hi
I am wondering if is there a samsung galaxy tab power plug is on angle? [30pin "L" shaped connector?]
I will explain why I need angle plug.
I am disabled guy and I am in chair. my galaxy tab is on chair. http://imageshack.us/photo/my-images/12/img1436zi.jpg/
you see that the power plug is stick out. I am crash at doorway lol
if is there 30pin "L" shaped connector? , it would help
I have the p6800 and I will put the p6800 on my chair but I need a 30pin "L" shaped connector
Unless you have one custom made, it is probably going to be hard to come by.
Have you considered flipping the unit 180 degrees? You would have the cord headed toward your lap, but maybe that would be better?
you might also consider modifying the custom dock attachment to allow you to flip the device vertically as you move around. Kind of flip it out of the way and then pop it right back?
Doug M.
There is nothing for sale, but my advice would be to get someone with good soldering skills to modify that plug
Your device look's like a P1000, is it an old picture?
You will have to get your self a desktop dock and take it apart and unscrew the metal weight from it and remove that..
Then cut up the cover so the flexable 30 pin cable sticks out and can bend around.
Next step is to velcro it to the back of your tab and the female 30 pin connector is at back now so less chance
of knocking things off etc.
have done this to mine best thing i did to mod the dock.
will try to dig out a photo of it some time and add it to here so you can get an idea of what to do...
MRBR7 said:
You will have to get your self a desktop dock and take it apart and unscrew the metal weight from it and remove that..
Then cut up the cover so the flexable 30 pin cable sticks out and can bend around.
Next step is to velcro it to the back of your tab and the female 30 pin connector is at back now so less chance
of knocking things off etc.
have done this to mine best thing i did to mod the dock.
will try to dig out a photo of it some time and add it to here so you can get an idea of what to do...
Click to expand...
Click to collapse
Excellent idea. If you can post the photo, I'll chop up one of my docks and send the result to carlo67 if he wants it.
Based on my finding with the screen burn-in issue, I will not be using either of my 2 docks.
Carlo 67 - You still out there?
Doug M.
I am ok it is sort out
it is stick out little bit [1 inch] of chair but it is ok, I have to be careful
z
thank you for all of replies
dwmackay said:
Excellent idea. If you can post the photo, I'll chop up one of my docks and send the result to carlo67 if he wants it.
Based on my finding with the screen burn-in issue, I will not be using either of my 2 docks.
Carlo 67 - You still out there?
Doug M.
Click to expand...
Click to collapse
Related
Does anyone know how to take a G-Tab apart and repair a broken power connector? My son pulled it off of the table where it was charging and it landed squarely on the adapter where it was plugged into the GTab. Everything else works, but charging, of course, does not.
stalnakerz said:
Does anyone know how to take a G-Tab apart and repair a broken power connector? My son pulled it off of the table where it was charging and it landed squarely on the adapter where it was plugged into the GTab. Everything else works, but charging, of course, does not.
Click to expand...
Click to collapse
Buy a dock, that's what I did
stalnakerz said:
Does anyone know how to take a G-Tab apart and repair a broken power connector? My son pulled it off of the table where it was charging and it landed squarely on the adapter where it was plugged into the GTab. Everything else works, but charging, of course, does not.
Click to expand...
Click to collapse
Choice 1: Buy a dock.
Choice 2: Open it up and solder it back in.
Choice 3: Sell your son to a slave labor camp and use the money to buy a new tablet.
Stolen from another forum about performing a hardware reset:
Disassemble the tablet. Remove the four rubber stoppers on the bottom of the tablet (put them aside). Next, unscrew the screws under them (keep those too). Next we need to get the back half of the tablet off. Put the tablet face down on a piece of paper or another protective material. Gently work one corner of the tablet until the two halves are slightly separated, then use something thin like a business card to keep them slightly parted. You can then use something thin and strong, like a plastic gift card to zip around the edges and break the seal. Prying will only damage your plastics.
snowzach said:
Stolen from another forum about performing a hardware reset:
Disassemble the tablet. Remove the four rubber stoppers on the bottom of the tablet (put them aside). Next, unscrew the screws under them (keep those too). Next we need to get the back half of the tablet off. Put the tablet face down on a piece of paper or another protective material. Gently work one corner of the tablet until the two halves are slightly separated, then use something thin like a business card to keep them slightly parted. You can then use something thin and strong, like a plastic gift card to zip around the edges and break the seal. Prying will only damage your plastics.
