OK. As far as I know.... This is so far the Only method to UNBRICK Galaxy S3.
1. Purchase a USB Jig Dongle For Samsung Galaxy S III S3 GT-I9300 Download Mode unbrick
http://www.youtube.com/watch?v=TrZUrE5Nqj0
2.This USB jig can only bring your phones into Download Mode. It CANNOT reset your phone binary counter and remove yellow triangle..
3.Usage:
1. Turn off your phone and pull out the battery for about 10-15 seconds.
2. Just put the battery back and don’t turn it on.
3. Plug the USB Jig into the micro USB port on the phone.
4. After about 2-3 seconds, you can see the yellow download mode logo on the screen.
5. Unplug the USB Jig.
6. Connect your phone with USB cable to computer and then flash your phone via the program “odin"
It does not work with latest European Version 2.34, you have to return your device to old version to use.
NDUTU said:
Why dont you GURUS open a thread of HOW TO UNBRICK GALAXY S3.
What are all the components and hardware needed and a how to tutorial....
Click to expand...
Click to collapse
Sounds like someone bricked their phone.
|Trolling With A Smile|
Jamin13 said:
Sounds like someone bricked their phone.
|Trolling With A Smile|
Click to expand...
Click to collapse
NO, dont go so fast, I just want to learn...
How to unbrick galaxy s3
OK. As far as I know.... This is so far the Only method to UNBRICK Galaxy S3.
1. Purchase a USB Jig Dongle For Samsung Galaxy S III S3 GT-I9300 Download Mode unbrick
http://www.youtube.com/watch?v=TrZUrE5Nqj0
2.This USB jig can only bring your phones into Download Mode. It CANNOT reset your phone binary counter and remove yellow triangle..
3.Usage:
1. Turn off your phone and pull out the battery for about 10-15 seconds.
2. Just put the battery back and don’t turn it on.
3. Plug the USB Jig into the micro USB port on the phone.
4. After about 2-3 seconds, you can see the yellow download mode logo on the screen.
5. Unplug the USB Jig.
6. Connect your phone with USB cable to computer and then flash your phone via the program “odin"
It does not work with latest European Version 2.34, you have to return your device to old version to use.
Software bricking is nearly impossible, if getting bootloops or only booting into recovery there is in most cases the way about using odin to flash back to stock
And there is already a thread about changing a broken screen, use the search
kirE_2o1o said:
Software bricking is nearly impossible, if getting bootloops or only booting into recovery there is in most cases the way about using odin to flash back to stock
And there is already a thread about changing a broken screen, use the search
Click to expand...
Click to collapse
Hardware unbrick
NDUTU said:
Hardware unbrick
Click to expand...
Click to collapse
Might be good to note that the jig method will only work on a softbrick.
Hardbricked phones need either a replacement or a JTAG treatment.
Sent from my tricked out AOKP GT-I9300
S3
Jamin13 said:
Sounds like someone bricked their phone.
|Trolling With A Smile|
Click to expand...
Click to collapse
I have a S3 Gt-I9305, what version is this. I see there are so many versions and am having a problem with the phone.
thanks
Rich32 said:
I have a S3 Gt-I9305, what version is this. I see there are so many versions and am having a problem with the phone.
thanks
Click to expand...
Click to collapse
The version that has I9305 Q&A forum right next to this forum .
Why hijack a thread that is dead for nearly a year ??
jje
spamcakes said:
Might be good to note that the jig method will only work on a softbrick.
Hardbricked phones need either a replacement or a JTAG treatment.
Sent from my tricked out AOKP GT-I9300
Click to expand...
Click to collapse
Actually, with the gs3 all you need is a 16gb class 10 sd card with a debrick.img.... the usb jig makes it easier so you dont have to press all the buttons or hook it up to the computer to get to DL mode... check out my last post on the unbrick your sprint gs3 thread...
