Hi Everyone,
This is my wife's phone, so i'm not very familar with it. She handed it to me today saying to won't boot. If connected to a charger, the screen would come on saying "RDS protocol starting..." and "Battery too low to flash".
After doing a little research her, I asked her if it had asked to do an update. She said yes, but that she's been hitting "no". So i guess it's been asking her for a while. I'm assuming she either hit yes, or it went ahead and did a force install anyway.
I took it to Sprint and they told me there was nothing they could do but replace it, which they have ordered the replacement, but that they cannot recovery anything from the internal memory (pictures, contacts, etc). So all I need to do is get the phone working enough to get data off of it, if at all possible.
The phone has NEVER been rooted. The bootloader is NOT unlocked. She's never let me touch it before.
I have no idea what version it was on (think it was 2.3.4) nor what version the OTA was trying to install.
I recharged the battery a little using a usb cable with the end cutoff and attached the red/black wires to the +/- pins. (about 30 mins or so). The "Battery too low to flash' message is gone and the phone is recognized in RDS Lite (good sign I hope).
Can I just flash "1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.zip" to it using RDS Lite? Or should I use a later version like 198_7? I downloaded the 154_5 from http://forum.xda-developers.com/showpost.php?p=20331570&postcount=3)
I eagerly await a helping hand.
Thanks,
EB
Hmm, it varies.
I will try to help you, when I will get some more time today.
peetr_ said:
Hmm, it varies.
I will try to help you, when I will get some more time today.
Click to expand...
Click to collapse
Thanks.. looking forward to hearing from you. All I really need is to be able to get pictures and contacts off of it.. and perhaps SMS history. I don't care if any of the services work, since Sprint is sending us a replacement phone.
Euclid's Brother said:
Thanks.. looking forward to hearing from you. All I really need is to be able to get pictures and contacts off of it.. and perhaps SMS history. I don't care if any of the services work, since Sprint is sending us a replacement phone.
Click to expand...
Click to collapse
I thought I remembered seeing somewhere where there is a way to block this update from installing
but i cant find it ( i tried lol)
can you or someone please tell me how to do it
i keep hitting later but ive read that at some point it can just download and install anyways and i really dont want that
thanx
Modo-mopho said:
I thought I remembered seeing somewhere where there is a way to block this update from installing
but i cant find it ( i tried lol)
can you or someone please tell me how to do it
i keep hitting later but ive read that at some point it can just download and install anyways and i really dont want that
thanx
Click to expand...
Click to collapse
Contacts are synced to googles servers, so that's not a problem. As far as pictures, were they on the sd card or internal phone storage? If on sdcard, just put the card in a card reader on a laptop or pc. Or you may be able to install bootstrap recovery and mount either internal or sdcard. Or, if you were on 2.3.4, flashing any of those sbfs will work.
You can block the update by changing a line in the buildprop. But that would require being rooted. Id sbf then do the update immediately after since she obviously doesn't care about root or unlock.
Thanks.. I'm sure the pictures are on the internal sdcard. It's the pictures taken by the camera over the past few months. I already have older ones copied to my PC.
peetr_ sent me a custom sbf for an unlocked bootloader + twrp. I'll try that when I get home to see if i can get into that way. (Thanks peetr_)
I'll keep everyone posted.
What line in the build.prop file do I change?
Sent from my MB855 using xda app-developers app
Modo-mopho said:
What line in the build.prop file do I change?
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Can't remember ill try to find out for ya.
HUGE thanks to peetr_ for all the help he gave me. I managed to get it booted into Electrify and saved everything I needed. *whew*
I now believe the whole issue was not a failed update, but a sticky volume button that's causing it to go to RSD mode. Whenever I power it down, then backup, it always goes direct to RSD mode. But then I can pull the battery, put it back in.. then hit the non-volume side of the phone against the heel of my hand (fairly hard) 5 or 6 times, then power it on, and it boots normally. Then while it's running, I'll see the volumne adjust up and down randomly.
Then if i reboot it, it's back to the RSD mode.
It doesn't work every time, but I've managed to boot it several times like that.
Related
Hello All,
I am getting the above error message after a power cycle on my Atrix. It is on the 2.2.2 Android with the latest updated without any special MOD's other than the fact that it was rooted and had a custom APN ...
So after a battery pull (I had to check the back of the phone) then I get modem did not power up (0) message and the phone waits for RSD ...
I downloaded the OLYFR_U4_1.5.2_SIGNED and tried to flash the sbf using the RSDLite it processed without any error, but after the reboot I still get the same message.
