Hello,
When I press the standby button on my X10, my screen goes black, which is normal. Lately, my screen goes black but immediately after that it returns to the lock screen, and I have to press it twice or more to get it black.
Is this software or hardware related and how can I solve this? Running Wolfbreak's ROM and Doomkernel V6. Running Wolf for about a year now and suddenly this problem starts showing up.
Hi,
its complicated, because might be both. If you used power button very often and/or your X10i is older it might be hardware issue.
I recommend you try different rom first and try it. If it would be the same, then replacement of power button should be the last fix . In that case I might help you with that.
kr1st0f1 said:
Hello,
When I press the standby button on my X10, my screen goes black, which is normal. Lately, my screen goes black but immediately after that it returns to the lock screen, and I have to press it twice or more to get it black.
Is this software or hardware related and how can I solve this? Running Wolfbreak's ROM and Doomkernel V6. Running Wolf for about a year now and suddenly this problem starts showing up.
Click to expand...
Click to collapse
Seems like I fixed the problem by wiping cache and dalvik cache. I'm not sure which one actually solved it. So it was software related.
Thanks for the help anyway!
Related
weird and terribly disappointing. Once in atleast 15 unlocks, when I press the power/wake button, screen just doesnt respond. I try to swipe, but no response. But when I press wake button to turn off screen and press it again, theres no issues. This happens only during unlocking screen. Did anyone face this issue?
rest all is good..no lag..once unlocked phone works perfectly...no lag..no getting stuck..again, let me tell u this issue happens once in 15-20 lock/unlocks.
I think I have the same issue as you, but in case I don't I will post what I am seeing on my device.
In about the same frequency, say once in every 15 unlocks from phone sleeping, the screen will come on but will be completely unresponsive. Doesn't matter if it is swipe unlock or pin code etc, there is no response to touch input on the screen. In fact, I think the screen is just frozen or the operating system is causing the lock screen to hang.
If the lock screen is hanging, pressing power will:
(a) sometimes make the phone sleep again
(b) make the phone screen kind of glitch/blip and then it takes input again
(c) does nothing and the screen remains on and hung/frozen
Occasionally mashing both the volume key and power key will help fix it, but usually if it is completely stuck I have to do a hard reset (holding HOME+VOL UP+POWER and then selecting reboot from the menu).
Now - I think this could be an app, but not sure.
When I first got the phone, set it up with my Google account etc, it went ahead and downloaded ALL the apps I had installed on my previous phone (HTC Sensation running Android ICS). So if it is an app, it is having issues with this phone, not the OS, imo.
I uninstalled all those automatically downloaded apps, and used the phone for a bit without my normal stuff installed. Then started installing apps singularly.
I think it is either Facebook or Alarm Clock Xtreme. The latter makes more sense given it would be polling the system to find out when to go off, so it is doing more in the background I would expect than Facebook or any other non-system app.
Other apps I have installed/running:
Swiftkey X
3G watchdog
Dolphin Browser HD
ES File Explorer
Winamp (locks without this running or running at all in lock screen mode, so that is not the issue)
Real Calc
Google Drive
Facebook
Alarm Clock Xtreme
It is quite frustrating for a brand new phone to have these issues. Not sure if it is hardware related, and if it is, I want to find out soon so I can take it back to carrier within their 28day device swap RMA period.
Thoughts?
So others may try to help or identify the possible cause / fix .......
What is your firmware version?
Are you rooted, custom ROMs or Mods etc?
Stock ROM,Baseband : XXLE8. Build No :XXALE9.
But my screen responds after i press wake button again. You are right seems to be issue with the app. i will just compare your apps and below are the ones which are common between us.
Facebook
3G watchdog
Dolphin Browser HD --i never use
Google Drive
a fix that worked for me
Steps to the solution that worked for me (so far) were to uninstall:
1. Alarm Clock Extreme (no noticeable result but I wasn't needing that application anyway)
2. I had WIFI Fixer installed because of the problems I experienced with the WIFI connectivity on my Galaxy S3.
I disabled that application and problems seemed to go away for a time, but every so in a while they resurfaced. Much less often than before, though.
I was still stuck with my WIFI problem anyway, so I looked into solutions for that problem and since I could not find a workable solution I uninstalled Wifi Fixer and started tweaking my WIFI settings.
While doing that I noticed that disabling "Network Notification" under the Settings -> WIFI -> Advanced tab fixed both my problems.
Now I can't be 100% sure this solution works for all, but I am pretty sure the application that created the problem was "WIFI Fixer".
It's been more than 4 hours now without the "disabled unlock screen from hell", and I’m very happy.
LOOOL
Actually...
My WIFI problem was not solved.... but I found a solution on another forum , which you can read below:
I dialed *#0011# then pressed menu button, then selected WIFI, and pressed the button to turn off the "WIFI power save mode". Hit back until I was back in the homescreen. WIFI has worked to my satisfaction ever since.
This is not a solution, this is a work-around....
It will remove the standby wifi.... My phone was at 0% battery in one night... But actually yes, the phone doesn't hang up when unlocking.
Someone who had replaced the phone could tell me if the problem is solved with a new one ?
calint said:
My WIFI problem was not solved.... but I found a solution on another forum , which you can read below:
I dialed *#0011# then pressed menu button, then selected WIFI, and pressed the button to turn off the "WIFI power save mode". Hit back until I was back in the homescreen. WIFI has worked to my satisfaction ever since.
Click to expand...
Click to collapse
Sadly having the same issue! and only sing LG6 and LG8 of the UK firmware was release.. out the box was LG4 if I am not mistaken... have been putting off custom roms due to the fact stock one is so far good..
This fix seems to be working..Thanks! will live with battery drain as data is expensive in SA!
khan.dharvesh said:
weird and terribly disappointing. Once in atleast 15 unlocks, when I press the power/wake button, screen just doesnt respond. I try to swipe, but no response. But when I press wake button to turn off screen and press it again, theres no issues. This happens only during unlocking screen. Did anyone face this issue?
rest all is good..no lag..once unlocked phone works perfectly...no lag..no getting stuck..again, let me tell u this issue happens once in 15-20 lock/unlocks.
Click to expand...
Click to collapse
This looks like a bug from wifi, i had the same problem and i found a fix:
On the dialer type: *#0011#
Then press menu -> wifi, there is a button ON ( power saving or something ), change it to OFF.
let me know if it solves ur problem
It worked!!
douglasurbano said:
This looks like a bug from wifi, i had the same problem and i found a fix:
On the dialer type: *#0011#
Then press menu -> wifi, there is a button ON ( power saving or something ), change it to OFF.
let me know if it solves ur problem
Click to expand...
Click to collapse
This worked for me!!! Thank you!! I was about to take a hammer to this phone! :good:
I seem to have another problem. When unlocking the phone the screen turns on in a quite ok amount of time, but then when I touch it immediatelly after it turns on it doesn't react to touch. This moment when touch is not working is getting longer and longer depending on how long the system is running, anybody else sees this?
RhavoX said:
I seem to have another problem. When unlocking the phone the screen turns on in a quite ok amount of time, but then when I touch it immediatelly after it turns on it doesn't react to touch. This moment when touch is not working is getting longer and longer depending on how long the system is running, anybody else sees this?
Click to expand...
Click to collapse
Not sure what ROM and kernel you are using, but at a big guess, try reflash another kernel or with less aggressive settings.
Sent from my GT-I9300 using xda premium
hey guys. I have a problem with my s3's lock screen similar to the described. whenever I press the power button to unlock, it takes 2 second for the screen to turn on. Anyone got any ideas on that?
Is this only me to has this problem?
When I do screenshot by motion, it stuck at "saving screenshot..." most of the time.
Sometimes a reboot works. But after a few moments, the problem comes again.
Any way to solve this problem?
I'm currently using Omega V37.1 - XXELC.
Probably rom problem. Omega v40 is out, you might look at upgrading
Firmware issue I think. I too have had this happen. Pain in the butt.. But you can also take a screenshot by simultaneously pressing and holding your home+power button.
Hi, so sorry for the vague thread title, but really, there's no other way to describe it. So here's what happened.
For the past few weeks (or month), my Xperia Ray has had a problem of switching on after it was put into standby mode, i.e. after i pressed the lock button. The screen would light up, however would remain blank. So all I would get is a bright black screen.
I could have lived with this for a few more months (until Xperia Z gets released in my country D: ) however this problem started getting worse. At first, after pressing the home button, the volume rockers and/or the lock button for about 20 times, the screen would turn on (finally). Despite it giving me that bright black screen, i could still operate the screen. I could still try to unlock it because of the haptic feedback on my lockscreen. I could still change music tracks on my music widget on my lockscreen. In short, the screen worked perfectly, only that it kinda wouldn't show. However, for the past week, the only way to turn it back on would be to do a battery pull and switch on the phone again. And it recently developed a problem of giving me that bright black screen again when I switch it on, causing me to do about 5 battery pulls before being able to actually use my phone again.
I did get fed up with this problem, being a heavy user of my phone. Therefore, today I decided to try to do a factory reset of my phone, intending to wipe the dalvik cache + clear all user data, thinking it might help my bright black screen problem. However, I found that I couldn't boot into recovery because all my phone would do was to give me that bright black screen again! So after many battery pulls, I managed to boot up my phone normally and do a factory reset under the backup & restore tab in settings. Of course, the phone tried to reboot itself, but of course, just gave me the bright black screen.
I kinda gave up at this point, and did many battery pulls and boots, however, all I got was either
1. the terrible bright black screen
or less frequently
2. the free xperia project logo then the terrible bright black screen.
I did get very fed up, so I plugged it into a wall socket to charge it. However, since about an hour or two ago, I realised it may be on bootloop. When I plug it into a wall socket, the free xperia project logo shows up and then an even brighter black screen shows up for about 3-5 minutes, then those two repeat endlessly. The notification light doesn't show that it's charging at all.
Okay here's background info on my phone.
- Is rooted
- Bootloader is unlocked
- CM 9.1 is installed
- Was running GO Launcher (if that helps)
- had a custom boot animation
- I think i deleted an apk for the google start up configuration thing...the one that asks if you have any google accounts you want to connect when you switch on your phone for the first time. I'll search up the correct apk name if you need it.
- Is about a year old (got it last early April)
- is a Sony Ericsson Xperia Ray (in case you didn't notice haha)
- battery level was about 20%+ when I did a factory reset (terrible of me I know)
- I have tried to caliberate the battery a few months ago
That's all the background info I can think you need. Please do let me know if you need any other info. If you need the logcat text of what happens when I hit the lock button at the top of my phone and the phone gives me the bright black screen (the early stages of this problem), let me know and I'll dig it up. I think I've bricked it, but I can't boot it into recovery so I can't do anything. And I did all I could google for the bright black screen problem which I won't tire you by specifying here. Please do help me. It seems as if the worst of evils has befallen my phone. Now I'm stuck here with my phone crazily on bootloop beside me. Please please do help.
Flash stock rom
Just try flashing a stock rom with Flashtool. If the problem persists, then it could be a hardware problem. Flashing a stock ftf takes care of all software issues. Get the stock ics FTF file and place it in firmwares folder of flashtool. Start flashtool and select flash mode. Then choose your ftf and press ok. Then wait until it prompts you to connect your phone. Then, just turn off your phone, while holding the power button down attach the USB cable. The LED notification should turn green and wait until it finishes flashing.
flash extended stock kernel and then the stock ftf firmware file...
hit thanks if i helped u
I have the same problem on my Xperia Mini (ST15i) I use Pureness rom and Mesa Kernel... ((
Benlux1 said:
I have the same problem on my Xperia Mini (ST15i) I use Pureness rom and Mesa Kernel... ((
Click to expand...
Click to collapse
Hi, if your phone can still be switched on and hasn't progressed so far in being destroyed, you could try downloading the Disable Auto Brightness app for Xperia phones from the Play Store. I've read somewhere that the screen might not turn on because of the auto brightness. I'm not sure if it actually helps, but perhaps my phone would have died faster without it. I've read of people changing their battery, doing battery calibrations or changing their screen to fix the problem. But before you change the hardware, I suggest that you check the hardware first. If the Disable Auto Brightness doesn't work, do a Nandroid backup and store the backup somewhere safe. Then flash the stock firmware to your phone and try to get it to switch on. Do flash the firmware before your phone runs out of battery because you never know, your phone may decide to refuse to charge your battery anytime. Then try to switch it on. If your phone goes into a bootloop (like mine now) really consider getting a new phone or sending it for repair or try all day to fix it if you use your phone alot. I'm still trying to fix mine.
I flashed the original firmware for my phone, tried to turn it on, was very happy when I saw the original Xperia logo, but then I realised it was on bootloop. When I tried to charge it, it immediately turns on and goes into bootloop again. Logcat doesn't detect my phone, so I can't obtain the logcat of what's happening. I haven't tried to replace the battery of my phone because I couldn't find a supplier. But I'll go on trying to fix my phone until the day that it really breaks down. Good luck with yours and keep us posted.
Sent from my MT25i using xda app-developers app
Hi all,
I have a Xperia U rooted with DevSwift JellyBean Lite v6 and it works really fine. The only problem is it doesn't switch off the screen, and by this I mean it turns black but there's still light, so it like instead of turning off it just display full black.
Anyone had this problem??
I had 15 seconds to turn off in the display options in settings and nothing happens.
Buc89 said:
Hi all,
I have a Xperia U rooted with DevSwift JellyBean Lite v6 and it works really fine. The only problem is it doesn't switch off the screen, and by this I mean it turns black but there's still light, so it like instead of turning off it just display full black.
Anyone had this problem??
I had 15 seconds to turn off in the display options in settings and nothing happens.
Click to expand...
Click to collapse
Same if you press the power button?
What do you mean by "nothing happens"?
ChikeD said:
Same if you press the power button?
What do you mean by "nothing happens"?
Click to expand...
Click to collapse
I mean that normally when you press the power button(also for lock) it turns off the screen, and by that I mean not even background light.
Mine only turns the screen black and there's some background light left.
In a full dark room it will be enough loom to see something.
By nothing happens I mean that if this state of black screen doesn't change to turn off screen after 15 seconds. It just stays like that.
Buc89 said:
By nothing happens I mean that if this state of black screen doesn't change to turn off screen after 15 seconds. It just stays like that.
Click to expand...
Click to collapse
When the screen is on it go to this state, and same when you press power? Just to clarify.
Did you install the MOD on clean stock followed installation instructions etc?
ChikeD said:
When the screen is on it go to this state, and same when you press power? Just to clarify.
Did you install the MOD on clean stock followed installation instructions etc?
Click to expand...
Click to collapse
When I'm using the phone and left it after 15 seconds it goes to this state of black screen, same as if I push the power button.
Yes, I followed the instructions, CWM, wipe the 3 caches and install. Everything works fine except this thing.
Buc89 said:
When I'm using the phone and left it after 15 seconds it goes to this state of black screen, same as if I push the power button.
Yes, I followed the instructions, CWM, wipe the 3 caches and install. Everything works fine except this thing.
Click to expand...
Click to collapse
There is a second option require flash of XP system before have you tried that?
flash the lightbar fix zip separately and see if it sorts it.
Sent from my AOSP 4.3 Xperia S via Tapatalk
Try with other JB Kernel..
It may help I think
Make Sure U have been rooted !
I found a solution
Buc89 said:
Hi all,
I have a Xperia U rooted with DevSwift JellyBean Lite v6 and it works really fine. The only problem is it doesn't switch off the screen, and by this I mean it turns black but there's still light, so it like instead of turning off it just display full black.
Anyone had this problem??
I had 15 seconds to turn off in the display options in settings and nothing happens.
Click to expand...
Click to collapse
I had exactly the same problem...
I tried changing kernel (between ExperimentalU-Stock-9.0c4 & Experimental-U-12_KERNEL) and also tried changing rom version (to 7_ULTRA_LITE version) and the problem still stood until I found out that the problem is not from the rom or kernel, you should wipe data/cache partition/dalvik cache ONLY before installing the rom. DO NOT wipe anything after installing the rom. I did it and it worked for me... I hope It work for you too...
Hello,
I have a very strange problem with my Xperia Z2. After unlocking the display on the device is blank. You can see the brightness, the touch works, because when I swipe my fingers I can hear android sound but there is no picture. I must do "lock - unlock" pattern 3-4 times, sometimes even more to get the display work properly. I tried to fix it by using software repair but it didnt work, and also
factory reset. Its just so iritating, I cant even lock my phone anymore, I try to keep the display on as much as possible if someone trys to call me so I can answer it. Device is currently running on Existenz ROM but the issue started on the stock so I flashed custom rom but it didn't help. So this is probably a hardware problem and if it is, what could be broken ( is it display, GPU,whatever ) or it could be a software problem ? Any help would be appreciated.
Can you see your lockscreen?
iXaidyiu said:
Can you see your lockscreen?
Click to expand...
Click to collapse
No, no the "lock-unlock pattern" is reffered to simply pressing the unlock button on the phone. There is just blank display and light is on as I mentioned but no picture. After pressing button many times the picture finaly comes and then it's normal. It only happens when phone goes to sleep mode or after I lock it.
If your phone reboots can you see the SONY logo and the boot animation as well?
iXaidyiu said:
If your phone reboots can you see the SONY logo and the boot animation as well?
Click to expand...
Click to collapse
Nope, there is nothing. Just a sound and LED works, and blank screen. Then again, when the phone finally reboots, pressing lock-unlock button will do the trick. It seems like, when I dont touch the phone longer time, it's harder to get screen on. But when I constantly work with the phone there is no need for that amount of "lock - unlock button move".
mby RIP graph.. try flashtools..
YamyYugi said:
mby RIP graph.. try flashtools..
Click to expand...
Click to collapse
It's probably hardware, now it's just a question of repair cost and is it worth it ?
TechCODE said:
Nope, there is nothing. Just a sound and LED works, and blank screen. Then again, when the phone finally reboots, pressing lock-unlock button will do the trick. It seems like, when I dont touch the phone longer time, it's harder to get screen on. But when I constantly work with the phone there is no need for that amount of "lock - unlock button move".
Click to expand...
Click to collapse
I think this is due to a faulty LCD screen, but the digitalizer seems fine. So maybe you could consult some local repair shops and prove if my hypothesis is correct. But first of all you should try also flashing another kernel (eg elite kernel) first to see if it is a software issue rather than a hardware issue.
Sent from my Sony D6503 using XDA Labs