my phones touch screen isn't responding i was stuck in a boot loop after factory reset but used flashtool to flash stock rom but when i rebooted screen didn't work tried reflashing but without success. how can i get it working again?
dice14 said:
my phones touch screen isn't responding i was stuck in a boot loop after factory reset but used flashtool to flash stock rom but when i rebooted screen didn't work tried reflashing but without success. how can i get it working again?
Click to expand...
Click to collapse
try to flash another stock rom (for instance an older one)
i tried but still stuck with the same problem do you have any firmware links that i could try?
Related
I tried ODIN and successfully got it back to stock rom. But the phone keeps looping back to the Vibrant logo screen. The method I used worked for me for the past three years, it started acting weird when all of a sudden an ICS custom rom from MIUI hanged on me. And then I was unable to get my phone working!
Is my phone permanently bricked?!
MiniGunnR said:
I tried ODIN and successfully got it back to stock rom. But the phone keeps looping back to the Vibrant logo screen. The method I used worked for me for the past three years, it started acting weird when all of a sudden an ICS custom rom from MIUI hanged on me. And then I was unable to get my phone working!
Is my phone permanently bricked?!
Click to expand...
Click to collapse
Can you get into recovery? Did you flash a custom gb boot loader? You wipe data and cache? You could try Odin again and flash stock with the correct pit file and re partition checked I've done this many times and have not had this problem you might just have had a corrupt flash like I've read Odin has been known to fail
Hello.
So today, I was gonna install a new rom. So the first thing I did was to use the Clockworkmod recovery app on my phone to reboot in to recoverymode, now Im stuck in a weird bootloop where it tries to enter recoverymode but fails then goes back to the samsunglogo, restarts and tries recoverymode again, and it just keeps restarting trying to get in to recoverymode.
I have tried installing another recovery but it does the same no matter what recovery I use.
I have tried removing the battery and putting it back in it still wants to boot in to recovery and it still fails.
Please help me! :/
deus- said:
Hello.
So today, I was gonna install a new rom. So the first thing I did was to use the Clockworkmod recovery app on my phone to reboot in to recoverymode, now Im stuck in a weird bootloop where it tries to enter recoverymode but fails then goes back to the samsunglogo, restarts and tries recoverymode again, and it just keeps restarting trying to get in to recoverymode.
I have tried installing another recovery but it does the same no matter what recovery I use.
I have tried removing the battery and putting it back in it still wants to boot in to recovery and it still fails.
Please help me! :/
Click to expand...
Click to collapse
If you can get into download mode flash stock rom and start again.
tallman43 said:
If you can get into download mode flash stock rom and start again.
Click to expand...
Click to collapse
Hello, after reinstalling the different recoverys a few times I finally got in to it and was able to install another rom, now my phone works.
Thank you though for trying to help!
Be careful, if it's accidently works. I recommend to flash TWRP 2.8.3 by Odin.
So my G925F got bricked recently by updating the phone to 5.1.1 UK BTU firmware (G925FXXU2BOFJ) and the phone would not boot up. It was stuck on the boot logo. I did hours of research and finally managed to get it working by flashing Unibase Kernel.
Now the problem I am facing is that I want the phone back to 100% stock. Even unrooting the phone won't work because Unibase will reinstall SuperUser during restart. If I reinstall 5.1.1 using Odin it will hang on boot logo until I flash it with a custom Kernel, in my case Unibase did the trick.
Ive also flashed the phone using Samsung SmartSwitch with original firmware it still fails to boot until its flashed thereafter with a custom Kernel (UniBase)
Ive also tried the solution of removing hidden.img from firmware then repacking and flashing it, still seems to be the same problem (hanging on boot logo) Ive also tried to hard reset phone after flashing and yet its still faces the same problem. Is there a stock Kernel or any other solution anyone may know?