Click to expand...
Click to collapse
pulling it apart is one thing, resoldering the connection is another. I've read that it's really tricky (and small) Mine started acting up, had to have the plug on a weird angle for the tablet ot start charging. I thought it was the chord, but it must be the hardware inside the tablet that caused it. I bought a dock, and a second charger...the dock works BEAUTIFULLY for charging, and for watching movies on the big screen via the HDMI port on the dock...
Viewsonic G connector input jack power jack
If you need to replace the jack, you can get it at Ebay.....just type in Viewsonic G jack or power jack and they have them there.
Well, since it's taking so long for both Asus and 3rd parties to come with accessories for the transformer, I decided to take advantage of some foamcore scraps I had, and made me a "dock" for videochat, video watching and gaming. I say it's a "dock" because it is simply a bunch of foamcore boards, paper and glue (I'll probably seal it, sandpaper it, and paint it)
Right now, it's very handy, for using the tablet without having to hold it. It's angled, at a very confty angle, and doesn't get in the way (the keyboard dock, while awesome, gets in the way)
I had the images in my Dropbox gallery, but had to attach them because I'm a new user though a long time lurker. The good thing about putting them in the dropbox would be that I could add and update the pics at any time, without having to come back to the post, and edit it. Oh, and the picstures would be clearer, since I'm taking them with a 12 MPixel cam. Well, at least it keeps linkspam out of XDA
I must admit I am thinking of making my own dock via the use of a decorative plate stand (you know the ones, fold open to 90 degrees, have a lip at the bottom)
Like this one
Pretty cool idea there, but I have a question.. You can find your apps on that home screen?? It's crazy!
ericcarboni said:
Pretty cool idea there, but I have a question.. You can find your apps on that home screen?? It's crazy!
Click to expand...
Click to collapse
Yes I can, but I agree that it's not for everybody. What I do, is having the apps grouped spacially. 90% of the apps I use are on that screen. I really don't like going to the app drawer
you can always use a "folder type" system like smart shortcuts so u can categorize apps into "folders".
The plate idea is cool but ya might want to check out the arkon stand. same concept but its collapsible.
http://www.amazon.com/IPAD-ST-Unive...2?s=electronics&ie=UTF8&qid=1312309239&sr=1-2
I use one of these at work (we have plenty in the supply closet):
I just put it on there upside down and let the screen rotate 180 degrees so I can plug in the charger up top. I can also put books of various sizes on the back end, to adjust screen angles.
@carrrnuttt - lol, thats brilliant
(..although i'd add some nice felt between the 'stand' and TF)
In case anyone was wandering (as i was) - this is a Black Mesh Business Card Holder - so you can pretend that is what you'll use it for
stujuk said:
I must admit I am thinking of making my own dock via the use of a decorative plate stand (you know the ones, fold open to 90 degrees, have a lip at the bottom)
Like this one
Click to expand...
Click to collapse
I have this, the only issue i have with it is it does not lean back enough.
Why not just buy a cheap leather folio case for the transformer for $10 from ebay, they all have the ability to stand the TF up at an angle for video viewing/video chat etc
such as this one
brett_day said:
Why not just buy a cheap leather folio case for the transformer for $10 from ebay, they all have the ability to stand the TF up at an angle for video viewing/video chat etc
such as this one
Click to expand...
