Related
i following this step...
Long guide (for beginners)
- Download the attached ODIN file and extract the .zip file done with odin 1.85
- Download the attached XWKDD, but do NOT extract the .tar file
i saw my setting-about phone-kernel version 2.6.35.7-i9100dxkg3-cl375463rootdell147#2 ---->so i download KG3--->
CF-Root-SGS2_XX_OXA_KG3-v4.1-CWM4
- Download and extract SuperOneClick (Some say you should not be using the very latest version 1.9, but 1.5 or so) i think i'm not use it, so i not download it
- If you do not have Samsung's KIES 2.0 installed, download and install it. You need it to install the correct USB drivers, so the programs can communicate with the device. Reboot your computer after installation of KIES. done
- Make sure your device is in USB debugging mode: Settings -> Applications -> Development -> USB debugging done
- Reboot your device into download mode: Turn the device off, then power it on again by pressing and holding VolumeDown + Home + Power simultaneously. You will know when you are in download mode, it is really obvious done
- Start ODIN done
- Connect the device to your computer using USB done
- Wait a few seconds, the ODIN screen should show you that a device is now connected id:com--> 0:[com11]
- Make sure that in ODIN NOTHING is checked, except the "Auto reboot" and "F. Reset Time" checkboxes. Press the "PDA" button, and select the "XWKDD_insecure.tar" file. done
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot. device not reboot
- Wait until the device is rebooted, and while still being connected over USB, start SuperOneClick, and press ROOT.
- Reboot the device
- Done ! in odin, box in the top id:com-->FAIL(red colour)
are guys can help my problem? where is my fault?
budi5555 said:
i following this step...
Long guide (for beginners)
- Download the attached ODIN file and extract the .zip file done with odin 1.85
- Download the attached XWKDD, but do NOT extract the .tar file
i saw my setting-about phone-kernel version 2.6.35.7-i9100dxkg3-cl375463rootdell147#2 ---->so i download KG3--->
CF-Root-SGS2_XX_OXA_KG3-v4.1-CWM4
- Download and extract SuperOneClick (Some say you should not be using the very latest version 1.9, but 1.5 or so) done
- If you do not have Samsung's KIES 2.0 installed, download and install it. You need it to install the correct USB drivers, so the programs can communicate with the device. Reboot your computer after installation of KIES. done
- Make sure your device is in USB debugging mode: Settings -> Applications -> Development -> USB debugging done
- Reboot your device into download mode: Turn the device off, then power it on again by pressing and holding VolumeDown + Home + Power simultaneously. You will know when you are in download mode, it is really obvious done
- Start ODIN done
- Connect the device to your computer using USB done
- Wait a few seconds, the ODIN screen should show you that a device is now connected id:com--> 0:[com11]
- Make sure that in ODIN NOTHING is checked, except the "Auto reboot" and "F. Reset Time" checkboxes. Press the "PDA" button, and select the "XWKDD_insecure.tar" file. done
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot. device not reboot
- Wait until the device is rebooted, and while still being connected over USB, start SuperOneClick, and press ROOT.
- Reboot the device
- Done ! in odin, box in the top id:com-->FAIL(red colour)
are guys can help my problem? where is my fault?
Click to expand...
Click to collapse
Sorry you are to nOob to answer.
Google it or look hard
CF root auto roots, no need for 1 click as well, work it out from there.
are guys can help my problem? where is my fault?[/QUOTE]
Guess its your reading skills but as you dont say what method you used it is no more than a guess .
My guess is that on the first page it says this method is now obsolete and points you to this page .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
veyka said:
CF root auto roots, no need for 1 click as well, work it out from there.
Click to expand...
Click to collapse
sorry i don't use superoneclick... my mistake... i edit my post..
JJEgan said:
are guys can help my problem? where is my fault?
Guess its your reading skills but as you dont say what method you used it is no more than a guess .
My guess is that on the first page it says this method is now obsolete and points you to this page .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
i use http://forum.xda-developers.com/showthread.php?t=1056334
yesterday, i saw http://forum.xda-developers.com/showthread.php?t=1103399 too... but i think it's the same...
budi5555 said:
sorry i don't use superoneclick... my mistake... i edit my post..
i use http://forum.xda-developers.com/showthread.php?t=1056334
yesterday, i saw http://forum.xda-developers.com/showthread.php?t=1103399 too... but i think it's the same...
Click to expand...
Click to collapse
Use the CF root thread not the "And then there was root" thread.
