Hi everyone!
thanks for the fast response,
i tried to upgrade my rom to cyanogen cm9 from 7,
it got stuck in boot loop,
also - i lost cwm,
i can enter download mode, but no matter what kernel\rom (i even used stock)
it gets stuck in boot (in some roms it went to the rom opening screen - and then it gets stuck,
i tried flashing different kernels - nothing.
is there anyway to get clock work back at least? i tried flashing it trough odin 4 times already - says ok,
but doesnt appear when i start the phone.
i promise ill be a good boy, help me out here please
Try flashing cm9 resurrection Odin method and see if it works
Sent from my GT-I9100 using Tapatalk 2
drivenbythemadness said:
hi everyone!
Thanks for the fast response,
i tried to upgrade my rom to cyanogen cm9 from 7,
it got stuck in boot loop,
also - i lost cwm,
i can enter download mode, but no matter what kernel\rom (i even used stock)
it gets stuck in boot (in some roms it went to the rom opening screen - and then it gets stuck,
i tried flashing different kernels - nothing.
Is there anyway to get clock work back at least? I tried flashing it trough odin 4 times already - says ok,
but doesnt appear when i start the phone.
I promise ill be a good boy, help me out here please
Click to expand...
Click to collapse
did tou try to wipe data: Factory reset ?
Can't get there, phone will only enter download mode or boot loop,
i keep messing with it in the meanwhile,
now the drivers for the device are gone, odin won't see the phone,
talk about a string of mistakes :/
Is there anyway you can walk me trough it? its a moment of your time, and at least a few months of work if i have to buy a new one...
drivenbythemadness said:
Can't get there, phone will only enter download mode or boot loop,
i keep messing with it in the meanwhile,
now the drivers for the device are gone, odin won't see the phone,
talk about a string of mistakes :/
Is there anyway you can walk me trough it? its a moment of your time, and at least a few months of work if i have to buy a new one...
Click to expand...
Click to collapse
Re-install Kies
Reboot
Connect phone (in download mode)
Flash Siyah kernel via odin
Boot into recovery
full factory wipe
enable mass storage
transfer then flash rom.
ronhoover88 said:
Try flashing cm9 resurrection Odin method and see if it works
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
well, i gotta figure out how to make odin see the phone now, i messed it up too :/
TheATHEiST said:
Re-install Kies
Reboot
Connect phone (in download mode)
Flash Siyah kernel via odin
Boot into recovery
full factory wipe
enable mass storage
transfer then flash rom.
Click to expand...
Click to collapse
i managed to get the drivers working, Odin fails to flash with siyah :
> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Kept trying, No change. can anyone help me out on this one? i really don't think my provider will fix it...
drivenbythemadness said:
i managed to get the drivers working, Odin fails to flash with siyah :
> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Kept trying, No change. can anyone help me out on this one? i really don't think my provider will fix it...
Click to expand...
Click to collapse
Well... since odin is working now, why dont u flash the resurrection edition?
Sent from my GT-I9100 using xda app-developers app
can flash anything, i believe its "Kernel corruption" or something like that, i found a guide that helped me, had to flash the bootloader and everything,
thanks alot for the help guys,
for future reference i will post the link to the guide :
http://forum.xda-developers.com/showthread.php?t=1457458
Thanks alot guys, its the best feeling knowing there is someone trying to help even if its a stupid error from my side.
Good to know everything's good and running. Perhaps you can copy and paste the link in the OP and edit the title to [issue solved] for future similar issues.
Sent from my GT-I9100 using xda app-developers app
Related
I have searched a lot of threads and post about bricks before posting here. It would appear that my problem is a unique combination of a lot issues.
Detailed Explanation :
I am using a Samsung Galaxy S II (GT-I9001) with the Omega Custom ROM
[ROM][XXLPH][05Mar]◄Omega ICS v3.2►.
http://forum.xda-developers.com/showthread.php?t=1489197
It was working perfectly fine for a week.
Then suddenly is stopped responding and on reboot , it just showed the Samsung start screen with the yellow triangle and exclamation.
I entered Recovery Mode and tried to restore a backup but it failed. I also tried to install the same ROM again (install from SD card) with CWM from recovery but it stopped halfway and failed to respond for over 2 hours.
With no choice but to pull the battery I did so but now Recovery Mode has stopped working. Just get the same loading screen with Samsung and yellow triangle.
However I was not worried because DOWNLOAD mode was still working. I tried flashing a stock firmware using ODIN but it stopped responding. I waited for an hour and pulled the plug.
Download mode is still working so I tried different stock rom with both single file versions (PDA) and the 3 file versions (PDA,PHONE and CSC) with pit and repartition but all stop responding after a while.
It stops at cache.img for the single file ROMs and for the 3 file roms with pit it stops responding at SET PIT File. DO NOT TURN OFF TARGET. I also tried Lightening Rom and that stopped at factory.fs NAND Write.
I checked and double checked all drivers, chaged USB ports and tried reflashing a number of times.
Now when I try to boot or enter recovery I get the message "Firmware upgrade encountered and issue. Please select recovery mode in Kies and try again"
Kies is able to recognize the device but it tries to connect and then says "The device has stopped responding. Reboot to fix this issue" So I am unable to recover firmware using Kies.
TLDR :
There are no driver issues or interference between Kies and Odin. The device is easily recognized and download mode is working. Just unable to flash back to stock rom using odin, unable to boot or enter recovery mode.
Right now the only consolation is that download mode is still working but I am unable to flash anything. Also I had to get stock roms form external sites and smafirmware.com because the Official Firmware Links are from multiupload and they do not work.
Are there any mirrors for the official stock ROMS?
I am trying to flash different roms with ODIN and hoping for something to happen.
Suggestions/Solution to this unique problem will be much appreciated.
This is an unusual problem.
Try to flash the Kernel only via Odin.
Do let me know if you succeed.
[email protected]!n said:
This is an unusual problem.
Try to flash the Kernel only via Odin.
Do let me know if you succeed.
Click to expand...
Click to collapse
I am now using only ODIN. When you say Kernel I assume just the small stock Kernel File (5-10 MB) and not the entire ROM (~350 MB)
In download mode, in the top left corner, the current Binary was show as "Custom"
I used ODIN to flash Stock Kernel (Kernel_I9100XWKF3) and this was the progress:
Firmware Update Start..
zImage
NAND Write Start..
Now it stops responding (waited 20 mins ) but now the Current Binary is shown as "SAMSUNG OFFICIAL"
However, I am still unable to flash a complete stock ROM and cannot boot or enter recovery.
Stock firmwares are available at samfirmware.com. Try one from there. Once you flash, do a full wipe/factory reset. Seems you'll always have to do this when going from ICS to Gingerbread.
Also, from your post above, it sounds like you are still on an ICS ROM (XXLPH), and tried flashing a Gingerbread kernel (XWKF3). This will never work...
Sent from my GT-I9100 using XDA
ctomgee said:
Stock firmwares are available at samfirmware.com. Try one from there. Once you flash, do a full wipe/factory reset. Seems you'll always have to do this when going from ICS to Gingerbread.
Also, from your post above, it sounds like you are still on an ICS ROM (XXLPH), and tried flashing a Gingerbread kernel (XWKF3). This will never work...
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I tried firmwares from samfirmware.com. The problem is that I am unable to complete the flash process as odin always gets stuck at some point (Mostly KERNEL Stage) .
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> boot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010> Sbl.bin
<ID:0/010> param.lfs
<ID:0/010> zImage
It stops here.Unless I complete a flash I cannot full wipe/factory reset.
Also, I tried flashing an older XWKE8 Rom from samfirmware and the message "Firmware upgrade encountered and issue. Please select recovery mode in Kies and try again" has disappeared. Now when I try to boot or enter recovery there is just a mobile icon and a PC icon connected my an exclamation mark inside an orange triangle
Like you said, it may be because I was on an ICS ROM and then tried to switch to Gingerbread. If So, What ROM do I try to flash now?
Have a search for the GB bootloader and try flashing just that first .
GT-I9100_OLD_BOOTLOADER is the name of the file .
jje
JJEgan said:
Have a search for the GB bootloader and try flashing just that first .
GT-I9100_OLD_BOOTLOADER is the name of the file .
jje
Click to expand...
Click to collapse
Ok I got the bootloader and flashed it using ODIN. This is the first file that ODIN was finally successful in flashing. Thanks.
Something has changed. There is no longer a semi brick screen with the icons previously mentioned.The device now displays the boot screen showing "Samsung Galaxy S II GT-i9100" There is NO YELLOW TRIANGLE now. Finally some Progress. But it is stuck on this screen. Still no Recovery mode or normal boot.
This has however given me some hope. What do I do next?
Try a custom kernel i.e.
http://dl.dropbox.com/u/55089648/Siyah-v2.5.2.tar
download an unrar it.
Flash it with Odin.
Hopefully it works
lordtoeknee said:
Ok I got the bootloader and flashed it using ODIN. This is the first file that ODIN was finally successful in flashing. Thanks.
Something has changed. There is no longer a semi brick screen with the icons previously mentioned.The device now displays the boot screen showing "Samsung Galaxy S II GT-i9100" There is NO YELLOW TRIANGLE now. Finally some Progress. But it is stuck on this screen. Still no Recovery mode or normal boot.
This has however given me some hope. What do I do next?
Click to expand...
Click to collapse
If you have download mode just flash a stock rom if no download mode grab a USB recovery jig from ebay etc .
jje
[email protected]!n said:
Try a custom kernel i.e.
//dl.dropbox.com/u/55089648/Siyah-v2.5.2.tar
download an unrar it.
Flash it with Odin.
Hopefully it works
Click to expand...
Click to collapse
Tried flashing this. It get stuck at this stage :
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> zImage
<ID:0/006> NAND Write Start!!
Actually all kernels I have tried so far are getting stuck at this stage.
[email protected]!n said:
Try a custom kernel i.e.
http://dl.dropbox.com/u/55089648/Siyah-v2.5.2.tar
download an unrar it.
Flash it with Odin.
Hopefully it works
Click to expand...
Click to collapse
Dude. It still looks like he hasn't flashed a gingerbread firmware successfully yet. Which means he's really still on ICS. Siyah doesn't support ICS yet.
And typically, flashing only a kernel when in a situation as he describes won't get you out of that situation. Unless the reason you got into that situation in the first place was by flashing a kernel that wasn't meant for you.
Sent from my GT-I9100 using XDA
JJEgan said:
If you have download mode just flash a stock rom if no download mode grab a USB recovery jig from ebay etc .
jje
Click to expand...
Click to collapse
There was never any problem in getting into download mode. The actual problem is that ODIN gets stuck at some stage when I try to flash anything. I am unable to complete the flash.
The only success was the old bootloader which you suggested. Other than that all other kernels/roms get stuck at some point.
Most other posts/threads say that I will be fine as long as download mode is working. It is, but I am still unable to flash anything as ODIN keeps getting stuck.
Thoughts .
A guess is that something broke using PIT and repartition .
Rom download faulty no you have tried to many .
Bootloader flashes yes so Odin works .
Kies is not running in the task bar is it .
You are using mainboard USB port and Samsung cable .
If it was my phone it would be a service centre job but i would probably try just flashing a CWM and root kernel first to try and get recovery mode to format the system data and cache .
jje
Other possibilities for a stuck flash:
1. Bad cable
2. Cable plugged into a USB hub instead of directly into USB port on PC
3. Cable plugged into a USB passthrough (like keyboard) instead of directly into USB port on PC
EDIT: whoops, JJEgan mentioned bad cable and direct USB connection in his post above.
Thanks for your comments.
I am using the Original Samsung Cable and quite sure it has no problems. Also it is directly connected to my Laptop. And I have made sure there is no interference between Kies and Odin.
Maybe something broke in PIT and repartition, but i can still enter download mode. So I should be able to flash something right?
Not looking forward to taking it to the service center as I have will need to reset my flash counter. I may have to do that as a last resort but i'm hoping something will successfully flash. Like I said, I am hanging onto the fact that Download mode still works.
lordtoeknee said:
Thanks for your comments.
I am using the Original Samsung Cable and quite sure it has no problems. Also it is directly connected to my Laptop. And I have made sure there is no interference between Kies and Odin.
Maybe something broke in PIT and repartition, but i can still enter download mode. So I should be able to flash something right?
Not looking forward to taking it to the service center as I have will need to reset my flash counter. I may have to do that as a last resort but i'm hoping something will successfully flash. Like I said, I am hanging onto the fact that Download mode still works.
Click to expand...
Click to collapse
Hold up. Two things:
1. I just re-read your first post, and you mentioned GT-I9001, which is the Galaxy S plus... which is not the same as the GT-I9100, which is the Galaxy SII international edition. Is this a typo?
2. Have you been putting the .PIT file each time you flash? If so, what .PIT file are you putting, and where did you get it? Could be you flashed using an incorrect .PIT file, and need the right one.
Edit to add: you really don't have to put the .PIT file when you flash unless you ABSOLUTELY have to. I've flashed several times and not once used a .PIT file.
ctomgee said:
Hold up. Two things:
1. I just re-read your first post, and you mentioned GT-I9001, which is the Galaxy S plus... which is not the same as the GT-I9100, which is the Galaxy SII international edition. Is this a typo?
2. Have you been putting the .PIT file each time you flash? If so, what .PIT file are you putting, and where did you get it? Could be you flashed using an incorrect .PIT file, and need the right one.
Edit to add: you really don't have to put the .PIT file when you flash unless you ABSOLUTELY have to. I've flashed several times and not once used a .PIT file.
Click to expand...
Click to collapse
Sorry this was a typo. It is the GT-I9100 - Galaxy S II international edition.
I used the .PIT file and checked repartition whenever it was available with Stock Kernel. ie it came along with the PDA,PHONE and CSC files.
I also tried without the PIT file (No repartition). I did not use any incorrect file.
However, I was unable to do any successful flash. ODIN would stop responding before the PIT flash was completed. if there was no .PIT files it would stop at NAND write at cache.img or zImage
lordtoeknee said:
Sorry this was a typo. It is the GT-I9100 - Galaxy S II international edition.
I used the .PIT file and checked repartition whenever it was available with Stock Kernel. ie it came along with the PDA,PHONE and CSC files.
I also tried without the PIT file (No repartition). I did not use any incorrect file.
However, I was unable to do any successful flash. ODIN would stop responding before the PIT flash was completed. if there was no .PIT files it would stop at NAND write at cache.img or zImage
Click to expand...
Click to collapse
Ok... you said you're using original Samsung USB and you're quite sure it has no problems... but have you tried a different cable? It doesn't have to necessarily be the original Samsung cable. I use a generic micro USB cable for my flashes, and it works fine. Could be the cable went bad... or try a different USB port on your laptop. Maybe the port went bad.
Yes tried another cable as well as different ports. This should not be any problem as i am able to successfully flash bootloaders. Any other type of file, ODIN pauses at some stage and does not respond.
lordtoeknee said:
Yes tried another cable as well as different ports. This should not be any problem as i am able to successfully flash bootloaders. Any other type of file, ODIN pauses at some stage and does not respond.
Click to expand...
Click to collapse
Hmm... could possibly be a corrupted download... try redownloading the files you are flashing?
I had Crodorom working on my SGS2, downloaded the new Omega rom, flashed it and this is what I got: kernel panic upload mode. It doesn't go into recovery mode, only download, but when I try to flash something via odin, my laptop freezes. I don't know what else to do, tried flashing everything I have and every time freezes.
Please HELP ME!!!!:
Search.
http://forum.xda-developers.com/showthread.php?t=1521482
http://www.google.co.uk/search?clie..._upl=3091l3091l0l5344l1l1l0l0l0l0l63l63l1l1l0
jje
kernel panic upload mode
I was flashing custom ROMS from couple of months and did dozens of times.
But when I was flashing resurrection ROM an updated version, it completed but when I rebooted it was stuck in the kernel panic upload mode after the boot screen(galaxy s2). It was not going to clockworkmod recovery too. Then using the odin I tried to flash the stock ROM as well as custom ones. But it will finish, will stuck in the boot screen. Then flashed recovery using Odin and tried to flash custom roms. Couple of ROMS worked but most of them failed and stuck in the boot screen. I could able to restore the stock version which I saved previously.
But I cant try most of the ROMs now. CM9 didnt work.. But MIUI worked.
Can anyone help me.???
Go to formats and storage and delete cache and data before doing full wipes sometimes there is kinda like data blockage you need to get cwm can you flash it with odin
Sent from my GT-I9100 using xda premium
As far as others experience with the same issue, you should also be able to get download mod and flash a ROM from ODIN, freezing issue must be due to your connection or PC problem, try with another PC,
shashankdombe said:
I was flashing custom ROMS from couple of months and did dozens of times.
But when I was flashing resurrection ROM an updated version, it completed but when I rebooted it was stuck in the kernel panic upload mode after the boot screen(galaxy s2). It was not going to clockworkmod recovery too. Then using the odin I tried to flash the stock ROM as well as custom ones. But it will finish, will stuck in the boot screen. Then flashed recovery using Odin and tried to flash custom roms. Couple of ROMS worked but most of them failed and stuck in the boot screen. I could able to restore the stock version which I saved previously.
But I cant try most of the ROMs now. CM9 didnt work.. But MIUI worked.
Can anyone help me.???
Click to expand...
Click to collapse
Follow this http://forum.xda-developers.com/showpost.php?p=24648392&postcount=910
Yes.. but no improvements
djseaneq said:
Go to formats and storage and delete cache and data before doing full wipes sometimes there is kinda like data blockage you need to get cwm can you flash it with odin
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes I can flash using Odin.. It even succed and resets... But when it reboots it just stuck in the boot screen and cant boot in recovery too...
But if I flash just the CMW 4 it flashes and I can just access recovery and flash some ROMS from there..
---------- Post added at 10:54 AM ---------- Previous post was at 10:53 AM ----------
078gregory said:
Follow this http://forum.xda-developers.com/showpost.php?p=24648392&postcount=910
Click to expand...
Click to collapse
Tried it with the stock one which I got with mobile ... But it was not ROM.. just stock firmare... I will try with complete ROM.
Hayelp --- STUCK in KERNEL PANIC UPLOAD MODE
OK, so I did a stupid thing. I decided to use ROM Manager to move from CYANOGENMOD 9 (earlyish variant) to MIUI 2.5.11.
(I'm usually fairly comfortable/confident/competent doing this kind of thing - never bricked anything before - PSP, Galaxy S, Experia min pro, etc...)
I told ROM Manager to backup the ROM, and set it off to do its thing.
Next thing I'm aware of is "KERNEL PANIC UPLOAD MODE" and the text [ RST_STAT = 0x20000000 ] in red in the top left hand corner of the screen.
I've searched the Fora and found some others with a similar issue, so I tried a few things.
1stly I tried to get into ClockwordModRecovery mode, but was unable to.
But I got into Odin upload mode, so I dug out Odin, and an XW ROM, tried to download them to the device. No joy, so I tried another Odin XX ROM - also no joy. (Following various guides as to which ROM to try, and how to do it). Currently the ODIN Mode says.
ODIN MODE
PRODUCT NAME: GT-i9100
Custom Binary Download: Yes (1 counts)
Current Binary: Samsung Official
...
I could flash a new ROM over the existing one(it doesn't seem as if I can now...) and am currently on (I believe) Kernel_I9100XWLP7.
OK, so what to do next...
Well I tried to get back into CWM (on, up volume and home) to get into something which looked like CWMRecovery, but only gave 4 (?) options - reboot now, install update from SD, wipe Cache, wipe data - the wipe data came up with a password required, which I don't know so backed out of.
Oh, I downloaded KIES 2.0 to see if that could help - not in this instance it can't...
Now I'm stuck, I will try some other ODIN ROMs as that seems to be the only point of attack left to me.
Can anyone suggest anything else to try?
Please?
Argon0 said:
ODIN MODE
PRODUCT NAME: GT-i9100
Custom Binary Download: Yes (1 counts)
Current Binary: Samsung Official
Click to expand...
Click to collapse
if your status is above while you enter into Download mod, you should be able to flash a stock ROM from the ODIN, provided you have followed the steps correctly.
find any official stock ROM and flash it from ODIN after leraning well how to flash from ODIN.
prefer GB oficial ROM.
Further info:
Removal of Kies leads me to be able to use ODIN again. I have just been able to "flash" with Kernel_I9100XWLA4.tar.md5.
The phone is now stuck on the
"Samsung
GALAXY SII
GT-I9100"
Screen.
Argon0 said:
Further info:
Removal of Kies leads me to be able to use ODIN again. I have just been able to "flash" with Kernel_I9100XWLA4.tar.md5.
The phone is now stuck on the
"Samsung
GALAXY SII
GT-I9100"
Screen.
Click to expand...
Click to collapse
why do you try only the kernel....flash the same XWLA4 complete ROM.
Kies are installed for getting the required drivers installed, better you install Kies and just kill the application, from system tray too..
Firstly ZACQ8 I have tried that, can you recommend a specific ROM? (This is a UK T-mobile SGS2).
I can now get into the "Android System Recovery <3e>" screen.
It has four options:
reboot
apply update from SDCard
wipe data/factory reset
wipe cache partition.
The "command window" shows (in yellow):
-- Copying media files...
Successfully copied meida[sic] files.
# MANUAL MODE #
-- Updating applicaton...
{this bit in red}
E:check_point2: /sdcard/.ngmoco//53297255e6f7dd7073c89e6dea2da0d1 is not directory
{back to yellow}
Successfully update application.
-- Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/ODK/system/'.
Successfully applied multi-CSC.
that is the stock recovery, did you try both wipes there and reboot?
OMG - I can't believe I missed the "complete ROM" bit before... OK downloading the latest UK (XEU) version of Stock from:
http://skywanker.net/download/downl...9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.7z
Hope this works... (should have clicked earlier - this is taken a lot longer than the Kernel.. I wonder why!!!).
Thanks ZACQ8 - will click on the Thanks button if this works!
---------- Post added at 02:20 PM ---------- Previous post was at 01:54 PM ----------
OK, having installed that complete ROM. I'm still getting nowhere fast...
Now its stuck at SAMSUNG GALAXY SII GT-I9100 screen... (actually seems to cycle to that screen and go no further).
Now I can't get into the Android Recovery Screen Either...
Output from ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Will now try the XXLPS from: http://skywanker.net/download/downl...9100_XEO_I9100XXLPS_I9100OXALPS_I9100XXLPS.7z
---------- Post added at 02:22 PM ---------- Previous post was at 02:20 PM ----------
Yes, first one asked for a password (which I don't know), 2nd (cache) seemed to do as expected, but made no difference.
The factory reset password - if you do 3 fails at that it says one more go and then I'll damage the contents of the SDCARD - does this matter?
I'll add that there is nothing I don't have elsewhere on either the internal or external SD cards...
try GB roms...
Recovered from "KERNEL PANIC UPLOAD MODE"
GB ROMS from where? The letter coding is a little tricky to understand...
(I understand that XX and XW refer to UK type ROMS, is there a separate section/letter code for GB Roms?) - is this: http://skywanker.net/download/downl...9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.7z what you refer to as a GB ROM?
I now have a Galaxy SII booting up, into the stock ROM mentioned above. (well it seems to be booting I got the Android with the vector polyhedron in its tummy, and now the screen is showing a glowing S with Samsung Galaxy SII underneath it - I shall leave it at that for a few minutes before... well what next.. if its stuck here..) I guess another reboot and another ROM, or into recovery....
Got into recovery, did wipe cache and factory reset... booting now.... same as last time, but a little quicker to the glowing S...
Now its installing applications.... (KIES AIR, etc...)..
Connecting to WiFi - done (Working SIM is in other phone atm).
Signing in...
Restoring...
Ready to use !!! Y
<YAY>
what up now? from where are you downloading the ROMs from,
ICS roms are 4.0.3 and GB Roms are 2.3+
you can see the coplete list of ROM released here : http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#regiona
EDIT : I think you have not given much time to boot your phone....thanks GOD finaly it worked..
AH... GB = GingerBread - I thought you were referring to Great Britain!!!
Ho Hum.
I now have a working phone at least - ICS with Touchwiz (yuk)...
Now how do I put MIUI on it.. (any links to tutorials?)? Or do I go back to CM9?
(And yes I do need root, I want to use some remote desktop apps - such as Remote Call - so I can control the phone from my PC).
Last sucessful flash was LP7 right?
pick the CF-root for the same from the link CF-root below, download the zip, unzip it to get TAR file flash same like u flashed the ROM put it on PDA.
then you will get your phone rooted and CWM installed, then flash watever rom from CWM
Successful flash was GT-I9100_XEO_I9100XXLPS_I9100OXALPS_I9100XXLPS.tar.md5
Is there a reason why Odin doesn't get used to flash things like MIUI?
It would seem to be a good standard (and fairly safe) way to flash Galaxies...
Again, Thanks ZACQ8.
---------- Post added at 04:02 PM ---------- Previous post was at 03:22 PM ----------
DOH... Read the thread he points you to before typing anything new....
OK so if I have ...LPS I need to use this cf-root CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5.zip right?
---------- Post added at 04:10 PM ---------- Previous post was at 04:02 PM ----------
OK, just to keep this all in the same place, in case its useful for anybody else...
Yup that did seem to be the correct cf-root - I've now got a rooted stock Galaxy S2 - still with the yellow triangle, but that can stay for the moment. I guess the next bit is to put the MiuiAndroid.zip in the root of the sdcard...
Then boot into CWM, then install from sdcard... Lets see....
One other thing which might be useful for others is that I had to restart ODIN every time I wanted to flash, I couldn't flash, then reset reconnect and reflash. This is on Windows 7 Pro. Also I made sure I ran ODIN as administrator.
help accidently flashed a s2 rom on my s3,but luckly i flashed it via mobile odin so i still had cwm and did i recovery of my nandroid backup.
the phone still turns on everything works but it sometimes freezes after 5mins of use and i cant flash anything via odin anymore.
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do a full wipe, cache and dalvik....then flash a GS3 rom again
Sent from my GT-I9300 using xda premium
I cant I flashed a stock rom using mobile odin and lost root access
is there a way to root with out odin?
yeehaa said:
I cant I flashed a stock rom using mobile odin and lost root access
is there a way to root with out odin?
Click to expand...
Click to collapse
Get into download mode. Can you do that?
Sent from my GT-I9300 using XDA
yeah I can but I cant flash anything
Try with and older 1.8x version of ODIN.
yay it works thanks guys =D
Question... how come my phone still freezes on boot screen or else it reboots randomly when running on stock firmware?
ive tried to flash other firmware but the same thing still happens
yeehaa said:
Question... how come my phone still freezes on boot screen or else it reboots randomly when running on stock firmware?
ive tried to flash other firmware but the same thing still happens
Click to expand...
Click to collapse
Thats faulty firmware bad flash or an app causing problems .
Full wipe and revert to stock first .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
i did that but it still the same.... and how come when i try to wipe/factory reset i get an error
formattin /sdcard/android_secure...
error mounting /sdcard/android_secure!
skip format
oh and now my msg doesn't work zzzz
Try whit PIT file it wil work
Sent from my GT-I9300 using xda premium
nope doesn't work... omg............
I had a similar issue when flashing something with Mobile Odin went wonky. I was able to get into download mode and flash a stock firmware via full Odin but after that I was stuck at the splash screen. I solved the problem by booting into Samsung recovery (vol up + home + Power) and performed a factory reset there. I was then able to boot into the OS and start from scratch.
Follow the instructions and use mskip's toolkit.
It will solve your problem.
http://forum.xda-developers.com/showthread.php?t=1703488
Sent from my GT-I9300 using Tapatalk 2
yeah ill try your method alex.. but atm i cant seem to flash anything, it freezes...sigh......im so stupid for not checking before i flashed......
It happens to the best of us. Where is it freezing?
i got it to work yay only one problem... its really laggy now takes 3secs for the screen to turn on after pressing the unlock button
suggestions?
can I somehow format the whole root folder?
okay.. so I got it back to stock firmware...
and these are my problems...
1.my messaging app doesn't work (unfortunately, messaging has stopped) when I install omega rom it works again for some reason
2. when the screen is off it takes about 5secs to unlock the phone and sometimes it doesn't even turn back on.. this happens both on stock unrooted and omega. had to pull the battery to turn it back on
3. it sometimes freezes(1 out of 3 times) on the Samsung boot screen
what ive tried.....
1. in CWM I formatted everything I could and flashed a stock firmware.
2.hard reset using the dial pad
3.reset using stock recovery
4. flashed omega
5. wiped data
I still cant get my phone back to normal.....
also ive tried 4 or 5 different stock firmwares and still nothing..
its really pissing me off..
any suggestions?
yeehaa said:
okay.. so I got it back to stock firmware...
and these are my problems...
1.my messaging app doesn't work (unfortunately, messaging has stopped) when I install omega rom it works again for some reason
2. when the screen is off it takes about 5secs to unlock the phone and sometimes it doesn't even turn back on.. this happens both on stock unrooted and omega. had to pull the battery to turn it back on
3. it sometimes freezes(1 out of 3 times) on the Samsung boot screen
what ive tried.....
1. in CWM I formatted everything I could and flashed a stock firmware.
2.hard reset using the dial pad
3.reset using stock recovery
4. flashed omega
5. wiped data
I still cant get my phone back to normal.....
also ive tried 4 or 5 different stock firmwares and still nothing..
its really pissing me off..
any suggestions?
Click to expand...
Click to collapse
Boot into CWM, mounts and storage, format System, Data and cache then format dalvik cache, then flash custom rom
Sent from my GT-I9300 using XDA Premium HD app
Edit: Problem Solved!
This problem is caused by an auto-restore script in Canadian ICS notes. When the phone boots up, it restores the recovery image to the stock Android recovery. To fix this problem, follow the link kindly supplied by zaptor99:
zaptor99 said:
Detailed instructions for flashing CWM and rooting Canadian Note can be found here: http://forum.xda-developers.com/showthread.php?t=1775263
Click to expand...
Click to collapse
It worked for me!
Initial Post: So, after my ICS OTA update, I set about reinstalling CWM, then re-rooting the phone.
Steps followed:
Put phone into Download Mode(Power+Down Vol, then Up Vol at warning screen), successful.
Open ODIN, select CWM-i717-120305.tar.md5 (Also done with cwm-touch-i717-120414.tar.md5) as PDA
Plug in phone - Odin detects correctly.
Click Start; ODIN steps through it's business:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cwm-touch-i717-120414.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Seems successful, no?
Phone reboots, works normally.
Shut down phone, disconnect from PC
Boot into Recovery Mode (Vol Up+Vol Down+Power, as normal)
Aaaaaand, into Android System Recovery (3e).
Other information:
Before doing the Rogers OTA update, I reflashed to stock Rogers firmware using this post: http://forum.xda-developers.com/showthread.php?t=1657262
This process worked perfectly from Gingerbread - I installed CWMTouch, then a rooted kernel via ODIN.
I've no idea why I can't boot into CWM? I figure, either the ODIN write is failing (though it reports success), or it's writing to the wrong place. But without root, I'm not sure how I can check.
I'd be eternally grateful for any help. The phone works fine, now, but I *REALLY* don't want to be forever stuck on stock firmware with no way to make proper nandroid backups.
I am not sure why it is like that but it's exactly same on my i717m.
For me, I just went to CWM mode by pressing those keys before giving Note a full reboot.
I could get into CWM mode without a problem so I installed superuse. And my phone is fully rooted.
darknoon77 said:
I am not sure why it is like that but it's exactly same on my i717m.
For me, I just went to CWM mode by pressing those keys before giving Note a full reboot.
I could get into CWM mode without a problem so I installed superuse. And my phone is fully rooted.
Click to expand...
Click to collapse
I can't get into CWM. It seems to flash fine, but when I try to reboot into CWM, it loads the stock Android Recovery instead, so I have no way to flash superuser.
Edit: To be clear, my problem isn't getting root. It's getting CWM working, so I can move forward in any way. Once I've got CWM running, there's zounds of different ways to get root.
Further Edit: Attempts to flash CWM *are* increasing my flash counter.
Wintersdark said:
I can't get into CWM. It seems to flash fine, but when I try to reboot into CWM, it loads the stock Android Recovery instead, so I have no way to flash superuser.
Edit: To be clear, my problem isn't getting root. It's getting CWM working, so I can move forward in any way. Once I've got CWM running, there's zounds of different ways to get root.
Further Edit: Attempts to flash CWM *are* increasing my flash counter.
Click to expand...
Click to collapse
try TWRP or try to redownload CWM maybe you just got a bad zip
Bradl79 said:
try TWRP or try to redownload CWM maybe you just got a bad zip
Click to expand...
Click to collapse
How can I install TWRP on an unrooted phone without cwm installed? Is there an ODIN friendly tar kicking about? I looked but without success.
My zips are known good, though, used them to install CWM back on Gingerbread.
I just came to the q&a forums to post the same think. I tried flashing CWM 3 times and Im still going into stock recovery. I managed to go into CWM once and was able to flash SU so I have root but when I try to go back to recovery, I end up at stock recovery.
Sent from my SGH-I717M using xda app-developers app
id_mew said:
I just came to the q&a forums to post the same think. I tried flashing CWM 3 times and Im still going into stock recovery. I managed to go into CWM once and was able to flash SU so I have root but when I try to go back to recovery, I end up at stock recovery.
Sent from my SGH-I717M using xda app-developers app
Click to expand...
Click to collapse
You're freshly into ICS as well? did you upgrade OTA or with Kies? Bdfore upgrading, did you flaah the "stock Rogers original firmware" from here on XDA?
Trying to pin down the common thread, as this appears to be happening to several people.
Wintersdark said:
You're freshly into ICS as well? did you upgrade OTA or with Kies? Bdfore upgrading, did you flaah the "stock Rogers original firmware" from here on XDA?
Trying to pin down the common thread, as this appears to be happening to several people.
Click to expand...
Click to collapse
I reverted back to Bell stock firmware and updated ics OTA.
I tried flashing CWM recovery a couple of times and I noticed the only time I can get into CWM is when I flash and press the volume up + down and the power button before my phone full reboots after the flash.
That way It works but right after the phone reboot for the first time after flashing CWM, it will not fo back into it.
Can anybody help us?
How can we try TWRP if we can't get into CWM?
Sent from my SGH-I717M using xda app-developers app
Interesting! If you can get into CWM that way (reflash and squeeze in) try doing that and using cwm to flash SuperUser.
Then, once rooted, install ROM Manager and have it reflash the latest CWM, maybe that will get us a good cwm install.
cwm 5.8.4.8 works flawlessly.
Sent from my SGH-I717M using xda app-developers app
Wintersdark said:
Interesting! If you can get into CWM that way (reflash and squeeze in) try doing that and using cwm to flash SuperUser.
Then, once rooted, install ROM Manager and have it reflash the latest CWM, maybe that will get us a good cwm install.
Click to expand...
Click to collapse
I actually flashed CWM went into it before my phone rebooted and flashed TWRP and same think happened, when my phone rebooted I loose my flashed recovery.
I doubt Rom manager would work.
Sent from my SGH-I717M using xda app-developers app
id_mew said:
I actually flashed CWM went into it before my phone rebooted and flashed TWRP and same think happened, when my phone rebooted I loose my flashed recovery.
I doubt Rom manager would work.
Sent from my SGH-I717M using xda app-developers app
Click to expand...
Click to collapse
It seems like its somehow reverting the restore partition on boot. i suspect it may be a scripted event "on next boot" after ODIN, so flashing another recovery then wouldnt help - the on next boot event happening again when you reboot.
However, ROM Manager would give you a chance to reflash recovery after that happens. Its a xhance, anyways. Seems to have worked for dark? I can't try until after work today.
Plz update me when u give Rom manager a try.
Sent from my SGH-I717M using xda app-developers app
Wintersdark said:
So, after my ICS OTA update, I set about reinstalling CWM, then re-rooting the phone.
Steps followed:
Put phone into Download Mode(Power+Down Vol, then Up Vol at warning screen), successful.
Open ODIN, select CWM-i717-120305.tar.md5 (Also done with cwm-touch-i717-120414.tar.md5) as PDA
Plug in phone - Odin detects correctly.
Click Start; ODIN steps through it's business:
Phone reboots, works normally.
Shut down phone, disconnect from PC
Boot into Recovery Mode (Vol Up+Vol Down+Power, as normal)
Aaaaaand, into Android System Recovery (3e).
Other information:
Before doing the Rogers OTA update, I reflashed to stock Rogers firmware using this post: http://forum.xda-developers.com/showthread.php?t=1657262
This process worked perfectly from Gingerbread - I installed CWMTouch, then a rooted kernel via ODIN.
I've no idea why I can't boot into CWM? I figure, either the ODIN write is failing (though it reports success), or it's writing to the wrong place. But without root, I'm not sure how I can check.
I'd be eternally grateful for any help. The phone works fine, now, but I *REALLY* don't want to be forever stuck on stock firmware with no way to make proper nandroid backups.
Click to expand...
Click to collapse
I did EXACTLY as you did. But I used cwm-i717-120305.tar instead. Does it make a difference if the file is .tar and not .md5? Because CWM recovery stayed on mine and works perfectly.
Agoattamer said:
I did EXACTLY as you did. But I used cwm-i717-120305.tar instead. Does it make a difference if the file is .tar and not .md5? Because CWM recovery stayed on mine and works perfectly.
Click to expand...
Click to collapse
Did you install ICS OTA over pure stock Gingerbread? This doesnt seem to happen to people who had a modded recovery before installing the ICS update.
Wintersdark said:
Did you install ICS OTA over pure stock Gingerbread? This doesnt seem to happen to people who had a modded recovery before installing the ICS update.
Click to expand...
Click to collapse
It was pure stock Gingerbread. I was running an ATT leaked ICS version with CWM installed. But to get the Rogers update I used odin to restore the gingerbread version from here: http://forum.xda-developers.com/showthread.php?t=1657262
I did not install CWM or root before I used Kies to get the ICS update. But I see the difference now. I used Kies to get the update and you used OTA. Maybe if you went back to gingerbread and used Kies this time to get the update, it might fix your issue??
Any luck from Rom Manager?
I'm at at a wedding now so I won't be able to try it.
Sent from my SGH-I717M using xda app-developers app
Detailed instructions for flashing CWM and rooting Canadian Note can be found here: http://forum.xda-developers.com/showthread.php?t=1775263
zaptor99 said:
Detailed instructions for flashing CWM and rooting Canadian Note can be found here: http://forum.xda-developers.com/showthread.php?t=1775263
Click to expand...
Click to collapse
That's fantastic! Thanks so much for the linkage there
zaptor99 said:
Detailed instructions for flashing CWM and rooting Canadian Note can be found here: http://forum.xda-developers.com/showthread.php?t=1775263
Click to expand...
Click to collapse
Thanks Zaptor! it worked.
Finally, this gave me enough trouble.
Hi all,
I have a problem with my S3 and got stuck about how to fix it.
I have CWM installed to root the mobile, it was working fine for 8 months.
A few days ago the S3 started to freezing. I kept using and after an usual freeze, I restarted and got stuck in this message:
"Firmware upgrade encountered an issue.
Please select recovery mode in Kies and try again"
Kies do not find my device.
I can boot in the download mode, but can not boot in the recovery mode.
At the download menu have the info:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
I downloaded a original ROM, from before the Exynos correction and flashed though Odin. The flash was ok, but at the end the mobile restarted in the same screen (Firmware upgrade encountered an issue) and in Odin showing in a blue box the info "RESET!". I reset the mobile and then Odin said PASS!. But I'm still stuck in the firmware error screen.
After this, at the download menu, the info changed to:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
I also tried to flash a CWM recovery to see If I could access the recovery menu, the flash was Ok but I still can not go to the recovery menu.
What should I try right now?
I'm not an advanced user and I don't know if this is related to kernell, bootloader or PIT, but I want to try if there is a change of revival my mobile.
Thanks in advance
A few days ago the S3 started to freezing
read the freezing thread/ faq .
jje
lfferraz said:
Hi all,
I have a problem with my S3 and got stuck about how to fix it.
I have CWM installed to root the mobile, it was working fine for 8 months.
A few days ago the S3 started to freezing. I kept using and after an usual freeze, I restarted and got stuck in this message:
"Firmware upgrade encountered an issue.
Please select recovery mode in Kies and try again"
Kies do not find my device.
I can boot in the download mode, but can not boot in the recovery mode.
At the download menu have the info:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
I downloaded a original ROM, from before the Exynos correction and flashed though Odin. The flash was ok, but at the end the mobile restarted in the same screen (Firmware upgrade encountered an issue) and in Odin showing in a blue box the info "RESET!". I reset the mobile and then Odin said PASS!. But I'm still stuck in the firmware error screen.
After this, at the download menu, the info changed to:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
I also tried to flash a CWM recovery to see If I could access the recovery menu, the flash was Ok but I still can not go to the recovery menu.
What should I try right now?
I'm not an advanced user and I don't know if this is related to kernell, bootloader or PIT, but I want to try if there is a change of revival my mobile.
Thanks in advance
Click to expand...
Click to collapse
Hi, i would like to ask..have u tried "Vol+ button + Home button + Power button" dy?. Cos ur post didnt say anything about it. Download mode access same as recovery mode, BUT using Vol- button instead. And i assume u root your phone in ICS or JB? Cheers
Whitefang
Sent from my GT-P7500 using xda app-developers app
whitefang3456 said:
Hi, i would like to ask..have u tried "Vol+ button + Home button + Power button" dy?. Cos ur post didnt say anything about it. Download mode access same as recovery mode, BUT using Vol- button instead. And i assume u root your phone in ICS or JB? Cheers
Whitefang
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
Post said yes download mode no recovery mode .
jje
whitefang3456 said:
Hi, i would like to ask..have u tried "Vol+ button + Home button + Power button" dy?. Cos ur post didnt say anything about it. Download mode access same as recovery mode, BUT using Vol- button instead. And i assume u root your phone in ICS or JB? Cheers
Whitefang
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Yes, I've tried :
"Vol+ button + Home button + Power button" = Dont't do anything, goes to the same screen with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
And I was running ICS.
thanks
Have you read the freezing thread ???
jje
JJEgan said:
A few days ago the S3 started to freezing
read the freezing thread/ faq .
jje
Click to expand...
Click to collapse
I've read over 20 pages of this thread and didn't found cases of this brick.
I'll read the rest and post there.
thanks
Thats best to try as you have no warranty .
jje
Check this one
http://forum.xda-developers.com/showthread.php?t=2139927&page=2
Hope helps
Whitefang
whitefang3456 said:
Check this one
http://forum.xda-developers.com/showthread.php?t=2139927&page=2
Hope helps
Whitefang
Click to expand...
Click to collapse
I read this, but I can flash ROM through Odin without problem...
Right now I tried:
flash different .pit repartitions
flash recovery-cmwtouch
flash CF-Insecure
Flash official ROM post- Exodus
Flash official ROM pre- Exodus
and I am at the same error screen without access to recovery menu.
flash different .pit repartitions
Well and truly broke now .
Flash official ROM post- Exodus >> Not sure what you mean by that .
Anyway you need a service centre repair .
JJEgan said:
flash different .pit repartitions
Well and truly broke now .
Flash official ROM post- Exodus >> Not sure what you mean by that .
Anyway you need a service centre repair .
Click to expand...
Click to collapse
I tried the GT-I9300_mx_20120322, it got stuck after the download bar at the cellphone reached 100%, so I used the mx.pit and it was Ok.
Sorry, I wrote Exodus but I want to write Exynos. I used the old ROM because I coudn't reset my counter, but as it didn't worked, I've tried the latest with this exynos fix.
The only good think is that now I have the counter at 0 and the status Samsung official.
The bad news is that the purchase receipt got erased because it was print in thermic paper... Anyway I will try the warranty.
Meanwhile I will keep looking for a solution.
Thanks
Firmware upgrade encountered an issue and no recovery mode
:crying: since two days ago, I have the same problem... I tried with ODIN and it said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Here is the picture of what ODIN said!
Please help me out if you know what I have to do... :fingers-crossed:
U used a iamge from a i747 S3 did u noticed that?
Enviado do meu GT-I9300 através de Tapatalk
Install another recovey with odin!
Myhuu said:
Install another recovey with odin!
Click to expand...
Click to collapse
He needs to install more than a different recovery he flashed a rom for a different model
tallman43 said:
He needs to install more than a different recovery he flashed a rom for a different model
Click to expand...
Click to collapse
Well, he should flash the official firmware for his model with odin and than flash any custom rom he wants, but for his model )
Myhuu said:
Well, he should flash the official firmware for his model with odin and than flash any custom rom he wants, but for his model )
Click to expand...
Click to collapse
Yes he should have not recovery Good advice
Ver3go said:
U used a iamge from a i747 S3 did u noticed that?
Enviado do meu GT-I9300 através de Tapatalk
Click to expand...
Click to collapse
Of course, my cell phone is a SGH-I747, AT&T Samsung Galaxy 3.
82apl said:
Of course, my cell phone is a SGH-I747, AT&T Samsung Galaxy 3.
Click to expand...
Click to collapse
Then you have confused everybody because you posted in the wrong forum Post here http://forum.xda-developers.com/galaxy-s3-att