!Led*Eyes! said:
Actually, with the gs3 all you need is a 16gb class 10 sd card with a debrick.img.... the usb jig makes it easier so you dont have to press all the buttons or hook it up to the computer to get to DL mode... check out my last post on the unbrick your sprint gs3 thread...
Click to expand...
Click to collapse
Thread resurrect, much?
Good news that this is all you need now but as far as I know the information was correct as of the posting date in 2012.
Anyway I have moved on to the LG G2 now, my s3 was stolen
spamcakes said:
Thread resurrect, much?
Good news that this is all you need now but as far as I know the information was correct as of the posting date in 2012.
Anyway I have moved on to the LG G2 now, my s3 was stolen
Click to expand...
Click to collapse
Oh wow! I guess thats what happens when posting in 2 similar threads simultaneously haha.. Blast from the past??? haha
Related
So I was trying to root new Galaxy s2.. long story short, I think I hard bricked it.
The device won't power up; or at least the screen won't show anything.
I can't get to Download Mode.
Is there anyway I can save my new 400 dollar investment?
How are you trying to get into download mode ? Hold the volume down, home button and the power button at the same time. When you get the Samsung screen, release the power button but keep holding the volume down/home buttons until you get into download mode.
If you really can't get into download mode your options are:-
1) Get a jig. This would be your last chance to get into download mode before sending it off for repair.
2) Find someone near you who does JTAG repairs. This option will be cheaper than paying for Samsung to repair your phone.
3) Return the phone to Samsung. As you've tried to root the phone, there's a fair chance you'll end up paying for said repair as this voids your warranty. On the other hand you might be one of those people who get lucky and Samsung fixes your phone under warranty regardless. A roll of the dice essentially.
Edit - Remove your battery & leave it out for a minute or so before trying to get into download mode.
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Hehehehe ;-) Damn that brought back memories Uridium. I used to do that with Sega Mega Drive cartridges. However, I'm not sure we should be suggesting same on here. Not exactly ethical and bordering on fraud tbh
uridium_uk said:
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Click to expand...
Click to collapse
Looking at JIGS on Ebay, I'll probably get one from there.
So how would I use that?
Plug it in to get to Download Mode then take it out and plug in USB connection to my PC?
I'm still unaware of which correct firmware to put it, so this is so scary :[
uridium_uk said:
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Click to expand...
Click to collapse
Haha I will try the JIG method first.
But thanks for the devious idea ;]
Yep. Look for "Samsung Galaxy S2 download mode jig" or something like that on eBay. Shouldn't be more than a few bucks. When you get it, make sure the phone is off, plug the jig in the usb port & if you're lucky the phone will boot into download mode. Yeah, once you're in download mode, remove the jig, plug a USB cable in/connect to your PC then flash your firmware of choice via Odin.
We can worry about which firmware to flash once you're able to get it to boot with a jig tho. Post back here when you get it & then we can work out which firmware to go with.
johnnysyeah said:
Looking at JIGS on Ebay, I'll probably get one from there.
So how would I use that?
Plug it in to get to Download Mode then take it out and plug in USB connection to my PC?
I'm still unaware of which correct firmware to put it, so this is so scary :[
Click to expand...
Click to collapse
MistahBungle said:
Yep. Look for "Samsung Galaxy S2 download mode jig" or something like that on eBay. Shouldn't be more than a few bucks. When you get it, make sure the phone is off, plug the jig in the usb port & if you're lucky the phone will boot into download mode. Yeah, once you're in download mode, remove the jig, plug a USB cable in/connect to your PC then flash your firmware of choice via Odin.
We can worry about which firmware to flash once you're able to get it to boot with a jig tho. Post back here when you get it & then we can work out which firmware to go with.
Click to expand...
Click to collapse
Thanks for your help! The JIG should arrive by Friday. Till then.. back to my iPhone 3G, yuck.
Hey I have an idea, why don't you tell us how you think you bricked your phone.
