after updating my dell venue to 2.3 its works fine for sometime bt after i restart the ph is not turning on.... while charging the 3 bottom keys are blinking,,,,
plzzzzzz help
shakes_aqua said:
after updating my dell venue to 2.3 its works fine for sometime bt after i restart the ph is not turning on.... while charging the 3 bottom keys are blinking,,,,
plzzzzzz help
Click to expand...
Click to collapse
Which update have you performed?
2.3.3
2.3.7 (CM7) / (MIUI)?
Try removing the battery,
Try going into recovery
Does it show you the Dell Logo?
I have tried 2.3.7 (CM7)..... The display is not showing any thing except the bottom keys are only blinking if i plug the usb and hold the Turn on switch...
Is my phone is dead???
will dell provide support from service centre..
my ph is in warranty period?????
shakes_aqua said:
I have tried 2.3.7 (CM7)..... The display is not showing any thing except the bottom keys are only blinking if i plug the usb and hold the Turn on switch...
Is my phone is dead???
will dell provide support from service centre..
my ph is in warranty period?????
Click to expand...
Click to collapse
Did you try reflashing the ROM ?
Try wipe-data in recovery menu
mine too, please help.....
My venue is currently on CM7. then I accidentally update something and it hanged up. I remove the battery and inserted again, but won't turn on..It doesn't even show the DELL logo...I tried plugging it on PC but it won't recognize, only the three touch button at the bottom is lighted up... So I cannot go to fastboot mode... anyone has a workaround with this?? help would be very much appreciated....thanks
Error....
I have a serious problem with this......after I complete my update with the given info to 2.3.7......I rebooted this it flashed the dell icon after this the DELL logo is gone and 'ANDROID' name is coming on the screen n not booting from a long time.....so please help me with this.....please.......:crying::crying::crying::crying::crying::crying::crying:
rishig said:
I have a serious problem with this......after I complete my update with the given info to 2.3.7......I rebooted this it flashed the dell icon after this the DELL logo is gone and 'ANDROID' name is coming on the screen n not booting from a long time.....so please help me with this.....please.......:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
How is it now?
Can it boot?
Seem to me !
After Root , i try go to CMW by press and hold Power+Volume+,-.....it's work and showing Flashboot Mode 2. But 3button on screen flashing and my phone shutdown...Now I can't start my phone, nothing happen when pres Power key......No power, no flashing button, no Dell logo booting....
What must i do....Please help me ! Thanks in advance!
xdavietnam said:
Seem to me !
After Root , i try go to CMW by press and hold Power+Volume+,-.....it's work and showing Flashboot Mode 2. But 3button on screen flashing and my phone shutdown...Now I can't start my phone, nothing happen when pres Power key......No power, no flashing button, no Dell logo booting....
What must i do....Please help me ! Thanks in advance!
Click to expand...
Click to collapse
try flash orther ROM 408
Related
I'm not able to boot to xrecovery after I've flashed to xCyanogen6-v3.4 on my x10 mini... Anyone can help me?
help
is there anyone hu can lend me a hand here?
If pressing back key doesn't work then you can try this.
Download X10 Flasher by Bin4ry and Androxyde
Connect your phone with pc using usb debugging mode enable
Run X10FlashTool.exe
Go Advance menu
Then xrecovery
Select reboot into xrecovery
Your phone will reboot automatically and start in xrecovery mode
it works... u really did me a big favor... thx a million...
Happy to help.
my phone are the same, aftermodify theme phone stuck on white SE, use the flash tool, dont work, the boot xrecovery is grey cant hit it...what can i do...can not seus to, please help
if flashtools is useless..
I've juz experience this problem where the flashtool is useless as *naisiju1402* said.. try use SEUS then when it asked u to connect the phone, do this..
-at the sony ericsson screen where u stucked, plug in the usb cable n then hold home+back key+power button.. it should be working..
another hint?
jeffreyKimball said:
I've juz experience this problem where the flashtool is useless as *naisiju1402* said.. try use SEUS then when it asked u to connect the phone, do this..
-at the sony ericsson screen where u stucked, plug in the usb cable n then hold home+back key+power button.. it should be working..
Click to expand...
Click to collapse
and if it doesn't work?
I tried to install MiniCM6-1.0.2. to use android 2.2
"something" went wrong during install (sorry it's a long time ago and i can't remember).
now, each time i boot the phone, it runs into android boot logo. after white Sony Ericsson logo.
with usb cable connected, the pc sounds usb dev found, than usb dev disconnected and another usb dev found.
thereafter the android logo, in cool silver with an android circling around the sign with a comet-tail.
until the circling stops and the phone didn't do anything else.
the power key doesn't do anything too, so each time I have to remove the battery.
