I have made this thread in order to cover the lack of some excellent releases of Samsung
official Roms and to help others by delivering roms deodexed here and u can help me if u
know how to deodex a stock rom.
I hope that I have helped those people/developers/themers or even normal users who are
looking for stock deodxed roms
This is only for GT-I9100
Features:
Base Firmware: I9100XWLSD (4.1.2)
Region: Europe, Nordic Countries
Carrier: Unbranded
Build Date: 31 January 2013
Modem: XXLS8
CSC: OXXLS6
_____________________________________________________________________________________
-Stock XWLSD NON-Wipe (Android 4.1.2)
-Fully Deodexed
-BusyBox
-Zipaligned
-Rooted
-Added SuperSU
-Philiz Kernel
Instructions:
-Download the rom to ur SDCARD
-Go to recovery and do a wipe then flash it.
Download:
Stock Deodexed XWLSD
Stock Deodexed XWLS8
NOTE: In this rom I have added Siyah kernel and this causing a boot loop and other fc. So, this was my mistake and I'm sorry. After instilling this rom go and just flash Philz kernel v4.00-b22 and u will be fine.
Older Deodexed Roms
Thanks:
- Dsixda
- Siyah
- Sammobile
- Chainfire
- Wanam
- Philz
Reserved
Reserved...
Any chance of getting JPLPF without Samsung's bloatware?
Have you tried wiping or factory resetting your device which has JPLPF? I hope it doesn't suffer from the hard brick bug...
almahdy said:
Any chance of getting JPLPF without Samsung's bloatware?
Have you tried wiping or factory resetting your device which has JPLPF? I hope it doesn't suffer from the hard brick bug...
Click to expand...
Click to collapse
Hi mate
What do u mean with bloatware ? It is a stock rom and this is why I don't remove Sammy stuff because it isn't a custom rom.
Yes it works with no problem. Hard brick bug is associated with Android 4.0.4 roms.
Thanks
Stock Deodexed XWLPO Android 4.0.4 is released.
See first post of this thread
If i flash siyah 3.5.2, it's ok?
Sent from my GT-I9100 using xda premium
ndric59 said:
If i flash siyah 3.5.2, it's ok?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
YES
ndric59 said:
If i flash siyah 3.5.2, it's ok?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
yes
Just keep in mind
and Siyah Kernel older than v3.4.1 will BREAK ur phone with android 4.0.4
But all Siyah v3.4.1 and newer are safe for ur phone
Thank you for the rom...
What about new lpt..can you make it?
zokimk79 said:
Thank you for the rom...
What about new lpt..can you make it?
Click to expand...
Click to collapse
lol I think I'm late for the party
if u still want it then I will make it
u welcome mate
Stock Deodexed XWLPU is up. See main page of this thread
althebyani said:
Stock Deodexed XWLPU is up. See main page of this thread
Click to expand...
Click to collapse
Thanks a lot mate
anshmiester78900 said:
Thanks a lot mate
Click to expand...
Click to collapse
u welcome mate
When I connect the phone to the charger remains active screen, I have not found how to do is disconnect one, someone help me.?.
THANKS
ereodin said:
When I connect the phone to the charger remains active screen, I have not found how to do is disconnect one, someone help me.?.
THANKS
Click to expand...
Click to collapse
what u mean with active screen ? The screen doesn't turn off when connecting the charger to ur phone ?
If one does not go off.
Enviado con Tapatalk 2.
www.wuala.com/ereodin
Hi,
thanks man ,, we need this..
what kernel do you recommend with this ROM .. siyah or speedmod ?
thanks..
hello
would u pls help to deodex zslpp rom? it's the latest 4.0.4 in my country.
this rom is very good, for me more smoother than lpt and lpu
others also suggest to try, thx!
http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=0&os=1&type=1#
ereodin said:
If one does not go off.
Enviado con Tapatalk 2.
www.wuala.com/ereodin
Click to expand...
