Hi, I have the orange i9100p - and rooted using the rachmat3 method
I could really do with a few pointers- Especially from people with the same phone version and root method
I've flashed ROMs before on other phones (desire, desire HD Touch Diamond) but the whole thing seems bewildering on this phone, I've spent days reading and still dont really know whats going on and whats the best way to proceed
So my phone is as stock, still with the Orange ROM updated to ICS, I assume it has stock kernels, but it is rooted etc
I was hoping to flash another ROM, maybe without the Orange stuff, and perhaps one that can use JKAY or something as everyone seems to think thats great and mine dosent seem to be supported. Also maybe deodexed if thats worth doing. I dont like the stock unlock screen, and also tried the s3 launcher and it didnt work on this current ROM - so I want to switch to something that will allow me to do these things.
The only trouble is I have no idea what do. Nothing ever seems to be the obvious way forward
These are some of the questions I keep coming up against -
Should I be able to do these things on my current ROM -
If I change ROMS will I loose NFC (should I care?)
Do I need to keep the same kernel to avoid brickbug risk, and to keep things simple, and if so how do I do that, they all seem to come with Kernel with Chainfire installed which I dont need right? (delete zimage out of the zip file?)
Should I flash with the temporary CWM, or use odin (I haven't used odin yet - can I use it with only the temporary CWM)
Are there any obvious ROMs that would be easy for me to get the above from
Here are some details -
model - gt i9100p
Android version 4.0.3
Baseband version i9100pbvlp7
kernel version [email protected]#3
build number IML74K.BVLP8
Anyone with this phone model in particular, or if you used Rachmat3's method - I'd love to hear what you've done
Free bump for an interesting title.
I'm in a similar situation to the original poster. Got the I9100P UK Orange phone and wanting to flash new firmware but a bit daunted by the information and options out there. I've flashed the old Samsung i8910 and that was pretty painless. The S2 seems a lot more complicated and with more potential problems!
If you can afford the risk, all you need to do is take the leap of faith. Rom and kernel are mostly "safe" to flash (except stock 4.0.4), if incompatible will result in soft brick the phone, where you only have to get it back to download mode and flash back a working one.
Yes, i think you will lose NFC...
It is daunting but dont just be like most of the noobs on here and proceed without doing any research first.
They dont even have the decency to read about basics like
What is cwm
How do I root
What is Odin
Sent from my GT-I9100
L1ndon said:
Hi, I have the orange i9100p - and rooted using the rachmat3 method
I could really do with a few pointers- Especially from people with the same phone version and root method
I've flashed ROMs before on other phones (desire, desire HD Touch Diamond) but the whole thing seems bewildering on this phone, I've spent days reading and still dont really know whats going on and whats the best way to proceed
So my phone is as stock, still with the Orange ROM updated to ICS, I assume it has stock kernels, but it is rooted etc
I was hoping to flash another ROM, maybe without the Orange stuff, and perhaps one that can use JKAY or something as everyone seems to think thats great and mine dosent seem to be supported. Also maybe deodexed if thats worth doing. I dont like the stock unlock screen, and also tried the s3 launcher and it didnt work on this current ROM - so I want to switch to something that will allow me to do these things.
The only trouble is I have no idea what do. Nothing ever seems to be the obvious way forward
These are some of the questions I keep coming up against -
Should I be able to do these things on my current ROM -
If I change ROMS will I loose NFC (should I care?)
Do I need to keep the same kernel to avoid brickbug risk, and to keep things simple, and if so how do I do that, they all seem to come with Kernel with Chainfire installed which I dont need right? (delete zimage out of the zip file?)
Should I flash with the temporary CWM, or use odin (I haven't used odin yet - can I use it with only the temporary CWM)
Are there any obvious ROMs that would be easy for me to get the above from
Here are some details -
model - gt i9100p
Android version 4.0.3
Baseband version i9100pbvlp7
kernel version [email protected]#3
build number IML74K.BVLP8
Anyone with this phone model in particular, or if you used Rachmat3's method - I'd love to hear what you've done
Click to expand...
Click to collapse
So, I have one galaxy s2 i9100p (O2). I come from a stock gb, rooted and flashed a new custom rom using the recovery mode, full wipe and every other things... I lost the nfc function and never found a method to bring this back but every other things are working fine, very fast and stable on 4.0.3 version with siyah kernel... i think you don't will have problems too but you will lose the nfc. it's your choise BTW, I have the stock ics rom with NFC (o2), I don't know but if you need, send me a PM, just flash the .tar file with odin and everything will work again (NFC), like factory new one (sorry my english :/)
L1ndon said:
Hi, I have the orange i9100p - and rooted using the rachmat3 method
I could really do with a few pointers- Especially from people with the same phone version and root method
I've flashed ROMs before on other phones (desire, desire HD Touch Diamond) but the whole thing seems bewildering on this phone, I've spent days reading and still dont really know whats going on and whats the best way to proceed
So my phone is as stock, still with the Orange ROM updated to ICS, I assume it has stock kernels, but it is rooted etc
I was hoping to flash another ROM, maybe without the Orange stuff, and perhaps one that can use JKAY or something as everyone seems to think thats great and mine dosent seem to be supported. Also maybe deodexed if thats worth doing. I dont like the stock unlock screen, and also tried the s3 launcher and it didnt work on this current ROM - so I want to switch to something that will allow me to do these things.
The only trouble is I have no idea what do. Nothing ever seems to be the obvious way forward
These are some of the questions I keep coming up against -
Should I be able to do these things on my current ROM -
If I change ROMS will I loose NFC (should I care?)
Do I need to keep the same kernel to avoid brickbug risk, and to keep things simple, and if so how do I do that, they all seem to come with Kernel with Chainfire installed which I dont need right? (delete zimage out of the zip file?)
Should I flash with the temporary CWM, or use odin (I haven't used odin yet - can I use it with only the temporary CWM)
Are there any obvious ROMs that would be easy for me to get the above from
Here are some details -
model - gt i9100p
Android version 4.0.3
Baseband version i9100pbvlp7
kernel version [email protected]#3
build number IML74K.BVLP8
Anyone with this phone model in particular, or if you used Rachmat3's method - I'd love to hear what you've done
Click to expand...
Click to collapse
Hi there,
I have the same phone model with the same kernel, radio and stock rom.
Did you manage to upgrade firmware to JB (which kernel and rom did you use) and keep NFC??
Related
Hello.
================
Gonna start off by saying I loved the noob video when signing up.
I also want to preface by saying I genuinely have looked - all day - and am still very confused.
I've been on iPhone since since the 3g, I loved it, but I wanted a change, and the GS2 gave me reason to change. I was massive into jailbreaking and customising, so naturally I want to tinker with this phone.
The problem is I don't have a clue. I know nothing about android, and I know nothing about rooting ect...
Any of the many guides I've seen all say different things, I can't seem to find one clear cut definitive guide.
================
I don't know what info you need so I'll just list what's in the "About Phone" menu.
Galaxy S2 i9100
Model Number - GT-I9100
Android Version - 2.3.3
Baseband Version - I9100BUKG1
Kernel Version - 2.6.35.7-I9100BUKG2-CL342890 [email protected] #2
Build Number - GINGERBREAD.BUKG2
It was bought in Ireland today on the Vodafone Network.
I know the pros and cons for Rooting - as I said I have been researching as much as I could, but now I just need pointing in the right direction to a guide that will suit my needs exactly.
Also, I have ordered a 16gb sd card for it, so I will have it soon, but I do have a 2gb one if that's any good for now? - Does the sd card retain the root or can all files be deleted off it after?
I thank you in advance for your help.
have a look here, i found it to be the easiest to follow and the kernal works great
http://forum.xda-developers.com/showthread.php?t=1182922
hope this helps
night....
Download his kernel (XXKG2) as your gingerbread is BUKG2
original firmwares and kernels http://forum.xda-developers.com/showthread.php?t=1075278
I think you want this
P.S. click on pic
i followed this guide . super easy.
http://forum.xda-developers.com/showthread.php?t=1103399
Chainfire stuff is awesome.
then have some fun . I'm loving the VillianROM stuff ,
http://forum.xda-developers.com/showthread.php?t=1198334
+
http://forum.xda-developers.com/showthread.php?t=1179814
, and for right now i'm very impressed with LeoMar75's rom and additions
http://forum.xda-developers.com/showthread.php?t=1171523.
hope this helps
Thanks a lot guys. I'm gonna have a good read through all of your suggestions now. I'll let you know how I get on.
Thanks again.
The easiest way to root is just put phone into download mode and flash CF-Root, it will automatically root your phone with busybox and other good stuff. I think you can then flash Stock kernel again if you don' want to use CF Root and the root will still remain intact.
Also, can I use a 2gb card for this then switch to a 16gb without it affecting anything?
Root is not involved with the external sd card so you can swap .
jje
So, If I follow this one [just to root] - does that mean I then can put other stuff on like kernels*? And if I decide I don't like the kernel can it be taken off? - or do I put another on top and it deletes the first?
Basically [as I'm brand new to rooting] what do I do after rooting?
You do nothing after rooting . All it does is open the door .
kernels can be flashed via Odin one will replace the existing kernel . Likewise firmware can be flashed via Odin .Likewise custom roms though they are often via CWM .
Read some posts in the development section is what i would start with stock roms and custom roms .
jje
irish-sid said:
So, If I follow this one [just to root] - does that mean I then can put other stuff on like kernels*? And if I decide I don't like the kernel can it be taken off? - or do I put another on top and it deletes the first?
Basically [as I'm brand new to rooting] what do I do after rooting?
Click to expand...
Click to collapse
Thats a root kernel, you flash it, it roots your phone, but apart from that it acts like stock.
You can put other kernel's ontop and they will replace it, you cant remove a kernel.
You will keep root if you change your kernel, but if you change rom you may need to reroot.
Thanks a lot for all your help. I'm rooted now, frozen bloatware and very happy.
Does anyone know if I can get the battery icon in the status bar to show its percentage? I've only seen widgets which I don't want.
Hey all,
I'm a beginner in this rooting society, moving over from jailbreak development on iOS. I am wondering how I would be able to root a Galaxy S2 with model/kernel number ZSKF4 running 2.3.3.
Not sure if this is the proper place to put this, but I've searched everywhere and no place is providing an insecure/original rom for rooting with this kernel number on the file name.
Can somebody help me?
Many thanks,
Nicholas
UPDATE: Anyone know how to root ZSKI2 running on 2.3.5?
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Read the post in regard to versions /kernel matching first .
jje
Thank for your reply.
Many guides like the one you gave me, requires kernel matching first, but really, I'm entirely lost in this matching process. Can you give me some heads up on what to choose using my specs I list below?
My Galaxy S II:
Model Number: GT-I9100
Android Version: 2.3.3
Baseband Version: I9100XXKE4
Kernel Version: 2.6.35.7-I9100ZSKF4-CL280225
Build Number: GINGERBREAD.ZSKF4
If you can help me, I will be very grateful.
Thanks a lot!
Nicholas
Instructions in the post are .
Don't worry too much, just find the matching download and use it. What if there is no matching download ? You can ask me to make one, but I can tell you right now, I very very rarely make CF-Root's for kernels on request, unless it is the very latest kernel that has been released by Samsung. In the latter case, be sure to let me know. If there's no match and I'm not making one, try finding the closest match. You should treat "KG1" as a number, but instead of 1-9, we have 1-9, A-Z (where A would be 10, and Z would be 35). "KG2" is really close to "KG1", "KF1" is not close to "KG1" at all.
You want then a KF4 kernel from post 5 .
jje
This one from post 4 should do it: CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4.zip
You have a HK/Taiwan phone? If you install Kies you should be able to upgrade to the official ZSKG2. Although that is still 2.3.3 so not much difference there.
Yes, I have a HK/Taiwan phone,
Thanks guys,
So if I have ZSKF4 right now, I'll use "CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4.zip"?
If I upgraded to the latest ZSKG2, will there be any difference comparing to ZSKF4? because you said its the same 2.3.3.
Okay, well after looking at the instructions, I got a little freaked out of how long it actually is, and was pretty worried if I do this, I would get a triangle at boot because I'm using Custom Kernel? Also I heard that many people don't want to use CF-Root because there's a higher risk of bricking comparing to SuperOneClick that I used to root my Galaxy Tab 7. So, I checked on something else.
http://forum.xda-developers.com/showthread.php?t=1125414
Thats a one click rooting app for the S2, but what is this "Flashing an Insecure Kernel" and how do I get this kernel for either ZSKF4 or ZSKG2? I prefer the most easiest way so that I wouldn't run into a huge risk of bricking this device. Thanks for all the help on CF-Root above, but would you guys happen to know what exactly is going on in this link?
http://forum.xda-developers.com/showthread.php?t=1101671
That contains all the insecure kernels for the S2 one click rooting application. Which one do I choose if I have ZSKF4 or ZSKG2?
Thank you everyone for helping me,
Nicholas
Rooting with CF-Root is very easy, just start up Odin, click the boxes like it says in the instructions, and it's done in less than a minute. You can use the other method, but if I were you I would just go with CF-Root because 1) so many people have done it and 2) at least you know one person (me) who did it on their HK/Taiwan phone and came out fine (and I was a complete root noob at the time).
I think whether you upgrade to ZSKG2 first depends on why you want to root. If you are rooting so that you can install a custom ROM, then no need to upgrade to ZSKG2. Just root your phone and install the new ROM and you're good to go.
But if you want to keep the Samsung firmware and only rooting so that you can run certain apps or do certain mods, then upgrade to ZSKG2 through Kies first, then root. There is nothing really bad about the Samsung firmware. I run Cognition 1.5.1 + SpeedMod, but it's mostly just for the fun of it. I don't do anything on it that I couldn't do with rooted 2.3.3 Samsung firmware.
And yes, you do get the bright yellow triangle at startup. There are ways to remove it, but I haven't tried. I like the triangle, it's like a little badge of honor for power users.
Yeah, I'm only rooting for just certain apps that require root/superuser requirements. Other than that, I won't put a load of mods on.
So, if I go to Kies, upgrade to ZSKG2, then I begin rooting, would I be using:
CF-Root-SGS2_ZS_OZS_KG2-v4.1-CWM4.zip
But the thing that scares me is that it says "ZS_OZS_KG2: Untested", does that mean it would be risky to do it?
Hey just noticed in the General forum that the official ZSKI2 is out - and its version 2.3.5 to boot. Check it out: http://forum.xda-developers.com/showthread.php?t=1281717
Yeah the "untested" means the author did not try it personally (can't really expect him to test every kernel from every region). I used it and it worked fine -- that's all I can really say.
Oh wow, that looks pretty cool....
I'm sure I can update to that, which I will, but, does this mean I have to wait for another rooting procedure?
I have a crazy "OCD" that I have to always stay up to date haha. So yeah, if I do this, logically if the CF-Root is able to root it, I will have to wait for a person to make the ZSKI2 kernel insecure version?
Actually, okay, when I upgrade to ZSKI2 kernel, which "CF-Root-SGS2_ZS_OZS_KG2-v4.1-CWM4.zip" do I use? I don't see a ZSKI2 kernel anywhere...and I'm assuming I can still use CF Root to root at 2.3.5?
You can use a version that is close -- in this case I think XX_OXA_KI3 is the best match. It will probably work with the ZSKI3 firmware -- but I have not tried. (Sorry I mistyped the name in my earlier post, it is ZSKI3 and not ZSKI2.) If you want to be safe then yes you will need to wait until there is a rooted ZSKI3 kernel that you can use.
If you plan to install a custom ROM, then it does not matter what kernel you use for root, since the custom ROM will generally come with its own rooted kernel and it will replace whatever you had before.
For some reason, Kies isn't letting me update.
It says: "This version of this device cannot be updated"
Do you know why this is happening?
By the way, I noticed when I plug in my phone to Kies, I see under CSC, in brackets are (KOR). What does this mean and does it affect any rooting?
UPDATE: I know what KOR means, it means it's a Korean region based device. Is there any difference to what I may be able to update to in Kies or any rooting differences?
hi to everyone, im new her (well been checking for a while since i goy my first epic but i just decided to register) i have a question that i havent been able to find out, i just got a galaxy S2, and i want to root it, first to remove al unwanted apps (belive me in mexico, Telcel charges phones with a lot of useless ****) i already read how to root it, i know about the insecure kernel and all that stuff (i have a little previous experience with Epic 4G) but here is the thing
the version on mi cel is 2.3.4 and kernel UMKG4, from what i'd understand i must install an unsecure kernel (the same as the OEM one but unsecure version) so i can root it and then get CMV, super user, etc
so i havent been able to find this kernel version, what happens if i install another kernel version? and then if i want to flash back to OEM to remove the yellow triangle at boot, will it work with another kernel version even if its not the oem one?
i thank you in advance for clearing this doubts
A different kernel version should not cause any trouble as long it's not an "ancient" one (like KE2 or KE7).
Also see that it's a kernel that comes from/for a ROM with the same Android version - 2.3.4, in your case, so XXKG3 should work fine for you.
For XXKG3 there's root kernels, stock kernel and everything else you need floating around.
Hi Guys as my title Says..
i need Help very Badly.
First of all MODS and USERS i'm sorry i didn't knew where to post this thread so if its in in-appropriate section please move it to correct section. THanks
OK my problem is this.
i recently (less than a week ago ) bought a Samsung Galaxy S2 its by Bell Canada and its i9100M. i bought it online since my service provider is Rogers.
i guess this phone is already rooted to unlock it and i can see CWM and SU icon there.
Well i'm a Hardcore Blackberry Fan and have been using Blackberries from last 6 years. I loved the new samsung because of it looks and its screen.
I Had Lot of Problem with it like setting up my yahoo as push email, setting the Ringtone Profile, setting up the Custom Ringtones for Text Messages..
Having wrong time stamps on Recieved TEXT Message.. well i fixed all those by installing apps from market and forwarding my yahoo to my gmail...
i Hated doing all that but infront of the beauty of this phone i had to compromise but today it took 3 hours to find my gps location and day by day im using it i'm hating it .....
SO OK I DID MY RESEARCH AND FOUND OUT ALOT... the more i'm researching the more i'm getting confused...
first of all what is the difference between custom ROM and KERNEL.
i know custom rom could be like operating system but customized by unofficial person.
what the h is KERNEL..
to install rom's or kernel do i really have to root.
To unlock do i have to root or is there a paying method.
also i want to know if i'll go back to stock rom can i still unlock it.and recieve all the updates from samsung or google specially when ICS will be launched.
after unlocking and installing custom root. can i unroot it
and lastly which is best custom kernel and which is the best rom availble.
since been a blackberry user i have very basic needs. i don't play any games or download much apps and if an app is paid..i'll pay for it.. i don't want to jailbreak anything .
all i need is better battery life, gps and network coverage.
Thanks for taking time to read and reply.
Hi there.
I'll try and get through your questions as simply as possible,
Imagine your phone is like a car
A kernel is like the engine of a car - it's the low level machinery that keeps it going.
The Rom is like the body of the car around the engine. Roms can be official (or Stock Roms), or they can be customised by other people.
So, when you install a stock rom - you're installing the kernel, but you're also installing the radio (called a modem or baseband) and the registration (or the CSC which is location specific information) as well as the unique 'body' of the car for that rom - tweaks, default software, etc.
You don't have to have rooted your phone to install a Rom. When you update your phone via Kies, you are, literally, installing an stock rom. You can even install stock roms from elsewhere without rooting your phone. Because stock roms are released in different regions at different times, lots of people update their phones to the latest official roms via this method - no root required.
However, to install a custom, unofficial rom, you will need to root your phone as they will require access to the 'root level directory' of your phone's file system - which is what root really means.
You can find everything you need to know about that, how to root and also lots of stock roms you can install without rooting here:
Some shops will root you phone for you if you want to go down that path and don't want to risk it. But it's easier than you think and the galaxy s2 is very hard to break. There's lots of help available on XDA - just remember to search before you ask so you don't ask a common question the millionth time.
If you have installed a custom rom you can easily re-install a stock rom over it that will still work with Kies and thus be updateable when ICS turns up.
There is no 'best' Rom or kernel. Some Roms go 'as is' and some are customisable to the nth degree if you like fiddling with your phone non-stop. I personally use CheckRom because I like the kitchen app that lets you swap kernels, modems and mods with ease - but check out the Original Android Development threads and see which other roms you like the sound of.
Depending on what you are currently running, a new rom - even a stock one if you're running a very old one - could easily help with battery and range issues. For GPS - try installing FasterFix from the market and see if reassigning your GPS fix to a closer location helps.
Best of luck - it's a great phone once you open up its possibilities
Thanks a lot for the reply
well your reply did help me a lot...
my phone is been already rooted by someone else already from the person i bought it....
as for searching i did a lot.. and its been confusing me more and more ..well thanks for your answer
also as u said S2 is hard to break..i guess u mean is that the JIG thing on EBAY
and as for flashing the stuff i've played with other stuff just not android thing ive replaced the os on BB and jailbreaked iphones and installed macintosh on HP PC and also worked on most of the languages 10 years ago... and i believe nothing is impossible so going to someone else is never an option for me
just want to know as much as stuff i can before going further
well i have few more questions
how can i find which rom or kernel is already installed...
i mean is it possible to tell if its stock or its customized and its customized by which group.
and one last thing.. u know the words u used modem and baseband...
i read about it before...
but my question is ...
IS THE BASEBAND ANYTHING LIKE IPHONE BASEBAND???
u know in iPhones when baseband is updated u r screwed sometimes its hard to jailbreak and definately hard to unlock and reverting changes to baseband....
is it the samething in Galaxy S2 as well...
Thanks a lot for replying...i really appreciate all the time you took to reply.
Thanks once again.
Yeah baseband is the code that handles the phone part of your smartphone. Talking to your wireless provider, 3G, texts all these things are done by baseband.
Flashing a different baseband won't screw your root, and you'd still be rooted. Samsung doesn't make it hard to root as Apple does to jailbreaking. Even if something goes wrong with a new version, you can always revert back to old one using Odin(Samsung ROM flashing tool) and you are good to go.
Thanks a lot... about that quick reply...
i'm gonna collect more information and hopefully i'll be flashing it on weekend...
but how can i find which rom or kernel is already installed...
i mean is it possible to tell if its stock or its customized and its customized by which group
Everything you need to know can be found here. Most of it, anyway.
Backup your device with cwm when rooted ... So you can always restore to previous state. ;-)
Good luck there. But reading is a must.
SGS II - XDA
blackberryfan said:
thanks a lot... About that quick reply...
I'm gonna collect more information and hopefully i'll be flashing it on weekend...
But how can i find which rom or kernel is already installed...
In your dialer type *#1234#
info will apear. Now read chainfire's tutorial how to root your device ....
I mean is it possible to tell if its stock or its customized and its customized by which group
Click to expand...
Click to collapse
Setting went wrong when quoting
sgs ii - xda
also you can go settings - about phone - then look at the bottom fields to see kernel, baseband and build. Quote those and we should be able to tell what you have.
Sent from my GT-I9100 using XDA App
Hi, I recently got an international Galaxy S3 - my first Android phone. It's an unlocked Spain model (not tied to any carrier), and I upgraded it from 4.0.4 to 4.1.1 as soon as I took it out of the box. I've been rooted through Chainfire's ExynosAbuse since it was released. I've never used Kies; the only update I've had was done OTA.
I wasn't planning on messing around with ROMs for quite a while, but I considered installing a 4.1.2 ROM after seeing the Premium Suite announcement. I figured I'd wait however long it took for Samsung to release 4.1.2 to Spanish phones... but reading that the XXELLA upgrade fixes the sudden death issue - something which I've been quite worried about - I kind of want to just install it, assuming there's no adverse effects. And if the eMMC bug causes damage to the chip over time, I would like to install the hotfix as quickly as possible... (I do have the affected chip and FW rev)
I have been reading up quite a bit in the GT-I9300 sections here, and I think I've got an okay picture of how stuff goes, but I do want to make sure before I do anything with my expensive phone! There is an overwhelming amount of information and it's hard to keep track of everything. Anyway, here's what I was wondering...
- What's the best and safest way to flash the 4.1.2 ROM? It seems like I can use Odin, Mobile Odin, Heimdall or a recovery... but I assume I would need to flash the latter through one of the other three? I use Linux, so I would prefer to use Heimdall over Odin (if it's not more risky). Is a recovery required for custom ROMs, or is it just for convenience? Is it safer than the other methods?
I should also mention that if I used Mobile Odin, I would have to use the lite version as paid Play apps aren't available where I live and I don't have a credit/debit card anyhow.
- Would doing this get me the same result as installing it through Kies or OTA if it was officially released for Spain? (eg. the properly updated kernel/bootloader/modem/whatever else...) Including the famous eMMC fix...
- Are there any adverse effects to installing a ROM belonging to a different country? I think I'd probably end up going for the UK version.
- Would I keep my installed apps, settings, etc like I did with the 4.1.1 OTA update?
- I may end up installing a custom kernel later on (possibly Perseus or something of the like); is there anything I should take into account for this, like what method I use to flash it? And would I lose my data through doing this?
I hope I haven't asked anything too dumb, lol. Thanks very much!
Treeki said:
- What's the best and safest way to flash the 4.1.2 ROM?
>> follow the instructions for the firmware
? I use Linux, so I would prefer to use Heimdall over Odin
Use hEIMDALL
. Is a recovery required for custom ROMs,
Yes
Is it safer than the other methods?
No
- Are there any adverse effects to installing a ROM belonging to a different country? I think I'd probably end up going for the UK version.
Possible need to flash modem or CSC for your region / network
- I may end up installing a custom kernel later on (possibly Perseus or something of the like); is there anything I should take into account for this, like what method I use to flash it?
Follow the kernels instructions .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse