Bricked SGSII after nandroid restore - Galaxy S II Q&A, Help & Troubleshooting

Hey guys,
using MIUI.us version 2.7.13 on my phone, but since my android.phone FCed all the time here on holidays I thought of going back one version. Just wanted to restore to 2.7.6.
Unfortunately I am now stuck at the yellow boot logo.
I just a USB cable to reflash the whole thing, but my phone does not connect to the laptop. I can enter the download mode and it says bright and clear "downloading... do not restart phone", but it simply just not connects with ODIN.
Is this because the cable does not support that or is something bigger the problem?
Thanks for your help!
damnation333

clean
Have you tried cleaning the micro USB port? Or a different cable?

scayre32 said:
Have you tried cleaning the micro USB port? Or a different cable?
Click to expand...
Click to collapse
Hey,
I'm in Crete. Managed to pick up that cable on the way there. My only chance for the time being. Cable is new and clean. Should work.

Anybody else an idea?
Thanks!

damnation333 said:
Hey guys,
using MIUI.us version 2.7.13 on my phone, but since my android.phone FCed all the time here on holidays I thought of going back one version. Just wanted to restore to 2.7.6.
Unfortunately I am now stuck at the yellow boot logo.
I just a USB cable to reflash the whole thing, but my phone does not connect to the laptop. I can enter the download mode and it says bright and clear "downloading... do not restart phone", but it simply just not connects with ODIN.
Is this because the cable does not support that or is something bigger the problem?
Thanks for your help!
damnation333
Click to expand...
Click to collapse
ok seems that your phone may be only soft bricked, not hard bricked, so you can easily make it work again, try to enter recovery by key combo, if you can enter recovery just wipe every thing, and then make afresh install of the rom, if you can only enter download mode, just try any other usb cabl and use another usb port in your usb, and flash stock samsung rom, and you will be fine,
btw : i don't know about miui version , is it ics or gb, and whats kernel you are using, please provide more info about rom version and the used kernel.

damnation333 said:
Hey guys,
using MIUI.us version 2.7.13 on my phone, but since my android.phone FCed all the time here on holidays I thought of going back one version. Just wanted to restore to 2.7.6.
Unfortunately I am now stuck at the yellow boot logo.
I just a USB cable to reflash the whole thing, but my phone does not connect to the laptop. I can enter the download mode and it says bright and clear "downloading... do not restart phone", but it simply just not connects with ODIN.
Is this because the cable does not support that or is something bigger the problem?
Thanks for your help!
damnation333
Click to expand...
Click to collapse
First tell me r u able to boot in cwm recovery or not.
Sent from my GT-I9100 using Tapatalk 2

Samsung specific usb drivers must be installed on PC for the download mode to work. That's your problem. Just install Kies or only the usb drivers for Samsung
Sent from my GT-I9100 using Tapatalk 2

Phil3759 said:
Samsung specific usb drivers must be installed on PC for the download mode to work. That's your problem. Just install Kies or only the usb drivers for Samsung
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I think from the OP's words it seems that he already has gs2 drivers in his PC.
Sent from my GT-I9100 using Tapatalk 2

stuck download mode
hi just a thought have you got kies installed? and also do not have it running at the same time as odin its only needed for driver support as you may or may not know.
also as previous posts suggest you haven't totally bricked your phone so should be sound to restore.

I think u had unchecked ur debugging mode....

Stuff to try when Odin doesn't work:-
*Must run Odin as administrator in Windows.
*Ensure Kies & it's processes aren't running in Windows task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, re-download & reinstall it, reboot, try the flash again. Also run Windows Update.
Sent from my GT-I9100 using Tapatalk 2

It seems Mr. OP forget to check this thread after started. So folks no need to give solutions.
Sent from my GT-I9100 using Tapatalk 2

...

Hey guys,
I had had the drivers installed. Just installed KIES aswell, but it didn't make a difference.
I can't go into CWM anymore. The only thing I can manage is the download mode, but I can't get ODIN to connect with the phone.
The cable I am using is not the original one, but a multicable (plugs for all kinds of USBs, iPhone, phones). Is it possible this is the reason?
Thanks!

