Related
Not the same as what Noob4Life is posting.
First of all, I'm in the UK and was running the stock 2.2 or whatever was the stock was for Orange in the UK a month back, until I finally decided to upgrade to CM7.
A few weeks went by, all was awesome. Until last week my Wifi stopped working, my bluetooth stopped working and my Mobile hotspot stopped working. And looking around on a few posts on here, it seems that it is hardware based.
So what I'm asking is, does anyone know of a way I can go back to the stock 2.3 that has just been released in the UK? So it seems like I never did anything to the phone and then I can see if it is infact hardware, or software based. So if it is hardware related, I'm hoping I'll be able to get a free repair / replacement, as I have insurance. But from what I've seen, it will cost me if I take it in with CM7 on.
Thanks for any help anyone is able to provide.
piemanpm said:
Not the same as what Noob4Life is posting.
First of all, I'm in the UK and was running the stock 2.2 or whatever was the stock was for Orange in the UK a month back, until I finally decided to upgrade to CM7.
A few weeks went by, all was awesome. Until last week my Wifi stopped working, my bluetooth stopped working and my Mobile hotspot stopped working. And looking around on a few posts on here, it seems that it is hardware based.
So what I'm asking is, does anyone know of a way I can go back to the stock 2.3 that has just been released in the UK? So it seems like I never did anything to the phone and then I can see if it is infact hardware, or software based. So if it is hardware related, I'm hoping I'll be able to get a free repair / replacement, as I have insurance. But from what I've seen, it will cost me if I take it in with CM7 on.
Thanks for any help anyone is able to provide.
Click to expand...
Click to collapse
I had that problem with cm7...so thought it was my phone. Tried a different rom....worked again...tried cm7 again. And it started working.....just reflash.....obviously wipe it.
Sent from my MB860 using xda premium
Like Sexywacko said, first try out a fruitcake or another rom - best to take the new AT&T with the corresponding radio found here.
If it still doesn´t work, try another one. If all goes bad, you have to get the SBF from the OrangeUK GB-Update found here - extract the system, boot and webtop + the radio and fastboot flash those. This comes as close to stock as you can get without using SBF+RSDlite...This post will help you.
And don´t be afraid - I read on multiple occasions, that people had no problem getting their unlocked/rooted devices repaired without any waranty-problems. Just don´t tell them!
Thanks for the help guys.
Just put Fruitcakes "2.3.5 System and Boot NO Webtop" on, and turning wifi on is still causing " error " and causing a reboot.
How do I install new radio things? I'm a complete noob at this, and only put Cyanogenmod on using a guide ( http://forum.xda-developers.com/showthread.php?t=1336232 )
And now it's stuck rebooting all the time because it's trying to turn Wifi on.
Flash the 36P radio from the Fruitcakes thread through CWM in the same way you flashed 2.3.5. Remember to wipe cache first in CWM.
Well installing the 36p seems to have done the trick. Thanks alot dude!
Updated to Fruit Cakes 2.3.5 System and Boot NO Webtop with ATT 1.77-36p radio. Seems to have fixed the problem.
Don't want to risk putting Cyanogen back on incase it stops working again.
Thanks for your help again guys
piemanpm said:
Updated to Fruit Cakes 2.3.5 System and Boot NO Webtop with ATT 1.77-36p radio. Seems to have fixed the problem.
Don't want to risk putting Cyanogen back on incase it stops working again.
Thanks for your help again guys
Click to expand...
Click to collapse
I am using CM7 weekly #3 with Faux stopgap+ 1.0GHz kernel and 36P radio with no issues. Works very well for me.
It's stopped working again. Stupid thing. Going to try and restore it to stock orange ROM and see if that fixes it.
Anyone able to help?
Think I'm just going to give up and " Accidently " drop my phone in the bath and claim on insurance. This having no wifi is doing my head in. I've tried CM7 with " ATT .91 Radio " and " ATT 1.77-36p " radios. And I've tried Fruitcakes 2.3.5 System and Boot NO Webtop with " ATT .91 Radio " and " ATT 1.77-36p " radios and still no success in getting wifi to work for over 2 hours without crashing my phone / not working again.
Motorola Phone Tools isn't picking my phone up properly, it's just picking up my IMEI number, not my Carrier or Model.
Must say I'm at my wits end.
Its obviously. A hardware issue do. A insurance clame. On it cause it sours like the radio is broken
Sent from my MB860 using xda premium
I'm afraid it's looking that way.