Any thoughts or words of advise?!
HoSsEiN
hgn842001 said:
Hello All,
I am getting the above error message after a power cycle on my Atrix. It is on the 2.2.2 Android with the latest updated without any special MOD's other than the fact that it was rooted and had a custom APN ...
So after a battery pull (I had to check the back of the phone) then I get modem did not power up (0) message and the phone waits for RSD ...
I downloaded the OLYFR_U4_1.5.2_SIGNED and tried to flash the sbf using the RSDLite it processed without any error, but after the reboot I still get the same message.
Any thoughts or words of advise?!
HoSsEiN
Click to expand...
Click to collapse
I bought an Atrix off of Craigslist that said it had water damage and it's doing the Same thing.. I've managed to Unlock the bootloader and install CWM, going to see if i can flash a rom to it... I'm new to Moto's so i'm struggling a bit
I'll let you know if i figure anything out..
Suggestions are welcome from all
Edit*
So i've tried flashing a ROM
I've flashed the gingerbread via this method and I got zero errors, but when the phone boots up it still says
Modem did not power up (0)
Starting RSD protocol support
I have no idea what to try next..
Anyone?
well, i've got it to boot up by holding down the volume when powering on and going to the:
BP HW Diag & Boot AP
Baseband is blank so it definitely needs a radio flashed to it.. Which i tried and it didn't work since it won't boot up correctly.. I've got a SDcard ordered going to wait till then to try some more..
I'm guessing the radio is actually damaged and nothing you can flash will fix it because it is a physical problem. I'd say you turn it in for warranty.
BravoMotorola said:
I'm guessing the radio is actually damaged and nothing you can flash will fix it because it is a physical problem. I'd say you turn it in for warranty.
Click to expand...
Click to collapse
hmm.. wish i would have thought about that before unlocking the bootloader.. Also i bought mine off of craigslist and it was water damaged..
So if i can't fix it i guess i'll just have to sell it to someone else that wants to do something with it...
I actually bought 2 off craigslist yesterday, luckily the other one is in perfect condition, just did the OTA to gingerbread
Looking forward to seeing cm7 available for the Atrix
I can't say i've had the water damage problem, however my phone used to do this all the time. My issue was i was using a micro sim card (i cut it myself), and if the sim card slid it would give me that error message.
elijahblake said:
hmm.. wish i would have thought about that before unlocking the bootloader.. Also i bought mine off of craigslist and it was water damaged..
So if i can't fix it i guess i'll just have to sell it to someone else that wants to do something with it...
I actually bought 2 off craigslist yesterday, luckily the other one is in perfect condition, just did the OTA to gingerbread
Looking forward to seeing cm7 available for the Atrix
Click to expand...
Click to collapse
Hmm, isn't there something like to where Motorola will repair outside of warranty but it just costs money?
BravoMotorola said:
Hmm, isn't there something like to where Motorola will repair outside of warranty but it just costs money?
Click to expand...
Click to collapse
that would be VERY nice to know... i could deal with that.. should be able to still recoup what i have in it and "maybe" make a few $'s..
as far as the SIM.. i pulled mine out of my inspire 4G and it's the same error. So it's definitely not that in this case.. wish it was that easy though
I also started having this problem and I'm getting very worried.
EDIT: Now it says 'battery is too low to flash' and it is plugged into mains! I can't even charge my phone anymore!?
PLEASE HELP!!
Have you flashed anything prior to this? What I mean is what did you flash before you got this error? And did you flash on a low battery?
Sent from my MB860 using xda premium
903tex said:
Have you flashed anything prior to this? What I mean is what did you flash before you got this error? And did you flash on a low battery?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I never used to get this before but after I flashed CM7, I started getting this error.
Last time I got this error, I simple plugged my phone into mains and it started charging. After that, it booted.
But now, nothing works. My phone doesn't even charge if its plugged in and I even tried using my dads battery but I still get the error.
Shall I flash a different radio? Or shall I go back to Blur-based Roms?
I was just wondering if anybody has fixed the "modem did not power up (0)" problem?
Thanks!
*Bump*
I have a Photon, but I'm getting the same error, right after I flashed the SBF for my phone. Removing the SIM card got it to boot, but I haven't tried putting it back in yet. I know the Atrix actually requires the SIM card, unlike the Photon (Sprint CDMA phone but global capable) but I would try booting without it, and then sticking it back in and booting again.
mikerotchitches said:
I was just wondering if anybody has fixed the "modem did not power up (0)" problem?
