Hey guys,
i updated my razr to ics via the fastboot files. the update went through and i got a pass. now when i turn on my phone i get into a bootloop. sometimes the phone boots and restart after some minutes.
for the update i used rsd lite 5.7 and this fastboot file:
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.2_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
before the update i dont wipe my phone but now when i got into the bootloop i tried to wipe my phone but i am still in a bootloop.
have somebody an idea what i can do to get rid of this f*** bootloop?
I don't understand if you wiped and still have bootloop ore you couldn't wipe because of the bootloop.
If the latter, press powerbutton and vol down to reset and right after the reset press volume up and down and powerbutton
while the bootloop i make a force shut down and then i can boot in the recovery mode. so i can do a wipe i can also run in an ap fastboot mode but the factory recovery or the cache wipe do not help i got still the bootloop
Wipe again and try to reflash again with rds lite
already tried, i dosent help. i really dont know what the problem is. the updating process works fine no failures but i got into a bootloop
uhm is strange, are you sure that the sfb you are using is the correct one for your phone?
i was sure, now i am not i have a gsm retail razr and i think this is the right sbf, isnt it?
Seroga88i said:
i was sure, now i am not i have a gsm retail razr and i think this is the right sbf, isnt it?
Click to expand...
Click to collapse
What's your region Razr? It's .Eu, .Asia, .Latam?
Anyway, try erasing cache and data prior flash with rsd lite
Code:
fastboot erase cache
Code:
fastboot erase userdata
Cheers
i am in EU
i made data wipe and cache wipe before the flash with rsd lite, but no changes
Seroga88i said:
i am in EU
i made data wipe and cache wipe before the flash with rsd lite, but no changes
Click to expand...
Click to collapse
Do as I said and flash Ics again. Erase works somehow different from wipe.
.eu is your region razr?
Cheers
Sent from my XT910 using xda premium
oh sorry,
can you explain me how i can make a fastbook erase cache/userdata? i only know how to wipe data
yes the region of my razr is .eu
You have the sdk installed on your pc? If yes go into platform-tool with the cmd (if you are win, therminal if you are on linux/mac)
then type the life of pedro during fastboot ap
i did it like you both said. everything went fine the fastboot erase cache/userdata and the flash with the Final EU Android 4.0 ICS rom. but still i have a bootloop -.-
do you know is there an other ics rom which i can try for my razr?
i also tried to update with the leaked update file but i am still in a bootloop ....
Your razr is probably from another region.
Its not right to get a bootloop after flashing a stock rom and wipe data n cache.
Repeat the wipes in recovery. Both data n cache.
Cheers
Sent from my XT910 using xda premium
is it possible to find out which region my phone is?
if i flash with flashMe.bat i get this log:
have you an idea why i get this INFOPreflash validation failure?????
######################################
# EternityProject's FastBoot FlashME #
# #
# If you wanna support us, donate to #
# kholk -- [email protected] #
# #
# or come on our Website! #
# http://forum.eternityproject.eu #
# #
# Happy Flashing! #
######################################
ECHO ist ausgeschaltet (OFF).
Flashing BootLogo....
sending 'logo' (854 KB)... OKAY [ 0.109s]
writing 'logo'... INFOno such partition
FAILED (remote: )
Flashing EBR....
sending 'ebr' (16 KB)... OKAY [ 0.250s]
writing 'ebr'... OKAY [ 0.484s]
Flashing MBR....
sending 'mbr' (16 KB)... OKAY [ 0.203s]
writing 'mbr'... OKAY [ 0.437s]
Flashing DevTree....
sending 'devtree' (512 KB)... OKAY [ 0.172s]
writing 'devtree'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android System....
sending 'system' (262144 KB)... OKAY [ 38.328s]
writing 'system'... OKAY [ 12.137s]
sending 'system' (262144 KB)... OKAY [ 40.622s]
writing 'system'... OKAY [ 10.546s]
sending 'system' (262144 KB)... OKAY [ 40.622s]
writing 'system'... OKAY [ 10.561s]
sending 'system' (6912 KB)... OKAY [ 1.076s]
writing 'system'... OKAY [ 0.343s]
Flashing Kernel....
sending 'boot' (8192 KB)... OKAY [ 1.154s]
writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android Recovery....
sending 'recovery' (9216 KB)... OKAY [ 1.482s]
writing 'recovery'... INFOPreflash validation failure
FAILED (remote: )
Flashing CDR....
sending 'cdrom' (216832 KB)... OKAY [ 32.854s]
writing 'cdrom'... INFOPreflash validation failure
FAILED (remote: )
Flashing Radio (BP)....
sending 'radio' (14408 KB)... OKAY [ 2.184s]
writing 'radio'... OKAY [ 2.262s]
Flashing WebTop....
sending 'webtop' (262144 KB)... OKAY [ 33.181s]
writing 'webtop'... OKAY [ 11.482s]
sending 'webtop' (262144 KB)... OKAY [ 37.456s]
writing 'webtop'... OKAY [ 10.655s]
sending 'webtop' (262144 KB)... OKAY [ 36.442s]
writing 'webtop'... OKAY [ 10.624s]
sending 'webtop' (262144 KB)... OKAY [ 37.456s]
writing 'webtop'... OKAY [ 10.670s]
sending 'webtop' (262144 KB)... OKAY [ 36.379s]
writing 'webtop'... OKAY [ 10.702s]
sending 'webtop' (54016 KB)... OKAY [ 7.753s]
writing 'webtop'... OKAY [ 2.449s]
Erasing Cache....
erasing 'cache'... OKAY [ 0.889s]
Rebooting....
rebooting...
