Related
When I plug USB cable in my win64 device manager recognises the usb connection as "SAMSUNG Mobile USB Composite Device"
Kies automatically starts.
but Kies does not does not connect to my phone
nor does my phone show in "My computer"
If I enter storage mode then I can access SD card and external card.
of significant note is I recently did a full format and installed Check's Dark Knight Edition Rom (but I can't post there due to newb restrictions).
I have tried to reinstall drivers using Kies but that hasn't worked.
I have deleted the drivers from PC using device manager and allowed windows to reinstall them.
any help is greatly appreciated, thank you
I get no error messages
I've tried connecting with debug mode... it installs drivers but still computer doesn't recognise phone.
Still phone appears connected in device manager.
You have to close all open programs on your phone and return it to the home page. Until you do this your phone will not connect. You should then see a Usb Plug on your screen. It should then say Initializing and then connected. Then you should see it in My Computer and get into you phones files though there too.
Hope this Helps......
Thanks.. but I know about that and it isn't that.. also.. since installing LiteningRom this has not been necessary... but good call thank you.
I've tried to connect on a different computer and was unable to connect to that.. so possibly an issue with the phone?
Could it be that you have activated the "USB debugging" mode under settings->applications->development?
So I install Cognition S2 ROM and it works fine!
Alchemius said:
Could it be that you have activated the "USB debugging" mode under settings->applications->development?
Click to expand...
Click to collapse
Nope not that.. I had turned debugging USB on and off a number of times in the hope it would do something.. but nope
Just to test this out...
I reinstall Check's Dark Knight Edition Rom and once again I cannot connect to my computer...
I will remove this rom, factory rest and install something else
I have noticed.. 2 extra drives appear in "my Computer"... I can't access them but they appear when I plug in my phone.. and disappear when I remove it
so clearly my external and internal cards phone SD cards are not being recognised correctly when using Check's Dark Knight Edition Rom...
any ideas?
and yes I have removed, deleted drivers numerous times... installed via Kies installed via auto Windows
ok... installed Cognition S2 ROM and connected to computer... it the phone says MPT - initialisation then MPT- connection it didn't say this with dark rom!
For anyone else having this issue, it seems to be related to MTP. MTP is present in cognition, and removed from Check's rom, you can easily add this back in to make it work.
I've done a search for this with the intention of reinstalling it..
but I cannot find anything... maybe my search is off or I'm not using the correct keyword.. any help here would be great.
Also.. as this seems to be removed from a number of ROMs I have a further question.. what is the alternative?
Thanks
http://db.tt/xtrm0i0
Copy and paste file into system/app and change permissions.
Sent from my GT-I9100 using XDA App
Thanks.. but still what do ppl use to back up their phones? if they haven't got this installed?
Dizzee, I had the exact same problem as yours and solved it my removing "USB debugging" in settings, as Alchemius mentioned previously. Can you double check you've done this.
Hi guys,
Please help me out. I'm about to pull my hair out!!
I installed Kies and the USB drivers, but everytime I try to USB tether, Windows 7 fails to install the driver. I tried uninstalling the Samsung drivers on the computer where it won't work, but it still won't install.
The weird thing is that I plugged in the phone into another computer also running win 7 and that computer easily found the right driver and installed it. Didn't need to install Samsung drivers.
What happens is the driver is downloaded, tries to install, then gives me an error. I attached an image of the error I get. Any advice would be appreciated!
There's a program called driver magician that allows you to take and save a driver off one computer and restore it in another.
If you don't go that route you can always leave the phone plugged in and open hardware manager. Then delete your phone. When it asked choose to delete the driver with it.
Then try it again.
Sent from my páhhōniē
Thanks. That didn't work, but I figured it out!
For anyone who has a similar problem with installing a driver, open up setupapi.dev.log in notepad which is located in c:\windows\inf -- it's kind of a labyrinth to navigate, but I found that I was missing a file which it was looking for. I then found that file on another computer, put it into c:\windows\inf and it worked. There were two missing files actually, usb8023x.sys and rndismpx.sys. Took me all day but finally got USB tethering working.
Unfortunately wifi tethering doesn't work (no internet connection) -- anyone get that?
Nice work.
Never had issues with wifi tethering. Have you made any changes to your phone? Root, rom, ect?
Sent from my páhhōniē
I'm on stock ROM but I did root it to delete the tetheringmanager apk
When I was on stock I did that too with no issues. Try downloading a tethering app from the market like barnacle and see if that makes a difference.
Sent from my páhhōniē
Hi all,
I have an Aria running CM 7.2
I have a PC with Win XP SP3 where I am not able to connect my Aria because of lack of drivers.
I don't want to download and install HTC sync (pay-per-use plan).
Is there a standalone driver pack for Aria which I can use for:
ADB: VID_0BB4&PID_0C92&MI_01
Android Phone: VID_0BB4&PID_0C92&MI_00
Also there are other hardware IDs which I don't have right now, like fastboot etc.
I searched the internet and could not find any helpful drivers.
Can anyone help regarding this?
You can get the drivers here:
http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
File size: 13.1 MB
Thanks for the above. I installed it.