Thanks!
Click to expand...
Click to collapse
I'm wondering as well.. Plagued with this problem and 250 for warranty.
If u go in Q&A section, there's already an answer.
And The answer is to get it in warranty :v
There isn't a fix, that's a hardware issue
I have found if you hold volume down when booting and change to "Boot (No BP)", no SIM is required to utilize the operating system. (obviously you cant make calls though)
Modem sometimes powers up.
My phone is finicky with it. Sometimes it says modem did not power up, and then other times it doesn't. This might seem weird but when I squeeze the bottom of my phone it will start working and does NOT give me the message. But it freezes from the problem it has been having.
I have unlocked and rooted my phone, it has been a long time before the message showed up. Does Motorola know about this happening to their phones? And does anyone know if people would want to but the phone on craigslist or ebay or something?
I just get this problem too.. any fix for this at the moment?
raunamaxtor said:
I just get this problem too.. any fix for this at the moment?
Click to expand...
Click to collapse
Hardware issue. There is no fix , only if u know how to replace parts in the phone or want to send it to warranty.
now it can be fixed.. here is the solutions
put your battery in your phone, and plug it into the charger.
When the Motorola logo appears, hold the Volume Down button and boot options will appear.
Hit the volume down button until you see "Boot Android (No BP)". Press the Volume Up button. It will say "Cold Booting Linux..."
Screen will reset, and you'll see your battery begin to charge.
I know someone will eventually tell me to do a search, but I have and can't make any sense of most of the so called guides. What I have been finding is for the international version, or some generic crap that don't really help me. My phone is stuck on the Samsung logo when you try and power it on. I really need to fix this!!! I did SIM unlock it, rooted it, and installed OnlyOne ICS because I got tired of waiting for slow a$$ ATT to get the ICS update out. Anyhow, the phone worked great for 2 months and now this morning it kept saying, blah blah has crashed, etc. So I rebooted the phone and lord behold, the stupid thing won't work anymore. The only thing I can do with it is hold the power button and down volume button to get to the "Odin Mode". Other then that, the phone is useless. I would love to find some guide that is more specific on fixing this problem? Maybe I over looked one, but I am at work and don't have the time to search thru hundreds of threads, etc. I will when I get home, but really need to fix the phone ASAP since I use it for work too. Any info would be awesome.
I think your talking about Download mode.
http://forum.xda-developers.com/showthread.php?p=2725944
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
kcraptor82 said:
I know someone will eventually tell me to do a search, but I have and can't make any sense of most of the so called guides. What I have been finding is for the international version, or some generic crap that don't really help me. My phone is stuck on the Samsung logo when you try and power it on. I really need to fix this!!! I did SIM unlock it, rooted it, and installed OnlyOne ICS because I got tired of waiting for slow a$$ ATT to get the ICS update out. Anyhow, the phone worked great for 2 months and now this morning it kept saying, blah blah has crashed, etc. So I rebooted the phone and lord behold, the stupid thing won't work anymore. The only thing I can do with it is hold the power button and down volume button to get to the "Odin Mode". Other then that, the phone is useless. I would love to find some guide that is more specific on fixing this problem? Maybe I over looked one, but I am at work and don't have the time to search thru hundreds of threads, etc. I will when I get home, but really need to fix the phone ASAP since I use it for work too. Any info would be awesome.
Click to expand...
Click to collapse
If you can get into download mode (odin mode) just flash the attstock Rom to unroot.
Go to rootgalaxynote.com and click the upper right hand corner where it says uroot and follow the directions. Works great for me used it multiple times.
Sent from my SAMSUNG-SGH-I717 using xda premium
I do appreciate the quick responses, but I'm about to head out and will try to re-flash it later. I am just concerned about the data / pictures, etc I have on the phone itself. I know I can pull the 16gb sd card I have and it will be safe, but if I use the ODIN way to re-flash to stock, will it erase all my content I have? I thank god I have a MyTouch 4g as a backup, but all my work related stuff is on my Note, so I am really up a creek right now without it.
kcraptor82 said:
I do appreciate the quick responses, but I'm about to head out and will try to re-flash it later. I am just concerned about the data / pictures, etc I have on the phone itself. I know I can pull the 16gb sd card I have and it will be safe, but if I use the ODIN way to re-flash to stock, will it erase all my content I have? I thank god I have a MyTouch 4g as a backup, but all my work related stuff is on my Note, so I am really up a creek right now without it.
Click to expand...