Well I've decided to try RSD as my last resort to try and get my phone wifi working. I unlocked the bootloader and installed cyanogen using this Guide. I then put Fruitcakes 2.3.5 System and Boot NO Webtop on and the radio mentioned in this Thread with little success at getting it fully working.
My phone info ATM:
System Info
4.5.133.MB860.ATT.en.US
Android Version
2.3.5
Baseband version
N_01.77.36p
Kernel version
2.6.32.9 [email protected] #2
Build number
4.5.133
I'm thinking of using this: http://forum.xda-developers.com/showpost.php?p=19657465&postcount=248
What I'm asking is, realistically, what is the chance of bricking?
Looking to do the same, currently unlocked and rooted running CM7.
Is it possible to install the official 2.3.4 orange UK and have it locked with root access removed?
arukanferu said:
Looking to do the same, currently unlocked and rooted running CM7.
Is it possible to install the official 2.3.4 orange UK and have it locked with root access removed?
Click to expand...
Click to collapse
I downloaded the latest RSD and downloaded this image
Booted phone up in RSD mode ( power button + Volume Up ) then plugged it into my computer. Waited for all the drivers to install. Opened RSD, loaded the image and set it going. Do not unplug it at all until it says " Please boot up phone manually " or something along those lines.
Once it'd done it was loop booting, so I booted it into Android Recovery after pulling my battery out ( Power Button + Volume Down ) and then pressed the Volume up and Volume Down buttons together to get the menu up, then chose " Wipe date/Factory reset " and then " Wipe cache partition " and let it boot up again. Didn't solve my Wifi problem though.
Phoned Orange up today, explained that my wifi, bluetooth and hotspot all stopped working and that I'd already done a factory reset and updated to gingerbread. The guy was shocked that I'd basically done everything on his menu to try and solve the problem. They are sending a guy out tomorrow to give me a replacement phone for £25 on my insurance. Winner!
ok, so i unlocked and rooted my rezound, everything was working 100%, then i start flashing diferent roms and it was conecting to wifi with no problems, however when i flashed ( or tried to flash ) a new kernel ( dont remember which one ) wifi stoped working for me, it scans but doesnt pick up any network. i went back to stock kernel and nothing, re-locked device and installed verizon factory Ruu for the rezound and Wifi still doesnt work. Im going crazy here please help, maybe im flashing the kernel wrong but re-locking and restoring to factory Ruu should have fixed it
I was also having the same issue and tried reinstalling kernals and nandroids. I was loading the kernal through Amon Ra interface directly and no matter what I did I still had issues. Sooo, I revised my recovery process and found that dummy me can't read instruction correctly. The issue was resolved after I did a factory reset on the rom (Ineffablis v1.0) then I followed the instructions for installing the kernal (I'm using the SmartassV2 kernal from dsb9938; flash from SD, then flashmethis file and finally through HBOOT, it's a process ok?), rebooted and I was able to get WiFi working again. I've had this issue whenever one of the additions I was trying did strange things to my phone and have sucessfully restored WiFi (about 10 times for this occurance). I've also had to do a hard reset (pulled the battery) and follow the process to get back to functioning. Hope this helps.
i locked the phone again, and ran the rezound stock Ruu and did factory reset, still not picking up any networks. the wifi doesnt give and error it scans and everything, but for some reason it just doesnt pickup any networks
If you read the complete directions when flashing a rom... They state you will need to flash the wifi module after a fresh install. So just flash the kernel over again and you will have wifi working.
Thanks a lot, finally got it working
Sent from my HTC REZOUND using xda premium
I'm having the same problem where my rezound won't find any networks. My bluetooth won't turn on either. How were you able to fix it?
thanks,
ron
Edit
Hi,
I have an Atrix4g international (Uk retail) which is rooted and unlocked. Until about a week ago I had been running Aura ROM with a days 1.45 kernel. This was all good but I experienced some 3g data problems.
In the end I got fed up of not being able to download pictures when I received an mms and decided to flash back to my original rom. Once done I thought maybe the over clock 1.45 kernel would work with the stock ROM. It didn't and failed but I then noticed my wifi showed error where it usually said connected.
I reflashed my stock room from my recovery backup and it started working ok again. Both times I flashed my recovery it said error with recovery but the phone details read as it did before when it had the original ROM as it was bought.
