I updated my XT910 to ICS with RSD Lite and 672.180.33 EU. Since the boot loader stayed the same 0A.6C, I'm wondering if I can downgrade to GB without bricking my RAZR.
Moved to correct sub forum.
mactrom said:
return to gingerbread.
Click to expand...
Click to collapse
this operation is not possible.
after total flash or upgrade to ICS and kernel 3.0.8 you not return to Gingerbread.
after install ICS and new kernel you flash only ICS roms with new kernel...
hacker
hacker812c said:
this operation is not possible.
after total flash or upgrade to ICS and kernel 3.0.8 you not return to Gingerbread.
after install ICS and new kernel you flash only ICS roms with new kernel...
hacker
Click to expand...
Click to collapse
+1
mactron said:
I updated my XT910 to ICS with RSD Lite and 672.180.33 EU. Since the boot loader stayed the same 0A.6C, I'm wondering if I can downgrade to GB without bricking my RAZR.
Click to expand...
Click to collapse
No, as RSD still flashes cdt.bin which is the bootloader.
Sent from my XT912 with Tapatalk
Leviathan26 said:
+1
No, as RSD still flashes cdt.bin which is the bootloader.
Sent from my XT912 with Tapatalk
Click to expand...
Click to collapse
+1 for detailed infomation and help us
hacker
Related
Hi guys, i updated my GT-19100_CHN_CHN 2.3.6 to 4.0.4 through android paranoid1.4 rom but i don't like 4.0.4 because of alot of bugs in it.
Is there any solution that i can restore back to my old official version 2.3.6 Thanks for help in advance.
jaazii said:
Hi guys, i updated my GT-19100_CHN_CHN 2.3.6 to 4.0.4 through android paranoid1.4 rom but i don't like 4.0.4 because of alot of bugs in it.
Is there any solution that i can restore back to my old official version 2.3.6 Thanks for help in advance.
Click to expand...
Click to collapse
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
iXanza said:
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
Click to expand...
Click to collapse
how to flash a stock 2.3.6??? i don't know. am new to it
jaazii said:
how to flash a stock 2.3.6??? i don't know. am new to it
Click to expand...
Click to collapse
Download Odin (can be found in this forum)
Download your stock firmware 2.3.6 (I dont know about the CHN_CHN Version)
Put your phone into Download Mode. (Power Off, Hold volume down+home+power button)
Run Odin
Choose PDA file which is your stock firmware.
Flash
jaazii said:
how to flash a stock 2.3.6??? i don't know. am new to it
Click to expand...
Click to collapse
Use search.. You will find lots of topics,, Anyways, following link will guide you :
http://forum.xda-developers.com/showthread.php?t=1110160
IMPORTANT : While choosing model from the dropdown on Checkfusdownloader, choose "GT-I9100G"... Do not choose "GT-I9100".
相信你是个中国人，要不然应该不能买到中国版的9100G。
用Odin刷5文件包吧…………
can any one please give me the link of android 2.3.6 rom for i9100G ???
jaazii said:
can any one please give me the link of android 2.3.6 rom for i9100G ???
Click to expand...
Click to collapse
try this..http://forum.xda-developers.com/showthread.php?t=1533091
..and try to find ur needs..
iXanza said:
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
Click to expand...
Click to collapse
I tried this before when I first flashed to CM9, I get bootloops. Since then, I forever stick to ICS and never trying to convert back to GB although I wish to do so. I dare not and i'm lazy to deal with the bootloops.. I not sure why I get bootloops btw, some other ppl faced that as well. So I hope this brother able to convert back to GB successfully. Good luck.
To convert back to GB you have to flash an old GB bootloader for some reason after flashing the stock ROM. After that do a full wipe, everything else ended up in a bootloop for me.
Fingers crossed .
Sent from my Galaxy S II using Tapatalk 2
GoZoU1 said:
To convert back to GB you have to flash an old GB bootloader for some reason after flashing the stock ROM. After that do a full wipe, everything else ended up in a bootloop for me.
Fingers crossed .
Sent from my Galaxy S II using Tapatalk 2
Click to expand...
Click to collapse
So end up you success? Would you mind to share the old GB bootloader? Not the stock rom. Is the particular bootloader. Thanks!!
Yes I succeeded converting back to GB stock ROM, now I'm on french ICS.
Here is the bootloader for german xxlb1 GB 2.3.6: http://uploadmirrors.com/download/0S0I4G2U/Bootloader_XXLB1.tar
GoZoU1 said:
Yes I succeeded converting back to GB stock ROM, now I'm on french ICS.
Here is the bootloader for german xxlb1 GB 2.3.6: http://uploadmirrors.com/download/0S0I4G2U/Bootloader_XXLB1.tar
Click to expand...
Click to collapse
I can flash GB stock GDZKL3 after flashing this bootloader right? bootloader should flash before flashing rom, or after flashing the rom? Thanks.
I tried both options. Try flashing the bootloader at first but don't forget to uncheck "Auto-Reboot" in odin. After that you should be able to flash the stock GB ROM. Do you have a jig just in case of any problems? I remember I used my jig, but don't really know why.
Gesendet von meinem GT-I9100G mit Tapatalk 2
Development section is mean to release Rom. kernels, mods, etc. Not ask questions or making threads for help. Moved to Q&A
Hi all,
I am finally going to install a leak after the Moto UK soak test ****ed up last week.
I'm running 651.167.26.XT910.Retail.en.EU stock (but rooted) and want to install whichever is the best 4.0.4 leak/ROM is easiest to do.
Which, any how?
Thanks
adaimespechip said:
Hi all,
I am finally going to install a leak after the Moto UK soak test ****ed up last week.
I'm running 651.167.26.XT910.Retail.en.EU stock (but rooted) and want to install whichever is the best 4.0.4 leak/ROM is easiest to do.
Which, any how?
Thanks
Click to expand...
Click to collapse
Rds Lite with the sbf files from here:
http://forum.xda-developers.com/showthread.php?t=1747800
If you whant there is an update for tht version with shoul improove battery life and the radio
http://forum.xda-developers.com/showthread.php?t=1755764
The instruction to isntall the second update are in the first post
I forgot, if you install from rds lite maybe you need to wipe data/cache to make it work. So if you don't want to do it (but i suggest you to do it and make a backup with titanium, so the system will be clean) you have to update from the ota files
Thanks for the reply - Will give this a go when I get home later on!
How do I get RSD to pick up the downloaded zip.. What do I use to extract it?
adaimespechip said:
How do I get RSD to pick up the downloaded zip.. What do I use to extract it?
Click to expand...
Click to collapse
You have to unzip it, then with rds lite you have to select the xml file that is inside the sbf files
Managed it- upgraded to rsd 5.7 and it picked it straight up
Sent from my XT910 using xda app-developers app
Motorola xt910 Stuck in fastboot mode
Hi guys,
I have a motorola xt910 verizon that a friend of mine gave it to me, and its stuck in the fastboot mode it was running a 651.167.22.XT910.Retail.en.fr, when I tried to flash another rom via rsd it failed, and I also tried vi flashme.bat but it failed again.
So, I was trying to flash a ics rom, I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr version.
Does anyone can help me find that 651.167.26.XT910.Retail.en.fr version to flash it via rsd?
Cheers:fingers-crossed::fingers-crossed::fingers-crossed:
( Sorry for my english )
Dário_Remane said:
Hi guys,
I have a motorola xt910 verizon that a friend of mine gave it to me, and its stuck in the fastboot mode it was running a 651.167.22.XT910.Retail.en.fr, when I tried to flash another rom via rsd it failed, and I also tried vi flashme.bat but it failed again.
So, I was trying to flash a ics rom, I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr version.
Does anyone can help me find that 651.167.26.XT910.Retail.en.fr version to flash it via rsd?
Cheers:fingers-crossed::fingers-crossed::fingers-crossed:
( Sorry for my english )
Click to expand...
Click to collapse
if it's a Verizon model, it's not an XT910,
if it had 651.167.26.XT910.Retail.en.fr it's not a Verizon model
Sent from my XT1254 using XDA Labs
sd_shadow said:
if it's a Verizon model, it's not an XT910,
if it had 651.167.26.XT910.Retail.en.fr it's not a Verizon model
Sent from my XT1254 using XDA Labs
Click to expand...
Click to collapse
Thanks for the reply, and sorry I was wrong, its a xt910 model.
It was running 651.167.22.XT910.Retail.en.fr, and its stuck in the fastboot mode can't enter in the recovery.
I wanted to flash it to a ics rom but I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr and I can't find it anywhere, all the websites that used to have this rom are down.
Can you please help ! ! ! !
Dário_Remane said:
Thanks for the reply, and sorry I was wrong, its a xt910 model.
It was running 651.167.22.XT910.Retail.en.fr, and its stuck in the fastboot mode can't enter in the recovery.
I wanted to flash it to a ics rom but I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr and I can't find it anywhere, all the websites that used to have this rom are down.
Can you please help ! ! ! !
Click to expand...
Click to collapse
You have here everything
http://forum.xda-developers.com/droid-razr/general/index-motorola-droid-razr-development-t3023837
And you can flash any EU sbf file...
Here is an ICS stock rom on my Mega account
https://mega.nz/#!8cdwjBCL!Md8-HLx3ha8ZBVRjoVcy_iCdCr8teBceTG09S_To31E
And JB
https://mega.nz/#!EJ931TqQ!CJ90LQMpwt8vJn-h9OGaeFAor3A6S5ukazES-RwRorg
welder73 said:
You have here everything
http://forum.xda-developers.com/droid-razr/general/index-motorola-droid-razr-development-t3023837
And you can flash any EU sbf file...
Here is an ICS stock rom on my Mega account
https://mega.nz/#!8cdwjBCL!Md8-HLx3ha8ZBVRjoVcy_iCdCr8teBceTG09S_To31E
And JB
https://mega.nz/#!EJ931TqQ!CJ90LQMpwt8vJn-h9OGaeFAor3A6S5ukazES-RwRorg
Click to expand...
Click to collapse
Thanks mate
I will check there.
Hi devs,
I had KitKat from here: (http://forum.xda-developers.com/showthread.php?t=2535920) installed in stock slot using Safestrap 3.71. Unfortunately I accidentally uninstalled the recovery from Safestrap and now the phone won't start up. Flashing from stock recovery fails. What are my options experts? How can I revive my phone? Kindly link me to resources and guide me through this. I'm lost.
Thanks & Regards,
Sreyan
Nobody on this one?? :crying:
Please help!
bugnotch said:
Nobody on this one?? :crying:
Please help!
Click to expand...
Click to collapse
Find the correct firmware that you need for your phone and flash it with RSD lite
Draxin said:
Find the correct firmware that you need for your phone and flash it with RSD lite
Click to expand...
Click to collapse
Is it possible to flash back to ICS from 4.4 over the stock slot? Do I need to flash using Fastboot or SBF? Does it have to be stock, 'coz I'm not sure if I'll even find a fastboot for a 4.4 stock.
Could you detail a bit on exactly which version of android should I flash with? That'd be of great help..
Thanks.
bugnotch said:
Is it possible to flash back to ICS from 4.4 over the stock slot? Do I need to flash using Fastboot or SBF? Does it have to be stock, 'coz I'm not sure if I'll even find a fastboot for a 4.4 stock.
Could you detail a bit on exactly which version of android should I flash with? That'd be of great help..
Thanks.
Click to expand...
Click to collapse
No, you can't go back to ICS. Your firmware flash will be official OEM Motorola firmware, so it will be Jelly Bean and why RSD lite is required. You will need the correct firmware for your region or carrier, or it won't complete the flash. read/watch tutorials first if you haven't used RSD before. Your 4.4 was a custom ROM. So there aren't any firmware flashes for it. After you have flashed with RSD and the firmware you will be bonestock, unrooted JB. From there root again, reinstall your recovery etc. etc.
Hit thanks if I helped.
Draxin said:
No, you can't go back to ICS. Your firmware flash will be official OEM Motorola firmware, so it will be Jelly Bean and why RSD lite is required. You will need the correct firmware for your region or carrier, or it won't complete the flash. read/watch tutorials first if you haven't used RSD before. Your 4.4 was a custom ROM. So there aren't any firmware flashes for it. After you have flashed with RSD and the firmware you will be bonestock, unrooted JB. From there root again, reinstall your recovery etc. etc.
Hit thanks if I helped.
Click to expand...
Click to collapse
Hi Draxin,
Thank you for the suggestion. About the OEM firmware, mine's an Asia Retail version of Razr. We never had an official firmware beyond ICS. So what do you suggest? Will deleting the CID and then flashing with a JB EU work?
bugnotch said:
Hi Draxin,
Thank you for the suggestion. About the OEM firmware, mine's an Asia Retail version of Razr. We never had an official firmware beyond ICS. So what do you suggest? Will deleting the CID and then flashing with a JB EU work?
Click to expand...
Click to collapse
If you didn't delete the CID to swap firmwares before to get CM11, I wouldn't start now. Most xt910 firmwares now are JB, and once you are on the motorola JB kernel you can't go back to ICS, which was why I said that. If you weren't on a official JB before then that doesn't apply to you.
I would flash the official Firmware for your device, and yes you will have to put your device into apfastboot for RSD lite.
Draxin said:
If you didn't delete the CID to swap firmwares before to get CM11, I wouldn't start now. Most xt910 firmwares now are JB, and once you are on the motorola JB kernel you can't go back to ICS, which was why I said that. If you weren't on a official JB before then that doesn't apply to you.
I would flash the official Firmware for your device, and yes you will have to put your device into apfastboot for RSD lite.
Click to expand...
Click to collapse
Thanks Draxin. I'll try and let know.
I was able to RSD with EU Retail JB rom. Thanks.
I tried to flash my atrix 4g using rsd lite with sbf file. Following error is coming and phone is not booting , got stuck with M logo.
SUF:1081:2
failed to boot 3
starting RSD mode
Help needed from experts to solve the problem.
I tried to flash it again through the same process but no use.
sspakhare said:
I tried to flash my atrix 4g using rsd lite with sbf file. Following error is coming and phone is not booting , got stuck with M logo.
SUF:1081:2
failed to boot 3
starting RSD mode
Help needed from experts to solve the problem.
I tried to flash it again through the same process but no use.
Click to expand...
Click to collapse
ok yeah, that's a good idea. lets ask for help but give practically no information. What version did you flash? what stock version did you have before customizing? unlocked bootloader?
palmbeach05 said:
ok yeah, that's a good idea. lets ask for help but give practically no information. What version did you flash? what stock version did you have before customizing? unlocked bootloader?
Click to expand...
Click to collapse
What version did you flash?
sbf_flash pudding unlock (4547-fix-try2.sbf)
what stock version did you have before customizing?
FROYO 2.2.2
Bootloader not unlocked.
sspakhare said:
What version did you flash?
sbf_flash pudding unlock (4547-fix-try2.sbf)
what stock version did you have before customizing?
FROYO 2.2.2
Bootloader not unlocked.
Click to expand...
Click to collapse
did you do fastboot oem unlock before flashing that?
I used RSD lite 5.7 and sbf file of 2.3.6 Movistar America and flashed my Atrix 4g.
