[JB] google voice missing hotword - Android Q&A, Help & Troubleshooting

I'm running team eos jb nightly 126 and goals 0726 on my Xoom(wingray) and this version seems to have lost the hot word detection. In the previous rev there was an option for Google now to respond to the word Google. Now I have to tap the microphone before asking questions. After I flashed 125, I downloaded the offline language pack. In the previous rev there was a Google now option to recognize hot word, and now it seems to be missing. To flash the 126 ROM, I wiped cache, dalvik, format system then flash ROM, and gapps. Did I forget a step?
Other than this minor hiccup, the ROM has been great. Fast and stable.
Thanks

Language in Settings -> Voice must be set to English (US) not UK or another variation.

Related

[Q] My google navigation crash on XXLP6

Hi
Now I update my phone from XXLP2 to XXLP6.
Now the network working really perfect. Wonderful.
I also Install the GPSfix, so the GPS is working perfect.
But my Google Navigation crash, when it has to show the map.
Google Maps works perfect, but when I has to navigate to a location and
it startup the Navigation app, it crash when Navigation has to show the map.
If I uninstall the new version of Google Maps/Navigation and use
the old version of Google Maps/Navigation it works perfect.
Is there anyone else who also has problems with the new Google Navigation ???
Regards Peder
Old Version working Maps/Navigation : V6.0.3 #6000300
New Version Not working Maps/Navigation : V6.2.0 #6020014
Everything is working fine for me, so its not a rom fault. Have you tried a full wipe? Or did you update with no wipe?
Test leaked beta rom has problems that why Samsung have not released it .
jje
Yes. I did this to wipe :
Boot in my CWM-based Recovery v5.0.2.7
Wipe data/factory reset
wipe cache partition
Go in "Advanced and Debugging Menu"
Wipe Dalvik Cache
Wipe Battery Stats
Go in "Mount menu"
Format /system /data and /cache
Now I has try this :
Wipe
Reflash XXLP2 4.0.3
Update Maps/Navigation
Test : Did not work
Wipe
Reflash XXKI3 2.3.5
Update Maps/Navigation
Test : Works
Wipe
Reflash XXLP6 4.0.3
Update Maps/Navigation
Test : Did not work
Could well look like it will not work on 4.0.3 for me.
But it's weird that it works with you!
Regards Peder

problems with d-wiz (bad place but i can't post in the appropiate place)

First of all, hello
Is my first thread and i can't post directly on appropiate section of d-wiz rom, i'm so sorry to admin for post in wrong place but permisions and those things...
2nd to say, a BRUTAL thanks to all for your titan work. Thanks to you, i had updated my "little" razr maxx to ics when the official version was launched and, after that i learned to use SafeStrap, root... well, i thought that you know what i refer, i'm learning every day a new thing.
Now, about the title,
I'm using the d-wiz rom from 0.9 version but in the last "update" i have had the next problems
-I couldn't update using "update me", after reboot still in 2.0.2, for that, i download and install over the old version, the same that i had to do when appears the 1.0.5 version
-On 2.0.3 i'm having problems with google talk, every 3 or 4 min, systems tell me that google talk has been stoped.
In my curiosity... i was trying things, to be trust is the first that i try, is to do a "voice search", after "listen" the app crash. Lookslike that i'm having problems with that app (voice search).
I hope that dtrail can read it, if you (dtrail) need any extra info for repeat the crash, here you have an old tester of your room.
And again, THANKS, your working is amaizing.
I also have some issues with the ROM, besides quoted by OP.
I can not record videos when recording starts, the Gallery app breaking.
Some times the boot freeze in the animation, and the Razr restart the boot, the only way to properly start.
EDIT: When I use the Google Now to search, the message "Google stopped" appears.
Sorry for the bad english.
You can reinstall gapps (latest, wipe cache) or reinstall rom.
I recommend the second choice. Wipe all, format system, install latest version
i think ur best bet is to factory reset and wipe cache then flash the rom again
and if ur using titanium backup, make sure u dont restore duplicate apps after flashing (the old version app with problem, say Gtalk)

