Related
Hi, I have a HTC Pro for sprint, I love everything about it except the battery cover and volume buttons.
The cover creaks, and makes a ton of sound if I try to use the keyboard, one corner is loose, and I believe thats where the sound comes from.
Also the volume keys are hard to use and they sound more like creaking plastic, I cant even tell when it is actually clicking.
Anyone else have this problem? Mine has been like this since day 1.
Any fixes?
I was about to say "Perhaps you have a defective machine, as I also have a Touch Pro from Sprint and have not really noticed this problem" and then I picked it up... top corner as in the back cover right behind about where "Sprint" is printed on the front? Mine actually makes creaky noises there, too... with a bit of push.
I honestly don't notice the noises when I am typing with it, simply because I'm used to keyboards clicking, and noises around me, but I do see what you're saying. I have no fixes to offer, since it seems to be manufacturing rather than a joint or something that could do well with a little dab of WD-40 or something. If the noise takes over my mind, though, you are totally to blame.
Just got mine today. It's very pretty. My first note after only a few hours of usage is the top panel/screen slides a bit to easy, the mogul was a bit more tight...
With some well placed paper, I took small pieces and folded it once, on the corners you can make the cover fit better. This has silenced the creak people are talking about.
Considering the backis a peice of plastic that flexes to lock in and come off,
I don't mind the creaking. I'd prefer this than over a heavy piece of steel
with screws holding it in. The phone is heavy enough as it is.
Sure the quality control isnt' fantastic. The buttons on the face are a little raised up.. but not enough for me to be picky about it. The phones nice, I like it, and i'm happy it's pretty darn good.
Mine creeks too...and the power/volume hard keys dont give good feedback and have minimal travel. I feel as though the power button will break soon, especially since it's used so much to wake the phone. The overal construction is much more beautiful than the mogul, but aside from the keyboard buttons, the construction feels more flimsy, and the slider not as smooth as the mogul.
The touch screen seems to be less sensitive too.
Oh well...it's only a very expensive phone...
My cover creeked pretty bad. I cut a business card to fit and put it under the cover. Problem solved.
i fixed this by putting blue painters tape in layers and cutting to the right size and adding one layer at a time and then putting the cover back on then checking the noise. i reapeated this till it no longer creaked. this is not my fix but posted by someone at ppcgeeks and i think i was linked from there too. but the painters tape has a smooth surface on the non sticky side and it helps the battery cover slip on easily and is easily removed if you need to. hope this helps. oh yea the area around the micro sd slot is the main creaking area on mine and i have heard others say the same. it took 3-4 layers there.
tommy11481 said:
i fixed this by putting blue painters tape in layers and cutting to the right size and adding one layer at a time and then putting the cover back on then checking the noise. i reapeated this till it no longer creaked. this is not my fix but posted by someone at ppcgeeks and i think i was linked from there too. but the painters tape has a smooth surface on the non sticky side and it helps the battery cover slip on easily and is easily removed if you need to. hope this helps. oh yea the area around the micro sd slot is the main creaking area on mine and i have heard others say the same. it took 3-4 layers there.
Click to expand...
Click to collapse
I used some thin strip electrical tape 2 layers on the right side next to the camera. "QUITE NOW"
I think its individual defectiveness. My phone creaks only if I put my ear 1 inch away from it when i press the Sprint logo, extremely unnoticeable. It feels much more solid than my last phone, HTC(PPC)6700, the side buttons are all solid and secure and respond well. No tape needed. If this happened to my phone I'd take it back and demand a new one as it retails for 550USD and that sort of defectiveness is unnacceptable. Although my 6700 retailed for 600USD and was much cheaper.
Mine also has a little creek. There isn't much i dislike about this phone besides the lack of working FM at the moment, and most importantly, the performance of 3d applications/games,videos etc.
I'll try the tape thing tonight.
Wow I don't know why I didn't think about putting something behind the cover. I was complaining that mine feels cheap, but I just threw a few post its back there and now it's nice a firm! thanks!
I ordered my first touch pro over the phone, and it felt SO cheap with all of the "symptoms" of what everyone has been saying, but for a different reason I had to exchange it, and the one they gave me at the store feels SO much sturdier.. I am glad I exchanged..
.. my apologies if this not the appropriate place to post this, but I need help..the little battery door/flap that clips into place which holds the actual battery in place and covers the SIM card (not the black battery cover/antenna) has broken!!.. Now whenever the phone drops or is handled rough enough to cause the battery cover/antenna to come off, the battery slides out of place and the phone turns off.. this happens multiple times throughout the day..i'm ready to throw this phone into the far reaches of this galaxy to say the least... if thats not bad enough, the little chrome peice that surrounds the sensor part of the optical trackpad on the front of the phone has fallen out .. it really takes away from the beauty of the phone!.. any idea where I can find replacement parts for these???.. used or new, it doesn't matter ... If ANYONE can help me i'd be indebted to you for ever!!!
Try contacting HTC.. They make the phones and they should know.. And btw.. Handle your phone a little more careful..
Sent from my Legend using XDA App
Damn, i've always been afraid of that happening expirimenting and having to remove the battery frequently. Don't know anything to help you, sorry
I have the same broken part. Been looking around for this part for a while with no luck. HTC want £44 to replace it, only by sending it in for a repair. They will not sell me the part and I cannot find it anywhere.
I will keep an eye on this thread for more suggestions.
Tape? Although it would have to stick to the aluminum unibody. See if it works! My head's imagery seems like it could.
Yes, my Legend is basically held together with tape. Without it, the battery cover comes of very easily. It's been like this for about 6 weeks now.
I've also been in to my local Vodafone shop to see what they say. They will not repair it as it's a moving part.
Buy your Legend a silicone or rubber case. That should prevent black cover from falling off.
Sent from my HTC Legend
why don't u fill the gap between the black part and ur battery with a soft rubber?
i think it'll solve ur problem
I want this part too. The center clip mechanism has failed due to taking the cover off regularly.
Oh my goodness, I should stop switching SIMs every now and then. I'm scared, actually.
branch8 said:
Damn, i've always been afraid of that happening expirimenting and having to remove the battery frequently. Don't know anything to help you, sorry
Click to expand...
Click to collapse
I was thinking of placing a secundairy antenna on that part, so you would stil have an small antena if the lid is missing. or maybe even better reception.
If you still have problems with the battery cover/flap, here's what i did on my legend: Take out the battery, look inside the battery compartment, you'll see the four battery contacts/pins, and right next to them you'll see there is a small black square rubber, glued to a metal spring underneath. The spring is heavily glued to the chassis/plastic body. I took a small (but strong) set of tweezers, and pulled the thing off the phone (the spring + the small rubber attached to it), and my phone works perfectly now, with the broken flap. The thing is that the spring is actually pushing the battery out, for "easier" removal, thus making the battery loose contact/fall out on every shake/impact.
I think that the design of this part is the worst about the legend. On mine I have experienced that the grip is weaker and weaker, and now comes off quite easily (unintended).
Looks like I got one dot on the middle right side, tiny specks on the top right side, and a few more on the top. I also got some light leakage, but that's very, very minor compared to the dust under the screen. I'm kinda OCD about this, so I'm thinking of getting an exchange at Bestbuy..
What about you folks?
You sure its not dead pixels. Anyways, if it bothers you return it. its about customer satisfaction. So what if they look at you strange, you'll be happier and anyways, who cares about them.
Damn why can't HTC get this right! It seems every new HTC phone gets dust under the screen.
Yeah. Hopefully my new TPU case that's coming will block a lot of the incoming dust after my exchange.
I'm having some other problems as well, preferably with 3D youtube videos not playing in 3D. :/
I was thinking about getting the Otterbox Defender but I decided not to because of the size of it, But now I think I'm gonna get it because it will totally keep dust from getting under the screen.
I havent had this issue myself since the Hero, but it was most definitely annoying. It got so bad that I was tempted to just spray the phone with aerosol lol
Every HTC phone I have had has screen lifting issues. When you get a new htc phone press around the screen. If you hear any popping sounds the screen is strarting to left and will get dust under it. I use a hair dryer and get the screen really hot. Then press the screen down for 3 to 5 mins. This will help seal the screen and will keep dust out of your new phone. There can be dust under the screen from poor manaurfatioring proccess so inspect your new phone then use the hair dryer trick before it gets dust under the screen.
Yeah I got a damn spec of dust stuck inside my camera lens too... good thing its off to the side edge but yeh that urrrks!
Jeremiah239 said:
I was thinking about getting the Otterbox Defender but I decided not to because of the size of it, But now I think I'm gonna get it because it will totally keep dust from getting under the screen.
Click to expand...
Click to collapse
I got the otterbox commuter case and it is wonderful. It is like silicone so it isn't slick and it doesn't add a lot of mass to the phone. It will still go in your pocket easily.
Mine had dust too. Exchanged it as soon as I noticed it.
Sent from my PG86100 using XDA Premium App
I literally just watched a piece of dust get stuck under the screen when I was wiping it off. It wasn't there, then a moment later it was. This is in addition to 3-4 other specs I just noticed today. I think I may go into the Sprint store this weekend and exchange it. Has anyone had any trouble exchanging it for dust issues?
I just noticed 2 specs of dust near the charging port, very annoying. I had this issue with the Hero as well...got about 3 replacements, and they all eventually got dust under them.
Anyone have an issue exchanging their phone with this issue? I got mine at Best Buy, so they better take it back.
I got mine at Best Buy as well. Just make some stuff up like the buttons feels loose and the battery will drain randomly at times.
Why, is dust under the screen not a valid reason to return it? It shouldn't happen.
You guys should put a piece of tape over the headset jack when not in use. Most dust comes in through that jack.
ronnienyc said:
You guys should put a piece of tape over the headset jack when not in use. Most dust comes in through that jack.
Click to expand...
Click to collapse
I think the dust is coming in from the sides of the screen because its not sealed good
For those of you that have dust, did you exchange it for a new phone?
ronnienyc said:
You guys should put a piece of tape over the headset jack when not in use. Most dust comes in through that jack.
Click to expand...
Click to collapse
Why the eff should somebody have to do this to any phone let alone a brand new phone? If you have to do that then its not built right.
True, but it works.
Lol, I am not putting tape on my headset jack.
It looks like mine came in through the charger port
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Movisman said:
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Click to expand...
Click to collapse
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
0semaj0 said:
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
Click to expand...
Click to collapse
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Movisman said:
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Click to expand...
Click to collapse
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
0semaj0 said:
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
Click to expand...
Click to collapse
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Movisman said:
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Click to expand...
Click to collapse
Hey Movis,
What did you end up doing for your dropped phone?
I too have dropped my phone on its corner and the chrome along with the plastic is now dented.
Another one with the same problem here. I managed to create a bump on the chrome bezel.
Can I bump this post as I've also just noticed a ding in the corner of the chrome bezel was wondering if anyone had found a solution to this yet.? short of replacing the LCD/digitiser which like OPs phone are working fine. It's just cosmetic damage.
I once was in a bad mood and snapped a screen and backing/housing in half.I can't remember exactly,but I'm thinking the chrome bit may be part of the thin metal casing/housing that is glue taped onto the screen.
You separate the screen from the housing by using a hot air gun sparingly.
If you look back at a motherboard thread I was involved in,a person on here called Roger put up a great video tutorial link that may answer all your questions...
Sent from my GT-I9100
Ah cheers for the reply. Had a look at the mobo post you were involved in followed it to the link and coincidentally that's the exact video I watched last night. Very good video good detail and instructions. But its the black one he is stripping down so he makes no reference to the bezel which afaik is only used on the white ones.
Sent from my GT-I9100 using xda premium
I've not seen the chrome bit listed separately,so I guess its part of the metal top housing that the LCD is glued to.I've got a white one and its got a ding on it too.
You could email Samsung to see if you can get the part,but I think its not worth risking cracking the screen and you probably couldn't resuse / would get that stupid gluey tape stuff.
Sent from my GT-I9100
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
vyks10 said:
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
Click to expand...
Click to collapse
Hi, will the heat actually damage the screen? I saw some posts mentioning about putting it into the oven and such. It sounded very intense but if it works without damaging the screen, i might give it a try. Facing the same situation as yours. Scratches and dents all over my front chrome bezel.
Not sure who has this problem, but my phone tended to "creak" when pressed at certain points. I decided to figure out why this was happening. Turns out the battery itself has a little more motion than ideal and the phone was making the creak noise with the back cover off when i pushed on the battery.
My simple fix was to cut out a few pieces of paper the size of the battery and put them between the back cover and the battery.
This makes the phone feel much more solid. I'm sure tape would do the same thing. The trick is to find the right thickness between stopping the noise and still allowing the cover to fit on tightly.
mark9876 said:
Not sure who has this problem, but my phone tended to "creak" when pressed at certain points. I decided to figure out why this was happening. Turns out the battery itself has a little more motion than ideal and the phone was making the creak noise with the back cover off when i pushed on the battery.
My simple fix was to cut out a few pieces of paper the size of the battery and put them between the back cover and the battery.
This makes the phone feel much more solid. I'm sure tape would do the same thing. The trick is to find the right thickness between stopping the noise and still allowing the cover to fit on tightly.
Click to expand...
Click to collapse
I haven't had the same issue, but on my first Dinc 4G, the back case immediately next to the volume rocker was slightly loose, and I could press on it and feel a similar creak to what you're talking about. I traded it in after a week because of a few other issues, and this new one doesn't have that same problem. I didn't do anything to try to remedy it, so I don't know the best solution.
theres now 4 inc4g ltes within my family lol.
the creek is only noticeable on two of them.
My solution to the creaky problem was to take the cover off and cover the little dimple thingies with electrical tape.
Works like a champ.
Sent from my ADR6410LVW using Tapatalk 2
I take a more simplistic approach for all the phones i purchase and issue here at work. Peel off 3 of the small postit notes, stick it on the battery, no creaks, groans or otherwise irritating sounds.