Just wondering if anyone has successfully set up their gamepad through this app? I can config most of it but when it comes to the right analog stick, i just can't get to work.. i.e, it'll go left but it won't go right... or up. Right analog stick works no worries.
Can't seem to find and youtube videos about it either..
Do you have the dock?
Would think a USB controller would work if you are connected to the keyboard dock and plug something into it.
dock doesnt work sadly
Yes I am connecting the game pad through the dock. It works for support games .. I can map out most of the buttons for nova, except for one.. which is right analog stick
Sent from my GT-I9300 using xda app-developers app
How you maped the change weapon button?
I dont have NOVA but i ve found that on Dead Trigger and Shadowgun, the wired xbox360 works perfectly with the dock
Related
I just got this app on my Galaxy Tab 10.1 using a Logitech F310 controller, switchable between X Input and Direct Input modes. After flashing a kernel module for X Input mode to work, I set up a "driver" in the app to map all the buttons/joysticks, then assigned those to DPAD UP/DOWN/LEFT/RIGHT, button 1, button 2, etc. After mapping all of those in emulators, they work great.
One small problem though: no analog support on the joysticks. The driver creation part of the USB/BT Joystick Center app recognizes the full analog range, but I seem to only be able to assign it to on/off buttons. Thus, I only get to toggle between zero and full range movement, nowhere in between.
Is there a way to fix this, maybe using another app?
I've been looking for an answer to this as well... It's nice that I can now use all the buttons on my Xbox 360 controller, but I sure would like to have true analog stick support!
I got this app too but just cant figure out how to set it up, are there any help pages for it? tring to set up an old FF joystick which is recognised by the app but dont know where to proceed, thanks.
klub242 said:
One small problem though: no analog support on the joysticks. The driver creation part of the USB/BT Joystick Center app recognizes the full analog range, but I seem to only be able to assign it to on/off buttons. Thus, I only get to toggle between zero and full range movement, nowhere in between.
Is there a way to fix this?
Click to expand...
Click to collapse
There is an Analog-Key Option update available. At this time two N64 emus are supporting this.
Hey guys,
Don't know if anyone will get mad for posting this but the "Gears of War" style game Shadowgun just barely released about 30min. ago on the tegra market.
This is pretty cool as us Photon users get too show off the power of our tegra phone first before other androids get it released at a later date.
https://market.android.com/details?id=com.madfingergames.shadowgun
http://www.tegrazone.com/games/shadowgun
$4.99 not too bad actually considering there going to enable usb support
Thought I would share, enjoy!
you try it yet before I buy it?
AJC9000 said:
you try it yet before I buy it?
Click to expand...
Click to collapse
Ya i did, played through the 1st level it's really good. The game looks like a unreal engine console game. The one thing that's impressing me a lot is the controls, compared to nova this is a lot more accurate. Another thing that is awesome compared to the ipod counterpart is it has gamepad support for joystick controllers, gonna get my ps3 controller hooked up later today and might get an hdmi cable as well. Not bad for 4.99!
i'm having a hard time getting the game to recognize the ps3 controller using the sixaxis app
anybody have any luck?
Edit: controller mappings to be able to play the game
figured it out. had to go into the settings of the sixaxis controller app and check the box next to bypass IME and then reconfigure button mappings in the sixaxis setting.
dpad center is for fire i set that to both R2 and R! plus the start key to be able to select menu options.
7 is for reload and i set that to L1 and L2
J is for analog 2 left
L is for analog 2 right
I is for analog 2 up
K is for analog 2 down
dpad left for analog 1 left
dpad right for analog 1 right
dpad up for analog 1 up
dpad down for analog 1 down
back for select which pause the game
off i go now to play!! hope this helps. if it does plz thank
edit 2: now i need to figure out switching weapons
A is for shotgun set that to square
D is for SMG set that to x
Nice well looks like I'll have to tab a few games to my sprint account lol
jbuggydroid said:
i'm having a hard time getting the game to recognize the ps3 controller using the sixaxis app
anybody have any luck?
Edit: controller mappings to be able to play the game
figured it out. had to go into the settings of the sixaxis controller app and check the box next to bypass IME and then reconfigure button mappings in the sixaxis setting.
dpad center is for fire i set that to both R2 and R! plus the start key to be able to select menu options.
7 is for reload and i set that to L1 and L2
J is for analog 2 left
L is for analog 2 right
I is for analog 2 up
K is for analog 2 down
dpad left for analog 1 left
dpad right for analog 1 right
dpad up for analog 1 up
dpad down for analog 1 down
back for select which pause the game
off i go now to play!! hope this helps. if it does plz thank
edit 2: now i need to figure out switching weapons
A is for shotgun set that to square
D is for SMG set that to x
Click to expand...
Click to collapse
Awesome! I haven't bought the game yet, but I think I will. I use a bluetooth keyboard with my Iconia Tab (also with Tegra 2) so hopefully this means I can use my keyboard If not, I've got USB gamepads somewhere
jbuggydroid said:
i'm having a hard time getting the game to recognize the ps3 controller using the sixaxis app
anybody have any luck?
Edit: controller mappings to be able to play the game
figured it out. had to go into the settings of the sixaxis controller app and check the box next to bypass IME and then reconfigure button mappings in the sixaxis setting.
dpad center is for fire i set that to both R2 and R! plus the start key to be able to select menu options.
7 is for reload and i set that to L1 and L2
J is for analog 2 left
L is for analog 2 right
I is for analog 2 up
K is for analog 2 down
dpad left for analog 1 left
dpad right for analog 1 right
dpad up for analog 1 up
dpad down for analog 1 down
back for select which pause the game
off i go now to play!! hope this helps. if it does plz thank
edit 2: now i need to figure out switching weapons
A is for shotgun set that to square
D is for SMG set that to x
Click to expand...
Click to collapse
W for the Grenade Launcher!
Awesome and I'm going to assume S is for the fourth weapon
Sent from my MB855 using XDA App
Is there any way to map the fire button to the camera button on the phone? I really wish more apps had this option. I can do it with the emulators I have.
Sent from my MB855 using xda premium
I'll have to see
Sent from my MB855 using XDA App
Tried to find a way to map camera button but was not able too
Sent from my MB855 using XDA App
Ya I'm still stumped too.
Sent from my MB855 using xda premium
Honestly the on screen controls work pretty well. Played only the first two levels with the controller. The rest I played using the on screen controls
Sent from my MB855 using XDA App
jbuggydroid said:
Edit: controller mappings to be able to play the game
Click to expand...
Click to collapse
http://forums.androidcentral.com/sp...oller-setup-shadowgun-photon-tested-only.html
Sadly I might end up buying this game twice since they didn't release a T2/3 update but a whole new game
I have a couple questions about this and I couldn't find any clear answers.
First of all, I connected by plugging into the dock and using the native bluetooth pairing in ICS. Everything looked like it was working great, played some SNES roms just fine. But when I went to map keys for N64 roms, I found out my right analog stick isn't being detected at all except for pressing it. I even tried mapping the right analog to other keys that had already worked but that didn't work. How can I fix that?
Also, I read that analog input is now accepted (ie: The analog sticks actually act like analog instead of digital buttons), how do I get that working? Is that only available through the Sixaxis app? Has anyone gotten the analog working properly in emulators (like being able to control your walking speed in Mario64)?
Other info: Running stock .15, unrooted, standard DS3 controller, have dock if necessary.
Edit: I decided to actually test it and the true analog does actually work just fine. I was just assuming that since you could only map "DPAD_LEFT", etc. that it was mapping digital button presses. But I played some Ocarina of Time and the analog works perfectly. I still wasn't able to get the right analog to detect though. I tried unpairing and re-pairing to no avail.
I'm just taking a shot in the dark here but the original N64 controller only had 1 analog stick. If the N64oid emulator you are using is designed based off of the original N64 controller, That would explain why you can not map the right analog stick in it.
Lostsorrow said:
I'm just taking a shot in the dark here but the original N64 controller only had 1 analog stick. If the N64oid emulator you are using is designed based off of the original N64 controller, That would explain why you can not map the right analog stick in it.
Click to expand...
Click to collapse
I don't think that would be the problem. SNES had no analog and I can map the left analog for it just fine. Also, I can navigate through homescreens and such with my left analog, so I went into the inputs menu and changed the right analog to be the same inputs as the left and it doesn't work anywhere on the Prime.
So I think it's the Prime itself not recognizing the input. I'll try rooting and using the Sixaxis app tonight and see if that works.
I used the sixasis app the other day and it worked perfectly. I haven't done it yet, but I believe you can fully map it anyway you wish
Modded by MBOK
Alright, now I'm even more confused. I rooted and installed Sixaxis and it works great, started detecting my right analog just fine. I opened up N64oid, mapped all the keys which worked fine...I tested all the buttons, most of which are just mapped to letters and they were being detected by the N64oid app. But when I open up Ocarina of Time, nothing at all worked, not even the buttons that worked before. So I turned off Sixaxis and reconnected natively with ICS. Right stick stopped being detected all together but I was able to move around in OoT.
What the eff? Any ideas?
Yup.....me too.
I'm using the sixasis app and it says you can map buttons but its real confusing. It works in gta3 but I hate the button layout and have no clue how to change it up.
Modded by MBOK
Just a quick update: I figured out why Sixaxis wasn't working in N64oid. There's an option, brilliantly hidden nowhere in input options, to "enable IME input". Just checked that and everything worked perfectly...almost. The analog sticks became digital after that but I did have an outdated version of Sixaxis, so I updated but haven't gotten a chance to set everything up again. Will check it out tonight.
So are you saying you got the right analog stick to map properly at some point with N64oid?
I've tried everything I can and the right analog stick, even though mapped as Z and ZR as opposed to X and Y which are pretty much the same as DPAD commands, still registers the same as the left one and the dpad buttons.
It's driving me nuts, because the right analog stick is what I would prefer to have as my C buttons.
buxtahuda said:
So are you saying you got the right analog stick to map properly at some point with N64oid?
I've tried everything I can and the right analog stick, even though mapped as Z and ZR as opposed to X and Y which are pretty much the same as DPAD commands, still registers the same as the left one and the dpad buttons.
It's driving me nuts, because the right analog stick is what I would prefer to have as my C buttons.
Click to expand...
Click to collapse
I played with it some more over the weekend with an updated Sixaxis app and I'm still having the same issue: I either have a left stick with working analog but no right stick, or I have both sticks working but they're only digital.
If I set Sixaxis to "Gamepad" it uses the ICS native gamepad ability, which doesn't detect the right stick.
If I set it to Keyboard Emulation it can only map digital inputs but it detects both sticks.
I have no idea, I'll email the Sixaxis team later and see if they know how to fix it.
Any idea what the keycode for the rumblepak on a dualshock 3 controller is?
Bandin03 said:
Just a quick update: I figured out why Sixaxis wasn't working in N64oid. There's an option, brilliantly hidden nowhere in input options, to "enable IME input". Just checked that and everything worked perfectly...almost. The analog sticks became digital after that but I did have an outdated version of Sixaxis, so I updated but haven't gotten a chance to set everything up again. Will check it out tonight.
Click to expand...
Click to collapse
The way i would like to map my n64oid controller is left analog to move, dpad as dpad and right analog as c- buttons..
can someone help me with that, im also rooted with sixaxis but also have a usbport!
Once your controller is properly connected with the Sixaxis Controller app:
1) In the Sixaxis Controller app go to settings button, preferences, gamepad settings, and check off "enable gamepad."
2) set Sixaxis Controller as the Default IME (Aka default input method). go to the android settings app, Language and input, change the Default IME to Sixaxis controller. Keep in mind that if you want to type something the keyboard won't show up until you change the Default IME back to android keyboard. If you tap on a text box there will be a keyboard icon in your notification tray or status bar with which you can quickly change the default IME back to android keyboard without navigating to settings.
The controller should now work with dual analog sport! You might need to change mappings from app to app... for me the Mupen64 n64 emulator works great with dual analog support. (Originally it didn't work and when looking for help that's how I found this post )
Relatively new prime owner here and I just purchased the dock from best buy.
Is there any way I can use the arrow keys or WASD on the keyboard and map them to the controls of a game in an emulator or really any game with controller support?
Some of the joystick apps have means to map keyboard input to on-screen button presses. I know USB/BT Joystick does this, and I think the Sixaxis does too.
Sixaxis app works great for syncing your ps3 controller up..
Sent from my SGH-I777 using Tapatalk 2
wwr8bz said:
Relatively new prime owner here and I just purchased the dock from best buy.
Is there any way I can use the arrow keys or WASD on the keyboard and map them to the controls of a game in an emulator or really any game with controller support?
Click to expand...
Click to collapse
USB/BT Joystick center works good to play games with keyboard
Play Modern Combat with Mouse & Keyboard
Asus Prime & Tapatalk
some games like shadowgun you can set keyboard keys for actions as if it were a computer game. More and more games are doing this because lots of people use apps like sixaxis to pair bluetooth controllers or keyboards to phones to play games.
And i would go with sixaxis personally, you can set regions of the screen to press, swype actions, its pretty awesome stuff (tho you need root for most of em)
Also unrelated but why are the 1 and 6 highlighted on the keyboard? Is there some sort of special shortcut they have?
Sent from my Transformer Prime TF201 using XDA
I'd like to know this as well.. The up and down arrows are highlighted in a similar way. Any clues what that means?
Thanks!
MrSimmonsSr
wwr8bz said:
Also unrelated but why are the 1 and 6 highlighted on the keyboard? Is there some sort of special shortcut they have?
Click to expand...
Click to collapse
MrSimmonsSr said:
I'd like to know this as well.. The up and down arrows are highlighted in a similar way. Any clues what that means?
Thanks!
MrSimmonsSr
Click to expand...
Click to collapse
Yes, ASUS has done this for many years on all their laptop keyboards. It's to help you identify certain important keys when in low light conditions. It makes those keys stand out from the others.
That is to say, there aren't any shortcuts to be found. It isn't a secret and there's nothing cryptic about it. Just a quick way to get oriented when the only light in the room is the screen, which is on minimum brightness.
wwr8bz said:
Is there any way I can use the arrow keys or WASD on the keyboard and map them to the controls of a game in an emulator or really any game with controller support?
Click to expand...
Click to collapse
Basically the APP should support the keys, some do, for example FPSE - PSX emulator for Android, has keyboard support.
Is there some sort of special shortcut they have?
Click to expand...
Click to collapse
the only special shortcut I am aware of is Shift+BackSpace - Delete key
(forward delete, not back delete, useful for text editing)
Hey guys, Im using a wired xbox 360 controller with my samsung note 10.1 and have downloaded FPSe, Im using USB/BT joystick centre and can only seem to program one analog stick to work instead of both.
Ive tried in the settings of FPSe to get two analog sticks controls up but then I lose the function buttons (cross, square, triangle, circle) or whatever theyre called if that makes sense?
Is there any way to be able to use both analog sticks and these function buttons all at once or do I just have to refrain from dual stick games?
Cheers for any help.