Click to collapse
I don't understand what u mean
Related
Stock Samsung XXKH3 ROM
Gingerbread 2.3.4
I9100XXKH3
PDA: XXKH3
CSC: OXAKH13 (MultiCSC: CPW, ITV, DBT, KOR, XEO, XEF, XEU)
Modem: XXKH3
Kernel: CF-Root KH3
Features:
Deodexed
Zipaligned
Rooted
SuperUser
BusyBox
ClockworkMod Recovery 4
CF-Root KH3 Kernel
No Lag in deodexed browser (Thanks To GadgetCheck)
Download
Instructions:
Download the ROM
Put it on your SD Card
Enter Recovery
Install Zip from SD Card
Select the ROM File
After installation reboot the device
Enjoy!
Credits:
Thanks To ChainFire
Thanks To GadgetCheck
Thanks To Dsixda
What is special about your Stock Deodexed ROM's
just curious
EDIT: Check your PM.
GadgetCheck said:
What is special about your Stock Deodexed ROM's
just curious
EDIT: Check your PM.
Click to expand...
Click to collapse
First of all they are Completely stock,
Other features
Deodexed
Rooted
Zipaligned
Busybox
CF-Root Kernel
CWM
Hello
What does deoxed mean and what are the benefits?
Brgds... /Tubgirl
Tubgirl said:
Hello
What does deoxed mean and what are the benefits?
Brgds... /Tubgirl
Click to expand...
Click to collapse
Read the FAQ in my Post here http://forum.xda-developers.com/showpost.php?p=16634411&postcount=2
GadgetCheck said:
Read the FAQ in my Post here http://forum.xda-developers.com/showpost.php?p=16634411&postcount=2
Click to expand...
Click to collapse
This is a deodexed rom maker vision
It is just simplier to make deodexed Rom...
Sent from my GT-I9100 using XDA Premium App
The ROM Has been posted.
PT_BR support?
doesnt seem to be able to download from hotfile..
Thanks man for this great rom. I always wanted a deodexed stock rom. Can u plz add the advanced power menu and crt off in the next release??
Thanks again :d
so this is 100% stock rom only deodexed? I'm I correct ?
because i flashed some of the other rom and it looked like the stock but it was themed and it lags when texting messeges. I always keep all my texts now i Have 10 thousand would this work fine for my use?
patt2k said:
so this is 100% stock rom only deodexed? I'm I correct ?
because i flashed some of the other rom and it looked like the stock but it was themed and it lags when texting messeges. I always keep all my texts now i Have 10 thousand would this work fine for my use?
Click to expand...
Click to collapse
Yes, This is 100& stock ROM no mods just be aware its a Wipe version so it will remove all your data so back it up!
Will it give us the yellow triangle when booting?
sorry for noob question.
Night....
[EDIT] NVM Just installed your rom it doesnt
Can i install this in my SGS2 with the below specs. FYI i have already rooted the phone with CWM and have the CWM manager and superuser icons.
Thanks in advance.
PDA: I9100XWKF3
PHONE: I9100XXKE7
CSC: I9100XEUKD1
:|
Nightlight said:
Will it give us the yellow triangle when booting?
sorry for noob question.
Night....
[EDIT] NV Just installed your rom it doesnt
Click to expand...
Click to collapse
on my phone it still appears
gemor said:
probably a noob question: will I be able to uninstall stock applications from application manager (or nitrality) after flashing this ROM?
I'm currently on unrooted SGSII (going to root soon)
PDA: I9100XXKG6
PHONE: I9100XXKG6
CSC: I9100XEUKD1
Click to expand...
Click to collapse
yes u will be if u can on KG6.
great, thx bro
very very very very very very slow download... (3 hours left) other mirrors please?
Link does not work!
Sent from my GT-I9100 using Tapatalk
Firmware info:
PDA: I9100XXLP6
BASEBAND: I9100XXLP6
KERNEL : XXLP6
Android 4.0.3
Features:
Rooted
BusyBox
ClockworkMod Recovery 5
CF-Root LP6 Kernel
Only modification from stock is the inclusion of CF-ROOT kernel.
Link:
[ROM][CWM][LP6 4.0.3] Odexed Stock
If you have GPS problems, try flashing the fix from this post:
http://forum.xda-developers.com/showpost.php?p=21806078&postcount=1320
What are the changes?
Do i flash this with ODIN or do i need CWM allready flashed?
Anything that dosent work?