Stuff to try when Odin doesn't work:-
*Must run Odin as administrator in Windows.
*Ensure Kies & it's processes aren't running in Windows task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, re-download & reinstall it, reboot, try the flash again. Also run Windows Update
Click to expand...
Click to collapse
- Odin is automatically started as admin on my PC
- KIES hadn't been installed before (but the drivers). Also installed KIES now and it is not running in the background
- tried all 3 USB ports
- only have this one cable here in Crete... can't try another yet
- will try now
- will try now
Thanks guys!

MistahBungle said:
You plagiarist ! (j/k).
Click to expand...
Click to collapse
Lol, I'm lazy, and you always give sound advice. Why fix what ain't broken, eh?
Sent from my GT-I9100 using Tapatalk 2

Hey everybody,
just got it sorted.
Bought a new cable and now ODIN can connect without trouble. What did we learn from this: never use one of those multicables for flashing etc. They won't work.
Btw my friend tried to use the same cable for his iPhone and it wasn't able to connect either to iTunes. Just charging worked!
Thank you so much for your help!

Related

Odin doesn't see my phone in download mode?!?!

As the title says.... I am currently running ZenDroid 2.0.1. Before flashing this as always I start off fresh by Odining back to stock then proceed with whatever rom is to my pleasing that week... I have tried using different cables. I have also tried a PC and a MAC running Parallels(VM). I also tried Hiemdall on both. All still no luck. I have googled and all I find is the suggested above. I also tried getting into download mode in all ways I know possible to see if Odin might possibly recognize it. (Holding volume buttons while plugging into PC, Up+Power button, AIO reboot into DL mode, selecting Download from power menu and even using a JIG.
If anyone else has any other suggestions or if I missed something, please LMK??
Thanks in advance for taking the time to help
Sent from my SGH-T959 using XDA App
I think what you need is:
Latest odin v1.85
Latest Samsung drivers
And another usb cable to try.
the method you use to get in download mode should not make a difference - if you're in download mode - you're in download mode.
Does your computer recognize your phone when the phone is booted up? Can you connect and transfer files, etc.? If so - your USB cable and connectors are good, and your problem is likely related to not having the drivers installed.
if you're trying this on a new computer - one you haven't ODIN'd your phone from before, make sure you have the samsung drivers installed.
If you can't even transfer files, etc. - try a new USB cable - and NOT one that came with a charger (some of those are not actually USB cables - they can only charge your phone). You can get usb-to-microusb cables for like a buck online - places like monoprice or many others.
If you REALLY did try new USB cables, make sure the USB ports are clean - both on the phone and on the computer you're trying to hook to.
Thanks for your responses.
I found the solution to my problem. I decided to start from scratch. I deleted the drivers, AIO and Heimdall. Then I plugged in the phone just to see if Windows 7 sees it as an unknown device still. It was recognized but it was asking for drivers this time. So I proceeded to install JUST the driver and magically everything was working NORMAL again!!
Im not sure what may have caused this to happen. I flash my phone every other week so I found it kind of odd when this did occur.
Oh well.. ITS FIXED!! AND I CAN FLASH AGAIN!!
Sent from my SGH-T959 using XDA App
odin doesnt detect my phone
I dont know what to do! Odin doesn't detect my phone. i have tried different usb cable , different computer. no matter what i did odin doesnt recognize my phone in download mode. what should i do? Please somebody help. What driver should i install?

