There are a few posts regarding rooting Canadian ICS Note. It seems there is a script in the OTA ICS upgrade that re-installs stock recovery (3e) after flashing CWM using ODIN.
Note: The offending script only exists in the OTA ICS upgrade, and not in update from Kies or samfirmware ROM.
If you don't have the offending script, then after Step 7, just reboot into recovery, install superuser ZIP from CWM, reboot, and you're done.
I'm summarizing the steps needed to flash CWM and root Canadian ICS Note:
1) Download Odin, CWM tar, and superuser zip (http://forum.xda-developers.com/showthread.php?t=1763896 Post # 3)
2) Install Odin
3) Copy superuser zip file to Phone
4) Start Odin and browse for the CWM tar file in the PDA section
5) Put the phone into download mode (VOLUME DOWN + POWER, then VOLUME UP)
6) Connect Phone to PC
7) Flash CWM with Odin
8) As the phone is rebooting, take out the battery. This is done to avoid the script install-recovery.sh from reinstalling stock recovery
9) Put battery back and boot into recovery (VOLUME UP + VOLUME DOWN + POWER, Release POWER after first vibration)
10) Install superuser ZIP from CWM, you are now rooted
11) Reboot phone
12) Install root explorer or ES File explorer and enable root operations and /system mount on them.
13) Find /etc/install-recovery.sh and rename it to install-recovery.sh.bkp
14) Repeat steps 4 to 7
15) Reboot. You should now have CWM and Root.
Thanks to SKyRocKeting727 and aleks07.
This could not have come at a better time...I was just sitting down at my computer to try this...Wish me luck
Success won't come from luck but it will from reading every step twice at least before any clicks or taps.
Thanks so much! Worked like a charm! Just finished nandroid backup of stock Bell rom with SU.
Getting ready to Try Flapjaxx UCLF6 rom.:good:
This thread should be stickied...
worked! thanks a lot
With ES File Explorer, I get "Sorry, operation failed" attempting to rename install-recovery.sh. I installed Terminal Emulator, and tried a simple
Code:
su
mv /etc/install-recovery.sh /etc/install-recovery.sh.bkp
to which I get "Read only file system"
I checked back in SuperUser, and ES Explorer (and Terminal) have root allowed; es file explorer has Root Explorer enabled in settings.
Ideas?
Edit: I realise the OP lists "install_recovery.sh", but I have no such file, just "install-recovery.sh". The contents are exactly what you'd think, though, conditional test to restore the recovery image.
Second Edit: I am an idiot. I missed "Mount /, /system as writable". Carry on, nothing to see here
THANKS MAN!!!!! it worked!
I've been trying for days to figure this out.
It appears I didn't have to do steps 12 - 15? My phone appears to be rooted and CWM is installed.:good:
Wintersdark said:
With ES File Explorer, I get "Sorry, operation failed" attempting to rename install-recovery.sh. I installed Terminal Emulator, and tried a simple
Code:
su
mv /etc/install-recovery.sh /etc/install-recovery.sh.bkp
to which I get "Read only file system"
I checked back in SuperUser, and ES Explorer (and Terminal) have root allowed; es file explorer has Root Explorer enabled in settings.
Ideas?
Edit: I realise the OP lists "install_recovery.sh", but I have no such file, just "install-recovery.sh". The contents are exactly what you'd think, though, conditional test to restore the recovery image.
Second Edit: I am an idiot. I missed "Mount /, /system as writable". Carry on, nothing to see here
Click to expand...
Click to collapse
Lol I was just gonna tell you to mount the system as writable.
Good luck, I just had to rename the file since I was already rooted.
I wonder if we rename back to the original than well get stock recovery again?
Easy way of doing it I guess.
hmm...
i didn't have to go through steps 12-15 because i couldn't find
the install_recovery.sh file so i just rebooted to see if CWM works
and it did also my phone was rooted.
is there anyone whose situation the same as mine?
and yes i am on ICS
ygong said:
i didn't have to go through steps 12-15 because i couldn't find
the install_recovery.sh file so i just rebooted to see if CWM works
and it did also my phone was rooted.
is there anyone whose situation the same as mine?
and yes i am on ICS
Click to expand...
Click to collapse
You'll find, though, that after you reboot into Android, CWM will be gone. You'll still have root though. To find the file in ES File Explorer, you'll need to go into ES's settings and enable:
Up to root
Root Explorer
/, /system write able
Then you just click up until you get to /, then click Etc, and install-recovery.sh will be in there.
ygong said:
i didn't have to go through steps 12-15 because i couldn't find
the install_recovery.sh file so i just rebooted to see if CWM works
and it did also my phone was rooted.
is there anyone whose situation the same as mine?
and yes i am on ICS
Click to expand...
Click to collapse
Yup exact same here!
Wintersdark said:
You'll find, though, that after you reboot into Android, CWM will be gone. You'll still have root though. To find the file in ES File Explorer, you'll need to go into ES's settings and enable:
Up to root
Root Explorer
/, /system write able
Then you just click up until you get to /, then click Etc, and install-recovery.sh will be in there.
Click to expand...
Click to collapse
yeah CWM is still installed...
even though i rebooted my phone
Yup mine is still installed after reboot too!