Click to collapse
I've got one of those and I have to say it's not very good when you've got the Transformer oriented the normal way (camera at the top) because the flap that covers the bottom (Dock connector) doesn't hold well so the tablet slides down quite a bit. Great as a standard case for holding, and having with the camera at the bottom, but not so great with you have it stood with the camera at the top.
ant_thomas said:
I've got one of those and I have to say it's not very good when you've got the Transformer oriented the normal way (camera at the top) because the flap that covers the bottom (Dock connector) doesn't hold well so the tablet slides down quite a bit. Great as a standard case for holding, and having with the camera at the bottom, but not so great with you have it stood with the camera at the top.
Click to expand...
Click to collapse
I have this case and it works perfectly. Super snug fit, no slippage, anyway, just thought i would throw that out there. I am happy with mine.
Found a way to charge mine while it is the right way around in my home made dock too.
The case hooks onto the edge of the dock leaving enough gap to plug in the charger
The plastic dock is from my GFs laptop, supposed to be a stand for that, and the thing I bent into a pyramid is a leather place mat
---------------
brett_day said:
I have this case and it works perfectly. Super snug fit, no slippage, anyway, just thought i would throw that out there. I am happy with mine.
Click to expand...
Click to collapse
Maybe mine was an early model and wasn't designed too well.
** UPDATED WITH PICS **
I just got a LapDock from an AT&T store thinking I can mess with it to make it work with my Photon. After disassembling the docking connector, I found that there are 2 separate connectors for the ports, which is awesome. This allowed me to manipulate them into position to fit my MoPho. Plugged it up, and it fired right up like the HD dock for the TV. I'm writing this post from it now, it's pretty cool! I plan on putting up some pics in a bit showing the connections. I'll delve into the device more fully later, but this accessory will work with the Photon fully! No limitations (at least, not in my limited testing)
Good stuff! Looking forward to seeing some photos (taken from your Photon of course, right?) of the dock to see what modifications you made!
Awesome!
I just ordered my Photon today and was hoping that by the time it arrived, someone would have pulled a MacGyver and figured out how to rig the Atrix dock.
You sir, are this month's official winner MacGyver award.
Looking forward to seeing the pics too.
Can't wait to see the pics.
...............................................................
Close up of the Photon HD Dock vs the LapDock. You can see the difference in orientation
The Dock connector needs to be flipped out, then can be opened by removing a screw on each side under a small flat cover.
pop open the connector, its just clicked together at this point. unscrew the metal clip holding the individual connectors to the chassis. the individual connectors can now be manipulated into position for the Photon.
the connectors can be routed under and behind the LapDock so that the Photon lays on the table. I want to figure out a way to rearrange the connectors to hold the Photon like it should, in the dock normally. Webtop fires up and operates as it does on the HD Station.
Nicely done...and glad to give you your FIRST Thanks! I might hafta find me a LapDock on the cheap!
Further disassembly. Flip the LapDock over, remove the screw in the middle near the back of the unit. remove the 2 rubber feet at the back of the unit and remove the 2 screws revealed.flip back over. pry (carefully) the back top cover off the unit, working along the very back of the unit. This should pop the cover off. There is a thin wire running to the charge indicator along the front of the top cover, so work carefully. once off, the circuitry can be examined. the connector that leads to the dock is along the left edge of the board. one PCB connector feeds both dock connectors. This connector is like laptop LCD connectors, and easily pops up and off the board
Bandage said:
Nicely done...and glad to give you your FIRST Thanks! I might hafta find me a LapDock on the cheap!
Click to expand...
Click to collapse
LOL thanks! kinda funny, been lurking here for years, ran into a problem posting this writeup since i was a 'new' member with only 2 previous posts. had to wait 5 minutes between updates.
I saw LapDocks on AT&T's site for only $175 for refurbished units, not too bad considering I paid 300 to get a unit to hack apart....