But I still get error messages saying hardware not recognized.
The (new!) hardware IDs are:
Without ADB
Android Phone : VID_0BB4&PID_0FF9
With ADB
Mass Storage : VID_0BB4&PID_0C92&MI_00
and still cannot connect the phone.
I tried specifying the path to the actual drivers in the HTC program folder, but no help.
Any solutions?
plade said:
Thanks for the above. I installed it.
But I still get error messages saying hardware not recognized.
The (new!) hardware IDs are:
Without ADB
Android Phone : VID_0BB4&PID_0FF9
With ADB
Mass Storage : VID_0BB4&PID_0C92&MI_00
and still cannot connect the phone.
I tried specifying the path to the actual drivers in the HTC program folder, but no help.
Any solutions?
Click to expand...
Click to collapse
I tested my Aria with an old PC and it worked. Try installing the latest version of HTC Sync: http://dl3.htc.com/application/sync/htc_sync_3.0.5617_us.exe.
Can you explain how you are attempting to connect the phone? Are you just trying to use the RUU? Are you trying to use adb?
The drivers I linked to should allow you to do both.
Here's what I did.
I tried to connect the phone (normal working condition running CM7) without any drivers installed.
The missing hardware IDs were the ones in the first post.
Then I tried to install the drivers from the link.
The installer did not work, some trouble with the MSI Package.
I went to temp folder and ran the MSI package by itself. This time it ran.
Then when I tried to connect the phone (running, with ADB on), it detected drivers like Android Phone, USB Composite Device, ADB.
But got stuck when Mass Storage was to be installed. Threw a 'new hardware found' window at me.
I disconnected and connected without ADB this time.
This time it got stuck on Android Phone.
Can you verify the file's MD5 sum? It should be:
HTCDriver3.0.0.007.exe
f60771a86c4ad69c8c9c1d158e60e850
I'm not sure what else could be the issue unless some old drivers are interfering or something.
drumist said:
Can you verify the file's MD5 sum? It should be:
HTCDriver3.0.0.007.exe
f60771a86c4ad69c8c9c1d158e60e850
I'm not sure what else could be the issue unless some old drivers are interfering or something.
Click to expand...
Click to collapse
Well the MD5 is all good. Probably the machine is messed up.
Other USB devices do work though, without a problem.
Anyway, this is only a spare machine. Just was wondering why it would not work here. I might try installing HTC Sync later, but I highly doubt it will work.
Thanks a lot for the help.
Im so saaad! i think its all my fault.. i copied everything from my galaxy s2 storage over to my new xperia s.. and now it doesnt recognize the phone so i can transfer files..
what should i do ? please help!
btw the phone is just awesome! wauw!
I would also like to know how to properly mount the storage to a PC so that it is recognised as a Mass Storage Device rather than a MTP connection..?
Its so annoying not being able to see thumbnails of the pictures/videos you are trying to access..its also annoying that the PC has to spend time on downloading the files before playing rather than streaming straight from the storage.
Anyone have any ideas? plz..
Rather than starting a new thread I just used this one..thx in advance
When you connect the phone, on notification bar should say Internal storage connected. When you go to My Computer you should see Other section, where new device come up, called... Xperia S. Double click on it, so it goes to Internal storage. Again, double click and... you can see internal content. Hope it helps.
Same thing happened to me.... Today onwards time n again seeing a mtp driver failed issue when connecting to my win7 laptop. It wad working fine earlier. When I switch off n restart the device,it installs driver correctly and autoplay option comes up to open the xperia s device. However when I click on open folder, I dont see any folders in my xperia s phone. Hence no file transfer is possible. How can I get my phone working again?
I tried to do pc system restore... Since it was working yesterday...but that didnt solve the issue either. Any ideas?
Sent from my LT26i using XDA
Do you use different USB ports? Try to stick to only one. I still have XP and mine is always working, so this is definitely PC and windows issue.
I have a Win7 64bit Home Premium edition VAIO.
when I first got the phone, I could use it to connect to PC Companion. It would also show up as a storage device automatically, and using the same I had copied over music and pictures.
However, after 2 days of use, I noticed, my phone was no longer being identified as a device. Also, it gets a Code 10 - Device cannot be started error when I look into the driver details.
I tried to reinstall the MTP driver, but it never gets installed successfully. It always gives a driver failed to install error.code 10.
I can still connect my WD hard disk and other usb devices.
I saw somewhere in the Forum someone had described that I needed to uninstall and reinstall WMP to make this work. Didnt work
I downloaded the Windows DEK to ensure that all the drivers gets reinstalled, that didnt help either.
I also restored my laptop back to factory setting......still no luck with the fresh install.
So, here I am with a phone where I cant connect the device to move in OR out music/pictures etc.
The problems are:
1) MTP driver gives an error while installation. I tried to manually select the MTP USB driver and isntall it. That didnt work either.
2) When I connect SEUS, with the phone restarted by holding the volume button SEUS identifies the phone and shows me that there are no updates. Not sure if SEUS can be used for exploring the phone. Most probably NO.
3) PC companion tries to find the phone. It says it may take few minutes to identify the phone if it has lots of files. After that the operation fails suggesting that PC companion could not find the phone.