Sent from my SGH-I717R using Tapatalk 2
kwhit said:
Yup mine is still installed after reboot too!
Sent from my SGH-I717R using Tapatalk 2
Click to expand...
Click to collapse
I think it might be helpful in this thread to list which Canadian Carrier you are with to determine which ones have to take the additional steps...
I am with Bell Mobility and can confirm that, for me, it was necessary,,,,,,
I am greatful to the OP and encourage and any of you that were helped to hit the Thank You button from his post..
crutzulee said:
I think it might be helpful in this thread to list which Canadian Carrier you are with to determine which ones have to take the additional steps...
I am with Bell Mobility and can confirm that, for me, it was necessary,,,,,,
I am greatful to the OP and encourage and any of you that were helped to hit the Thank You button from his post..
Click to expand...
Click to collapse
You are with Bell, I am with Rogers, and my friend is with Telus, and we all had to do the renaming of the script. I'm not really sure why some have to do it and some don't. Also, not sure why AT&T Notes don't have to do it.
zaptor99 said:
You are with Bell, I am with Rogers, and my friend is with Telus, and we all had to do the renaming of the script. I'm not really sure why some have to do it and some don't. Also, not sure why AT&T Notes don't have to do it.
Click to expand...
Click to collapse
Were you rooted on GB before?
Just looking for common denominators....
crutzulee said:
Were you rooted on GB before?
Just looking for common denominators....
Click to expand...
Click to collapse
Myself and my friend with Telus were not rooted before on GB.
I'm on Bell did root my phone when I was on GB
Rogers, and I was rooted, but had reflashed to pure stock before upgrading to ics.
Related
J Ok so in my never ending struggle against the Evil Eclair/T-Mo/HTC NAND Protection and the Futility of Trying to flash a ROM With the "Supposed AndRoot QuIck Root Method" As well as a fine point from Nbetcher that the Engineering build must be flashed because Android has NAND protection while running. I have devised my own "No PC ROOT Method!!!"
Required Files (Tested For MT3G SLIDE Latest OTA Unrooted Stock)
1.Download Androot From Location of Choosing (I'm Using Version 1.6.2)
2.Download ESPRIMG.zip (ENG build)
3.Download SlideEng-Package.zip
4.Download Custom Rom Of Your Choosing(Mine Is CM 6.1.1 Stable)
5.Download Android Terminal Emulator(From Market)
6.Download Root Explorer Android (Requires Root) (From Market Or Some Place Online)
7.Download File Explorer (Dev:Adao Team)(From Android Market)
8.Download Latest Clockwork Recovery(I Used 2.5.0.1)
*Updated* 1/09/2011 (Thanks to dbzfanatic for links)
dbzfanatic said:
Universal Androot http://forum.xda-developers.com/attachment.php?attachmentid=391774&d=1283202114
ESPRIMG.zip www.4shared.com/file/OsmF_ZD7/ESPRIMG.html
SlideEng-Package.zip http://www.4shared.com/file/sz0VO2TL/SlideEng-package.html
Cyanogen 6.1.1 Stable http://mirror.teamdouche.net/get/espresso/update-cm-6.1.1-Slide-signed.zip
Clockwork Recovery (may be old but will work) http://www.4shared.com/file/KzYHr4U_/update.html
Now people can stop *****ing about links. Everything else can be found on the android market.
Click to expand...
Click to collapse
Please Note I Am NOT The DEV Behind these Apps nor am I Resposible For Any Damages You May Incur To Your Device or Warranty by using this Method! Also Before anyone says I repped someone off remeber I accidentally discovered this using 2 failed methods because they essentially cancel each other out.(The Latter Nbetchers works just not after the AndRoot One)!!!
So...
1st Download/Install all needed files from market( File Manager Android Terminal Emulator)
2nd Download all zip images, Recoveries, Roms, apps from phone browser Directly To SD ROOT(Google em until I get links up on Dev Forum)
3rd. Unzip SlideEng-Package.zip To Root using File Manager or Other Zip Program for android(Andro-Zip Works Well)
4th Change Name of Clockwork to Update.zip(Case Sensative)
5th Install AndRoot And Run Root Me With Install Su & Temp Root/Unroot After Reboot Selected(Or Else You Will Boot Loop)
6th Install And Run Root Explorer then Copy and paste flash_img and mtd0.img to /data/local on android device by multi-select copy then RM R/W in program in upper left on data local folder.
7th IMPORTANT!!! Long Press and hold each copied file and set permissions to allow read and write on both user and the lowest option (I Think Dev or system)
8th Run Android Terminal Emulator and type the following commands verbatim spaces included Pressing enter after each line($ n # will be there provided you follwed all steps if not go back to androot and root again):
$ su
# cd /data/local
# chmod 04755 flash_image
# ./flash_image misc mtd0.img
Now power off and reboot using VOL-DOWN + POWER
It'll reboot into the HBoot Screen and ask if you want to Check ESPRIMG.zip after Verifying it will ask you to flash Select Yes (VOL-UP) And Wait DO NOT POWER DOWN OR TAKE OUT BATTERY!!!
Once its Completed it will ask you to Reboot select no Instead and Go To Recovery
Now Select APPLY Update.zip to flash CLOCKWORK RECOVERY YAY!!! :-D Now We Can Flash a Custom Rom With Root and Even Go As Far As S-OFF!!! But Please Be Sure Its Already On Your Micro SD...
