So I hate to be the frantic guy screaming for help cuz im normally pretty savvy at all this types of stuffs. But........
ZOMG [email protected]#[email protected]@[email protected][email protected]%!!
Im stuck pretty hardcore here. Allow me to give you the run down:
Was on Clean Rom Dev Edition. the newest version. ICS and the lot. But I wanted to try something different. Devil toast. When I tried to install the CM9 rom I got bootloops. I did some reading and found out this could be because I was S-on with hboot 1.50. So I found the JBEAR method for achieving s-off. It said I had to go back to stock so i tried to install a stock rom. didnt work. bootloops non stop. I tried a few different versions. odex, deodex blah blah blah. non of them worked. i only got bootloops. So I decided I would try and reinstall the Clean rom. That worked. I was able to reinstall it. I still wanted to try and get back to stock so I Got the RUU EXE and gave that a try. I only got errors and was unsuccessful at the RUU. So i figured what the heck I will try and do this with the rom i am already on. (since it says that it can work with some custum roms) gave it a try and got the still sober error a few times. I have tried about 5-6 times now with no luck. the phone wont boot into the rom. only the bootloader/fastboot. when i try to load CWM it wont mount my sd card so i can try installing a rom. if i try and power on the phone normally it just goes to a black screen with the word "juopunutbear" hanging above a phone. What should my next step be XDA friends? what can I do to get myself out of this situation. and wind up with soff and some devil toast!?
sorry if im being a noob. but i really need some help. thanks guys
djkozdefantastico said:
So I hate to be the frantic guy screaming for help cuz im normally pretty savvy at all this types of stuffs. But........
ZOMG [email protected]#[email protected]@[email protected][email protected]%!!
Im stuck pretty hardcore here. Allow me to give you the run down:
Was on Clean Rom Dev Edition. the newest version. ICS and the lot. But I wanted to try something different. Devil toast. When I tried to install the CM9 rom I got bootloops. I did some reading and found out this could be because I was S-on with hboot 1.50. So I found the JBEAR method for achieving s-off. It said I had to go back to stock so i tried to install a stock rom. didnt work. bootloops non stop. I tried a few different versions. odex, deodex blah blah blah. non of them worked. i only got bootloops. So I decided I would try and reinstall the Clean rom. That worked. I was able to reinstall it. I still wanted to try and get back to stock so I Got the RUU EXE and gave that a try. I only got errors and was unsuccessful at the RUU. So i figured what the heck I will try and do this with the rom i am already on. (since it says that it can work with some custum roms) gave it a try and got the still sober error a few times. I have tried about 5-6 times now with no luck. the phone wont boot into the rom. only the bootloader/fastboot. when i try to load CWM it wont mount my sd card so i can try installing a rom. if i try and power on the phone normally it just goes to a black screen with the word "juopunutbear" hanging above a phone. What should my next step be XDA friends? what can I do to get myself out of this situation. and wind up with soff and some devil toast!?
sorry if im being a noob. but i really need some help. thanks guys
Click to expand...
Click to collapse
Have you tried running the stock RUU in fastboot? I usually get errors when I try and run the RUU in andriod but no issue when in fastboot.
djkozdefantastico said:
So I hate to be the frantic guy screaming for help cuz im normally pretty savvy at all this types of stuffs. But........
ZOMG [email protected]#[email protected]@[email protected][email protected]%!!
Im stuck pretty hardcore here. Allow me to give you the run down:
Was on Clean Rom Dev Edition. the newest version. ICS and the lot. But I wanted to try something different. Devil toast. When I tried to install the CM9 rom I got bootloops. I did some reading and found out this could be because I was S-on with hboot 1.50. So I found the JBEAR method for achieving s-off. It said I had to go back to stock so i tried to install a stock rom. didnt work. bootloops non stop. I tried a few different versions. odex, deodex blah blah blah. non of them worked. i only got bootloops. So I decided I would try and reinstall the Clean rom. That worked. I was able to reinstall it. I still wanted to try and get back to stock so I Got the RUU EXE and gave that a try. I only got errors and was unsuccessful at the RUU. So i figured what the heck I will try and do this with the rom i am already on. (since it says that it can work with some custum roms) gave it a try and got the still sober error a few times. I have tried about 5-6 times now with no luck. the phone wont boot into the rom. only the bootloader/fastboot. when i try to load CWM it wont mount my sd card so i can try installing a rom. if i try and power on the phone normally it just goes to a black screen with the word "juopunutbear" hanging above a phone. What should my next step be XDA friends? what can I do to get myself out of this situation. and wind up with soff and some devil toast!?
sorry if im being a noob. but i really need some help. thanks guys
Click to expand...
Click to collapse
Boot your phone into fastboot. Plug it into the computer. Open up your command prompt and change your directory to whatever folder you created when you unlocked your bootloader. Then type fastboot oem lock. After doing this, you should be able to install your stock ROM either form your phone or via RUU on the computer. Let me know if you have any problems.
