SPIGEN SGP roudup: GLAS.t, Stehen, Valentinus - AT&T Samsung Galaxy Note I717

SPIGEN SGP roudup: GLAS.t, Stehen, Valentinus - AT&T Samsung Galaxy Note I717

1.0 Introduction
This thread is a combined review of some Spigen products designed for the Samsung Galaxy Note. I chose these three items because of their special features. I will be reviewing each product individually.
1.1 Initial Impressions
When I first opened the delivery, I was very impressed, the company have designed their packaging to be minimalistic, clean and… “stylish” – as SGP put it.
Now, I know a lot of people on XDA are not a fan of Apple, but in my honest opinion, Apple have some of the best looking packaging – and SGP’s products really look as good as Apple’s – so credit to them!
One of the first things that I thought about was the name of the company: is it SGP? Is it Spigen? Spigen SGP? – and to add to the confusion they have the slogan: “Stylish people’s Good Partner” – which I guess is what SGP stands for – but it could be SPGP, SPG, SGP, etc etc. And anyway, where does Spigen come into it? What I am trying to get at is: I feel the brand needs a tidier image. Personally I feel that “Spigen” sounds a lot better than SGP. And “Stylish people’s Good Partner” just sounds… cheesy. I would have the company rebranded with simply: “Spigen”. It may seem that I am picking on a relatively insignificant detail in a product review, but I know how important brand image is.
Anyway, enough of all that.
The thread now splits into the three sections:
1) Stehen Leather Case
2) Valentinus Leather Wallet Case
3) GLAS.t Premium Tempered Glass Screen Protector
4) Final Thoughts

2.0 Stehen Leather Case
N7000: http://www.spigen.com/cell-phone/sa...g-galaxy-note-leather-case-stehen-series.html
I717: http://www.spigen.com/cell-phone/sa...axy-note-at-t-leather-case-stehen-series.html
Available in: Black, Camel and Dark Green
2.1 Exterior
The Stehen case is a product that I am particularly excited about because it has a sturdy polycarbonate housing AND a flip cover that folds into a stand for movies – which is a really useful feature!
When you first take the case out of the packaging, you immediately notice the quality of the product. All the stitching is straight, the same colour as the leather and finished properly so it won’t unravel after 10 minutes.
Similarly the leather feels like it should on a premium product – very smooth/supple, with realistic ridges, and a faint aroma. I know the leather is not real, and the product even says “Faux Leather” on the back – so it doesn’t try to deny it – but the faux leather that they have used is very high quality.
Another thing I really like is the fact that on the back, they have not tried to cover every inch with leather – they have let you see the polycarbonate shell which, in my opinion, was a good decision.
The black and brown really complement each other and with the black Note - it really looks like a professional outfit. Another reason I like the fact they have not covered the shell in leather is that when you try to wrap contoured edges in leather, the leather creases and it looks bad – and the device doesn’t sit in it as snugly.
The tab to close the case is something I am unsure whether I like. At first I wondered why they haven’t just put a popper like on their Valentinus case, but that is not possible due to the fact that this case has a stand feature (something you will see later). On one hand I like the tab because you can push it in tight to control the slack. On the other hand it is a bit fiddly to get out and I can see the leather fraying over time. At any rate, it is a little fiddly to open the case and so I imagine that would annoy a lot of power users.
I hope that SGP revise this in a later edition.
Take note that the shell gives the camera lens, flash, and speaker about 2-3mm of protection which is very good – don’t want to scratch your camera lens!
The construction of the case is simple, but effective; it is a leather and microfiber exterior glued on one side to the polycarbonate shell. The construction is very strong and I doubt it would unstick without some serious effort on your part. This really is a premium product in every sense of the word.
2.2 Interior
When you open up the case you are greeted with a greyscale colour scheme – very professional looking. There is a sticker on the inside of the shell that lists the details, serial number for warranty purposes, and a reassuring authenticity logo.
The polycarbonate shell has all the cut outs that you would expect and the device sits very nicely inside. You can press the buttons easily and the cutouts are large so access for micro usb and headphones is good. When you put the device into the shell, I recommend you put in the side with the power button first and then snap it down. It goes in with a satisfying snap and sits in it very solidly.
The other side of the case is the microfiber backing of the leather. The microfiber is soft and provides a little extra protection to the screen. Do not, however, think that you can polish/clean your screen with this as there is very little play (because of the cases solid construction).
Creeping in on one side of the microfiber cloth is the company logo. This is a very nice addition and these small details are what make me think the company really designs their products for a premium market and not just pump out as many cases (for as many devices) as possible - like so many other manufacturers.
2.3 In Use
Here you see my Note sitting atop my Official Samsung Pouch and the Stehen case. What is apparent is that the Stehen hugs the Note much closer than the pouch. The pouch is much wider than the Note and so feels a lot larger in your pocket – the Stehen, however, feels much tighter to the device and so not as large.
The two sections in the front leather are so that you can fold the front back and then push the tab back through the loop – in doing so, the front leather folds so that the device can stand. The stand is ingenious as it allows the device to sit at two angles: both a shallow angle for reading and a steep angle for watching TV shows. Personally what I do is have the device in the stand position with my BF3 stats/unlocks as I game
Interestingly, the positioning of the embossed “Stehen” is just so that it comes up above the top of the device when in stand mode – just enough to frame the device – a very nice touch.
One thing to mention is that, at first, I found the flip cover kept getting in the way and my natural response would be to try to bend the flip right the way back and try to hold the device normally (without a case). Now I hold it differently and it is much more comfortable; I open the flip and hold it like a book – it promotes the use of the s-pen too!
2.4 Conclusion
I have been pondering how I would award the Stehen case for quite some time. It IS a premium product, but it demands a premium price tag – and I’m not sure everyone would be comfortable putting down $44.99 for one.
Pros:
- Great quality leather
- Very sturdy shell
- High grade microfibre
- Useful Stand feature
- Fantastic Customer service
Cons:
- Leather tab a bit cumbersome
- Expensive
I have been thinking whether it is unreasonable to ask $45 for a case, and my answer to that is NO, it is not unreasonable. The whole point about SGP is that they offer a premium product that they stand by with their great customer service – so I think it is, in fact, very reasonable.

3.0 Valentinus Leather Case
N7000: http://www.spigen.com/cell-phone/sa...te-leather-wallet-case-valentinus-series.html
I717: http://www.spigen.com/cell-phone/sa...te-leather-wallet-case-valentinus-series.html
Available in: Black, Camel and Dark Green
3.1 Exterior
The Valentinus is advertised as a “wallet” case – I’ve never had one of these before so was excited to try out its special feature!
When you first take the case out of the packaging, you immediately notice the quality of the product. All the stitching is straight, in the same colour as the leather, and finished properly so it doesn’t unravel after 10 minutes. Similarly the leather feels like it should on a premium product –supple, with realistic contours, and a faint aroma. (Interestingly, the back of the Stehen said “Faux Leather”, the Valentinus did not have this imprinted.)
The backing of the Valentinus is much more “book-like” than the Stehen. With the Stehen, the leather is wrapped around the shell; with the Valentinus, the shell is glued onto the leather – you’ll see what I mean in the images.
The style of the Valentinus is more mature than the Stehen, the leather has been punched through for the camera/speaker – a much more premium look.
The leather front has an embossed look, personally I would have preferred if it said “Galaxy Note” or something but I fully understand why they didn’t: 1) they’d have had to pay royalties to use the name I imagine 2) they want it to be about the case, not the device.
The popper that closes the case is excellent: it feels secure and solid, but not so tight that it feels like you’ll damage the case prying it open.
I much prefer the fastening on the Valentinus compared to the Stehen (but I understand why SGP had to go with it).
Another small addition is the “Designed by…” on the side – another quality touch!
On a side note, I have been told by SGP that the Valentinus is their newest case, and I really hope that they update their older cases (like the Stehen) so that all their products are uniform. There are a few styling differences between the cases:
1) The polycarbonate shell on the Valentinus feels slightly smoother and better finished than the shell in the Stehen
2) The polycarbonate shell on the Valentinus has a hollow corner on one side
3) The backs of the cases: one reads “SGP CASE, Faux Leather” and the other reads “spigen”, which I much prefer. On the website, however, the images on both read “SGP CASE, Faux Leather”.
4) The “Designed by…” print on the side of the shell is not there on the Stehen
5) Different positioning of “Valentinus” and “Stehen” on the cases, and different fonts
6) Different patterns on the microfiber
7) There are different colour names for the cases on the website: “camel” and “brown”, even though they are the same.
I hope that SGP revise their product line with their new design tweaks so that the range of products looks a little neater/tidier.
Please note that I am being very picky and this is not detracting from the quality of the cases – it is just an observation.
3.2 Interior
When you pop the clasp on the Valentinus and open the case, you are greeted with a brown and black interior that looks fantastic.
Microfibre backs the right side of the case, all of it embossed with the SGP logo – another exquisite touch.
And the main event… the wallet part of the case
Here we see space for 4 cards and a slot to store “larger valuables”, as the diction reads.
The Note sits very snuggly inside the case, it is a well rounded package and really suits the device.
The polycarbonate shell has all the cut outs that you would expect and the device sits very nicely inside. You can press the buttons easily and the cutouts are large so access for micro usb and headphones is good.
When you put the device into the shell, I recommend you put in the side with the power button first and then snap it down. It goes in with a satisfying snap and sits in it very solidly.
One design feature that I would have like to see from the Stehen, is the small SGP embossed logos coming in from the bottom left – it really is a lovely touch – and I would have rather that than the embossing on the microfiber backing (but this is a personal choice).
Overall I feel that the Valentinus has been made for a more mature audience than the Stehen. The Valentinus feels like it was designed for use by a businessman and as such, has very professional look to it. The Stehen has a much more urban-chic-youth look to it in my eyes.
3.3 In Use
This portion of the review was difficult for me to write. The original PR states that the case: “…combines the essentials of your phone and wallet, rendering an all-in-one solution…
Also on the website it states: “Additional Storage Space - The Valentinus Wallet also includes additional storage space for cash or miscellaneous items.”
Now, I have never had a wallet case before, and I was very excited at the prospect of being able to combine two things that I always carry into one
As you can see, the case will accept £5 notes, but £20 notes are too large to fit flat (they would need to be folded)
I know that US money is smaller than UK money, so I felt that if it fit US money, that would be acceptable
But even a $20 note wouldn’t fit flat
Now, I am from the UK and when I think about my wallet, there is both a mixture of cash and cards. However, I know people in the US that carry a wallet and will only have cards (perhaps an emergency $20 note)
So it is excusable that not all notes fit in it properly – manufacturers design largely for their target audience, which I imagine is the US in this case, so to carry 4 cards and some emergency cash is acceptable imho.
Also remember that SGP design the case to fit the device, not the money, and money is different all around the world – so I’ve cut them some slack– if you need money in it that badly, just fold it up and put it in
On a final note, I would be a bit careful not to apply too much pressure - the edges of the cards rest directly on the device’s screen so it may leave a few marks over time.
3.4 Conclusion
The Valentinus is SGP’s newest case, and I feel it is a step in the right direction for the company.
Pros:
- Great quality leather
- Very sturdy shell
- Cards (and cash) wallet feature
- Fantastic Customer service
- “spigen” not “SPG CASE” on the back
Cons:
- Consider what you carry in your wallet
One final thing I would like to say is that this is both a premium case AND a premium wallet, so would I pay $44.99? You betcha!