Is there anything I could do? a special key stroke - or a pen-reset button below anything?
please help.:crying:
Rumo65 said:
and if it doesn't work?
I tried to install MiniCM6-1.0.2. to use android 2.2
"something" went wrong during install (sorry it's a long time ago and i can't remember).
now, each time i boot the phone, it runs into android boot logo. after white Sony Ericsson logo.
with usb cable connected, the pc sounds usb dev found, than usb dev disconnected and another usb dev found.
thereafter the android logo, in cool silver with an android circling around the sign with a comet-tail.
until the circling stops and the phone didn't do anything else.
the power key doesn't do anything too, so each time I have to remove the battery.
Is there anything I could do? a special key stroke - or a pen-reset button below anything?
please help.:crying:
Click to expand...
Click to collapse
Home-button (middle button at the bottom) and Power-button at the same time will give you a hard reboot.
unfortunately not
SmG67 said:
Home-button (middle button at the bottom) and Power-button at the same time will give you a hard reboot.
Click to expand...
Click to collapse
I tried this shortkey several times, different duration. but did not work.
seems to be a hang during OS boot. so, maybe no BIOS or OS shortkey could help.
Is there an option to force an factory default, or did I erase that option during Froyo install try?
thank you for your help :good:
Rumo65 said:
I tried this shortkey several times, different duration. but did not work.
seems to be a hang during OS boot. so, maybe no BIOS or OS shortkey could help.
Is there an option to force an factory default, or did I erase that option during Froyo install try?
thank you for your help :good:
Click to expand...
Click to collapse
That shortkey is a global shortkey, it even works when you get stuck on the kernel-logo (ie, if you didn't have a ROM at all), maybe there's a hardware-problem with your keys.
Help me ppl ! I screwed up big time !!
I originally got X10 mini with Android 2.1 and relatively old firmware ...anyway I rooted my phone, took the backup and then Flashed a CWM Recovery on it !
Factory WIPED all the data for the new ROM ......
Then I was about to Flash this CM 7.1 ROM when all of a sudden it displayed the message that it wont work wihout the Latest Firmware .... so from there on I had no choice but to Restore my Backup and go back to a working OS, so I could easily proceed with Firmware update ...... but that never happened !!!
The Backup couldnt be recovered ...it failed for i dont know what reason ....ever since then the device never worked beyond the WHITE Sony Ericsson LOGO !!! Im stucked ..... even the CWM Recovery isnt working now !!
I'm stucked !! I've been looking for a solution for almost 3 days now .... but had no luck !!! dont know what to do from here on!! KINDLY HELP !! plzz plzz plzzz !! I desperately need to fix this !! the device even aint mine !!!
restore to stock by using sony ericsson update service
First, don't panic
And you have to notice and make this a lesson; if CWM said that your baseband is incompatible, it means, CWM is not flashing anything to your phone, yet.. So you only have to restart the phone, instead of recovering your CWM backup, and you'll be back to your default OS
Second, now find a tool named FlashTool, and also find a 2.1 stock firmware.. now proceed to flash with USB cable, you'll find the instruction together with the tool
Third, you'll be OK, trust me
first of all moedjs man !! Thx for sympathy n giving me courage !!
but could you kindly confirm that FlashTool would still work even If I'm unable to mount USB anywhere !! coz USB would charge phone but since I'm stuck on Sony Ericsson Logo and cant go beyond that point I'm unable to update my Firmware via PC Companion tool by Sony Ericsson tooo !!!
Thats the main reason I was panicking mate !! Kindly Kindly confirm that for me !! n I'm already liking your positive attitude ..so I do trust ya !! THX again !!
i don't understand why you can't use official seus? afaik it doesn't need anything beyond the se logo. power off phone, run seus on the pc, plug the cable while pressing the back key, etc; right?
dr.norton said:
i don't understand why you can't use official seus? afaik it doesn't need anything beyond the se logo. power off phone, run seus on the pc, plug the cable while pressing the back key, etc; right?
Click to expand...
Click to collapse
Sir I've been through that .... for some reason it didnt work for me beyond "plug the cable while pressing the back key" STEP !! i dont know why !! i didnt have any effect watsoever, therefore I couldnt proceed with the 3rd STEP of Updating it ! =(
and is there anyway to Remove the battery !! coz once I use Home+Power Key combo it restarts device ...... is there any other combo to power off the phone, so I can atleast save battery !! anyway m also givin FLASHTOOL a try !!
can't power off? well, try these steps:
start seus on pc
connect phone and pc with usb cable
press both middle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
dr.norton said:
can't power off? well, try these steps:
start seus on pc
connect phone and pc with usb cable
press both middle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
Man I just tried turning on my device for the first time today !! Battery was discharged i guessed so Initially I got Red blinking LED light .... now even that its stable on Green .... !! my device isn't turning on !! not even showing that white Sony Ericsson logo now ! i dont know whats happening here !!