So heres the Update:
I finally got the phone jbeared. and installed jbear hboot. flashed devil toast and got no service or wifi. everytime i tried to connect to wifi the phone would reboot. did as mush reading and digging as i could to find out if anyone had the same prob. couldnt find anything. and wanted to go to bed for the night. so i just flashed back to clean rom dev edition because i had no problems with it before. but now I cant send or recive text messages. my data works fine. but no SMS at all. i get sms errors everytime i try to send one. i used one of my friends phones to send myself a text and i didnt receive it. what do you think the issue is?
djkozdefantastico said:
So heres the Update:
I finally got the phone jbeared. and installed jbear hboot. flashed devil toast and got no service or wifi. everytime i tried to connect to wifi the phone would reboot. did as mush reading and digging as i could to find out if anyone had the same prob. couldnt find anything. and wanted to go to bed for the night. so i just flashed back to clean rom dev edition because i had no problems with it before. but now I cant send or recive text messages. my data works fine. but no SMS at all. i get sms errors everytime i try to send one. i used one of my friends phones to send myself a text and i didnt receive it. what do you think the issue is?
Click to expand...
Click to collapse
Try reflashing the radio (PG86IMG.zip). Put it on your SD card, and boot into bootloader and follow instructions.
I never quite understood what radio I should use. How do I go about finding that out?
again sorry for being a noob.
So I tried reflashing the radio. No luck. Im still getting errors. "radio interface resource shortage" when I press details it says "cause code: 64, error class: 2" recommendations from here? I have tried updating PRL. nothing has worked so far.
djkozdefantastico said:
So I tried reflashing the radio. No luck. Im still getting errors. "radio interface resource shortage" when I press details it says "cause code: 64, error class: 2" recommendations from here? I have tried updating PRL. nothing has worked so far.
Click to expand...
Click to collapse
Did you activate the phone after bear?
Sent from my PG86100 using xda premium
djkozdefantastico said:
So I tried reflashing the radio. No luck. Im still getting errors. "radio interface resource shortage" when I press details it says "cause code: 64, error class: 2" recommendations from here? I have tried updating PRL. nothing has worked so far.
Click to expand...
Click to collapse
If you are on sprint and on a sense Rom , dial ##3282# click edit mode, enter your msl number (if you don't know what is your msl number, download msl reader from play store or anywhere and install it on your phone, it requires root access) then data profile then hit menu button and click restore . Your phone should reboot and it should do the hands free activation......
And for the issues you are facing , are you wiping every partition (except sdcard) before flashing a new Rom? and before doing s-off were you flashing boot.IMG manually from fastboot after flashing ROMs?
mnomaanw said:
If you are on sprint and on a sense Rom , dial ##3282# click edit mode, enter your msl number (if you don't know what is your msl number, download msl reader from play store or anywhere and install it on your phone, it requires root access) then data profile then hit menu button and click restore . Your phone should reboot and it should do the hands free activation......
And for the issues you are facing , are you wiping every partition (except sdcard) before flashing a new Rom? and before doing s-off were you flashing boot.IMG manually from fastboot after flashing ROMs?
Click to expand...
Click to collapse
Installing MSL now. to try that. I will update you once i have done it.
And yes. I wipe everything from the mounts and storage section except the sd card. as well as dalvic cache, and cache partition. in CWM befor flashing a new rom. and the way I have been flashing roms is from this method:
http://forum.xda-developers.com/showpost.php?p=17660133&postcount=1877
That is really the only way i know how to flash on the evo3d. I was also gonna see if there was a better way to flash roms. with out having to be at a computer to do so?
thank you for your help
djkozdefantastico said:
Installing MSL now. to try that. I will update you once i have done it.
And yes. I wipe everything from the mounts and storage section except the sd card. as well as dalvic cache, and cache partition. in CWM befor flashing a new rom. and the way I have been flashing roms is from this method:
http://forum.xda-developers.com/showpost.php?p=17660133&postcount=1877
That is really the only way i know how to flash on the evo3d. I was also gonna see if there was a better way to flash roms. with out having to be at a computer to do so?
thank you for your help
Click to expand...
Click to collapse
ok , tell us how it goes for you.
The phone refuses to do the hands free activation now. it did it right after i finished the jbear. but now its not doing it. it wont update the profile. wont update the prl. now my data is gone =[
djkozdefantastico said:
The phone refuses to do the hands free activation now. it did it right after i finished the jbear. but now its not doing it. it wont update the profile. wont update the prl. now my data is gone =[
Click to expand...
Click to collapse
try changing active profile from 0 to 1 in data profile to get data working again....
if data starts working , try updating prl and update profile too.
Is there a way to IM you?
Also, none of that worked. data is still gone. no activation. I just tried reflashing the rom. didnt work.
djkozdefantastico said:
Also, none of that worked. data is still gone. no activation. I just tried reflashing the rom. didnt work.
Click to expand...
Click to collapse
try making a call and you will be redirected to sprint for activation. if that doesn't work, try restoring data profile once again and then make a call
no luck. "error #16 switch 531" is what it says after ringing once. then hangs up. doesnt redirect me. tried up the same thing multipule times. no luck.
can you contact sprint from another phone? tell them about your activation issue.....don't tell them you s-offed your device .
Yea. I will call them tomorrow when I get off of work. Any advice on that I should say to them. like what caused the malfunction, ect...?
check if this helps support.sprint.com/support/article/...e-wh164052-20110615-165318?&INTNAV=SU:DP:HDIB
Related
Ok so a couple days ago in preperation of selling my evo 3d , i flashed a new rom of which i cant remember , i also beleive i flashed silverneedle kernel through the gpl tool app. Ever since no matter what i do , i cant get past the white HTC screen , it just reboots from there . Ive tried the superwipe tool and it seemed like it was going to work , but nothing . Ive also looked over several threads on here and no one seemed to have had an answer, thus im making my own thread. Im currently trying to flash warm 2.3 rom. I even thought maybe it was a bad transfer to the sd card because the sd card was acting funky when the rom was being transfered to it in my galaxy s2 so then i just downloaded it dirtectly from dolphin browers to the root of the sd card right from the galaxy to see if that was the problem. Still nothing , just the htc screen. Anybody have any idea how to fix this? I just want the phone back to stock so i can sell it , ugh. O and im on HBOOT 1.5 with the official HTC unlock and S-on.
I'm in the same boat. Fairly new evo 3d with hboot 1.5 rooted through htc. I've been flashing several roms over the last few days all with success, found I like Xplod XE from team nocturnal the best, nice and fast. What i found was that the kernel never changed, as I had read would happen with s-on. After doing some reseach and trying a few things I ran into your problem. Now no matter what or how i flash i'm stuck in a boot loop at the white HTC screen. The last kernels I've attempted to push were Tiamat_E3D-v1.1.0-Sense and silverneedle-test5. I've tried various combinations of wiping both caches with and without factory reset/system wipe as well as flashing several roms with success, still stuck with the boot loop. Flashed all roms through TeamWin Recovery and pushed kernels through clockwork recovery via fastboot/cmd promt.
Darthdaddy said:
.... and pushed kernels through clockwork recovery via fastboot/cmd promt.
Click to expand...
Click to collapse
Not sure about this.
But when flashing kernels, it happens through fastboot. You shouldnt see clockwork anything.
I dont quite understand adb or how to push things through command prompt so im not even going there but i have tried the RUU method and i keep getting an unknown error at the end of things and then nothing happens. Through all of this i still have recovery , which is good , but its becoming useless because nothing is sticking. Previously the gpl app let me flash kernels flawelessly. I had a cracked screen and a replacment put on. I take it home , power up the evo and notice that its acting really buggy and funny , so i flash a new rom and kernel and am now in the never ending bootloop mode. Its getting really frusuturating. Im about to try re locking it and see if that works. I dont even care if i lose root , just want to go back to a fresh phone.
carnivalrejectq said:
I dont quite understand adb or how to push things through command prompt so im not even going there but i have tried the RUU method and i keep getting an unknown error at the end of things and then nothing happens. Through all of this i still have recovery , which is good , but its becoming useless because nothing is sticking. Previously the gpl app let me flash kernels flawelessly. I had a cracked screen and a replacment put on. I take it home , power up the evo and notice that its acting really buggy and funny , so i flash a new rom and kernel and am now in the never ending bootloop mode. Its getting really frusuturating. Im about to try re locking it and see if that works. I dont even care if i lose root , just want to go back to a fresh phone.
Click to expand...
Click to collapse
The info here should fix you up. Lock the phone before you run the RUU.
Edit: Also, I never found the need to push files from adb. I just put them in my c:\android-sdk-windows\tools folder. If they need to be on the sdcard, I just drag and drop.
Followed directions from another site to work through command prompt and get into recovery, pm me for the link. Made sure i had my rom file on my sd card, did a factory reset then manual install of rom via clockwork then rebooted. Went through fine.
tailsthecat3 said:
The info here should fix you up. Lock the phone before you run the RUU.
Edit: Also, I never found the need to push files from adb. I just put them in my c:\android-sdk-windows\tools folder. If they need to be on the sdcard, I just drag and drop.
Click to expand...
Click to collapse
Do i have to have adb setup to relock? i typed the fastboot oem lock into command prompt and nothing happened. i am on a different new computer than i was when i unlocked the phone in the first place.
carnivalrejectq said:
Do i have to have adb setup to relock? i typed the fastboot oem lock into command prompt and nothing happened. i am on a different new computer than i was when i unlocked the phone in the first place.
Click to expand...
Click to collapse
Youll need to have all the necessary files/programs which I imagine are fastboot, adb, device/android drivers...
Ok ive relocked the phone but RUU is not working , i still keep getting an error, and then when it gos back to the bootloader it says "Hboot version is Older!" and "Update Failed!" This time though RUU makes it a little further about a quarter of the way in where it says "sending" , before it does this , though. I never end up actually getting a progress bar on the phone or the little exclamation points. Im totally lost lol.
carnivalrejectq said:
Ok ive relocked the phone but RUU is not working , i still keep getting an error, and then when it gos back to the bootloader it says "Hboot version is Older!" and "Update Failed!" This time though RUU makes it a little further about a quarter of the way in where it says "sending" , before it does this , though. I never end up actually getting a progress bar on the phone or the little exclamation points. Im totally lost lol.
Click to expand...
Click to collapse
Try this. Watch the vid, download the files.
Frankly, you should be able to run the RUU, so long as youre 'relocked'. Thats how Ive done it, multiple times. Hopefully we can get you back to stock.(Which we can)
Whew , i finally got it! The last part there was my erorr for using an older RUU , i didnt look close enough and i thought i was using 2.08. So i dled the 2.08 one and now its all good to go. Haha literally been doing this since 930 am. Thanks for the help guys , btw.
Hello. I have a photon that was rooted and unlocked and all that. The thing is it somehow got the newest Motorola update. The question i have is can i reroot it. I would love to be able to run a different OS than just the stock one. Can someone help me here or do i have a nice paperweight
yes you can re-root it using the torpedo method. but unfortunately no unlocking at this time
foxsdaddy67 said:
yes you can re-root it using the torpedo method. but unfortunately no unlocking at this time
Click to expand...
Click to collapse
What he means is, you need to be unlocked to install a custom rom with custom kernel and you can no longer unlock. You have two rom options while still locked, but both are based off the blur you already have. You can still root, though.
from what I understand you can use boostrap recovery to install ROMs. i've yet to try it myself but others have used it
foxsdaddy67 said:
from what I understand you can use boostrap recovery to install ROMs. i've yet to try it myself but others have used it
Click to expand...
Click to collapse
Only roms without a custom kernel assuming you are still locked while using it.
Sorry.. but with "locked" you say.. bootloader, o gsm? In general at forum.. lock refers bl?
Sry, for my english :\
Thanks!
Enano08 said:
Sorry.. but with "locked" you say.. bootloader, o gsm? In general at forum.. lock refers bl?
Sry, for my english :\
Thanks!
Click to expand...
Click to collapse
Yes I'm referring to your bootloader. The gsm lock you are referring to only exists in the united states.
thanks for the info guys, well i did get the phone rooted and super user restored, see the thing is the phone was flashed and programmed for page plus, its still running on page plus service but i had 2 problems one being the nag screen to activate the phone for sprint and its constantly in roaming, i called page plus and they say yeah that will happen and no i wont be charged for it, i would be all happy if i could get the roaming off, i did however get rid of the sprint activation by deleting a apk called SprintOMADM,apk. now im not totally sure i need that apk or not but its gone now and i have no nag screen to activate it, it still makes calls just fine but im not sure im totally getting all my incoming phone calls or any notifications for voice mail, any sugestions on how i might be able to get rid of some of this stuff, like i said it was flashed rooted and unlocked before, i did use when i first had it that remote squad software but now it says it cant even read the phone, i was also told by them its probably that awsome new update 2.35. thanks alot again for your responses and ill keep popping in and out of here to see more responses
well disreguard the last post, I had some app downloaded on my phone used to flash roms... well basically what happened i restarted my phone and the app booted before the phone started and it said flash rom from zip file so i selected one that i downloaded here, and thinking it wouldnt work i selected it and hit ok, well it worked alright now the phone says Failed to boot 2, and just shows starting in RSD mode, now im screwed, I shouldnt have done that, I figured it was locked and wouldnt work now the phone is broke how can i get it back just to stock the way it was or am i totally screwed
mamba316 said:
well disreguard the last post, I had some app downloaded on my phone used to flash roms... well basically what happened i restarted my phone and the app booted before the phone started and it said flash rom from zip file so i selected one that i downloaded here, and thinking it wouldnt work i selected it and hit ok, well it worked alright now the phone says Failed to boot 2, and just shows starting in RSD mode, now im screwed, I shouldnt have done that, I figured it was locked and wouldnt work now the phone is broke how can i get it back just to stock the way it was or am i totally screwed
Click to expand...
Click to collapse
What rom did you flash and what little application did you use to flash it with? You're probably not screwed, we just need a bit of information on what steps you took.
Acvice said:
What rom did you flash and what little application did you use to flash it with? You're probably not screwed, we just need a bit of information on what steps you took.
Click to expand...
