Related
May have found a fix for the random WiFi drops that some or more most people are having with the touchpad
1: Install Preware (search is your friend to install on how to )
2: Open Preware and in the search look for Govnah and install that
3: Open Govnah and go into Profile - Advance Settings - TCP Congestion
4: After going into all them tabs change the value from “Westwood” to “Reno”
Well from what I see I haven't had a drop in about 3 hours from jumping back and forth from one website to video sites and streaming movies and facebook. Well from what I have seen no drops hope this works for people and fix this problem that I also have been looking for
I sometimes suffer from the occasional WiFi drop too. It doesn't always happen so its hard to pinpoint the cause but it does occur. I went into the settings as you mentioned but my choices are "cubic" and "reno". I switched it to "reno" to see if what you suggested works..
Will update soon, testing....
thanks,
rlee
i think its your wifi router maybe you need a better antenna
Soul Train said:
i think its your wifi router maybe you need a better antenna
Click to expand...
Click to collapse
I have seen bad router placement and inadequate antenna coverage cause it too.
There are beaucoup free plans for home-built boosted antennas if you search it, but my old trusty D-link 624 still gives me a usable connection all around the house and Motorhome.
well this is day 2 of playing my my touchpad and my have seen one drop but that could of been because I was spittle out of range.... Well I don't think its my router because I go into setting of the router off my touch pad to see my signal I'm getting and the lowest I have seen is 90%..... Well one thing is that I have seen before changing the setting is that I did get the drops now I don't know if I'm getting them at all but maybe one time but I could of been out of range with that
rlee008 said:
I sometimes suffer from the occasional WiFi drop too. It doesn't always happen so its hard to pinpoint the cause but it does occur. I went into the settings as you mentioned but my choices are "cubic" and "reno". I switched it to "reno" to see if what you suggested works..
Will update soon, testing....
thanks,
rlee
Click to expand...
Click to collapse
Well it may also be what I'm running why I have those come up but I'm using F15C Eagle so they may have something different with that
soulre2 said:
Well it may also be what I'm running why I have those come up but I'm using F15C Eagle so they may have something different with that
Click to expand...
Click to collapse
I just did the change to Reno yesterday, also having random no internet connection problem as well on F15C Eagle. So far on overnight charge and first use this morning, I did not have to do a device reset to connect to the net like every morning.
Will see how it goes during the day out from sleep mode and into heavy browsing for a few hours.
the truth of my thoughts is that I don't think it has nothing to do with the WiFi router at all things are not adding up to it but I really thing the software end on because I was going to look up the different of the why so many types but as I think I see it the Westwood setting is to heavy of a data transfer that the touchpad can handle so that's why I set it to a different one maybe I'm right maybe I'm wrong but I don't see any problems as of yet on my touchpad when it comes to getting online or doing anything with it yet because of changing it to “reno”
pback said:
I just did the change to Reno yesterday, also having random no internet connection problem as well on F15C Eagle. So far on overnight charge and first use this morning, I did not have to do a device reset to connect to the net like every morning.
Will see how it goes during the day out from sleep mode and into heavy browsing for a few hours.
Click to expand...
Click to collapse
another way is to put it into airplane mode and back off so you don't have to restart it all the time
No this is a problem with the TP. I did a few different test with different devices using different routers at different location's. The TP is the only one that would loose connection. Even with manually setting it up it can go in and out... I am using warthog. Mine does it about 3 times a day...
So you tried what I stated up top???? If so it was still dropping WiFi 3 times a day
Sent from my HTC Sensation 4G using XDA App
My TP has the same problem. I know it is not my router placement, as all my other wifi devices work everywhere in my home with 75% or higher signal strength. Only the TP stops working.
What is annoying is that it shows it is still connected to the wireless, but nothing works at all.
I'll give the Govnah setting change a try...
No i have not tried what you said above. I will and report back.
well from what I see I still haven't gotten a drop yet and that's all around my house but I really don't think its the router because yea as everyone has said it says that it is still connected but no internet connection but go into your settings of your router from your touchpad and log into it and look at connected devices and see the signal that it is getting and you will see it is getting good signal but it well maybe.... Everybody house is different from another person you know but as before I don't think it is the router at all it is far to wide that everyone is thinking the same thing with different routers and all but also everyone is also saying that everything else is working also so that is why I'm come to believe it is the touchpad
Last night I tried to watch some xfactor videos in youtube and I got frustrated. I only managed to watch 1 or 1.5 videos before I loose the connection. The wifi indicator is still saying connected but the video just stop with small circular cursor running.
Today I tried to remove Muffle-System-Logging (it was on .23 version) and now I've been watching about 5 videos without any interruption.
BTW I'm using Warthog kernel, OC to 1.7Ghz.
heru said:
Last night I tried to watch some xfactor videos in youtube and I got frustrated. I only managed to watch 1 or 1.5 videos before I loose the connection. The wifi indicator is still saying connected but the video just stop with small circular cursor running.
Today I tried to remove Muffle-System-Logging (it was on .23 version) and now I've been watching about 5 videos without any interruption.
BTW I'm using Warthog kernel, OC to 1.7Ghz.
Click to expand...
Click to collapse
may have to look into that one also..... I have that intalled..... So did you do what I have posted or did you just removed the muffle-system-logging??
soulre2 said:
may have to look into that one also..... I have that intalled..... So did you do what I have posted or did you just removed the muffle-system-logging??
Click to expand...
Click to collapse
Oh yes, last night when I got that problem I tried to change the TCP Congestion option to reno but the problem was still there.
Another item of note.
On my router it shows all connected wireless clients. There are currently 2 phones, a laptop, and the touchpad connected.
The phones and laptop show mode 11g rate 54
The touchpad shows mode 11ng rate 19
well it looks like you maybe a little bit out of range from your router because of the connection speed but really still don't see that its the router you know well I don't know if I have been dropping or not at this point really haven't been on it all that much because of work and having kids but we all need to get together and try and fix this problem that most people are having with this but where to start is my question on it??? But one thing I know for sure it has to be the touchpad because everything else in everyone's house is working fine
Looks like the change helped a little, worked nearly all day without drop outs until late last night just browsing xda. I am not experiencing wake from sleep problem yet with Reno.
Has anyone experienced a continuous connect, get IP, disconect, connect, get ip disconnect...
It's impossible to download anything if the Nook is disconnecting and connecting once every 3 secs....
Anyone had this problem as well?
Thanks,
Giz
Authentication failure?
That usually is the symptom of authentication failure:
Password or passprhase.
MAC lockout on the router (does your router block non-listed MAC addresses?).
Sadly, useful messages on authentication failures are not specific (for security reasons).
DeanGibson said:
That usually is the symptom of authentication failure:
Password or passprhase.
MAC lockout on the router (does your router block non-listed MAC addresses?).
Sadly, useful messages on authentication failures are not specific (for security reasons).
Click to expand...
Click to collapse
Hi,
Unfortunately, I do get an IP...and am able to start browsing, downloading stuff....etc...but after a couple of secs...the NT just goes crazy and enters this connect/disconnect loop....
I have even changed the WiFi protection from WPA2 into WEP,, changed router channel....changed from N into G....
Same problem always....get no problems with my laptops...
I have the router configured with DHCP enabled, so no static IP addresses defined...
Hi there,
I had some issue like that a year ago. All i had to do was to remove/forget all my favorite wifi networks and then add the one which caused my issue again.
Hi..
Don't know if this might help you...seems quite a problem on:
bookclubs.barnesandnoble.com/t5/NOOK-Tablet-Support
Look for the Thread...won-t-stay-connected-to-my-wi-fi/m-
You already tried different channels, etc, so sounds like a router/client compatibility problem. Just because your laptop connects doesn't mean everything will connect.
Bring Nook to a few places with wifi access and attempt connection. If it can't connect with any, it's a Nook problem, if it connects with some or all, it's your router problem.
If the latter, Google on your router's make & model and apply any firmware update found. Also search on "[router_make] disconnects" to see if there is a reported problem with the router.
As mentioned elsewhere, try setting router to G if currently using N. Some old router still use funky Draft 1.0 N standard. This goes in hand with firmware update suggestion above.
If that doesn't work, try a different router. [To minimize setup work, leave old router in place, and connect new router downlink from old. Disable routing on new to use it as AP only (old one does the routing). Set different channel for the AP, and point your Nook to it.]
If that doesn't work, give up. Return/exchange the Nook, and buy something else.
e.mote said:
You already tried different channels, etc, so sounds like a router/client compatibility problem. Just because your laptop connects doesn't mean everything will connect.
Bring Nook to a few places with wifi access and attempt connection. If it can't connect with any, it's a Nook problem, if it connects with some or all, it's your router problem.
If the latter, Google on your router's make & model and apply any firmware update found. Also search on "[router_make] disconnects" to see if there is a reported problem with the router.
As mentioned elsewhere, try setting router to G if currently using N. Some old router still use funky Draft 1.0 N standard. This goes in hand with firmware update suggestion above.
If that doesn't work, try a different router. [To minimize setup work, leave old router in place, and connect new router downlink from old. Disable routing on new to use it as AP only (old one does the routing). Set different channel for the AP, and point your Nook to it.]
If that doesn't work, give up. Return/exchange the Nook, and buy something else.
Click to expand...
Click to collapse
It's problably a router/NT incompatiblity issue....I have just got a stable WiFi connection at my workplace...but it's an open network which works like a hotspot where you have to use a login/password....
Hum, I have just now realised that I happen to own a NETGEAR DGN1000b router....having just gone to the NetGear's website, it looks like there is a known issue with Blackberry phones as well (I do have a blackberry Storm and get the same connect/disconnect behaviour as I am getting on the NT)...
Here's the link for everyone's reference: http://support.netgear.com/app/products/model/a_id/12208
Cheap f***ing DSL/WiFi router.....I shouldn't expect much more from a router which costs 50EUR, but since the Router provided by TCom got toasted...
I'll try to update the firmware to the latest version (from Sep 2011)...Let's see how it goes...
Thanks again to everyone for having the patience to help me out setting up my NT
This is an awesome forum packed with awesome people!
Cheers,
Gizmo
Hey, I have just updated the router firmware and that fixed the problem!!!
Both my blackberry and my Nook Tablet are now able to connect and stay connected to the WiFi network!
Thanks for the tup guys!
have a question
I have a WNR2000v1 running 1.2.3.7 and the damn thing does not work with the NT, should I bite the bullet and get a new router? and if so I'd like to stick with NetGear and what would be a good model?
Garrett07 said:
I have a WNR2000v1 running 1.2.3.7 and the damn thing does not work with the NT, should I bite the bullet and get a new router? and if so I'd like to stick with NetGear and what would be a good model?
Click to expand...
Click to collapse
Hi!
As you might have read in on omy previous thread posts, I was only able to solve my problem (and ended up solving my blacberry connections issues as well) with a firmware upgrade on my netgear router..did you look for you model on Netgear's website? Did you check the known issues list? My problem had to do with the fact that the router could not handle properly authentication methods used by blabkberry models...
That was what they claimed to have fixed....so I gave it a shot just to make sure that I would't have to buy a new router...
ThyGizmo said:
Hi!
As you might have read in on omy previous thread posts, I was only able to solve my problem (and ended up solving my blacberry connections issues as well) with a firmware upgrade on my netgear router..did you look for you model on Netgear's website? Did you check the known issues list? My problem had to do with the fact that the router could not handle properly authentication methods used by blabkberry models...
That was what they claimed to have fixed....so I gave it a shot just to make sure that I would't have to buy a new router...
Click to expand...
Click to collapse
Like I said, I have the WNR2000v1 which is like a 2009 model, I have the latest update available (as of September of 2010) and i have tried everything like setting it to 54mbs maximum and it has yet to work.
Edit-So I went to Best Buy and bought the WNDR3400 and it works flawlessly out of box, guess the new N protocol (which was my sneaking suspicion) is what the NT runs on, good thing too because my mom would have freaked if she couldn't have downloaded her new books on her christmas present. Thanks for all the help man.
Garrett07 said:
Like I said, I have the WNR2000v1 which is like a 2009 model, I have the latest update available (as of September of 2010) and i have tried everything like setting it to 54mbs maximum and it has yet to work.
Edit-So I went to Best Buy and bought the WNDR3400 and it works flawlessly out of box, guess the new N protocol (which was my sneaking suspicion) is what the NT runs on, good thing too because my mom would have freaked if she couldn't have downloaded her new books on her christmas present. Thanks for all the help man.
Click to expand...
Click to collapse
Well problem solved with buying a new router then.
So you did have the latest firmware on the router as listed in here:
http://support.netgear.com/app/answers/detail/a_id/11895
The KB on the Netgear's website (http://support.netgear.com/app/products/model/a_id/2614) also mentioned some sort of incompatibility with BB which could be extended also to Nooks, I guess...
Well, you can always get some money back by selling your old router on eBay...
Cheers,
Giz
Hi all, long time browser first time poster!
I have come across an issue with my TFP that every now and then, even when in the exact same spot where the wifi has worked before, it stops working.
My issue isn't range or anything like that.
When I go to my wifi settings, my Prime can see my network and many others around me, shows my signal strength as 'good' but when I tap my network and hit connect, it does nothing! The dialog box disappears and I am still not connected to my network, but it is still there in the list and still shows signal strength as good!
Has anyone come across this before/know a possible reason?!?
No idea. Try forgetting and re-connecting?
Sent from my HTC Vision using xda premium
I am experiencing the same thing. Seems to be happening on both AP's and tethering from my phone.
Experienced as well
I also have this problem occasionally. I have always been able to solve it by either: forgetting wifi source and rescanning; or 2) rebooting.
I agree that it is irritating.
This happens to me nearly every time I try to make a new connection.
The one place that it happens less frequently is at work, which is strange, because the wifi here is very spotty. Maybe because the signal comes/goes so often the software notices it more? *shrug*
I as well do have this issue. To resolve my issue, I have been turning the wifi on and then off again. Sucks to waste 30 seconds waiting for it reconnect but it works. Seems to happen after the tablet has been sitting awhile
+1 on that issue, seen it many times on several primes.
How does it feel to beta test a product that was not ready for release?
What update are you on? I haven't had this happen since the initial upgrade to ICS.
Sent from my Transformer Prime TF201 using XDA Premium HD via my tethered HTC Vision
buxtahuda said:
What update are you on? I haven't had this happen since the initial upgrade to ICS.
Sent from my Transformer Prime TF201 using XDA Premium HD via my tethered HTC Vision
Click to expand...
Click to collapse
Hey, I always try to keep up to date, i am on ics and on .21
Wifi version is 6.1.1.22, dunno if that makes a differences to anything!
buxtahuda said:
No idea. Try forgetting and re-connecting?
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Tried his, seems to work sometimes but more often doesn't!
Same version here. I have seen the forget/reconnect method fail also.
I had this problem when I had it set to turn off the wifi when it was sleeping. Once I unchecked that option, it never appeared again. Always had to reboot to get it on wifi when it happened.
Crazy. Obviously I could go into detail on some configuration changes for your routers or whatever, but I'm sure you've browsed the forum enough to see them all. And if not, even if you can change your own router settings it does no good abroad.
Tried several different networks with the problem occurring across the board?
Yesterday evening the problem attacked with a vengence, Could not connect to my network, tried several times turning wifi off and on, forgetting and reconnecting to network and several reboots, nothing would let me connect to my network, gave up and went to sleep!
ASPrime said:
I had this problem when I had it set to turn off the wifi when it was sleeping. Once I unchecked that option, it never appeared again. Always had to reboot to get it on wifi when it happened.
Click to expand...
Click to collapse
I only found that option last night! My wifi has always been set to always on, but just before going to bed i changed this option to off when asleep, haven't been back to my prime to check it out yet.
buxtahuda said:
Crazy. Obviously I could go into detail on some configuration changes for your routers or whatever, but I'm sure you've browsed the forum enough to see them all. And if not, even if you can change your own router settings it does no good abroad.
Tried several different networks with the problem occurring across the board?
Click to expand...
Click to collapse
Unfortunately I don't really have the opportunity to try different networks for long enough to see if this is a problem!
I have tried a few settings changes on my router, last thing left to try is static IP{ address, that is this evenings job when I can round up all my devices and grab their mac addresses!
I recently purchased the 16gb Sony Tablet S and am contemplating on whether or not to return it by the 30 day window due to sporadic wifi connection at my apartment. The issue is not as much the reobtaining wifi after the screen unlocks, as it is the general holding of the wifi connection when the screen is on.
I've isolated the problem to my specific router, as it works PERFECTLY at my GF's apt and my parent's house. Always connects right away and stays connected. However at my apt it doesn't always connect right way and have to manually turn the wifi off and on again, and sometimes have to manually hit connect from the wifi screen. When it finally obtains IP address it will connect, but most of the time for only a short period (like 20-30 seconds) before the wifi signal on bottom right just disappears. Then I have to toggle the wifi on and off again and try again. Very annoying. Sometimes it will connect though, and the wifi holds up like it should.
Here are the fixes I've tried so far:
* Reset and Factory Rest device
* Forget/Reconnect to network from device
* Update Router Firmware
* Configure Router - g/n mode and n mode from b/g/n
* Set Router Channel from auto to 1,6 and 11.
* Wifi Lock App (doesn't work and drains battery)
Personally, I feel like the tablet itself has an inferior wireless radio. Compared side by side to my other wifi devices, it has noticeably less signal at the router and diminishes quicker the farther away you go. Now, this doesn't really bother me as I'm usually always near my router. However, when I was scanning all the wifi networks around me (in cmd: netsh wlan show networks mode=bssid) I found over 30 networks around me all using the full channel spectrum. I've tried every channel on my router, but 11 seems the best.
Would a crowded wifi area affect the tablet? But again, my laptop, 2 phones, and PS3 connect at every channel with no problems at my apt. At my parent's house and GF's apt there are only 1 or 2 other available networks that could also be on my channel. That's the only thing I can think of.
I just don't understand why only the tablet is having wifi problems.
I have about a week left to return it, and would like to keep the tablet, but running out of patience. Next, I think I will try using MAC address and see if that works.
Any help would be appreciated!
Try this!
I had the same issue.
I solved the problem
1 - turn off wifi.
2- in accounts - turn off "auto connect"
3- turn on wifi ( test if work )
4- reconect the accounts
too simple .. but works , try it.
Would a crowded wifi area affect the tablet? But again, my laptop, 2 phones, and PS3 connect at every channel with no problems at my apt.
Click to expand...
Click to collapse
Thats certaintly not the problem since i have so many devices logged in on my network, and not having the same problems,
The Wi-Fi on Sony tablet has known issue's like loosing connection when screen goes standby, even if you checked this in settings never to shut down.
The steps in the post above can be the sollution, and if not, sony will make somehow a repair or a dev would fix this. goodluck.
setterose said:
I had the same issue.
I solved the problem
1 - turn off wifi.
2- in accounts - turn off "auto connect"
3- turn on wifi ( test if work )
4- reconect the accounts
too simple .. but works , try it.
Click to expand...
Click to collapse
Thanks. I tried that sequence and it seemed to work for a little bit, but then the problems reoccurred.
Again, the problem is not just that the wifi doesn't pick up right away after standby, but also, and more importantly, it looses wifi BEFORE the screen goes out while I'm using it, repeatedly.
Its very annoying and only happens at my apt and not at other networks. No other device on my network has this problem.
Nobody else has had this problem before?
I remember from older posts that tablet s has problem with certain brand routers. What routers are used in your places.
Kermit33 said:
I remember from older posts that tablet s has problem with certain brand routers. What routers are used in your places.
Click to expand...
Click to collapse
Its a ZyXel brand router that doesn't work. I'm pretty sure the one's that do work are both Linksys. The ZyXel router is probably a cheap one because it came bundled in a promotion from my ISP.
I guess I could try another n router, but still find it strange that all my other wifi devices are fine with the current router.
Wifi Signal
Sony is not as reliable as it used to be... My Tablet S keeps loosing WiFi signal, and the solution I found was to turn off and back on the WiFi. This fix the issue.
However another very annoying problem is that very often I need to hard reset the tablet as it locks the screen with no other way to recover it. Shame on Sony. An the annoying side flash light is ridiculous. I used to have an A100 that aside any design issues, worked perfectly never had any operational issue with it. Should have upgraded to a A500...
What worked for me.
I bought a Sony S as a birthday present for my wife. That was yesterday and today she went to work and left me to set it up for her.
I have a Cisco E3200 router. The tablet could see my router and connect to it but would drop the connection after 5 seconds.
Well, that was the first hour and a half of my day.
Finally, with nothing else to try, I set up a guest account on the router. The tablet found it and connected to it on the first attempt and has been connected now for over four hours including multiple restarts.
I have no idea why this worked. I just know that it did.
Clive.
Same issues here when docking tablet sometimes, but my work around is to turn WiFi off, and hit Fast Reboot ( app by Great Bytes Software) then turn WiFi back on. Fast Reboot seems to do a soft reboot on apps and system and it only takes a few seconds.
Hope this helps!
Maui
Sent from my Sony Tablet S using xda app-developers app
Wifi Issues
I bought the 32G version from Woot recently. The WiFi reception is awful. I am on my second unit same thing.