ECHO ist ausgeschaltet (OFF).
ECHO ist ausgeschaltet (OFF).
Greets from the EternityProject!
Maybe your download is corrupted, check the Md5 or download it again just to be sure.
Jaocagomez said:
Maybe your download is corrupted, check the Md5 or download it again just to be sure.
Click to expand...
Click to collapse
I agree. The radio wouldn't be flashed if it was a wrong region rom.
Anyway, check your region razr in motorola support page. Check for ur warranty status ir will return ur razr region n carrier
Meanwhile: download and flash this with rsd lite 5.7
http://forum.xda-developers.com/showthread.php?t=1747800
Cheers
Sent from my XT910 using xda premium
my razr is on warranty, the region is DE. and i flash it again on the first reboot its starts and i was possible to login in my google account than the device went off
I checkt the logs on the booting process and on the bootloop.
you can see the logs from the logcat in the attached files, maybe someone see the problem for the bootloop
Related
Hello,
I've been using the leaked ICS version for GSM for about one week and this morning I tried to run some optimization script (motomize, I think). Since then it got stuck in a boot loop, remaining with the flashing M logo. Last operation I remember was running clean dalvik cache from the above application.
Got into recovery mode, cleaned dalvik cache -> same
Factory reset from recovery -> same
Used EPRJ_FlashITRZR_Windows.tar with the same image (SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip) and phone is now showing the dual core logo, screen going black, and after one minute the cycle repeats.
Tried several times to flash with the eternity tool and same result.
At first boot after flashing it shows the android on its back with the blue triangle. Pressing both vol keys shows the last log entries like:
Code:
E: can't mount /cache/recovery/....
...
E: can't open /cache/recovery/....
Output from eternity tool:
Code:
ECHO is off.
Flashing BootLogo....
sending 'logo' (854 KB)... OKAY [ 0.078s]
writing 'logo'... INFOno such partition
FAILED (remote: )
Flashing EBR....
sending 'ebr' (16 KB)... OKAY [ 0.249s]
writing 'ebr'... OKAY [ 0.483s]
Flashing MBR....
sending 'mbr' (16 KB)... OKAY [ 0.265s]
writing 'mbr'... OKAY [ 0.436s]
Flashing DevTree....
sending 'devtree' (512 KB)... OKAY [ 0.281s]
writing 'devtree'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android System....
sending 'system' (262144 KB)... OKAY [ 25.187s]
writing 'system'... OKAY [ 11.518s]
sending 'system' (262144 KB)... OKAY [ 27.961s]
writing 'system'... OKAY [ 10.583s]
sending 'system' (262144 KB)... OKAY [ 27.338s]
writing 'system'... OKAY [ 10.552s]
sending 'system' (6912 KB)... OKAY [ 0.733s]
writing 'system'... OKAY [ 0.343s]
Flashing Kernel....
sending 'boot' (8192 KB)... OKAY [ 0.810s]
writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android Recovery....
sending 'recovery' (9216 KB)... OKAY [ 1.964s]
writing 'recovery'... INFOPreflash validation failure
FAILED (remote: )
Flashing CDR....
sending 'cdrom' (216832 KB)... OKAY [ 22.023s]
writing 'cdrom'... INFOPreflash validation failure
FAILED (remote: )
Flashing Radio (BP)....
sending 'radio' (14404 KB)... OKAY [ 1.559s]
writing 'radio'... OKAY [ 1.761s]
Flashing WebTop....
sending 'webtop' (262144 KB)... OKAY [ 29.052s]
writing 'webtop'... OKAY [ 11.409s]
sending 'webtop' (262144 KB)... OKAY [ 29.941s]
writing 'webtop'... OKAY [ 10.598s]
sending 'webtop' (262144 KB)... OKAY [ 28.288s]
writing 'webtop'... OKAY [ 10.598s]
sending 'webtop' (262144 KB)... OKAY [ 28.818s]
writing 'webtop'... OKAY [ 10.614s]
sending 'webtop' (262144 KB)... OKAY [ 27.665s]
writing 'webtop'... OKAY [ 10.614s]
sending 'webtop' (54016 KB)... OKAY [ 5.284s]
writing 'webtop'... OKAY [ 2.416s]
Erasing Cache....
erasing 'cache'... OKAY [ 0.888s]
Rebooting....
rebooting...
ECHO is off.
ECHO is off.
Greets from the EternityProject!
Any more ideas?
brainwash123 said:
Hello,
I've been using the leaked ICS version for GSM for about one week and this morning I tried to run some optimization script (motomize, I think). Since then it got stuck in a boot loop, remaining with the flashing M logo. Last operation I remember was running clean dalvik cache from the above application.
Got into recovery mode, cleaned dalvik cache -> same
Factory reset from recovery -> same
Used EPRJ_FlashITRZR_Windows.tar with the same image (SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip) and phone is now showing the dual core logo, screen going black, and after one minute the cycle repeats.
Tried several times to flash with the eternity tool and same result.
At first boot after flashing it shows the android on its back with the blue triangle. Pressing both vol keys shows the last log entries like:
Code:
E: can't mount /cache/recovery/....
...
E: can't open /cache/recovery/....
Output from eternity tool:
Code:
ECHO is off.
Flashing BootLogo....
sending 'logo' (854 KB)... OKAY [ 0.078s]
writing 'logo'... INFOno such partition
FAILED (remote: )
Flashing EBR....
sending 'ebr' (16 KB)... OKAY [ 0.249s]
writing 'ebr'... OKAY [ 0.483s]
Flashing MBR....
sending 'mbr' (16 KB)... OKAY [ 0.265s]
writing 'mbr'... OKAY [ 0.436s]
Flashing DevTree....
sending 'devtree' (512 KB)... OKAY [ 0.281s]
writing 'devtree'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android System....
sending 'system' (262144 KB)... OKAY [ 25.187s]
writing 'system'... OKAY [ 11.518s]
sending 'system' (262144 KB)... OKAY [ 27.961s]
writing 'system'... OKAY [ 10.583s]
sending 'system' (262144 KB)... OKAY [ 27.338s]
writing 'system'... OKAY [ 10.552s]
sending 'system' (6912 KB)... OKAY [ 0.733s]
writing 'system'... OKAY [ 0.343s]
Flashing Kernel....
sending 'boot' (8192 KB)... OKAY [ 0.810s]
writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android Recovery....
sending 'recovery' (9216 KB)... OKAY [ 1.964s]
writing 'recovery'... INFOPreflash validation failure
FAILED (remote: )
Flashing CDR....
sending 'cdrom' (216832 KB)... OKAY [ 22.023s]
writing 'cdrom'... INFOPreflash validation failure
FAILED (remote: )
Flashing Radio (BP)....
sending 'radio' (14404 KB)... OKAY [ 1.559s]
writing 'radio'... OKAY [ 1.761s]
Flashing WebTop....
sending 'webtop' (262144 KB)... OKAY [ 29.052s]
writing 'webtop'... OKAY [ 11.409s]
sending 'webtop' (262144 KB)... OKAY [ 29.941s]
writing 'webtop'... OKAY [ 10.598s]
sending 'webtop' (262144 KB)... OKAY [ 28.288s]
writing 'webtop'... OKAY [ 10.598s]
sending 'webtop' (262144 KB)... OKAY [ 28.818s]
writing 'webtop'... OKAY [ 10.614s]
sending 'webtop' (262144 KB)... OKAY [ 27.665s]
writing 'webtop'... OKAY [ 10.614s]
sending 'webtop' (54016 KB)... OKAY [ 5.284s]
writing 'webtop'... OKAY [ 2.416s]
Erasing Cache....
erasing 'cache'... OKAY [ 0.888s]
Rebooting....
rebooting...
ECHO is off.
ECHO is off.
Greets from the EternityProject!
Any more ideas?
Click to expand...
Click to collapse
Follow this http://forum.xda-developers.com/showpost.php?p=26915046&postcount=6
http://forum.xda-developers.com/showthread.php?p=26915046
Post Nr. 6 is the usual way to unbrick the EU Leak.
Gesendet von meinem XT910 mit Tapatalk 2
All right, toooo slow.
Gesendet von meinem XT910 mit Tapatalk 2
Many thanks, I was able to recover it!
This should be sticky somewhere, this seems to be the only way to recover after some bad settings on the GSM ICS.
Fortunately the data/sdcard partition was not wiped, since that is where I keep my titanium backups and only sync them with the NAS once per week. Lesson learned.
Thanks again, that was fast.
brainwash123 said:
Many thanks, I was able to recover it!
This should be sticky somewhere, this seems to be the only way to recover after some bad settings on the GSM ICS.
Fortunately the data/sdcard partition was not wiped, since that is where I keep my titanium backups and only sync them with the NAS once per week. Lesson learned.
Thanks again, that was fast.
Click to expand...
Click to collapse
No problem, just remember to thanks the original poster of the guide ^^
Just as a follow-up, you don't need to do a factory reset. I messed up again today and by flashing boot_new, system_signed and Blur*zip I was back to the configuration I had before.
You're losing root though and any /system modifications you did, but everything else is there.
Hello, I have a One X but I have the Razr of a friend and I am a little confused.
He tells me that he try to root the phone with a program that he download after a few minutes of searching in google. Now the phone stucks on M logo and reboots, also I can´t totally turn off the phone he turns on randomly by itself and I can´t do anything.
I try to flash a fastboot file using this tut http://forum.xda-developers.com/showthread.php?t=1453660 but when the process ends and the phone reboots after the M logo it stucks on a black screen with an android logo with a red triangle.
I am totally lost now, I don´t know what I should do, I don´t understand why the Razr is restarting by itself and I can´t turn off it.
Also the bootloader version is 0A.74, if you need more info please tell me.
I check the next threads and links provided in XDA before post here:
Motorola tools for noobs: http://forum.xda-developers.com/showthread.php?t=1539192
EternityProject's Flashing Tool: http://forum.xda-developers.com/showthread.php?t=1453660
EternityProject's WEB: http://www.eternityproject.eu/topic/21-gsmcdma-reworked-fla****ed-motorola-razr-official-roms/
theunlocker: http://theunlockr.com/2012/01/24/how-to-restore-the-motorola-droid-razr-using-fastboot-files/
FastBoot files GingerBread: http://forum.xda-developers.com/showthread.php?t=1373868
FileFactory Folder with many Fastboot files: http://www.filefactory.com/f/7798fed97a5884d0/
First you should make sure you have all the tools in Motorola tools installed.
Download the corresponding firmware,
And then extract the firmware.zip fastboot file.
Then open up RSD lite, keep it there open.
Leave the Vol- and power button on the RAZR pressed. Then a black screen with some white text should appear....It should say something like "status: locked"...
