Hi all.
I have an Chinese tablet Superpad 3 (fake FT Superpad 3) with a ID CEMX230 on the barcode sticker on the box.
The tabled had the startup screen loop problem, where after turning the device on it shows the android boot logo only.
After an unsuccessful flash (the file I've used was CEMX210,CEMX2108,CEMX230 5.31.7z), the device won't start at all.
Is there any solution to reflash it again (JTAG or other solution)?
Thanks for the help.
Related
Hello Guys. (Sorry for my english)
I have a goclever tab R75 tablet.
So..the problem is that I was Rooting my tablet with root that I found on this site and everything was going well, I checked the status on the rooting and it was done updating and it was checking the software. after few minutes it pops up with the "Goclever Android 4.0 onboard" screen, And my Tablet is stuck there!.. I can turn it off but this screen just comes everytime!
I Have tried to reset with the little hole on the back - didn't work
I Have tried to boot up on the sd cars - didn't work
So please help me someone if somebody can !
I have a 10.1 android tablet that was advertised as a Flytouch 10 superpad on but after a bit of research I discovered that it's a O.E.M/O.M.D tablet I used it for about 2 hours turned it off as I had things to do I turned it back on the manufacturer logo appeared then the silver android logo waited for a while then went back to manufacture logo then andriod again the process keeps repeating till battery goes flat found out it stuck in boot loop contacted seller said need Flash update via tf card (brand new 4G ) and use diskgenius.exe / Diskman_3.8.0 then burn software to card. The software is available in iuw_2.0.15a_beta_20121106 was on my friends P.C for 5 hours trying to do this and got nowhere really need help/advice manufacturer said would take full responsibility if it gets bricked been to various computer shops nobody will touch it or even try for me in Bolton area help me pleeeeeease
Do a google search for iuw, or Infotmic upgrade tool, or infotmic upgrade utility. That's the software used to flash them but you would still have to find the O.E.M. OS. May be try to boot into recovery via ADB(Android Debug Bridge) and try to attempt a system dump of your tablet.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Hello everyone. This is a long story, so thanks in advance to read it and try to help me.
I've got a Trekastor surftab Ventos 8.0 this one --> http://www.trekstor.de/detalles-de-surftabs/product/272.html?file=tl_files/generatedPdf/272-de.pdf
model st80208-2 . I'm not sure if it is the 8 or 16 GB. And I don't know how to check it because the tablet is bricked.
How did I brick the tab?
This is a good question. I had lost the charger and I tried with another one with a higher voltage. This ruined the batery. And when I found the charger the tablet show a strange behaviour. It was trying to start but reboot before to finish. I was able to finish a full boot but the batery only works for a few minutes. After solve the batery problem, now I can start the tablet without problem about the voltage but, it seems like all this failed attemps to boot have made some damage somewhere.
What I have now?
The tablet start. It show's the trekstor logo. After that it show's the android logo, and that's all. It stuck's looping in the android logo.
What I have tried?
Everything.
1.- Custom recovery. http://forum.xda-developers.com/showthread.php?t=2039964 or this http://forum.xda-developers.com/showthread.php?t=1995984
This method not working in my tablet even when it was not bricked. (I tried it, when I was trying to get root access a month ago).
Power + Volumen (-) gets nothing at all. It's start normally. (and loop in my currently situation)
Power + Volumen (+) gets this screen http://cdn.howtogeek.com/wp-content/uploads/2012/12/android-recovery-mode.jpg and anything happens no matter what button I'm pressing even with the custom recovery in the sdcard.
2.- I tried to flash the tablet, but I didn't find information about how to do it and trust me, I have searched a lot.
I triend with this software: "Amlogic Image Burning Tool v.1.6.2.2" and this firmware http://forum.xda-developers.com/showthread.php?t=2039964 . But I get the error "find no upgrade config, please load it manually". I'm pretty sure I doing something wrong, but I have no experience with this software or flashing in general.
That's all for now I'm tired of reading this forum and this other one in german. (thanks to google translator) http://www.android-hilfe.de/surftab-ventos-8-0-forum/ and I did not find anything useful for me
You people are my only hope. (Any Star wars fan in the room?:laugh:
So any help would be wonderful, thanks in advance and sorry for my mistakes, english is no my mother language.
Hi there
i have a ebay brought chinese tablet model number F900 sun8i chipset with a xdriod board 512mb ram running andriod 4.4.2 thats all i can tell you as its stuck on boot logo and cant get the computer to reconise it to try and reflash it can any one help
ET_F900_V1.5 board id
i have tries a few firmwares where i either get no touch screen or i have to press top of screen to use buttons at the bottom
thanks in advanced
james
Hello everyone, I bricked my tablet couple months ago while trying to install Stock firmware/rom.
The tablet in question is Realme Pad (RMP2103 if to be specific). It's bootlooping onto "orange state" screen and doesn't launch recovery. Tablet uses Mediatek processor (Helio G80).
I've tried roaming the internet to fix my issue, but it all failed.
Can anyone help me out?
Take it to authorized service center and let them try to fix it.