AOSP ROM for Lenovo P780

Another.... One.
AOSP ROM for Lenovo P780
Original Link:
http://4pda.ru/forum/index.php?showtopic=475747&st=8260#entry29011125
Miror:
https://drive.google.com/folderview?id=0B2ORIgaV4iacZTdKSXVyYXBWVlU&usp=sharing
Instructions:
China ROM Vibex installed;
Copy the ARCHIVE:AOSP 4.4.2 v.1.8.zip on phone memory or SD;
Restart in Recovery(TWRP or CWM)
Install the ARCHIVE:AOSP 4.4.2 v.1.8.zip from Recovery and then Wipe Data,Cache, Dalvik Cache,etc,etc;
Restart the phone.
WARRNING: ROW AOSP DEVELOPMENT HAS STOP. THIS ARE THE LAST ARCHIVES FOR ROW ROM
ROW ROM rooted from satanduk post installed;
Copy the ARCHIVES:AOSP 4.2.2 ROW V1.3, AOSP 4.2.2 V1.4.zip on phone memory or SD;
Restart in Recovery(TWRP or CWM)
Install the ARCHIVES:AOSP 4.2.2 ROW V1.3, AOSP 4.2.2 V1.4.zip from Recovery and then Wipe Data,Cache, Dalvik Cache,etc,etc;
Restart the phone.
V1.8 ONLY FOR CHINA FIRMWARE
-new start animation
-Zoom button in the dialer
-Updated all Google's services, in particular keyboard
-ZipAlign Full
-Added standard live wallpaper
Added Mx-Pro Player
-item in the Startup settings
-install script now vaypaet not date
-Standard oboina of 4.4
V1.7 ONLY FOR CHINA FIRMWARE
-screen Edited outgoing call - thanks mixmax1982
-mode processor upgraded to Ondemand (full, not clipped ) - uniform load on all cores. Power consumption should fall
-Added support init.d
-Updated BusyBox
-Added support for RDS in FM-radio
V1.5
-Fixed crash in live wallpaper
-Camera replaced by Lenovo camera-so now the camera is fully functional and there is no any problem.
-processor operating normally while all active sensors
-Fixed Auto Brightness. Now it works correctly translated app-notes (NoteBook)
Changes in 1.4
-Item Display settings (Used Light Flow)
Pips-density screen, and change the font to Settings-Screen
-CPU management in Settings-For developers
-Fixed phone information to Settings-About phone - Device Information
Changes in 1.3
-Built-in Adobe Flash Player 11 and AdAway (ad blocker)
-Removed some unimportant Google services (You can download from the Market)
-call button on the center -Added ROW version Updated Xposed-Installer -Updated Google services and Superuser VIPER-Updated -Fixed translation errors New bot-logo
Changes in 1.2
Strip-"tails" from Acer. Now Lenovo
-Gravity Box Updated to version 3.0.2
Changes in 1.1
Ganitura-
Vibration-soft keys
, good sound library (old sound sloppy)
-Sensor Calibration
-Returned original SMS. Modified crash.
V52 Modem
Changes in 1.0
-Setting ringtones for each Sim : Blush:
-Advanced menu. For me it's more convenient than a GB -launcher now Nova. As he only has a bunch of stock options , returned to standard camera android -Built into ViperFX -Firmware altered under Chinese markup -In setting the added items Atozagruzki, ViperFX, turn mute on schedule. Added-Noise -Fixed an issue where if you disable one of the SIM icon has not changed -Removed problem where when you press the power button when the phone is locked, soft keys light up , now there is no delay release -Updated all software to the newest versions Made-view stock dialer -Engineering menu in step 180 c Russian language (For enthusiasts ) -Added engineering menu item in the setup developer
Indications:
Customizable display through LightFlow.
1. Run Light Flow, in "Settings" program:
2. "Direct method".
3. Insert "mode Root".
4. "Control LED" -> manage LightFlow
5. Include "Spec. Opportunities" (Settings-> All Settings-> Spets.vozmozhnosti-> Services-> LightFlow -> ON)
6. Set up a "notice" for themselves, not forgetting that we have only the green LED.
Custom Calls and Message Tones How To:
Create a folder on the main memory ringtones and throw back a desired tone. Then go to settings-sound-melody and choose that tune that threw into ringtones (it appears). Voila!
Gravity Box is stable. Nowhere else did not observe such stability.
For magnetic cases apply the patch from recovery without wipe.
Everything you do, you do at your own risk.
And now some screenshots!
I am currently on this rom and it is excellent.
Trimis de pe al meu P780 folosind Tapatalk
am on Vibe 1.5 kitkat, can I straight flash this rom?
btw am using a P780 china 4gb version,
thanks
Look at the Instructions on original post and make backup of your system first. Never forget to do backup.
Sent from my Lenovo P780 using xda app-developers app
stympy said:
Look at the Instructions on original post and make backup of your system first. Never forget to do backup.
Sent from my Lenovo P780 using xda app-developers app
Click to expand...
Click to collapse
thanks, but just want to confirm that its ok to flash the ASOP rom for China 'KIT" rom even is on Vibe1.5 kitkat, don't want to brick the phone,
thanks for anyone who can confirm, thanks
Only one SIM detected
After flashing the ROM, it appears to be detecting only one SIM. I have cleared the possibility defecting SIM card by trying it out in other Mobiles. Is it that I have to again rewrite the IMEI codes from the back up using Mobile uncle? Super camera and super gallery are not thare should we get the apk and install?
Hi, am on Chinese Firmware 4gb with Vibe 1.5 Kitkat, want to go bloat free, which rom would you recommend? AOSP or SLX? why?
willl I lose IMEI if switching from Chinese to ROW? thanks
DON2003 said:
Hi, am on Chinese Firmware 4gb with Vibe 1.5 Kitkat, want to go bloat free, which rom would you recommend? AOSP or SLX? why?
willl I lose IMEI if switching from Chinese to ROW? thanks
Click to expand...
Click to collapse
SLX sxeems to be better ! I use LiFe v.0.7. For me is the best.
Sorry stympy i dont read this thread, once again sorry my friend