Is it stock ICS launcher?
alexandre.cgd said:
What are the changes?
Click to expand...
Click to collapse
Samsung does not provide changelogs, so test and report. It feels faster, and i didn't get any crahes, but it's subjective judgment.
chadswill said:
Do i flash this with ODIN or do i need CWM allready flashed?
Anything that dosent work?
Is it stock ICS launcher?
Click to expand...
Click to collapse
As the title says, it's flasheable via CWM. For ODIN, download directly from SamFirmware. It's SAMSUNG stock, so it does have Touchwiz. Everything seems to work.
OK, thanks
Is it possible at all to uninstall Touchwiz. so one would get the default ICS launcher?
No work gps this version 4.0.3
msaraiva said:
Firmware info:
PDA: I9100XXLP6
BASEBAND: I9100XXLP6
KERNEL : XXLP6
Android 4.0.3
Features:
Rooted
BusyBox
ClockworkMod Recovery 5
CF-Root LP6 Kernel
Only modification from stock is the inclusion of CF-ROOT kernel.
Link: - Still Uploading
[ROM][CWM][LP6 4.0.3] Odexed Stock
Click to expand...
Click to collapse
thanks was waiting for this!
chadswill said:
OK, thanks
Is it possible at all to uninstall Touchwiz. so one would get the default ICS launcher?
Click to expand...
Click to collapse
It's not viable to remove Touchwiz, but you can use the Trebuchet Launcher, that is close to stock:
http://forum.xda-developers.com/showthread.php?t=1410674
Be sure to move it to /system/app, or else you will have problems with widgets, etc.
Thanks..
Waiting.........
Upload finished, the link is available!
msaraiva said:
Upload finished, the link is available!
Click to expand...
Click to collapse
downloading..
the theme is green?
it can be change to blue?
sbarrett said:
the theme is green?
it can be change to blue?
Click to expand...
Click to collapse
Sorry, i don't do MODs. I only uploaded this to help people that do not want to use ODIN.
msaraiva said:
Samsung does not provide changelogs, so test and report. It feels faster, and i didn't get any crahes, but it's subjective judgment.
As the title says, it's flasheable via CWM. For ODIN, download directly from SamFirmware. It's SAMSUNG stock, so it does have Touchwiz. Everything seems to work.
Click to expand...
Click to collapse
mms work maw? 3g?
Stupid question but...
Since it's in a zip - is it flash via Odin using ONE PACKAGE?
tonynz said:
Since it's in a zip - is it flash via Odin using ONE PACKAGE?
Click to expand...
Click to collapse
The question wouldn't be stupid if it wasn't stated on the thread title that this is a CWM package. So, no ODIN involved. And i have already answered this question on the first page.
I wonder if people read things at all...
msaraiva said:
I wonder if people read things at all...
Click to expand...
Click to collapse
Takes no wondering at all in fact
Sorry - didn't realise CWM mean ClockworkMod!
I am assuming I can directly upgrade from Gingerbread?
tonynz said:
Sorry - didn't realise CWM mean ClockworkMod!
I am assuming I can directly upgrade from Gingerbread?
Click to expand...
Click to collapse
You should wipe data first.
Thanks - it didn't book the first time nor went to setup (booted but it had no launcher??) but 2nd time boot it worked.
Is there any way of finding out wether or not I have a kernel that is affected by the MMC-Superbrick-bug? I strongly believe I am not affected by this bug, but it's better to be safe than sorry.
I have a Cyanogenmod Kernel which I flashed using the "noob-proof" guide for Cyanogenmod 9.
GT-I9100 said:
3.0.32-CM-ge9cef6c
[email protected] #1
SMP PREEMPT Thu Aug 9 23:45:01 PDT 2012
Click to expand...
Click to collapse
Any help would be appreciated :laugh:
bartdoek said:
Is there any way of finding out wether or not I have a kernel that is affected by the MMC-Superbrick-bug? I strongly believe I am not affected by this bug, but it's better to be safe than sorry.
I have a Cyanogenmod Kernel which I flashed using the "noob-proof" guide for Cyanogenmod 9.
Any help would be appreciated :laugh:
Click to expand...
Click to collapse
no it doesn't have it, only the stock kernels of Some v4.0.4 firmware had it, so ur safe with that kernel(CM9)
bartdoek said:
Is there any way of finding out wether or not I have a kernel that is affected by the MMC-Superbrick-bug? I strongly believe I am not affected by this bug, but it's better to be safe than sorry.
I have a Cyanogenmod Kernel which I flashed using the "noob-proof" guide for Cyanogenmod 9.
Any help would be appreciated :laugh:
Click to expand...
Click to collapse
-Only original/stock kernels of ICS 4.0.4 firmwares are affected by the super brick bug.
Kernels based on the stock 4.0.4one may also contain the bug e.g insecure kernels for rooting or CF-ROOT.
-99.9% is the custom kernels however do not have this super brick bug. I can confirm these kernels don't have it:
-Siyah kernel
-Dorimanx kernel
-dream kernel
-Speedmod kernel
-Neak kernel
-Codeworkx kernel, shipped with CYANOGENMODs and AOKP Roms
Swyped from my Samsung Galaxy SII
Thanks a ton! You guys are the best :good:
Guys its only a suggestion.....
It will be good if some developer can make a windows based application or script that can check any kernel with "MMC_CAP_ERASE=1 or ENABLED"
So one will have to just select a kernel file (.zip or .tar or zimage) and the application will return with a message saying "This Kernel is SAFE to Flash !!!" or "Danger !!! This kernel has Brick bug. Install with extreme caution"
That will help people to check any kernel before flashing and without any fear of brick..
Add fluxi kernel to the safe kernels list.
Sent from my GT-I9100 using Tapatalk 2
I have run the Gotbrickbug/v1,0.apk and this app said that i have the brickbug. I run 4.0.3 baseband XXLPW - kernel 3,0,15/i9100XWLPD-CL524746.
How can i safely update to jellybean cm10?
Spiralzz said:
Add fluxi kernel to the safe kernels list.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I know definitely that Fluxi is safe but i was recommending the safe ones for stock ROMs.
Fluxi only works on AOSP ROMs
Swyped from my Samsung Galaxy SII
Spiralzz said:
Add fluxi kernel to the safe kernels list.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Lol,I asked that the other day.
Sent from my GT-I9100 using xda premium
theunderling said:
Lol,I asked that the other day.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Lol!
Swyped from my Samsung Galaxy SII
Hi guys, I'm new here and I'm thinking about changing the ROM on my SGS2.
Searching around the internet I noticed the warning about this bug quite a few times. I didn't find a way to check if I got it though.
Here are the info from my phone:
Android version: 4.0.3
Baseband version: I9100XXLPQ
Kernel version: 3.0.15-I9100XXLPQ-CL223505 [email protected] #3
Build number: IML74K.XXLPQ
I've updated from GB to ICS when it first came out through Odin. I didn't wait for the ROM from my provider, though, but just downloaded a rom from some Poland provider.
So, do I have this bug? If you can't help me, can you please tell me how I can find out?
Thanks
Theres a sticky in the general section listing the firmwares affected by the bug. But it only affects 4.0.4. You're on 4.0.3
So as long as you dont upgrade to 4.0.4 stock you're safe.
Sent from my GT-I9100 using xda app-developers app
@HAXTREME: Thank you! I found the sticky now. I'm glad my ROM is not affected.
How about Jelly Bean ? I have a brick bug chip on my i9100...is it safe to go to JB or JB kernels are affected ?
F670ES said:
How about Jelly Bean ? I have a brick bug chip on my i9100...is it safe to go to JB or JB kernels are affected ?
Click to expand...
Click to collapse
As of now, nobody seems to have reported the emmc bug on the leaked JB. So its probably safe. If you want to be 100% safe, you may want to use a custom kernel with the JB stock firmware.
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
As of now, nobody seems to have reported the emmc bug on the leaked JB. So its probably safe. If you want to be 100% safe, you may want to use a custom kernel with the JB stock firmware.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Hi HAXTREME,
I've flashed my SGS2 with Dorimanx kernel V7.27, which says that this version is safe kernel.
So can I flash a custom ROM like Resurrection Remix JB on my SGS2 - I9100 phone ?
How can I verify my phone is safe from brickbug issue ?
Regards,
Hereticnine.
HAXTREME said:
As of now, nobody seems to have reported the emmc bug on the leaked JB. So its probably safe. If you want to be 100% safe, you may want to use a custom kernel with the JB stock firmware.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I am going to install custom JB and test a couple of custom kernels. But I'm not sure if all custom JB kernels are 100% safe ? I know Dorimanx, Siyah and Philz are safe.
Btw will that procedure be safe for me (I am on a stock GB 2.3.3 now) :
1. Root phone
2. Flash custom JB rom with CWM or ODIN.....or flash safe custom kernel first ? If so what custom kernel will fit stock GB 2.3.3
hereticnine said:
Hi HAXTREME,
I've flashed my SGS2 with Dorimanx kernel V7.27, which says that this version is safe kernel.
So can I flash a custom ROM like Resurrection Remix JB on my SGS2 - I9100 phone ?
How can I verify my phone is safe from brickbug issue ?
Regards,
Hereticnine.
Click to expand...
Click to collapse
First You have to chceck if You have brick bug chip with "emmc brickbug check" from Play Store or with app from this thread : http://forum.xda-developers.com/showpost.php?p=27014974&postcount=1
And You need to know which kernels are safe but I don't have exact info. The kernels that I mentioned earlier are safe.
F670ES said:
I am going to install custom JB and test a couple of custom kernels. But I'm not sure if all custom JB kernels are 100% safe ?
Btw will that procedure be safe for me (I am on a stock GB 2.3.3 now) :
1. Root phone
2. Flash custom JB rom with CWM or ODIN.....or flash safe custom kernel first ? If so what custom kernel will fit stock GB 2.3.3
Click to expand...
Click to collapse
You're on GB so none of those kernels will work for you.
You'd need to first flash stock 4.0.3 and then you can flash one of those kernels.
Or directly flash the leaked 4.1 stock JB. Like I said, AFAIK nobody has found it to be affected by the emmc bug so you should be safe flashing it. Else if you don't feel it safe, use the procedure I mentioned to install siyah, dori, etc.
Sent from my GT-I9100 using xda app-developers app
I went for the custom SlimBean + Siyah kernell and it's OK Now I wait for official 4.1.2.
HAXTREME said:
You're on GB so none of those kernels will work for you.
You'd need to first flash stock 4.0.3 and then you can flash one of those kernels.
Or directly flash the leaked 4.1 stock JB. Like I said, AFAIK nobody has found it to be affected by the emmc bug so you should be safe flashing it. Else if you don't feel it safe, use the procedure I mentioned to install siyah, dori, etc.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
This may be a bit of a n00b question, but I want to make sure I don't risk bricking my phone...
I have Android stock 4.0.4 on a non-rooted phone with the superbrick bug (damn!).
(Network unlocked Galaxy S2 GT-I9100 Android 4.0.4 stock image (downloaded via mobile internet),
Baseband I9100XXLQ6,
Kernel version 3.0.15-1056084 [email protected] #3 SMP PREEMPT Wed Aug 22 22:58:24 KST 2012,
Build number IMM76D.XWLPW.)
If I only want superuser access on the phone, what is the safest way of going about it? And is there a way of backing up absolutely everything on the phone including the hidden folders like /EFS etc in case I want to go back to the non-rooted version, or in case something goes wrong and I can still flash the phone?
I found a tutorial on teamandroid that looks the easiest to follow, it states to install Odin, then Download SiyahKernel Root I9100XWLPW, then flash/install, does this sound safe, or is there a risk of bricking my phone as I have 4.0.4 with the superbrick bug. (It's a simplified version of the tutorial as I cannot post links yet!)
PS I won't be updating the firmware after this.
Thanks in advance guys.
PS If I do need to flash the 4.0.3 or earlier, where can I find the official ROM's?
Hello, i'm new user of S II ! My new occasion phone are rooted by the first person.
Well, it's greet but i'would like tested the official roms of samsung.
Have you a link for the last official rom for flash but flash on recovery clock and keep this active!
Thanks a lot
Lioo (my first galaxy , bye bye xperia)
lioo said:
Hello, i'm new user of S II ! My new occasion phone are rooted by the first person.