4 feet from Router (on 2nd floor), 3 bars out of 4. 15 feet goes to 2. Downstairs goes to 1 bar 1MBS. And drops like a hot potato. Sony has sent a RMA for repair. Being this is my second unit with same issue, I doubt there is a fix.
I use a LAptop, netbook, android phone on the same router. No issues. They all work well, even in the basement!
Updated to 4.0 on my original unit, no change.
Just ranting here, hoping for a surprise fix. Other than that Mrs Lincoln how was the play? I love the tablet otherwise. Will probably throw and a spare router downstairs or feed it off my 4G phone. Now that really sucks..LOL
Anyone else
4.03 can solve this problem?
[email protected] said:
4.03 can solve this problem?
Click to expand...
Click to collapse
4.03 did not make a difference.
**EDITED: pls ignore this post. irrelevant.
Sent from my Sony Tablet S using xda app-developers app
sony tablet s wifi issue
Hi all,
after weeks of study here is what i found out:
- wifi issue is not a hard ware issue, it is simply the software.
- wifi issue occurs only with certain routers with both N & G channels , Especially Netgear and BT.
- Wifi manger app makes it better and less annoying, issue still there but less occurring. try different channels.
- Tablet S for some reason does not like the channels used by certain Routers.
- do not bother with wifi lock app, does not do the job and steals ur battery.
- after weeks of trial, tablet is just great, but needs attention from Google.
SO
My friend's wife works for Google, when asked for the favor of the insider , engineers in Google said, first stage is to roll out Xperia release 5 to try and fix problem, then both S and Xperia will get Jelly bean with a definite fix. Testing as we speak.
all I can do now is get a good router and hope for the best.
Fatthyrahim said:
Hi all,
SO
My friend's wife works for Google, when asked for the favor of the insider , engineers in Google said, first stage is to roll out Xperia release 5 to try and fix problem, then both S and Xperia will get Jelly bean with a definite fix. Testing as we speak.
Click to expand...
Click to collapse
Straight from the horse's mouth??? Tablet S will infact be getting Jelly Bean???
Fatthyrahim said:
all I can do now is get a good router and hope for the best.
Click to expand...
Click to collapse
what do you think about sitecom routers?
WIFI More
Fatthyrahim said:
Hi all,
after weeks of study here is what i found out:
- wifi issue is not a hard ware issue, it is simply the software.
- wifi issue occurs only with certain routers with both N & G channels , Especially Netgear and BT.
- Wifi manger app makes it better and less annoying, issue still there but less occurring. try different channels.
- Tablet S for some reason does not like the channels used by certain Routers.
- do not bother with wifi lock app, does not do the job and steals ur battery.
- after weeks of trial, tablet is just great, but needs attention from Google.
SO
My friend's wife works for Google, when asked for the favor of the insider , engineers in Google said, first stage is to roll out Xperia release 5 to try and fix problem, then both S and Xperia will get Jelly bean with a definite fix. Testing as we speak.
all I can do now is get a good router and hope for the best.
Click to expand...
Click to collapse
I have tried 3 different Routers.
Verizon/ActionTecMi424
CheckPoint Z-100G
Linksys WRT54GL
No change no difference.
I finally installed another router on the other floor. Now it works in entire house, but have to change router connections if I move to a different floor.
The big question here I think is:
Is every Tablet S this way or do we have some bad samples? Software or Hardware. Sony has given me and RMA # to return for repair. I am hesitant to do that. If there is no fix or all units are this way.
I am not 100% sure but from my own testing I found it working 90% of the time everywhere else, here is how I tested:
home netgear, does not hold wifi , have to refresh page all the time to browse internet.
Work ( different router not sure what type yet) works just like a dream, fast no wifi drops no refreshes needed.
took it to most free wifi spots, not a problem.
friends house BT, Same issue again.
Wifi manager made it a bit better yes ( have to test now on channels 12 , 13 or 15 , wifi lock app does not work.
I hate to get a different router to get same issue at the end. however different posts elsewhere suggested setting router to N on and G off channels testing each time you make a change, on tablet set to manual ( have not done this bit yet).
It's not like we are all being picky here with Sony, we like the tablet itself and we bought it with a lot of money, we want to be able to browse the internet download things without getting our livers and kidneys enlarged.
more to follow , I am really hoping to be able to get my friend's wife update as she told us GOOGLE IS VERY AWARE OF THE ISSUE.
air16 said:
what do you think about sitecom routers?
Click to expand...
Click to collapse
Bought Sitecom Router last friday, I can say that now my tablet holds wifi signal very well... :good:
WIFI Issue fixed
All,
there was an update last Thursday that fixed the wifi issue, I am not really sure what but my tablet s now holds and keeps wifi everywhere.
I had issued before with netgear and bt routers and after last Thursday it was just fine, i need to review the recent updates done and Let you all know.
I tried it everywhere and works perfect, download speed is perfect , not one drop of wifi so far.
I assume either Sony or Google did something here as it was getting an update last Thursday that lasted about 10 minutes, could not figure out what was that update yet.
I was using my prime with the keyboard attached yesterday morning while running CM10_9/2 version nightly. Now I know WiFi signal strength has never been real strong for the prime in general, in fact it sucks, but I was happy that I could use it all over my home. That all changed yesterday morning when the signal dropped completely. I thought it was just my router so I reset it and checked my phone and PS3 to see how there signal was. Both seemed fine and normal, but not so on the Tablet. I could not get WiFi to reconnect. I was so confused so I restored a couple older ROMs and even flashed brand new ones to see if it was somehow a kernel issue, not so much. Dumbfounded I went in the room that has the router in it with the tablet, not sure why, but I did. Low and behold I had a signal while standing right next to the router. Once I leave that room I cannot get a signal. So I thought I would bring it to my work today to test signal strength with a router a few cubes down to make sure it wasn't my home network. Well the results were the same thing. I can connect to it, but the signal is horrible! Is there anything else I should try? Is there any way to get this fixed under warranty with an unlocked bootloader as all I was doing was reading something online? Any other suggestions you guys might haver? I truly appreciate the forums for times like these. Thanks in advance!
gti3358 said:
I was using my prime with the keyboard attached yesterday morning while running CM10_9/2 version nightly. Now I know WiFi signal strength has never been real strong for the prime in general, in fact it sucks, but I was happy that I could use it all over my home. That all changed yesterday morning when the signal dropped completely. I thought it was just my router so I reset it and checked my phone and PS3 to see how there signal was. Both seemed fine and normal, but not so on the Tablet. I could not get WiFi to reconnect. I was so confused so I restored a couple older ROMs and even flashed brand new ones to see if it was somehow a kernel issue, not so much. Dumbfounded I went in the room that has the router in it with the tablet, not sure why, but I did. Low and behold I had a signal while standing right next to the router. Once I leave that room I cannot get a signal. So I thought I would bring it to my work today to test signal strength with a router a few cubes down to make sure it wasn't my home network. Well the results were the same thing. I can connect to it, but the signal is horrible! Is there anything else I should try? Is there any way to get this fixed under warranty with an unlocked bootloader as all I was doing was reading something online? Any other suggestions you guys might haver? I truly appreciate the forums for times like these. Thanks in advance!
Click to expand...
Click to collapse
Have you tried putting pressure on the wifi connectors to the right of the front camera? It seems that fixed some problems for some users.
pretty sure rma could fix it, not sure they would do it for free since you are unlocked. It is probably a physical problem more so than a software one.
Thanks for the responses, another kicker I forgot to mention and it's kind of a big one is this tablet is 8 months old. I bought it is January! Crazy how this just happened!
funfair said:
Have you tried putting pressure on the wifi connectors to the right of the front camera? It seems that fixed some problems for some users.
Click to expand...
Click to collapse
yes, and nothing happened signal wise.
gti3358 said:
Thanks for the responses, another kicker I forgot to mention and it's kind of a big one is this tablet is 8 months old. I bought it is January! Crazy how this just happened!
yes, and nothing happened signal wise.
Click to expand...
Click to collapse
I had a strange thing when I visited family recently. My tablet works all around my house no problem but in another house unless I was in the same room it didn't work.
I ran a wifi scanner and found that everyone around her was on sky and all using channel 1. I changed her router to use channel 11 and instantly had connection all around her house. All sky routers are set to auto yet use channel 1 as default.
Try using wifi analyzer https://play.google.com/store/apps/details?id=com.farproc.wifi.analyzer&feature=search_result#?t=W251bGwsMSwyLDEsImNvbS5mYXJwcm9jLndpZmkuYW5hbHl6ZXIiXQ.. to see what's being used around you and changing your router to get away from others.
It might not work but worth a go because I couldn't believe the difference when I switched channels.