After removing the dock portion from the rest of the unit, I removed the connectors and took an Xacto knife to the openings for the individual connectors. I removed the shaped openings for the micro hdmi and micro usb, leaving plain rectangular openings. I then fitted the connectors back in, rotating them to match the orientation on the Photon. Luckily, the Atrix has the same spacing between the ports, just a mirror layout and shifted down the edge of the phone. with longer wires, this could be made to be a perfect fit for the Photon, but Moto apparenly knows best
anyway, after getting the connectors set properly, I then pieced it all back together. the new layout strains the wires just a bit, so that everything else is not quite as smooth as it was starting out. It's fine, and works properly, but theres that little bit thats just noticeable. the MoPho hangs off the edge of the dock, and has to be pressed tightly to ensure a good connection, but works great. There is a small piece that pops off of the dock portion, i think its removed if you're using a case with the Atrix, Make sure this piece stays off, I dont think the connection will be very good otherwise.
cdthomas9 said:
After removing the dock portion from the rest of the unit, I removed the connectors and took an Xacto knife to the openings for the individual connectors. I removed the shaped openings for the micro hdmi and micro usb, leaving plain rectangular openings. I then fitted the connectors back in, rotating them to match the orientation on the Photon. Luckily, the Atrix has the same spacing between the ports, just a mirror layout and shifted down the edge of the phone. with longer wires, this could be made to be a perfect fit for the Photon, but Moto apparenly knows best
anyway, after getting the connectors set properly, I then pieced it all back together. the new layout strains the wires just a bit, so that everything else is not quite as smooth as it was starting out. It's fine, and works properly, but theres that little bit thats just noticeable. the MoPho hangs off the edge of the dock, and has to be pressed tightly to ensure a good connection, but works great. There is a small piece that pops off of the dock portion, i think its removed if you're using a case with the Atrix, Make sure this piece stays off, I dont think the connection will be very good otherwise.
Click to expand...
Click to collapse
Hey CD...what about flipping the connectors around in their sockets so the Photon would sit flush, but facing away from the LapDock?
Webtop runs great, i like the environment as a whole, but there isnt much to do natively. Email apps and maneuvering around the phone UI is a little irritating. You can just make the Mobile View full screen, but some of the interface doesnt scale well. I'd like to see native webtop apps, like firefox is, but I'm not sure how that works.
cdthomas9 said:
the connectors can be routed under and behind the LapDock so that the Photon lays on the table. I want to figure out a way to rearrange the connectors to hold the Photon like it should, in the dock normally. Webtop fires up and operates as it does on the HD Station.
Click to expand...
Click to collapse
This thread excited me!!! Have you found a way to make it sit inside yet?
Bandage said:
Hey CD...what about flipping the connectors around in their sockets so the Photon would sit flush, but facing away from the LapDock?
Click to expand...
Click to collapse
I thought of that, but the micro hdmi connector doesn't have enough give or length to do it. I also thought of breaking out the soldering iron, kynar wire and HST but I think that theres a lot of wire in those bundles...
ScandaLeX said:
This thread excited me!!! Have you found a way to make it sit inside yet?
Click to expand...
Click to collapse
Post 13 shows the closest i can get, without lengthening wires i think. or getting Moto to make me a longer connection set
newalker91 said:
I would just dremel a nice little hole through the plastic immediately above the base connector and run the wires up the back of the screen, then build a cradle onto the back of the monitor for the phone. I need to save up and buy one and get to work.
Click to expand...
Click to collapse
LOL, I was thinking of doing the same thing. Just mount the phone to the back of the screen somehow, but the wires are literally no more than 2" long. I think Bandage was looking into micro usb and hdmi extension cables though....
cdthomas9 said:
LOL, I was thinking of doing the same thing. Just mount the phone to the back of the screen somehow, but the wires are literally no more than 2" long. I think Bandage was looking into micro usb and hdmi extension cables though....
Click to expand...
Click to collapse
Yeah...no luck finding an effin Micro HDMI extension cable tho. Anyone else find someone who makes / distributes them?
Wondering if anyone has seen or knows of a right angle 40 pin charging connector? Either that or im hacking up a keyboard if i can find one cheap enough. Im dead set on getting this tab in my dash =D
Sent from my Transformer
What do you mean right angle? Do you mean so the cable is lines to to right rather than at the bottom on the sync/charge cable?
In that case - no, never seen. But its not super-hard to do it yourself. It will still stick stick out around 1cm though, because theres a PCB inside.