Select Wipe Data Factory Reset by Scrolling with VOL- UP/DOWN or Track Pad and Use Power/Trackpad TO Select.
Now Use Install Zip from SD Card to Install Custom Rom(Flash GApps Second if downloaded and desired if using CM Mod 6.1.1) Now Reboot And Enjoy!!! If you Wanna Flash Anything Else Use Rom Manager From Market and Som Custom Roms to Boot into Clockwork!!! Thanks to all the Devs and their tools and immense knowledge for Making this Possible! Thanks To All The ROM Chefs Too!!!
DeezyFn'Baby said:
6th Install And Run Root Explorer then Copy and paste flash_img and mtd0.img to /data/local on android device by multi-select copy then RM R/W in program in upper left on data local folder
Click to expand...
Click to collapse
Edit:nvm, ill try it when i get my replacement slide.
I don't think the slide needs S-OFF to write to data but I do think it needs root beforehand, or at least shell root.
just to make it easier to anyone flashing this, i would put links to DL's of those files. first thing i noticed when i read. put me off to this method.
btw, this is me trying to help, not ripping on you
dbzfanatic said:
I don't think the slide needs S-OFF to write to data but I do think it needs root beforehand, or at least shell root.
Click to expand...
Click to collapse
I don't think so? If /data couldn't be written to without root or s-off, how would people install apps who never rooted their phones? Where is the system data stored and modified? /data is fully modifiable I'm pretty sure.
I'm willing to admit I could be wrong on that but I thought apps were installed in /data because it was the system calling the package installer not the user.
dbzfanatic said:
I'm willing to admit I could be wrong on that but I thought apps were installed in /data because it was the system calling the package installer not the user.
Click to expand...
Click to collapse
In terms of read/write permissions, the system has the same permissions as the user. The system can't write to /system if the user can't, and vice versa. /data and /cache have no nand protection
MusicMan374 said:
In terms of read/write permissions, the system has the same permissions as the user. The system can't write to /system if the user can't, and vice versa. /data and /cache have no nand protection
Click to expand...
Click to collapse
In the post I did add if I had the time I would post links if not ill do it later to whomever above stated their statement. If you don't want to "Try" it don't and don't comment. It was an accident I found it and I have since replicated my process on 3 slides and it works. The Reason it does is because gaining temporary root inside android even without gaining full being blocked by nand or S-Off can be can be used to modify the permissions of system files while the memory is running tho not the actual NAND itself which I believe S-OFF does... So when I said 6th mount the drive as R/W in root explorer there is an option to remount the drive R/W to allow you to long press the items in that folder and change their permissions then I said unmount to save the permission fix that's what the Temp Root Gained from AndRoot Does.... Now I'm gonna try and update my Original post with links for people who want an esier time doing this like I would have liked and for the. Sarcastic ones so then you can just press the Thumbs Up button ok?
DeezyFn'Baby said:
In the post I did add if I had the time I would post links if not ill do it later to whomever above stated their statement. If you don't want to "Try" it don't and don't comment. It was an accident I found it and I have since replicated my process on 3 slides and it works. The Reason it does is because gaining temporary root inside android even without gaining full being blocked by nand or S-Off can be can be used to modify the permissions of system files while the memory is running tho not the actual NAND itself which I believe S-OFF does... So when I said 6th mount the drive as R/W in root explorer there is an option to remount the drive R/W to allow you to long press the items in that folder and change their permissions then I said unmount to save the permission fix that's what the Temp Root Gained from AndRoot Does.... Now I'm gonna try and update my Original post with links for people who want an esier time doing this like I would have liked and for the. Sarcastic ones so then you can just press the Thumbs Up button ok?
Click to expand...
Click to collapse
Your instructions don't have anything to do with /system I don't know what you are babbling about. I'm not disproving your root method, I was just trying to explain that /data is not nand protected. /system IS nand protected, and without s-off or a r/w overlay you wouldn't even be able to modify the permissions of files in /system, but since your root method has to do with /data it works.
MusicMan374 said:
Your instructions don't have anything to do with /system I don't know what you are babbling about. I'm not disproving your root method, I was just trying to explain that /data is not nand protected. /system IS nand protected, and without s-off or a r/w overlay you wouldn't even be able to modify the permissions of files in /system, but since your root method has to do with /data it works.
Click to expand...
Click to collapse
I'm not babbling I was referring to the first reply but ur probably right about the sys files as I didn't mess with them. But I did obtain root anway all of the files can easily be found by doing a search on the XDA forums and ill add the links when I get to a pc doing this from the android browser is painful...
DeezyFn'Baby said:
I'm not babbling I was referring to the first reply but ur probably right about the sys files as I didn't mess with them. But I did obtain root anway all of the files can easily be found by doing a search on the XDA forums and ill add the links when I get to a pc doing this from the android browser is painful...
Click to expand...
Click to collapse
Yeah, that's why you don't need s off for this to work, which others were saying
Sent from my T-Mobile myTouch 3G Slide
Thanks for posting this method! It worked flawlessly! Had the files and rooted it in about a half hour. Thanks again for this nice work around!