I'm trying to be calm but stuff like that keeps happening to me !! Kindly guide me with that !! its still green I hold power button n yet its showing no sign of turning on ! =(((
do you see charging battery in your screen? have you waited enough to boot it again and try the steps above?
still, if you need to disconnect the battery, here is a disassembling guide: http://goo.gl/jDd6q
dr.norton said:
do you see charging battery in your screen? have you waited enough to boot it again and try the steps above?
still, if you need to disconnect the battery, here is a disassembling guide: http://goo.gl/jDd6q
Click to expand...
Click to collapse
Wow thanks for that Dis-Assembling guide ..... !! I'll ultimately have to try this if everything else fails ....
well I never saw Battery charging on screen !! i think not even when it was working fine !!
I think i'll give it some more time with charging !! coz it just showed me that SE logo again .... but when I tried to restart it .... the screen didnt turn back on !!!
also when SE Logo appears it appears automatically ......dont have to turn on the device ... and then also green LED light turns off ..... Im not sure whether its still charging at that time or not !! I think NOT ! this is kinda dodgy ! what do you reckon ?
no led light, no charge, i think. have you tried triple keys way again? it's kind of tricky, do it carefully.
Yeah I did !! I pressed HOME+Back at the same time and then had to Hold the Home button to turn the screen off ! then I repeatedly kept pressing the BACK button!
actually from there on it started blinking that RED Led light again .... ! I think its still needs more charging .... but then again If it charges enough to power the screen on automatically ..... the Green LED disappears .... so M kinda stuck in the loop here !
Oh God Help me !!
devilzeye793 said:
I pressed HOME+Back at the same time and then had to Hold the Home button to turn the screen off ! then I repeatedly kept pressing the BACK button!
Click to expand...
Click to collapse
it sounds not right pal
but by:
Middle Key : u meant HOME
Right Key : u meant BACK
isn't it ??
devilzeye793 said:
but by:
Middle Key : u meant HOME
Right Key : u meant BACK
isn't it ??
Click to expand...
Click to collapse
yes, but there's power key too. and there's no repeating but holding the back key constantly.
dr.norton said:
yes, but there's power key too. and there's no repeating but holding the back key constantly.
Click to expand...
Click to collapse
I did try this method ....it has no effect ..!! it keeps on waking screen on !! and sony ericsson logo doesnt go away !!
NEITHER is FLASHTOOL working for me !! =(
a. Unplug your USB cable from PC
b. Power off your phone
c. Press back button and keep your finger on button
d. Plug USB cable to PC
e. Check if the green LED appear
f. On popup message press "OK" button
That OK Button never appears for me !! I dont knw wat to do next
Kindly help !!!!
i think flashtool needs a working system.
can you power off your phone or not? if able to do so, seus should work.
so, you have just one option if you can't start recovery: using seus.
and you've two options to start seus: the standart way, or the triple buttons way.
if you can enter recovery, you can try to wipe everything and flash a rom.
these are all i can say about it. hope you can solve it.
dr.norton said:
i think flashtool needs a working system.
can you power off your phone or not? if able to do so, seus should work.
so, you have just one option if you can't start recovery: using seus.
and you've two options to start seus: the standart way, or the triple buttons way.
if you can enter recovery, you can try to wipe everything and flash a rom.
these are all i can say about it. hope you can solve it.
Click to expand...
Click to collapse
When charged enough there's no way to turn the device off ! I've tried both HOME+POWER & HOME+BACK then POWER (holding the back Key towards the end) button none of them actually works ! The Screen keeps powering back on, showing up that Sony Ericsson Logo !
Could it be USB Bricked or something ? (Apparently, since I cant access recovery I cant mount the device)
Try:
- turn off phone
- wait for 1 minute, phone still off
- connect to usb with flashtool
I have almost the same problem, my phone have been breaked several times but every time i had access to xrec or internet to solve problem.But this time when phone dischared for first time n I wanted to start it again I found that it's not gonna boot! Stuck on SE text logo... (I flashed CM7)
now it's charged ( although the screen was on, showing SE) n I have flasher n a rom.
but when i start to flash after showing "start Falshing" on screen (CMD) some seconds pass n CMD shows "write failed" n other things...
When i connect my phone to pc red LED shows itself for some seconds n after it disconnects itself while i'm pressing the back key...
And two questions:
1. Does it matter what the name of the ROM file -in firmware folder- is?...
2. I have to ftf files. on is about 108 MB n the other one 280 MB. Eachone can be a ROM?(I have tested Flasher with both of them.)
tnx
hi, i got my 1st android phone(Dell xcd 35,Android 2.2) yesterday, n it has stopped working. i suspect a software i installed. now on booting the DELL logo with sound comes and screen freezes after that. I tried(Vol up+ Power) but screen shows FTM . nothing after that.unable to connect with laptop also.
What should i do??? help please..
No battery?
Accidentally sent from my Google Nexus S using XDA Premium
virgo0669 said:
hi, i got my 1st android phone(Dell xcd 35,Android 2.2) yesterday, n it has stopped working. i suspect a software i installed. now on booting the DELL logo with sound comes and screen freezes after that. I tried(Vol up+ Power) but screen shows FTM . nothing after that.unable to connect with laptop also.
What should i do??? help please..
Click to expand...
Click to collapse
insert your sdcard into a sdcard adapter and download a new recovery.Flash it and reset your phone
I've rooted my phone and flashed CWM but never succeed to get into CWM mode to flash some mods. Method with holding VOL UP and conecting USB cable in the same time didnt work for me. Today I connected my Xperia S via HDMI cable to my LCD TV and after few minutes of playing with that I disconnected it. My phone's display freezes and nothing was happening after I try to push all the buttons and capacitive keys. Suddenly phone reboots by him self with Sony logo on screen and then CWM recovery menu appeard. How? Beats me! I didnt try again but its weird. Did someone had the similar situation?
bpodnar said:
I've rooted my phone and flashed CWM but never succeed to get into CWM mode to flash some mods. Method with holding VOL UP and conecting USB cable in the same time didnt work for me. Today I connected my Xperia S via HDMI cable to my LCD TV and after few minutes of playing with that I disconnected it. My phone's display freezes and nothing was happening after I try to push all the buttons and capacitive keys. Suddenly phone reboots by him self with Sony logo on screen and then CWM recovery menu appeard. How? Beats me! I didnt try again but its weird. Did someone had the similar situation?
Click to expand...
Click to collapse
Hit the volume up key when the LED flashes.
K900 said:
Hit the volume up key when the LED flashes.
Click to expand...
Click to collapse
Well I try that but no luck.
Keep touching the screen when the Sony logo appears.
Felimenta97 said:
Keep touching the screen when the Sony logo appears.
Click to expand...
Click to collapse
Woo-hoo, I've made it finally. Manny thanx!
Hi everyone,
I am writing in order to find a helping hint to rescue my Motorola Razr XT910...
I was just trying to install another ROM via BMM, wiped everything, tried to reboot to BMM again because I inserted a SD card...
Now it does not reboot anymore and does not show the BMM boot animation!
It shows the regular, red Motorola logo, and then nothing.. black..
What did I do wrong, or what can I do to revive it??? Is there any windows one click installer/tool/recovery program??
I have been using BMM for a while now and this never happened... I installed many roms but now it seems as if it is broken.
I would be so happy to get some hints. I haven't found some similar posts for this problem.
ejay
ejaybass said:
Hi everyone,
I am writing in order to find a helping hint to rescue my Motorola Razr XT910...
I was just trying to install another ROM via BMM, wiped everything, tried to reboot to BMM again because I inserted a SD card...
Now it does not reboot anymore and does not show the BMM boot animation!
It shows the regular, red Motorola logo, and then nothing.. black..
What did I do wrong, or what can I do to revive it??? Is there any windows one click installer/tool/recovery program??
I have been using BMM for a while now and this never happened... I installed many roms but now it seems as if it is broken.
I would be so happy to get some hints. I haven't found some similar posts for this problem.
ejay
Click to expand...
Click to collapse
there isn't a script tool for the xt910 because there are too many firmwares. The motorola logo means your bootloader is there, the black screen after means there isn't a ROM for it to boot up. It is curious that BMM hijack isn't showing up though. Have you taken the sd card out and tried booting it up again?
Anyways make sure you can get into stock recovery, if so, find the correct firmware for your xt910 (it is region specific.)
reinstall it with RSD lite(make sure you have plenty of battery.) Reroot, Reinstall BMM and restore your backup.
