HI Wizards
I must inform you for the following
I have installed the latest I9100G nightly - cm-9-20120730-NIGHTLY-i9100g.zip
2 problems are repeat themselves all releases
1. In PC - 'Device Manager' can't recognize device's Bluetooth properly - it says that drives cannot be found (a specific one)
2. In Car - I have a Bluetooth Speaker installed in my car. (Nokia CK-100, if required)
When I make an outgoing call everything works properly both sides are speaking and hearing each other
BUT
When I receive an incoming call device isn't recognize as BT connectivity and I can NOT hear or speak via car's microphone. I must use it as handset.
It is a known issue - I saw much of CM9 for I9100G users that complained this problems
Are there any suggestions to fix it??? Does someone know the source of this problems??????
Police might be caught me speaking without BT speaker and then I will get a report....
Trust'n you... tnx
When receive or dial out, my Nokia BH-102 mono bluetooth v2 works for CM9/CM10, but not Jabra Easycall v3 bluetooth. However music streaming works for Jabra mono headset.
Related
Hi folks,
Greetings from Italy.
First of all congratulations for this web site and thanks to all people who share their info's with others.
Problem: I use a Qtek 2020 with his original latest ROM 1.75.04ITA, radio 1.14.00, with a Logitech BT headset . This configuration works fine, and I can make/receive phone calls without any problem. I also have installed TT5 with a BT GPS Leadtek device and it works fine, BUT I can't hear TT5 vocal instructions in my BT headset! The voice from TT5 is only available on Qtek speaker.
If I receive a phone call during TT5 usage, the phone call is correctly diversed on my BT headset, on TT5 screen appears an icon showing 'Vocal instructions suspended' (but the graphic instructions are ok) and at the end of phone call the vocal instructions start again.
Note that using wired headset all works perfectly.
How can I hear these vocal instructions into my BT headset?
I know using Nokia 7710 with identical configuration it works fine, why using Qtek isn't?
Pls help me! It's is very important, because I'm an ambluance driver, and this function should be VERY useful for us in our job.
I'm availabe to all modifications: i.e. change ROM, change BT stack (but I'm not able..need instructions..), change WinMobile version... whatever you want if it can be the solution!
The only thing I don't want is to buy another device or a BT adapter.
Thanks,
Valerio
Hello all,
I have been using android on my hd2 for some time. There is 1 thing that I am unable to do which is frustrating.
Under winmo, I could listen to audio books via the Bluetooth headset, is this not possible on android?
Any help gratefully received.
Sent from my HTC Desire using XDA App
It is quite difficult to do it in Android at the moment. There are a few builds where this is possible, like forum.xda-developers.com/showthread.php?t=740963 (shubcraft) and forum.xda-developers.com/showthread.php?t=736545. However, these builds are not 'perfect' IMHO.
There are builds where you can listen to audio via bluetooth but if you get a call, it may reboot, like forum.xda-developers.com/showthread.php?t=769026.
There is no build I have found yet, that has Hotmail ActiveSync support, complete Bluetooth audio (to sync with Ford a2dp), no SOD and good battery life!
I can listen thru my Sony Ericsson HBH-DS headset just fine on following builds and phone calls also :
HyperDroid
Bangster's
mdeejay
...rest I do not run regularly but I suspect will work fine
Is the media-routing Problem similar to my Problem ?
I dont know if this issue is known, so i post it here in hope, that it will be fixed =)
I have in all Android apps wich had something to do with the sound-input/output problems. I had no sound there.
I tested FritzApp! ( a App wich allows you to use your Androidphone as an normal DECT/IP Phone with the Fritzbox!)
Either my communicationpartner hears my voice nor I hear him. Dialing works perfectly just the sound doesnt
And with MicDroid ( Something like LaDiDa for Iphone). ( Records just "Rauschen")
Can you confirm this kind of issue or am I the only Person, plz post your problems.
Or is this problem known ?
kind regards
malla
Click to expand...
Click to collapse
I would say that it is similar because even my BT system (on some builds) recognizes the phone, connects, plays music, dials calls, but there is no audio (in/out) once the call is connected. This is confusing because there is no issue in connecting as an audio device, the problem is in the phone device.
ranaonline said:
It is quite difficult to do it in Android at the moment. There are a few builds where this is possible, like forum.xda-developers.com/showthread.php?t=740963 (shubcraft) and forum.xda-developers.com/showthread.php?t=736545. However, these builds are not 'perfect' IMHO.
There are builds where you can listen to audio via bluetooth but if you get a call, it may reboot, like forum.xda-developers.com/showthread.php?t=769026.
There is no build I have found yet, that has Hotmail ActiveSync support, complete Bluetooth audio (to sync with Ford a2dp), no SOD and good battery life!
