For the One X and White Evo Fans :) - Sprint HTC EVO 4G LTE

I've always wished that the One X could have come to Sprint instead of the Evo (blasphemy I know... ). The Sense 4.0 interface looks much better with the black buttons and white edging and back. And personally I think the white Evo looks like crap with the white faceplate on the front with the dark Sense UI. So I found this case on Amazon and now I have the best of both worlds The Android logos inlaid on the back give it a good soft touch feel and all the buttons are easy to get too.
White Androidified Cruzerlite TPU Case
http://www.amazon.com/dp/B0081244BK/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my EVO using Tapatalk 2

rubyknight said:
I've always wished that the One X could have come to Sprint instead of the Evo (blasphemy I know... ). The Sense 4.0 interface looks much better with the black buttons and white edging and back. And personally I think the white Evo looks like crap with the white faceplate on the front with the dark Sense UI. So I found this case on Amazon and now I have the best of both worlds The Android logos inlaid on the back give it a good soft touch feel and all the buttons are easy to get too.
White Androidified Cruzerlite TPU Case
http://www.amazon.com/dp/B0081244BK/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I have this case, and while I love it I only used it for 5 days. It gets stained very easily and nothing that I have found will restore it back to white. Tried manic eraser, alcohol, nail polish remover, bar-keepers friend, bleach.... So if you find something that works, please post it. I ended up breaking down and buying a different one on eBay last night.
Sent from my EVO using Tapatalk 2

I've got a green one, I can at least vouch for the quality. Everything about this case fits perfectly and tight.
The only issue I have is that some of my USB cable ends(Old BB Cables mainly) are a little thick for the cut out and they don't have a satisfying "Click" when you plug them in, this causes them to fall out relativly easily when you move the phone around while its connected.
My stock HTC cable, MonoPrice, and a few Sammy cables I have are perfect though.

Mine is still white after a week.. Not completely pure white but enough to keep me happy
Sent from my EVO using Tapatalk 2

Sprint had a white body glove case at the store. White with a bit of grey thrown on the sides as rubber grip. Not bad looking but makes the phone considerably larger.

I bought the black version of this case just a few minutes ago.
Also there's this other white one in eBay for less than 3 bucks.
I have an Otterbox commuter but..
I bought the black one though since it is just like the one I have for my Motorola Photon and I don't want to break or modify my otterbox just to be able to use the iBolt Car Dock..
These cases are very nice and durable and also the best is that they're cheap.
(It takes 2 weeks to be delivered cause they are sent from china) but shipping is free!
check it out!
http://www.ebay.com/itm/HTC-EVO-4G-...196907?pt=PDA_Accessories&hash=item2a20663a2b
In case any of you guys want the black one here is the link:
http://www.ebay.com/itm/HTC-EVO-4G-...969914?pt=PDA_Accessories&hash=item27c95beefa

I just bought the white one, too, two days ago. It shipped today!
Sent from my EVO using Tapatalk 2

Related

Verizonwireless.com High Gloss Silicon Case. What do you guys think?