btw, stympy how must i doing when from this rom -> http://goo.gl/oAAKPU ???
thanks before
Excellent ROM, in v1.6 is more stable and faster. I flashed after full wipes. The only problem, is some animations with some lag and Quick and extra settings with GravityBox not works fine, but this is problem cause for compatibility of MTK and kitkat.
But Lenovo released the Vibe UI from ROW versions, I will expect ROW AOSP versions and repartition tool from India forums. The best ROMs actually are, SLXROM (by Silentxxx) and AOSP versions (by power19), from Russian Lenovo forum and 4pda forum respectelly.
Flashtool version
Any one have a backup this rom with mtkdroid tool & make flashtool version??.
haahaaah said:
Any one have a backup this rom with mtkdroid tool & make flashtool version??.
Click to expand...
Click to collapse
Better you install or follow the thread at needrom discussion of p780 and follow the step by step tutorial. You don't need flashtool except for installing chinese version of p780 firmware prior to this aosp rom.
stympy said:
Look at the Instructions on original post and make backup of your system first. Never forget to do backup.
Sent from my Lenovo P780 using xda app-developers app
Click to expand...
Click to collapse
I have v1.7 , is there any way to upgrade to v1.8 without losing or restoring the entire data from scratch ?
Also, is there any way to skip the data to be installed in SD card because for the security reason I am looking for an option which could install all the apps in phone internal memory instead of SD card because SD card can be removed and data can be accessed anytime if the phone is lost.
---------- Post added at 02:22 PM ---------- Previous post was at 01:39 PM ----------
I just flashed v1.8 and then wiped dalvik cache and thats it. I am on v1.8 and I must say BOOT ANIMATION plus STARTUP ITEMS is a charm.
My tests and solutions on the AOSP 1.8:
- The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
- StandardCamera.zip it's SnapCamera. So I intalled the Google Camera from Plays Store and tested HDR, that doesn't work. PHOTOSPHERE and LENS BLUR works. Gallery Crashes while trying to edit a picture.
- Google launcher.zip works but overwrite nova prime. Titanium backup is recomanded.
- Gravity Box is stable, but a lot of tweaks are not applied.
Here there are my steps for the INSTALLATION and to solve the ISSUE ABOUT GOOGLE ACCOUNTS :
- I installed Vibe UI with Flashtools, just booted to check it then I rebooted in recovery. I didn't put any google account on it.
- From recovery I installed the AOSP 1.8 4.4.2
- At the first boot I get this 2 messages: "Unfortunately, the process android.process.media has stopped" "Unfortunately, the process com.android.systemui has stopped" and I can't go on seting up the phone.
- Back in recovery tried a wipe to factory settings, it works, so I enter in the O.S.
Then
- Once in the O.S. I cant get to login in my Google Accounts, I get "there was a problem communicating with Google Servers"
- Back in recovery tried another wipe to factory settings, it DOES NOT works.
- From recovery I flashed again AOSP 1.8 over the AOSP 1.8, it DOES NOT works.
- Downloaded the GApps_Light_4.4.2_signed.zip, it DOES NOT works.
- So i was tired, and I installed from recovery SLX v26a CHINA.
- In SLX v26 I tried to log in with Google Play, and I logged in with success.
- Back in recovery I flashed again AOSP 1.8 over the SLX v26 china.
- Booting the AOSP 1.8, Google Play icon and files exist, but in SETTINGS->ACCOUNT there is no option to put a Google Account (only standard EMAIL ICON) and if you try adding it from Google Play, it crashes.
- Again, back in recovery, I Installed again GApps_Light_4.4.2_signed.zip
- Still in recovery, I tried a Wipe to Factory
- Back in the O.S. I tried to add an account in Settings->Accounts, and finally it works.
I found GApps_Light_4.4.2_signed.zip on XDA but i cant remember the address of the discussion. Mine was of size of 47.4 MB not the one of 50 MB, the second ones gave me an error in recovery.
Here there is the file from my GDrive: https://drive.google.com/file/d/0BwGOPBqfPRJXUzJvc0JOT2NfYlU/edit?usp=sharing
DIALER
After installation I found a DIALER with russian alphabet.
The solution is HERE:
XDA: [Port] [APK] KitKat Google Caller ID Dialer - xda-developers
More about Google caller id https://plus.google.com/photos/+andr...70061497141729
Download: http://forum.xda-developers.com/attachment.php?attachmentid=2413224&d=1385365522
At the end I have 2 dialer, one with russian alphabetand the second one by google with Caller ID funcion.
-
-
UPDATE: I just noticed that the screen remains ON while you are in a conversation with BLUETOOTH erarpiece. The proximity sensor and the SCREEN TIME OUT doen't work during the calls with bluetooth, screen remains ON
What works:
Tethering
Car Mode.
PHOTOSPHERE
LENS BLUR
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
What doent' works:
The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
UPDATE: I just noticed that the screen remains ON while you are in a conversation with BLUETOOTH erarpiece. The proximity sensor and the SCREEN TIME OUT doen't work during the calls with bluetooth, screen remains ON
HDR
Gallery crashes while trying to edit a picture.
A lot of Gravity box Tweaks doesn't works
Lenovo Power Centers 1.3 and 2.5
STRANGE BATTERY BEHAVIOUR
The very first day I put the phone in AIRPLANE MODE with 35% at 00.00.
At 06.00 the battery was at 32%. Usually with other roms there is no such consumption of energy, with no variation of percentage displayed.
Around 8 it starts with a drammatic dropdown of enery, quicly decreasing from 30% to 11%, as in the screen.