Sent from my ROOTED myTouch 3G Slide using the XDA App
This would make it easier for new folks if you had links next to the items needed for this... you can't just tell others they need this and that with at least a link on where to find it or download it... like having me find a treasure chest without clues or a map just saying haha. good guide though and yes I did read you'll be adding links soon =p
Agreed links would help but if people google the files he mentioned they are all easy to find. Even new folks know how to google =D
Sent from my ROOTED myTouch 3G Slide using the XDA App
Universal Androot http://forum.xda-developers.com/attachment.php?attachmentid=391774&d=1283202114
ESPRIMG.zip www.4shared.com/file/OsmF_ZD7/ESPRIMG.html
SlideEng-Package.zip http://www.4shared.com/file/sz0VO2TL/SlideEng-package.html
Cyanogen 6.1.1 Stable http://mirror.teamdouche.net/get/espresso/update-cm-6.1.1-Slide-signed.zip
Clockwork Recovery (may be old but will work) http://www.4shared.com/file/KzYHr4U_/update.html
Now people can stop *****ing about links. Everything else can be found on the android market.
dbzfanatic said:
Universal Androot http://forum.xda-developers.com/attachment.php?attachmentid=391774&d=1283202114
ESPRIMG.zip www.4shared.com/file/OsmF_ZD7/ESPRIMG.html
SlideEng-Package.zip http://www.4shared.com/file/sz0VO2TL/SlideEng-package.html
Cyanogen 6.1.1 Stable http://mirror.teamdouche.net/get/espresso/update-cm-6.1.1-Slide-signed.zip
Clockwork Recovery (may be old but will work) http://www.4shared.com/file/KzYHr4U_/update.html
Now people can stop *****ing about links. Everything else can be found on the android market.
Click to expand...
Click to collapse
The only thing about 4shared is that it doesn't work right on the stock HTC web browser, since javascript is kinda glitchy on that one. Works fine on froyo/cm6.1.1 with the aosp browser, but for a TRUE pcless method you need direct or mediafire links I think.
I post links because everyone *****es and yet someone still *****es. Those aren't my uploads, I simply posted them so people would stop *****ing. I personally haven't had issues with 4shared even with the stock browser back before I rooted my phone. If you want to reupload them to another hosting site be my guest but like I said, they aren't my uploads.
Stop whining
Here are some direct links for those who complain about the 4Share site.
Oh, and Ill put a gapps link up in thar too. It has the new market, and it works as long as you don't install anything until it finishes restoring. At least it did for me.
That Clockwork link is broken. I'm just sayin' :3
ESPRIMG.zip: http://db.tt/kEvPIyu
SlideEng-package: http://db.tt/n57yN2a
Gapps: http://db.tt/L0SNLhj
EDIT: Clockwork on next page.
supermario12312 said:
Here are some direct links for those who complain about the 4Share site.
Oh, and Ill put a gapps link up in thar too. It has the new market, and it works as long as you don't install anything until it finishes restoring. At least it did for me.
That Clockwork link is broken. I'm just sayin' :3
ESPRIMG.zip: http://db.tt/kEvPIyu
SlideEng-package: http://db.tt/n57yN2a
Gapps: http://db.tt/L0SNLhj
Click to expand...
Click to collapse
thank you for that, not only if that direct link better there mate.. but man the download speed is better ahaha... I already have root but I'm rooting a friends phone ;P then soon a warranty exchange phone for me.
Once I reach recovery... it just sits there with no options or anything...
OK... I have my Atrix Unlocked, Rooted and up on 2.3.4(4.5.91) Life is Good, however...
I am attempting to get the CWM (ROMRacers) onto my system so I can do the backups again and mess with the other ROM's. However, I am getting the same issue as a few others are, I go into Clockwork and tell it to load a ROM or just to backup and it puts me into the Android Recovery and not CWM. It seems that the install-recovery.sh file is the issue. I cannot remove/move/rename it with the SuperUser enabled ES File Explorer or other apps. Is there an adb shell command string I can use to do this? I am not familiar enough with it to want to just start slashing it without having the safety net of CWM in place.
I searched and came up with this nexus thread about deleting the file
http://forum.xda-developers.com/showthread.php?t=740748
I was working from this Atrix thread that referred to deleting the file if CWM is not acting correct:
http://forum.xda-developers.com/showthread.php?t=1154600
Thnx! This is the first time I could not find a direct answer to the issue I was having.
C0rr0ded said:
OK... I have my Atrix Unlocked, Rooted and up on 2.3.4(4.5.91) Life is Good, however...
I am attempting to get the CWM (ROMRacers) onto my system so I can do the backups again and mess with the other ROM's. However, I am getting the same issue as a few others are, I go into Clockwork and tell it to load a ROM or just to backup and it puts me into the Android Recovery and not CWM. It seems that the install-recovery.sh file is the issue. I cannot remove/move/rename it with the SuperUser enabled ES File Explorer or other apps. Is there an adb shell command string I can use to do this? I am not familiar enough with it to want to just start slashing it without having the safety net of CWM in place.
