Related
Hello,
Last 2-3 weeks a have this strange problem with my phone, when i turn on wifi, the box continiiusly loops ticking and unticking and goes on off without stopping.
I thought initially that this was a problem of the specific rom for Motorola Milestone. But when i installed the initial sbf of the phone, nothing changed :-(
Anyine experienced in the past this issue? Unfortunately this is a reason to change phone and i dont want to buy a new one now...
Thanks in advance
Sent from my NookColor using Tapatalk
It seems that a lot of other users had / have this problem, however i dont know what to do - especially with the wifi-lock help below
http://code.google.com/p/android/issues/detail?id=9677
http://www.htcdesireforum.com/htc-de...g-android-2-2/
http://androidforums.com/captivate-a...i-problem.html
I suppose i am the only user on xda that has this error... :-(
Sent from my NookColor using Tapatalk
A bit dissapointing that there is no help on this :-(
I suppose i should start searching for a new phone.
Sent from my NookColor using Tapatalk
Anyone please? :-(
Sent from my NookColor using Tapatalk
Fekish said:
Anyone please? :-(
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Have you tried installing a new rom?
WiFi - On/Off
I suspect it has something to do with the ROM/HW interface. I would do a complete wipe of your phone back to stock factory settings.
Does it do the same thing on the factory wipe?
Is your problem confined to 1 hotspot or WiFi device or all devices to attempt to attach to?
If the problem continues on the factory ROM and factory settings I would suspect a hardware issue.
ALSO you could try upgrading/downgrading your MODEM to a different one and see if that helps.
Thanks, i really appreicate it guys!
i installed different roms, wiped everything, went back to stock and nothing...
Wifi goes on and off without showing what networks are available.
How to change moden?
Sent from my NookColor using Tapatalk
I had the same Problem with a few ROM's but now I Found CoreDruid for my HTC Desire HD and that problem is history.
When it happens, just reboot!
Fekish said:
Thanks, i really appreicate it guys!
i installed different roms, wiped everything, went back to stock and nothing...
Wifi goes on and off without showing what networks are available.
How to change moden?
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Does that problem occur on a custom rom?
Theonew said:
Does that problem occur on a custom rom?
Click to expand...
Click to collapse
On all custom roms, and atock ones.
Sent from my NookColor using Tapatalk
Have you tried switching ON the OFFLINE mode (Airplane mode) and then switch off OFFLINE mode?? It helps in my Photon...
Further you can try turning WiFi Hotspot On and then Off... Heard that this method also solves WiFi issues in some MoPhos....
Third solution for MoPho, I am not sure it will work for MileStone or not.... goto https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/77706
Please provide some log files, when you turn of wifi: logcat and dmesg. You can get it using app like Quick System Info, or get them using adb.
Try doing this.
Go to Advanced wifi settings and uncheck "Use static IP" .
Hello,
attached is the logcat.
Thanks everyone for spending time in my problem!
From what i see from your log file:
E/wpa_supplicant(19421): ERROR - wpa_driver_tista_private_send - error sending Wext private IOCTL to STA driver (ioctl_cmd = 800508, res = 1, errno = 25)
E/wpa_supplicant(19421): ERROR - Failed to get mac address!
D/WifiStateTracker( 2569): Reset connections and stopping DHCP
I/wpa_supplicant(19421): CTRL-EVENT-STATE-CHANGE id=-1 state=2 BSSID=00:00:00:00:00:00
V/WifiMonitor( 2569): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=2 BSSID=00:00:00:00:00:00]
E/wpa_supplicant(19421): ERROR - wpa_driver_tista_private_send - error sending Wext private IOCTL to STA driver (ioctl_cmd = 8021501, res = 1, errno = 100)
E/wpa_supplicant(19421): ERROR - Failed to do tista scan!
W/wpa_supplicant(19421): Failed to initiate AP scan.
D/WifiStateTracker( 2569): Disabling interface
E/wpa_supplicant(19421): ERROR - wpa_driver_tista_private_send - error sending Wext private IOCTL to STA driver (ioctl_cmd = 8000001, res = -1, errno = 19)
E/wpa_supplicant(19421): ERROR - Failed to start driver!