Make sure no Kies proses are running, open task manager and kill them all or odin wont work
veyka said:
Use the CF root thread not the "And then there was root" thread.
Make sure no Kies proses are running, open task manager and kill them all or odin wont work
Click to expand...
Click to collapse
u right sir... my problem in task manager.. kies running on my PC... now, i already finish my root.... give thanks to you...
When i first got my phone back from repair i wanted to use download mode to put the CWM in and flash it. But when i first did it it started a download process is it normal?
2.3.6
What download process exactly?
Sent from my GT-I9100 using xda premium
In the middle
" Downloading ....
Do not turn off target"
It has some writing on the top left too would you like to know what it says?
nothing is downlading...it by default shows like that...when you start download from ODIN you can see the WRITING PROCESS TIMELINE under that logo
Could you please elaborate how do you put the CWM in while on the Download mode
Yep, as above. That is download mode. Now your try to connect to Odin (kill lies first). Edit: kies not lies (stupid Swype)
Sent from my GT-I9100 using xda premium
Oh Im just following these instructions.
- Unzip the attached CF-Root-xxx-vX.X.zip
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select CF-Root-xxx-vX.X.tar
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot
Im sorry its just my first time doing anything like this xD
yes instruction is correct,
Make sure dirvers are installed, Kies to be killed,
once you connected the phone to PC (connect to mother board USB socket backside)
the ID:COM box will be highlighted in yellow, and in the message box you can see "added"
Good luck...
Do you kill kies first then go into download mode?
Renren1403 said:
Do you kill kies first then go into download mode?
Click to expand...
Click to collapse
doesnt matter
Thanks. So i made sure i had drivers for my phone. I go into download mode without phone in. I start ODIN on pc then plug it in (my phone that is) but the ID:COM doesnt change. Am i doing something wrong?
OVer: 1.85
Renren1403 said:
Thanks. So i made sure i had drivers for my phone. I go into download mode without phone in. I start ODIN on pc then plug it in (my phone that is) but the ID:COM doesnt change. Am i doing something wrong?
OVer: 1.85
Click to expand...
Click to collapse
Odin must identify your phone first like said above..
uninstall the Kies, download the latest version from Samsung install after a PC reboot, after install reboot PC, (kill means not unistall, close the applicaion, also check in your system tray)
Renren1403 said:
Thanks. So i made sure i had drivers for my phone. I go into download mode without phone in. I start ODIN on pc then plug it in (my phone that is) but the ID:COM doesnt change. Am i doing something wrong?
OVer: 1.85
Click to expand...
Click to collapse
Ensure USB debugging is on (checked) on settings first so Odin well recognise.
Sent from my GT-I9100 using xda premium
Thank you that was the missing piece! Kies for PC lol! So how do i know if my phone was successfully rooted?
UpInTheAir said:
Ensure USB debugging is on (checked) on settings first so Odin well recognise.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I dont think i had debugging on. How do i know if its on?
Renren1403 said:
Thank you that was the missing piece! Kies for PC lol! So how do i know if my phone was successfully rooted?
I dont think i had debugging on. How do i know if its on?
Click to expand...
Click to collapse
if you have successfully flashed correct CF-root from ODIN, thats it, next is your duty to google for rooted applications.....
@ UpInTheAir : for my knowledge if I am not correct,
Download mod itself is a debugging mode, not essenstial to do it from Menu...
the people who did not enable the debugging mod and bricked the phone or stuck on boot logo have been flashing ROMs by enterin into download mod without any treble...
@ZACQ8
Thanks i installed a custom rom now and its working fine and dandy.
One last question. Could you point me to where i can find how to check flash counter and reset it? and re flashing stock roms increase flash counter? or really how do i get everything ready so i can return my phone to repair if the time calls?
Renren1403 said:
@ZACQ8
Thanks i installed a custom rom now and its working fine and dandy.
One last question. Could you point me to where i can find how to check flash counter and reset it? and re flashing stock roms increase flash counter? or really how do i get everything ready so i can return my phone to repair if the time calls?
Click to expand...
Click to collapse
to reset counter you need a Jig and old bootloader to flash, if the current one is new...
I will just borrow Mistahbungle's posts here dont forget to thank him..
http://forum.xda-developers.com/showpost.php?p=25124275&postcount=16
http://forum.xda-developers.com/showpost.php?p=25123832&postcount=13
Thanks so much
ZACQ8 said:
if you have successfully flashed correct CF-root from ODIN, thats it, next is your duty to google for rooted applications.....
@ UpInTheAir : for my knowledge if I am not correct,
Download mod itself is a debugging mode, not essenstial to do it from Menu...
the people who did not enable the debugging mod and bricked the phone or stuck on boot logo have been flashing ROMs by enterin into download mod without any treble...
Click to expand...
Click to collapse
Yes, you are correct thanks. Not much sleep lately
You need USB debugging for ADB commands .... Except for ADB when in recovery mode
Sent from my GT-P6810 using xda premium
need help to unrrot and install original software to my galaxy pocket s5300
i dont have backup to my original software
can any one help me ?
any help plzzzzzz
TRY USING ODIN AND FLASH ORIGINAL ROM
I had face with bootloop and i used ODIN to flash original rom and i needed to root again
I'm not sure about this ,so you pls ask more information with senior members
plz reply
thanks
Same issue.!
70usmus said:
need help to unrrot and install original software to my galaxy pocket s5300
i dont have backup to my original software
can any one help me ?
Click to expand...
Click to collapse
PLS ANYONE HELP i cant even use ODIN because my USB driver is not working even i download any software's for the drivers.
boohyucks said:
PLS ANYONE HELP i cant even use ODIN because my USB driver is not working even i download any software's for the drivers.
Click to expand...
Click to collapse
Drivers: Samsung Drivers
Download firmware: tsar3000 or Samsung
Download Odin: 4shared
Preparation:
Download all the above mentioned tools then extract and install USB drivers and reboot your PC, After that extract Odin and Firmware package to known place on your PC to use it in the following steps.
How to flash:
- Run Odin Flasher and check only these options: Re.Partition, Auto Reboot, F.Reset Time.
- Click PDA button and select PDA_S5300xxxxx_REV04.tar.md5
- Click PHONE button and select MODEM_S5300xxxxx_REV04.tar.md5
- Click CSC button and select GT-S5300-MULTI-CSC-Oxxxxx.tar.md5
- Put the phone into Download Mode: Volume Down + Home + Power.
- Connect the phone to your PC using the Original USB cable.
- Check that Odin flasher detects your phone's Com port number then continue to next step.
- Click Start button and watch Odin program during the update process, But do not interrupt it.
- The phone will be rebooted by Odin after all is done, Now you can disconnect it from PC.
- After your phone is fully on it is better to do Full reset by this code: *2767*3855#.
- Wait the phone to restart and then you can set it up the way you like.
Hello.
I cand find my s5830i in odin. I use the cable in download mobe but my pc have a messege to write . "Usb device not recognised" why my pc cant find my ace? I istall and unintsall kies smasung drivers and odin many, many times and I do all thins in win 7 ,8.1 and xp . I use for all this 2 computers. I have use odin again and I have not any problems before. Can anybody help me?
manos_mand said:
Hello.
I cand find my s5830i in odin. I use the cable in download mobe but my pc have a messege to write . "Usb device not recognised" why my pc cant find my ace? I istall and unintsall kies smasung drivers and odin many, many times and I do all thins in win 7 ,8.1 and xp . I use for all this 2 computers. I have use odin again and I have not any problems before. Can anybody help me?
Click to expand...
Click to collapse
It's usually the drivers. Please reinstall them again and try to see if your device can recognize it. Also make sure the usb cable is a working one. Do post the results. Hope I Helped
download latest samsung usb drivers, just search for it in google, in case you are using the latest version of Odin, i attached Odin3 v1.84 i've been using with my Ace-i since the latest version of Odin doesn't recognize my phone [silly really]
Just download a Stock ROM if you're device is bricked and do as follows
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
xlSKYFiRElx said:
download latest samsung usb drivers, just search for it in google, in case you are using the latest version of Odin, i attached Odin3 v1.84 i've been using with my Ace-i since the latest version of Odin doesn't recognize my phone [silly really]
Just download a Stock ROM if you're device is bricked and do as follows
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
Click to expand...
Click to collapse
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
manos_mand said:
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
Click to expand...
Click to collapse
Are you sure you have the latest drivers?
mahithm said:
Are you sure you have the latest drivers?
Click to expand...
Click to collapse
For odin yes.
For samsung drivers not.
Can you give me a link.
manos_mand said:
For odin yes.
For samsung drivers not.
Can you give me a link.
Click to expand...
Click to collapse
You can download all the drivers from the useful guide by @brijeshep. Head to the "How to install Stock Firmware?" part of the guide to access all the necessary parts of the download. Here is the link,
Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
manos_mand said:
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
Click to expand...
Click to collapse
Here's the www.4shared.com/rar/YEW-Bh1S/Samsung_Galaxy_Ace_GT-5830_USB.htm?locale=en
Press Thanks If I Helped...
Sk.vignesh said:
Here's the www.4shared.com/rar/YEW-Bh1S/Samsung_Galaxy_Ace_GT-5830_USB.htm?locale=en
Press Thanks If I Helped...
Click to expand...
Click to collapse
Thenx a lot ..
But if all this not work? What I can do?
manos_mand said:
Thenx a lot ..
But if all this not work? What I can do?
Click to expand...
Click to collapse
So did it work?
mahithm said:
So did it work?
Click to expand...
Click to collapse
No work
hi first uninstall kies and
try Samsung drivers package and then restart the pc ..
now download different version of odin and try ..it Will recognised ...
if error persists explain the type of error showing on the display ...
Sk.vignesh said:
hi first uninstall kies and
try Samsung drivers package and then restart the pc ..
now download different version of odin and try ..it Will recognised ...
if error persists explain the type of error showing on the display ...
Click to expand...
Click to collapse
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
manos_mand said:
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
Click to expand...
Click to collapse
Sadly you can't install stock rom from recovery
manos_mand said:
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
Click to expand...
Click to collapse
Why to install many times kies, doesn't required
As i see that your device is not recognised by the drivers ,
So now download PDA net drivers (search it on google )
After downloading and installing
Just connect your device to your PC and wait for a min to detect ( you ll get to see in Task Bar right corner icon)
Then Open Odin and try the rest.
Hitesh2626 said:
Why to install many times kies, doesn't required
As i see that your device is not recognised by the drivers ,
So now download PDA net drivers (search it on google )
After downloading and installing
Just connect your device to your PC and wait for a min to detect ( you ll get to see in Task Bar right corner icon)
Then Open Odin and try the rest.
Click to expand...
Click to collapse
new messege for me from PdaNet
error...
"Please make sure your phone is attached to the computer and usb debugging is enabled on the phone"
I am sure ...
manos_mand said:
new messege for me from PdaNet
error...
"Please make sure your phone is attached to the computer and usb debugging is enabled on the phone"
I am sure ...
Click to expand...
Click to collapse
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Hitesh2626 said:
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Click to expand...
Click to collapse
i format my coputer and then i brick my device!
before fomat it work fine.... then not
i mast uninstall kien?
i mast have install only pda net and samsung drivers install?
Hitesh2626 said:
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Click to expand...
Click to collapse
i have somthing now!!!
i flash a kernel nad i can get in the fierst mobile rom.
but i can flash anything other. i i flash other rom it stop at samsung logo!
if i flash again this kernel i get in this fierts rom!
nothing new from debugging
manos_mand said:
i have somthing now!!!
i flash a kernel nad i can get in the fierst mobile rom.
but i can flash anything other. i i flash other rom it stop at samsung logo!
if i flash again this kernel i get in this fierts rom!
nothing new from debugging
Click to expand...
Click to collapse
Ok so you now your on Stock Rom , so just now get into recovery > flash CWM > and take Backup
Then reboot your phone, after again get into recovery mod (e3 red one ) and do wipe data/cache then Reboot your device , After doing all , then flash custom Rom which ever you wanted.
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
yes!!! you can UNBrick it!!!
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
unbrick Samsung galaxy s3 mini
omkarfrozen said:
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
Click to expand...
Click to collapse
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Leon bernard said:
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Click to expand...
Click to collapse
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
will try it
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
how to access scatter loading file
Leon bernard said:
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Leon bernard said:
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Click to expand...
Click to collapse
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Leon bernard said:
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Click to expand...
Click to collapse
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
omkarfrozen said:
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
Click to expand...
Click to collapse
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Leon bernard said:
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Click to expand...
Click to collapse
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
omkarfrozen said:
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
Click to expand...
Click to collapse
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Leon bernard said:
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
Click to expand...
Click to collapse
follow this brick
Help me too
Leon bernard said:
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Click to expand...
Click to collapse
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
tebegaya said:
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
Click to expand...
Click to collapse
Hey guys am using samsung s3 mini GT I8190, i recently flashed cyanogenmode 5.1.1 on my device, it was working fine but i decided to do a nandroid back up and in the process my phone died. it cannot power on or go to downloading mode. When i connect to my laptop there is a sound that its connected but then it disconnects help please..
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Hello, i need some help. I have tried all but always shows faild...i even use a recovery.tar and the bar goes all the way to the end but when the procces its almost finish it shows FAIL.
What can i do?
I do have the firmwarew file and it does not work, thx