4.0 GLAS.t Premium Tempered Glass Screen Protector
N7000: http://www.spigen.com/cell-phone/sa...tor-glas-t-premium-tempered-glass-series.html
I717: http://www.spigen.com/cell-phone/sa...tor-glas-t-premium-tempered-glass-series.html
Make sure that you order the correct one because there is a physical difference between the two (home buttons are different)
Also, there is a $5 difference between them which I imagine is because the N7000 needs more machining for the home button cut-out
4.1 Overview
The tempered glass screen protector is something of a novel idea and I really wanted to try it. The plastic screen protectors that you can get are only really useful against scratches – if you drop the device, the screen will still shatter.
Now, I am not ruthless enough to fit the protector and then go and drop my device, screen-down, to see if the screen protector stops my device’s screen from cracking – youll have to jump onto youtube for that
In the package, you get the protector itself, an alcohol swap for cleaning (NOT Dutch Courage ), a squeegee, a microfiber cloth and an authentication card
One comment that I read on XDA was someone who questioned whether having the Glas.t meant they had to also use a normal screen protector ontop of it. My answer is: NO – this should provide incredible protection by itself – and I feel it does.
4.2 Installation
Installation of the Glas.t was very nerve wracking – you are holding a $40 piece of tempered glass and just one single piece of dust can ruin the whole event – and you don’t have a spare.
My advice is to run a hot shower/bath, let the room fill with steam, stop the water running, let the steam settle down, hold the screen protector like you hold your device when watching a movie and slowly lower it down
You can slightly adjust the protector if it is a millimetre out – and then push it down and watch as the protector works out all the air and bonds to your devices screen – AH SWEET RELIEF! :fingers-crossed::fingers-crossed:
Notice that the protector has such good clarity that dont even need to cut out a hole for the front facing camera
4.3 In Use
This screen protector is unlike any I have ever used. I have used the El Cheapo $1 ones, I have used more expensive SGP ones, but this beats the lot hands down!
The protector is SSSSOOOOO SMOOTH – it is exactly like your touching the devices screen!
Not only that but there are no fingerprints at all – I have been using SGP’s STEINHEIL ULTRA CRYSTAL for the past 4 months and it smudges… badly – but the Glas.t has a oleophobic coating which stops all that.
One thing that you do need to get used to is the home button is a lot deeper than it once was – the protector may only be 0.4mm but the home button feels much more recessed.
It isn’t a problem, but it would have been nice for SGP to include that bit of glass they cut out (N7000 only) so that we could choose whether to stick it onto our home buttons, after all, the N7000 version is $5 more.
(bare in mind the Iphone version gets lots of cool colored home buttons to choose from as well)
In terms of actual hardness, the Glas.t has the same hardness as Gorilla Glass (a 9 on the Mohrs hardness scale) but i know id much rather give $40 for Glas.t than $150+ for a device screen replacement!
When using the device, the responsiveness, colours and general usage is exactly as if you had no protector on at all – it is really fantastic!
The edges of the glass are not sharp, but I would recommend that you use the device with a case as you don’t want to chip it
4.4 Conclusion
The Glas.t is a very impressive product, it has really changed my opinions on screen protectors
Pros:
- Anti fingerprint coating
- Rivals Gorilla Glass’s hardness
- Colours/clarity are excellent
- Very smooth
- Protects front camera too
Cons:
- One shot installation
- Cant be reused
- Home button feels a bit deep
- Expensive considering there is no spare in case of a bad installation
The Glas.t is a product that I really love, it provides more protection than a normal screen protector, but doesn’t succumb to any of the limitations.
What I would like to see, however, is SGP include the bit of glass they cut out for the home button because for the extra $5, N7000 users aren’t getting anything more.

5.0 Final Thoughts
I have guided you through some of SGP’s greatest accessories for the Galaxy Note, giving my thoughts and opinions in what I hope is a fair and thorough analysis.
I would like to just comment on the company as a whole. In all my dealings with SGP, their website, their representatives, their products, etc – I feel that they really want to design and make quality products.
The people that work there really think about the end user, and yes, they have overlooked some small details, but compared to 99% of other case manufacturers, they are leagues ahead.
I have already mentioned that, I feel, SGP need to consolidate their branding a little, but considering their products, and their excellent customer service – I honestly feel that they could be market leaders.
So... Which of these products will _I_ choose? Well I certainly am going to use the Glas.t, but I think my heart lies with the Stehen - the Valentinus is too grown up for me

Thanks for great detailed reviews and photos. It was really helpful for my purchase decision. I have installed Glas.t a month ago and love it, and now I might try leather case on it.
Sent from my SAMSUNG-SGH-I717 using xda premium

^which of the cases do you prefer?

feel free to ask me about any of the products guys

Related

Gumdrop Droptech case review

Just received the new Gumdrop Droptech case for my Prime.
I was surprised by the weight of the Fedex box that the case came in, as soon as I opened it I understood why. The Prime itself is no lightweight, and the Gumdrop case probably weighs half what the Prime does. There are no installation instructions included with the case, I didn't need any, I have owned a couple of Otterbox cases for my phones, if you are familiar with the way things are generally done in a multi-layer case it's not hard to puzzle out. However I think Gumdrop may be giving the general public a bit too much credit here, it wouldn't hurt to slip some simple graphical instructions into the box. The front layer which includes the integral screen protector snaps on to the Prime and the silicon rubber layer enfolds everything. Spend thirty seconds making sure the tabs are seated in the slots and you are finished. Installation takes less than a minute.
The Screen protector is great, I didn't bother removing my old screen protector before putting it in the gumdrop, and there's really no need. The screen works perfectly through both layers. I didn’t notice any diminution of image quality or responsiveness .
Silicon rubber tends to be tacky and pick up lint like a magnet. I was pleasantly surprised by the texture of the Gumdrop, it's not nearly as tacky as I have come to expect silicon rubber too be, the texture of the rubber is quite smooth, and I really don't expect to see it picking up lint like it's on sale. The case is HEAVILY molded however in almost a tire tread pattern, the treads make picking up and handling the Prime very sure, I don't feel like I am going to drop it, and the extra girth makes the tablet easier to hold.
All ports, including the MicroSD port are accessible by prying up little rubber flaps. The flaps fit into molded tabs in the poly carbonate front piece. If I had to rate them on a scale of 1-10, 1 being very easy to lift and 10 being very difficult to accidentally dislodge, I'd say they are about a 4.
Also worth noting, you cannot use the KB dock with the Gumdrop case in place, and the front polycarbonate part of the case does interfere with your thumbs hitting the spacebar when typing on the soft KB with the device completely flat on a table or your lap. Elevate the upper edge of the device an inch or so and the problem goes away.
In terms of protection, I would have to rate the case, as very protective of the device, say 7.5 on a scale of 1-10. Everyone is different in their expectations, but I expect the case to add excellent impact protection and good casual splash protection. It's not going to add any structural strength to the Prime, but I feel the device itself is pretty rigid, so I don't worry much about that. With the protection comes a significant increase in girth and weight, and here is where I think some people will probably get heartburn. Again, this is a case of different expectations and purposes I travel a LOT on the job, I bought a 64Gb Prime because I wanted a Tegra3 Hotrod with a lot of storage to replace my laptop, MP3 player and Kindle. The fact that it's very thin and somewhat light, really didn't even come into consideration for me. If thin and light is a big consideration for you and you use your tablet in a fairly controlled environment then this case probably isn’t your cup of tea. If on the other hand, like me, you drag the thing all over the country, weekly, and use it everywhere from planes trains and automobiles, and are looking to add some heavy duty protection then the Gumdrop case is a great option, and I think right now it's the only option for the Prime. At $59 plus $7 shipping, the price of admission is pretty salty. But when you compare it to the cost of replacing your investment, then it starts to look a lot more reasonable.
Hope this is helpful to anyone considering one of these cases.

