Guys,
Did anyone had luck flashing CM9 RC1 on Xperia Ray?
I'm struggling to get this working.
kgthenerd said:
Guys,
Did anyone had luck flashing CM9 RC1 on Xperia Ray?
I'm struggling to get this working.
Click to expand...
Click to collapse
i've tryied some time before, it works, but if i remember well i need to flash the fxp128 kernel.
paolinhos said:
i've tryied some time before, it works, but if i remember well i need to flash the fxp128 kernel.
Click to expand...
Click to collapse
That's lame.
I remember that I could use CM7 ROMs in my old Xperia X8 with stock kernel. It was a stupid move trying to unlock the bootloader to change kernel, I just bricked my phone.
I have tried, but it has some problems (automatic light sensor doesn't work for me) and wifi drops signal sometimes. Stay @ fxp 9.0 :cyclops:
El Brillantinas said:
That's lame.
I remember that I could use CM7 ROMs in my old Xperia X8 with stock kernel. It was a stupid move trying to unlock the bootloader to change kernel, I just bricked my phone.
Click to expand...
Click to collapse
You can use cm7 with stock kernel?
Really?
paolinhos said:
You can use cm7 with stock kernel?
Really?
Click to expand...
Click to collapse
I was running XRay Kernel on stock rom
it was good but i need CM9. But for some reason it is not working
paolinhos said:
You can use cm7 with stock kernel?
Really?
Click to expand...
Click to collapse
Yes, I did when I had my Xperia X8 alive. Check their section, they have a lot of ROMs based in CM7 Android 2.3.7 that work in stock kernel.The only neccesary things are root and CMW.
As I said, my big error was trying to unlock the bootloader just to use a ROM that needed a custom kernel, I don't know why I did it when other ROMs always worked fine, like GingerDX... I bricked my X8 forever, that's why I bought my Ray and I won't mess with the bootloader again.
I guess is due the different kernel architectures, or it's because SONY allowed to unlock bootloaders on the Xperia 2011 line, but it's very disappointing that most of the ROMs for Xperia Ray need unlocked bootloaders and customized kernels. That's why Hybrid 3.2, Superleggera and MIUI for locked bootloaders are a bless for us. @JJ Doctor, @arcatarc and @OatnezrA are true heroes :good:
El Brillantinas said:
Yes, I did when I had my Xperia X8 alive. Check their section, they have a lot of ROMs based in CM7 Android 2.3.7 that work in stock kernel.The only neccesary things are root and CMW.
As I said, my big error was trying to unlock the bootloader just to use a ROM that needed a custom kernel, I don't know why I did it when other ROMs always worked fine, like GingerDX... I bricked my X8 forever, that's why I bought my Ray and I won't mess with the bootloader again.
I guess is due the different kernel architectures, or it's because SONY allowed to unlock bootloaders on the Xperia 2011 line, but it's very disappointing that most of the ROMs for Xperia Ray need unlocked bootloaders and customized kernels. That's why Hybrid 3.2, Superleggera and MIUI for locked bootloaders are a bless for us. @JJ Doctor, @arcatarc and @OatnezrA are true heroes :good:
Click to expand...
Click to collapse
Dont know mate, I got ray and neo v on my table ready to get out of sony stock and for some reason i just cant install it on them.
May be i will never by an another sony phone again :angel:
In last 12hrs i tried almost everything, flashed FXP129 CM9 no luck, tried to flash official cm9 rc1 same thing no damn luck.
this ray is booloader unlocked via s1tool, rooted and has cwm recovery but i still cant flash any rom on it. It's frustrating :silly:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
-Jesco- said:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
Click to expand...
Click to collapse
as i say...
-Jesco- said:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
Click to expand...
Click to collapse
Thanks for the info mate, Now i'm on JJHybrid ROM with sirkay's XRay kernel. Working good lets see what happens :victory:
kgthenerd said:
Dont know mate, I got ray and neo v on my table ready to get out of sony stock and for some reason i just cant install it on them.