Well, it's greet but i'would like tested the official roms of samsung.
Have you a link for the last official rom for flash but flash on recovery clock and keep this active!
Thanks a lot
Lioo (my first galaxy , bye bye xperia)
Click to expand...
Click to collapse
Visit www.sammobile.com/firmware
Download the official firmware for your country
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
Are you sure? The official rom... the root and the cwr stay alive after this?
lioo said:
Are you sure? The official rom... the root and the cwr stay alive after this?
Click to expand...
Click to collapse
You will lose Root and CWM recovery but you can root again with few minutes
Bho /// No way to update with the official rom pre-rooted? Damned!
I will read how root samsung galaxy... I hope it's easy lige xperia!
lioo said:
Bho /// No way to update with the official rom pre-rooted? Damned!
I will read how root samsung galaxy... I hope it's easy lige xperia!
Click to expand...
Click to collapse
1. there are prerooted + CWM recovery for ICS 4.0.3 unmodified stock firmwares
2. There are prerooted without CWM recovery for ICS 4.0.4 unmodified stock firmwares.
so which one do you want to go for?
I'll post links as soon as you reply
I don't know because, i'm the second users. The first ve install this custom rom (and i supposed, the good kernel for this one!)
http://forum.xda-developers.com/showthread.php?t=1194765
lioo said:
I don't know because, i'm the second users. The first ve install this custom rom (and i supposed, the good kernel for this one!)
http://forum.xda-developers.com/showthread.php?t=1194765
Click to expand...
Click to collapse
I seriously don't understand what you meant. Can you please explain better?
Are you presently running Sensation Rom?
You didn't answer my question in my previous post
Sent from my GT-I9100 using Tapatalk 2
Excuse me, i will be explain the situation :
- now the phone running Sensation rom (but it's an occasion phone, i've not install the custom rom)
- i would like test the last (4.04?) official rom of samsung and keep recovery for reinstall afer sensation rom or other great custom.
I hope it's a clean explain...
(i'm french native speaker)
ps: thanks for your help
lioo said:
Excuse me, i will be explain the situation :
- now the phone running Sensation rom (but it's an occasion phone, i've not install the custom rom)
- i would like test the last (4.04?) official rom of samsung and keep recovery for reinstall afer sensation rom or other great custom.
I hope it's a clean explain...
(i'm french native speaker)
ps: thanks for your help
Click to expand...
Click to collapse
Because, 4.0.4 has brick bug on its stock kernel, you only have two options.
1. Flash a prerooted ICS 4.0.4 firmware via CWM recovery, then flash a custom kernel via temporary CWM recovery.
2. Flash ICS 4.0.4 firmware via Odin. You will lose ROOT and CWM recovery, then flash a custom kernel via Odin to have ROOT and CWM recovery back.
Which option are you going for?
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
2. Flash ICS 4.0.4 firmware via Odin. You will lose ROOT and CWM recovery, then flash a custom kernel via Odin to have ROOT and CWM recovery back.
Click to expand...
Click to collapse
I'll choose this one. I search tuto. Why flash official rom via Odin and not kies?
Thanks
lioo said:
I'll choose this one. I search tuto. Why flash official rom via Odin and not kies?
Thanks
Click to expand...
Click to collapse
Odin is manual flashing. Kies can only help you update your phone (only when update is available)
Sent from my GT-I9100 using Tapatalk 2
I've flashed with odin but now, the phone bug bug bug...
I've a firmware from belgium but i think my kernel it's no good...
What's the solution?
lioo said:
I've flashed with odin but now, the phone bug bug bug...
I've a firmware from belgium but i think my kernel it's no good...
What's the solution?
Click to expand...
Click to collapse
Post your ROM and kernel details; Goto Settings , About phone and post everything you see
Sent from my GT-I9100 using Tapatalk 2
N° du modèle => gt-i9100
version android = 4.0.3
version bande passante : i9100xxlpw
version kernel = 3.0.15-i9100xwlpd-cl524746 [email protected] dell 154 # 3
n version = iml74k.xwlpd
___
Thanks
lioo said:
N° du modèle => gt-i9100
version android = 4.0.3
version bande passante : i9100xxlpw
version kernel = 3.0.15-i9100xwlpd-cl524746 [email protected] dell 154 # 3
n version = iml74k.xwlpd
___
Thanks
Click to expand...