Click to collapse
well when i got that awsome update 2.35 from my son clicking yes to it, i tried just about any roms to get the phone back, first it was the electrify rom which i later find out dumb mistake on my part, anyway now and i mean right now i flashed the phone with rsd lite using the electrify rom 1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US..... from there i rooted the phone using the torpedo method, then i installed busybox and i forget which method i used but anyway it was all done in fastboot, once i got all that installed i downloaded a apk file system recovery which is MOTODX2_Bootstrap_signed.apk. plugged in the charger and booted up the system recovery or the bootstrap which ever you call it, and went into advanced and did a dalvik wipe i even hit fix permissions, i then hit go back and did a data- factory clear wipe, then went into install zip from sd card and i first used MOF.2.3.5.ish,v1.4.zip and that installed fine the problems i had was sometimes when i would do that i would get failed to boot 2 screen but i just used the unbrick zip that i downloaded here if anyone wants the name or link let me know, anyway.. once booted up with the MOF ish zip it would load fine but wouldnt save any settings or find any APNs or connect to any wireless networks in my house, but the wireless problem was clear it said error on it, so i knew the problem on that was it wasnt working derr. So this story is getting long now. anyway i then rebooted and turned on the bootstrap slash system recovery utility, and i installed first 2.3.x_libmoto_ril.so_198_7.zip and it aborted the install and failed. i then tried the next one in line which was 2.3.x_libmoto_ril.so_254_12.zip and that one installed fine so i rebooted and i got the failed to boot 2 screen and i did the unbrick sbf file on rsd lite and it booted fine, though still no saving of the settings and no wifi no cell service and no text or anything, I kept RSD lite open and i tried one more thing, 2.3.5sv2_198_7_radio.sbf and flashed it, the wifi for the house started working and i started getting bars on my cell service yay, well atleast i thought yay this is after weeks of not having a cell. well i thought all is well im done and fixed. NOPE im not fixed when i try and dial a number or even activate my phone i get nothing, no dial buzzing sounds like you get normally, no any kinds of sounds the call eventually times out and says called failed retry or cancel the call, i hit retry and i get the same thing. i even tried flashing the radio to 2.3.5sv2_254_12_radio. when i used that one it would save settings but i wouldnt get any cell signal or anything. so im back to square one. I need help. this phone is about 2 steps of getting thrown out the window. I just strated working again and i need this phone to call back customers and i cant afford a regular carrier so im on pageplus the phone was originally flashed through remote squad and worked great until i let my youngest son play a SNES emulator on it and it exited out of the program for some reason and it wanted to do the system update and he hit yes and it installed and screwed up everything. All i want now is to get the phone back to somewhat normal, I can use RSD lite, CDMA workshop, QPST, DFS 4.0.0.5 and a couple others if need be i can download anything i just need to be told what files i need and what i dont need to get the phone back to normal, cuz if i dont get this phone back to normal im just going to not get another pageplus card and throw the phone away and ill be back to not being able to work. thanks to all that has responded to the post here i really do apreciate the time you all have taken to help. sorry it took so long to get back to any of you here but i still need urgent help here badly please and thank you for your time to read this i hope i gave you all the info you needed to help me
I just write this.
Calm down, read the 2.3.5 sv2 custom sbf thread one more time and start from the beginning with unbrick steps. Everytime you do that process, you will understand it more and more and your phone will start to work again. Believe me.
peetr_ said:
I just write this.
Calm down, read the 2.3.5 sv2 custom sbf thread one more time and start from the beginning with unbrick steps. Everytime you do that process, you will understand it more and more and your phone will start to work again. Believe me.
Click to expand...