May be i will never by an another sony phone again :angel:
In last 12hrs i tried almost everything, flashed FXP129 CM9 no luck, tried to flash official cm9 rc1 same thing no damn luck.
this ray is booloader unlocked via s1tool, rooted and has cwm recovery but i still cant flash any rom on it. It's frustrating :silly:
Click to expand...
Click to collapse
What if you try to re-lock your bootloader?
Related
Hi dears!
I would like to know if I can install and Custom rom or a kernel to overlock my Xperia Neo, with CMW and locked bootloader.
Thanks for your time guys
Kind Regards,
Ghafit
you can install a custom rom(rom should be converted to recovery image file) , but kernel cannot be installed on locked bootloader...
so, with stock kernel for example, can I install CM7, do you recommend that to me?
Nope, don't try that... you need a custom kernel for CM7 or MIUI roms.
and there aren't anymore nice custom roms with stock kernel?
Ghafit said:
and there aren't anymore nice custom roms with stock kernel?
Click to expand...
Click to collapse
SE.Tweaked 0.7
Sent from my MT15i
taaviu said:
SE.Tweaked 0.7
Sent from my MT15i
Click to expand...
Click to collapse
do you recommend me to install that ROM?
yes you can try that but , users with locked bootloader when installed this rom face SU binary problems & wifi not working....(http://forum.xda-developers.com/showthread.php?t=1281489&page=36)
NOTE : it is not the problem of rom , works perfectly on unlocked BL
touchscreen work fix work, flash hybrom v5
http://forum.xda-developers.com/showthread.php?t=1423562 FIX-work
screen-OK
Thank you very much to all.
what is your devices actually ? sk17i (mini pro) or st15i (mini) ?
just make sure you are download the correct file ..
bambis880 said:
touchscreen nod found touch
seus update -yes not found
fix -- http://forum.xda-developers.com/showthread.php?t=1423562 - yes nod found
please help me
Sorry my English is easy Google translator
Click to expand...
Click to collapse
have u make any backup before flashing the rom?
i also try that rom on my sk17i XMP, but it stucked in SE watermark on 1st boot.. i need to reflash back to stock rom-.-'
StereO_ said:
have u make any backup before flashing the rom?
i also try that rom on my sk17i XMP, but it stucked in SE watermark on 1st boot.. i need to reflash back to stock rom-.-'
Click to expand...
Click to collapse
if you were stucked in SE bootanimation on first boot, try to restart the phone ..
if it didn't solve the problem, it might be the kernel and firmware is your problem that doesn't support hybrom v11
i recommended you to flash .62 firmware using flashtool, then flash KRsH kernel v3.0 from here. After that install hybrom v11 via CWM
I've been try on my sk17i and it is 100% works
______________
My devices has unlocked bootloader, so I don't know if this ways might be not working in locked bootloader
OK work
phazax said:
if you were stucked in SE bootanimation on first boot, try to restart the phone ..
if it didn't solve the problem, it might be the kernel and firmware is your problem that doesn't support hybrom v11
i recommended you to flash .62 firmware using flashtool, then flash KRsH kernel v3.0 from here. After that install hybrom v11 via CWM
I've been try on my sk17i and it is 100% works
______________
My devices has unlocked bootloader, so I don't know if this ways might be not working in locked bootloader
Click to expand...
Click to collapse
yes, what i will 1st to do is to unlock bootloader in order to use hybrom_v11 , but im considering my phone warranty will be avoided.
Guys what kernel is better for this rom?
Tyrigi said:
Guys what kernel is better for this rom?
Click to expand...
Click to collapse
flash KRsH kernel v3.0 from here
StereO_ said:
flash KRsH kernel v3.0 from here
Click to expand...
Click to collapse
Info: 1,6ghz or 2,00ghz? I lost my apps-data? It's good for hybroom? Can I reset my sd card after installed? Thanks a lot sorry for a lot questions.
Regards Tyrigi.
now im using this http://forum.xda-developers.com/showthread.php?t=1349630 who is better?
Tyrigi said:
Info: 1,6ghz or 2,00ghz? I lost my apps-data? It's good for hybroom?
Click to expand...
Click to collapse
any version u can use, but use at your own risk.
no, your apps-data will not lost.
yes, because KRsH Kernel v3.0 is optimized for XMP.
Tyrigi said:
Can I reset my sd card after installed? Thanks a lot sorry for a lot questions.
Regards Tyrigi.
now im using this http://forum.xda-developers.com/showthread.php?t=1349630 who is better?
Click to expand...
Click to collapse
installed kernel modules will not affected sd card data, so no need to reset.
its same what im gave to u-.-
StereO_ said:
any version u can use, but use at your own risk.
no, your apps-data will not lost.
yes, because KRsH Kernel v3.0 is optimized for XMP.
installed kernel modules will not affected sd card data, so no need to reset.
its same what im gave to u-.-
Click to expand...
Click to collapse
Thanks for reply i've installed 1,6ghz kernel you?
i not install any modelus kernel, because i dont want unlock bootloader, im considering my phone warranty
StereO_ said:
i not install any modelus kernel, because i dont want unlock bootloader, im considering my phone warranty
Click to expand...
Click to collapse
You can lock later the bootloeader lol
Tyrigi said:
You can lock later the bootloeader lol
Click to expand...
Click to collapse
once u unlock bootloader your warranty will be avoided because it wipe all drm data even though u relock it back.
CLOSED
it's good to see another DEV joining & enlightening our NEO V Family
i'm on cm9 will try when i am on stock , GREAT WORK THNX
Thanks DEV for developing this kernel as i just tested it on my NEO V on STOCK ROM .62 & it works flawlessly ......
Thanks
Download link not working.
Here is the download link - http://www.mirrorcreator.com/files/0XV5EK6H/kernel.img_links
archijit said:
Download link not working.
Click to expand...
Click to collapse
The link is working fine.I just checked it.
wi fi error with emannxperia rom.
archijit said:
wi fi error with emannxperia rom.
Click to expand...
Click to collapse
The error is probably with the rom and not with the kernel, because with the stock rom works perfectly...
After flashing this kernel my neo v gets rooted on .62 stock ROM ....
but will this rooted ROM work if i change the kernel to something else like nightelf stock kernel .... ???
or have anyone tested it yet ???
let me know ....
piku2008 said:
After flashing this kernel my neo v gets rooted on .62 stock ROM ....
but will this rooted ROM work if i change the kernel to something else like nightelf stock kernel .... ???
or have anyone tested it yet ???
let me know ....
Click to expand...
Click to collapse
Root privileges are integrated in this kernel.So you will not stay rooted almost for sure, if you flash another kernel which is not prerooted...
bbooff said:
Root privileges are integrated in this kernel.So you will not stay rooted almost for sure, if you flash another kernel which is not prerooted...
Click to expand...
Click to collapse
But unfortunately i gave it a try and changed it to nightelf stock kernel 9_0 & rooting is still working ......
piku2008 said:
But unfortunately i gave it a try and changed it to nightelf stock kernel 9_0 & rooting is still working ......
Click to expand...
Click to collapse
Nightelf stock kernel 9_0 is prerooted too...
Thanks this post . I am get root privileges on my neo v. I want to ask , Can i upgrade to android 4.0 official using Sony PC Companion. If android 4.0 is available to update . It can errror or not ?
quachvidat said:
Thanks this post . I am get root privileges on my neo v. I want to ask , Can i upgrade to android 4.0 official using Sony PC Companion. If android 4.0 is available to update . It can errror or not ?
Click to expand...
Click to collapse
You will be able to update normally to ICS using PC companion, but to be ablolutely sure, you better relock your bootloader before the update...
@bbooff: few days ago I flashed ICS beta from sony page, and I used your kernel for hot boot just so I can install zip with superuser stuff.
Today I flashed stock .62fw, and wanted to hot boot with your kernel, but no luck, I needed to flash it in order to boot into CWM.
You got any idea why id did cooperate on ICS and not on clean .62
Also I couldn't do factory reset while I was using your kernel. I guess that is kinda normal as it's not stock kernel, but still I thought it should work
Madfysh said:
@bbooff: few days ago I flashed ICS beta from sony page, and I used your kernel for hot boot just so I can install zip with superuser stuff.