Click to expand...
Click to collapse
Try the new beta from Darkstone desire hd,works for me!
Including calling with bluetooth,without any tricks or errors!
Hey all,
Need some help with this, getting quite frustrated:
I have an international S III (i9300) and whatever rom I use I have the exact same problem that seems to be related to bluetooth.
- First use it connects to my caraudio (pioneer deh-4400bt) and it works great, good sound etc.
- Than I start Sygic (navigation) on the Phone, which I set in the "Always use internal speaker mode", so it doesnt use BT
Now two things happen:
- In sygic the sound through the internal speaker is very soft
- When I try calling with the carkit it does connect and make the call, but I hear a terrible garbled sound and i don't hear the other side
When I turn off bluetooth and than start Sygic... sound is perfectly loud
I have tried several roms, lastly thinking the issue might be solved with 4.2.2 but still the same
Is bluetooth hardware or software, and, when software, is it kernel or modem related?
Anybody know what causes this problem and how to solve it?
Hi, noticed with ALL AOSP / AOKP ROM's 4.2 and above that Bluetooth has an issue, bothering everyday use and still not fixed. Once you use BT car hands free and you want to to take the call back on the handset (internal or external speaker does not make any difference) the sound never comes back to the phone. Tried at least 3 different CM10 and above based ROM's, all has this problem. Anyone can get it fixed? For everyday use this is a real issue, cannot be that you cannot leave your car until you finished the call /or need to close the call and call again with BT off. Not realistic during a daily use. Thanks for any comments
i am having the same problem.
also when calling can't turn off my car. then it quit my call
Verstuurd van mijn GT-I9300 met Tapatalk
My bluetooth also stopped working after upgrading to 4.2
schaduw1984 said:
i am having the same problem.
also when calling can't turn off my car. then it quit my call
Click to expand...
Click to collapse
I was very happy with LiquidSmooth 2.8, so I decided to upgrade to 2.9.
Everything works very well, except for bluetooth.
Symptoms:
- A2DP streaming to my car stereo (JVC x250BT) works
- Bluetooth calls with car stereo result in either no or horrible sound
- Bluetooth calls with my (Parrot ck3100) carkit work sometimes on the first call after a reboot (usually fails)
- Bluetooth calls with a JabraBT215 headset also fail
- All the above has been tested with the device being the only registered (and therefore connected) device.
-- sometimes, I can hear the sound rapidly switching between the handset and the bluetooth device.
Occasionally, I also got no incoming sound during calls with no Bluetooth device connected.
Sometimes, connecting a wired headset would help.
I tried to highlight the point few months ago already on a development forum but I am too junior to be listen to... Even i strongly believe this is a real bug gating real everyday usage if you sometime want to use your phone as a phone..
Sent from my GT-I9300 using Tapatalk 2
Hi to all,
I have a problem with my Samsung Galaxy S III, 16GB, Android 4.3, stock rom, and the integrated SIP voip system (Call Settings < Internet calls settings) with bluetooth headset: when I receive a SIP call the audio is not transferred to the bluetooth, I do not hear anything and the microphone does not transmit. Otherwise, when I make a sip call everything works perfectly. I have tried many SIP providers and many BT headset but this issue remain.
It 'possible that some of you do a test to see if the problem is only mine or if it is a S III bug?
Thank you!
Same problem here
axterx said:
Hi to all,
I have a problem with my Samsung Galaxy S III, 16GB, Android 4.3, stock rom, and the integrated SIP voip system (Call Settings < Internet calls settings) with bluetooth headset: when I receive a SIP call the audio is not transferred to the bluetooth, I do not hear anything and the microphone does not transmit. Otherwise, when I make a sip call everything works perfectly. I have tried many SIP providers and many BT headset but this issue remain.
It 'possible that some of you do a test to see if the problem is only mine or if it is a S III bug?
Thank you!
Click to expand...
Click to collapse
I tried to make a skype call through my bt headset (NEXUS10) It works just fine, but when I try to make it with my S3 I have the same issue I dont hear the voice and the microphone was not working, I tried to make modifications to the sound files (root) but I didn't find what the problem was.. I'm using slimkat7 and former user of CM10.2 (
I tried also to make a call but instead of using the BT headset I used the little waterproof speakers (built in mic) and I could make it!! So I have three conclusions (actually they are questions if someone could help me too, I'm:
-You need an a2dp earpiece in order to make VoIP calls (as my speaker that worked)
-It can be the ROM or kernel (I've heard that)
-You need to modify de sound files (root) in order to "unlock" the feauture with the Samsung Galaxy s3.
None of above are actual solutions, I think they could be solutions so if someone could help to make it happen I would be very greatful!
thanks again