Click to collapse
first perform a factory reset
Sent from my GT-I9100 using Tapatalk 2
So easy ! All's right!
Thanks!
I'm also second hand user of Galaxy S II and I got it with this ROM http://en.miui.com. *#1234# doesn't give me any info (don't know what PDA or CSC) so I don't know which stock Firmware to download from www.sammobile.com all I need is it to be in english, so what to download and flash with Odin....
thanks
Sent from my GT-I9100 using Tapatalk 2
sirkula said:
I'm also second hand user of Galaxy S II and I got it with this ROM http://en.miui.com. *#1234# doesn't give me any info (don't know what PDA or CSC) so I don't know which stock Firmware to download from www.sammobile.com all I need is it to be in english, so what to download and flash with Odin....
thanks
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
No problem.
That code will not work on non stock ROMs.
First, Goto Settings - About phone, and post everything you see
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
No problem.
That code will not work on non stock ROMs.
First, Goto Settings - About phone, and post everything you see
Click to expand...
Click to collapse
This is what I see in Settings - About phone....
Hi All,
I'm new to this forum.
Currently I'm using my SGS II with ICS Stock (4.0.4) upgraded through Samsung Kies (hope it clears that I've stock ROM).
My Baseband version : I9100DDLPB
Kernel Version : 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number : IMM76D.XWLPW
I've recently rooted my phone to flash the custom ROM.
But today i checked some posts from this forum that, flashing a SGS II running on Stock 4.0.4 may brick the handset here.
I read the complete post and got very much disappointed that I couldn't flash any custom ROM from my Stock ROM, but lastly I looked over the firmwares which have these emmc bug and found that my device is not in the list.
So with this information can anybody tell me whether I can go for flash the custom ROM ? or do I need to flash a new Kernel ? :angel:
Thanks,
Hereticnine.
If it's not listed as an 'insane chip' (affected by the emmc bug then it should be safe to wipe. But if you're gonna be flashing a custom ROM eventually,you may as well flash a custom kernel now itself. Just to be completely safe, ya know?
Sent from my GT-I9100 using xda app-developers app
install eMMC Check from Play Store, and see whether you have a faulty chip
Sent from my GT-I9100 using xda app-developers app
My Bad !!!!
Just now checked with an app available on Google Play, eMMC Brickbug Check and got the result as "Insane Chip".
Also tried with Got Brick bug found in this forum. It also said the same like DANGER !!! :crying: :crying:
So I think, customization is over for me !!!! I should stay out from flashing ROMs.
And HAXTREME, Thanks for the reply.
Thanks,
Hereticnine.
Flash a safe kernel which has MMC_CAP_DISABLED (e.g. siyah kernel) on your rom with odin. You will get yellow triangle but you can remove it later with triangle away if you want to
From that point on you can flash any custom rom you want or or do a wipe from cwm...
Key is making sure you're running a safe kernel all the time, then you should have no problems, as long as you flash roms which are compatible with I9100 international version
Lamien said:
Flash a safe kernel which has MMC_CAP_DISABLED (e.g. siyah kernel) on your rom with odin. You will get yellow triangle but you can remove it later with triangle away if you want to
From that point on you can flash any custom rom you want or or do a wipe from cwm...
Click to expand...
Click to collapse
So, there wouldn't be any problem if I flash with siyah kernel, Am I correct ? Or should I wait for some update from Samsung on fixing this bug.
Thanks,
Hereticnine.
hereticnine said:
So, there wouldn't be any problem if I flash with siyah kernel, Am I correct ? Or should I wait for some update from Samsung on fixing this bug.
Thanks,
Hereticnine.
Click to expand...
Click to collapse
Correct.
I would not wait for Samsung fixing anything in regards of this matter. The community has brought this huge issue to their attention long time ago and nontheless they released / keep releasing (?) dangerous updates to their customers!