Today I flashed stock .62fw, and wanted to hot boot with your kernel, but no luck, I needed to flash it in order to boot into CWM.
You got any idea why id did cooperate on ICS and not on clean .62
Also I couldn't do factory reset while I was using your kernel. I guess that is kinda normal as it's not stock kernel, but still I thought it should work
Click to expand...
Click to collapse
I have no idea!
The opposite is what should had happened.
I think that if you reinstall 0.62 (using flashtool and not wotan) and then my kernel, everything will be o.k.
If you install a custom kernel, you can do a factory reset through the cwm menu.
bbooff said:
I have no idea!
The opposite is what should had happened.
I think that if you reinstall 0.62 (using flashtool and not wotan) and then my kernel, everything will be o.k.
Click to expand...
Click to collapse
Actually I did used flashtool.
After I flash your kernel I can enter cwm. problem is if I try hot boot it.
and about factory reset, I know we can do it via recovery, but is it normal that we can't do it from phone?
Madfysh said:
Actually I did used flashtool.
After I flash your kernel I can enter cwm. problem is if I try hot boot it.
and about factory reset, I know we can do it via recovery, but is it normal that we can't do it from phone?
Click to expand...
Click to collapse
What exactly do you mean by "hot boot"?
It is normal that you can't do it.
bbooff said:
What exactly do you mean by "hot boot"?
Click to expand...
Click to collapse
fastboot boot boot.img
it allows you to boot with kernel without flashing it.
your kernel is very good.... simple and easy... helped me restore my phone back...
But now i am facing one more problem...
whenever I try to install any other kernel through fastboot, that kernel does not work; instead your kernel starts booting up...
Can you please throw some light on it?
Thnx
I have SE stock rom 2.1 update 1 with stock kernel on my x10i mini. I have rooted my device and I want to know if I can enable multitouch on my phone. Please someone help me .
Thanks in advance...
I didnt try only kernel,but I try custom MINICM7-2.2.0 based on GB 2.3.7 and it is like new phone reBORN, fast&stable.
Sort off, yes
Check this
For stock kernel
The links are dead.. Downloading of x8gesture.ko not working.
SmG67 said:
Sort off, yes
Check this
For stock kernel
Click to expand...
Click to collapse
downloading not working of x8gesture.ko
In that case, there are a few froyo-based roms (srom-froyo, froyobread) that include this particular module, don't know if those links are still working, try to search the x10mini development forum to find them
SmG67 said:
In that case, there are a few froyo-based roms (srom-froyo, froyobread) that include this particular module, don't know if those links are still working, try to search the x10mini development forum to find them
Click to expand...
Click to collapse
Do they require unlocking of bootloader .Actually I am afraid of this purpose.Is there any GB rom that can be flashed without unlocking bootloader on stock kernel 2.6.29 Thanks for Help.
You only need to unlock your bootloader if you need a custom kernel.
All the froyo roms run on the stock kernel, so they can be installed without unlocking the bootloader.
GB roms all run on a custom kernel (on the x10Mini), so you need to unlock the bootloader for that.
If you get S1Tool and post the output, i could probably provide you with some guidance on the safety of unlocking
SmG67 said:
You only need to unlock your bootloader if you need a custom kernel.
All the froyo roms run on the stock kernel, so they can be installed without unlocking the bootloader.
GB roms all run on a custom kernel (on the x10Mini), so you need to unlock the bootloader for that.
If you get S1Tool and post the output, i could probably provide you with some guidance on the safety of unlocking
Click to expand...
Click to collapse
Yeah !! in the output It shows SEMC something with capital R . Actually date is 10w29. Flashtool is big file and I have a slow connection... Smthng else for unlocking bootloader
it should say semc-simlock certificate, and 10w29 is ok too. you can get the manual scripts for unlocking the bootloader in a slightly smaller package, but the point about unlocking the bootloader is to install a custom kernel... you will need flashtool for that... lol.
