Im having diffculty unlocking the bootloader of my SXP using the official method. When I am asked to ''push and hold the unlock button* at the same time as you connect the phone to the computer with a USB-cable'' the phone just turns on and starts charging. My pc doesnt recognise it either. I have tried using the volume up and down button ands even the menu button (the Neo uses the menu) but to no succcess. Is there a way around this?
Thanks
from flashmode wolume down
from fastbootmode wolume up
and you have to disable usb debugging
Related
Hello, I tried to unlock the bootloader but I need to go into flash mode. I follow the instructions and the cell show icon charging but the pc does not recognize. I tried on different computers. What is the problem?
My cellphone is a Xperia Mini Pro U20i
Thanks you
Flashmode - Turn off phone, hold down Volume DOWN button, connect USB cable,
green LED lights up, release the button.
Fastboot - Turn off phone, hold down Volume UP button, connect USB cable, blue LED lights up, release the button.
Which method are you unlocking? I think SE official method required fastboot mode.
Someguyfromhell said:
Flashmode - Turn off phone, hold down Volume DOWN button, connect USB cable,
green LED lights up, release the button.
Fastboot - Turn off phone, hold down Volume UP button, connect USB cable, blue LED lights up, release the button.
Which method are you unlocking? I think SE official method required fastboot mode.
Click to expand...
Click to collapse
yeah official method requires fastboot mode.
Someguyfromhell said:
Flashmode - Turn off phone, hold down Volume DOWN button, connect USB cable,
green LED lights up, release the button.
Fastboot - Turn off phone, hold down Volume UP button, connect USB cable, blue LED lights up, release the button.
Which method are you unlocking? I think SE official method required fastboot mode.
Click to expand...
Click to collapse
I have tried it with the button "Back" :S
JorgexOne said:
I have tried it with the button "Back" :S
Click to expand...
Click to collapse
"Back" buttons were for the X10 Mini's, the volume rockers are for the new 2011 Mini Pro SK17i
Volume Rocker Up - Fastboot
Volume Rocker Down - Flashmode
If your unlocking through SE official website, use Fastboot (Volume Rocker Up)
BudgyN1 said:
"Back" buttons were for the X10 Mini's, the volume rockers are for the new 2011 Mini Pro SK17i
Volume Rocker Up - Fastboot
Volume Rocker Down - Flashmode
If your unlocking through SE official website, use Fastboot (Volume Rocker Up)
Click to expand...
Click to collapse
I have Xperia Mini Pro u20i :S
help how to unlock bl of neo l in simple way x.x
i cant enter fastboot by pressing and hold menu then connect to pc -.-
led wont turn blue help me
solved : search button - fastboot xD
Turn off ur device
Hold search button on ur mobile and connect to pc
Hey guys,
Iv got a stock US tablet Z, SGP311 on 10.4.1.b.0.109
Iv tried holding power and volume + while booting to get into stock recovery, iv tried tapping Vol+ a few times while booting, iv tried holdin Vol+ for 3 seconds and then hitting power......i cant get this damn thing into recovery!
Can someone help??
Snazarian said:
Hey guys,
Iv got a stock US tablet Z, SGP311 on 10.4.1.b.0.109
Iv tried holding power and volume + while booting to get into stock recovery, iv tried tapping Vol+ a few times while booting, iv tried holdin Vol+ for 3 seconds and then hitting power......i cant get this damn thing into recovery!
Can someone help??
Click to expand...
Click to collapse
There is no Recovery Mode in the XTZ's stock firmware. Here is how to access the available functions of the stock firmware.
1. Power On
Press and hold the POWER button until notification light flashes once, then release POWER button.
2. Power Off
Press and hold the POWER button until menu appears, then select "Power off" and "OK".
3. Restart
Restart device to turn off all running applications and to free up memory.
3.1. Simultaneously press and hold the VOLUME UP and POWER buttons for 10 seconds.
3.2. After the notification light flashes three times, release the buttons.
3.3. The device will power off automatically.
3.4. After the device is powered off, power on the device.
4. Reset
Reset device to its original settings to free up memory.
Don't forget to back up any important data saved on the device!
4.1. Go to Settings > Backup & reset > Factory data reset > Reset tablet.
5. Enable Safe Mode
5.1. Power off the device.
5.2. Press and hold the POWER button until the notification light flashes once.
5.3. Wait until the Xperia™ logotype disappears.
5.4. Press and hold the VOLUME DOWN button.
5.5. The device will restart in Safe Mode.
5.6. To exit Safe Mode, restart the device.
6. Flash Mode
6.1. Power off the device.
6.2. Connect a USB cable to the device.
6.3. Press and hold the VOLUME DOWN button.
6.4. Connect the USB cable to a computer.
6.5. Wait until the notification light flashes red-green once, then release VOLUME DOWN button.
6.6. To exit Flash Mode, disconnect the USB cable.
7. Fastboot Mode.
7.1. Power off the device.
7.2. Connect a USB cable to the device.
7.3. Press and hold the VOLUME UP button.
7.4. Connect the USB cable to a computer.
7.5. Wait until the notification light flashes red then solid blue, then release VOLUME UP button.
7.6. To exit Fastboot Mode, disconnect the USB cable.
8. Service Menu
8.1. Start the Contacts app.
8.2. Go into Settings.
8.3. Touch the blank area at middle bottom of screen for at least five seconds then stop touching screen.
8.4. "Enter service mode" button will be displayed.
8.5. Press the "Enter service mode" button.
8.6. Enter *#*#7378423#*#* (*#*#SERVICE#*#*).
8.7. Service menu will be displayed.
8.Notes.1. Enter *#*#4636#*#* (*#*#INFO#*#*) to display testing information.
8.Notes.2. Enter *#*#73556673#*#* (*#*#SELLMORE#*#*) to toggle Demo Mode activation on/off. WARNING! Activating Demo Mode will delete all personal content (photos, etc.) and settings.
How do you flash CM then ?
Cat McGowan said:
There is no Recovery Mode in the XTZ's stock firmware.
Click to expand...
Click to collapse
Thanks for telling ! I had been looking for this information for a long time.
Apparently, my service info says "bootloader unlock allowed: yes", I wonder if it means that I actually unlocked it or that the device would accept me to do it.
I moreover wonder how one can manage to install CM or root its device without using Recovery Mode. I saw on your signature you rooted your device. May I ask how you did that ?
ducasse.isidore said:
Thanks for telling ! I had been looking for this information for a long time.
Apparently, my service info says "bootloader unlock allowed: yes", I wonder if it means that I actually unlocked it or that the device would accept me to do it.
I moreover wonder how one can manage to install CM or root its device without using Recovery Mode. I saw on your signature you rooted your device. May I ask how you did that ?
Click to expand...
Click to collapse
It means your bootloader CAN BE unlocked.
To install a ROM, such as CM, you first unlock your bootloader, then move the ROM zip to your device. After that, you flash the included kernel from the zip with fastboot. Then, you boot into the included recovery from the kernel and flash the whole ROM.
Sent from my LT26i using Tapatalk
Felimenta97 said:
It means your bootloader CAN BE unlocked.
To install a ROM, such as CM, you first unlock your bootloader, then move the ROM zip to your device. After that, you flash the included kernel from the zip with fastboot. Then, you boot into the included recovery from the kernel and flash the whole ROM.
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
I finally found a solution to my problem : I unlocked the device using flashtool-0.9.11's gui procedure, instead of flashtool's fastboot. It succeeded and I can successfully flash anything I want on the device.
I found your rational approach to my problem useful. It helped me isolate a solution. Thanks !
Hi there
I know this is an old thread. But my problem is same. I got this devide called sony experia tablet z lte ntt docomo x variant
My problem is that it got a lock screen and i have forgot the password. So i want to reset it.
But the problem is how do i do that, there isnt a recovery on this thing.
I was playing around with the buttons and i dont know how ,or which combination i pressed the tab booted to a factory reset screen but i wanst sure to reset that time so i exited from that and tablets lock screen appeared.
And now i cant figure out that how to do this again. Please help me
......
Hi there
I know this is an old thread. But my problem is same. I got this devide called sony experia tablet z lte ntt docomo x variant
My problem is that it got a lock screen and i have forgot the password. So i want to reset it.
But the problem is how do i do that, there isnt a recovery on this thing.
I was playing around with the buttons and i dont know how ,or which combination i pressed the tab booted to a factory reset screen but i wanst sure to reset that time so i exited from that and tablets lock screen appeared.
And now i cant figure out that how to do this again. Please help me
......
Press and hold the Power and Volume Down keys for 10 seconds.
The device will reset and restart.
I can't boot on "Fastboot mode (E2303 - unlocked bootloader - firmware 26.3.a.1.33)
Hi! I've a M4 Aqua single (E2303) with unlocked bootloader and firmware 26.3.A.1.33. I've tried to boot into fastboot mode, doing this:
1 - Turn off power off by pressing Power key
2 - Press and hold Volume Down key
3 - Connect the Xperia to USB Cable
4 - Done!
But nothing happens... I'm doing something wrong or I miss anything?
Thanks in advance!
JBerto said:
Hi! I've a M4 Aqua single (E2303) with unlocked bootloader and firmware 26.3.A.1.33. I've tried to boot into fastboot mode, doing this:
1 - Turn off power off by pressing Power key
2 - Press and hold Volume Down key
3 - Connect the Xperia to USB Cable
4 - Done!
But nothing happens... I'm doing something wrong or I miss anything?
Thanks in advance!
Click to expand...
Click to collapse
Fastboot mode need to press and hold Volume + (UP) Befor Connect to PC.
EHSAN� said:
Fastboot mode need to press and hold Volume + (UP) Befor Connect to PC.
Click to expand...
Click to collapse
Thanks for try to help! Anyway, I've just try that, the led turn blue... but nothing happens either...
Make sure you hold it while you connect it? Other than that I dont know.... Maybe enable USB debugging?
Flashmode: Vol Down
Fastboot: Vol Up
Beware, the phone will go out of fastboot mode after about 15 seconds if no computer activity takes place.
William1020000 said:
Make sure you hold it while you connect it? Other than that I dont know.... Maybe enable USB debugging?
Flashmode: Vol Down
Fastboot: Vol Up
Beware, the phone will go out of fastboot mode after about 15 seconds if no computer activity takes place.
Click to expand...
Click to collapse
Yes, I've done everything (USB debugging enabled too, hold Vol+ more than 20secs...)
And after that "blue led" I've try this:
http://forum.xda-developers.com/m4-aqua/general/root-sony-xperia-m4-aqua-e2303-firmware-t3485006
But as I said, with no luck at all...
I don't know why it dosn't work...
If you have the blue LED, that means the phone is in fastboot mode.
If your computer can't pick it up, that is usually a driver issue. Try installing drivers from the flashtool. Be aware, that you need to enable unsigned driver installation in Windows before you can do that.
Hello there,
I got a Xperia Z3 and forgot the lock pattern. I tried several things which all didn't work:
- Tried booting into bootloader by pressing power+vol down+vol up = vibrated a few times and turned off
- Re-flashing using Flashtool = drivers needed, can't find them
- calling codes for reset etc. from emergency
- Xperia Companion software repair - needs to be unlocked for that.
Don't have USB Debugging or OEM unlock enabled. Not registered at My Xperia
Iqor P.
thecrazyromboiii said:
Hello there,
I got a Xperia Z3 and forgot the lock pattern. I tried several things which all didn't work:
- Tried booting into bootloader by pressing power+vol down+vol up = vibrated a few times and turned off
- Re-flashing using Flashtool = drivers needed, can't find them
- calling codes for reset etc. from emergency
- Xperia Companion software repair - needs to be unlocked for that.
Don't have USB Debugging or OEM unlock enabled. Not registered at My Xperia
Iqor P.
Click to expand...
Click to collapse
Retry the bootloader method by pressing only power+volume down for about 20 sec (until you reboot into bootloader) .
From there reset data and reboot.
What you were doing wrong is to press volume up and down with power button
RaiZProduction said:
Retry the bootloader method by pressing only power+volume down for about 20 sec (until you reboot into bootloader) .
From there reset data and reboot.
What you were doing wrong is to press volume up and down with power button
Click to expand...
Click to collapse
already did that, it just boots up normally.