All help is appreciated and I will be happy to try any solution or method posted. Cheers
flash stock firmware with odin but uncheck auto-reboot. Once its done boot into recovery, clear cache, factory reset and it should boot
Please check and try this
http://www.androidrootz.com/2015/05/how-to-unroot-galaxy-s6-and-s6-edge.html
Mine didn't boot and KNOX was touched and after i flashed a stock ROM via ODIN it was all ok. I used but a ROM from https://www.samdownloads.de/firmwares/alle-firmwares/#
polish_pat said:
flash stock firmware with odin but uncheck auto-reboot. Once its done boot into recovery, clear cache, factory reset and it should boot
Click to expand...
Click to collapse
deepphrozen said:
Please check and try this
http://www.androidrootz.com/2015/05/how-to-unroot-galaxy-s6-and-s6-edge.html
Mine didn't boot and KNOX was touched and after i flashed a stock ROM via ODIN it was all ok. I used but a ROM from https://www.samdownloads.de/firmwares/alle-firmwares/#
Click to expand...
Click to collapse
Thanks guys, Ive tried both of your solutions, unfortunately the problem still exists. The phone will hang on
"Powered by Android" boot logo until I flash it with a custom Kernel. Weird problem
Ive checked, its definitely the boot.img causing the problem. Unibase flashes modified boot.img which turns the phone on
iMoGGG said:
Thanks guys, Ive tried both of your solutions, unfortunately the problem still exists. The phone will hang on
"Powered by Android" boot logo until I flash it with a custom Kernel. Weird problem
Ive checked, its definitely the boot.img causing the problem. Unibase flashes modified boot.img which turns the phone on
Click to expand...
Click to collapse
Out of interest, why do you need to return it to 100% stock?
Hi,
I have the 925f. I was in a custom rom but had some issues in my phone (7.0 A8 port), so I decided to flash back to stock through ODIN. After flashing G925FXXU5ERA4 it was stuck almost 30 min in samsung logo. Then I went back to DL mode and tried again with the same result. I also tried flashing G925FXXU5EQFC but again it was stuck. I did this several times.
Am I lacking something? Any help will be appreciated.
Nicop.
nicopmdq said:
Hi,
I have the 925f. I was in a custom rom but had some issues in my phone (7.0 A8 port), so I decided to flash back to stock through ODIN. After flashing G925FXXU5ERA4 it was stuck almost 30 min in samsung logo. Then I went back to DL mode and tried again with the same result. I also tried flashing G925FXXU5EQFC but again it was stuck. I did this several times.
Am I lacking something? Any help will be appreciated.
Nicop.
Click to expand...
Click to collapse
If it's stuck in Samsung logo just leave it longer, the first boot can take quite a while
Thanks callumbr1!
It was almost an hour and it didn't passed the logo (I tried two stock roms through ODIN). I solved it by flashing twrp wiping system and a rom through a zip file.
nicopmdq said:
Thanks callumbr1!
It was almost an hour and it didn't passed the logo (I tried two stock roms through ODIN). I solved it by flashing twrp wiping system and a rom through a zip file.
Click to expand...
Click to collapse
anytime when u flashing new firmware via odin u need to go to recovery and factory reset the device , thats the point that odin dont do while installing and that why u cant pass trought samsung logo.
My nexus is having issues i tried rooting it it worked but i dowloaded this app called flashfire i wanted to flash something but when i tapped on flash it wiped my device and now it wont boot up it will turn on but gets stuck on the google logo which is when you first turn it on i can acces the bootloader but thats it i tried recovery by wipping everything again i think its called boot loop not sure please help.
Jean Santiago said:
My nexus is having issues i tried rooting it it worked but i dowloaded this app called flashfire i wanted to flash something but when i tapped on flash it wiped my device and now it wont boot up it will turn on but gets stuck on the google logo which is when you first turn it on i can acces the bootloader but thats it i tried recovery by wipping everything again i think its called boot loop not sure please help.
Click to expand...
Click to collapse
Re flash the stock firmware with fastboot.
Flashfire doesn't wipe anything unless you tell it to. Besides chainfire ended support and use of flashfire so don't use it.
Use fastboot to flash.
Go into fastboot and just run the flash-all.sh script and for the desired stock firmware.