Please Help Me

I've tried everything on this site to root and get cwm to install custom roms. I've done this with my inspire and infuse but the sgs2 is currently winning the battle.
I have the drivers installed and I know how to boot into download mode but for some reason odin will not work for me. I can't get the yellow bar to come up for me to install the pda file. I like the phone but not being able to flash roms is gonna suck.
If anyone could help that would be great. I've tried all the methods on here and no success. Thanks in advance.
Put your phone into download mode and connect to you computer, then go to to device management either through settings or by right clicking on my computer then properties.
There look through the USB devices on your computer, you should find this listed somewhere there
Code:
Samsung Mobile USB CDC Composit Device
If the driver is set up correctly.
If you can't find the above then uninstall any thing that is any kind of a Samsung mobile device, unplug your phone and uninstall and reinstall Samsung kies.
If you do find the above, unplug your phone, make sure the version of Odin you have is 1.82 or higher.
Then do the following in the exact order
1. Reboot your computer
2. Start Odin
3. Put your phone into download mode and connect to your computer - and hopefully within 10 to 15 seconds Odin should recognize your phone
Sent from my SAMSUNG-SGH-I777 using XDA App
ODIN Flash
cpbeats said:
I've tried everything on this site to root and get cwm to install custom roms. I've done this with my inspire and infuse but the sgs2 is currently winning the battle.
I have the drivers installed and I know how to boot into download mode but for some reason odin will not work for me. I can't get the yellow bar to come up for me to install the pda file. I like the phone but not being able to flash roms is gonna suck.
If anyone could help that would be great. I've tried all the methods on here and no success. Thanks in advance.
Click to expand...
Click to collapse
This should fix the problem:
Get the Samsung Unified USB driver here: http://api.viglink.com/api/click?for...13196871580881
Be sure to uninstall kies if it's installed and uninstall any other samsung usb driver.
Then reboot windows before installing the new unified samsung drivers.
After installation of the new usb drivers reboot windows before connecting the usb cable into the phone.
Plugging in the original samsung usb cable into a different usb port in the
back of the computer is also a good thing to try as Dungeon47 was saying.
Good Luck!
Make sure you are using a USB directly connected to your motherboard. Make sure you are using an official Samsung or Blackberry micro USB cable. If that doesn't help, try another port.
Ok thanks i'm still in the process of trying and doing what y'all suggested. I will let y'all know if it works.
Well I got superuser now but still unsuccessful in flashing rom.
Says installation aborted. Ill try later but thanks for helping out.
Did you try starting Odin first, and plugging your phone in afterwards? That hung me up for a little bit. (I'm assuming you reinstalled Kies as suggested).
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Yeah I got root but when I try to flash a rom I'm unsuccessful. Trial and error. Ill get it.

Odin won't recognize my sgs2.

Hi,
First of all, I've been searching for this problem. And up to now, I haven't found a solution yet.
Odin won't recognize my phone in download mode. I am on Hydrog3nics ROM right now, but I want to go back to stock (I need to send my phone for repair, because of dust under my camera lens).
Things I've tried:
- Reinstalled my drivers with KIES
- Tried all the USB ports I got on my PC
- Opened ODIN with Administrator rights
- Restarted my PC, my phone, cleared all cache and **** on my phone.
- USB debugging off (and on)
- used different versions of ODIN
It doesn't recognize the phone when it's booted too, but it does recharge my phone .
It only recognizes my phone when it's turned off and I plug in the cable (the usb sound on my PC).
Kinda desperate of this problem right now, lol.
thanks
Do you have access to CWM to try to flash a different Kernel i.e. Siyah?
Go to boot loader in sg2 then go to odin in pc & connect the usb to phone
Sent from my GT-I9100 using Tapatalk 2
fxa5209 said:
Do you have access to CWM to try to flash a different Kernel i.e. Siyah?
Click to expand...
Click to collapse
Yes, but I don't see why that would help?
Go to boot loader in sg2 then go to odin in pc & connect the usb to phone
Click to expand...
Click to collapse
Umm, that's the whole point here. Until there I get stuck...
sebas156 said:
Hi,
First of all, I've been searching for this problem. And up to now, I haven't found a solution yet.
Odin won't recognize my phone in download mode. I am on Hydrog3nics ROM right now, but I want to go back to stock (I need to send my phone for repair, because of dust under my camera lens).
Things I've tried:
- Reinstalled my drivers with KIES
- Tried all the USB ports I got on my PC
- Opened ODIN with Administrator rights
- Restarted my PC, my phone, cleared all cache and **** on my phone.
- USB debugging off (and on)
- used different versions of ODIN
It doesn't recognize the phone when it's booted too, but it does recharge my phone .
It only recognizes my phone when it's turned off and I plug in the cable (the usb sound on my PC).
Kinda desperate of this problem right now, lol.
thanks
Click to expand...
Click to collapse
Another option is a different cable. I have one cable that does recognize and one that doesn't.
Sent from my GT-I9100 using XDA
mattyh77 said:
Another option is a different cable. I have one cable that does recognize and one that doesn't.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I only got one cable: the out-of-the-box cable..
It should work fine i hope
do you try with the "windows xp compatibility" option?
sebas156 said:
Hi,
First of all, I've been searching for this problem. And up to now, I haven't found a solution yet.
Odin won't recognize my phone in download mode. I am on Hydrog3nics ROM right now, but I want to go back to stock (I need to send my phone for repair, because of dust under my camera lens).
Things I've tried:
- Reinstalled my drivers with KIES
- Tried all the USB ports I got on my PC
- Opened ODIN with Administrator rights
- Restarted my PC, my phone, cleared all cache and **** on my phone.
- USB debugging off (and on)
- used different versions of ODIN
It doesn't recognize the phone when it's booted too, but it does recharge my phone .
It only recognizes my phone when it's turned off and I plug in the cable (the usb sound on my PC).
Kinda desperate of this problem right now, lol.
thanks
Click to expand...
Click to collapse
Have you tried clearing "Dalvik Chache" ? for me it worked. To clear Dalvik cache , Reboot into recovery mode Go to Adavanced -> from there select "Clear Dalvik Cache".
I am on CyanogenMod 10 by the way.
All the best
Did you try Mobile Odin? You just put the rom/kernel on the SD card. Select and flash away!! I use it all the time.

[Q] Stuck at cache/modem/DO NOT TURN OFF TARGET on Odin for Stock2.1

I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
parasharenator said:
I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
Click to expand...
Click to collapse
Dont worry....this time go to download mode and flash eugenes that does not brick aka Eugene_2E_JK2_Froyo with the same pit file and ur good to go brother
Similar Problem but different results.
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
david.carlton.jr38 said:
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
Click to expand...
Click to collapse
Can you explain the steps your taking when you try to get into odin
Sent from my SGH-T959 using xda app-developers app
The steps I take is put the phone into download mode by pulling the battery and then holding both the volume up and down then reinsert the battery. It shows the download screen. I then start odin and I have tried version 1.7 and the latest version of 3.0.7. Then I plug my phone into the USB port and windows pops up saying unrecognized device. I have reinstalled drivers several times. Now to describe my desktop is that it is a pentium III 550 Mhz...and old computer and running Windows XP Professional. I am able to do the mass storage when the phone is on normally so it recognizes it that way though. I have tried different USB ports on it as well so just unsure. I have rooted the phone and have superuser app access. ROM manager was supposed to have flashed the recovery mode but it never goes into the CWR mode either and its version is 2.5.1.2 which I have seen work on these phones in videos on YouTube so guess I am trying a different route so I can play with the mods to find a ROM I like. I was going to try the Avatar ROM for the vibrant but just cannot seem to get to the point where I can get the ROM flashed. Any help would be greatly appreciated.
Keep the battery in and lull up Odin. Cut off the phone and hold both volumes while inserting USB hopefully the computer will then recognize it
Sent from my GT-I9000 using xda app-developers app
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
Stay away from kies I will Brick your device as for the computer being old I don't know. I've never had this problem before. Sorry o couldn't help
Sent from my GT-I9000 using xda app-developers app
david.carlton.jr38 said:
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
ioancr said:
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
Click to expand...
Click to collapse
Do you have the link to the Heimdall one-click package or do I just google it?
david.carlton.jr38 said:
Do you have the link to the Heimdall one-click package or do I just google it?
Click to expand...
Click to collapse
I found the link:
http://d-h.st/M93
on the Repository thread: http://forum.xda-developers.com/showthread.php?t=1875966
And since only thing remaining in your case is USB cable, I would say try with a different micro USB cable, even a different vendor's will do, as it did the trick for me( see the edit in OP)
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
david.carlton.jr38 said:
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
For now, you can try any micro usb cable that fits, they all have same specifications.
Okay. Thanks!
Sent from my SGH-T959 using xda app-developers app
Stuck on cache
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Mentalmama said:
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Click to expand...
Click to collapse
Great that you could get it to the download mode.
Follow these steps:
1. Make sure that you have the correct drivers installed for your Operating System. Preferably, download the latest drivers. You can verify when your device is recognized when connected in download mode.
2. Make sure you follow this thread for Odin flashing http://forum.xda-developers.com/showthread.php?t=849028
3. If unable to flash using ODIN successfully, try with different USB ports, on same computer or a different one, say, a laptop.
4. If still unable to do so, try with different USB cables (any micro-usb should do).
In this way, you should by trying multiple alternatives at each step you should be able to eliminate the options and figure out what is really creating the problem in your flashing. Trust me my friend, this has not go anything to do with technology. just follow the steps, try alternatives and you would resolve this. Do post back on thread, if you have any queries.

[Q] I9100G not recognized by Odin after flashing Custom ROM

Hi there,
I tried to flash CM 10.1 on my friend's Samsung Galaxy SII I9100G. I followed the Tutorial from the CM's wiki, but it didn't worked because I got errors from Heimdall. After a few minutes with google I tried Odin and it worked without any Problems. After flashing cm-10.1-20130304-EXPERIMENTAL-i9100g-M2.zip and related gapps the phone was stuck in a bootloop. After 10 minutes I pulled out the battery and plugged it back in. Since then, the phone always booted into recovery automatically. And I'm able to boot into download mode aswell.
But the phone isn't recognized by Odin or any other tool. I've reinstalled the samsung phone drivers serveral times. I tried it with Kies, without Kies, with driver packages from XDA.. Nothing worked. If I remove the battery and hold Vol Down+Home+Power while plugging in the USB cable my PC recognizes some devices but cannot install the driver because after 2 seconds the devices is unplugged again.
I think the battery is too low to establish a USB connection. I will charge the battery tomorrow at work and give it another try.
Any advice for the whole problem? Is it all related to the low battery?
Kind regards
fzninuse
Clean uninstall Kies (your uninstaller pro or similar), then reinstall.
Got a laptop laying around? Try that instead.
gastonw said:
Clean uninstall Kies (your uninstaller pro or similar), then reinstall.
Got a laptop laying around? Try that instead.
Click to expand...
Click to collapse
A clean reinstall of Kies didn't helped.. Even it isn't recognized on another PC. Because I can access recovery mode (CWM) and download mode I guess it's no brick.. just an driver issue?! I tried several USB Ports and USB cables.. nothing helped..
Can it be caused by a wrong kernel? Is it possible to flash a kernel with CWM?
Of course, flash the zip version of the kernel.
Make sure it's neant for I9100G
Sent from the little guy
gastonw said:
Of course, flash the zip version of the kernel.
Make sure it's neant for I9100G
Sent from the little guy
Click to expand...
Click to collapse
Even after flashing another kernel the phone boots directly into recovery..
After trying several ROMs and Kernels I guess it's a bootloader failure.. Because there is no possibillity to flash a new bootloader via CWM and I get no USB connection, I am screwed... =/
No you are not, keep trying.
Other(s) PC might do the trick.
Also get a couple of Odin versions.
Get new cables, genuine s2s that is.
And keep reinstalling kies.
I tried it with another USB cable and connected the phone without the battery. Now I get a "OMAP4430" Device in the device manager which disappears after 2 seconds and reappers 5 seconds later and after 2 seconds it's gone again.. Why the processor is recognized by my PC and not the smartphone itself?!
I will try this: http://forum.xda-developers.com/showthread.php?t=1701471&page=3
Setting up a XP VM right now..
try removing kies completely and install only the drivers
also get a new usb and try connecting to a different port
also do u have ur phone in warranty ?

Categories

Resources