I would say, try one of the froyo roms if they're still available, i'm pretty sure froyobread with the hotfix can be downloaded and they can be installed on the stock kernel. but then, those are big downloads too on a slow connection
SmG67 said:
it should say semc-simlock certificate, and 10w29 is ok too. you can get the manual scripts for unlocking the bootloader in a slightly smaller package, but the point about unlocking the bootloader is to install a custom kernel... you will need flashtool for that... lol.
I would say, try one of the froyo roms if they're still available, i'm pretty sure froyobread with the hotfix can be downloaded and they can be installed on the stock kernel. but then, those are big downloads too on a slow connection
Click to expand...
Click to collapse
Ok I am starting... Given 30 minutes to my wintage phone,
Thanks for paying attantion..
yupp its done ..XDA rocks B-)
You're welcome
Array. I've unlocked the bootloader and I have xrecovery on my phone. I also have put GB miniCM rom as update.zip on SD card
Now the problem is on GB thread it said that I should have naA kernel on my phone and on naA kernel thread it said that I should have GB custom rom. I have only unlocked the bootloader and still on stock rom and stock kernel.,
once again its ur turn to sort me out of this problem...
:-D
First you flash the nAa kernel using flashtool
Then flash the rom through cwm
Sent from my E10i using xda premium
Bro I have gone one step ahead and have installed cloclwordmod .. now I am flashing the naA kernel... But what after flashing the kernel if I start my phone do I have to first enter in CWM and flash new minicm7 rom or I can use this kernel on my stock rom 2.1
Go into CWM and install MiniCM, stock will not boot on the nAa kernel.
SmG67 said:
Go into CWM and install MiniCM, stock will not boot on the nAa kernel.
Click to expand...
Click to collapse
Done ;-)
hello
i have: Xperia mini SK17i - XPERIA X10 mini pro2 - mango
i first flashed it with flashtool, then rooted it with (DooMLoRD_v4_ROOT-zergRush-busybox-su)
after, i flashed a custom kernel (to get recovery), then i flashed a custom rom
but the problem is the phone will reboot after few minutes and keep rebooting
i tried all these kernels:
KernelPanic_v1.25_SK17
mesa
rage
and all these roms:
RealICS
Xperia_icecream pureness
cm-9.1.0-mango (and it didn't work)
DeliciousSandwich1.0
and others
but with all i get the same problem
help please
ARDV said:
hello
i have: Xperia mini SK17i - XPERIA X10 mini pro2 - mango
i first flashed it with flashtool, then rooted it with (DooMLoRD_v4_ROOT-zergRush-busybox-su)
after, i flashed a custom kernel (to get recovery), then i flashed a custom rom
but the problem is the phone will reboot after few minutes and keep rebooting
i tried all these kernels:
KernelPanic_v1.25_SK17
mesa
rage
and all these roms:
RealICS
Xperia_icecream pureness
cm-9.1.0-mango (and it didn't work)
DeliciousSandwich1.0
and others
but with all i get the same problem
help please
Click to expand...
Click to collapse
This is the wrong section. Post it in the General Section.
andogeek10 said:
This is the wrong section. Post it in the General Section.
Click to expand...
Click to collapse
just report the thread and stop pushing it
EDIT:
not ending reboots
Click to expand...
Click to collapse
nice name for a rom
Untot said:
just report the thread and stop pushing it
EDIT:
nice name for a rom
Click to expand...
Click to collapse
...............
sorry for the wrong place, hope that the thread will be moved
Hmm, you didn't mention that you had unlocked your bootloader.. I guess you did it, if no, then there is te problem..
pastillero said:
Hmm, you didn't mention that you had unlocked your bootloader.. I guess you did it, if no, then there is te problem..
Click to expand...
Click to collapse
i've unlocked it, i got a key from their website and inserted it to unlock it
ARDV said:
i've unlocked it, i got a key from their website and inserted it to unlock it
Click to expand...
Click to collapse
Okay. then, do this.
Choose any ROM you like.
Flash via Flashtools base firmware(If you choose a GB rom then Flash any Gingerbread Stock Firmware, if you choose an ICS then flash any ICS Stock Firm..)
Flash any compatible kernel
Turn your phone on and enter cwm Recovery
Flash te ROM and do all wipes that ROM requires(its on OP of the ROM you 've selected)
Reboot and hope it works well!
Hope this can solve your problem
pastillero said:
Okay. then, do this.
Choose any ROM you like.
Flash via Flashtools base firmware(If you choose a GB rom then Flash any Gingerbread Stock Firmware, if you choose an ICS then flash any ICS Stock Firm..)
Flash any compatible kernel
Turn your phone on and enter cwm Recovery
Flash te ROM and do all wipes that ROM requires(its on OP of the ROM you 've selected)
Reboot and hope it works well!
Hope this can solve your problem
Click to expand...
Click to collapse
if i flash a stock firmware via flashtool, will i lose the root?
if yes i may try this: http://forum.xda-developers.com/showthread.php?t=1907994
ARDV said:
if i flash a stock firmware via flashtool, will i lose the root?
if yes i may try this: http://forum.xda-developers.com/showthread.php?t=1907994
Click to expand...
Click to collapse
Yes, you will lose root access
bushido24 said:
Yes, you will lose root access
Click to expand...
Click to collapse
that's a problem,
how can i fix this without loosing root?
because the root i've done doesn't work with all roms
i found this rom:
http://forum.xda-developers.com/showthread.php?t=1796272
the developer posts the baseband link, do i need to change it? and may it have relation with my problem?
and what about lossing root with that rom?
ARDV said:
that's a problem,
how can i fix this without loosing root?
because the root i've done doesn't work with all roms
i found this rom:
http://forum.xda-developers.com/showthread.php?t=1796272
the developer posts the baseband link, do i need to change it? and may it have relation with my problem?
and what about lossing root with that rom?
Click to expand...
Click to collapse
FYI : if you already unlock the bootloader, you don't have to root it anymore....just flash any custom kernel into your phone...all custom kernel is pre-rooted and have CWM be default....
flash any custom kernel first, then you can install any custom roms or official roms with losing your root....
hello, do u fix it? i have similar problem with original firms. with android 4.0 doesnt work, its start rebooting and downgroun in 2.3.4 works better but its reboot too.
how can i do???
thanks
sorry for my poor english.
if there have any apk inside ur sdext also will make this happen too..
Sent from my Xperia Ray
dont overclock it or keep eye on temperature
ARDV said:
hello
i have: Xperia mini SK17i - XPERIA X10 mini pro2 - mango
i first flashed it with flashtool, then rooted it with (DooMLoRD_v4_ROOT-zergRush-busybox-su)
after, i flashed a custom kernel (to get recovery), then i flashed a custom rom
but the problem is the phone will reboot after few minutes and keep rebooting
i tried all these kernels:
KernelPanic_v1.25_SK17
mesa
rage
and all these roms:
RealICS
Xperia_icecream pureness
cm-9.1.0-mango (and it didn't work)
DeliciousSandwich1.0
and others
but with all i get the same problem
help please
Click to expand...
Click to collapse
dont over clock it upto 1Ghz and keep eye on temperature of phone
kazim.asghar said:
dont over clock it upto 1Ghz and keep eye on temperature of phone
Click to expand...
Click to collapse
Dude what do u mean by oc upto 1GHz. Our phones default frequency is 1GHz and its not called oc and btw oc upto 1.4GHz is safe(though I don't recommend oc at all).
Press THANKS if I helped,
Best Regards,
AJ
kazim.asghar said:
dont over clock it upto 1Ghz
Click to expand...
Click to collapse
Will any one be against me if I post a face palm?
ARDV said:
that's a problem,
how can i fix this without loosing root?
because the root i've done doesn't work with all roms
i found this rom:
http://forum.xda-developers.com/showthread.php?t=1796272
the developer posts the baseband link, do i need to change it? and may it have relation with my problem?
and what about lossing root with that rom?
Click to expand...
Click to collapse
Just use Doomlord Rooting Kit and you will get root in no time and Flash .42 GB Rom and I wud suggest Rage Kernel 3.0 for GB