Hello guys i have managed to get iGO primo 2.0 or v9.6.7.2(something like that) on P500. I have installed it and it works superb, the only problem is that the resolution file which is a sys.txt is not properly optimised for our phone it is just a millimeter off it is 455X320 instead of 480x320.
Can someone help me optimize it and share it with you guys? I guess everyone is interested in upgrading to iGO primo 2.0 which i can tell you from 5 min of play with it that is way way better and more fun HA.
can you pm me, where did you get that? i've found a version, which starts to load, but after it displays basemap, and closes, like an fc, without warning.
ok so i got it working, i found a sys.txt for 320x480 and it works great the only problem is that i can't post here any file cause i gusess that is against forum rules and illegal... any suggestions ?
gafaysto said:
ok so i got it working, i found a sys.txt for 320x480 and it works great the only problem is that i can't post here any file cause i gusess that is against forum rules and illegal... any suggestions ?
Click to expand...
Click to collapse
I sent you pm
pm from me also
gafaysto said:
ok so i got it working, i found a sys.txt for 320x480 and it works great the only problem is that i can't post here any file cause i gusess that is against forum rules and illegal... any suggestions ?
Click to expand...
Click to collapse
I think it's not illegal as it is modified by u to work on p500.
Upload it to a sharing site and post the link.Give full credit to original owners and those who deserve it.
Post it in Apps and themes section :good:
Sent from my LG-P500 running Ginger Snap
plz upload the sys.txt here, i foud something and i will test it in a few seconds..
http://amtelefon.com/en/download-ig...hd-mini-windows-mobile/mobile-apps/#more-3353
the rezolution is the same..
Modding tools
Hello guys,
I've attached the tools necessary for modding iGO Amigo.
There are already working mods for HVGA resolution, but they aren't the best (e.g. text being displayed on top of each other, bad icon crop, etc). Otherwise these versions do work but they just aren't that good as the previous iGO 8 was for HVGA.
One thing is for sure: you have to get the iGOprimo_v9.6.7.235654_thin-v1.0.apk for our resolution (other version will hang with error message).
The files we can edit to make it smooth for our resolution are:
- sys.txt
- data.zip
-- uiandroid
--- multimode.ini
--- 800_480 --> contains encrypted bmp files which can be decrypted (and vice versa) with the enclosed tool.
Good luck!
iGO primo just from the phone
hello,
is there a way to make iGo primo to run ONLY from the phone?
to be precise. i need acces to my SD card in order to play music stored on the phones' SD card in my cars' stereo.
so i connect my phone to my stereo (phone is set as disk drive) so the SD card is unmounted from the android.
this means that iGo cannot access the maps and content from the SD card.
is there a way to move the content on my phone (i can create a sd-ext of 2 gb - enough for 3-4 maps i use)?
is there a way to alter sys.txt in order not to search for content on my SD card?
thanks.
D.
@gafaysto I sent you a PM.
thatnextdoorboy said:
pm from me also
Click to expand...
Click to collapse
Can you send me it, too?
I have the same problem as described in first page: iGO Primo closes after loading bar goes to 70%. I tried
iGOprimo_v9.6.7.235654_thin-v1.0.apk
iGO_Primo_thin-v11_custom-v10.apk
and
iGOprimo_v9.6.7.235654_thin-v1.2.apk
I have the same problem with all apk's
I have ROM cm-7-20121125-NIGHTLY-p500.zip which is working great.
How you solve that problem with iGO Primo.
Send me pls a PM with a working version if you have one.
Thanks
Later edit: - I managed to combine some files from different versions and now i have a working version for my optimus one. I uploaded the basic files and apk here if someone needs them. I think this link will expire after 30 days.
Related
I see WM2k5 1.60c at Buzzdev.net but I can't upgrade because I can't create ".nbf" file. Please help me
Hi, Can you post the link on buzznet as i can't find it??
cheers
Buzz removed the upload. He will post it later on :roll:
Victor
It see it is available on the site!
The dump of 1.60c on Buzz's site is only a dump of files from his device that were used for his testing...
The installer package will be released later on this week / early next week, please be patient...
it'll be worth the wait !
I confirmed it already reposted by buzz. You can download it now. I already upgrade it to 1.60cWWE, but I didn't see any different.
Quite a bit speedier, can't see much else different tho.
Thanks for your time and effort Buzz! We appreciate it.
Hi Buzz,
Thanks Wooooo Hooooo!!!
Everything works fine!!! The speed increase is wonderful!
I have no words to express my gratitude!! You are da man.
I think a lot of people have been spoilt and miss the big picture! Buzz you have done a great job. Just a small comparison to prove this:
Still Broken:
- The buttons (I would love for these to work, its no biggie)
- MMS (Which I have no need for realy)
Fixed huge problems by using WM2005 vs WM2003:
- Bluetooth works like a dream
- Headset reliably works
- Car kit reliably works
- BT GPS reliably works
- Persistant Memory!!!!
- No lockups
- Faster!!!!
- Battery lasts at least twice as long
- We now have WMP 10
- There are several other benefits that the os brings
Respect to the man with the plan.
Regards,
Duan
hi guys
i have dowloaded the update but how do u install it, and do rekkon it will fix the tomtom5 reseting problem
Cheers
Neel
HI all,
intalled 96c but now can't get the extra 32mb storage to appear, unhide then unlock then run Hima_DOC_Tool_1.0.exe, reboot when asked but this cause hard reset and i have no 32nb storage???
can't install voice command, says i have not go enough room?????
currently have
storage 30.53 and program 120.32
any ideas.???????
Also tomtom won't install. Installation just crashes right after agreeing to the licence AAAAHHH??????
I followed Buzz's instructions so can't see what i have done wrong???
Griffy wiffy- any chance you can tell me how u installed it as i dont understand the instructions that come with it
cheers
Neel
Hi Neel, not sure what you are asking. uninstalled what??
Hmmm... I can only see forum on Buzzdev. Where did main page go?
What about the STK (Sim Tool Kit)?
Is it working as well?
I've tried 1.60h.
I worked flawlessly.
However, I have to go back to WM2003SE coz I really need and use this STK feature everyday.
Can someone tell me where can I find the cure for STK to be used in WM5.0, please?
Thanks.
I have a problem downloading WM 5 v 1.60C. Can somebody upload the ROM please!!!! :roll:
tukmol said:
I have a problem downloading WM 5 v 1.60C. Can somebody upload the ROM please!!!! :roll:
Click to expand...
Click to collapse
try this :
http://twosx.net/ppc/WM2k5_1.60c.00WWE_XDA2_HIMALAYA.rar
:wink: :wink:
WM 2005 v1.60C !!
hi all,
after upgrade to wm 2k5 v. 1.60C
y i cant install program to 128mb storage ??
only can install to 31mb storage
thz for ur ansss
hi
after upgrading to 1.60c.00WWE, has anyone lost there Ram disk thing
im totally confused when it comes to Ramdisk, what on earth is it? does it make the memory available on WM5 more? more than the 60 mb we get for storage??
Sorry i know it's a stupid noob question but i really wanted to know
Cheers
Ash
Found here
http://forum.xda-developers.com/showthread.php?t=401679
anyone got this working on the touch dual? I've tried to install but get an error - NOT COMPATIBLE WITH YOUR PHONE. i'm running 6.1 on my dual!
Any help is much appriciated.
weird i get the same message
i have it working on my niki. there is a modified cab available which has been de-certified.
you must then patch the meta file for each map so the map is authorised for use on your handset! it only works with v7 maps!
its pretty quick, not much has changed. the type face is a little too big for qvga, but it works.
EDIT:
there is now a QVGA version, see link in post #7 in this thread.
Minty, can you link it, I can't see it in the other thread. Cheers.
Have a look HERE....