Connect the RAZR to your computer, wait a bit, and RSD should detect it.
Load the xml that has been extracted form the zip in RSD lite, select the RAZR, and click start.
Now sit down and wait, it'll take a long time and will reboot various times, but at the end, you should have the RAZR working again.
Olao99 said:
First you should make sure you have all the tools in Motorola tools installed.
Download the corresponding firmware,
And then extract the firmware.zip fastboot file.
Then open up RSD lite, keep it there open.
Leave the Vol- and power button on the RAZR pressed. Then a black screen with some white text should appear....It should say something like "status: locked"...
Connect the RAZR to your computer, wait a bit, and RSD should detect it.
Load the xml that has been extracted form the zip in RSD lite, select the RAZR, and click start.
Now sit down and wait, it'll take a long time and will reboot various times, but at the end, you should have the RAZR working again.
Click to expand...
Click to collapse
First of all, thanks for answer me.
I have installed all the drivers that I found on all the TUT on XDA and also the RSD Lite. I did all the steps that you say and like other TUT says, RSD detect my phone properly and when I press start and select decompress and flash (or something like that) RSD stucks on the flash steps after decompress the zip file.
I don´t know if my problem is my bootloader version or maybe the zip file that I download. Can anyone help me finding a fastboot file for my phone? I don´t think that I forget to install any driver. Thanks in advance.
Mmm, with RSD, you should be opening a .xml file which comes from unzipping the fastboot .zip firmware...........
And to the firmware there are many, which vary upon your location.
What really matters with firmwares is choosing the correct GSM/CMDA version. GSM is any RAZR from anywhere in the world.. and CMDA is the RAZR from Verizon in the USA..........
If you have a GSM phone, I recomend downloading this fw:
http://sbf.droid-developers.org/umt..._SPYDERICSRETBRLA_ServiceCFC_fastboot.xml.zip
Unzipping it.
Do the steps I've mentioned, and choose the .xml file from RSD....
Cheers
Olao99 said:
Mmm, with RSD, you should be opening a .xml file which comes from unzipping the fastboot .zip firmware...........
And to the firmware there are many, which vary upon your location.
What really matters with firmwares is choosing the correct GSM/CMDA version. GSM is any RAZR from anywhere in the world.. and CMDA is the RAZR from Verizon in the USA..........
If you have a GSM phone, I recomend downloading this fw:
http://sbf.droid-developers.org/umt..._SPYDERICSRETBRLA_ServiceCFC_fastboot.xml.zip
Unzipping it.
Do the steps I've mentioned, and choose the .xml file from RSD....
Cheers
Click to expand...
Click to collapse
Ok, many many thanks again for the info. I´m downloading the FW that you post and my Razr is GSM. When I finish I post the result here.
Hello, after a full charge and download your recommended FW, I can´t flash it through RSD. Here is the error that I can see in RSD after RSD says rebooting bootloader two times.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that I try again to flash your FW with the eternity project tool and after the restart the phone automatically enters en the AP Fastboot Flash Mode screen and says "Boot Failure".
Also in the bottom of AP Fastboot Flash Mode screen I can read three new lines of text with the next message:
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0x0056)
Invalid CG OTV (CG: system)
Also this is the error that I have when I use the eternity project tool:
######################################
# EternityProject's FastBoot FlashME #
# #
# If you wanna support us, donate to #
# kholk -- [email protected] #
# #
# or come on our Website! #
# http://forum.eternityproject.eu #
# #
# Happy Flashing! #
######################################
ECHO está desactivado.
Flashing BootLogo....
sending 'logo' (854 KB)... OKAY [ 0.106s]
writing 'logo'... INFOno such partition
FAILED (remote: )
Flashing EBR....
sending 'ebr' (16 KB)... OKAY [ 0.184s]
writing 'ebr'... INFOPreflash validation failure
FAILED (remote: )
Flashing MBR....
sending 'mbr' (16 KB)... OKAY [ 0.266s]
writing 'mbr'... INFOPreflash validation failure
FAILED (remote: )
Flashing DevTree....
sending 'devtree' (512 KB)... OKAY [ 0.297s]
writing 'devtree'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android System....
sending 'system' (262144 KB)... OKAY [ 32.864s]
writing 'system'... OKAY [ 11.832s]
sending 'system' (262144 KB)... OKAY [ 29.236s]
writing 'system'... OKAY [ 10.396s]
sending 'system' (262144 KB)... OKAY [ 30.105s]
writing 'system'... OKAY [ 10.368s]
sending 'system' (6912 KB)... OKAY [ 0.822s]
writing 'system'... OKAY [ 0.334s]
Flashing Kernel....
sending 'boot' (8192 KB)... OKAY [ 0.938s]
writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android Recovery....
sending 'recovery' (9216 KB)... OKAY [ 1.176s]
writing 'recovery'... INFOPreflash validation failure
FAILED (remote: )
Flashing CDR....
sending 'cdrom' (216832 KB)... OKAY [ 24.111s]
writing 'cdrom'... INFOPreflash validation failure
FAILED (remote: )
Flashing Radio (BP)....
sending 'radio' (14420 KB)... OKAY [ 1.720s]
writing 'radio'... OKAY [ 2.221s]
Flashing WebTop....
error: cannot load 'webtop_signed'
Erasing Cache....
erasing 'cache'... OKAY [ 1.202s]
Rebooting....
rebooting...
ECHO está desactivado.
ECHO está desactivado.
Greets from the EternityProject!
I don´t understand what this new three lines means. I am totally worried about the Razr of my friend. Any help is highly appreciated.
It seems it is a CDMA phone.... It must be having troubles with the firmware....
Try this fw, it should work;
http://sbf.droid-developers.org/cdma_spyder/VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml.zip
EDIT:
Also, I forgot to mention. How are you charging your phone?
If it is not booting, and has a low battery, RSD won't flash!!
You should charge it before trying flashing again folowing this guide:
http://www.mydroidworld.com/topic/1...ut-a-special-cable-or-taking-the-phone-apart/
Olao99 said:
It seems it is a CDMA phone.... It must be having troubles with the firmware....
Try this fw, it should work;
http://sbf.droid-developers.org/cdma_spyder/VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml.zip
EDIT:
Also, I forgot to mention. How are you charging your phone?
If it is not booting, and has a low battery, RSD won't flash!!
You should charge it before trying flashing again folowing this guide:
http://www.mydroidworld.com/topic/1...ut-a-special-cable-or-taking-the-phone-apart/
Click to expand...
Click to collapse
The phone is fully charged with a normal wall charger, I don´t know why is a CDMA phone we live in Spain and buy it in The Phone House. Really thanks anyway Olao99.
Downloading the FW, after the flash process I post the results here.
Hello again, after download the new FW I have the same problem. Also I think that my device is only GSM, I can read in the back XT910. I don´t know what I should do. Thanks in advance.
:S
Probably region based problem...
Dunno your carrier, but this was the only spain fw I found:
http://sbf.droid-developers.org/umt...O_1C.91P_0A.6C_YOIES_CFC_HWp2b_SIGNED.xml.zip
If that doesn't work, give a try to various fws from europe from this list:
http://sbf.droid-developers.org/umts_spyder/list.php
I hope it finally works
Olao99 said:
:S
Probably region based problem...
Dunno your carrier, but this was the only spain fw I found:
http://sbf.droid-developers.org/umt...O_1C.91P_0A.6C_YOIES_CFC_HWp2b_SIGNED.xml.zip
If that doesn't work, give a try to various fws from europe from this list:
http://sbf.droid-developers.org/umts_spyder/list.php
I hope it finally works
Click to expand...
Click to collapse
Thanks again, the phone was buyed in Spain but it is free, I don´t now how to say in english, but my friend buy it in a store, not through Movistar, Vodafone or similar, maybe the correct word is uncarried, I don´t know. Anyway, now I´m downloading the FW from Yoigo - Spain, when I try to flash it again I post here the result.
EDIT.: Now I see that the bootloader version is 0A.6C, I don´t udnerstand anything.
The problem persists, I try with other GSM FW amd it´s the same with all. I don´t know what I should do. I´m start thinking that my friend Razr is totally bricked
This would be my last suggestion:
http://downloadandroidrom.com/file/DroidRazr/unroot/DroidRazrUtility1.8.zip
If that doesn't work,
I think I've ran out of options.... Sorry
Try sending a PM to these guys, they know a lot of stuff:
pedrotorresfilho
HSD Pilot
I hope they can help you out
Olao99 said:
This would be my last suggestion:
http://downloadandroidrom.com/file/DroidRazr/unroot/DroidRazrUtility1.8.zip
If that doesn't work,
I think I've ran out of options.... Sorry
Try sending a PM to these guys, they know a lot of stuff:
pedrotorresfilho
HSD Pilot
I hope they can help you out
Click to expand...
Click to collapse
Downloading the tool, anyway you offer all your knowledge, really thanks man I´m very grateful. I play with the tool this afternoon and if I can´t revive the phone maybe I try to contact with these guys.
Hello again, with the Droid Razr Tool seems that I have the same problem that I have with eternityproject tool. anyway really thanks for your help, effortr and time.
Also this is the log from Droid Razr Tool:
[*] Simple Razr Restore
[*] Windows Version
[*] Created by mattlgroff
[*]
[*] Before continuing, ensure your Razr is in the
[*] "AP Fastboot" mode and connected via USB.
[*]--- Also press the keys after the screen flashes back on when asked---
[*] IF YOUR PHONE SAYS STATUS 1 UNLOCKED EXIT NOW AND EMAIL ME
[*] YOU HAVE AN UNLOCKED BOOTLOADER! ! ! ! !
[*] [email protected]
[*]
Presione una tecla para continuar . . .
sending 'mbm' (512 KB)... OKAY [ 0.078s]
writing 'mbm'... OKAY [ 0.515s]
rebooting into bootloader... OKAY [ 0.296s]
Press any key AFTER the screen comes back on
Presione una tecla para continuar . . .
sending 'mbmloader' (42 KB)... OKAY [ 0.016s]
writing 'mbmloader'... OKAY [ 0.296s]
sending 'mbm' (512 KB)... OKAY [ 0.328s]
writing 'mbm'... OKAY [ 0.484s]
rebooting into bootloader... OKAY [ 0.281s]
Press any key AFTER the screen comes back on
Presione una tecla para continuar . . .