I searched and came up with this nexus thread about deleting the file
http://forum.xda-developers.com/showthread.php?t=740748
I was working from this Atrix thread that referred to deleting the file if CWM is not acting correct:
http://forum.xda-developers.com/showthread.php?t=1154600
Thnx! This is the first time I could not find a direct answer to the issue I was having.
Click to expand...
Click to collapse
In root explorer change option of read only to read and write?? On top
Sent from my CM7 Motorola Atrix 4G
C0rr0ded said:
OK... I have my Atrix Unlocked, Rooted and up on 2.3.4(4.5.91) Life is Good, however...
I am attempting to get the CWM (ROMRacers) onto my system so I can do the backups again and mess with the other ROM's. However, I am getting the same issue as a few others are, I go into Clockwork and tell it to load a ROM or just to backup and it puts me into the Android Recovery and not CWM. It seems that the install-recovery.sh file is the issue. I cannot remove/move/rename it with the SuperUser enabled ES File Explorer or other apps. Is there an adb shell command string I can use to do this? I am not familiar enough with it to want to just start slashing it without having the safety net of CWM in place.
I searched and came up with this nexus thread about deleting the file
http://forum.xda-developers.com/showthread.php?t=740748
I was working from this Atrix thread that referred to deleting the file if CWM is not acting correct:
http://forum.xda-developers.com/showthread.php?t=1154600
Thnx! This is the first time I could not find a direct answer to the issue I was having.
Click to expand...
Click to collapse
What Ilkinansr92 said....
But if you are too cheap to buy root explorer like myself, es file explorer from the market does the same thing but it's free..
Settings> Mount /system as writable" and you are good to go.
OK.. was able to delete the file. Now to get it to play nice with CWM's low level.
Got it and was successful with a backup. Next (not right now) is to test the restore before I get stupid with a different ROM. I like where I am and will revert if the others are not to my liking...
Why? because it is not Steve's toy I am renting and I can!
C0rr0ded said:
OK.. was able to delete the file. Now to get it to play nice with CWM's low level.
Got it and was successful with a backup. Next (not right now) is to test the restore before I get stupid with a different ROM. I like where I am and will revert if the others are not to my liking...
Why? because it is not Steve's toy I am renting and I can!
Click to expand...
Click to collapse
can i ask how did you remove it??
Hey first time posting, prior to unlocking the bootloader on my Photon 4g I had a bunch of ROM's listed in ROM Manager. After I got it unlocked I only see four options, Font Packs for Android 4.0, Cerberus, Superuser, Google Apps, ClockworkMod. Also, I cannot back up through ROM Manager either, it results in a white triangle with a yellow exclamation point. I am currently running stock Android 2.3.4 no ROM running. It worked perfect before I unlocked my Photon, any advice?
You sure the roms you saw were for the photon? If I had to take a blind guess id go with when rom manager was initially installed the device wasn't rooted, and the app was unable to determine which device you had and was showing roms for all phones. Now that you're rooted and the app has permission and can read the device fingerprint and is able to display the proper downloads.
KSmithInNY said:
You sure the roms you saw were for the photon? If I had to take a blind guess id go with when rom manager was initially installed the device wasn't rooted, and the app was unable to determine which device you had and was showing roms for all phones. Now that you're rooted and the app has permission and can read the device fingerprint and is able to display the proper downloads.
Click to expand...
Click to collapse
That's kind of what I was thinking, my phone was rooted prior to the unlock when I was viewing the roms. But I don't know much about all this since this is my first unlock. I do know some phones do not have a list in ROM Manager. Any ideas as to the backup issue?
You need to delete a file off your phone that installs stock recovery every time it boots. You can adb or use and explorer that can modify /system like root explorer, and delete install-recovery.sh from /system/etc
Once deleted power down into fastboot and reflash CWM or do it through rom manager. Either way you need to delete that file because it's forcing you back to stock recovery.
Good luck
KSmithInNY said:
You need to delete a file off your phone that installs stock recovery every time it boots. You can adb or use and explorer that can modify /system like root explorer, and delete install-recovery.sh from /system/etc
Once deleted power down into fastboot and reflash CWM or do it through rom manager. Either way you need to delete that file because it's forcing you back to stock recovery.
Good luck
Click to expand...
Click to collapse
That would explain a lot. I'll give that a shot. Thank you!
KSmithInNY said:
You need to delete a file off your phone that installs stock recovery every time it boots. You can adb or use and explorer that can modify /system like root explorer, and delete install-recovery.sh from /system/etc
Once deleted power down into fastboot and reflash CWM or do it through rom manager. Either way you need to delete that file because it's forcing you back to stock recovery.
Good luck
Click to expand...
Click to collapse
That would explain a lot, I'll give that a shot. Thank you!
Greetings everyone!
New *registered* user here! I've been frantically sifting through post after post on the forums all night hoping to get some help with an issue I am having on my Vibrant.
Goal:
Remove some bloatware ONLY, not looking to install any ROMs or modify the phone too much...just clean some annoying apps and icons off.
Phone Information:
Model SGH-T959
Firmware 2.2
Baseband T959UVKB5
Kernel 2.6.32.9
Build FROYO.UVKB5
I currently have the latest version of Java, Android SDK, and SuperOneClick installed.
Install directory of AndroidSDK:
C:\AndroidSDK
My method of failure:
Open SuperOneClick, Click "Root"
Start, Run, "CMD"
cd c:\AndroidSDK\tools
adb shell
mount -o rw,remount /dev/block/st19/system
This is where it fails and I run into an endless loop of it telling me the proper usage of the "mount" command. I thought I had it at one point but when I typed: rm /system/AmazonMp3.apk all it did was tell me that it was a read-only file and that it couldn't be deleted.
Can someone help lead me in the right direction of what I am doing wrong? I rooted and removed all bloatware about a year ago but I just did an upgrade through MiniKies to the latest version of firmware and I can't seem to remember the process I went through that long ago to get it done right.
I apologize for possibly asking a question that has been asked numerous times but I just couldn't seem to get the wording right to get any helpful results in the search of the forums. Thank you so much for the time in reading this and the future help if any can be provided. Have a great night!!!
It looks like you are in the wrong directory. Open a command prompt in
C:\AndroidSDK\platform-tools
Open the platform tools folder. Click on a blank space > hold down the shift key > hit right click > select open command window here. Then enter the commands:
adb devices "to check if your device is connected. also make sure usb debugging is enabled on your phone.
adb remount
adb shell
su
mount -o remount,rw -t rfs /dev/stl5 /system
rm -r /system/app/[AppName].apk
If you want a list of all your /system/apps enter this command
cd /system/app
ls *.apk
This is much easier if you download rom toolbox from the market. All you do is go to /system/app and delete whatever bloatware you dont want.
BUT BE EXTREMELY CAREFUL WHEN DELETING SYSTEM APPS. ONLY DELETE WHAT YOU KNOW IS BLOATWARE OTHERWISE YOU WILL GET FC'S
good luck
Would I still need to follow the steps prior to that and use SuperOneClick to root the device or do I just skip that process and go straight to the cmd prompt?
Also, I followed a tutorial I found for installing the Android SDK that informed me to copy all the files from android-tools to the tools directory and use that instead but I don't know what the use in that is except for maybe a smaller directory name?
EDIT: I tried what you said with and with using SuperOneClick prior to the procedure and the cmd prompt displayed the following text:
*opened cmd promt in C:\AndroidSDK\tools (no files in platform-tools anymore)*
adb devices (it found my device connected)
adb remount (adb remount: no such file or directory exists)
The adb shell and su commands works fine BUT I still hit the endless loop of it trying to explain to me the "usage" of the mount command.
I will look into Rom toolbox as I'm trying to figure this out as well. Thank you.
I strongly recommend you download root explorer or some similar root browser app. Of course though your phone must be rooted. Just try rom toolbox. It has its own root browser within the app along with other useful features. This is probably the easiest way to uninstall the bloatware in your case since you are having issues with adb.
Sent from my Galaxy Nexus using XDA
Thank you!
Okay, I have the suggested "rom toolbox" downloaded from the market and I will try to use that but SuperOneClick does not root the phone deep enough for rom toolbox to see the phone as rooted so...will the "updated.zip" method work for this instead?
I haven't tried it before but I am willing to give it a go if you think it's the best method. If this is the method you recommend, would you happen to have a link to the most recent or atleast most trusted updated.zip rooting method?
CScrivener said:
Thank you!
Okay, I have the suggested "rom toolbox" downloaded from the market and I will try to use that but SuperOneClick does not root the phone deep enough for rom toolbox to see the phone as rooted so...will the "updated.zip" method work for this instead?
I haven't tried it before but I am willing to give it a go if you think it's the best method. If this is the method you recommend, would you happen to have a link to the most recent or atleast most trusted updated.zip rooting method?
Click to expand...
Click to collapse
You can try rooting your phone using this toolbox.
http://forum.xda-developers.com/showthread.php?t=954509
If that does not work for you i will try and find the link to the "one click root program" i use all the time.
Here is an excellent guide to root.
http://forum.xda-developers.com/showthread.php?t=849028
Sent from my Galaxy Nexus using XDA
Here is the program i use. Just remember to have usb debugging enabled on your phone. It really cant get any easier than this.
http://forum.xda-developers.com/showthread.php?t=739300
Sent from my Galaxy Nexus using XDA
So I downloaded the one click program you suggested and the program itself seems to bee pretty straight forward.
I connected phone to computer with debugging on. Opened program and hit one click root. It started doing it's thing...phone rebooted and went into recovery. I started to follow instructions up until I got to where it said install packages. When I clicked it, the phone said installation failed no such file our directory exists.
The phone is looking for the updated.zip file but none exists in the one click folder. There is a root.zip and an unroot.zip...do I need to rename one of them to proceed???
Thank you so much for all the help so far, I feel like I'm so close but just not there yet. You have been an incredible help!
Sent from my SGH-T959 using XDA
CScrivener said:
The phone is looking for the updated.zip file but none exists in the one click folder. There is a root.zip and an unroot.zip...do I need to rename one of them to proceed???
Click to expand...
Click to collapse
The way (Stock) Recovery works is if you are not "Install from SD" then it will look for the file labeled Update.zip. So you can rename only the Root.zip to Update.zip and make sure that is the only thing on your internal SD labeled that or with .zip Put the unroot.zip in a folder for now. Then try again.
Alright, will give that a try when I get home. I thought I read that the program copied the update.zip file to the phone during it's process so I didn't want to do anything to work against that. I will rename one of the files, copy it to the phone and give the one click root another shot. Thank you!
Sent from my SGH-T959 using XDA
CScrivener said:
Alright, will give that a try when I get home. I thought I read that the program copied the update.zip file to the phone during it's process so I didn't want to do anything to work against that. I will rename one of the files, copy it to the phone and give the one click root another shot. Thank you!
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
There is no need to rename anything. The program does it all for you. Play close attention to the first screen (green one) if it says update.zip copied successfully it will then reboot your phone to stock recovery. Once you are in stock recovery all you do is click reinstall packages. Keep clicking reinstall packages even if it reboots the first time. To prove my point mount your phone to your pc and check to see if the update.zip is copied onto the root of your into storage. If not well copy the update.zip from the last guide i suggested from above.
Also check to see if the superuser app is installed on your phone. The program also installs that along with the update.zip. If you have superuser then go to the market download rom manager so you could download CWM.
Sent from my Galaxy Nexus using XDA
Alright, so I tried it again once I got home. Didn't work BUT I did see that update.zip was installed into my phone. The sig verification failed, which means I need to change recovery versions to the one that skips sig verification correct?
I'll go search the forums for that since I remember seeing that a little while ago but that is the correct path I need to take at this point in time am I right?
Thank you so much! Big big help!
You can pull the CWR from my signature. Same as before. Put it on your internal labeled update.zip, boot into recovery and and scroll down to Reinstall Packages. Hit it. It will cycle and probably come back to stock recovery. Hit Reinstall Packages again and the stock recovery will go from blue to green (CWR).
Side note, probably from there you will be able to install the Superuser update.zip. Just go to Install from SD card and find it and hit it. The reboot. Might not but the CWR instructions above shoudl work for you.
Well I changed the recovery version using the file from http://forum.xda-developers.com/showthread.php?t=833423 and then used the OneClickRoot and was able to get the update installed (I think). The phone booted up normally, I noticed that SU Permissions was installed so I figure I am rooted correct? WRONG. Rom toolbox says I am not. Is there another way to verify? Should I reinstall Rom toolbox incase it's just bugging out on me?
So I tried using Rom Manager too. Looks as tho SU is not installed correctly, will have to try again I guess.
Cannot install CWR, tried and the recovery text stays blue even after 14 times of reinstalling packages...
This phone will be sent flying across the room sometime tonight I'm guessing. About to erase the entire thing and try starting from scratch again. (Start from Eclair and work my way up maybe)
If you are willing to start from Eclair it would be soooo much easier that all this stuff.
Odin to stock, flash CWR from my signature, go from blue to green and then flash Fishman's Bionix and you are good to go. Simple and way easier than all this mess. Just download Fish's and put it on you SD card somewhere you'll remember. Once in green recovery just scroll to that ROM and flash it per OP.
We've just been trying to Root you since on your OP you said you didn't want to flash a custom ROM.
Well...I'm still trying to avoid flashing Roms (I've upgraded through MiniKies and that's it).
I've only been trying to root just to clean bloatware off but it seems that I must be lacking the technical skills to follow instrcutions properly....nothing is cooperating and even after following all steps nothing wants to work like it should.
Grrrr! One last try to get CWR working before I lose my mind and need to take a break/walk away for a bit.
Ok, so I'm currently back to stock Eclair (ew!!) and about to boot to recovery to install CWR. Wish me luck on that one....
Wooo, CWR up and running! Now I just have to work on a flash maybe or whatever steps were suggested next...I might try the ROM you suggested.
The ROM gets placed on external sdcard and installed from within CWR correct?
Do most ROMs remove bloatware and useless apps?
Yes and are pre-Rooted. Put the ROM.zip on either card. I have a folder that I use. Boot into recovery and get green recovery back. Go to install from SD, find the ROM and flash it per the OP instructions.
Bloat free, pre-Rooted and usually has Voodoo so you can get Voodoo Sound from the market and have a sonic ear-gasm.
Just wanted to say thanks for all the help! I installed the suggested ROM last night and I am very happy with the results thus far. It was alot easier than I thought it would be. Flashing a ROM was MUCH more simpler than the root only decision. Thank you again!
In case you want to do the actually OTA with your phone, and got some errors (dead android), you might want to check:
+ if you are using "CWM Recovery" (then uninstall it as in http://forum.xda-developers.com/showthread.php?t=2095825)
+ if you are using "Remove QSlide Apps from NotificationBar" (http://forum.xda-developers.com/showthread.php?t=2194423)
But don't use the QSlide revert file from above thread, it doesn't restore the exact matched file for OTA to work with (you can try if you want). To save you some trouble, I have attach the original files (LGSystemUI.apk and its odex). Unzip and overwrite them in the folder /system/app (use ES Explorer to remount /system RW first).