This behaviour never happen again.
54d7d1ef
The second day, after a full charge, I installed a System App and rebboted the phone. After reboot from 100% I get 76 % of battery indication, with a "hole" in the battery graph and stats. I rebooted again and the indicator displayed 99%.
This behaviour never happen again.
--update--
Tonight I put my phone in ariplane mode at 50% of charge. This morning I found the battery at 41%. I was quite sure that were no apps using GPS, but from the following screen it seems that GPS was turned ON all nigth long.
Does airplane mode should turn off ALL the signals? Why GPS remain ON?
-end of update--
Lenovo Power centers
All the Power Centers that I had from my backups doesn't works, they crash at boot, or doesn't install at all.
Lenovo Power version 1.3. - Installed, works in background, GUI crash opening it.
Lenovo Power Version 2.5. from ROW s116.- Installed, doesn't works in background, GUI crash opening it.
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
Dagon84 said:
My test and solution on the AOSP 1.8:
- StandardCamera.zip it's SnapCamera. HDR doesn't work. PHOTOSPHERE and LENS BLUR works. Gallery Crashes while trying to edit a picture.
- Google launcher.zip works but overwrite nova prime. Titanium backuop is recomanded.
- Gravity Box is stable, but a lot of tweaks ar not applied.
- The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
DIALER
After installation I found a DIALER with russian characters.
The solution is HERE:
XDA: [Port] [APK] KitKat Google Caller ID Dialer - xda-developers
More about Google caller id https://plus.google.com/photos/+andr...70061497141729
Download: http://forum.xda-developers.com/attachment.php?attachmentid=2413224&d=1385365522
At the end i have 2 dialer, one with russian character and the second one by google with Caller ID funcion.
-
-
What works:
Tethering
Car Mode.
PHOTOSPHERE
LENS BLUR
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
What doent' works:
The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
HDR
Gallery crashes while trying to edit a picture.
A lot of Gravity box Tweaks doesn't works
Lenovo Power Centers 1.3 and 2.5
STRANGE BATTERY BEHAVIOUR
The very first day I put the phone in AEROPLANE MODE with 35% at 00.00.
At 06.00 the battery was at 32%. Usually with other roms there is no such consumption of energy, with no variation of percentage displayed.
Around 8 it starts with a drammatic dropdown of enery, quicly decreasing from 30% to 11%, as in the screen.
This behaviour never happen again.
54d7d1ef
The second day, after a full charge, I installed a System App and rebboted the phone. After reboot from 100% I get 76 % of battery indication, with a "hole" in the battery graph and stats. I rebooted again and the indicator displayed 99%.
This behaviour never happen again.
Lenovo Power centers
All the Power Centers that I had from my backups doesn't works, they crash at boot, or doesn't install at all.
Lenovo Power version 1.3. - Installed, works in background, GUI crash opening it.
Lenovo Power Version 2.5. from ROW s116.- Installed, doesn't works in background, GUI crash opening it.
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
Click to expand...
Click to collapse
Thanks for this best review.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Q: How to Change Modem?
How to change modem version in this ROM?
with default modem from v1.8, one of my SIM not have signal. I tried to install different modem from another post from recovery but still no signal. I did the same method for another ROM (SLX 26 CN/KIT) and it worked.
Tried to installed another Android 4.4.2 (vibe), have the same problem, and still can not change the modem
Any one can help?
momothecat said:
How to change modem version in this ROM?
Click to expand...
Click to collapse
the modem-file in this Rom is:
modem_1_3g_n.img
that file must be replaced with root explorer par example, but don't forget to set the same permissions than before.
For me the baseband v101 works fine.
EDIT:
Maybe you need to replace both modem files. I did it first with modem.img, but there was no effect und then I replaced modem_1_3g_n.img.
naish8.5 said:
the modem-file in this Rom is:
modem_1_3g_n.img
that file must be replaced with root explorer par example, but don't forget to set the same permissions than before.
For me the baseband v101 works fine.
EDIT:
Maybe you need to replace both modem files. I did it first with modem.img, but there was no effect und then I replaced modem_1_3g_n.img.
Click to expand...
Click to collapse
Yes you are right. The files must be replaced together.
stympy said:
Yes you are right. The files must be replaced together.
Click to expand...
Click to collapse
Hi, what do you mean that BOTH FILES MUST BE REPLEACED?
In etc/firmware I have only one file called modem_1_3g_n.img, there is nothing more.
It's another modem in another folder?
Dagon84 said:
Hi, what do you mean that BOTH FILES MUST BE REPLEACED?
In etc/firmware I have only one file called modem_1_3g_n.img, there is nothing more.
It's another modem in another folder?
Click to expand...
Click to collapse
Hi. You must look in /system/etc/firmware and /system/etc/mddb. This are the 2 directories or folders you must use.
Example:
In:/system/etc/firmware you will find the file called: modem.img
In:/system/etc/mddb you will find the file called: BPLGUInfoCustomAppSrcP_MT6589_S00_P780_V23
Do you understand now?
Look in my post:
http://forum.xda-developers.com/lenovo-p780/development/how-modems-t2757923
There you will find a bunch of modems to patch from TWRP.
First backup your modem files then HAPPY PATCHING.