sending 'devtree' (512 KB)... OKAY [ 0.078s]
writing 'devtree'... INFOPreflash validation failure
FAILED (remote: )
sending 'system' (262144 KB)... OKAY [ 32.136s]
writing 'system'... OKAY [ 11.248s]
sending 'system' (262144 KB)... OKAY [ 31.606s]
writing 'system'... OKAY [ 10.374s]
sending 'system' (130816 KB)... OKAY [ 16.177s]
writing 'system'... OKAY [ 5.210s]
sending 'boot' (8192 KB)... OKAY [ 1.030s]
writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
sending 'recovery' (9216 KB)... OKAY [ 1.295s]
writing 'recovery'... INFOPreflash validation failure
FAILED (remote: )
sending 'preinstall' (262144 KB)... OKAY [ 32.261s]
writing 'preinstall'... INFOimage bigger than partition
FAILED (remote: )
sending 'webtop' (262144 KB)... OKAY [ 30.311s]
writing 'webtop'... OKAY [ 11.762s]
sending 'webtop' (262144 KB)... OKAY [ 32.495s]
writing 'webtop'... OKAY [ 10.452s]
sending 'webtop' (262144 KB)... OKAY [ 32.198s]
writing 'webtop'... OKAY [ 10.421s]
sending 'webtop' (262144 KB)... OKAY [ 32.479s]
writing 'webtop'... OKAY [ 10.452s]
sending 'webtop' (262144 KB)... OKAY [ 32.308s]
writing 'webtop'... OKAY [ 10.468s]
sending 'webtop' (54272 KB)... OKAY [ 6.724s]
writing 'webtop'... OKAY [ 2.402s]
sending 'radio' (21900 KB)... OKAY [ 2.652s]
writing 'radio'... OKAY [ 1.966s]
Trying to flash fastboot SPYDERIRD_U.01.26.0_SPD-IRD-21_SIGN_ASIA_OPERATOR.xml.zip
Code:
######################################
# EternityProject's FastBoot FlashME #
# #
# If you wanna support us, donate to #
# kholk -- [email protected] #
# #
# or come on our Website! #
# http://forum.eternityproject.eu #
# #
# Happy Flashing! #
######################################
ECHO is off.
Flashing BootLogo....
sending 'logo' (854 KB)... OKAY [ 0.081s]
writing 'logo'... INFOno such partition
FAILED (remote: )
Flashing EBR....
sending 'ebr' (16 KB)... OKAY [ 0.292s]
writing 'ebr'... OKAY [ 0.513s]
Flashing MBR....
sending 'mbr' (16 KB)... OKAY [ 0.293s]
writing 'mbr'... OKAY [ 0.440s]
Flashing DevTree....
sending 'devtree' (512 KB)... OKAY [ 0.264s]
writing 'devtree'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android System....
sending 'system' (262144 KB)... OKAY [ 19.436s]
writing 'system'... OKAY [ 21.778s]
sending 'system' (262144 KB)... OKAY [ 19.224s]
writing 'system'... OKAY [ 21.755s]
sending 'system' (262144 KB)... OKAY [ 17.734s]
writing 'system'... OKAY [ 22.386s]
sending 'system' (6912 KB)... OKAY [ 0.655s]
writing 'system'... OKAY [ 0.250s]
Flashing Kernel....
sending 'boot' (8192 KB)... OKAY [ 0.780s]
writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android Recovery....
sending 'recovery' (9216 KB)... OKAY [ 1.014s]
writing 'recovery'... INFOPreflash validation failure
FAILED (remote: )
Flashing CDR....
sending 'cdrom' (216832 KB)... OKAY [ 18.323s]
writing 'cdrom'... INFOPreflash validation failure
FAILED (remote: )
Flashing Radio (BP)....
sending 'radio' (14408 KB)... OKAY [ 1.201s]
writing 'radio'... OKAY [ 2.534s]
Flashing WebTop....
error: cannot load 'webtop_signed'
Erasing Cache....
erasing 'cache'... OKAY [ 0.981s]
Rebooting....
rebooting...
ECHO is off.
ECHO is off.
Greets from the EternityProject!
Press any key to continue . . .
Failure to reboot; getting a Invalid Flash Mode (S) Boot Failure
Invalid CG OTV(CG; webtop); Invalid SP Data
Invalid CG HAB(CG, webtop, status: 0X0056)
Invalid CG OTV(CG; webtop)
Youre getting this error because of missing webtop partition, and I think you're trying to flash GB. If your doing it over ICS then I am not sure if you can do it directly, however to resolve your current error download the fastboot file for Asia or EU both will work fine for you and use RSD to flash it, worked for me.
Search for Razr ICS leak and you can find it, and not the OTA the complete one. I cannot post the link but it is available on Eternity project website just google it.
Not sure if it helps but I was actually on ICS and wanted to upgrade to the JB leak. Erased my CID but forgot to pull the cid.img file off the phone onto my PC.
Am I screwed or is there a way to resolve this?
Flashing WebTop....
error: cannot load 'webtop_signed'
Click to expand...
Click to collapse
Invalid CG HAB(CG, webtop, status: 0X0056)
Click to expand...
Click to collapse
You're missing the image for webtop partition. And that's why it doesn't boot.
fooyonghwee said:
Not sure if it helps but I was actually on ICS and wanted to upgrade to the JB leak. Erased my CID but forgot to pull the cid.img file off the phone onto my PC.
Am I screwed or is there a way to resolve this?
Click to expand...
Click to collapse
If you have deleted the cid w/o backup then i guess you're not really screwed. You can still run your mobile but will have to boot using BP tools every time.
But you will only be able to flash the Verizon JB leak once you have restored your webtop partition.
Can you try to flash latest EU ICS rom with RSDlite.
I hope you backed-up your CID? if so, first restore it than flash EU rom.
fooyonghwee said:
Not sure if it helps but I was actually on ICS and wanted to upgrade to the JB leak. Erased my CID but forgot to pull the cid.img file off the phone onto my PC.
Am I screwed or is there a way to resolve this?
Click to expand...
Click to collapse
You said you forgot to pull it out from your phone but if you had backed it up using the terminal emulator than the image will be available in the root of your sd card you can easily restore it using fastboot once you have access to your internal memory, just open command window in your pc and type : fastboot restore cid cid.img remember to keep the image file in the same folder as fastboot file and everything will work out fine.
AP Fastboot Flash Mode (S) (Flash Failure)
OA.74
eMMC Info: 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer mode:
USB Connect
invalid CG OTV (CG: system): invalid SP data
invalid CG HAB (CG: system, status: 0X004E)
invalid CG OTV (CG: system)
this is my phone display after I try flash xt910 file on xt912. I try flash rom stock but it fail 11/16. I use utility 1.82, and it is result. help me plz
help me .plz
Do not use the Razr Utility 1.8.2. When I tried to install a stock version of ICS it bricked my phone.
You need to download the RSD Lite 5.7 or newer and found a stock rom which is suitable to your phone and your region (country).
Then you will flash it to your phone using the RSD Lite. Some roms can show failures during the process, but I think it's normal, because I tried six times before succeed in the flashing process.
Good luck!
it is result when i use utility 1.82. i appriciate any solution.
[*] Simple Razr Restore
[*] Windows Version
[*] Created by mattlgroff
[*]
[*] Before continuing, ensure your Razr is in the
[*] "AP Fastboot" mode and connected via USB.
[*]--- Also press the keys after the screen flashes back on when asked---
[*] IF YOUR PHONE SAYS STATUS 1 UNLOCKED EXIT NOW AND EMAIL ME
[*] YOU HAVE AN UNLOCKED BOOTLOADER! ! ! ! !
[*] [email protected]
[*]
Press any key to continue . . .
sending 'mbm' (512 KB)... OKAY [ 0.081s]
writing 'mbm'... OKAY [ 0.490s]
rebooting into bootloader... OKAY [ 0.277s]
Press any key AFTER the screen comes back on
Press any key to continue . . .
< waiting for device >
sending 'mbmloader' (42 KB)... OKAY [ 0.014s]
writing 'mbmloader'... OKAY [ 0.299s]
sending 'mbm' (512 KB)... OKAY [ 0.303s]
writing 'mbm'... OKAY [ 0.484s]
rebooting into bootloader... OKAY [ 0.276s]
Press any key AFTER the screen comes back on
Press any key to continue . . .
< waiting for device >
sending 'devtree' (512 KB)... OKAY [ 0.080s]
writing 'devtree'... OKAY [ 0.513s]
sending 'system' (262144 KB)... OKAY [ 28.829s]
writing 'system'... OKAY [ 10.730s]
sending 'system' (262144 KB)... OKAY [ 31.778s]
writing 'system'... OKAY [ 10.264s]
sending 'system' (130816 KB)... OKAY [ 14.564s]
writing 'system'... OKAY [ 5.126s]
sending 'boot' (8192 KB)... OKAY [ 0.816s]
writing 'boot'... OKAY [ 0.934s]
sending 'recovery' (9216 KB)... OKAY [ 0.896s]
writing 'recovery'... OKAY [ 1.397s]
sending 'preinstall' (262144 KB)... OKAY [ 27.600s]
writing 'preinstall'... INFOimage bigger than partition
FAILED (remote: )
sending 'radio' (21900 KB)... OKAY [ 2.071s]
writing 'radio'... OKAY [ 1.953s]
It is recommened to wipe data, especially if you were on a custom rom.
If you don't you will probably bootloop and have to wipe anyway...
Press any key to Wipe the phone's data (NOT SDCARD(S)) or exit the utility.
Press any key to continue . . .
erasing 'userdata'... OKAY [ 1.619s]
erasing 'cache'... OKAY [ 0.864s]
sending 'radio' (21900 KB)... OKAY [ 2.078s]
writing 'radio'... OKAY [ 1.949s]
rebooting into bootloader... OKAY [ 0.277s]
You are now on stock 6.16.211. Please boot normally by holding down power.
Please make a selection or hit ENTER to return:
help me plz
no one can help me
Same problem
Sent from my LT30p using xda app-developers app
deathpnc said:
no one can help me
Click to expand...
Click to collapse
No one can help you because you are not listening. MichelBFR suggested RSD Lite.. we understand you're using Droid utility 1.82. That's your problem. Flash a new ROM using RSD lite. If you can't figure that out, you probably shouldn't have been messing with kernels and ROMS in the first place.
Hi all I introduce myself, I am new to all this from xda, and I need help urgently, update my motorola razr ics 4.0.4 to JB since i was all good, the upgrade me very hard one week, after that performance the battery low too until one day it did not catch on discharge and more, when connected to the USB wall charger and carrying not connect to pc only a white LED lit, try flashing the factory cable, which resulted in obtube mode to enter the fasboot however every effort was useless since flash series of errors appeared and until this day and could not fix it because it comes up when trying to flash motorola logo and then restarts, the battery does not charge and whatever you do either through eternityprj_Fla**** Rds lite or the result is always the same "INFOPreflash validation failure" sorry if I could not explain in a good way but my English helped a translator is not the best (I'm from chile)
Greetings to all and I hope you can help me!!
######################################
ECHO ist ausgeschaltet (OFF).
Flashing BootLogo....
sending 'logo' (854 KB)... OKAY [ 0.109s]
writing 'logo'... INFOno such partition
FAILED (remote: )
Flashing EBR....
sending 'ebr' (16 KB)... OKAY [ 0.250s]
writing 'ebr'... OKAY [ 0.484s]
Flashing MBR....
sending 'mbr' (16 KB)... OKAY [ 0.203s]
writing 'mbr'... OKAY [ 0.437s]
Flashing DevTree....
sending 'devtree' (512 KB)... OKAY [ 0.172s]
writing 'devtree'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android System....
sending 'system' (262144 KB)... OKAY [ 38.328s]
writing 'system'... OKAY [ 12.137s]
sending 'system' (262144 KB)... OKAY [ 40.622s]
writing 'system'... OKAY [ 10.546s]
sending 'system' (262144 KB)... OKAY [ 40.622s]
writing 'system'... OKAY [ 10.561s]
sending 'system' (6912 KB)... OKAY [ 1.076s]
writing 'system'... OKAY [ 0.343s]
Flashing Kernel....
sending 'boot' (8192 KB)... OKAY [ 1.154s]
writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
Flashing Android Recovery....
sending 'recovery' (9216 KB)... OKAY [ 1.482s]
writing 'recovery'... INFOPreflash validation failure
FAILED (remote: )
Flashing CDR....
sending 'cdrom' (216832 KB)... OKAY [ 32.854s]
writing 'cdrom'... INFOPreflash validation failure
FAILED (remote: )
Flashing Radio (BP)....
sending 'radio' (14408 KB)... OKAY [ 2.184s]
writing 'radio'... OKAY [ 2.262s]
Flashing WebTop....
sending 'webtop' (262144 KB)... OKAY [ 33.181s]
writing 'webtop'... OKAY [ 11.482s]
sending 'webtop' (262144 KB)... OKAY [ 37.456s]
writing 'webtop'... OKAY [ 10.655s]
sending 'webtop' (262144 KB)... OKAY [ 36.442s]
writing 'webtop'... OKAY [ 10.624s]
sending 'webtop' (262144 KB)... OKAY [ 37.456s]
writing 'webtop'... OKAY [ 10.670s]
sending 'webtop' (262144 KB)... OKAY [ 36.379s]
writing 'webtop'... OKAY [ 10.702s]
sending 'webtop' (54016 KB)... OKAY [ 7.753s]
writing 'webtop'... OKAY [ 2.449s]
Erasing Cache....
erasing 'cache'... OKAY [ 0.889s]
Rebooting....
rebooting...
ECHO ist ausgeschaltet (OFF).
ECHO ist ausgeschaltet (OFF).
Greets from the EternityProject!
Since you have updated to the jelly bean, there is not way back to ICS. But there is way how to unbrick it. Just follow this tutorial by HSD-Pilot in this topic. But the difference is you need to take your system_signed file on the RSD Lite file you flashed
http://forum.xda-developers.com/showthread.php?t=2232704
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
Since you have updated to the jelly bean, there is not way back to ICS. But there is way how to unbrick it. Just follow this tutorial by HSD-Pilot in this topic. But the difference is you need to take your system_signed file on the RSD Lite file you flashed
http://forum.xda-developers.com/showthread.php?t=2232704
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
thank you very much friend will try to do the tutorial right away to see if it revives my motorola, thank you very much:good::good::laugh:
TheMrcool212 said:
Since you have updated to the jelly bean, there is not way back to ICS. But there is way how to unbrick it. Just follow this tutorial by HSD-Pilot in this topic. But the difference is you need to take your system_signed file on the RSD Lite file you flashed
http://forum.xda-developers.com/showthread.php?t=2232704
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Once I did the first part I flash the vast majority of the files except the "boot" then restart the computer and I get this
Invalid flash mode (s) (boot failure)
0A.6C
to return to normal mode - first press power key to power down
Device is locked. Status Code: 0
Battery OK
OK to program
Transfer Mode:
USB Connected
Invalid CG OTV (CG: system) Invalid SP Data
Invalid CG HAB (CG: system, status: 0x0056)
Invalid CG OTV (CG: system)
Esto.Vir said:
Once I did the first part I flash the vast majority of the files except the "boot" then restart the computer and I get this
Invalid flash mode (s) (boot failure)
0A.6C
to return to normal mode - first press power key to power down
Device is locked. Status Code: 0
Battery OK
OK to program
Transfer Mode:
USB Connected
Invalid CG OTV (CG: system) Invalid SP Data
Invalid CG HAB (CG: system, status: 0x0056)
Invalid CG OTV (CG: system)
Click to expand...
Click to collapse
I'm stucked in the same way... Waiting for someone have luck and post the files/solution.
Flash the European jelly bean OTA in the stock recovery. You missed the last step
Sent from my GT-I9300 using xda app-developers app
upgrade your bootloader to OA.77
Sent from my XT910 using xda app-developers app
kcchoo63 said:
upgrade your bootloader to OA.77
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
which would be the steps and files need to perform this procedure?
Motorola RAZR XT910 brick no solution
Then follow this step-- http://forum.xda-developers.com/showthread.php?t=2231289
then ur phone should be ok.
kcchoo63 said:
Then follow this step-- http://forum.xda-developers.com/showthread.php?t=2231289
then ur phone should be ok.
Click to expand...
Click to collapse
which of the four options would appear there that I need in my case?
help!
hi boys
My cell phone battery and antenna signal is lost
You may see me in this field panache!
I'm sorry for the bad language