+ still not found the problem, check the few last lines of this file: /system/cache/recovery/last_log
It should say which file mismatches the checksum, and in the case of mine, it is LGSystemUI.apk, which I cannot find anything related searching google. And that's why I make the thread so people can search google and found it here.
chicguy said:
In case you want to do the actually OTA with your phone, and got some errors (dead android), you might want to check:
+ if you are using "CWM Recovery" (then uninstall it as in http://forum.xda-developers.com/showthread.php?t=2095825)
+ if you are using "Remove QSlide Apps from NotificationBar" (http://forum.xda-developers.com/showthread.php?t=2194423)
But don't use the QSlide revert file from above thread, it doesn't restore the exact matched file for OTA to work with (you can try if you want). To save you some trouble, I have attach the original files (LGSystemUI.apk and its odex). Unzip and overwrite them in the folder /system/app (use ES Explorer to remount /system RW first).
+ still not found the problem, check the few last lines of this file: /system/cache/recovery/last_log
It should say which file mismatches the checksum, and in the case of mine, it is LGSystemUI.apk, which I cannot find anything related searching google. And that's why I make the thread so people can search google and found it here.
Click to expand...
Click to collapse
Removed CWM and still get dead android red triangle icon.
My log also shows LGSYSTEMUI.APK ERROR
eSZee said:
Removed CWM and still get dead android red triangle icon.
My log also shows LGSYSTEMUI.APK ERROR
Click to expand...
Click to collapse
If you are rooted then all you need to do is find a nandroid backup of previous jb and flash it. Then you use the trick to force the OTA. If you are not rooted then the only thing I can say is download the kdz, flash it, and wait for the OTA.
there are a few things that manipulate the system: link2sd, overclocking, busybox, custom recovery. . .My thing was the busybox. I totally forgot that I downloaded it and my update didn't work at first. Good Luck
eSZee said:
Removed CWM and still get dead android red triangle icon.
My log also shows LGSYSTEMUI.APK ERROR
Click to expand...
Click to collapse
Go go page 9 of the forum link below. There is a Dropbox link of a factory rooted version of V20f for the 769 US version to flash if you have access to CWM on your phone.
http://forum.xda-developers.com/showthread.php?t=2359044
Sent from my LG-P769 using Tapatalk 2
TheCoutures said:
Go go page 9 of the forum link below. There is a Dropbox link of a factory rooted version of V20f for the 769 US version to flash if you have access to CWM on your phone.
http://forum.xda-developers.com/showthread.php?t=2359044
Sent from my LG-P769 using Tapatalk 2
Click to expand...
Click to collapse
Downloaded several times to make sure it wasn't a bad download. Went to apply zip, as soon as I pressed YES, INSTALL ABORTED.
I have no mods or edited system files or anything like that. All I ever did was CWM and root. Had qslide removed but reverted.
Make sure MD5 sum is correct. The other stuff doesn't matter. You are flashing a full backup not an OTA which requires all stock apps.
Sent from my LG-P769(20F) using the xda-developers app. If I helped you please hit the thanks button.
eSZee said:
Downloaded several times to make sure it wasn't a bad download. Went to apply zip, as soon as I pressed YES, INSTALL ABORTED.
I have no mods or edited system files or anything like that. All I ever did was CWM and root. Had qslide removed but reverted.
Click to expand...
Click to collapse
Wait you tried to install it as a zip
You are supposed to extract it and put the nandroid in the CWM backup directory.
sent from my locked rooted P769 v20D
I'm on YouTube (BioDesigner48)
I'm having the same issue, I do not have CWM or QSlide Remove installed, I've uninstalled all Root related apps and still encountering the same issue....
eSZee said:
Downloaded several times to make sure it wasn't a bad download. Went to apply zip, as soon as I pressed YES, INSTALL ABORTED.
I have no mods or edited system files or anything like that. All I ever did was CWM and root. Had qslide removed but reverted.
Click to expand...
Click to collapse
In my OP, I said "don't use the QSlide revert file from above thread, it doesn't restore the exact matched file for OTA to work with".
In case you still have trouble with the OTA, try to follow what I wrote: "To save you some trouble, I have attach the original files (LGSystemUI.apk and its odex). Unzip and overwrite them in the folder /system/app (use ES Explorer to remount /system RW first)."
Hope that helps!
For other people with problems, I suggest to use the Recovery Flashable Zip mentioned in one of the reply.
Or, if you are as paranoid as I am (who knows what people might put in those zip file ) (and somewhat technically knowledgeable), "check the few last lines of this file: /system/cache/recovery/last_log" to see what file got error, and try to get the original file from 20D (which should have the matched SHA1 checksum) and replace them.
chicguy said:
In my OP, I said "don't use the QSlide revert file from above thread, it doesn't restore the exact matched file for OTA to work with".
In case you still have trouble with the OTA, try to follow what I wrote: "To save you some trouble, I have attach the original files (LGSystemUI.apk and its odex). Unzip and overwrite them in the folder /system/app (use ES Explorer to remount /system RW first)."
Hope that helps!
For other people with problems, I suggest to use the Recovery Flashable Zip mentioned in one of the reply.
Or, if you are as paranoid as I am (who knows what people might put in those zip file ) (and somewhat technically knowledgeable), "check the few last lines of this file: /system/cache/recovery/last_log" to see what file got error, and try to get the original file from 20D (which should have the matched SHA1 checksum) and replace them.
Click to expand...
Click to collapse
Get the full P769BKv20f kdz file download here. Please be advised that this is just stock and if you flash this ROM then you WILL LOSE ROOT! But you can download and create a bin file to do the Lelus root method.