I restarted both the phone and my device several times......did not work.
I uninstalled the MTP and USB drivers and restarted and got them reinstalled........didn't work either.
Any idea on what needs to be done?
I have tried all the ports and a different USB cable as well.
I even tried changing settings of the usb port as described in the below link..
Nothing worked
Is it possible to get the Sony specific drivers from somewhere?
Hi has this problem been solved. I have two computers, the win 7 one installed fine but it refuses to work on the xp one.
any help?
intellix said:
I have a Win7 64bit Home Premium edition VAIO.
when I first got the phone, I could use it to connect to PC Companion. It would also show up as a storage device automatically, and using the same I had copied over music and pictures.
However, after 2 days of use, I noticed, my phone was no longer being identified as a device. Also, it gets a Code 10 - Device cannot be started error when I look into the driver details.
I tried to reinstall the MTP driver, but it never gets installed successfully. It always gives a driver failed to install error.code 10.
I can still connect my WD hard disk and other usb devices.
I saw somewhere in the Forum someone had described that I needed to uninstall and reinstall WMP to make this work. Didnt work
I downloaded the Windows DEK to ensure that all the drivers gets reinstalled, that didnt help either.
I also restored my laptop back to factory setting......still no luck with the fresh install.
So, here I am with a phone where I cant connect the device to move in OR out music/pictures etc.
The problems are:
1) MTP driver gives an error while installation. I tried to manually select the MTP USB driver and isntall it. That didnt work either.
2) When I connect SEUS, with the phone restarted by holding the volume button SEUS identifies the phone and shows me that there are no updates. Not sure if SEUS can be used for exploring the phone. Most probably NO.
3) PC companion tries to find the phone. It says it may take few minutes to identify the phone if it has lots of files. After that the operation fails suggesting that PC companion could not find the phone.
I restarted both the phone and my device several times......did not work.
I uninstalled the MTP and USB drivers and restarted and got them reinstalled........didn't work either.
Any idea on what needs to be done?
I have tried all the ports and a different USB cable as well.
I even tried changing settings of the usb port as described in the below link..
Nothing worked
Is it possible to get the Sony specific drivers from somewhere?
Click to expand...
Click to collapse
I've got the same problem, but you can still use MyPhoneExplorer from
.fjsoft.at
to access your phones data. please also read the forum, because it needs an app on your phone too.
fjsoft.at/forum/viewtopic.php?t=11454
Also I've called with the xperia help line about a driver pack, but there aren't any lose available, exept what is in SEUS or PC Companion, but they don't work for me.
Can also some tell me if SEUS also will provide the new firmware 6.0.A.3.67? because SEUS tells me that my phone is uptodate, but I still have 6.0.A.3.62.
Install the latest version of media player, that worked for me.
Try connecting phone in Debug mode. On first time MTP driver installation will fail too but after that disconnect phone, disable Debug mode in phone and connect. Now it should working.
If will not working then go to Device manager on your PC, find "Mobile devices", select something with MTP in name, right click and choose "Uninstall". Disconnect phone, connect again and now it should working.
Worked for me!
Hurray! I fixed it on my computer WinXP sp3. I did everything with MTP bla bla winmedia11 even dev kit MTP = No fix.
go to Settings-> apps-> handle apps-> all-> MtpApp <open it.
Clear data and cache. (restart phone if you want)
plug the phone in USB and wait.. the scanner/camera thing comes up.
Right click on This computer (my computer?) chose "Handle" -> device manager -> scanners and printers-> right click on the "phone" -> settings -> device driver-> update.
Chose let windows search for XXX and voila MTP device driver found and installing.
(I'm using Swedish interface so the names of step might be wrong )
I can confirm that delete data / cache on MTP App indeed solved the problem. Thanks
I have installed the 10.1.3 Cyanogenmod Rom on my Nook Tablet, and everything was working normally. Specifically, I could connect it to my Winodws XP system via USB and transfer data via MTP. I wanted to repartition the internal storage from the 11 and 1 GB shared. The process required installed ABD, and I didn't understand at first that this processes required ADB access in recovery mode. I was able to repartition the device the way I wanted and reinstall everything, however, afterwards I could no long access this device over USB as an MTP device, or a PTP device, or a USB device. I think this is probably a driver problem, but I don't know what to do to fix it.
I'm using Windows XP SP3, I have Windows Media Player 11.
When I have My Nook set as an MTP device, the system looks like it is installing an MTP drive, but does not complete. The Entry in device manager only describes is as an "MTP Device" but that there is no driver installed, and keeps prompting in the system tray that it is installing an "MTP Device" driver over and over again.
If PTP is selected, is shows as a USB still camera, but I cannot access any thing on it, and in USB mode I just have a USB device in device manager with an "!" on it.
Any suggestion on how I can get the correct drivers reinstalled?
Thank
For me Unfortunately, MTP application has stopped problem is solved !!!
Read my post #6, problem is solved !!! very minor point but we tend to overlook it...
http://forum.xda-developers.com/showthread.php?t=2547187
Do vote me Thanks if your problem is solved...:good: