Related
So I've tried to find an answer to this but to no avail....
I have Nero V3 working well, but I wanted to add back the "Audio Postcards" apk just for the wacky photo frames and effects. I've tried to install it both by getting the .apk and doing a prompted install = which looks all fine but ends in "Application not installed".
I also tried Roman's Java program to reinstall from "flash.zip" using recovery mode(have it on my other pc) which put back the other TMobile apps but not Audio Postcards. I've tried putting the .apk in the proper folder via root explorer and changed the permissions to match everything else. Each and every time I get what appears to be a normal install but then "Application not installed".
It's not that great of an app to be sure, but now it has me hooked on figuring out how to get it back. Since I don't see any other posts on this I'm assuming it's something I'm doing wrong. Like I said I've read other posts on how to install from an .apk and I've followed the information and have had success with everything but this app.
Anyone else have this issue or have any insight they can offer?
Thanks in advance for any help or direction....
What happened?
I had this same problem, and did everything to get it reinstalled and it still won't show up.
I have heard that you don't need to reinstall it, just put the .apk and .odex files in system/apps and make sure they have the right permission and user group assignments (root.root). I did that, and it still won't show up. Trying to install it gets the "not installed" message.
I tried to install it using adb, but I got the following error message:
./adb install /Android/AudioPostcard.apk
2125 KB/s (11202488 bytes in 5.147s)
pkg: /data/local/tmp/AudioPostcard.apk
Failure [INSTALL_FAILED_DEXOPT]
There are two reasons why I want to get this fixed: one, because when the next update appears I want to be able to install it, and it won't install (as we all know) without the bloatware. Secondly, I'm trying to learn more about the platform, and doing things like this teaches me how to use adb and increases my knowledge about how it all works.
I'll post this as a question as well, but I did it here to see if the other user had fixed this. Thanks.
running vegan and i keep getting this message. I think my wife was using it and maybe the battery died? not sure. any thoughts?
thanks
I get this about every 2 weeks. I boot into clockwork, reset to defaults, then restore from backup.
sent from my g-tablet using tapatalk
i got it. found the answer in the android general forums. You have to delete a database and it clears it up.
Steps
Posting the steps you took might be a little more helpful to anyone reading your thread.....
gpzjack said:
i got it. found the answer in the android general forums. You have to delete a database and it clears it up.
Click to expand...
Click to collapse
Which data base?
Do you mean perform a clear cache/data?
or are you mentioning the contact database sync from gmail?
from another post:
I noticed at least two people in this thread have had this problem. The following worked for me... At one point I started getting this error also. Driving me crazy! Could not bring up the keyboard, and the message would pop like every 5 seconds. I searched and found this post (thanks and credit to KinkyMunkey):
process com.android.acore FC and how i fixed it
I didn't want to wipe data, so I tried it. I couldn't use ES File Explorer for this, but Root Explorer worked great!
The problem is a corrupt contacts sqlite database. As the referenced post says, you'll be able to tell if thats the problem when there is a .db-journal file in the folder. The folder is /data/data/com.android.providers.contacts/databases/ *Note* this is not the data folder in sdcard, but the data folder in root (/).
Just delete the databases folder in /data/data/com.android.providers.contacts and restart. The contacts database will be rebuilt and re-synced.
This has worked for me twice (thank goodness). I don't know what causes the contacts DB to get messed up... it wasn't a drained battery for me.
Thank you so much, this worked for me!
gpzjack said:
from another post:
I noticed at least two people in this thread have had this problem. The following worked for me... At one point I started getting this error also. Driving me crazy! Could not bring up the keyboard, and the message would pop like every 5 seconds. I searched and found this post (thanks and credit to KinkyMunkey):
process com.android.acore FC and how i fixed it
I didn't want to wipe data, so I tried it. I couldn't use ES File Explorer for this, but Root Explorer worked great!
The problem is a corrupt contacts sqlite database. As the referenced post says, you'll be able to tell if thats the problem when there is a .db-journal file in the folder. The folder is /data/data/com.android.providers.contacts/databases/ *Note* this is not the data folder in sdcard, but the data folder in root (/).
Just delete the databases folder in /data/data/com.android.providers.contacts and restart. The contacts database will be rebuilt and re-synced.
This has worked for me twice (thank goodness). I don't know what causes the contacts DB to get messed up... it wasn't a drained battery for me.
Click to expand...