Click to collapse
im getting ready to try this now thank you
mamba316 said:
well when i got that awsome update 2.35 from my son clicking yes to it, i tried just about any roms to get the phone back, first it was the electrify rom which i later find out dumb mistake on my part, anyway now and i mean right now i flashed the phone with rsd lite using the electrify rom 1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US..... from there i rooted the phone using the torpedo method, then i installed busybox and i forget which method i used but anyway it was all done in fastboot, once i got all that installed i downloaded a apk file system recovery which is MOTODX2_Bootstrap_signed.apk. plugged in the charger and booted up the system recovery or the bootstrap which ever you call it, and went into advanced and did a dalvik wipe i even hit fix permissions, i then hit go back and did a data- factory clear wipe, then went into install zip from sd card and i first used MOF.2.3.5.ish,v1.4.zip and that installed fine the problems i had was sometimes when i would do that i would get failed to boot 2 screen but i just used the unbrick zip that i downloaded here if anyone wants the name or link let me know, anyway.. once booted up with the MOF ish zip it would load fine but wouldnt save any settings or find any APNs or connect to any wireless networks in my house, but the wireless problem was clear it said error on it, so i knew the problem on that was it wasnt working derr. So this story is getting long now. anyway i then rebooted and turned on the bootstrap slash system recovery utility, and i installed first 2.3.x_libmoto_ril.so_198_7.zip and it aborted the install and failed. i then tried the next one in line which was 2.3.x_libmoto_ril.so_254_12.zip and that one installed fine so i rebooted and i got the failed to boot 2 screen and i did the unbrick sbf file on rsd lite and it booted fine, though still no saving of the settings and no wifi no cell service and no text or anything, I kept RSD lite open and i tried one more thing, 2.3.5sv2_198_7_radio.sbf and flashed it, the wifi for the house started working and i started getting bars on my cell service yay, well atleast i thought yay this is after weeks of not having a cell. well i thought all is well im done and fixed. NOPE im not fixed when i try and dial a number or even activate my phone i get nothing, no dial buzzing sounds like you get normally, no any kinds of sounds the call eventually times out and says called failed retry or cancel the call, i hit retry and i get the same thing. i even tried flashing the radio to 2.3.5sv2_254_12_radio. when i used that one it would save settings but i wouldnt get any cell signal or anything. so im back to square one. I need help. this phone is about 2 steps of getting thrown out the window. I just strated working again and i need this phone to call back customers and i cant afford a regular carrier so im on pageplus the phone was originally flashed through remote squad and worked great until i let my youngest son play a SNES emulator on it and it exited out of the program for some reason and it wanted to do the system update and he hit yes and it installed and screwed up everything. All i want now is to get the phone back to somewhat normal, I can use RSD lite, CDMA workshop, QPST, DFS 4.0.0.5 and a couple others if need be i can download anything i just need to be told what files i need and what i dont need to get the phone back to normal, cuz if i dont get this phone back to normal im just going to not get another pageplus card and throw the phone away and ill be back to not being able to work. thanks to all that has responded to the post here i really do apreciate the time you all have taken to help. sorry it took so long to get back to any of you here but i still need urgent help here badly please and thank you for your time to read this i hope i gave you all the info you needed to help me
Click to expand...
Click to collapse
Wow - just Wow. Unreadable. You are truly fortunate that someone actually read that and offered advice.
yes it was a long post, yes it was all jumbled together, anyway i did all the stuff recccommended and it works. the only problem im having now is, its still not lockig onto the right cell tower or something here where i live.
I Have tried Remote Squads Full Flash and other ways of manually programming it and for some reason I cannot get it to lock onto verizon towers, its like it has me permenantly locked onto sprint. when i drive down the road about 8 miles or so i can go down at the sheetz in my area and I get locked onto a verizon tower there but as soon as i move from that area I lose it and it goes back to sprint towers, I talked with Pageplus and they told me some stuff about what SID and NID i should have in but im not sure if the info was correct they told me they didnt know pennsylvavnia all that good but here is some numbers to try .. im about to melt this thing
Try roam control.
Sent from my MB855 using xda premium
Not the first post a noob really wants to make...but I've been searching the forums for an answer to my problem, but can't seem to find the info on the issue I'm having. I've seen some that were close & tried what was posted there without any success. I've checked out the Don't Panic -- Please Read First, includes troubleshooting guide Thread By: om4
A few days ago, I tried to install CM10 on my 4G LTE w/S-ON / HBOOT- 1.19. I was able to unlock the bootloader & install TWRP. Everything seemed to go okay until I rebooted my phone after installing CM10. It just hung on the Cyanogenmod splash screen. I tried re-installing it & kept getting the same problem. Today, I tried to install MeanROM ICS v6.5, but it keeps saying install failed. If I let the phone boot up, it'll hang on the MeanRom splash screen. I can still get into fastboot so I know it has to be a software issue. I've been beating my head against the wall for the past few days & just don't know how to fix it. Right now I have a very expensive paperweight. I'm hoping someone can help me fix this & get my phone back up & running.
TIA
for the millionth time
flash the boot.img seperately in hboot
Get (Flash Image GUI) off the Play Store.
If yr S-ON then u have to flash the kernel separate. That's why the ROM's keep hanging.
sent from my EVO LTE
http://forum.xda-developers.com/showthread.php?t=1772769&highlight=fastboot+gui
flex360 said:
for the millionth time
flash the boot.img seperately in hboot
Click to expand...
Click to collapse
I've been trying this all day, but must be doing something wrong. I found this: http://forum.xda-developers.com/showpost.php?p=29417266&postcount=1397, but was wondering if you might have more info on option 3.
TIA
if you know how to Fastboot, go for it, but use the Boot.img from the ROM you are flashing.
popper668 said:
if you know how to Fastboot, go for it, but use the Boot.img from the ROM you are flashing.
Click to expand...
Click to collapse
It's the only option I have now, so I hope I can figure it out. Wish me luck. I know it's probably something stupid that I'm missing & it's driving me crazy. lol
For meanrom make sure you have twrp 2.2.2.0 or later to be able install. The kernel installer will force the phone to reboot upon first run, this is when the kernel installs. For cm10 or other aosp based roms be sure to properly wipe phone. Cache, dalvik, factory reset, and system. Fastboot the kernel using SDK, mini SDK, uniflash, or boot image flasher. Do not use clockwork mod recovery to install roms as it is known to damage internel storage and or misc partitions.
ADB Tools Mini SDK
Thanks for all the info!!! I'm glad I found this place!!! I was able to get my phone working again. I found this post: http://forum.xda-developers.com/showthread.php?t=1937949 from back in October and found out that I was putting the boot.img in the wrong location. Once I fixed that, I have my phone back. Now I have to get it re-activated because I had to switch back to my Hero because I wasn't sure how long this would take. I hope Sprint will activate it even though is not stock anymore.
buddahj said:
Thanks for all the info!!! I'm glad I found this place!!! I was able to get my phone working again. I found this post: http://forum.xda-developers.com/showthread.php?t=1937949 from back in October and found out that I was putting the boot.img in the wrong location. Once I fixed that, I have my phone back. Now I have to get it re-activated because I had to switch back to my Hero because I wasn't sure how long this would take. I hope Sprint will activate it even though is not stock anymore.
Click to expand...
Click to collapse
have your first thanks
lol
the thanks is for using the search function lol
Well now I have another small problem. When I try to use the camera or go into gallery, it says no external storage available. Looks like I'm off to search the forums again for a fix. I'm sure it's something minor.
It looks like it's the internal SD card. Under storage in settings it shows the external card's total space & the 3 GBs used for app data, ect...
When I try and mount the SD card, it says preparing card but doesn't do anything. I think I say something about changing something in TWRP.
Forgot to mention, I can't connect the phone via USB either.
Ha, fixed my SD card/USB issues by following the directions in this thread - http://forum.xda-developers.com/showthread.php?t=1812774
I've been searching all morning to find another thread to see if this has been answered before. I was trying to install a GSM Rom onto my Rezound. The install failed at around 2 %. I'm almost positive I thought I was on the correct ICS firmware, when apparently I wasn't. So instead of trying to fight installing the rom over and over again. I had a back up rom that I installed instead. My problem I think is that I didn't go back and re wipe everything after the failed install.
Which I could slap myself for, but my problem is this. The phone can go into Hboot, which gives me hope not all is lost. But I can't go into recovery or boot up. The phone will only load the white HTC screen then just reboots over and over again. I've seen where it tries to load recovery but then just reboots. I'm not sure if I have to reload the RUU or what I have to do. If anyone has had this problem or knows of a thread on how to fix it I would greatly appreciate it.
Edit: Just a little about my phone if it helps.
Vigor Pvt S-OFF RL
HBOOT - 2.25.0000
Radio - 1.22.10.0421r/1.22.10.0424r
OpenDSP- v13.6.0.7611.00.0104
eMMC-boot
Since you can't get to recovery it might be time to just put an RUU on you card and let hboot install it. Then you can install a recovery and then one of your backups.
Or just reinstall recovery
Sent from my Vivid 4G using Tapatalk 2
Ok, unfortunately I'm stuck at work and can't fix it right away. But I do thank you both for your help. I'll try the RUU first, since it needs to be done anyways. I was using Clockwork Mod Touch for my recovery before, is Amon Ra that much better ? I'll let you guys know the results soon as I can get it done.
stfumate said:
Ok, unfortunately I'm stuck at work and can't fix it right away. But I do thank you both for your help. I'll try the RUU first, since it needs to be done anyways. I was using Clockwork Mod Touch for my recovery before, is Amon Ra that much better ? I'll let you guys know the results soon as I can get it done.
Click to expand...
Click to collapse
I prefer CWM touch myself but the one from here not the official
stfumate said:
Ok, unfortunately I'm stuck at work and can't fix it right away. But I do thank you both for your help. I'll try the RUU first, since it needs to be done anyways. I was using Clockwork Mod Touch for my recovery before, is Amon Ra that much better ? I'll let you guys know the results soon as I can get it done.
Click to expand...
Click to collapse
If you plan to do a restore, stick to the same recovery.
Not sure how restoring over a previous rom borked your recovery though, that is weird.
mjones73 said:
If you plan to do a restore, stick to the same recovery.
Not sure how restoring over a previous rom borked your recovery though, that is weird.
Click to expand...
Click to collapse
Well I started off as I normally would, wiping data, wiping cache, wiping davlik, then installing. I tried one of the new JB roms Tron. But I couldn't get the GPS to work at all. So I stumbled across a GSM rom and went to install, it booted into it's own installation touch screen. I kept it simple not choosing many extras, then the last option was. Are you on ICS firmware? Which to my noobness, I've been running ICS roms since I acheived S-OFF. So I was pretty positive that I upgraded my firmware whenever I did that. So I chose Yes and it started to install, got to 2% and said it was done. Again I assumed the install had just failed and after having tried installing a GSM rom once before I had to go through and do it multiple times. I was tired and didn't feel like messing with it. So instead of rebooting, I went back into recovery and flashed another rom I had set on my SD card in case I didn't like the GSM. To which I think that my mistake came when I didn't either
A) Re-wipe my data, cache, davlik.
or
B) Restore my previous Rom from before.