And got my Atrix back in work.
Now where I can get sbf file of ICS or Jellybean so that I can flash again and upgrade my Atrix.
I know that Motorola has not provided official update but still I want to take chance.
Previously I have installed CM7 and CM10.1 but I didn't like it and also the phone is rebooting constantly.
sspakhare said:
And got my Atrix back in work.
Now where I can get sbf file of ICS or Jellybean so that I can flash again and upgrade my Atrix.
I know that Motorola has not provided official update but still I want to take chance.
Previously I have installed CM7 and CM10.1 but I didn't like it and also the phone is rebooting constantly.
Click to expand...
Click to collapse
Congrats! Now you are on the most up to date sbf. There is no ICS or JB sbf file. There is, however, an unofficial official ICS release (AtrICS v2.0), CM9 (4.0.4), CM10 (4.1.2), and CM10.1 (4.2.2) ROMs available to flash via CWM.
palmbeach05 said:
Congrats! Now you are on the most up to date sbf. There is no ICS or JB sbf file. There is, however, an unofficial official ICS release (AtrICS v2.0), CM9 (4.0.4), CM10 (4.1.2), and CM10.1 (4.2.2) ROMs available to flash via CWM.
Click to expand...
Click to collapse
Thanks !!
can I install Atrix 2 rom file from sbf.droid-developers.org to my Atrix 4g. It has ICS zip.
sspakhare said:
Thanks !!
can I install Atrix 2 rom file from sbf.droid-developers.org to my Atrix 4g. It has ICS zip.
Click to expand...
Click to collapse
HELL NO!!!! Otherwise you will end with a paperweight....
sspakhare said:
Thanks !!
can I install Atrix 2 rom file from sbf.droid-developers.org to my Atrix 4g. It has ICS zip.
Click to expand...
Click to collapse
Atrix 4G and Atrix 2 are not compatible. Some of their theme packages from the themes section may be compatible, but as far as ROMs go, its a no
Hi. Im very New to Rooting kind of stuff..
My Motorola Razr maxx was good in STOCK GB 2.3.6 ( 65.1.40.XT910.PSHAsiaRetail.en.03 )
I UPDATED ( OTA ) to ICS 4.0.4. This ROM really sucks. I jus wanna roll back to Stock GB.
I somehow got the Official ROM of GB. Pls guide me wat should be done next.
I really dont care bricking my phone or any stuff.. I need the GINGERBREAD Back.
tHANKS IN ADVANCE
you cannot downgrade stock android version
Sent from my XT907 using Tapatalk
Actually i got d info that, by Rooting the Phone and then installing SAFESTRAP, i can install custom ROM. is that so ?
Or is there any way i can unlock the bootloader and then install Custom ROM GB ??
srikanth786 said:
Actually i got d info that, by Rooting the Phone and then installing SAFESTRAP, i can install custom ROM. is that so ?
Or is there any way i can unlock the bootloader and then install Custom ROM GB ??
Click to expand...
Click to collapse
yes, you can root and install a custom rom, I don't know if there any custom gingerbread roms that will work.
GB Failed
sd_shadow said:
yes, you can root and install a custom rom, I don't know if there any custom gingerbread roms that will work.
Click to expand...
Click to collapse
I installed SAFESTARP and then created a partition.
Selected the ZIP FILE ( GB ROM ) and gave INSTALL.
It says error. is there any way can i unlock the Bootloader ????
srikanth786 said:
I installed SAFESTARP and then created a partition.
Selected the ZIP FILE ( GB ROM ) and gave INSTALL.
It says error. is there any way can i unlock the Bootloader ????
Click to expand...
Click to collapse
No,there isn't.
And you can't flash stock rom with SS...or any custom GB rom because you're on ICS.
Try Liquidsmooth Milestone version,that's Kitkat 4.4.4
Sent from my Razr XT910