Click to collapse
I also had the "android.process.acore process has stopped" problem. I seem to have fixed it by going to "Manage Apps", "Running", "Contacts Storage", "Clear Data", then same process for Contacts Sync Adapter. Seems to have resolved problem...so far.
yup the contacts storage got corrupted -> most likely you created an empty contact in the contacts app by mistake. Someone should sticky this - i see one of these threads daily haha. Its a pretty common problem.
many time that error (fc) is due to a contact with blank first and last name as the contact database uses them as index. if you have blanks the probem will keep returning.
thanks for the tip - seems to have helped me out of the
...acore... problem
Mind you, I **Never** touched the contacts app in any
way whatsoever.
The corruption happened "spontaneously"
After playing (it is *only* suitable for play) with android
for a few weeks now, you know what, android is CRAP
Cant get to Manage Apps
Everytime I go to settings the damn thing pops up. Cant get to anything to clear the data base. Dont have root explorer and cant find that in the file manager I do have.
Any help?
cassycan said:
Everytime I go to settings the damn thing pops up. Cant get to anything to clear the data base. Dont have root explorer and cant find that in the file manager I do have.
Any help?
Click to expand...
Click to collapse
I had this problem just tonight. Thanks to GPZJack for posting the file to delete. For those of you who can't launch programs because of the "force close" dialog, here is how to do it without that.
1) Install the android developer kit on your PC. You will need the program adb (short for android debugger). I tried to post a link to the instructions, but am too noobish for the forum to allow me to post links. Just google android sdk install
2) Attach gtablet to computer using usb cable
3) [Assuming windows] Launch a command window. cd to tools directory under the android sdk install directory.
4) type the command "adb devices" (without quotes) to verify that adb sees your tablet. If not, you need to install the correct usb drivers. Find help with google gtablet usb driver install
5) type the command "adb shell" (without quotes) This will connect you to the tablet and provide you with a unix shell prompt #
!! Careful with this next command. It will delete the databases directory. Make sure you type the line correctly so that you don't accidentally delete something else.
6) #rm -r /data/data/com.android.providers.contacts/databases
7) #reboot
And your tablet should reboot and work.
Hope that helps!
Norm Minske said:
I also had the "android.process.acore process has stopped" problem. I seem to have fixed it by going to "Manage Apps", "Running", "Contacts Storage", "Clear Data", then same process for Contacts Sync Adapter. Seems to have resolved problem...so far.
Click to expand...
Click to collapse
I was unable to see the folder described in other peoples solutions, your solution of clearing data through the settings application worked great for me on brilliant corners 1.3.1. Thanks.
simuloid said:
I had this problem just tonight. Thanks to GPZJack for posting the file to delete. For those of you who can't launch programs because of the "force close" dialog, here is how to do it without that.
1) Install the android developer kit on your PC. You will need the program adb (short for android debugger). I tried to post a link to the instructions, but am too noobish for the forum to allow me to post links. Just google android sdk install
2) Attach gtablet to computer using usb cable
3) [Assuming windows] Launch a command window. cd to tools directory under the android sdk install directory.
4) type the command "adb devices" (without quotes) to verify that adb sees your tablet. If not, you need to install the correct usb drivers. Find help with google gtablet usb driver install
5) type the command "adb shell" (without quotes) This will connect you to the tablet and provide you with a unix shell prompt #
!! Careful with this next command. It will delete the databases directory. Make sure you type the line correctly so that you don't accidentally delete something else.
6) #rm -r /data/data/com.android.providers.contacts/databases
7) #reboot
And your tablet should reboot and work.
Hope that helps!
Click to expand...
Click to collapse
i manage to get tru the issue on adb shell by installing usb deview, n my command bar alrdy shown my device no. after typing adb devices but aft adb shell, came $ and not #, is there any different?
okay i had mine miracle- ly and not realising it done, my force stop no longer appear after downloading the latest busybox apps.=)
Hi - I was getting the acore error too. but I went ahead & did an nvflash. The error is still popping up. Any ideas?
So here's the deal. I'm getting in to some dirty work with Ninjamorph, but after finishing a project, I know it does not resign an .apk. When I try to put the .apk I've modded through Signapktic it spits out the error: "which: applet not found".
Typing which into the terminal emulator yields the same result. Apparently I'm a serious noob when it come to androids, because Busybox is installed and I thought which would have been added to the commands at that point. How do I get which to work? Because being able to do all this modding on the phone is ridiculously convenient.
So, I failed, and didn't realize there was a new busybox version available. which is now working on my phone.
Signapktic, however, does nothing. I click start, it says it's been given su permissions, and then says finished (the terminal log is empty).
I hope someone can help me. I have a 16gb nook tablet that I rooted using the method described here http://liliputing.com/2012/03/how-to-dual-boot-cyanogenmod-7-nook-tablet-os-with-a-microsd-card.html over a year ago and I've never had an issue until last weekend. My daughter was playing a game and the nook started acting up. The touch screen became unresponsive and the screen started to flash. I let the Nook charge overnight and when I turned it on the next day the screen became stuck at the white Nook welcome screen. After 20 minutes I tried the holding down power and N button to see if I could get it to restart, but unfortunately that may have made it worse. Now my Nook won't start at all. I've read many many threads here on how to fix it, but I am not tech savvy in the slightest. The first thing I tried was Rays method http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/ but instead of getting the green checkmark I got the red X and the "nook is shutting down" message. I tried so many things that I cannot remember them all but I do know that one of the methods I tried I got this message.
E:Can’t mount / cache/recovery/command/
E:Can’t mount / cache/recovery/log/
E:Can’t open / cache/recovery/log/
E:Can’t mount / cache/recovery/last_log/
E:Can’t open / cache/recovery/last_log
After that I tried to use the method described here http://forum.xda-developers.com/showpost.php?p=24995518&postcount=1 and I did make the booktable cwm-sd and I went to lavero.burgos' thread to download the mmcblk files, but they weren't there.
Also I don't understand what adb is but I'm desperate, when I found the thread that explained it and tried to download the ADB + Fastboot + Drivers.zip that was in said thread (I'm sorry I can't remember which thread it was) the zip file didn't work.
I'm really sorry for posting yet another, "please help my nook is borked" thread but after all the reading I've done this past week the only thing I've become is very confused and frustrated. Thank you in advance to anyone who can help.
Notice on the link you posted
Ray Waldo; said:
If this procedure fails, try one of these:
Celtic has a possible solution on XDA here: http://forum.xda-developers.com/showthread.php?t=1513583
Succulent has more info on his Github page: https://github.com/succulent/acclaim_recovery_sdcard.
Click to expand...
Click to collapse
I can see how you got lost. There aren’t really any detailed instructions there.
I got the following zip from 2nd link
Flash the zip with CWM then try the bn_142_factory_recovery.zip SD card again and you should get a green checkmark this time.
udownwitopp said:
Notice on the link you posted
I can see how you got lost. There aren’t really any detailed instructions there.
I got the following zip from 2nd link
Flash the zip with CWM then try the bn_142_factory_recovery.zip SD card again and you should get a green checkmark this time.
Click to expand...
Click to collapse
Thank you for your reply. I will try this tonight and hopefully it will work.
Well I tried, and I hate asking but how exactly does someone add a zip file to an sd card after an image has been flashed to it? I've tried numerous times with sd cards of various sizes and I'm pretty sure I should have been able to do this with a 16gb card, but every time I try to drag and drop the flashstock zip over onto the card it says that there is no room available. Now I have been doing a lot of reading on here and I'm pretty sure I did not set the card up right, I did format it correctly with the sdformatter program, but I'm guessing I have to do something with the partitions on the card. I am not familiar with the programs because I've never had cause to use them before so I am not entirely sure how to do that. I tried following the directions found here http://forum.xda-developers.com/showpost.php?p=24995518&postcount=1 but I couldn't figure out how to enable boot, and lba flags. I realize that this has probably all been answered already, but again, there programs are so foreign to me that I'm not even sure what to look up first. Thank you again for any help that any one can give me.
evm22 said:
Well I tried, and I hate asking but how exactly does someone add a zip file to an sd card after an image has been flashed to it? I've tried numerous times with sd cards of various sizes and I'm pretty sure I should have been able to do this with a 16gb card, but every time I try to drag and drop the flashstock zip over onto the card it says that there is no room available. Now I have been doing a lot of reading on here and I'm pretty sure I did not set the card up right, I did format it correctly with the sdformatter program, but I'm guessing I have to do something with the partitions on the card. I am not familiar with the programs because I've never had cause to use them before so I am not entirely sure how to do that. I tried following the directions found here http://forum.xda-developers.com/showpost.php?p=24995518&postcount=1 but I couldn't figure out how to enable boot, and lba flags. I realize that this has probably all been answered already, but again, there programs are so foreign to me that I'm not even sure what to look up first. Thank you again for any help that any one can give me.
Click to expand...
Click to collapse
I'll try to explain the process for you. "The Red X" is a very common issue that people have with their devices. It's usually caused by digging into something that you don't fully understand. It's VERY important to understand the process of flashing custom ROMs because it could screw up your tablet, delete ROM partitions and such.
The first issue you need to attend to is "The Red X." First download the bn_142_factory_recovery.zip from the ray waldo site found here:
http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/
Unzip the zip file and you should have a repart.img. Use win32diskimager to write this to an SD card. Once it's done writing, put the SD card in your device and it should boot from SD card and flash stock B&N 1.4.2 to your nook (if you have problems booting from SD card plug in the USB to your computer).
If you still get "The Red X" during this process please use the following method:
http://forum.xda-developers.com/showthread.php?t=1513583
If you have further problems please post or PM me. Once you have the issue fixed I HIGHLY recommend using the SDC version. It's a lot easier than the Internal Version and will prevent mistakes from happening.
Thank you for responding. I retried the method described on Ray's site, but sadly it's still a no go. I have downloaded the parted binary and I know how to get it onto the sd card, but what I don't know is how to ADB into my device. I'm not even sure I understand what ADB is.
evm22 said:
Thank you for responding. I retried the method described on Ray's site, but sadly it's still a no go. I have downloaded the parted binary and I know how to get it onto the sd card, but what I don't know is how to ADB into my device. I'm not even sure I understand what ADB is.
Click to expand...
Click to collapse
I'm not extremely knowledgeable with the ADB tool, but it's setting up your computer so you can write commands into your command prompt that will execute actions on your device. The link for setting it up is here:
http://forum.xda-developers.com/showthread.php?t=1474956
Once you get it set up just follow the rest of the directions in the parted binary post.
datallboy said:
I'm not extremely knowledgeable with the ADB tool, but it's setting up your computer so you can write commands into your command prompt that will execute actions on your device. The link for setting it up is here:
http://forum.xda-developers.com/showthread.php?t=1474956
Once you get it set up just follow the rest of the directions in the parted binary post.
Click to expand...
Click to collapse
Thank you for a link to the post with a working zip file for adb, I've downloaded and I've tried to follow the video, but unfortunately my laptop will not read my nook at all. Every time I connect it with a usb my device manager tries to find it, but it blinks, makes an error sound and I see
OMAP4330 under other devices. I' did a search for that error and came across this thread, but again the instructions call for installing an apk on the nook and since I can't get mine to turn on, it's a no go
evm22 said:
Thank you for a link to the post with a working zip file for adb, I've downloaded and I've tried to follow the video, but unfortunately my laptop will not read my nook at all. Every time I connect it with a usb my device manager tries to find it, but it blinks, makes an error sound and I see
OMAP4330 under other devices. I' did a search for that error and came across this thread, but again the instructions call for installing an apk on the nook and since I can't get mine to turn on, it's a no go
Click to expand...
Click to collapse
There is a possibility you could have deleted some partitions important to the nook then. Have you tried making an sdc version of cm10 to see if it could boot at all? You could see if you still have the device information to backup, recreate the partitions and flash back to stock.
Use this to make a bootable cm10 card:
http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
Just write the image file to an SD card and put it in your nook. It will boot into cm10. Once there go into your file manager and turn on root access. Go to your root drive/ROM/devconf to access all your device information. Make a backup of all them. There is a picture of my devices root drive. If you do not have the various partitions you will have to recreate them. There is a method on the Nook General Thread for doing this named "Unbrick Internal Partitions On NT" or something similar. You can use that recreate the internal partitions essential for your nook.
If you deleted the ROM partition with the Nook's product information you may be out of luck. The serial number and Mac address are the most essential, and can be found on your device hardware. The SN is under the SD slot (if readable) and Mac address is located inside your device. Not sure where I've never opened my nook to look, but probably on the WiFi chip.
Slight chance you may be able to fix it with this information and the rest of the device information you can use from a different nook since it doesn't have to do with internet and registration. There may be a way to fix that, but I don't know of any.
Best of luck. If you have problems just post a reply or send me an email.
I can get the Nook to turn on with the bootable cm10 card in it. I get the cyanoboot screen and see the boot menu, but honestly I don't know where to go from there. I think it's time for me to try and find someone who understands all of the programs involved in trying to fix this because I know I'm going to end up making things worse, if that's even possible. Thank you for trying to help me though. I do appreciate it
evm22 said:
I can get the Nook to turn on with the bootable cm10 card in it. I get the cyanoboot screen and see the boot menu, but honestly I don't know where to go from there. I think it's time for me to try and find someone who understands all of the programs involved in trying to fix this because I know I'm going to end up making things worse, if that's even possible. Thank you for trying to help me though. I do appreciate it
Click to expand...
Click to collapse
Hello! Did you ever figure out how to resurrect your Nook? I had trouble signing in Gmail and wanted to just unbrick and have the plain Nook again. I've been struggling getting the device to boot from the sd card with the repart imaged. I'm trying to get back to the ClockworkMod recovery screen but I can't at that moment. Someone suggested that I "flash" the B&N zip to the card but I'm trying to figure out how to do that.
Would love help!
I'm trying to root my phone using the Lelus method. As far as I know, I'm following the instructions to the letter. When I get to the actual flashing step, using the ICS T-mobile rom, I get the same "Scheduled Server Maintenance" error that Kevev reported in the guide thread on the development forum. Apparently, he was able to successfully flash, but I don't see any information there as to how he got around the error. I have tried repeatedly and always come up with the same result. Since I can't post yet in a development forum, I have to ask the question here. I must be doing something wrong, but I don't have a clue. I ask your indulgence, and would appreciate any help you can give me.
bearymore said:
I'm trying to root my phone using the Lelus method. As far as I know, I'm following the instructions to the letter. When I get to the actual flashing step, using the ICS T-mobile rom, I get the same "Scheduled Server Maintenance" error that Kevev reported in the guide thread on the development forum. Apparently, he was able to successfully flash, but I don't see any information there as to how he got around the error. I have tried repeatedly and always come up with the same result. Since I can't post yet in a development forum, I have to ask the question here. I must be doing something wrong, but I don't have a clue. I ask your indulgence, and would appreciate any help you can give me.
Click to expand...
Click to collapse
Do you have shttp in C:? C:/shttp/shttp.exe. It must be exatct this way. I have this problem too....
Rixx666 said:
Do you have shttp in C:? C:/shttp/shttp.exe. It must be exatct this way. I have this problem too....
Click to expand...
Click to collapse
I have it nested several directories deep. Did you get it to work when you put it in C? I'll give it a try.
bearymore said:
I have it nested several directories deep. Did you get it to work when you put it in C? I'll give it a try.
Click to expand...
Click to collapse
You get such hiccups if you dont follow the simple instruction first. Many people have habit to extract/save everything on desktop. C drive means C root location of C drive. And you must be logged in as "ADMINISTRATOR USER" on windows 7/8 to avoid access/permission issues.
cmahendra said:
You get such hiccups if you dont follow the simple instruction first. Many people have habit to extract/save everything on desktop. C drive means C root location of C drive. And you must be logged in as "ADMINISTRATOR USER" on windows 7/8 to avoid access/permission issues.
Click to expand...
Click to collapse
I'm used to Linux rather than Windows and when possible I put things in a user's home directory rather than the root directory. Since all that the instructions said was C drive, I interpreted that to mean anywhere on the C drive, not the root directory. Now that I put the program in the root directory, everything worked perfectly.
Thanks for your guide!
I just rooted my p769. I had a few hiccups.
Line 5a says optional, but really it's a necessary step if you've never done it once. If you've edited your HOSTS file and are running shttp, then it's not gonna be able to download/update what it needs to. Close shttp and rem out the lines in HOSTS until it updates, the continue as normal.
shttp has to be extracted in C:\
Mine ran from desktop but the 127.0.0.0:9002 test for the girls picture was file not found, look at shttp dialog window and you see it couldn't find the file because it wasn't where it expected it..
Also did you forget to right click and edit UpTestEX_mod2_marwin.exe compatibility tab if you're running win7/8 like it says to?
Once I set it all up according to the image in the thread and clicked "Normal web upgrade test" it gave me an error box. Saying to setup Tool > B2C Client Setup.
After that it was easy sailing. Well other than the fact that some of the KDZ/bin files were either missing, deleted or dropbox blocked the account for excessive use..