QBall16 said:
The Prime itself is no lightweight, and the Gumdrop case probably weighs half what the Prime does.
Click to expand...
Click to collapse
As 10" tablets go, I would disagree.

I would disagree as well for the weight of the Prime. Also, the BOX ITSELF has instructions on how to assemble the unit inside of the case. This case is SPECTACULAR for the price as it protects every aspect of your device. I, personally, have two cases, one business( a Roocase Folio) and then also I have the new version of the Gumdrop case for when I am out hiking(yes, I bring Optimus with me in to the woods) and when I am out having fun.
I have to agree that the cost of the case is worth protecting your investment.

IN-DEPTH REVIEW: Spigen Neo Hybrid vs. UAG vs. Otterbox Commuter vs Otterbox Defender

This is only my second time posting a review like this (first was last year for the Note 2), and would just like to take some time putting together a review that I hope will help some people make a decision if they are undecided between some of the available cases.
After scouring the internet back in December I narrowed my choices down to four potential cases. I wanted to give each a fair shake, so purchased all four and have been trying each one out since then - used each case for a full 7 to 10 days at a time over a 5+ week period.
Disclosure:
I will say that I am an individual who values a case that offers more than just minimal protection. Spending $800+ CDN for a phone each year, I want to maximize the likelihood that it will last without needing replacement - even though I am extremely careful.
With that said, I also really like portability and value the aesthetically pleasing appearance of a device with case.
My previous device from last year (Note 2) was fitted with an Otterbox Commuter first, but then I decided to opt for the OEM Samsung snap on case (lightweight, minimal protection) that sold for about $20 CDN.
Before I get into the cases, a bit about the screen protector...
I am a proponent of screen protectors (as long as it does not feel too tacky to the touch) and from day one settled on the Spigen GLAS.tR Slim Tempered Glass protector for the Note 3. Spent a good few hours comparing different options and after purchasing a handful of different protectors prior, was just not wowed by any of them so gave the GLAS.tR from Spigen a go, and wow was it amazing. It may be possible that other companies offer similar (if not identical) glass protectors, but I was happy with this one. It was $39.99 CDN, but I believe there are some of the more cost effective brands that have similar tempered glass protectors as well.
On to the cases...
1. Spigen Neo Hybrid -- $35 CDN
Black back and option of six different colours for the frame - gold, red, white, slate, yellow and silver. Images below show the silver frame.
The case itself comes as two pieces - a thin TPU layer that encases the sides and back of the phone, along with a plastic piece that snaps around the four sides to hold it firm against the phone. The assembly process is quite straightforward and simple to execute. The packaging instructs to slip the TPU around the phone first prior to snapping the plastic outer part, but I have found that you can just as easily leave the two pieces of the case assembled together and simply snap the phone in. Once in, the phone is fit quite snug.
The phone fit with this case is rather slim. It will fit in just about any pocket and slide in/out with ease due to the smooth plastic material.
Port cutouts are all fine. Pen is removed without any problems, and access to both charging and headphone ports may be reached without having to uncover.
Pressing the power and volume rocker buttons are done so on the plastic frame. No issues with how they felt.
In regards to handling, while it feels nice in the hand, it is rather slippery and does not offer any grip whatsoever.
In terms of protection, it does a really good job of encasing the device to ensure there are no exposed edges/surfaces and will protect it well from scratches and light bumps. As for any sort of impact, I would not put much trust in it. The plastic is very thin and the ring around the edges is just that - plastic. A drop from waist-height onto a hard surface would surely scuff up and leave noticeable marks/dents on that polycarbonate piece. If you are not worried about the potential of dropping your phone, this is a very sleek case that offers a visually appealing look. For those wanting a case they can be confident in getting them through normal everyday use and not worrying about at least minor falls, I would recommend looking elsewhere.
2. Urban Armor Gear (UAG) -- $35 CDN
Four colour options to choose from - Aero (blue), Navigator (white), Outland (orange) and Scout (black). Images show Navigator white.
This case is one-piece, although it is apparently designed as a 'fused hard outer with soft impact resistant core' design as per the UAG website product description. The inner layer is not really all that soft though. I would say it is more like a single-layer construction style case. Installation of the case is very simple. The phone snaps right in, and is very snug - even more so than the Spigen Neo Hybrid. So one should not ever worry about the phone inadvertently coming out of the case - I would go so far as to say even upon impact. Something I liked about the design of the back was that the grooves provide for some grip with holding with one hand. Without this, the plastic back would not offer much grip to hold on to.
In terms of size, the case does not add very much bulk to the phone. Yes, it is a bit larger in both width and height compared to the Neo Hybrid, but still not a bulky case whatsoever.
Access to all ports done so with ease. There was an issue with the initial batch of these cases being released without the temperature and humidity sensor hole cutout. UAG offered to replace these for customers who did not have it on theirs, and apparently is no longer a problem with the current cases sold. The pen is removed easily and the camera cutout is adequate.
The buttons press fine, however they do have a somewhat hard 'plastic' feel to them when depressed. It does not pose a problem when pressing, but just a minor comment about the overall feel that felt different from the smoothness of pressing on the two Otterbox cases.
As for protection, this case sure looks pretty rugged from the back. It covers the phone well to prevent scratches and scuffs. I would say that the phone would be fine if dropped from waist-height, but a 'hard' drop may still leave the phone susceptible to some direct impact since the case itself is rather rigid.
Compared to the Spigen Neo Hybrid, the UAG no doubt offers much more protection. This just comes at the cost of it being very slightly thicker, wider and higher in dimension.
3. Otterbox Commuter -- $45 CDN
Comes in Black, Glacier (grey inner rubber, white outer plastic), Surf (dark blue inner, light blue outer), Merlot (purple inner, white-ish outer), Lily (purple inner, teal outer) and Berry (purple inner, red-ish outer). Gracier is shown in images.
This is a two-piece case that has a rubber inner layer around the phone and encased by a hard plastic outer shell that holds the rubber firm. Assembly is simple - once rubber layer is wrapped around the phone, slide either top or bottom edge against the plastic and press the opposite edge down so snaps snug in place. Once done, you may also need to lift open and close the headphone and charging port covers to ensure they are seated properly within the plastic shell.
Compared to the Note 2 Otterbox Commuter this one has a nicer feel to it. The rubber is held together very snug against the phone by the outer plastic, so there is no feeling of flimsy rubber as was the case with previous models. Because the back is plastic, it will slide in/out of a pocket rather well. As a result, it is however somewhat slippery in hand - but nowhere near as slippery as the Neo Hybrid. The rubber inner layer is exposed on the two upper and two bottom outer edges. This helps in adding the grip of the phone. The front facing lip of the rubber layer comes up past the plastic edges and also offers additional grip - this is something that stood out compared to the Neo Hybrid and UAG that I have to say made a big difference.
As mentioned, the headphone and charging ports are covered by a flap from the rubber layer. These are opened/closed easily. Removal of the pen is similar in ease as the UAG - the Neo hybrid was the narrowest of the three in terms of width of opening.
The volume rocker and power button feel very smooth, compared to the harder plastic feel of the UAG.
In terms of protection, this would offer much more impact protection than the UAG, and even more over the Neo Hybrid. I would feel confident in dropping the phone 6-feet in height onto hard surface anticipating only minor scuff damage to the plastic case. The front edge rubber lip comes up much higher above the screen than either of the Neo Hybrid or UAG edges - extra 1.5 to 2mm from the screen vs. those two.
All around, this has the most protection and the 'best feel' of the three so far. Very solid feel in hand.
4. Otterbox Defender -- $60 CDN
Just like the Commuter, this comes in Black, Glacier, Surf, Merlot, Lily and Berry colour combinations, as well as Blaze (black inner with orange and realtree graphic on back). Images show Glacier.
This is also a two-piece case, but compared to the Commuter (rubber inner & plastic outer) the Defender has a hard plastic inner with soft rubber outer layer. Assembly of this one is straightforward, however disassembly may be a bit difficult as the plastic clasps must be pressed in (to the phone) to release them. It is a snug fit, so it can be tricky until you get the hang of it. In addition, it also comes with a plastic screen protector built in to the plastic case layer. Compared to the Commuter, the rubber at the bottom edge also comes up to cover/protect the home button. Also, this case comes with a hard plastic belt clip/holster. I would probably not use it everyday, but I can see it being useful for people who are in environments that may benefit from the extra protection. With the screen facing down in the holster, it really feels safe and secure.
This case is the biggest of the four, however it was surprisingly quite compact when I first saw it. They redesigned it compared to how it was for the Note 2. Yes, it is thicker than the Commuter still, but just a little bit. It is a bit wider than the Commuter - maybe 2mm or so. Despite it's thicker dimensions, it still fits fine in most pockets - even slim jeans. Because the outer layer is rubber, it will not slide in/out as well as the other three though. On the plus side, the outer rubber layer is probably one of the most outstanding features of all the cases that surprised me. The enhanced grip it offers is absolutely amazing.
The built in screen protector is something that I did not like though. It feels OK and does sit rather well on the device's screen, but it's still not the same as an actual screen protector applied onto the device itself. After using the Defender and built in screen protector with the GLAS.tR for 3 days, I opted to remove/pop it out. So now I just have the tempered glass screen protector which feels way smoother and less affected by smudges.
The headphone and charging ports are protected by thicker feeling tabs compared to the Commuter. The opening for the pen actually feels just a hair-bit tighter than that of the Commuter's. From the looks of it, I am thinking this is because of how thick the rubber is around that corner.
The volume rocker and power buttons depress smooth and fine - pretty much identical to that of the Commuter's.
I am sure it is no surprise to anyone that the Defender offers way more protection than any of the three other cases. Even if the tactile rubber grip somehow fails your grasps, the impact protection this offers is second to none. I would probably feel confident in this phone dropping from two levels up onto hard surface.
Using this case everyday may not be for everyone though. Yes, it can fit in the pockets of slim jeans, but it may not be the silhouette one may want in their outfit. Sure, you could use the belt holster, but again, not everyone may want that look either.
I was very surprised how comfortable I felt by the end of the week of using the Defender. On the first couple days, it seemed like I was making an extra effort to carry it around. After the week, I could see myself really getting used to it.
Comparison Images
For all those who want to see the cases next to each other for dimension comparison purposes here they are...
OVERALL OPINION
There really is no 'best case for everyone'. It comes down to what you want and individual lifestyles and preferences. With that said, you need to determine how much protection you would like from a case.
I will say that of the four cases, the Otterbox Commuter comes out as the winner for me. It offers the most protection hands down with minimal bulk (although the defender is a close second). The UAG is a nice looking case from the back, but aside from that and the grooves for grip on the plastic back, there is not much special about it. Take into account the extra grip you get from the Commuter, and even more from the Defender, and they trump the UAG in that regard easily. The Neo Hybrid was disappointing for me as it not only did not offer much protection, it was also difficult to handle with its smooth-texture surface.
I do not regret having bought all four cases though - it's the price I'd gladly pay to ensure I find one that meets my expectations. The Commuter is now my everyday case, with the Defender being the one I change to here and there just to have a different look when I want to change things up. Even with slim pockets, the Commuter is still my choice over the slightly slimmer Neo Hybrid and UAG cases.
***************
I want to thank everyone who has reviewed a case for the Note 3. It had likely played a part in my decision making and am appreciative of the effort and time put in.
cheers,
Matt