Because, for example, if you've flashed a bad Kernel then your phone may seem bricked (it has all the characteristics) but can be recovered by someone who knows what to do. Likewise, if you were flashing something with Odin and you had a sudden spasm attack and pulled the USB out, you've bricked your phone. Tell us what you did and we can give a proper reply.
EDIT: If the phone is only soft bricked and you can get into DL mode with a JIG, you go can it without one.
postfatal said:
Hey I have an idea, why don't you tell us how you think you bricked your phone.
Because, for example, if you've flashed a bad Kernel then your phone may seem bricked (it has all the characteristics) but can be recovered by someone who knows what to do. Likewise, if you were flashing something with Odin and you had a sudden spasm attack and pulled the USB out, you've bricked your phone. Tell us what you did and we can give a proper reply.
EDIT: If the phone is only soft bricked and you can get into DL mode with a JIG, you go can it without one.
Click to expand...
Click to collapse
Well, first I was using odin to root it by changing the kernel. But I think I was using the wrong version and then I got "firmware is wrong. Please select recovery mode in kies and try again."
Then I tried to put back 2.3.4 and that's where I think went wrong. I unplugged the phone because it was just stuck with Odin on for over 10 minutes.
Then now I can't even turn it on.
Sent from my ADR6400L using Tapatalk
If Odin hadn't finished its business and you unplugged your phone then yea, you've probably bricked it. Cases like these is why I never use Odin, its beta software which even the developers don't fully understand how it works. Even if through no fault of your own, Odin can fail, and that leaves you pretty well ****ed. Try the JIG, you may have unplugged it when it wasn't flashing something important, but yea, I'd start making up a really good excuse to get a new phone.
postfatal said:
If Odin hadn't finished its business and you unplugged your phone then yea, you've probably bricked it. Cases like these is why I never use Odin, its beta software which even the developers don't fully understand how it works. Even if through no fault of your own, Odin can fail, and that leaves you pretty well ****ed. Try the JIG, you may have unplugged it when it wasn't flashing something important, but yea, I'd start making up a really good excuse to get a new phone.
Click to expand...
Click to collapse
If the JIG is able to get it to go to download mode, would that mean for sure I can fix the phone?
And if the JIG cannot bring it to download mode, am I screwed with this phone?
If you do manage to get into download mode your phone can be saved otherwise yeah you are pretty much screwed
Sent from my GT-I9100 using Tapatalk
RorixRebel said:
If you do manage to get into download mode your phone can be saved otherwise yeah you are pretty much screwed
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
*crosses fingers* for the JIG then...
i just cant understand how people break their phones like this?
If you dont know what your doing theres a good reason not to flash your phone right there.
Saying that... i hope the jig works for you.
Vivasanti said:
i just cant understand how people break their phones like this?
If you dont know what your doing theres a good reason not to flash your phone right there.
Saying that... i hope the jig works for you.
Click to expand...
Click to collapse
I do all my rooting and modding just fine for my HTC Thunderbolt. I was being careless and wasn't thinking about this carefully yesterday.
This is why we have xda with all its great users and help.
I had problems with my sgs2 when i first got it and my problem was solved with a different usb cable. I was using a cheap usb cable and when i tried an original worked a treat.
Just a thought if ya get it yo power up again.
Sent from my GT-I9100 using XDA App
Unbrick without Jig
johnnysyeah said:
I do all my rooting and modding just fine for my HTC Thunderbolt. I was being careless and wasn't thinking about this carefully yesterday.
This is why we have xda with all its great users and help.
Click to expand...
Click to collapse
Well it might be possible to Unbrick your phone without Jig, but solution has not worked for 100% user, though it has worked for me(I'm not sure it was hard brick). So here are the steps:
1- Start Odin
2- Attach the USB cable to the PC (DO NOT ATTACH IT TO THE PHONE)
3- Press and hold "Volume up" and "home" buttons
4- Attach the USB cable to the phone while holding both buttons
5- The phone will enter in download mode
Just flash the stock kernel after that.
And don't forget to THANK me if it works
sumitpathak said:
Well it might be possible to Unbrick your phone without Jig, but solution has not worked for 100% user, though it has worked for me(I'm not sure it was hard brick). So here are the steps:
1- Start Odin
2- Attach the USB cable to the PC (DO NOT ATTACH IT TO THE PHONE)
3- Press and hold "Volume up" and "home" buttons
4- Attach the USB cable to the phone while holding both buttons
5- The phone will enter in download mode
Just flash the stock kernel after that.
And don't forget to THANK me if it works
Click to expand...
Click to collapse
I'd tried this before, but no luck.
In fact, that was the only way I was able to get to download mode.
But thanks for your advice
Sent from my ADR6400L using Tapatalk
johnnysyeah said:
I'd tried this before, but no luck.
In fact, that was the only way I was able to get to download mode.
But thanks for your advice
I dont really understand this as download mode requires Vol Down + Home + Pwr
Vol up is for recovery .
jje
Click to expand...
Click to collapse
help me,
i tried all method on this forum nothing was working...
first at all my phone cant use charger...i dont know what happen...i try others charger still same...i have both phone i9100 and i9100G but the G version giving me headache!
i wanted to send my phone to service centre due im still on warranty but..my binary counter doest reset...when i put the usb jig after flash patch my phone not boot up to download mode..and reset...its do nothing...what can i do...
but my combo 3 button still working if i flash using my pc...only USB jig not working..please help...
1. If 3 combo button working upgrade to ICS, Then download triangle away. Check the flash counter number matches your count and run the app.
2. Or try flashing the old bootloader. Then use the USB jig.
Sent from my GT-I9100 using Tapatalk 2
I9100G have no ICS yet...so cant using triangle away...
using the old boot loader...i already tried...but not working or im doing wrong..?
im stuck...my phone cant charge...and binary counter still got..how to send to samsung..
Have you tried the USB jig on another phone. Just read on internet they are releasing ICS for the I9100G.
Sent from my GT-I9100 using Tapatalk 2
You might get lucky
I had a similar problem i atempted my first rom install ever when we had a powercut my phone gave me connect to kies message i had no cwm no bootloader however i still sent my phone away as they had agreed to fix for me in the first place thankfully even though they never fixed the physical damage caused by their packaging skills and a combo of royal mails handling it they were good enough to fix my software problem without charge to myself. I think because they couldnt access the flash counter they were forced to put new firmware on either way big thanks to them i finally got ics on my phone.
They have however since had my phone back and fixed all above physical probs again cheers to them they were either sympathetic with rom or just did it anyway.
Just thought id pop my experience with you
Physical damage is 1st thing should have been fixed
bored_stupid said:
Have you tried the USB jig on another phone. Just read on internet they are releasing ICS for the I9100G.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
ICS just release for China phone only...not offical release all those news on internet spread that ICS already come to I9100G is totaly nonsense..
hmm..i might try sending out...but after they checking if my binary counter not 0 they will automatic void my warranty forever?
are2power said:
help me,
i tried all method on this forum nothing was working...
first at all my phone cant use charger...i dont know what happen...i try others charger still same...i have both phone i9100 and i9100G but the G version giving me headache!
i wanted to send my phone to service centre due im still on warranty but..my binary counter doest reset...when i put the usb jig after flash patch my phone not boot up to download mode..and reset...its do nothing...what can i do...
but my combo 3 button still working if i flash using my pc...only USB jig not working..please help...
Click to expand...
Click to collapse
I9100G can't charge, and cannot get into download mode via jig, but CAN get to download mode via 3 button combo?
Sounds like the USB port is broken.
Since it's the I9100G, as you have discovered, there is no reliable ICS released for the I9100G yet, so you cannot use Triangle Away. And without a working USB port, the jig will not work.
However, you can replace that part for a relatively small cost from what I understand.
ctomgee said:
I9100G can't charge, and cannot get into download mode via jig, but CAN get to download mode via 3 button combo?
Sounds like the USB port is broken.
Since it's the I9100G, as you have discovered, there is no reliable ICS released for the I9100G yet, so you cannot use Triangle Away. And without a working USB port, the jig will not work.
However, you can replace that part for a relatively small cost from what I understand.
Click to expand...
Click to collapse
r u sure about this???im afraid if i go...later they will say got this broken..this one broken...got many broken part..hmmm...
are2power said:
r u sure about this???im afraid if i go...later they will say got this broken..this one broken...got many broken part..hmmm...
Click to expand...
Click to collapse
Look, I can't possibly be sure, because you have the phone in front of you. I can't see it, so I don't know what exactly is broken. But the symptom you describe sounds like the usb post is broken. Others have ordered the usb port part and replaced it themselves for about $13 USD.
But if you are this unsure, I'm guessing you are probably either not willing or not capable (not trying to insult, just stating facts) of doing this on your own.
If that's the case, I think you don't have any other choice other than to just send it to Samsung. But there is no other way for you to reset the counter... So warranty will probably be denied.
ctomgee said:
Look, I can't possibly be sure, because you have the phone in front of you. I can't see it, so I don't know what exactly is broken. But the symptom you describe sounds like the usb post is broken. Others have ordered the usb port part and replaced it themselves for about $13 USD.
Click to expand...
Click to collapse
I might trying this method btw thanks for your information
Sent from my GT-I9100 using Tapatalk 2
just to update
If you can three buttn combo an fix try triangleaway ittl reset yello triangle go playstoree
read descriptio all ovvit lol there a speciel link lol
Pasted from nuvva thread me lazy lol
This
Sorry was there even a reason to bump this thread?http://forum.xda-developers.com/show....php?t=1494114explains everything about triangleaway and you can even download the apk from there for free.
linuxnubee said:
If you can three buttn combo an fix try triangleaway ittl reset yello triangle go playstoree
read descriptio all ovvit lol there a speciel link lol
Pasted from nuvva thread me lazy lol
This
Sorry was there even a reason to bump this thread?http://forum.xda-developers.com/show....php?t=1494114explains everything about triangleaway and you can even download the apk from there for free.
Click to expand...
Click to collapse
Triangle away only works for ICS, which isn't available yet for the i9100G.
i try Triangle away is not working for ICS i9100G india...something pop up " Magic Header not incompletetable" ...
are2power said:
i try Triangle away is not working for ICS i9100G india...something pop up " Magic Header not incompletetable" ...
Click to expand...
Click to collapse
Are you rooted yet? TriangleAway requires root.
yes im rooted...maybe Triangle Away not compitable yet with i9100G....
suddenly i decide to send my phone to samsung eleteronics...they take my phone w/o asking me w/o checking my binary anything...they change my usb board...plus they upgrade my firmware to ICS..and they CLEAR my binary counter as well...lucky me.!!lol...
i have just flashed it with the wrong Sofware (by accident) and it wasnt working so i disconnected it now it wont boot and wont go into recovery mode or download mode please help????
Sounds like a hard brick, there isn't a way to recover it. Out of interest what software did you flash? Was it just a wrong package or was it software that was designed for a different phone? There might be a minor chance of recovery depending on what went wrong. (But don't get your hopes up)
it was my dads galaxy s2 and the original software for my galaxy s i hope there is a way to unbrick it would it help if i said i didn't root it before i started i forgot and went straight into it ??
That's a pretty bad mistake... The only way you could possibly recover it is if you buy a USB Jig and give that a try. Otherwise I'm afraid your up **** creek without a paddle.
Jig
Seems u have Bricked your Device Use USB Jig to UnBrick it
1. USB jig to force into download mode
2. Key combo (Vol down + home + power) and then immediately connect to PC via USB, or try at same time
3. JTag repair
4. Samsung repair
Sent from my GT-P6810 using XDA Premium HD app
You did a big mistake, you can only use a USB jig and hope the cell reboot!