Draxin said:
there isn't a script tool for the xt910 because there are too many firmwares. The motorola logo means your bootloader is there, the black screen after means there isn't a ROM for it to boot up. It is curious that BMM hijack isn't showing up though. Have you taken the sd card out and tried booting it up again?
Anyways make sure you can get into stock recovery, if so, find the correct firmware for your xt910 (it is region specific.)
reinstall it with RSD lite(make sure you have plenty of battery.) Reroot, Reinstall BMM and restore your backup.
Click to expand...
Click to collapse
Thanks for your quick reply!
Right now I cannot get into ANY menu or something, I can press any button I want. After the "logo" it stays black. The phone also might not even be able to be connected to my computer. At least Microsoft Windows doesn't even show a new device when I connect it via USB, regardless if I have the correct drivers...
I dont know what to do... RSD didnt help me either. It wont find the phone...
ejaybass said:
Thanks for your quick reply!
Right now I cannot get into ANY menu or something, I can press any button I want. After the "logo" it stays black. The phone also might not even be able to be connected to my computer. At least Microsoft Windows doesn't even show a new device when I connect it via USB, regardless if I have the correct drivers...
I dont know what to do... RSD didnt help me either. It wont find the phone...
Click to expand...
Click to collapse
What logo?There is no logo in recovery...
Press vol-,vol+ and power button at the same time to get into recovery,select the option AP Fastboot and then you connect it via usb.
Sent from my Razr XT910
welder73 said:
What logo?There is no logo in recovery...
Press vol-,vol+ and power button at the same time to get into recovery,select the option AP Fastboot and then you connect it via usb.
Sent from my Razr XT910
Click to expand...
Click to collapse
Well, whenever you turn on your Razr, there is an initial red Motorola Logo. After that you usually touch the screen to boot into BMM (in case the green boot loader appears).
BUT... (of course I tried the VOL+ Vol- und Power button move) after rebooting it only shows the red Motorola Logo and then nothing but black.
ejaybass said:
Well, whenever you turn on your Razr, there is an initial red Motorola Logo. After that you usually touch the screen to boot into BMM (in case the green boot loader appears).
BUT... (of course I tried the VOL+ Vol- und Power button move) after rebooting it only shows the red Motorola Logo and then nothing but black.
Click to expand...
Click to collapse
I know there is a logo when you turn on the phone normally but you should turn it off and then turn it on with those three buttons,it must boot into recovery...
Sent from my Razr XT910
welder73 said:
I know there is a logo when you turn on the phone normally but you should turn it off and then turn it on with those three buttons,it must boot into recovery...
Sent from my Razr XT910
Click to expand...
Click to collapse
I have been trying this with these three buttons million times now. Until so far it always worked.. but now nothing happens anymore...
ejaybass said:
I have been trying this with these three buttons million times now. Until so far it always worked.. but now nothing happens anymore...
Click to expand...
Click to collapse
How long are you holding them down.. it can take a good twenty-thirty seconds sometimes. Mine is also finicky if I don't press them all down at the exact same time, it wont let me in then either.
If your getting the boot logo it is just really hard to believe you dont have stock recovery... can the device charge? If you hook it to a computer do you get the white led?
While it is Flashing M LOGO.... just keep the VOLUME DOWN AND POWER KEY Pressed...till it Flashes and Shutsdown....and immediately let go the Buttons and Immediately Again press Both the buttons... VOL DOWN+POWER Key
when you get to the FASTBOOT mode
you can follow this video
https://www.youtube.com/watch?v=LA8og7sbtBY
To unbrick your phone...Don't worry... its not broke
hrishi21007 said:
While it is Flashing M LOGO.... just keep the VOLUME DOWN AND POWER KEY Pressed...till it Flashes and Shutsdown....and immediately let go the Buttons and Immediately Again press Both the buttons... VOL DOWN+POWER Key
when you get to the FASTBOOT mode
you can follow this video
To unbrick your phone...Don't worry... its not broke
Click to expand...
Click to collapse
Thanks a lot for your reply! This video gave me hope I will try this as soon as I can...
ejaybass said:
Thanks a lot for your reply! This video gave me hope I will try this as soon as I can...
Click to expand...
Click to collapse
Now I am facing an issue that's really annoying. I can get into recovery (AP Fastboot) if the phone is connected to a power source. As soon as I unplug it, the screen turns black! When I connect the phone to my computer, the LED goes white and I cannot access AP Fastboot....
When no cable is connected to the phone I cannot access any recovery mode.
What is wrong here? Even if I connect the phone to the power source only, it shows the red Motorola logo all the time. It seems as if I cannot turn it off. Is there also a trick how to really turn it off and let the phone charge??