Alice Project, Alice Project Reborn and CM V11 beta1 for Lenovo P780 Android 4.4.3 CN

Firmware is made based on Android 4.4.3, which gives it even more performance and smooth compared to most of our firmware. Through the introduction of scripts to optimize the firmware is very nimble and Energy-saving when used in the "Dialer" that one battery charge lasts for 3 days, and if used in this mode - 1.5 hours of games, music 1:00, 3:00 internet, sms, calls that I have enough for 2-2.5 days. As for performance I would say that the firmware also to the occasion. Niodnogo hard toy type Asphalt 8, Dead Trigger II, NFS MW not lag nigrama and pulled at the highest requirements.
The interface is designed in the style of the new Android L adds even more beauty and effectiveness. Quality camera will not miss out on the greatest moments of your life and make great pictures or video.
WARRNING THIS IS CHINA BASED FIRMWARE ! DO NOT BY ANY CHANCE FLASH OVER ROW! FLASHING IS DONE OVER KK VERSION OF FIRMWARE!
Alice Project Android 4.4.3 CN. Rom with material disign and OTA updates
Fast, beautiful, functional , multilanguage
All information, see the http://ali-pro.ru/
Update. I have uploaded for base firmware VIBEUI_V2.0_1437_7.14.1_ST.
First Flash with SP Flash Tool v.3 NOT OPTIONAL this firmware: VIBEUI_V2.0_1437_7.14.1_ST.zip.
After flash install via TWRP Alice Project.
1. wipe data/factory reset
2. wipe cache partition, mounts and storage except SD Card
3. format/cache
4. format/data
5. format/system, go back, advanced
6. wipe dalvik cache, go back
7. install zip
8. reboot system
9. after reboot you will get some error " error com.android.provision" do not pay attention and immediately reboot to recovery
10. install the patch(that file called Rev_Patch.zip)
11. reboot
12. good luck
Alice Project 9.0 Revolution
Original site link: http://ali-pro.ru/
http://alicerom.ru/
Visit and support them ! Use Google Chrome, the site is in Russian Language.
Mirror: https://drive.google.com/folderview?id=0B_B98oK4DpK1cVFLYzQ2dGd3RFk&usp=sharing
Post some screenshots !
New Uploaded Versions:
Alice Project Reborn 8.4
The list of changes is not big, but impressive.
Most importantly - completely redesigned last manager running applications. Now it will be a copy of Android 5.0 percent of 80-85, if not more. I want to see that implemented without third-party programs.
Removed custom dialer (dialer) and will be used native, only with our changes.
Removed custom contacts, and relatives will be used only with our changes.
Resolved bug with displaying the player buttons in the curtain
Should disappear bug with icons in the curtain with the inclusion of Bluetooth and an alarm clock. I have it as there was no and no.
In the Ukrainian language firmware added, now it is available for selection in the settings.
Alice Project Reborn 8.2
This update does not should be, but due to certain circumstances, decided to give all of the same update.
What's new:
Powered Gmail and other e-mail clients do not work
SIM contacts now available
In the firmware update program to display pop-up an incoming call. It just works automatically and is not available in any configuration or in the launcher. Disable this feature can only freeze the application L-Call in Titanium
Added status bar the color of the action bar in some applications. Thanks to the team for FMD useful manual.
Completely redesigned window incoming / outgoing call. Now it is 95-98% copy of Android 5.0
Added scrolling animation. Select it in the settings
Added pop-up notifications
Replace some of the graphics in the system
Well, like everything, which can and forget.
Alice Project Reborn 8.1
And so, what is new in this firmware:
There are no bugs with 8.0. Powered native lock screen keyboard without dancing with a tambourine, Brightness.
The modified shutter. Now fast settings can be edited through GravitiBox. Date placed under the clock, as in the real Android 5.0.
Returned to the standard screen running applications. Now he's not green and transparent.
Call screen is moved from the old Alice Project
Sound profiles deleted item in Settings. Now there's just sound.
Adjust the size of the font on your system.
Added Gapps. Now they do not need to put separately
Replaced launcher to Google Home
Added file manager
Added player Apollo
Alice Project Reborn 8.0
What has brought us this new firmware:
System
A new level of performance. AnTuTu indicator on Lenovo S920 = 17226 which is an absolute record among our firmware, it is even more than CyanogenMod11
Fully working ART
Additional optimization through init.d scripts and build.prop
Speed ​​and smoothness of scrolling at the highest level
Blocking applications are already sewn into the system
Powered LED
Powered unlock screen volume keys
Interface
Completely redesigned shutter. Now it is fast and smooth
Finished interface in the missing areas
Fixed some graphics
Added our proprietary boot animation accompanied by original melody inclusion
Added pack with original wallpaper
Edited lock screen
Modified and optimized battery in the status bar
Replaced dialer (please do not confuse with the screen call on him will also work in progress)
Replace contacts
Edit view dialogs
Set custom launcher (maybe it will be replaced in the next update)
Changed window running applications
Has a function of drawing quick settings swipe down the right edge of the screen
First Flash with SP Flash Tool v.3 NOT OPTIONAL this firmware: VIBEUI_V2.0_1437_7.14.1_ST.zip.
After flash install via TWRP Alice Project.
1. wipe data/factory reset
2. wipe cache partition, mouns and storage
3. format/cache
4. format/data
5. format/system, go back, advanced
6. wipe dalvik cache, go back
7. install zip
8. reboot system
10. install update 7.1
11. reboot
12. install update 7.2
13. reboot
14. install update 7.3
15. reboot
16. install update 7.4
17. reboot
18. install update 7.5
19. reboot
Alice Project v.7.5
Changed the color of the application sms / mms
Redesigned interface incoming / outgoing call
Added branded boot animation
Alice Project v.7.4
Curtain and the status bar:
Edited icon settings
Fixed display of 2 identical inscriptions Data
Increased in the amount of the top panel
Improved swipe to show / hide quick settings
Resized status bar
New proprietary battery that does not limit climbs for other icons, ie is displayed on the same level with all
Animation charging this icon. Icon called AliceIcon
Settings:
A new hidden item Sound
New image - logo in Settings - About phone
The shadow of the Action bara.So time will in all applications
The system:
A new kind of dialog boxes
Alice Project v.7.3
- Dolby Sound Effect
- Fixed bug with viewing missed, now the error gets out
- Fixed a bug with the engineering menu, now there are all the items
- Fixed bug in Contacts, merge text with background
- Slightly increased the size of the Action Bar in applications
- Removed from the game Easter eggs
- Added standard E-mail client
- New boot animation
We welcome any donations that will go to pay for hosting for the site, HERE or HERE. Use Google Chrome for translation.
Alice Project v.7.2
- Translation dialer on Russian / Ukrainian languages
​​- Fixed graphics on trifles
- Corporate Image
- Settings - Remove Category Wireless Networks (points remained, removed only the inscription)
- Added advanced menu reboot
- Changing the shutter (there is a problem with turning off Wi - Fi, what would turn it off from the blinds need to push a little to the left of the switch)
- 5th PlatLogo with android (repeatedly click on the Android version
- Fixed icon SMS to Contacts
- Contacts button in the dialer now opens the contacts you, the ones that are installed
- Added Google Music Player
Alice Project v.7.1
- The most important thing is fixed ability to edit the access point APN
- adjust the schedule in the system and in the status bar
- The status bar changes the color of the action bar in some applications. As in Android 5.0
- New application for SMS that can send sms from both SIM
- New contacts who can see SIM contacts
- Fixed settings icon in the curtain when you
Alice Project v.7.0
- Substituted Service on stock, only slightly amended by Design
- Replace the calculator on a more convenient
- Returned dialer with Alice Project v.6.2 style 5th android
- Changes in the curtain (removed unnecessary switches from quick settings)
- Added a fix time zones
- Translation in some places
- The keyboard is no longer flies in landscape mode
It seems everything.
Posing with Wipe System.
To improve performance, the security patches.
Cyanogen Mode v.11 Beta 1
Works:
Wi - Fi
Bluetooth
Camera photo only
Audio in speaking and listening to music through headphones and through the speaker
RAM enough, it does not "evaporate"
Threads after installation threads wait until the eject application error "Themes", then you can safely apply the theme
ART works full
What does not work:
There are unexpected restart
The camera does not record video
Video with hardware decoding, only through the application using their codecs
USSD requests for some operators
Shows that one processor core operates at a maximum frequency, maybe it's just a mistake statistics
It seems everything.
Test this ROM.
Lenovo p780 8gb
Stympy, its work for lenovo p780 8gb version??. thanks & detail please :good:
haahaaah said:
Stympy, its work for lenovo p780 8gb version??. thanks & detail please :good:
Click to expand...
Click to collapse
Hi. Yes it works on 4 Gb and 8 Gb phones.
Can this be flashed through LiFe rom?
KylesIan said:
Can this be flashed through LiFe rom?
Click to expand...
Click to collapse