You can buy a USB JIG from Amazon using the following link:
http://www.amazon.com/s/ref=nb_sb_n...d-keywords=usb+jig&x=0&y=0&tag=011080bfcam-20
Or you can even make your own USB JIG. Here is a useful video that shows you how to make a a USB JIG
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
thanks all who helped i have ordered a JIG off of eBay will be here Monday or Tuesday. i was just wandering if a JIG didn't work how do you use a JTAG ??
callum94 said:
i was just wandering if a JIG didn't work how do you use a JTAG ??
Click to expand...
Click to collapse
You'll need to send it to someone who owns one. Will usually be cheaper than Samsung.
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
Sent from my GT-I9100 using xda premium
A JIG won't ever help in these situations. JTAG is the only solution left.
A JIG is to force a phone to download mode with a WORKING bootloader. You messed up the whole phone my flashing a I9000 fw, including the bootloader.
the battery gets hot when i charge it i plug in the jig and the battery goes flat anything there??
callum94 said:
the battery gets hot when i charge it i plug in the jig and the battery goes flat anything there??
Click to expand...
Click to collapse
Did you read Phistachio's response just 1 post up? It was:
Phistachio said:
A JIG won't ever help in these situations. JTAG is the only solution left.
A JIG is to force a phone to download mode with a WORKING bootloader. You messed up the whole phone my flashing a I9000 fw, including the bootloader.
Click to expand...
Click to collapse
So there is only option numbers 3 and 4 from my first post afraid. I have given you the link for Jtag....
Sent from my GT-I9100 using xda premium
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Edit: Samsung service has replaced the mother board!!
Doing the pit partition has resulted in my phone getting bricked!!
So people new to the forum, never do it :laugh:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
CashAndPotatoes said:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
Click to expand...
Click to collapse
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Pradeep said:
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Click to expand...
Click to collapse
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Gediprime said:
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Click to expand...
Click to collapse
If you can access download mode, use it. Try re-flashing your kernel.
nikufellow said:
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Click to expand...
Click to collapse
JIG ???
Gediprime said:
JIG ???
Click to expand...
Click to collapse
Use the search button and use keywords "usb jig". Or google.
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Click to expand...
Click to collapse
I am sorry!! I am new to this forum and the phone being a recent purchase, i was very much desperate!!
I know the answer may not be different and the problem may not be new hence I've asked to guide me to the appropriate thread in my post!! No offence!!
Thanks for your reply. I will be taking the phone to Samsung Service tomorrow.
Gediprime said:
JIG ???
Click to expand...
Click to collapse
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
If you can access download mode, use it. Try re-flashing your kernel.
Click to expand...
Click to collapse
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Gediprime said:
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
Click to expand...
Click to collapse
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Pradeep said:
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Click to expand...
Click to collapse
You are misinterpreting what you read. What you're referring to is resetting the binary counter, and no it doesn't work on ICS bootloader however it still works for putting device into download mode (unless its bricked).
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
"Soft-brick" has absolutely no meaning, Your device is either "bricked" or it isnt. Its a made up term by n00bs when they cant get system to boot normally. Your devcie is only bricked when it wont power on or go into useable recovery+download modes. If you can simply use a jig or go directly into flashing a rom then your device is not bricked.
The "bricked" term is used far too loosely nowadays.
Pradeep said:
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Click to expand...
Click to collapse
Your phone died? you kiding ?
I'm using the leak version of Sammobile since 3 weeks... Why do you think the phone make a bad reaction now? why now?
Ok, you try to flash OFW and don't result. and then you flash again the XXLSJ ? and the phone colaspe?
What kind of roms do i flash? OFM or CFW ? ICS or JB ?
Well if a can connect with ODIN of course
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Pradeep said:
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Click to expand...
Click to collapse
Yes its possible which is the reason we already mentioned to try it
It all depends on the actual base issue though as to whether it will work. Its worth a try either way though, They only cost £1-2 or you can make them yourself if you have the spare parts. (Don't ask how, Use search).
I have tried the JIG, but no luck!!
I have given the phone to Samsung Service.
Hope they fix it!!
Will they use JTAG or it has to be done somewhere else in case Samsung people refuse to do it??
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
nikufellow said:
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
Click to expand...
Click to collapse
Thanks!! Well I did act dumb there!! Said I downloaded a game Royal Revolt (~200 MB), the phone got heated, blah blah blah......
Well I did not tell about firmware upgrade via kies and all....
Only thing that I can do now is wait and hope!!:laugh:
Hi everyone!
I'have a bricked SGS2 from t-mobile. I can't tell exactly what has been flashed to it before, because it wasn't done by me. After flashing a rom it's bricked.
At the moment I can't get it into download mode or turn it on. The screen is black.
Things I've tried and they didn't work:
1. Charge the battery in case it's disscharged. (the phone is charging the battery, but there are no indication lights)
2. Remove battery>press vol up and vol down>insert usb cable.
3. I bought a usb jig and it also doesn't work. ( I followed all instruction how to get it work)
4. When I connect the phone to the PC (with battery or without it) the PC offers me to format the drive I inserted, and every 5 seconds the phone drive gets disconected and connected again after each time windows offers me to format the drive.
5. When I press the power button- nothing happens.
Anyone could help me? Has anyone sorted this kind of problems?
unfortunately you need a JTAG device to let you know if the problem is with the files or hardware.
The JTAG will fix software issues. Hardware issues may require you to replace the motherboard.
If you bought a device knowing it was bricked, why don't you used for parts instead of paying money to fix a device that may or may not work after repairs.
Cosmic Blue said:
unfortunately you need a JTAG device to let you know if the problem is with the files or hardware.
The JTAG will fix software issues. Hardware issues may require you to replace the motherboard.
If you bought a device knowing it was bricked, why don't you used for parts instead of paying money to fix a device that may or may not work after repairs.
Click to expand...
Click to collapse
I have't bought the device, I'm helping to my friend to get the device allive.
arturik70 said:
Hi everyone!
I'have a bricked SGS2 from t-mobile. I can't tell exactly what has been flashed to it before, because it wasn't done by me. After flashing a rom it's bricked.
At the moment I can't get it into download mode or turn it on. The screen is black.
Things I've tried and they didn't work:
1. Charge the battery in case it's disscharged. (the phone is charging the battery, but there are no indication lights)
2. Remove battery>press vol up and vol down>insert usb cable.
3. I bought a usb jig and it also doesn't work. ( I followed all instruction how to get it work)
4. When I connect the phone to the PC (with battery or without it) the PC offers me to format the drive I inserted, and every 5 seconds the phone drive gets disconected and connected again after each time windows offers me to format the drive.
5. When I press the power button- nothing happens.
Anyone could help me? Has anyone sorted this kind of problems?
Click to expand...
Click to collapse
T-mobile USA, or T-mobile Europe?
If you're asking about the Galaxy SII from T-mobile USA, then you're in the wrong forum.
ctomgee said:
T-mobile USA, or T-mobile Europe?
If you're asking about the Galaxy SII from T-mobile USA, then you're in the wrong forum.
Click to expand...
Click to collapse
Hmm... Sorry, but it's t mobile USA
arturik70 said:
Hmm... Sorry, but it's t mobile USA
Click to expand...
Click to collapse
Then you want to be here, instead.
There are significant hardware differences between the T-mobile USA Galaxy SII (SGH-T989) and the device this forum is for. (GT-I9100)
ctomgee said:
Then you want to be here, instead.
There are significant hardware differences between the T-mobile USA Galaxy SII (SGH-T989) and the device this forum is for. (GT-I9100)
Click to expand...
Click to collapse
Thanks for your response. Could the brick be caused by flashing GT-I9100 rom or kernel on it?
arturik70 said:
Thanks for your response. Could the brick be caused by flashing GT-I9100 rom or kernel on it?
Click to expand...
Click to collapse
Absolutely, yes. ROMs and kernels are NOT compatible between the two devices.