Click to collapse
If you unroot all of the data stays on your note. No worries. Good luck
Just one thing, when you unroot and it is finished the att logo will come up with the "rethink possible" after that just go into Samsung recovery and reboot from there.
It doesn't say that on the website.
Sent from my SAMSUNG-SGH-I717 using xda premium
I got it to work when I got some time. I used a Wi-Fi connection at MacDonalds and downloaded the onlyone beta 5 rom. Thank god I had my laptop with me also. I was on beta 4 but I also got into clockwork mod and fixed permissions & cleared cache. Then went and flashed the new rom, hoping my data and installed apps would still work. Well my phone is working great again. Thanks for the info and keep up the good work!
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Can you put solved in the title please? : )
And quite happy for your success.
Alright So I bought this Atrix for 50 bucks. Guy was having problems and coulnt figure it out. Its rooted and unlocked. When I plug the charger into it (the stock wall charger. not to the computer) it goes to the M boot screen. I can't get to any other screen to come up. When I hold the volume buttons down, I get "Cant start RSD Battery too low to flash". also, When I plug it in, The green LED lights up for a second then turns off as it goes to the Motorola screen. I can't turn it on either with just the battery. any Ideas?
crazydavy said:
Alright So I bought this Atrix for 50 bucks. Guy was having problems and coulnt figure it out. Its rooted and unlocked. When I plug the charger into it (the stock wall charger. not to the computer) it goes to the M boot screen. I can't get to any other screen to come up. When I hold the volume buttons down, I get "Cant start RSD Battery too low to flash". also, When I plug it in, The green LED lights up for a second then turns off as it goes to the Motorola screen. I can't turn it on either with just the battery. any Ideas?
Click to expand...
Click to collapse
I had this problem just last night. I searched around xda and the internet, and came upon this: http://www.atrixforums.com/forum/mo...e-rsd-lite-flash-sbf-file-motorola-atrix.html
Give it a shot. If it doesn't turn on now, what's the worse that'll happen by trying this?
Just charge the battery and flash a SBF with RSDLite.
Make sure that you don't downgrade the ROM. Read sticky for more info about hardbricking risks.
Wrong section.
Sent from my MB860 using Tapatalk 2
What SBF file do I need? Im not sure what is on the phone and I dont wanna Brick it if I can avoid it.
Go the latest SBF(the latest being 2.3.6/4.5.141 if you have an ATT atrix. Otherwise a full list of SBF files are here http://www.filefactory.com/f/89f588286a560e39/ ). Bricking occured when downgrading, so long as you upgrade or stay the same you should be fine.
rkkaranrk said:
Wrong section.
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, admin?
I bit the bullet and did it. All was going good till my cat jumped on my computer desk and then failed saying something about switching to BP or something along those lines. Now I cant get the phone is RSD again
Was your battery charged enough? Sometimes if your battery is low it won't complete the flash.
What directory is your sbf file located at? Sometimes it won't work unless you put it directly in the C:\ drive.
Have you got the latest RSDlite?
What SBF did you flash?
Did you use the usb ports at the back of the pc?
If you can't get it in RSD again then I suggest giving it a charge for an hour or so and trying again later. Also check the md5 of the sbf file to check that the file is correct. Sometimes the 'Switch phone to BP Pass through mode' can be fixed just from trying a different usb port or computer.
crazydavy said:
I bit the bullet and did it. All was going good till my cat jumped on my computer desk and then failed saying something about switching to BP or something along those lines. Now I cant get the phone is RSD again
Click to expand...
Click to collapse
congratulations your mobile device is sucessfully bricked.
mine did[(do)will] the same, you have to take it to the assistance, i know what must be done, the assistance guys told me, but it can only be done by them.
so, you better hope you dont have the same problem as mine. [but if you got the error talking about didnt booting radio////failed to switch to BP(or some s**t like that) you probably have it, and only motorola can fix it.]
Edit: we know is the wrong section but only modetators can complain/report/warn. if we are not, lets just help the poor dude while the problem is unsolved.
guidoido004 said:
congratulations your mobile device is sucessfully bricked.
mine did[(do)will] the same, you have to take it to the assistance, i know what must be done, the assistance guys told me, but it can only be done by them.
so, you better hope you dont have the same problem as mine. [but if you got the error talking about didnt booting radio////failed to switch to BP(or some s**t like that) you probably have it, and only motorola can fix it.]
Edit: we know is the wrong section but only modetators can complain/report/warn. if we are not, lets just help the poor dude while the problem is unsolved.
Click to expand...
Click to collapse
Have you googled the error? If you have, you'd find that it is a common error and I haven't seen any cases where they didn't eventually get fixed. OP just needs to get back in to RSD and have another go. The guys from 'assistance' don't know what they're doing, they'll take any reason to say that 'only motorola can fix it' because they don't know any better.
devize said:
Have you googled the error? If you have, you'd find that it is a common error and I haven't seen any cases where they didn't eventually get fixed. OP just needs to get back in to RSD and have another go. The guys from 'assistance' don't know what they're doing, they'll take any reason to say that 'only motorola can fix it' because they don't know any better.
Click to expand...
Click to collapse
I wold haVE GOOGLED IT BUT RSD lite closed on me. I would get back into RSD but I can't get the phone back into it. I power on and hold the volume buttons and it doesnt do anything.
And also now while its stuck on the Motorola boot screen, Unlocked is missing from the corner like it use to be there.
Well after just fidiling around with it, it just started working. After about 45 minutes of just sitting there on the motorola screen, it booted up. Now its time to set it up all the way and put CM7 on it im guess.
I wasn't talking to you about googling the error, I was talking to the guy who had said that your phone was bricked when clearly it wasn't. The error would have been a fail at 'Switching Device to BP Pass Through' stage which does not mean you're device is bricked.
Anyway, good to see you fixed it. And the unlocked text goes away when you flash an SBF, that's normal. Get cm10 on it
I went back through and kind of got that after the fact haha. Im glad I got it fixed also too. Not I can get rid of the dreaded Iphone 4 :\ and be back where I belong. Is there a stable CM10 for it? I havent gotten to look around much yet since I was fixing the main problem.
using fat fingers. I have been avoiding update by hitting LATER since update 1st offered, to keep my options open. I saw a white box with the android guy standing by while it was either unpacking or downloading, so I pulled the battery. Every time I put battery in it goes back to the start of unpacking box.. I believe the phone is completely stock, no roms,mods, etc. I bought it used about a year ago, and am happy with stock so far. It was supposedly factory reset by previous owner. 1st question: Is there another failsafe point after the unpack where I can choose NOT to install update? (that would be so easy, right?) If not, what else can I do to avid update.I am a complete NEWB, but follow detailed directions well. THANK YOU ANYONE AND EVERYONE in advance for any assistance you can provide. Two other pieces of info. 1) Sprint Photon. 2) I have taken it offline so it is not active on network at this moment. Issue occurred last night.
sleepyhollowtoo said:
using fat fingers. I have been avoiding update by hitting LATER since update 1st offered, to keep my options open. I saw a white box with the android guy standing by while it was either unpacking or downloading, so I pulled the battery. Every time I put battery in it goes back to the start of unpacking box.. I believe the phone is completely stock, no roms,mods, etc. I bought it used about a year ago, and am happy with stock so far. It was supposedly factory reset by previous owner. 1st question: Is there another failsafe point after the unpack where I can choose NOT to install update? (that would be so easy, right?) If not, what else can I do to avid update.I am a complete NEWB, but follow detailed directions well. THANK YOU ANYONE AND EVERYONE in advance for any assistance you can provide. Two other pieces of info. 1) Sprint Photon. 2) I have taken it offline so it is not active on network at this moment. Issue occurred last night.
Click to expand...
Click to collapse
I think youre stuck with the install
Sent from my MB855 using xda app-developers app
It will boot to "Starting RSD protocol support" on top of screen w/no unpack or further change if I volume up/power button. Still screwed?
sleepyhollowtoo said:
It will boot to "Starting RSD protocol support" on top of screen w/no unpack or further change if I volume up/power button. Still screwed?
Click to expand...
Click to collapse
Try flashing a sbf file that may help
Sent from my MB855 using xda app-developers app
try rsd flashing the 2.3.4 sbf and hope that the bootloader hasn't been upgraded yet. that's all i can think of.
Thanks all for your replies. Being a complete noob at this, can someone point me at a file location and detailed flashing instuctions? I would be
MOST greatful.
I have been doing HOURS of reading here on XDA. Now find I can boot into FASTBOOT mode with all of the various sub menus.What if anything next to try? What is FASTBOOT? a service mode? Is there a recovery/restore built into this thing? If so, I may still have some data available that everyone seemed to be looking for some months ago.....2.3.4 stock and unlocked. TIA
Have you tried a factory reset in the menus.
———
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
rbeavers said:
Have you tried a factory reset in the menus.
———
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
Click to expand...
Click to collapse
Confessions of a TRUE NOOBand a chuckle/or sob) from you all. Yesterday, in frustration, I called Sprint, asking for tech support level2. Didn't get there, but level one did check with lvl2, who said, "stores should have ALL versions of software for reinstall" Lvl 1 checks with a large trusted Sprint repair store directly, who says "YEAH we have software" I race over, a half hour before closing. They look at phone. Tried a bunch of things. NO JOY. We only have the software on the server to down load, that MOTO sends Sprint. Current only. 2.3.5 ONLY! SQUARE ONE.
To answer your question, yes, I and others have tried to run factory reset, but it appears to be unpacking the new software as described above, so it has been aborted by pulling battery.
I am ALMOST resigned to 2.3.5 so I can get my phone back. I don't have the time, mental energy, or maybe the smarts some of the you folks do, I live vicariously thru what I read about. Note my join date. Been here since Sprint MM-9000/original Touch/TP2. I'll hang out for a while to see if any miracle ideas appear, and thanks to all.:fingers-crossed:
http://www.youtube.com/watch?v=J94VcWk-CJc
You are welcome, full youtube tutorial.
dwegiel said:
http://www.youtube.com/watch?v=J94VcWk-CJc
You are welcome, full youtube tutorial.[/QUOTE
Thank you for the link, I skimmed it, will watch a couple more times, take notes, assemble all the parts, and give it a try. It may be what I was looking for, I'll report back in a couple days
Click to expand...
Click to collapse
sleepyhollowtoo said:
dwegiel said:
http://www.youtube.com/watch?v=J94VcWk-CJc
You are welcome, full youtube tutorial.[/QUOTE
Thank you for the link, I skimmed it, will watch a couple more times, take notes, assemble all the parts, and give it a try. It may be what I was looking for, I'll report back in a couple days
Click to expand...
Click to collapse
It should work, the bootloader does not lock until the installation is near complete (if I'm not mistaken).
Click to expand...
Click to collapse
sleepyhollowtoo said:
dwegiel said:
http://www.youtube.com/watch?v=J94VcWk-CJc
You are welcome, full youtube tutorial.[/QUOTE
Thank you for the link, I skimmed it, will watch a couple more times, take notes, assemble all the parts, and give it a try. It may be what I was looking for, I'll report back in a couple days
Click to expand...
Click to collapse
Hey All, is there any program, or Motocast, that might be able to strip off my phone book from this Photon in its present state, or a way to find the file, or is it fotunately or unfortunately stored by big brother GOOG and could be restored if I get back to 2.3.4? TIA
Click to expand...
Click to collapse
dwegiel said:
youtube.com/watch?v=J94VcWk-CJc
You are welcome, full youtube tutorial.
Click to expand...
Click to collapse
Does this means that, if you have a 2.3.5, you can take it back to 2.3.4 and then unlock the booter? Still trying to get JB on mine...
jjamesss said:
Does this means that, if you have a 2.3.5, you can take it back to 2.3.4 and then unlock the booter? Still trying to get JB on mine...
Click to expand...
Click to collapse
Nope youre stuck like everyone else
Sent from my Galaxy S4
Verizon & HTC patched the current SunShine temproot with this update, however we have a downgrade path.
If you are on 1.85.605.9 you can downgrade to 1.85.605.8
If you need this RUU from @dottat - https://www.androidfilehost.com/?fid=529152257862670562
To flash the RUU, two methods exist. This should not wipe data, but always backup your data just in case. Again back up your data.
Method 1: (preferred)
Rename the file 2PS6IMG.zip (it is .zip, not .zip.zip, check to see if your os hides the file extension).
place the file on a sdcard, put sdcard into the follow and reboot to download mode using adb (adb reboot download) and follow on screen directions
Method 2:
Reboot the phone into download mode with "adb reboot download"
Use htc_fastboot (not the google version of fastboot) reboot the phone to RUU mode "htc_fastboot oem rebootRUU"
Then flash the zip
"htc_fastboot flash zip 2PS6IMG_PERFUME[email protected]60722.2_CNV_0.93_002_release_486126_signed_1.zip"
Thanks
-Patient Zero
htc_fastboot is not recognized as in internal or external command. im in download mode and trying to enter into fastboot
Thank you for your help i am Very new to this and trying to s-off so i can play around with some roms
stanfiem513 said:
htc_fastboot is not recognized as in internal or external command. im in download mode and trying to enter into fastboot
Thank you for your help i am Very new to this and trying to s-off so i can play around with some roms
Click to expand...