Trying to get a head start on accessories before I get the phone, lol.
Does anyone own the High Gloss Silicon Case available direct from Verizon. It comes in 3 colors. $19.99 each.
They have a sale this weekend, buy 3 items get 20 percent off, buy 5 items get 30 percent off.
I was planning on getting the screen protectors directly from them also, and maybe an extra STANDARD size battery.
What do you guys think?
Here is the Verizon link:
http://www.verizonwireless.com/b2c/...ryDetails&archetypeId=12855&accessoryId=48049
oy that's expensive.
honestly, i'd just reccommend checking out cruzerlite tpu cases...go checkout my thread for pics, reviews and links to their stuff..they're much cheaper than 20 bucks..that's really expensive
SamsungVibrant said:
Trying to get a head start on accessories before I get the phone, lol.
Does anyone own the High Gloss Silicon Case available direct from Verizon. It comes in 3 colors. $19.99 each.
They have a sale this weekend, buy 3 items get 20 percent off, buy 5 items get 30 percent off.
I was planning on getting the screen protectors directly from them also, and maybe an extra STANDARD size battery.
What do you guys think?
Here is the Verizon link:
http://www.verizonwireless.com/b2c/...ryDetails&archetypeId=12855&accessoryId=48049
Click to expand...
Click to collapse
I coughed up the $20 for this case in black. I bought the phone just before traveling on business and did not want it naked. (I actually had just decided not to purchase another phone for a while as I had my Incredible rooted and on a stable ROM with a great kernel, etc. etc., but the LCD cracked. I suspect it was a Verizon OTA screen cracking exploit nobody knows about....)
I like how the case wraps around the Rezound. I also suprisingly like the gloss. We'll see how it holds up. I typically keep a case for a few months then decide I want something "else." Once a phone is rooted, I need to be able to pull the battery frequently while tinkering around with it, so a silicon case is a nice option, as opposed to a hard two-piece case that I'm constantly pulling apart. It feels like a "better" case than the cheaper silicon ones I can get at the stand at the mall right outside the Verizon store.
Picked up the red gloss case and so far so good I like that it doesn't add any bulk.
Sent from my Rezound using xda premium
I tried it on in stores and it looked pretty good but honestly theres not much of a difference from the ones found on ebay
I have this same case in black and love it. I just need a holster that this case can fit into.
Mr Bigs said:
I have this same case in black and love it. I just need a holster that this case can fit into.
Click to expand...
Click to collapse
the standard clamshell holster that verizon sells has always worked on the silicone cases on all the phones I have had.. bionic, charge, tbolt and razr; yes i may have a problem
I have the black one aswell. I liked it ok for a cheap case... I didn't like that the camera wasn't really protected... But that's really it tbh. Love my commuter otterbox
Sent from my ADR6425LVW using Tapatalk
I have the vzw one in red, got it with the phone... fits good, looks decent, not bulky. I like it.
Yep, I have the black high gloss case also. With the case on, the Rezound fits perfectly in my hand and the case adds a nice grip to avoid dropping
Sent via my HTC Rezound using XDA premium app.
Grabbed the black one when I picked up the phone. Fairly nice but not worth 20 bucks imo. Once my Otterbox commuter comes in, it's going back and I'll pick up a car charger.
I picked this up from Verizon about a week ago and I love it it protects my phone and it provides a good grip and with my discount I only paid $15
Sent from my HTC Rezound 4G Debloated
Wobblin30 said:
Grabbed the black one when I picked up the phone. Fairly nice but not worth 20 bucks imo. Once my Otterbox commuter comes in, it's going back and I'll pick up a car charger.
Click to expand...
Click to collapse
not a bad idea. I wish I would have thought about that. I guess ill keep it just in case
Sent from my ADR6425LVW using Tapatalk
Window Mount
Does anyone know if the phone fits into the verizon window mount while using this case?
I got sick of taking my OG Droid case off everytime I get in the car, so I left it off... of course that was the day I dropped it.
Xsoldier2000 said:
Does anyone know if the phone fits into the verizon window mount while using this case?.
Click to expand...
Click to collapse
I just talked to the sales rep, and it does.
Now I'm just wondering if the otterbox fits in the car mount....
you mean this one?
Sent from my ADR6425LVW using Tapatalk
This one
^^Yes sir... I actually went out and got it... had a verizonwirelss gift card plus my employee discount ...
Fits nice and has a good grip...plus still easy to slide out of a pocket. (and I don't have to remove it to put it in the charger.)
that's cool but... no pink one?
and do they have them for the extended battery to?...
Xsoldier2000 said:
^^Yes sir... I actually went out and got it... had a verizonwirelss gift card plus my employee discount ...
Fits nice and has a good grip...plus still easy to slide out of a pocket. (and I don't have to remove it to put it in the charger.)
Click to expand...
Click to collapse
i returned mine it sucks
Sent from my ADR6425LVW using Tapatalk
voxigenboy said:
that's cool but... no pink one?
and do they have them for the extended battery to?...
Click to expand...
Click to collapse
This place has cases for extended batteries:
http://shop.htcpedia.com/htc-rezound-extended-battery-tpu-case-hard-rubber.html