This is Chinese based ROM. Life v.1.2 is ROW. So... No it cannot be flashed over Life v.1.2.
Sent from my SMT TAB 704DC using XDA Free mobile app
From what ROM can I flash it?
KylesIan said:
From what ROM can I flash it?
Click to expand...
Click to collapse
Please go to the link. I can see that the link provided contains the Stock Chinese ROM that is to be flashed using SP Tools before flashing this Custom ROM using Recovery
Okay thanks for that. Just another question; my sim works perfectly with my ROW S227 rom, would it still work with a Chinese rom?
KylesIan said:
Okay thanks for that. Just another question; my sim works perfectly with my ROW S227 rom, would it still work with a Chinese rom?
Click to expand...
Click to collapse
Hi. Do a backup to your modem software and restore after flash.
Sent from my SMT TAB 704DC using XDA Free mobile app
stympy said:
Hi. Do a backup to your modem software and restore after flash.
Sent from my SMT TAB 704DC using XDA Free mobile app
Click to expand...
Click to collapse
How do I do that? Sorry for all the questions.
KylesIan said:
How do I do that? Sorry for all the questions.
Click to expand...
Click to collapse
Go to magazine play look for ZipME app. Install that app and with it do a backup to folders /system/etc/mddb and
/system/etc/firmware.
The file creeated is your modem software backup.
Flash your custom ROM and then reflash your modem.
Good luck.
Sent from my SMT TAB 704DC using XDA Free mobile app
Can some one help me with these ?
I really look forward to install this ROM on my P780 which is currently running on ROW_S227 Firmware. Before attempting to install this ROM Here is some information i seek. I hope some one here is resourceful enough to help me out.
1. Is it safe to flash P780_S308_130814 STOCK FIRMWARE over my existing ROM which is a rooted S227_ROW ?
2. My phone was manufactured in March 2014, i tried to flash some Chinese firmware in the past but some how the phone simply wont boot after that. Any issues whats wrong here ?
3. After installing this ROM does it use internal memory as default or the external SD card as default. If its external then is there a way we can swap them. I have a 8GB version so really don't want to waste the internal memory.
anilyarki said:
I really look forward to install this ROM on my P780 which is currently running on ROW_S227 Firmware. Before attempting to install this ROM Here is some information i seek. I hope some one here is resourceful enough to help me out.
1. Is it safe to flash P780_S308_130814 STOCK FIRMWARE over my existing ROM which is a rooted S227_ROW ?
2. My phone was manufactured in March 2014, i tried to flash some Chinese firmware in the past but some how the phone simply wont boot after that. Any issues whats wrong here ?
3. After installing this ROM does it use internal memory as default or the external SD card as default. If its external then is there a way we can swap them. I have a 8GB version so really don't want to waste the internal memory.
Click to expand...
Click to collapse
Hi. Answer:
1. it is safe to flash because this chinese ROM i uploaded is flashing with Flash Tool and flash tool will erase your existing ROM. Now because you say that your phone is 8Gb you must find a KK or JB stock ROM for your phone and update till KK last version. What i uploaded is for 4Gb phones.
2. because your phone is made in 03.2014 you must use the new preloader. You will find here. Replace the original preloader with this one and will work.
3. internal memory will be default.
This rom dont have toggle notification shortcut??
Or i miss something on setting??
Hi...
Does 3g switch work on this rom... If yes, I would like to try... TQ
Hi guys
Just installed Alice Project Reborn 8.1.
Works very well...........
Installed S308 with Carlive Recovery and then installed Alice Project 8.1 reborn ...
ROm can be downloaded from alice project website which is in Russian
Got decent Antutu Score of 16400 or so
---------- Post added at 05:20 PM ---------- Previous post was at 04:51 PM ----------
cupliz said:
This rom dont have toggle notification shortcut??
Or i miss something on setting??
Click to expand...
Click to collapse
slide down and click on human figure
some screenshots
HI stympy.. tested alice projects from V7 to 8.1
antutubenchmark not more than 16500 in any case... row s228 also gives more or less same
see the screenshots...
tried to install CM11 cant install
any comments ? suggestions ?
Salve
hy sympy, can you upload Alice project v 7.5, and Alice Reborn v8.1.
I can't acces the official links, from alicerom.ru (https://yadi.sk/d/kHwnhjBlevpU7). Am incercat cu toate browserele din dotare....... Nu merge din updateul OTA la niciuna dintre verisuni. Multumesc anticipat si ii cer scuze penru deranj.
I send a message on alice forum and now is working. At least Alice Reborn v8.1.