Although the PCB can be removed as well, but that requires some very fine soldering (we're talking pins that are like 0.7mm, if not less, with like 0.5mm spacing)
I had a hell of a time to just resolder the data cables on the cable, and the points are located on the PCB so theres only 2 'pins' near there. Soldering those cables on the connector itself would be.. ugh... *nightmares*
Lol no, no micro soldering for me. Just wondering if there has been or is or what miss match parts could possible go together to go from the existing 40 pin port down and back. Like a right angle but coming down and away from you. The ipads have em. But we arent comparing that crap here. I want to make a dock of sorts, to have fiberglassed in. Tab slides down and plugs in to charge. Thats why i mentioned hacking up a keyboard if need be.
Sent from my Transformer
Yeah ok. No I dont think theres any such cable.
But if you just want to angle the cable its quite easy, and if youre careful wont require any soldering.
All you need to do is open the cable up, cut a new hole for the cable in the casing, align it and reassemble it (it will probably have to be glued together again, or plastic welded, simple stuff really).
And even if you would manage to rip off the cables, the + and - cables are (relatively) big. ground is just soldered directly onto the shielding, and + is soldered to 3 pins next to each other, and theres only 1 other pin nearby you have to look out for, but that pin is sortof protected by some plastic thing (which will probably melt from the heat of the soldering iron though lol).
The hardest part of all this is actually opening the damn casing without damaging it too much
Curious if anyone is using the Palm Touchstone wireless charging mod for the SGS3. I got everything for a Palm Pre, touchstone, cable, etc.. Did the mod which was stupid easy... but the buldge of the back cover is driving me nuts. I have no idea how to make it more flush again. There is ZERO chance of putting an case on here now, for 1 it seems like the charging signal wouldn't be strong enough... and the buldge would absolutely prevent it.
Any help would be appreciated.
BTW: I used super thin 24 gauge wire out of a cable (like a usb cable/printer cable) to go from the palm pre charging pads to the pins of the sgs3.
I used the palm pixi's back for my mid. It is thinner that the pre's so there is less bulge.
Edit: I also used copper foil/tape to make my connections. I don't know if that would reduce bulge or not though.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I read somewhere the pixi back was thinner but I read that after I ordered the pre back. I didn't have any copper foil tape so I used wire from a usb cable, and if I did use foil tape it seems like I would need something to push down into the phone connectors as they seem a tiny bit recessed.
Don't get me wrong, everything works, and charging works, but the bulge is noticeable and there is no way I could use a case back now. Glad I got the whole body Zagg invisible shield. :thumbup:
How did you address the phone connectors being deep inside? What did you use to make your foil tape touch the leads in the phone? I just kind of pushed the wires in there and used a little rape to prevent shorts.
T-Mobile Samsung Galaxy S3 SGH-T999 Tapatalk 2
On the Sprint model there is no sim card. If you cut a square out of the internal cover to the right of the microSD card you have a nice little space to hide the circuit board that causes the buldge. I just posted a question- where to buy the internal plastic cover? I don't want to risk screwing up my original.. BTW I used copper tape. On the pixie back I soldered the tape to the leads. For the phone connection I cut the tape too long and rolled it up to the spot it needed to be to make contact with the S3 contacts.
I have the touchstone and palm charging back. Is it possible to do this mod without soldiering the GS3?
Roll the tape up...:fingers-crossed: Sometimes I hate myself, I always think of the hardest way to do something.... Of course - why not roll the tape into a little ball. DUH!
I think I could probably get the bulge down a little, but I'm not sure it would make a lot of difference... I guess I could always just buy a pixi back and try again? or just wait for Sept and get the samsung kit.
I had read that the samsung kit will charge when the phone is relatively close by - I read 2 meters, but that doesnt sound right - that would be like 6ft... I would settle for 1 ft. The touchstone has to be RIGHT on it... If I had an otterbox case, I am 99% sure the magnetics wouldn't catch and I doubt think the charging field would work, because I can hold it just above the reach of the magnets and no charge. Touch it to the touchstone and BINGO.