts. There are people working on it tho.
Sent from my SCH-I545 using Tapatalk 2
EDIT: Solved
I'm glad I could help. XDA forum stalking has become my new habit so I saw it when you posted :good:
EDIT: Solved
Yeah that was a bad download. Another user posted the same thing. After he redownloaded it he was good to go.
Sent from my SCH-I545 using Tapatalk 2
It lives!
Thank you all so much again.
A mod can switch this to solved.
I'm trying to contact JGeigerM for payment.
Sorry, hexitnow, you were 2 minutes later than his original link.
m0bstr said:
It lives!
Thank you all so much again.
A mod can switch this to solved.
I'm trying to contact JGeigerM for payment.
Sorry, hexitnow, you were 2 minutes later than his original link.
Click to expand...
Click to collapse
I wouldnt of accepted anything for payment so im not worried bout it. You can edit your post and add solved to the title. Glad you got it going though.
Sent from my SCH-I545 using Tapatalk 2
It wasn't much help to send you just a link to an image.
Sent from my SCH-I535 using Tapatalk 4
Looks like I'm running into a brick wall trying to root this damn phone. first I soft bricked I but thankfully recovered but now after trying to root unlock using Casual and getting errors with generic usb drivers while in download mode I figured I'd be happy enough with just a root but ran into issues there as well. I'm currently running android 4.3 and every time I run Odin I get the following. I have tried v3.09. 3.07 and 1.87 and get the exact same error. I never had this much trouble rooting and unlocking my AT&T note 2 but Verizon is a nightmare. BTW I tried about 6 different versions of Casual and none worked. All of them take me to the recovery download screen and error out due to various reasons. In any case If anyone can guide me to get my I605 rooted, I would greatly appreciate it. On a side note could I downgrade to root66 rom and get rooted that way or would that brick my device? After that can I install custom roms? I don't have warranty any more and don't care about that. Just want root and custom roms and maybe an unlock
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t0ltevzw-t0ltevzw-schi605.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This won't work on stock 4.3 rom.... There is only one way of rooting and that is not recommended at xda.... But bootloader will not unlock at present
Sent from my SCH-I605 using XDA Premium 4 mobile app
nikhil.kdhand said:
This won't work on stock 4.3 rom.... There is only one way of rooting and that is not recommended at xda.... But bootloader will not unlock at present
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the response, I was afraid of that I guess ill have to wait until there is a bootloader unlocker available for it. That one method you talk of is kingo right?
Ya... Kingo is the only option that I know
Sent from my SCH-I605 using XDA Premium 4 mobile app