Click to collapse
Do you have the working fast boot files on your computer?
https://www.androidfilehost.com/?fid=24588212152305887
Open cmd from your fast boot folder, then enter commands
afuller42 said:
Do you have the working fast boot files on your computer?
Open cmd from your fast boot folder, then enter commands
Click to expand...
Click to collapse
Thanks man those files were what i needed. I also had something wrong either the name when flashing or the file was not in the right location. I added the .zip to the command and also moved the file into the fastboot folder not sure which one worked but i am currently "optimizing apps" and ill let you know what version it is when the phone finishes.
HA! you guys rock 1.85.605.8. Thanks to both of you sunshine passed when it used to fail. Thanks man for the help.
For some reason the advanced calling features no longer work every time I am on a call it drops to 1x
Edit:I swear I'm not a complete idiot but the advanced calling seems to work fine earlier today it was not working but I just checked in the exact same place and it is working now so I do not know exactly what was going on but it seems to be working now I'm going to S off when I get home. Thanks again for this downgrade
I currently need to send my HTC 10 in for repairs on the charging port/battery charging issues I'm having and I have a concern. I'm currently unlocked and S-OFF and if I RUU back to factory settings I will remain S-OFF regardless. When HTC gets my device they (I assume) will relock it and return it to S-ON status or shoot me a new/like new device. If they do return my device will I need to re purchase sunshine considering I sent my phone directly to u guys to have it S-OFF'd I'm just curious as to what my options will be. Thanks
eriknors said:
I currently need to send my HTC 10 in for repairs on the charging port/battery charging issues I'm having and I have a concern. I'm currently unlocked and S-OFF and if I RUU back to factory settings I will remain S-OFF regardless. When HTC gets my device they (I assume) will relock it and return it to S-ON status or shoot me a new/like new device. If they do return my device will I need to re purchase sunshine considering I sent my phone directly to u guys to have it S-OFF'd I'm just curious as to what my options will be. Thanks
Click to expand...
Click to collapse
Second guy this week? Sure it's a physical issue?
Sent from my SM-T810 using Tapatalk
dottat said:
Second guy this week? Sure it's a physical issue?
Click to expand...
Click to collapse
Yep I've done everything I can think of to try to get my phone to start charging, got a new cord, used 5 different chargers, did the whole factory reset/RUU (that worked for about a day and I got it to charge to 84%, held down vol+ and - and power for 2 mins nothing is working
eriknors said:
Yep I've done everything I can think of to try to get my phone to start charging, got a new cord, used 5 different chargers, did the whole factory reset/RUU (that worked for about a day and I got it to charge to 84%, held down vol+ and - and power for 2 mins nothing is working
Click to expand...
Click to collapse
Cleaned out the port?
Sent from my SM-T810 using Tapatalk
dottat said:
Cleaned out the port?
Click to expand...
Click to collapse
To the best of my ability with some cotton and alcohol
I also have lots of battery charging issues. Mine will not charge unless I reboot while plugged in. Tried multiple chargers, cables, Roms, full whipes, formatted data, stock rom, ruu, everything. Just when I get frustrated enough to do something if starts charging again.
Quick and yes maybe for sure "noobish" question.. Feb 17th VZW is disconnecting this line. (unlimited data plan) and my htc 10 is only 17% paid off. Obviously the first thing I did when I got this phone as well as my M8 was you sunshine. (unlocked/s-off) Now for noobish sake does this mean VZW cannot possibly anyway block my phone or IMEI or Blacklist so I would be unable to stick another carrier SIM card in and use my device with them? You know, bring your own device, byod? I never thought I'd be in this situation but I'm kind of freaking out so thanks for your understanding, thank you..
Sent from my HTC6545LVW using Tapatalk 2
I put it in these words because when I add up to the HTC 10 nothing at all was ever mentioned about ganking my account and leaving me with an unpaid device that I could not use unless I surrender to them and use the limited g*y data plans. So I just figured if they wanted to be bullies it would be pretty sweet for me if they try to lock my phone or Blacklist it and they couldn't. Thanks again
1droidmod said:
Quick and yes maybe for sure "noobish" question.. Feb 17th VZW is disconnecting this line. (unlimited data plan) and my htc 10 is only 17% paid off. Obviously the first thing I did when I got this phone as well as my M8 was you sunshine. (unlocked/s-off) Now for noobish sake does this mean VZW cannot possibly anyway block my phone or IMEI or Blacklist so I would be unable to stick another carrier SIM card in and use my device with them? You know, bring your own device, byod? I never thought I'd be in this situation but I'm kind of freaking out so thanks for your understanding, thank you..