Maybe it could work.....
thanks flavio
im not sure if that is the modified one for QVGA screens, if not, try this one
http://www.megaupload.com/?d=MJRRV63O
(not my work, so dont credit me)
minty1978 said:
im not sure if that is the modified one for QVGA screens, if not, try this one
http://www.megaupload.com/?d=MJRRV63O
(not my work, so dont credit me)
Click to expand...
Click to collapse
This one works for me
ok guys i got tomtom working on my touch dual, however cant download any maps. I installed tomtom7 on my tytn ii and managed to download the free map - it is currently working ok on the tytn. when i port this map over to the touch dual, i get an error saying that the map is not compatible?
winwiz said:
ok guys i got tomtom working on my touch dual, however cant download any maps. I installed tomtom7 on my tytn ii and managed to download the free map - it is currently working ok on the tytn. when i port this map over to the touch dual, i get an error saying that the map is not compatible?
Click to expand...
Click to collapse
You need version 7 maps, available at all good online outlets ;-) and you need to run a keygen on them to make them work with your device. I have tomtom 7 working from a straight install cab on my Niki and my Artemis, and UK map 7.20 (latest one, google for it! Or PM me, I suppose) which then needs a different keygen running on it for each device you're going to install it on, ie the activation key for the map is tied to your device, which is why you can't copy the map over from one device to another.
official purchased maps do not require a 'keygen'.
i tried to install the TomTom_Navigator_7.450.9028_repack2.cab but the setup doesn't start... i come to the questio where i want to install it but then it stops without error
Hi guys, I installed the new tomtom 7 on my dual and when I try to start the APP appair a windows that say unable to start. not enough memory is avaiable. What's the problem? I think to have a good level of free memory.... sorry for my english and thanks
fyase said:
Hi guys, I installed the new tomtom 7 on my dual and when I try to start the APP appair a windows that say unable to start. not enough memory is avaiable. What's the problem? I think to have a good level of free memory.... sorry for my english and thanks
Click to expand...
Click to collapse
which version did you install?? this one TomTom_Navigator_7.450.9028_repack2.cab ??
gatto79 said:
which version did you install?? this one TomTom_Navigator_7.450.9028_repack2.cab ??
Click to expand...
Click to collapse
yes I installed this one
it worked fine on mine, try running it after a soft reset...or makesure all your programs are closed before running it.
what ROM are you running? mine is a HTC standard one from AUS.
as for not installing..not too sure, try the above also.
I also try to install and start the app after a Hard reset but nothing.... I have always the same error... my ROM is the original TIM italy
minty1978 said:
it worked fine on mine, try running it after a soft reset...or makesure all your programs are closed before running it.
what ROM are you running? mine is a HTC standard one from AUS.
as for not installing..not too sure, try the above also.
Click to expand...
Click to collapse
i have installed this RUU_Nike_HTC_DE_1.31.407.09_Ship
it does run no problem on my dual i have black repack3, v7 maps and it works great. you must have done something wrong some were. Try it again etc
.............
Hi all,
This is my first ROM it's the stock ROM for devices shipped in Egypt. I have followed the process as in the kitchen thread but I don't know how to make sure if this ROM is working properly or not. So hope one of you guys can test it and tell me.
By the way I don't encourage anyone to use this one except those looking for warranty as the GPS is disabled in this ROM.
http://rapidshare.com/files/185914134/WWE_ruu_signed_1_90_485_3.part1.rar
http://rapidshare.com/files/185885890/WWE_ruu_signed_1_90_485_3.part2.rar
Finally I would like to thank jcespi2005 and karimartine for their support. Wish you all good luck.
thanks
Thank you very much...i am downloading the ROM right now...i am very angry yet from HTC for doing such deceving for us in egypt...by the way what u did for the arabic support hadve u contact them or downloaded it from somewhere ?
Please our heros we need help to varify the ROM is Ok.
massoh said:
Thank you very much...i am downloading the ROM right now...i am very angry yet from HTC for doing such deceving for us in egypt...by the way what u did for the arabic support hadve u contact them or downloaded it from somewhere ?
Please our heros we need help to varify the ROM is Ok.
Click to expand...
Click to collapse
Yes, check this thread and my discussion with taiseer, he is really a nice guy and made a good job.
By the way if you are not intending to use arabic interface (i.e just reading and writing I encourage you just to use Mobidiv 416 and the keymapper to support the Hardware Keyboard.
http://forum.xda-developers.com/showpost.php?p=2752605&postcount=22
http://forum.xda-developers.com/showpost.php?p=2815285&postcount=33
Cheers,
thanks man...u r great...
microfox said:
Hi all,
This is my first ROM it's the stock ROM for devices shipped in Egypt. I have followed the process as in the kitchen thread but I don't know how to make sure if this ROM is working properly or not. So hope one of you guys can test it and tell me.
By the way I don't encourage anyone to use this one except those looking for warranty as the GPS is disabled in this ROM.
http://rapidshare.com/files/157208769/WWE_ruu_signed_1_90_485_3.part1.rar
http://rapidshare.com/files/157210046/WWE_ruu_signed_1_90_485_3.part2.rar
Finally I would like to thank jcespi2005 and karimartine for their support. Wish you all good luck.
Click to expand...
Click to collapse
Just a kind request to check out the links of the two parts as they are no longer working, and have this message "This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times." "This limit is reached" and I urgently need this ROM.
Hope to help me.
Thanks in advance
nqbu said:
Just a kind request to check out the links of the two parts as they are no longer working, and have this message "This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times." "This limit is reached" and I urgently need this ROM.
Hope to help me.
Thanks in advance
Click to expand...
Click to collapse
Links updated in the first post.
THANKS...
microfox said:
Links updated in the first post.
Click to expand...
Click to collapse
Many Thanks,
The connections through RapidShare is not allowed in my work. So, I'll dowload it once I get home then I'll let you know the result.
Thanks again
That's it
Works Great, Thanks a lot
Hi microfox,
Could you please provide us "What you did to enable the GPS"?
I get my Jade "Touch 3G" from Egypt and want to enable GPS.
Thanks a lot
I thought Jade had no GPS ship installed. Please correct me if I'm wrong. If it exists the only thing to do is to download the middle east rom from HTC site, it will be enabled by default 9again if GPS exists). Just go to support page, choose either the arabic or wwe rom, put your serial number and download. The rest is easy: connect to activesync, have more than half battery full, double click on the exe file you downloaded, follow the steps, and voila!!!
Can anyone help me with a link, I want to download TomTom 7, preferably the latest version. I need this apps for my HTC HD2 Dutch version.
I already did download one version in the past , but this version does use Bluetooth only. I need a version that allowes the Phone speaker to work
use this magical link :
magical link
Dear Corwin9,
Thank you for your reply.
I already could figure out that I could find this on the Google pages.
The point is that I can Not be sure that I have the correct program (.Cab), I already did destroy 1 HD2 installation of Windows Mobile 6.5.
Furthermore, I could Not find any download in which the specs are telling me if it is a Bleutooth version or Not.
I was hoping for a direct link which leads me to the correct program, this instead of taking any risks again.
Thanks again,
Regards
Eric
well...
I can't understand how you can brick a phone installing TomTom. As nothing is putted in registry or in windows folder...
This means that after each of my hardreset, I can launch tomtom without reinstalling it.
By the way, not all version of tomtom are supporting the bluetooth. As far as I know :
version 7.917.9186 has two choices, with or without bluetooth handling.
version 7.918.9193 supports bluetooth
so, try a search with those versions.
And sorry, I will not post direct links, because TomTom leads several checks on several forums to track down such links.
Hi Corwin,
Thanks a lot, Searching on the release number will help me to determine that I have the correct version.
The Version with Bleutooth did overwrite the "BTtrayCE" in the Windows directory, this did cause Bleutooth to stop working.
Thats why I do Not want to take the risks of getting any other surprises from Tom Tom
Wise precaution not to post direct links, I agree with you you.
Regards,
Eric
Hi Corwin,
I downloaded version 7.917.9186, but this does not seem to be a compatible program for my HTC HD2.
Do you have any suggestions ??
Thanks,
Eric
well... it depends on what message error you have !
pliz note that you will need maps to be able to use tt !
Hi Corwin
The HTC HD2 gives a reply "this program is Not compatible with your device" (in my case in Dutch). When replying with an "OK" than it stops installing
Regards,
Eric
so take a version for windows mobile... not for smartphone.
tested on winmo 6.1 and 6.5 and it's ok...
The 7.918.9193 vga black works very well with HD2
Hi Corwin,
Sorry for asking again your help !
I have now a working TT 7.9 installation, but installing the Maps is apparantly different than the older versions.
I do Not know which map is compatible with the ttn7.917.9186_qvga Version. (I could not find a WVGA version). At present TT replies at start up with the message that it can Not find the maps. As I did before, I did hack the "Meta" file, so I would expect it to work !
Regards,
Eric
Hi JSB,
I did install ttn7.917.9186_qvga_blue, it seems to work fine now on the HD2.
But the next step installing the Maps is an other story.
The problem starts with : which map is compatable ?? (Western and central Europe)
And How to activate the Maps ?
Do you have any usefull suggestions ??
Thanks,
Eric
I have version 7.918.9193 vga black with map western and central europe 2GB 860.3128 and it works just fine.
To activate the map it is another issue that I believe I cannot discuss here, if you know what I mean.
Hi JSB,
Thanks for your reply !!
I understand what you mean
Is activation the same story as "7.450 (9028)" with the maps "720.1803" ?
The Meta file story ??
I just hope I do Not ask to much Now !!
Regards,
Eric
Please check your PM
dankjewel hoor
Hi JSB,
May be call me stupid, but what do you mean by : "Please check your PM"
Regards,
Eric
look there, works flawlessly on my hd2
http://forum.xda-developers.com/showthread.php?t=647096&highlight=tomtom
Hello!
I have just make a simple Remote controll app for lg p500
This allow you to Remote controll your LG P500 from Windows over USB
so if someone want to try it or use it be my gest
Hope i can become usefull for someone
--------------------------------------------------------------------------------------------------
Verson 1.1
Manual installation
No shortcut
Have LG P500 usb driver
Verson 1.2
Automatic installation
Creates shortcut on dekstop
Uses driver from verson 1.1
Fixex "record future" Makes .mov file
Verson 1.3
Fixed smal installation thing
Fixed installation Directory
Removed .bat shortcut`s
i recomend to update to verson 1.3
---------------------------------------------------------------------------------------------------
Please give me feed about what you think about it : )
im also going to make a verson for mac os x if posibile and a verson that work With any andorid phone : )
Best Regards
OPJ
Smal fix
Putting up new download file v.1.1 for fix for smal problem. juse this new verson for getting it working.
Works very well (O1, Miks 6.5.7)
One thing I found: When clicking "Record" but then canceling the file selection window, the record button stays pressed. When clicking it again, you get a java.lang.NullPointerException
I can PM you the whole error, but I guess it's pretty easy to reproduce.
Wowwwww great program.Although lags and gives less fps,but a very good start.Am impressed.
seems to be an interesting 1
vansens: hmm, strange.. it is working fine on 5 computers for me.
What is Your java verson?
Are you running Windows xp/Windows 7?
To All :
Tanks for the feedback
---
OPJ
Update to 1.2
The program is now updated to verson 1.2
Read the first thread for info and download
---
OPJ
It's working great for me! Nice job!!
I'm wondering if u can add a function that will either turn the screen orientation based on the accelerometer or by adding a button that will change it?
spellspark said:
It's working great for me! Nice job!!
I'm wondering if u can add a function that will either turn the screen orientation based on the accelerometer or by adding a button that will change it?
Click to expand...
Click to collapse
hi,
dosent Your screen turn ? mine dos :S but if you right click in the Remote session the Picture shuld tur : )
it is verson 1.2 you have tried?
was the installation going well?
---
OPJ
olepj1992 said:
hi,
dosent Your screen turn ? mine dos :S but if you right click in the Remote session the Picture shuld tur : )
it is verson 1.2 you have tried?
was the installation going well?
---
OPJ
Click to expand...
Click to collapse
You didn't provide any readme/help file in the zip ( ), so I didn't know about right clicking... It works Video recording works
This could be very useful for someone who makes an app and wants to show it off on YT or some other video hosting provider... or make tutorials on how to use/flash sth
spellspark said:
You didn't provide any readme/help file in the zip ( ), so I didn't know about right clicking... It works Video recording works
This could be very useful for someone who makes an app and wants to show it off on YT or some other video hosting provider...
Click to expand...
Click to collapse
Good : ) sorry, im going to make a readmr/help file to Morrow : )
thanks gor trying it out : )
im happy for tips to get it smuuder : )
Found a bug?? Not sure... I get a popup with an "ArrayIndexOutOfBoundsException: Coordinate out of bounds!" error when I right click when in portrait/landscape position to change the orientation... What I mean is I get the error when I don't turn the phone to another position (I stay on the original one) and then right click... Also, the remote client freezes on the last frame before the error (it keeps displaying the last frame after closing the error window). The weird part is u can still control the phone by clicking inside the client...
Full string of the error:
java.lang.ArrayIndexOutOfBoundsException: Coordinate out of bounds!
at sun.awt.image.IntegerInterleavedRaster.setDataElements(Unknown Source)
at java.awt.image.BufferedImage.setRGB(Unknown Source)
at net.srcz.android.screencast.api.injector.ScreenCaptureThread.display(ScreenCaptureThread.java:145)
at net.srcz.android.screencast.api.injector.ScreenCaptureThread.fetchImage(ScreenCaptureThread.java:106)
at net.srcz.android.screencast.api.injector.ScreenCaptureThread.run(ScreenCaptureThread.java:51)
Click to expand...
Click to collapse
spellspark said:
You didn't provide any readme/help file in the zip ( ), so I didn't know about right clicking... It works Video recording works
This could be very useful for someone who makes an app and wants to show it off on YT or some other video hosting provider... or make tutorials on how to use/flash sth
Click to expand...
Click to collapse
Yepp good thinking : )
i did make it do use for making video torurials on our andorid Devices were i work, and i think many other users can use it too : )
i will try yo get rid of the lagg but i do think it laggs becouse the Communication is over usb
tnx for all good feedback, its make my day
spellspark said:
Found a bug?? Not sure... I get a popup with an "ArrayIndexOutOfBoundsException: Coordinate out of bounds!" error when I right click when in portrait/landscape position to change the orientation... What I mean is I get the error when I don't turn the phone to another position (I stay on the original one) and then right click... Also, the remote client freezes on the last frame before the error (it keeps displaying the last frame after closing the error window). The weird part is u can still control the phone by clicking inside the client...
Full string of the error:
Click to expand...
Click to collapse
hmm strange, im going to try to reproduce the error tomorrow and try to fix it
tnx for the report
Update v 1.3
Se the first post for info and download : )
Mac version is maybe ready to morrow .
What do you want?
Hi,
Do you want more out off this software?
or are the enything you want different?
do you think this software is usefull?
if so please contact me,
And please give me feedback.
Best Reguards
OPJ
This software`s maker : )
http://forum.xda-developers.com/tags.php?tag=mpe
does a similar thing. it's great to get off the screen-keyboard, back to the real thing ...
this is a copy of screencast, isn't it?
Greets!
Delete post
Any way to change installation folder? There is no 'Change...' button as of now and the folder path is greyed out.