So after the new rom installed and looked as everything went smooth. I selected reboot, the HTC white screen came up and the phone shut off. Then would power back up and display the HTC white screen and shut off again. So far the only thing I've been able to get it to do is the power cycle with the white screen and boot up in Hboot. But none of the options will work as the only thing it will do is power cycle. That's pretty much where I'm at until I can try reinstalling the RUU and flash the new(same) recovery.
The problem is nothing you've done there should have touched the recovery, that's why I find it weird.
I'd assume the rom asked which firmware you were on so it could installed the old firmware patch if needed.
Anyway, hopefully the RUU should straighten it out.
Well good news, re-installing the RUU fixed the phone. It re-locked my hboot, so I just finished unlocking that and re-flashing recovery. Thanks a bunch for all of your help. I greatly appreciate it !
PLEASE.
I have found lots of threads on this topic and nothing is working for me.
-I unlocked bootloader.
-Flashed Android revolution ROM
>WiFi stopped working..A device doesn't even show up to try and select just a blank menu (should be several routers showing)
-I have since tried using CyogenMod menu to do factory wipe/cache wipe then installed a new rom
- I have tried installing JmzStockATTOneDeodex, and RageOneV.1.1.0 after doing factory wipe/cache wipe
- I then found "RUU_Puccini_LTE_Rogers_WWE_1.26.631.4_Radio_1.05.550I.09v2_30.68.550I.12_release_219377_signed"
but this file doesnt seem to open at all it is a exe... and now .......I now am starting to lose my mind
PLEASEEEE HELP!
I am on Rogers LTE Network, HTC One, Canada.
I would really like to be able to flash the RageOne and have wifi work, PLEASE!!!!
millarrjm said:
please.
I have found lots of threads on this topic and nothing is working for me.
-i unlocked bootloader.
-flashed android revolution rom
>wifi stopped working..a device doesn't even show up to try and select just a blank menu (should be several routers showing)
-i have since tried using cyogenmod menu to do factory wipe/cache wipe then installed a new rom
- i have tried installing jmzstockattonedeodex, and rageonev.1.1.0 after doing factory wipe/cache wipe
- i then found "ruu_puccini_lte_rogers_wwe_1.26.631.4_radio_1.05.550i.09v2_30.68.550i.12_release_219377_signed"
but this file doesnt seem to open at all it is a exe... And now .......i now am starting to lose my mind
pleaseeee help!
I am on rogers lte network, htc one, canada.
I would really like to be able to flash the rageone and have wifi work, please!!!!
Click to expand...
Click to collapse
****. Now my ****ing internet wont work either **** me.
Please i need help asap!!! Someone pleaseeeeeeee
i cant believe i even tried this **** with my new device
i just want to go back to factory rogers setting for canada when my wifi and internet would work **** **** **** ****f uck :"(
Calm down. You found the solution yourself. That exe file is the ruu. Relock the bootloader put the phone in fast boot. Then run the program on your computer
gunnyman said:
Calm down. You found the solution yourself. That exe file is the ruu. Relock the bootloader put the phone in fast boot. Then run the program on your computer
Click to expand...
Click to collapse
So it didn't work..Also it said I have version 1.29.631.4 and this is 1.26.631.4 .. wouldn't I want the newer one? I never used a rom exe like this.. only flashed different rom zips from here.. the 3 available.
Also I am not posistive I MIGHT have used a "flash kernal" on one of the rom zips the android revolution one the very first time I installed it...
using "One_M7_All-In-One_Kit_v1.0" that is available here on at&t htc one part of forum. Then I kept reading and flashed it using recovery mode... and the rom worked well everything was fine except wifi... then today I flashed the others like I explained before trying to fix wifi and now the internet won't work as well. but the rest of the phone functions as it should and my carrier network works fine i can txt / call .
I follow your steps and it said this when I ran the exe..
ERROR[132]:SIGNATURE ERROR
The ROM Update Utility cannot update your android phone.
Please get the correct ROM update utility and try again.
--- Sorry this is kind of long, I just want to explain best for anyone reading this including yourself to understand what idiot things I did to bring myself to this conclusion, I am new to the community and a android noob
I have the same problem too,my HTC One wifi keep saying turning on and then error after root, i tried using the wifi tether app but its not working, any one can help please?
I've re-read your OP and you don't have the correct RUU for your device. You have an M7 not a Puccini, anyway like the At&T model a RUU for rogers doesn't exist yet.
As for fixing your wifi, your best hope is to restore your nandroid backup (I hope you made one) or find a Nandroid for your device. I know there's a thread over on the International forums with Nandroids in it, maybe find it there or make a request there.