Sent from my HTC6545LVW using Tapatalk 2
I put it in these words because when I add up to the HTC 10 nothing at all was ever mentioned about ganking my account and leaving me with an unpaid device that I could not use unless I surrender to them and use the limited g*y data plans. So I just figured if they wanted to be bullies it would be pretty sweet for me if they try to lock my phone or Blacklist it and they couldn't. Thanks again
Click to expand...
Click to collapse
They can't do that to your device, it would be illegal. You can bring it to any carrier also. Sticking to stock Verizon rom will get you a pop up saying sim is not from Verizon but everything should function.
You could really stick it to them and fully convert your phone to us unlocked after you switch and no more sim pop up and completely Verizon-less system/firmware, that's probably way to go anyways if switch carriers
afuller42 said:
They can't do that to your device, it would be illegal. You can bring it to any carrier also. Sticking to stock Verizon rom will get you a pop up saying sim is not from Verizon but everything should function.
You could really stick it to them and fully convert your phone to us unlocked after you switch and no more sim pop up and completely Verizon-less system/firmware, that's probably way to go anyways if switch carriers
Click to expand...
Click to collapse
Cool, thank you for the confirmation. Tomorrow I am speaking with Stephanie B. A supposed VZW executive. I only average to 241 gigabytes a month, I was never made aware of a 200 gigabyte cap so I'm going to see what I can do about keeping it open but I also have a second line that is also unlimited data which they don't care about at this time because it doesn't come close to 200 gigabytes a month so I think I might have some wiggle room but I don't know. I just wanted to express to her my main concern is the fact I was never made aware about what happened over 200 gigabyte cap and also we as their customers we're never given a questionnaire or survey as far as the 1% of their customers who have unlimited data goes what should happen to us as far as going over 200 gigabytes is concerned. I doubt anything will happen that's not going to already but I'll let you know if I get to keep my line. Thanks again
Sent from my HTC6545LVW using Tapatalk 2
delete
dottat said:
Second guy this week? Sure it's a physical issue?
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
I just got mine back. Took to Verizon a complete brick. I've only had 4 months. Finally got the new one in mail
About to downgrade and use sunshine and yes it has to be paid for again. Geesh these 10's are much more fragile than my old m8 . First device I've ever bricked. Now I didn't have to pay anything for replacement to be sent. I know people personally there though
Good luck and happy flashing
10
Just wanted to say thanks for this. Got my replacement in the mail after a brick. Immediately before reading the latest ota blocked sunshine from working. I took ota and set up device. Searched & downloaded your linked file : renamed and moved to SD card. Here is where it got strange. Battery over 50% mind u. Ran first time failed near the end. Left device useless. Tried to run again after booting back to download mode. Failed again. Only to boot device into white HTC screen. Well after about an hour of trying to figure out a way out the hole I've dug again, because PC will not recognize phone like this. And I could not fastboot said file. Anyhow after about another hour I tried again. And finally the same thing loaded everything properly and finished without an error. So successfully downgraded firmware so I could run ☀ . Ran sunshine and am s-off,now.and all is well. Any understanding why it would fail twice then work. Same method.?
Sent from my HTC6545LVW using XDA-Developers Legacy app
mattie_49 said:
Just wanted to say thanks for this. Got my replacement in the mail after a brick. Immediately before reading the latest ota blocked sunshine from working. I took ota and set up device. Searched & downloaded your linked file : renamed and moved to SD card. Here is where it got strange. Battery over 50% mind u. Ran first time failed near the end. Left device useless. Tried to run again after booting back to download mode. Failed again. Only to boot device into white HTC screen. Well after about an hour of trying to figure out a way out the hole I've dug again, because PC will not recognize phone like this. And I could not fastboot said file. Anyhow after about another hour I tried again. And finally the same thing loaded everything properly and finished without an error. So successfully downgraded firmware so I could run ☀ . Ran sunshine and am s-off,now.and all is well. Any understanding why it would fail twice then work. Same method.?
Sent from my HTC6545LVW using XDA-Developers Legacy app
Click to expand...
Click to collapse
Same situation but different device.. Samsung s4 or s5 nt sure anymore but downloaded stock firmware and used correct drivers/ODIN, flashed atleast 3 hrs straight always failed, finally it worked, dont know what/why it took so many tries but I was not quiting until something gave... Was very strange, like ur deal.
Sent from my HTC6545LVW using Tapatalk 2