Just ordered 2 new cases, and a pouch. Will review when received

After finding out about Brando screen protectors after reading a thread here on XDA, I decided to see what other accessories they had for the 7.7. And they had a couple cases in different colors that looked worth a try. Ive been wanting one that snapped on and only covered the edges and not any of the screen itself because sometimes they will cause a screen protector to peel, and I found this. It comes in 4 colors. I ordered the "ice" color which is basically clear because I wanted to still be able to see the silver back. And since it was only $10 I decided to pick up this one too, also in the ICE color. So anyway Ill write some short reviews about them when I get them. It takes 7-10 days from Hong Kong. Heres a couple pics also.
Just ordered 2, these look awesome! Thanks for posting, I'll post pics when I get them.
Sent from my GT-P6800 using XDA
xangelkiller said:
Just ordered 2, these look awesome! Thanks for posting, I'll post pics when I get them.
Sent from my GT-P6800 using XDA
Click to expand...
Click to collapse
Cool, what colors did you get?
Gam3r 4 Life said:
Cool, what colors did you get?
Click to expand...
Click to collapse
The blue and the black. if I like them I will get the other colors too!
Sent from my GT-P6800 using XDA
I got a similar one, with an X in the back. It works, but it increases the size a bit (not so much thickness though, but the length x height), without adding much value (like a stand or wallet pockets or whatever). And it's kind of slippery in your hands, but not so much in your pocket.
It does protect the tab more than the OEM book case, but the Book Case looks better, it's more portable, it's a stand and slips into your pocket easier, while not being slipery in your hands when folded. Protection is just against scratches though.
The worst thing about the case like this is the power button. It's kind of hard to press on/off and sometimes I turn off the tablet trying...very annoying.
RipplingHurst said:
I got a similar one, with an X in the back. It works, but it increases the size a bit (not so much thickness though, but the length x height), without adding much value (like a stand or wallet pockets or whatever). And it's kind of slippery in your hands, but not so much in your pocket.
It does protect the tab more than the OEM book case, but the Book Case looks better, it's more portable, it's a stand and slips into your pocket easier, while not being slipery in your hands when folded. Protection is just against scratches though.
The worst thing about the case like this is the power button. It's kind of hard to press on/off and sometimes I turn off the tablet trying...very annoying.
Click to expand...
Click to collapse
Yea, I will most likely be using the snap on most of the time.
UPDATE: Ive received the cases and will write a short review with pics.
Ill start with the snap on case. First thing I noticed that there were 2 spots that had what I would call a stress mark. You know the whitish look that plastic gets when its been bent and is close to breaking? (see pics) This was right out of the package. And it had a scratch along the back as well. Very cheaply made. But it does fit, and fits pretty good. But compared to the TPU type it just doesnt look good, so that one will be shelved. No point in returning it. Comes in Blue, Pink, Black, and ice (clear) I dont recommend this case.
The "ice" colored clear TPU style "X" case is awesome. Its made very well and fits perfect. Since its clear the silver of the tab shows through and looks great. All the ports are cut out well, and it has a very nice grip feel to it. Which of course is a great thing to have on a nearly $600 tablet. My only complaint is one that happens with most of these style cases, and that is that it makes the buttons stiff, and less responsive. They work, but require a lot more force to register. Other than that if you want a case that protects, and still shows the awesome silver back of the 7.7, I do recommend this case, and I prefer the ice colored one. (clear) It does come in red also.
I had also ordered this sleeve . I knew there was a chance it might not fit, but based on the measurements I knew it would be close. Well it didnt fit. It was only $7.45 shipped so no biggie. Ill give it to my mother in law that has the first edition 7" galaxy tab.
I just checked their site (brando), and they have a new case choice that looks like it might be good. Its a snap on type, but is rubber backed rather than the hard plastic. Comes in Colors: Black, White, Blue, Pink, and Red. I might order one, but I learned from my last order to expect at least 16 days for shipping.
Anyway thats all and heres some pics.
Now that you have had the clear back cover for a few days, how is it holding up specially around the buttons and sim/SD slot? I ordered a similar one from an eBay seller in china and it has fallen apart those two areas. This was within 2 day of first use, I had not dropped it so was very upset about it. I did pay $4 for it so i guess I shouldn't complain.
Using Galaxy Tab 7.7 P6800
adinis78 said:
Now that you have had the clear back cover for a few days, how is it holding up specially around the buttons and sim/SD slot? I ordered a similar one from an eBay seller in china and it has fallen apart those two areas. This was within 2 day of first use, I had not dropped it so was very upset about it. I did pay $4 for it so i guess I shouldn't complain.
Using Galaxy Tab 7.7 P6800
Click to expand...
Click to collapse
I dont even use it. Already collecting dust. I use the X case sometimes, but love the poetic case and use it the most. Looks great, protects great, and has multi stand angles. Highly recommend.

TPU case

has anyone else bought the TPU case at a verizon store
it fits really well.
didnt think id ever want it, but it feels nice, and was cheap only $20
andybones said:
has anyone else bought the TPU case at a verizon store
it fits really well.
didnt think id ever want it, but it feels nice, and was cheap only $20
Click to expand...
Click to collapse
my cheap case from amazon finally came yesterday, and im pretty happy with it
http://www.amazon.com/gp/product/B008CQW7QO/ref=oh_details_o00_s00_i00
5 bucks, shipped and it fits really well
unfortunately i was impatient waiting for it to get here yesterday, and spent $20 bucks on one of those awful silicone cases at a vzw 3rd party, since NO STORE IN MY AREA HAD ANYTHING ELSE!!!!
all 3 vzw corps, 2 3rd parties, bb, sams club, and pc richard had nothing left by monday/tuesday
apparently my main vzw corp had a ton of stuff last weekend, but according to them they "sold a lot of this phone on friday/saturday, and people bought up all the accessories", and the other close vzw corp only had red and pink tpu cases
supposedly bb was getting stuff early next week, but now im happy with the cheap amazon one
might get an otterbox when they show up, but only if adb during boot is fixed first (probably permissions issue) cuz otterbox doesnt equal easy batt pull
I bought it. I've always liked TPU cases, and this one is slim and fits well.
Sent from my ADR6410LVW using xda app-developers app
I purchased it as well. It's nice, but my only complaint is that unlike the TPU case for the OG DInc, the volume and power buttons aren't covered by the case. Other than that, it's great.
dbrits said:
I purchased it as well. It's nice, but my only complaint is that unlike the TPU case for the OG DInc, the volume and power buttons aren't covered by the case. Other than that, it's great.
Click to expand...
Click to collapse
I'm just the opposite. I prefer the cut out sections. I always cut those sections out on the old versions
i like the volume cut outs but the power is a pain but for me it isn't an issue, as I use wake on vol on every phone/ROM I use, and I also use a widget to put my phone to sleep, so unless I'm powering off the phone I don't touch the power button
I have the red one... It looks and feels great... And ordered 4 different color S style cases as well on amazon.. can't wait for those
Sent from my ADR6410LVW using Tapatalk 2
I'm still looking for a case becuase I don't see that many cases. Not that many major companies release cases for this phone I might wait for a while, and I might get diztronic one if I don't see any more.
My only complaint with the TPU is that the power button is very hard to push, but I use a widget to turn the screen off and the volume buttons to turn on, so it works for me personally.
TBH though, I only use the case when out n about drinking or something.
90% it's off
the feel of this phone stock is very nice.
no overheting that I've experiened with the Rezound.
also this is quite thin, compared to Rezound.
batt life is decent as well
my friend got a tpu case from Amazon and complained about the power button being difficult to press. I suggested using thin strips of tape on the inside of the case under the power button to reduce the gap between button and case. She did that and now the button works perfectly.
Sent from my Incredible 2 using Tapatalk 2
andybones said:
My only complaint with the TPU is that the power button is very hard to push, but I use a widget to turn the screen off and the volume buttons to turn on, so it works for me personally.
TBH though, I only use the case when out n about drinking or something.
90% it's off
the feel of this phone stock is very nice.
no overheting that I've experiened with the Rezound.
also this is quite thin, compared to Rezound.
batt life is decent as well
Click to expand...
Click to collapse
The Verizon TPU has the cut out for the power button... Very great quality rpu as well
Sent from my ADR6410LVW using Tapatalk 2
nitsuj17 said:
my cheap case from amazon finally came yesterday, and im pretty happy with it
http://www.amazon.com/gp/product/B008CQW7QO/ref=oh_details_o00_s00_i00
5 bucks, shipped and it fits really well
...snip...
im happy with the cheap amazon one
Click to expand...
Click to collapse
Based on your glowing review, I bought this cheap one, too. It just arrived today, and in the few hours its been on the phone, I like it much better than my original snap-together clear plastic case. Using the power button through the case is taking a little getting used to. I will likely try the wake on volume mod ...when we get root...
junkmail9 said:
Based on your glowing review, I bought this cheap one, too. It just arrived today, and in the few hours its been on the phone, I like it much better than my original snap-together clear plastic case. Using the power button through the case is taking a little getting used to. I will likely try the wake on volume mod ...when we get root...
Click to expand...
Click to collapse
right it's too bad i can't hook u up with wake on vol, i dont use power button every, vol button to turn on, and widget to turn off
the community s-off beta test phone *should* arrive today, if not should be tmw since it's usps.
then the work begins, and hopefully everyone has s-off screw htcdev unlock!
I ordered the "Diztronic Matte Back Translucent Black Flexible TPU Case for HTC Droid Incredible 4G LTE (Verizon) **For New 2012 4G LTE Model Only (ADR6410)** [Diztronic Retail Packaging]" case from Amazon and it fits very well! I previously had the black / clear S-type TPU case on my DINC 2 and it separated where the black and clear parts connect after a few months.
I also got the "GreatShield Ultra Anti-Glare (Matte) Clear Screen Protector Film for HTC DROID Incredible 4G LTE (3 Pack)". I'm addicted to the matte finish screen protectors. Not only do they eliminate the glare but it makes swiping so much easier (especially here in humid Florida).
Sent from my ADR6410LVW using xda app-developers app
sleepit said:
I ordered the "Diztronic Matte Back Translucent Black Flexible TPU Case for HTC Droid Incredible 4G LTE (Verizon) **For New 2012 4G LTE Model Only (ADR6410)** [Diztronic Retail Packaging]" case from Amazon and it fits very well! I previously had the black / clear S-type TPU case on my DINC 2 and it separated where the black and clear parts connect after a few months.
I also got the "GreatShield Ultra Anti-Glare (Matte) Clear Screen Protector Film for HTC DROID Incredible 4G LTE (3 Pack)". I'm addicted to the matte finish screen protectors. Not only do they eliminate the glare but it makes swiping so much easier (especially here in humid Florida).
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
How transparent/clear and fingerprint/smear resistant is the GreatShield Ultra Anti-Glare (Matte) Clear Screen Protector? I have a "crystal clear" screen protector It is nice and transparent, but it is horrible with fingerprints.
Regarding the TPU case I bought, my only complaint is that the front sides don't come up high enough to protect the glass when setting the phone face down on a table. Otherwise it's great.
Sent from my Kindle Fire using Xparent Blue Tapatalk 2
Ill post pics of the stock one I got from Veriozn, cna u guys pis t some shots as well/
junkmail9 said:
How transparent/clear and fingerprint/smear resistant is the GreatShield Ultra Anti-Glare (Matte) Clear Screen Protector? I have a "crystal clear" screen protector It is nice and transparent, but it is horrible with fingerprints.
Regarding the TPU case I bought, my only complaint is that the front sides don't come up high enough to protect the glass when setting the phone face down on a table. Otherwise it's great.
Sent from my Kindle Fire using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
That's a huge advantage of the matte protectors which I left out...no fingerprints! I hardly ever have to wipe the screen off unlike before with no or a clear protector on.
Sent from my ADR6410LVW using xda app-developers app
Case / Screen Protector Images
Here my phone with the following accessories -
http://www.amazon.com/gp/product/B00873YO22/ref=oh_details_o02_s00_i00
http://www.amazon.com/gp/product/B008927VE4/ref=oh_details_o02_s00_i02
The lip on the case definitely keeps the screen from touching the surface when laying it face-down.
sleepit said:
Here my phone with the following accessories -
http://www.amazon.com/gp/product/B00873YO22/ref=oh_details_o02_s00_i00
http://www.amazon.com/gp/product/B008927VE4/ref=oh_details_o02_s00_i02
The lip on the case definitely keeps the screen from touching the surface when laying it face-down.
Click to expand...
Click to collapse
Does that case add considerable bulk? That's the only thing that has kept me from ever casing a phone.
Sent from my HTC Incredible 4G
Pandalero said:
Does that case add considerable bulk? That's the only thing that has kept me from ever casing a phone.
Sent from my HTC Incredible 4G
Click to expand...
Click to collapse
No, the case is very slim...I'm still trying to get used to how narrow this phone is compared to the DINC 2. I have a nasty habit of dropping my phone so I can't live without a case.
Sent from my ADR6410LVW using xda app-developers app

Evo lte car mount?

I'm in the market for a car mount for my evo, just wondering if there's any mounts available that will hold it with a case on?
Sent from my Black "Destroy Mode" Nexus 7
I have the one from sprint and it works fine with my case. Just leave out the spacer from the dock. I think it was $35 or so in store.
G
dr-gonzo said:
I have the one from sprint and it works fine with my case. Just leave out the spacer from the dock. I think it was $35 or so in store.
G
Click to expand...
Click to collapse
second this, as long as its not a bulky otterbox. TPU silicone and hard cases should work fine. They also supply little pieces of foam so if your phone is at an angle, you can straighten it out. You'll see what i mean if you get one.
cheers
For a cheaper dock the quality is surprisingly good, got mine with the media link back when they had the 2 for 20% off, all in all only paid about a hundred bucks, dock was practically free lol
I need one that will fit an evo with a ballistic case on
Sent from my Rooted, LazyPanda, White "Destroy Mode" Evo
3vo kid said:
I need one that will fit an evo with a ballistic case on
Sent from my Rooted, LazyPanda, White "Destroy Mode" Evo
Click to expand...
Click to collapse
Which Ballistic case? the SG or the heavier duty one?
scottborasjr said:
Which Ballistic case? the SG or the heavier duty one?
Click to expand...
Click to collapse
I've got both of em lol.
Sent from my Rooted, LazyPanda, White "Destroy Mode" Evo
Amazon has a good one called iOttie
http://www.amazon.com/iOttie-Windshield-INCREDIBLE-BlackBerry-Revolution/dp/B00687N0GK
holds any phone, so it came in handy for me. also they have excellent customer support. mine broke when my daughter knocked it off the counter with my phone in it and they sent me a replacement for free
I think the one that Sprint sells is the closest you'll get to OEM from HTC. Unfortunately, I've ONLY been able to find it in stores and on Sprint's website. Finding it on any other website or eBay is pretty much impossible to find a better price. I like keeping everything OEM, so I'll probably get it when I'm really going to need it.
the one sold by sprint is made from a company called ibolt. They make a generic car dock for the oneX that fits the LTE and the oneX.
http://www.amazon.com/iBolt-Vehicle...?ie=UTF8&qid=1347487055&sr=8-3&keywords=ibolt
that is the one that i'm using right now. works great and its the same price at sprint. i just bought it off of amazon because i had a $50 Amazon gift card so i basically got it for free.
-Ed
This ARkon mount its the note, it'll fit the Evo with a Ballistic case:
http://www.arkon.com/slimgrip/slimgrip-dashboard-mount-sm578.html
They have window suction and other ones of you don't want the dash version. Best of all, they're mostly under $20.
I ordered an iBolt from Amazon and you can (optional) use it with or without case. All you have to do is remove a piece of plastic from the mount and it fits with case. Its a very sturdy and flexible mount and I recommended it. I think I paid around $25-30. There are cheaper ones out there but you get what you paid for...
Sent from my EVO using Tapatalk 2
I took a trip to the local Sprint store this morning and picked up their car dock and I must say, Im damn impressed at the quality! kind of whack that it doesnt include a charge cable but it is a nice piece for sure. I hightly recommend it :good:
I just got the iBolt version from thecellguru.com & love it so far. $27 after shipping (no tax for those in states that care). Cheapest I was able to find anywhere online (even eBay). They only have it under the OneX compatibility section (probably because that's what it says on the box), but I can attest that it works fine with the EvoLTE. Oh, and no I do not work for them...just dropping a tip to save everyone some $ on a decent accessory.
http://www.thecellguru.com/Products/72512
I'm going to look into the ibolt, I like the design. Does anyone have pictures of their evo in it that they could share?
Sent from my Rooted, LazyPanda, White "Destroy Mode" Evo
I have a universal mount from wally world, it works perfectly it doesn't have a charger but I use my rocketfish charger that was for my idiot phone 4 I can even use the mount with my defender so its a good buy in.my eyes
Sent from my LTEVO
I've been looking at the ibolt. Has anyone used it with an otterbox commuter case? The reviews and description say it can be used with a case, but otterbox has a flap covering the usb port so I don't know how it would work.
I wish they would make one like I had for the og evo. With the cone shaped base and the thin chrome post with ball on each end, and thin minimal plastic clip holding the phone. All so neat and trim. I hate the big boat shape tray on the sprint/ibolt one, especially since my phone has no case, that boat shape is way bigger than the phone and looks ugly. Also the big fat hold-down clip on the top. Ugh.. it all blocks so much more window view than necessary. And of course the blue charging light, yet another unnecessary light on my dash at night.
But it holds the phone securely, charges, and provides a good landscape gps and media player.
I'll have to dig up a pic of my old og evo setup to show what I mean. I think the dock was actually for the hero but it worked on the og evo with a tiny hack just trimming away a small bit of plastic. Looked a hundred times better than the sprint/ibolt. This was definitely one downgrade from upgrading from og evo to evo lte.
Sent from my EVO using xda premium
Oh yeah plus you could turn it portrait or landscape any time and it looked good both ways.
I wish they would make THIS for the evo lte.
Sent from my EVO using xda premium
They do. It's from iBolt. It's available on Sprints site. Its 35 bucks, even on eBay ... But sure is nice
Sent from my EVO using Tapatalk 2

Trident Aegis

So I don't usually make threads but this case seriously is awesome. I also had one when I had my HTC inspire. I would say it gives about as much protection as an otterbox commuter. It also comes in multiple colors (I love the red color of this case) and comes with one screen protector for the i777 and one for the gt I9100. It costs 35 bucks and the only cons to this case is that I can't fit my 3rd party usb charger in because the head of it is too big. That, and it seems like the red part of the case likes to rub off, but that might just be my particular unit and doesn't necessarily mean that it will happen to all of them.
Here's a link for you guys:
http://www.tridentcase.com/shop-products/aegis-case-samsung-galaxy-s-ii-gt-i9100-sgh-i777.aspx
Sent from Team Pirate! Using Tapatalk 2
Oh, this one. Looks pretty nice! Thanks for sharing, might grab one of those! If i don't get the battery included one thats it.
I like how its 2 parts and it comes with a screen protector. Iam sold.
I've had this forever today I dropped my phone on my bike car ran it over and case took full force cracking the plastic around it but my phone was good time to order a new one
Sent from my SGH-I777 using Tapatalk 2

Categories

Resources