Elite Recognized Developer "Entropy512" has written a very interesting (and long!) story of his experiences with Samsung:
https://plus.google.com/u/0/101093310520661581786/posts/cdPnNjLAb4F
hereticnine said:
So, there wouldn't be any problem if I flash with siyah kernel, Am I correct ? Or should I wait for some update from Samsung on fixing this bug.
Thanks,
Hereticnine.
Click to expand...
Click to collapse
No problems flashing siyah because emmc bug is disabled.
AS to an update from Samsung I do not believe there will be one as they are releasing Jellybean by the endof the year,
JB uses a totally different file structure.
Cosmic Blue said:
No problems flashing siyah because emmc bug is disabled.
Click to expand...
Click to collapse
Dorimanx is safe too
Sent from my Nexus 7 using xda premium
Thank you All for your replies.
I've downloaded the latest Siyah Kernel, I'll try to flash it and hope it goes without any issues.
Please tell me if I need to take care of anything else while flashing Siyah Kernel.
I did the nandroid backup & took all other back ups using Titanium.
Hope it suffices for flashing.
Thank you.
Regards,
Hereticnine.
Well, about the brick bug, I just know there's a app to detect the chip and unfortunately my phone has the insane chip. but if I'm not mistaken I've been wiped my phone several times with 4.0.4 stock kernel before yet it's still safe till now, it's the checker or I'm just being lucky? but nevermind there's leaked 4.1.2 now haha..
andiprbwo said:
Well, about the brick bug, I just know there's a app to detect the chip and unfortunately my phone has the insane chip. but if I'm not mistaken I've been wiped my phone several times with 4.0.4 stock kernel before yet it's still safe till now, it's the checker or I'm just being lucky? but nevermind there's leaked 4.1.2 now haha..
Click to expand...
Click to collapse
AFAIK the brick bug is non-deterministic. So you could wipe data several times without a problem n suddenly one time you try it n your phone is a rather expensive paperweight. If your phone indeed has an 'insane chip' count yourself lucky and don't risk it too often.
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
AFAIK the brick bug is non-deterministic. So you could wipe data several times without a problem n suddenly one time you try it n your phone is a rather expensive paperweight. If your phone indeed has an 'insane chip' count yourself lucky and don't risk it too often.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
well, yeah after I read some thread about it I won't ever do that stupid things again
hereticnine said:
Hi All,
I'm new to this forum.
Currently I'm using my SGS II with ICS Stock (4.0.4) upgraded through Samsung Kies (hope it clears that I've stock ROM).
My Baseband version : I9100DDLPB
Kernel Version : 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number : IMM76D.XWLPW
I've recently rooted my phone to flash the custom ROM.
But today i checked some posts from this forum that, flashing a SGS II running on Stock 4.0.4 may brick the handset here.
I read the complete post and got very much disappointed that I couldn't flash any custom ROM from my Stock ROM, but lastly I looked over the firmwares which have these emmc bug and found that my device is not in the list.
So with this information can anybody tell me whether I can go for flash the custom ROM ? or do I need to flash a new Kernel ? :angel:
Thanks,
Hereticnine.
Click to expand...
Click to collapse
Just flash PhilZ kernel .. Its totally safe .. Just download the right kernel and flash it through stock recovery and it would be fine
Sent from my GT-I9100 using Tapatalk 2
GALicer evening
kilometers4 said:
Dorimanx is safe too
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Hi kilometers4,
Thanks for the information, can you please share me the link, where can I get this kernel latest version for S2 ?
Thanks,
Hereticnine.
Yipee !!
Today I flashed PhilZ Kernel & later tried Dorimanx Kernel too.
I like the Dorimanx kernel, it has several options.
BTW, how can I check / ensure that I'm free from Brickbug now ??
Regards,
Hereticnine.
hereticnine said:
Yipee !!
Today I flashed PhilZ Kernel & later tried Dorimanx Kernel too.
I like the Dorimanx kernel, it has several options.
BTW, how can I check / ensure that I'm free from Brickbug now ??
Regards,
Hereticnine.
Click to expand...
Click to collapse
you will never be totally free of the brick bug, since it is embedded in the kernal. Developers of Philz, Dorimanx and others have edit the code that cause the brick bug to disable it.
When flashing avoid using any stock kernal from 4.0.4 and above to avoid the embedded brick bug software.