I/wpa_supplicant(19421): CTRL-EVENT-DRIVER-STATE HANGED
V/WifiMonitor( 2569): Event [CTRL-EVENT-DRIVER-STATE HANGED]
D/wifi ( 2569): wifi doCommand: ret=-1
Click to expand...
Click to collapse
ioctl system calls fail with different errors. Ioctl is used for controlling the device, WiFi chip in your case. Errors mean that either driver is not ok but if you have original rom it shouldn't be the case, or device itself is not operational.
So probably your have a hardware failure.
You can also try with some unencrypted wifi, maybe the problem occurs in WPA mode only.
ok thanks
first time i heard a broken wifi, but it seems that is time for a new phone!
After realising the player won't connect to my Skype Phone S2 to nick the internet, I did a bit of "hacking":
1) Rooted the device
2) Installed Nook Color Bluetooth Tether from Google Play
3) After realising Nook Color is not working, tried running pand --connect, got "Failed to open control socket: Protocol not supported" error message
4) Dowloaded the Samsung kernel source and cross-compiled it to get the missing bnep.ko module for my kernel version.
5) Successfully inserted the mod (lsmod reports live). However pand --connect [address] does not return anything, neither does pand -l
I am running out of ideas how to get the player to connect to the skypephone. Any ideas?
I bought the player as a replacement of hx4700 (released in 2004), which was able to tether with my skypephone easily. I still can not believe that this modern device is lacking the feature.
a.fiodorov said:
After realising the player won't connect to my Skype Phone S2 to nick the internet, I did a bit of "hacking":
1) Rooted the device
2) Installed Nook Color Bluetooth Tether from Google Play
3) After realising Nook Color is not working, tried running pand --connect, got "Failed to open control socket: Protocol not supported" error message
4) Dowloaded the Samsung kernel source and cross-compiled it to get the missing bnep.ko module for my kernel version.
5) Successfully inserted the mod (lsmod reports live). However pand --connect [address] does not return anything, neither does pand -l
I am running out of ideas how to get the player to connect to the skypephone. Any ideas?
I bought the player as a replacement of hx4700 (released in 2004), which was able to tether with my skypephone easily. I still can not believe that this modern device is lacking the feature.
Click to expand...
Click to collapse
Are you running pand from the Player? What does logcat show after? Are you running stock rom? Does "netcfg" show a bnep0 device?
If you have a 5.0, I can confirm that I've gotten bluetooth networking working using the CM7 ROM in the development section.
Thank you for informing me about CM7, but current alpha is not good for me though. I ll keep checking the progress.
logcat showed:
"E/pand (22197): Connect to 00:12:40:53:AC:A4 failed. No route to host(113)"
bnep0 is missing from netcfg output.
You think that uploading the compiled kernel, with bnep.ko might solve it?
a.fiodorov said:
Thank you for informing me about CM7, but current alpha is not good for me though. I ll keep checking the progress.
logcat showed:
"E/pand (22197): Connect to 00:12:40:53:AC:A4 failed. No route to host(113)"
bnep0 is missing from netcfg output.
You think that uploading the compiled kernel, with bnep.ko might solve it?
Click to expand...
Click to collapse
I could be wrong, but I didn't think stock gingerbread android bluetooth stack supported networking. I know ICS does. But then again if pand is available..
Is hciconfig there? What does hciconfig -a show?
BlueZ
BlueZ (hciconfig) is not installed.
pand is from /system/bin, so it's not from BusyBox, which is in /system/xbin in my case.
How can I test that the bnep module is functioning?
P.S. might be easer to go for CM7, but I am running exactly the same kernel CM requires: rj13 (for international).
a.fiodorov said:
BlueZ is not installed.
pand is from /system/bin, so it's not from BusyBox, which is in /system/xbin in my case.
How can I test that the bnep module is functioning?
P.S. might be easer to go for CM, but I am running exactly the same kernel CM requires: rj13 (for international). So I am not convinced other rom is necessarily.
Click to expand...
Click to collapse
There's more to it than just loading the bnep module. It will be pretty tough to figure out what's going on without hciconfig/hcitool/l2ping. You could try
Code:
cat /sys/class/bluetooth/hci0/class
With CM7 bluetoothd this shows 0x5a020c on my player. The third byte (0x5a) shows the service classes supported, and the second bit is whether Networking is supported.
@ambrice,
Just realised that it's you who ported CM7. Kudos!
I am very tempted to try bluetooth tethering from CM7, could you address my concern that I will be running the same kernel (rj13), so how will ROM be able to fix my (possibly) not working bnep0?
>>cat /sys/class/bluetooth/hci0/class
cat: can't open '/sys/class/bluetooth/hci0/class': No such file or directory
a.fiodorov said:
@ambrice,
Just realised that it's you who ported CM7. Kudos!
I am very tempted to try bluetooth tethering from CM7, could you address my concern that I will be running the same kernel (rj13), so how will ROM be able to fix my (possibly) not working bnep0?
>>cat /sys/class/bluetooth/hci0/class
cat: can't open '/sys/class/bluetooth/hci0/class': No such file or directory
Click to expand...
Click to collapse
There is a userspace component to setting up bluetooth networking. It's not all done by the bnep module.
It's weird that you have no hci0. Is your bluetooth turned on? Is there anything in /sys/class/bluetooth?
rj13 kernel is incompatible with CM7. However, the kernel that comes with the CM7 ROMs has bnep turned on, and I have been using it to do reverse bluetooth tethering.
Sorry did not realise the kernel for CM7 is different.
I am now running CM7 and still looking for tethering settings in GUI.
EDIT: Still can not find it
a.fiodorov said:
Sorry did not realise the kernel for CM7 is different.
I am now running CM7 and still looking for tethering settings in GUI.
EDIT: Still can not find it
Click to expand...
Click to collapse
There isn't an easy gui setting to do that, the normal way to do bluetooth tethering is to run the pand connect from another device such as a PC, and CyanogenMod has a pand listening for connections and shares its internet, because the normal case is for a laptop to connect to a phone's cell network.
But running pand from the player should work now and give you a bnep0 device that you can configure. Easiest way is to put the steps in a script and run it to connect.
The bluetooth won't come on: says it's in airplane mode. Wifi ignores it though.
So should I fire up pand -c [address] from the player and I am ready to go?
Did not work when bluetooth was still on.
a.fiodorov said:
The bluetooth won't come on: says it's in airplane mode. Wifi ignores it though.
So should I fire up pand -c [address] from the player and I am ready to go?
Did not work when bluetooth was still on.
Click to expand...
Click to collapse
pand will get the bnep0 network device to show up. Then you need to use dhcpcd or ifconfig to configure the network device.
# pand -c 00:12:40:53:AC:A4
# netcfg
lo UP 127.0.0.1 255.0.0.0 0x00000049
ifb0 DOWN 0.0.0.0 0.0.0.0 0x00000082
ifb1 DOWN 0.0.0.0 0.0.0.0 0x00000082
usb0 DOWN 0.0.0.0 0.0.0.0 0x00001002
tunl0 DOWN 0.0.0.0 0.0.0.0 0x00000080
sit0 DOWN 0.0.0.0 0.0.0.0 0x00000080
ip6tnl0 DOWN 0.0.0.0 0.0.0.0 0x00000080
Click to expand...
Click to collapse
Still no bnep0 . The bluetooth is on.
After some googling found a command:
# sdptool search dun
Inquiring ...
Searching for dun on 00:12:40:53:AC:A4 ...
Service Name: Dial-up Networking
Service RecHandle: 0x10009
Service Class ID List:
"Dialup Networking" (0x1103)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 8
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Dialup Networking" (0x1103)
Version: 0x0100
Click to expand...
Click to collapse
What am I missing?
CM
for people who found this thread, here's a potentially very useful link:
http://forum.cyanogenmod.com/topic/...r-blackberry-phone-via-bluetooth/#entry268658
I will see what I can make of it
CM7
I tried the above guide with CM7, and that's the error I got: "Couldn't set tty to PPP discipline: Invalid argument". pptpclient.sourceforge.net says it's just a matter of ppp_async module. I will see if I can get ambrice to include it into the kernel.
any progress or info on this?
I have tried entropy512 as well as rj's kernel and not found the beep module. I also loaded CM7 Rom and got a boot loop. I updated to CM9 and it booted but still no beep module.
Any info would be appreciated.
Thanks.
Try ambrice's ppp_async kernel module with his latest CM7. Use the guide above to get the reverse tethering. That's the only solution I found so far.
Here's the module: http://www.2shared.com/file/PTXe8_Y-/ppp_async.html
Dear All,
I am on Ubuntu 11.04, and it has been quite sometime to figure out how to make an access point out of it. I had BCM4312 card which didn't allow me to install the b43 firmware, and finally figured that b43-lpphy (low power card, has a separate firmware!!) was the firmware that I had to use. Wifi worked! But now when I connect it to my phone(Samsung Galaxy Ace s5830, right now on CM9 rom) I get the following error message, and the internet connection - though is getting connected is very patchy!
Station 00:07:ab:fd:33:2d trying to deauthenticate, but it is not authenticated.
wlan1: STA 00:07:ab:fd:33:2d IEEE 802.11: authenticated
wlan1: STA 00:07:ab:fd:33:2d IEEE 802.11: associated (aid 1)
wlan1: STA 00:07:ab:fd:33:2d RADIUS: starting accounting session 4F88DE29-00000925
wlan1: STA 00:07:ab:fd:33:2d WPA: pairwise key handshake completed (RSN)
wlan1: STA 00:07:ab:fd:33:2d IEEE 802.11: disassociated
Could not set station 00:07:ab:fd:33:2d flags for kernel driver (errno=95).
Click to expand...
Click to collapse
When I connect the same wifi with other laptops/ Samsung Galaxy S, the issue doesn't seem to be there and browsing is flawless.The above happens over and over again... and my phone keeps shouting out this because of proxyDroid connecting and disconnecting, and the browsing part becomes stressful. I would be very grateful if someone could help me with this
Thanks
Sudharshan
Hello,
I'm new to the world of Fascinate and am currently running my Fascinate on Page Plus. Using the stock TouchWiz ROM, I have 3G working with no problems. Once I flash to an AOSP ROM such as AOKP or MIUI, 3G no longer works. Does anyone know of anything I could be doing wrong, or if there are any files that I can modify to make 3G work on AOSP/ICS ROMs using Page Plus Cellular?
Thanks!
ac_lanham said:
Hello,
I'm new to the world of Fascinate and am currently running my Fascinate on Page Plus. Using the stock TouchWiz ROM, I have 3G working with no problems. Once I flash to an AOSP ROM such as AOKP or MIUI, 3G no longer works. Does anyone know of anything I could be doing wrong, or if there are any files that I can modify to make 3G work on AOSP/ICS ROMs using Page Plus Cellular?
Thanks!
Click to expand...
Click to collapse
Prolly just need to copy over the network specific stuff in the build . Prop and the apn -config
Sent from my Glitched AOKP Unicorn.
Stephen.k.spear said:
Prolly just need to copy over the network specific stuff in the build . Prop and the apn -config
Sent from my Glitched AOKP Unicorn.
Click to expand...
Click to collapse
Thanks sir. I'm going to give that a shot.
Ok, I'm making some slight progress on this issue.
I ran an ADB logcat on the device (excuse me if I got the terminology wrong, very new to Android) and got the following message
E/ConnectivityService( 261): Exception trying to add a route: java.lang.IllegalStateException: Unable to communicate with native dameon to add routes - com.android.server.NativeDaemonConnectorException: Cmd {interface route add ppp0 default 0.0.0.0 0 66.174.168.64} failed with code 400 : {Failed to add route to default table (No such device)}
D/NetworkPolicy( 261): applying policy NetworkPolicy[NetworkTemplate: matchRule
=MOBILE_ALL, subscriberId=valid]: cycleDay=3, warningBytes=2147483648, limitBytes=-1, lastSnooze=-1 to ifaces [ppp0]
D/pppd ( 4014): using channel 163
I/pppd ( 4014): Using interface ppp0
I/pppd ( 4014): Connect: ppp0 <--> /dev/ttyCDMA0
W/pppd ( 4014): Warning - secret file /etc/ppp/pap-secrets has world and/or group access
I had to dink around with the chap-secrets and pap-secrets some and it finally authenticated. Hopefully when I get past this it will be smooth sailing.
Damn this thing is kicking my butt. If anyone has any suggestions, please help
I'm getting the following message now in adb logcat
E/pppd ( 4275): Could not determine local IP address
I/pppd ( 4275): Connect time 0.2 minutes.
I/pppd ( 4275): Sent 97 bytes, received 58 bytes.
I/pppd ( 4275): LCP terminated by peer
W/Netd ( 202): No subsystem found in netlink event
D/NetlinkEvent( 202): Unexpected netlink message. type=0x11
Almost acts as if it may be DHCP
ac_lanham said:
Hello,
I'm new to the world of Fascinate and am currently running my Fascinate on Page Plus. Using the stock TouchWiz ROM, I have 3G working with no problems. Once I flash to an AOSP ROM such as AOKP or MIUI, 3G no longer works. Does anyone know of anything I could be doing wrong, or if there are any files that I can modify to make 3G work on AOSP/ICS ROMs using Page Plus Cellular?
Thanks!
Click to expand...
Click to collapse
I can't speak for MIUI (never tried it), but AOSP, AOKP, THS and CM9 ICS ROMs work fine for my on PagePlus. I've never had any 3G issues. I've never had to make any changes to get 3G to work.
Dear all,
I wish share my experience, with Supernexus 2.0 Build 4.0 on my gs3, more especially with the wifi tethering.
Like most of people, i encountered the issue with the last version where wifi tether did not work, although in the release note, it is indicated as fixed.
So, like others guys, second device was properly connected to the wifi hotspot (it had an IP adress).
Ping to gateway OK... For me, all should be ok to provide internet to second device, but never.... :crying:
I decided, after many tests, wipes, re-install, to check logfile with logcat tools, and i found this :
05-06 08:29:14.255 D/Tethering(2264): notifying tethered with iface =null
...
...
05-06 08:29:20.775 D/libgps (2264): agps_ril_update_network_state: Waiting for IPC connection - timeout
05-06 08:29:20.775 E/libgps (2264): GpsiClient: Can't write to closed pipe
05-06 08:29:20.775 E/libgps (2264): IPC Communication Error, /tmp/11980989/proprietary/deliverables/android/gps_interface/../gps_interface/gpsi_client/GpsiClient.cpp:1143 agps_ril_update_network_state
05-06 08:29:20.775 D/libgps (2264): proxy_agps_ril_update_network_state: called
05-06 08:29:20.775 D/libgps (2264): agps_ril_update_network_availability: Waiting for IPC connection...
05-06 08:29:21.780 D/libgps (2264): agps_ril_update_network_availability: Waiting for IPC connection - timeout​
Where id 2264 is regarding the tether process in activity for my test.
So, when i read logfile, I found this very weird :
05-06 08:29:20.775 E/libgps (2264): IPC Communication Error, /tmp/11980989/proprietary/deliverables/android/gps_interface/../gps_interface/gpsi_client/GpsiClient.cpp:1143 agps_ril_update_network_state
So, by curiosity, i enabled GPS by the toggle, and a miracle appear, the wifi tethering has worked perfectly.....
My second device connected to the hospot, can browse and get data from internet.... :victory:
May be, someone (an expert) can explain this, but for the moment I wish share this workaround with all.
See you,
Manuxme.
May be relevant to us, don't know. But should be noted the ROM you mention is for the international, just in case someone gets eager and tries using it.
We have hotspot unlocked for the most recent builds of TW.
He is posting in the wrong g forum
Transmitted with a portable device using Xparent Blue Tapatalk 2
edfunkycold said:
He is posting in the wrong g forum
Transmitted with a portable device using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
You are right.... Sorry for that, it was my first ppost altough I follow many subject since few weeks....
DO not hesitate to move the post to the good one
Manuxme.
Is the post can be move to this area :
Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting (and not Sprint Samsung Galaxy S III > Sprint Galaxy S III Q&A, Help & Troubleshooting ).
Sorry for the inconveniences.
Manuxme.
Manuxme said:
Is the post can be move to this area :
Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting (and not Sprint Samsung Galaxy S III > Sprint Galaxy S III Q&A, Help & Troubleshooting ).
Sorry for the inconveniences.
Manuxme.
Click to expand...
Click to collapse
You can report the thread (from the browser) and just say you want the thread moved, or PM a mod
CNexus said:
You can report the thread (from the browser) and just say you want the thread moved, or PM a mod
Click to expand...
Click to collapse
Done
Transmitted with a portable device using Xparent Blue Tapatalk 2
All,
About the workaround indicated yesterday by enabling the GPS, actually, it does not work !!!!
I do not why yesterday it works. When GPS turn UP wifi tether works when turn down, it does not works. A strange luck ??!!
BTW, I continu investigations, tests and founds the really root cause (already found by people on other forum) :
Code:
AccountRecoveryService$Receiver }
05-07 13:06:28.145 D/dalvikvm(2725): GC_CONCURRENT freed 360K, 5% free 9328K/9784K, paused 1ms+1ms, total 14ms
05-07 13:06:28.320 D/ConnectivityService(2268): handleInetConditionHoldEnd: net=0, condition=100, published condition=100
05-07 13:06:30.230 D/ConnectivityService(2268): ConnectivityChange for mobile_dun: CONNECTED/CONNECTED
05-07 13:06:30.270 E/SecondaryTablController(1907): [B]ip route add failed: /system/bin/ip route add 0.0.0.0/0 via 10.221.59.1 dev rmnet1 table 60[/B]
05-07 13:06:30.270 W/FrameworkListener(1907): Handler 'interface' error (No such device)
05-07 13:06:30.275 E/ConnectivityService(2268): Exception trying to add a route: java.lang.IllegalStateException: command '182 interface route add rmnet1 secondary 0.0.0.0 0 10.221.59.1' failed with '400 182 ip route modification failed (No such device)'
05-07 13:06:30.275 E/ConnectivityService(2268): Exception trying to remove a route: java.lang.IllegalStateException: command '183 interface route remove rmnet1 default 0.0.0.0 0 10.221.59.1' failed with '400 183 Failed to remove route from default table (No such process)'
05-07 13:06:30.295 W/NetworkPolicy(2268): shared quota unsupported; generating rule for each iface
05-07 13:06:33.300 D/Tethering(2268): TetherModeAliveState.processMessage what=3
05-07 13:06:33.300 D/Tethering(2268): chooseUpstreamType(true), preferredApn =4, got type=4
05-07 13:06:33.335 D/TetherController(1907): setDnsForwarders(0 = '192.168.10.110')
05-07 13:06:33.335 D/TetherController(1907): Sending update msg to dnsmasq [update_dns:192.168.10.110]
Everytime, Wifi tethering is enable; this issue apear :
05-07 13:06:30.270 E/SecondaryTablController(1907): ip route add failed: /system/bin/ip route add 0.0.0.0/0 via 10.221.59.1 dev rmnet1 table 60
So, with a terminal emulator in root acces on the phone (example below in the screenshot), i launch exactly the same command line, and it works ?! :
Screenshot explanation:
1 - Check the new entry, added by the start of wifi tether process.
In orange, the exact command line launch on the terminal, in the history command line number 10.
Now, i sure, with this manual intervention, it works , the wifi tether allow other device to reach internet.
But why it failed everytime by the the normal way ? Is someone know ?
FOr the moment, i am going to try to write a shell script to add/remove the entry when necessary.
Thanks,
Manuxme.