CyanogenMod 13 Nightlies are now available for the Nexus 10

Hey all,
As I don't develop CyanogenMod or work for their team, I didn't think it'd be right to make a post in the Development sub-forum. Anyway, I came across a post over on Android Police stating that CM 13 Nightlies are now availble for 'manta'. I've downloaded the latest Nightlie and flashed it on my Nexus 10 along with the lastest Gapps, and everything works great. You can find the Nightlies here. All credit goes to the CyanogenMod team for keeping our Nexus 10 alive!
In my case the gapps are too big (even micro and nano) while pico gets successfully flashed but then Google Play Services crash all the time.
Did you flash the very first nightly from Jan 9?
I have the same issues: nano gapps too large for system, can't install this way... any solutions?
Edit: pico gapps work, no issues so far
I can't even install the pico gapps. Which package did you use OP?
Edit: Tried again with a full wipe and it worked using the pico-apps. Have had no crashes of any Google services so far. I used the latest CM nightly to flash.
rxzlmn said:
I can't even install the pico gapps. Which package did you use OP?
Edit: Tried again with a full wipe and it worked using the pico-apps. Have had no crashes of any Google services so far. I used the latest CM nightly to flash.
Click to expand...
Click to collapse
Did it fail with the nightly from Jan 9 but then succeeded witht he nightly from today (Jan 10)?
Dimitris CH said:
Did it fail with the nightly from Jan 9 but then succeeded witht he nightly from today (Jan 10)?
Click to expand...
Click to collapse
I used the newer one both times. Only difference was full wipe.
I'm having zero luck on getting Google Play Services installed. Tried the nano, now the Pico. Same as above users, the install will go just fine but will give me crashes every second on screen.
I read here and there that this crash on CM13 (other devices) can also be caused by a) Privacy Guard settings for Google Play services, or b) allowing Google Play Services to access "Phone" and "Contacts" or something to that effect.
Still playing around trying to get this to install.......
Edit: Did a full wipe of everything, including System/Data, and it all works now. I'm all setup! I'm getting an error on Google "Now on Tap", saying "The app has stopped" everytime I try to use it. I remember seeing the fix somewhere about something in Accessibility settings. But I'm having no luck remembering what it was or finding the fix again.
DTB
Google play services were not working for me at first either. I decided to try and sideload the latest Google Play Services apk to see if would fix the problem. Thankfully, it did fix it. You can find the apk file here.
Install Opengapps nano or pico http://opengapps.org/ and full wipe before install.
http://review.cyanogenmod.org/#/c/127116/
Anyone tried enabling f2fs?
Good news, finally got "Now on Tap" working.
I went to settings. I searched for "Assist", and selected "Assist and Voice Input".
(I honestly can't find in the settings where it is, I can only find it by searching within settings.)
The "Assist App" was set to "Google App". I selected "None", then went back and set it to "Google App" again...and all was good!
So, looks like I am finally up and running. Another note; the Marshmallow apps restore didn't seem to restore for me. I even used my phone to setup my account, all was linked fine. It got my identity and set it, but did not restore any apps. Not a huge deal.
DTB
viruszzz said:
Install Opengapps nano or pico http://opengapps.org/ and full wipe before install.
Click to expand...
Click to collapse
I guess you did not read the part where we said that this is exactly what we did.
1GB RAM
I succesfully installed CM13 with Opengapps pico and its running very smooth so far. But in settings it's showing me that I only have 1GB of RAM instead of 2GB. Did anyone else notice this?
Edit: 1,1GB to be exact. Very strange.
Edit 2: I read in another thread that about 900MB is reserved for the GPU so that's probably why it is showing just 1,1GB for the system.
Hei, ref doing a full wipe, is that before doing the pico gapps install, and exactly what is meant by full wipe? Thanks
Cintra2 said:
Hei, ref doing a full wipe, is that before doing the pico gapps install, and exactly what is meant by full wipe? Thanks
Click to expand...
Click to collapse
Yes before installing Pico. I did a wipe after too, just to be sure. A full wipe means cache and system/data. If you have TWRP a normal wipe includes all of this.
MisterT200 said:
Yes before installing Pico. I did a wipe after too, just to be sure. A full wipe means cache and system/data. If you have TWRP a normal wipe includes all of this.
Click to expand...
Click to collapse
Many thanks for your quick reply, now I'll give it another go
Mvh
PS That did the job All working very well now!
Does CM13 support loop device?
I need to run linux chroot (via linux deploy); that requires that the ROM supports loop device. Request to those who have successfully install CM13 on N10: Could you install the free app "loop device checker" and check to see if loop device is supported?
THANKS!
ps. This app is free and useful but it has annoying loud music; mute the speaker first
After installing CM13, my Nexus10's rotation doesn't work.
When I used stock lollipop, rotation worked perfectly.
Even if I update to the newest version, it's the same here. (cm-13.0-20160129-NIGHTLY-manta)
Does anyone have the same problem?
Cintra2 said:
Many thanks for your quick reply, now I'll give it another go
Mvh
PS That did the job All working very well now!
Click to expand...
Click to collapse
Hey, down the page, you should be able to fit bigger packages than pico on there.
http://forum.xda-developers.com/nexus-10/development/rom-aicp-11-manta-t3280678/page18#post65047967
Youtube 1440p videos
For some reasons with the 02/09/2016 release I'm able to run YouTube video at 1440p, but after updating to newer releases it isn't the case anymore, instead I have the same problem as with Google's official releases the videos run for 1s then stops while the audio still runs normally.

Categories

Resources