Great reviews and thank you for taking the time & money to do this. I agree with you completely on the spigen neo hybrid review, tho it does look nice it has no grip and is more of a "for looks" type of case. Im rockin the ZL otterbox defender-lookalike case and it does a good enough job for me. I especially like the case since it provides for future modifications like extra room for microsd 2 sd card integration so you have your long lasting battery life, great protection and goliath like storage expansion
Sent from my SM-N900T using xda premium

I think the neo would protect from a small drop from waist height or something like that. The case would definitely not survive fully intact though the phone may well do. Not game to try it.
The UAG does stand up to drops quite well. It saved my Note 2 a couple of times, not only saving the phone but also with minimal scuffing to the case itself.
Even though I'm happy with the UAG, I'm tempted to try a commuter on the basis of this review. A bit more grip and port covers is certainly a tempting proposition.
Sent from my SM-N9005 using Tapatalk

I switch between UAG and Trident Cyclops. Both of them offer excellent protection ?
Sent from my Galaxy Note 3 ?

Thanks for the excellent review! I currently have a black Otterbox commuter and find the case to be nearly perfect in every aspect. I recently ordered a Spigen neo Hybrid in dante red just to change things up a bit and for a sleeker look.

Great stuff here, thanks for the great review. I have the UAG and love it, but am looking for a protective case with a better feel. After reading this, I'm eyeballing the Commuter as well.
Sent from my SM-N900V using XDA Premium 4 mobile app

Def a great review. Been checking out the commuter and UAG cases and definitely leaning towards the commuter now.
Sent from the big ol' Note 3

Haha I wish a review like this was posted before I went out and bought these cases myself. I have the Neo-Hyrbid, two UAGs (one is a replacement for the missing hole) and a Defender, in the exact same colors as reviewed.
I have to say that this is an great review and all of mattt33's review points are spot on. Of the three that I have, the Defender is my favorite for its protection, excellent grip and long-term holding comfort because of the soft outer shell. Comfort is very important to me because I do a good amount of gaming and media watching on my device. My only gripe about the Defender really has to do with the color choice. Anything other than black is going to show dirtiness after a while.
The Commuter does look great though, but I think I would miss the grip and soft-yet-solid feel of the Defender. I'd give it a try, but I'd never hear the end of it from my wife if she stumbled upon yet another case in the mail.

Completely different cases to compare. I have the neo hybrid, and also the uag, and the slim armor. I'd have to say I Love all of them for different reasons. But I usually use the slim armor. It just feels nice looks nice.

Guess where I landed right after ordering a Dante Red Spigen Neo Hybrid. !
Lol., It was merely a decision based on the looks. Didn't drop my Phone since the first day. So hope it will work out for me as i don't have an option to cancel or change the order.
Thanks for the review mate!

Great review. I actually own all of the Neo Hybrid colors. I am usually good with not droppinhg my phones. I like the look of them and am not bothered by the grip.
---------- Post added at 12:54 AM ---------- Previous post was at 12:50 AM ----------
JazonX said:
Guess where I landed right after ordering a Dante Red Spigen Neo Hybrid. !
Lol., It was merely a decision based on the looks. Didn't drop my Phone since the first day. So hope it will work out for me as i don't have an option to cancel or change the order.
Thanks for the review mate!
Click to expand...
Click to collapse
How has the case worked out for you?

I love Spigen Neo Hybrid but for me all cases in general makes the Note too big... Good review!

conamundas said:
Great review. I actually own all of the Neo Hybrid colors. I am usually good with not droppinhg my phones. I like the look of them and am not bothered by the grip.
---------- Post added at 12:54 AM ---------- Previous post was at 12:50 AM ----------
How has the case worked out for you?
Click to expand...
Click to collapse
Extremely Happy!
Only the original samsung Micro USB 2.0 Cable will fit when the case is on. Opening for the USB port on SPIGEN is small, so 3.0 cables will be unusable.

I love the look and feel of my Spigen Slim Armor case. It also protects fairly well from drops.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

Details about Commuter
Wonderful review. After endless hours of research on cases, I thought I had narrowed my choices down to Trident AMS Kraken (since it had a kickstand as well) and the Ballistic Tough Jacket Maxx but this review completely changed my perspective. As such I am now highly considering the Otterbox Commuter. Although I prefer a kickstand, protection supersedes it. I just have a few questions for those who have used or have this case.
1) Are there any overall issues or concerns any of you that have or had the case?
2) Ease of access to the ports (i.e. being able to charge the phone?; being able to plug the 3.5mm earphone jacks in?)
3) Any concerns as far as rubber expanding (when phone heats up), not sitting tightly in place?
4) Any issues in conjunction with the use of a glass screen protector? I know the OP has one but the review was only for a week after, I'm concerned about longterm effect such as if its too tight bubbles may start to form.
5) The lip on the front side is much higher than the other cases. Does that affect the usability of the phone or cause any other problems?
Sorry for the numerous questions but finding the right case is imperative as I'll have this for 2 years.

snapper11 said:
1) Are there any overall issues or concerns any of you that have or had the case?
2) Ease of access to the ports (i.e. being able to charge the phone?; being able to plug the 3.5mm earphone jacks in?)
3) Any concerns as far as rubber expanding (when phone heats up), not sitting tightly in place?
4) Any issues in conjunction with the use of a glass screen protector? I know the OP has one but the review was only for a week after, I'm concerned about longterm effect such as if its too tight bubbles may start to form.
5) The lip on the front side is much higher than the other cases. Does that affect the usability of the phone or cause any other problems?
Click to expand...
Click to collapse
I have the Otterbox Defender, rather than the Commuter, but I believe they're similar enough for my answers to be helpful....
1) No overall issues or concerns from me.
2) I've had cases for other phones where the rubber flaps covering the ports were more of a nuisance than anything, and I ended up cutting them off. On this case though, they really don't get in the way, and they do wonders for keeping dirt and debris out. The cover over the charging port closes nice and tight, but is opened easily enough with one finger and some slight pressure (or a fingernail. It also opens far enough that the rubber isn't putting unnecessary pressure on the USB cable or the port when plugged in. The cover on the headphone jack also closes up good and tight, but is slightly more difficult to open, at least for me. Normal 3.5mm plugs fit in just fine, and as with the charging port cover, the rubber doesn't put any unnecessary or damaging stress on cables, when plugged in. I've only had an issue with one 3.5mm to RCA cable, that had a slightly wider rubber base than most, which required taking off the entire case to plug in, but I think that's due to it just being an old, cheap cable.
3) No problems with the rubber, even when left in the car in 100 degree plus Southwestern heat. It fits as snugly as it did when I bought it.
4) I use an iLoome 9h tempered glass screen protector. I cut the plastic one that is built into the Defender out with a razor, and a little over 6 months later, it still looks immaculate. No bubbles, peeling, or sliding. You honestly can't even tell there's a screen protector there, it's that nice. The added depth of the glass protector makes it a little harder to snap the 2 plastic halves of the case together, and I have accidentally broken 2 of the plastic tabs, but it still closes just fine without those 2, and to be frank, they were only broken due to carelessness on my part.
5) Don't quote me, but I think the lip on the Defender is slightly deeper than on the Commuter, and it hasn't caused me any problems. In fact, it does wonders for protecting the screen when placed face down. If you regularly use the Touchwiz feature that lets you take a screenshot by sliding the side of your hand across the screen, it makes doing so a little difficult in portrait orientation, but that's really just nitpicking.
Hope you find some of this helpful!
:beer:
Sent from my SM-N900T using XDA Premium 4 mobile app

lol.... Read threads for a few days... Ordered a Spigen NEO (on spiffy looks), but after reading more threads, Friday, I ordered another Commuter. Which I've had on all my phones (since like the Blackberry days), as well as some Defenders.. I just wanted to spice it up, and the Note 3 is so nice looking I was trying not to wrap it in Otterskin...
Eh well, I'll use the Spigen for dressing up, lol..
Thanks!

The thing I don't like about the Commuter is that the back is very slippery and slides around easily when placed on it's back. I have a compartment under the radio in my car and cannot put the phone in there with the screen up. When I accelerate like I usually do the phone slides right out, I had to place a piece of rubber type material in there to keep it from coming out.

very nice i will buy one

Exact Slate case review and pictures (good value for $15)

This is the case that I've been using for the past month, and for the price it sells for ($15), I am very satifisfied. It's called the Slate Series from Exact Cases. Haven't read much about their cases, but I like what I see so far!
What we have here is a folio type case with a textured pleather exterior, and microfiber material lining the inside of the case. The outside has a grippy, almost rubbery texture, and one thing is that it does get dusty easily, but nothing that a quick wipe of the cloth can't handle. The cover has a solid feel, slim enough to remain portable, but just thick enough to provide some screen protection in your laptop bag.
The main draw of the case is the great array of stand options. First off, the edge of the back shell has a nub which can sit on the three grooves on the inside of the cover, giving three quick stand angle for viewing the 12 inch display. For a more straight up viewing angle, I prefer using the other stand option by folding the cover back and tucking it behind the back shell. This stand is very sturdy and makes watching movies an absolute joy on the 12.2. This would also work as the typing stand by laying it down. The Sleep and Wake feature works as well, another perk.
But again, I just wanted to espouse on the quality you get for the money. Fully featured with a great feel in hand, At $15 with free shipping, this case does all I can ask for at its price. Take a long at my pictures in the link below (too large to link).
Gallery: http://imgur.com/a/hejdh#0
http://www.amazon.com/Exact-Series-Multi-Stand-Samsung-NotePRO/dp/B00IRLEJZQ

Amazon Top Rated Case : Otterbox ,UGA ,Speck and more

Hi , There .
My name is Ben Hoffman , if you are familian with A C forum you will know i am the formed Admin and i was quite good at accessories.
I just joined this forum a couple days ago . So here we go , let us talk about cases
1 Famous UAG Case
This is my fifth Urban Armor Gear case, and they only keep getting better with each iteration. I first discovered them for my Galaxy S3, and was very impressed with the style, durability, and quality. Once I got my S7, I immediately blind purchased this case with confidence based on my previous experiences.
First of all, I really love how they have expanded the color selection. I usually have gotten the plain black versions, but this time I got the translucent red-black 'magma' case because it just looked so cool. And once I got it and saw it in person on my phone, I was not disappointed. I uploaded several photos of my case on and off my phone so you can judge for yourself, but I *really* love how this case looks and feels.
The case fits perfectly on my S7, and is precision cut to perfectly align with all necessary inputs and openings: audio jack, mic, speaker, camera, LED, volume & power buttons, and so on.
The main material on the back is glossy and slick, but the black parts around the edges, corners, and buttons, are a nice rubbery material that grips well and makes me much less worried about my phone slipping out of my hand since it is quite slippery case-less.
One area I'm always happy to see improvements with is the physical footprint of this case. My first one looked cool but did add significant bulk. This one has improved the design to stay very protective and stylish but without adding quite as much bulk as before. Any case worth buying will add some width to your phone, but this one strikes a good balance between size and protection.
The only thing I'm not looking forward to is seeing the case do its job and absorb scratches, spills, falls, and wear & tear because it just looks so nice out of the box. But better on a replaceable case than directly on your expensive phone.
I do miss when UAG used to include screen protectors with their cases. I hope they decide to reintroduce that again in the future given the relatively higher price. I was always very happy with the cut and quality of their included screen protectors, but sadly this one does not include one.
* Summary *
Pros:
[+] Very durable and protective, none of my UAG-protected phones have failed to survive scrapes, scuffs, and falls
[+] Precision cut to allow access to all ports, inputs, and buttons
[+] Fits phone like a glove, without adding a massive amount of bulk
[+] Great material and very happy with the grip of the rubbery corners, edges, and buttons
[+] Great brand with a history of quality and good customer support
[+] Opinion, but I seriously think these are the best-looking and stylish Galaxy cases currently on the market
Cons:
[-] UAG no longer includes screen protectors like they used to
[-] One of the pricier lines of cases on the market
Other:[*] I wish they had a couple more color options so I could get my wife more interested in this case - previous iterations offered a pink variety.
Link http://www.amazon.com/Samsung-Galax...ie=UTF8&qid=1462657422&sr=1-3&keywords=uag+s7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

2nd Clear SLIM HEAVY DUTY SPECK CASE
My wife and I are split on this one. But I don't want to imply either one of us really likes the case; just that I dislike it much more than she does.
On the plus side, Speck makes nice products; I have had & continue to have them on my Mac laptops. So I'm not criticizing Speck quality. But quality doesn't necessarily translate into value or function....
At $27.99 (Amazon price at the time of this review) I don't see the value. I know Speck (on both the Amazon product page and in literature included with the Vine sample) goes to great lengths to tell the potential buyer/reviewer that there is more to this case than meets the eye. Maybe so, but (pardon the pun) I just don't see it. I'm certainly not going to drop my brand-new S7 to see if it really is "mil-grade," but if it is it certainly doesn't seem any more "mil grade" than other cases I have used (and were at cheaper price points). I wonder if "mil grade" is sort of an advertising "come-on" like "organic"; sounds great but could mean just about anything (not only do I know that from personal experience (30 years in the Army), but take a look at this comment from the Wikipedia article: "Because no commercial organization or agency certifies compliance, commercial vendors can create the test methods or approaches to fit their product"). I'm not accusing Speck of anything; only saying that "mil grade" sounds good, but might not mean anything.
As to function, both my wife and I found that it was much tougher to operate the side buttons (2 on left, 1 on right) than it was using two other cases we've bought and are playing around with. It's so tough as to be annoying. The included literature makes the point that the slim profile makes it easy to slide in and out of pockets. True, but we also found the acrylic pretty slippery too; which I guess on one hand is a good thing (helps getting phone in/out of pocket), but also a real danger (so slippery that we might find ourselves testing the case's impact resistance sooner and more frequently than we thought we would).
I also thought the case was a fingerprint magnet. We washed our hands prior to using the case and within minutes the case showed smudges, fingerprints, etc. True, we might be able to see the beauty of the phone through the case, but it really looks bad when there are so many smudges, etc.
Finally, an acquaintance had a version of this case (one generation back for an iPhone). Didn't like it as "it completely fell apart within a few months." So unless there have been significant improvements over their cases of less than a generation ago, I'm not sure that this case is something I can recommend.
I wanted to go 1-2 stars while my wife felt it was a 3-star case at best. So we essentially split the difference. In the end, I really don't feel like the case warrants the asking price, nor do I feel it performs better (or even as well) as some of the other cases we're using and/or looked at ( Slim Transparent Clear Case for S7 or Galaxy Note 5 Case, Verus [High Pro Shield][Crimson Red] - [Military Grade Protection][Slim Fit] For Samsung Note 5 (yes, I know it's for a Note 5, but I have it on my Note and am hoping it will also come available for the S7; I suggested it because Verus claims "mil grade" for this case) ($15.99), or the OtterBox COMMUTER SERIES Case for Samsung Galaxy S7 - Frustration-Free Packaging - BLACK ($31.99)).
I’m not going to use it (already off the phone and looking for a new home). So if I’m not going to use it I don’t feel comfortable recommending it to others. To each his/her own I guess, so I’m sure this case has its fans. I’m just not one of them. Sorry.

3rd Slim Clear Transparent Case for Samsung S7
This is my 23rd case so far for my S7 (I like to change it up!), and so far the most durable/protective and best fitting one I have tried yet.Also it can show off your S7 with Transparent Back
The phone fits into the case very tightly, almost to the point where you can start to feel like it's not going to fit, but then you get it fully snapped in. The back is crystal clear and smooth, and has a good thickness to it -- not cheap or flimsy. I feel like this offers excellent protection against back side drops. The camera is recessed decently as well, which should keep it protected.
The sides are a more rigid plastic material that sits on top of the clear TPU material. Double protection is always welcome. I'm not sure that the rigidity will hold up to multiple drops -- but I'd rather the case take a hit than my phone, so again I feel safe in this case with side drops. The buttons (volume up/down and power) have cutouts so the clear TPU material is seen and used to press in. They fit perfectly and are very responsive.
The front of the case gives you a clear TPU raised border around the screen, so if sitting flat on a table, the screen will be raised up a bit off the table. This would protect again some screen-down drops, as long as the surface is flat without other object sitting on it that could poke the screen. This is as protective as cases get -- you'd want to get a screen protector of some sort to really protect your screen.
Overall, I'm really happy with the look and feel of this case. It doesn't look cheap, and feels solid and sturdy in the hand. I'm definitely a fan.
I was given a discount on the purchase of this product, but my review is based on the regular price of the item. This is a solid case that shows off your phone through the clear back, but gives it some style with the colored edges and trim. The gold color is very light, almost a cross between silver and gold, and doesn't look cheap. This is a fantastic case for the price!
$15.98 at amazon http://www.amazon.com/Artech-21-Scr...6&sr=8-3&keywords=artech+21+clear+case+for+s7
Use Artech21 ,get 20% off

3rd Easy grip slim cover
Lets consider this review tentative based on the release of the device. Seeing as how the phone isn't released yet, I can't really speak for how perfectly it might fit, etc. So with that being said, let me review this case based solely on material and design.
Typically with sleek cases, the level of protection is often compromised. For example, Otterbox cases are probably one of the best in terms of protection, but they are extremely thick in size and does not necessarily scream "fashion" to anyone. This Artech 21 case is as beautiful in person as seen in the renders. The cut-outs are created with extreme precision, and the gunmetal has a slight bit of gloss to demonstrate its elegance.
Pro:
- I've used previous Artech 21 cases. You can expect the cases to feel strong and well built.
- Dual material design. A soft but sturdy TPU cushion, and hard plastic frame. The TPU will handle the impact well but the plastic frame helps the case feel solid and strong.
- Thick enough without adding too much bulk.
- PRICE. I've owned a lot cases, some bought from carrier stores, and many from Amazon. You wont find case quality like this at this price from most sellers. PERIOD.
Con
- The design isn't for me. While I'm sure the ridged design will add grip to the already slippery glass on the S7, I would have liked it to be a smooth finish on the back.
Amazon : http://www.amazon.com/Artech-21-Sho...=1462658433&sr=8-25&keywords=slim+case+for+s7
15.99 dollars, artech21 can have your 20% off

4 Otterbox and Little Rock comparison
This case comes as a 2 piece clamshell, top part containing the built in screen protector and the bottom having a rigid back and flexible sides that secure it to the top piece. The top half is a secured in place screen protector made of a clear and rigid plastic sheet with a cutout for the action button. The phone is snapped into this portion first where it makes a snug and secure fitment. The bottom half is thicker and possesses the bulk of the padding, seen in the honeycomb ridges and thick sidewalls. This half receives the top where it snugs into the flexible sidewalls.
The power and headphone jacks are covered with flaps, speaker and the volume and power buttons are firm but still responsive. The sides of the case are beveled above and below and are textured with a crosshatch design which makes it easy to pick up from a flat surface and have a secure grip. The rear of the case is branded with the company logo and an industrial design. The area around the camera is not very beveled which provides poor access to the Heart Rate Monitor. In testing with 2 OEM and one branded wireless Qi charger pads, the phone charged fine and no undue heat was detected.
In comparing this product with a direct competitor and king of the hill, Otterbox Defender, a few differences stand out. While both items have similar port cover designs, the hinge side on the Otterbox is to the front of the case where the silicone has the greatest flexibility and the Little Rock case is hinged toward the rear of the case where the silicone has greater stability. In my opinion the silicone on the Artech case will not stretch out around the port covers as easily as the Otterbox could. The Otterbox has a more accessible design around the Heart Rate Monitor than the Artech case does. The shape and texture of the silicone on the Artech case makes it appear slimmer and feel more secure than the Defender.
The biggest negative to the Artech case in my opinion in comparison to the Otterbox case; is the lack of a holster. A device this size in a thick case isn’t as convenient in a pocket. This is a personal preference however, I know many people that do not use a holster. It would be nice if a holster for the Artech was available as an add-on item.
The greatest perk to the Artech case is it is 25% of the price of the Otterbox. A second or third one could be purchased as a backups and still come out under the cost of one Defender.
Link for Otterbox S7 defnder case :
http://www.amazon.com/OtterBox-DEFE...eywords=otterbox+defender+case+for+samsung+s7 $42
Little Rock http://www.amazon.com/Artech-21-Mil...64&sr=8-3&keywords=rugged+case+for+samsung+s7 19.99 dollars

Spigen Neo Hybrid Case
Nice case, but too slippery for one-handed use
1) Sufficiently protect the phone from accidental drops.
2) Not be too slippery so that I can easily pick it up, hold it, and use it one-handed.
3) Have a headphone jack opening big enough for my Etymotic ER4P headphones.
4) Slim so that it's pocket-able and easy to hold.
5) No outlandish designs and colors.
This case meets requirements 1, 4, and 5 but unfortunately fell short for 2 and 3.
Here are my thoughts on how this case met or didn't meet my requirements:
1) While I didn't actually drop my phone to test this, the case seems well-made so that it would protect the phone in most situations. I worry about a face-down drop since I've cracked screens twice like that, but this is probably a concern with most cases anyway.
2) The Polycarbonate frame gives the case a nice look, but unfortunately it makes the case too slick for my preference. This, combined with the relatively slick TPU (Thermoplastic Polyurethane) that surrounds the phone, makes me want to stop using this case. If I remove the polycarbonate frame, then I can grab the case much better on the sides and back, but then I lose the added protection that the TPU provides. I have been using the case without the frame lately because I just don't feel comfortable holding the phone with it on.
3) Because I listen to music so often on my phone, it's essential that I can use my good set of headphones with whatever case I have on my phone. Because the Etymotic ER4P headphones have a slightly bulkier rounded connector, I can't plug them into the phone while the polycarbonate frame is on the case. I can plug them in when only the TPU is around the phone, but the clearance around the frame just isn't enough to allow the connector to plug in. This case is probably designed for the standard, basic headphones that come with the phone, but it doesn't work for me.
4) I really like the slimness of this case because it hardly adds any bulk to the phone. Because the Galaxy S7's width is already the max for my own preference, a slim case that doesn't add much additional width is important to me.
5) When deciding on cases I typically look for basic, black or dark-colored designs that aren't too flashy. I am not a fan of the reflective/shiny lines that run horizontally across the top and bottom of the TPU, and I would have preferred a black frame, but overall the subdued style meets my needs.
Conclusion: The case’s slippery feel and inability to accommodate my headphones serve as deal-breakers for me. I can make this case work without the frame if necessary, but it's just not ideal for me. The search continues. If anyone has better recommendations on which cases meet my requirements, I'm all ears!

Otterbox Symmetery Case
I purchased the otterbox symmetry case in Eden teal. I wanted the floral pond design but it never seems to be in stock. The design on Eden teal is very cute. It reminds me somewhat of lilly Pulitzer or Vera Bradley designs. The case itself is fairly lightweight and a one piece construction. It Is hard plastic with a rubber lining and seal around the face.
The rubber lining around the face has a raised beveled edge. I'm not sure what the purpose of this is, but I do know it attracts dirt like crazy. Just a few moments in the pocket of my black pants and it picked up the color. It will probably continue to get dirty with use, but maybe regular wiping down with some alcohol or cleaner will help. It somewhat did today after I noticed the dye transfer. Also, the rubber seal has a little play.
The buttons are very firm but I hope they'll break in eventually. It's a little difficult to reach the mute switch, and I have very petite fingers. If you have large fingers, good luck!
I think it's pretty easy to get this case on and off. I didn't feel like I was gonna break my phone in two trying to get it off like my Speck Candyshell case.
I have a tempered glass screen protector on my phone and this case JUST BARELY clears it on the sides. It has plenty of room at the top and bottom.
I haven't dropped my phone yet to attest its protection. Then again, I really don't want to find out. Lol
I don't think this case was worth $40. Just seems a little steep for what it is. $25 is more reasonable. But hey, you pay for the name.
Overall, it's an okay case that hopefully provides more protection than you average run-of-the-mill snap on case.

Brief Review for Lazer S7 case
This is a great phone case for protection. It also look rugged which is a plus. There is a variety of colors so this case can suit anyone.The gunmetal/black looks great on the s7 , and this is the type of case you'd want to be sporting if you dropped your phone. The corners feel super rugged so it has nice corner protection. Heres a list of some pros and cons as to why you might or might not want the case.
PROS:
- super sturdy
- slim profile compared to other protection cases. (this is also a 2 part case)
- protects your camera from surface scratchs
- buttons are very tactile and responsive
- doesnt attract fingerprints
- corners seem super rugged
- the sides have dotted texture so you can get a better grip .
- on the back, the case itself has elevated lips so even your case wouldnt get that scratched up.
- no ridiculous labeling
CONS:
- this isnt much of a problem, but the volumes arent elevated. it might bother some people, so definitely keep this in mind.
Overall, I recommend this case to anyone who is looking for a sturdy case to provide your s7 with protection. Most cases that provide this much protection is super thick, but this case has a slim profile which is a huge benefactor. If you want a slim case to protect your phone look into getting this one!
Link at amazon http://www.amazon.com/Artech-21-Sho...&qid=1462658917&sr=8-26&keywords=slim+s7+case
15.98 dollars , use coupon artech21 get extra 20% off

Obliq Case
I still agree with the overall sentiment that the protection and size, the two most important characteristics of a phone case in my opinion, is a perfect balance. I would also retract that speaker distortion criticism, I think it may have been a placebo because I can't tell a difference between the two anymore.
However, I've found the lack of grip problematic; though it's less slippery than the phone itself, I think ridges on the side of any phone case is a necessity, or at least some sort of sticky texture; the case is much too smooth, and I feel like it's more prone to slip out of my hand than a case like the Speck CandyShell Grip (a fine case, but I prefer the aesthetics and strength of this case). Also, I found that the buttons are slightly harder to press than I originally thought, and the lack of tactile feedback (compared to the plain phone) is disappointing. For those two reasons, I've changed my review from 5 stars to 4 stars. All other previous pros and cons have remained the same.
Pros:
- I intentionally dropped my phone a few times (with the case on) from waist and torso height onto hardwood floor to stimulate an actual accidental drop. Phone was fine, case didn't receive any visible scratches.
- Because the phone fits well into the case and the lip covers the glass front, the touchscreen did not receive any scratches either. I also love the lip because when using the phone without the case, parts of my hand would get read by the touchscreen, so scrolling webpages with just one hand wouldn't be smooth; now, only my thumb will touch the screen.
- It's easy to put in and remove the phone from the case.
- The case only adds a few millimeters in thickness, so it's not too bulky in pockets. I think it's the right amount of thickness for comfort and protection.
- I like the sleek design of the case and its minimalism, but this is totally subjective. I also like the subtle logo instead of a big ugly logo. Absolutely no trouble with charging or headphone jack.
Cons:
- The buttons aren't too hard to press, but they don't give the same satisfying click that you get from the phone without a case.
- Though the case doesn't have any ridges or sticky/rubbery material, it eliminates some of the slipperiness of the phone, making it easier to hold and use with one hand compared to just the phone itself. However, you sacrifice some grip with the sleek design; I'd prefer ridges on the sides so it's even easier to hold with one hand.
- Speaker is ever so slightly muffled/distorted compared to no case (after a couple times comparing music with and without the case, I noticed a very tiny amount of distortion).
Normally I'd recommend being wary of some of the early reviews because some to many of the reviews were paid for, but I actually really like the product, and I wasn't compensated in any way. I will try to update this review after a week, after a few months, and at least a year following this first initial review to let you know how the case holds up over time.

Case Mate Glitter Case for my wife
I have a few complaints about this phone. I have the Samsung Galaxy S7 and yes, it's an amazing phone but has some quirks about the sensitivity of the edge. So if you are texting with your thumbs and your palm hits the edge you can easily erase words or hit the enter button...not a deal breaker, just something to be aware of.
Therefore, it is really important to get a case that has a bit of a edge that stands out from the phone so your palms aren't able to touch the screen when you type. I excitedly bought this case without realizing the quirk about the phone but after a few days of using it, the edges don't stand out enough from the phone so I have a lot of trouble texting when this phone case is on.
Secondly, the glue that keeps the jewels on is potent and will leave a smell on your hands. I thought it would mellow out but it has not and has remained just as strong smelling as the day I got it.
Thirdly, the phone case is weighty and there is no grip! So, it will slip and slide around in your hands and the extra weight is noticeable after texting or writing an email...my hands actually started to ache from holding this for too long due to the extra weight. It is also bulky so your nice thin, lightweight phone now turns thick and heavy and it is noticeable especially in a sweatshirt pocket, in your purse or in your pants pocket.
Lastly, an odd complaint is that it picks up every little hair and piece of lint...they will stick up off the back of the phone. So anytime you put in your pocket or in your sweatshirt pocket, it comes out with little hairs sticking up all over the back of it. Plus I have cats and even their hair gets stuck in it. I am constantly picking them off! Super annoying! The back isn't' a smooth texture at all...it's pretty rough and not that comfortable to hold in your hands and it catches on everything.
Overall, I am just not pleased. I looked at other reviews from other phone models that use the same case like the iphone 6 etc and there are many negative reviews stating that if you drop the phone, the case isn't sturdy and your phone will break. This is just not a chance I am willing to take on such an expensive phone. I am returning this after giving it a fair shot. I have found the Speck case to be wonderful and just what I need. Is it as glitzy? Not at all but it is lightweight, thin, good grips on the side so it won't fall out of my hand and a good edge that stands away from the phone edge so my palms don't touch the side of the phone when texting. I would highly recommend that case over this one. The design of this case is beautiful but it only goes skin deep...there are too many other flaws that outweigh how pretty it is. Be warned!

Spigen® [Tough Armor]
First of all, I am pretty excited to get my hands on this specific model of the Spigen line. I have used Spigen's Slim Armor case ever since the LG G2 from a few years ago. I simply love the protection I can get with no real added bulkiness, and the idea that you can change out the hard outer shell for a totally different color to suit your mood for whichever day of the week it is.
If you have seen my review of the Spigen Slim Armor series, then you already have a slight idea of the technology behind this 'air cushion' design. The corners are designed to have what appears to be air added in between the rubber, allowing for a softer impact if you ever drop the device. The case comes in a few different pieces. First of all, you have the outer shell, which is a hard plastic. You might think that the Slim Armor series is a hard plastic, but the Tough Armor series actually does not bend like the Slim Armor does. This part, unfortunately, does scratch in time. I went ahead and took the liberty to scratch it with my keys, because often times I may have a few coins and perhaps my keys in my pocket. I did purposely carve my keys into my case, which hopefully you will not do under normal circumstances. The second part is the rubber or TPU inside, which gives it a very soft feeling to not scratch the phone as it sits inside the case. This inner shell is the majority of where your hand actually touches. It surrounds much of the sides, top, and bottom. If you have ever used the old school HTC phones, this is the exact type of TPU that prevents finger prints and gives it a really firm grip when you are holding the phone. The S7 is a very slippery phone without a case, which I am sure you know if you are looking for a case! This removes any worries that I truly have. Another difference between this and the Slim Armor is that there is no kickstand. After trying the Slim Armor, I do like the kickstand feature. Unfortunately, the kickstand did not make it to the Tough Armor series.
Overall, this is still my favorite Spigen product. The only "down" side is that I love the back of the S7, and I feel like the clear cases that Spigen carries can show off the back so much more. This case does not interfere with charging. The cutout ports are also very nicely done. There is no cutout for the sim card tray, but hopefully you are not taking that in and out often. The buttons feel clicky and responsive.

Straight out of the box the case is very attractive in coffee brown. The S7 fits in the holder perfectly and seems to be very secure. The magnetic clasp works well. All the cutouts are very generous. The overall look and feel are very nice and I am satisfied with my purchase with the following caveats:
VRS Design Wallet Folio Case
http://www.amazon.com/Galaxy-Design..._UL160_SR160,160_&refRID=028JFGRBSB4K0J2J85Y9
My particular case does not work with my wireless charger. If that is an issue avoid this case. Others can chime in if it's just me.
This will not replace a wallet completely. When you load up the case with cards and cash it does not sit well on the phone when closed. The three cards that I am am using don't sit that well either, but I feel they will be fine once the case is broken in a little more. Once broken in the front cover will have a curve to it for sure.
If you are the type not to use any screen protection, the case can potentially scratch the glass. The front flap has some give, so it will slide back and forth a bit. Also the edges of the cards come in direct contact with the screen.
A few stitches are not that tight. They have the potential to come loose with wear.
The "leather" has a few fine marks after a few hours in pocket. They are minor and hard to notice with a casual inspection. I am uncertain whether or not they will buff themselves out with wear or get worse. I will post a long term review at some point.
The front cover will press the home button while in pocket. There is a setting on the s7 to prevent this.
I know this sounds like a negative review, but I definitely do like the case. My logic when buying this case was that I would use it as a low profile wallet/case for occasions such as a night out or whenever I might want to minimize the bulk of carrying two items. If my caveats don't bother you too much than this may be the case for you.

If you have more cases , you can also add them into this thread

a lots of people contacted me about reviewing the cases , just simple contact the manufactory tell them what you can do for them,And you will have your answer

hey , i am going to add more reviews as i was contacted by some cases company , please add your review or tell me what you want to know

Spigen Wallet CASE
I really like this case. It's sleek and looks nice.
Pros
1. Phone fits snugly
2. Raised lips at top and bottom for extra protection
3. Look good
4. Holds up to 3 cards and easy to open
5. Buttons line up perfectly.
6. Double lining case for extra protection
Cons
1. Screen protector doesn't stay on due to tight fittings. (Solution: file down edges with file or scissors)
2. Card slot is very tight
3. Compared to my Onway case, this feels cheaper and more malleable.
4. Card slot could be a tad bigger.
Overall, it's a very nice case and I highly recommend it especially for someone who doesn't like carrying their wallet.

i am going to review a leather case , just trying to add more accurate description , let me know which case you want to know

any case that doesnt cover the buttons on the sides ?

dallasmanic said:
Otterbox Symmetery Case
I purchased the otterbox symmetry case in Eden teal. I wanted the floral pond design but it never seems to be in stock. The design on Eden teal is very cute. It reminds me somewhat of lilly Pulitzer or Vera Bradley designs. The case itself is fairly lightweight and a one piece construction. It Is hard plastic with a rubber lining and seal around the face.
The rubber lining around the face has a raised beveled edge. I'm not sure what the purpose of this is, but I do know it attracts dirt like crazy. Just a few moments in the pocket of my black pants and it picked up the color. It will probably continue to get dirty with use, but maybe regular wiping down with some alcohol or cleaner will help. It somewhat did today after I noticed the dye transfer. Also, the rubber seal has a little play.
The buttons are very firm but I hope they'll break in eventually. It's a little difficult to reach the mute switch, and I have very petite fingers. If you have large fingers, good luck!
I think it's pretty easy to get this case on and off. I didn't feel like I was gonna break my phone in two trying to get it off like my Speck Candyshell case.
I have a tempered glass screen protector on my phone and this case JUST BARELY clears it on the sides. It has plenty of room at the top and bottom.
I haven't dropped my phone yet to attest its protection. Then again, I really don't want to find out. Lol
I don't think this case was worth $40. Just seems a little steep for what it is. $25 is more reasonable. But hey, you pay for the name.
Overall, it's an okay case that hopefully provides more protection than you average run-of-the-mill snap on case.
Click to expand...
Click to collapse
Was this review just copied and pasted from an iPhone case review? Or does the S7 have a mute switch that I'm not aware of?

Relayers said:
any case that doesnt cover the buttons on the sides ?
Click to expand...
Click to collapse
i have not found yet

Artech 21 Cases - Reviews

I was lucky enough to be allowed to review the current cases that Artech 21 currently offers for the Galaxy S7. I'll be reviewing the Artech 21 Vivid Arkansas in the Champagne Gold/Black color, the Artech Jelly in Champagne/Clear, the Artech Little Rock rugged case in Black, and the Artech Dallas Lazer in Champagne Gold/Black.
This post is just going to be my brief first impressions. I will have complete, detailed reviews of all 4 cases up in the next day or 2.
First. Not that it directly involves the cases' performance, I still feel this is important. My communication with the company was fantastic. We communicated through Facebook Messenger and their responses were always quick, polite, and to the point. I think customer service is very important, who knows what could happen, mailman delivers to the wrong address, you got the wrong case by mistake, you have a question, or you're just plain not happy with it. It's good to know that the company will be there to promptly answer your questions and resolve your issue.
Now the packaging. It was the same for all 4 cases and very similar to the type of packaging you'd find on the name brand cases at Best Buy. Nothing really stands out. It protects the cases, is simple to open and doesn't have anything unnecessary.
Now on to the cases themselves...
(photo in attachment at bottom)
I'll start with the Jelly Series. It's pretty basic. A clear TPU shell with a Gold, harder plastic trim. The clear TPU, though smooth, is manufactured in a way that it provides a lot of grip. Probably the most grip of any of their cases. And the Gold trim feels sturdy enough to provide good protection against edge drops, it has a loop of gold at the bottom that gives it a unique design compared to other similar style cases. The phone fits very well. It's easy to install, fits snugly, and doesn't feel like there's any chance of it popping out accidentally. So, initial impressions are great. It seems like it will provide solid protection and grip in a low profile package that shows off this gorgeous phone instead of changing the look completely.
Next we'll go with the Lazer Dallas Series. It's got a black TPU shell with a vertically brushed finish on it with a more rugged gold trim similar to the one on the Jelly Series with the same extra bit of gold kinda looping up from the bottom that gives it a cool unique look that brings more gold to the overall design that goes great with my Gold Platinum S7. It's easy to install and fits snugly. It feels like it provides a good deal of protection while keeping a low profile. I keep my phone in my pocket, so it's important to me to keep it low profile. This definitely fits the bill for me. Just like the first. It doesn't have the grip of the Jelly, but still has good grip provided by the brushed finish. Solid case with a unique look
Third, my likely favorite of the four, is the Vivid Arkansas Series. It has a black TPU shell with horizontal ribs that provide great grip. It's a different kind of grip from the Jelly though, Like the other 2 cases, it has a more rugged TPU in gold. However this ones has a thich horizontal stripe, as well as the the loop thing at the bottom also found on the other. Like the other 2, installation is very easy. The phone fits snugly and securely. My phone definitely feels protected and it fits very comfortably in my pocket. It's a low profile case that feels like it could withstand some damage and has a very unique look that I haven't seen anywhere before that I absolutely love. I expected the Jelly to be my clear favorite (no pun intended lol), as it really just shows the original phone but provides good protection for it, but this Vivid Arkansas case looks incredible. I think it's my favorite looking. Not just of these 4 that I'm reviewing, but of any case currently available for the GS7.
Lastly, we have the Little Rock Series. It is BY FAR the most rugged of all the cases. Based on ititial impressions, I would say this case can withstand as much abuse as the hardcore Otterbox cases. I've had friends that give clumsy a new meaning (honestly. Broke 5 Galaxy S5s within one month) that would only use the most expensive Otterbox cases afterwards. He lost the front bezel on one somehow, bought a new one, then found the bezel and gave me his old one. So I had one for a decent amount of time to form an opinion on it. My initial impression of the Little Rock case is that it would have no problem providing that same level of hardcore protection. I'm a complete idiot and didn't know it came with a glass screen protector and broke it poking out the phone papers that were inside the cases in the packaging. Absolutely my fault. I have no excuse. I'll do my best to review it as if it had the glass as well. It has a front bezel that pops out and then back in for the installation. It snaps in VERY securely. To where it takes some effort to install, but feels like I could roll it down the worlds largest flight of stairs without the bezel popping off, let alone the phone coming out. Put simply, this case is obviously designed to take a ton of abuse while keeping the phone from incurring any damage. And my initial impression is that this phone can do that.
So far I really like them. But that may change for my final in-depth reviews. But the initial impression is very good. Though the designs and the looks are entirely subjective, I really like the looks of these cases

Regarding the Little Rock case, I agree that the thing is built like a tank without being too bulky. Excellent protection and feels very sturdy.
But the included screen protector fit is awful, as the edge is like 1/4" in from the edges of the screen. Looks terrible. Plus the case constantly lifts up the included screen protector. Don't bother putting the protector on. A PET screen works well with the case
The other gripe I have with the case is that the LED notification light is mostly covered by the case. They apparently did not measure that well when designing the case.

THREAD CLOSED
Artech 21 are not welcome on xda and users should refrain from posting reviews

Better Mobile App

welcome