Since doing I this I have noticed my phone being really laggy.... I also noticein advanced task killer that I never seek to have more than 80mb free ram.
I checked this against task manager and titanium backup and they seem to agree with the figures tb actually said I was using 100% at one point.
I even tried a factory reset fearing the hard brick stories.
I have wiped the davlik and cache and perfomed a factory wipe from recovery mode
Looks like I have a problem..
Anyone got any ideas on how to rectify this.... Is it likely to be anything to do with partitioning???
You atrix geniuses out there are my last hope so I thank you in advance for any wisdom.
Are you using the stock Gingerbread ROM from your carrier? If so, it sounds like you might need to flash a kernel that has the international RAM fix. Try downloading and flashing this if you're on stock Gingerbread.
http://faux.androidro.ms/Atrix-GB-Kernel-024r-ext4-1.00GHz.zip
That's the 1Ghz kernel made by faux123 for Gingerbread ROMs. After you flash that check to see that you have more RAM available.
Sent from my MB860 using XDA
Thanks a million!!!
jadwv2210 said:
Are you using the stock Gingerbread ROM from your carrier? If so, it sounds like you might need to flash a kernel that has the international RAM fix. Try downloading and flashing this if you're on stock Gingerbread.
http://faux.androidro.ms/Atrix-GB-Kernel-024r-ext4-1.00GHz.zip
That's the 1Ghz kernel made by faux123 for Gingerbread ROMs. After you flash that check to see that you have more RAM available.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
You absolute diamond!
Thank you so much.... Perfect fix 556mb ram free and phones running as fast as a priest being chased out of the playground.
You guys on here give priceless advice (most of the time so glad peeps like you take the time to help peeps like me...
Magic!
I'm sorry but I saw the title and just heard this in my head....
Lag city chick, lag lag city chick.... (Tyga - Rack city... stupid song)
Don't ask.
Glad to see you've solved your problem though
Knock on effect??!!
Although I now have many many more rams than an Afghani goat hearder this process has thrown up another problem. The same error message is showing up where it usually says connected under wiring settings and wiring will not activate or connect.
Yes I was trying to flash back to my stock rom (via cm rom manager-reboot into recovery-restore.....)
Ok so the story continues...
after receiving your advice I flashed the file you linked to. And as I reported ram was up dramatically but then when I tried to connect to wifi it wouldn't. I went to settings -wireless settings- checked wiring on check box to turn it on and underneath in grey writing it threw up the message "error" where it usually says "connecting..." or "connected" etc
I went back through cmrm to recovery mode and did the wipe data-wipe cache-restore rom again but did not reflash the file you linked... checked wifi and worked but ram had gone again.
Went back into clement and went through whole process in one. Ie factory data wipe-wipe cache-restored ROM-flashed file you linked to....
Set up phone again checked wifi and still shows error. But my rams are back...
???? Puzzled!
Dont suppose you have an idea whats going on?
tehrules said:
I'm sorry but I saw the title and just heard this in my head....
Lag city chick, lag lag city chick.... (Tyga - Rack city... stupid song)
Don't ask.
Glad to see you've solved your problem though
Click to expand...
Click to collapse
Thats strange cos thats what I was thinking when I wrote it... lol
Problems not yet entirely solved though..... :-(
Desperation is now setting in
Just an update... and help to solve this is really appreciated.
I have trawled the site and others regarding wifi error.
People seem to suggest its a number of things either hardware or software flashing kernels roms radios wifi fix zips etc etc
I can confirm my problem is not hardware.
I flashed back to aura and wifi function is back. And rams up to normal.....
but I have the original problem I cannot send or download pictures when received via mms.
Is there a fix for this?
I assume not and so therefore would like to ask the question does anyone know of a Stock ATRIX international (uk) retail Rom that is compattable with an ATRIX international (uk) retail phone that has been rooted and unlocked.
For some reason my recovery must be corrupt and is giving me jip.
Maybe someone knows why my recovery isn't working and knows how to fix it?
Thanks all in advance...
When I had the problem with wifi reporting just "error", I fixed it by just redownloading the kernel and reflashing it. Maybe try another recovery if that doesn't work, but I don't know why it wouldn't. :|
The wifi problem is most likely the kernel. Since you are on Aura now though with no data or MMS I would recommend changing your APN settings. Try googling the correct APNs for your carrier and changing them under Settings>Wireless and Networks>Mobile Networks>Access Point Names.
Sent from my MB860 using XDA
Dcskeete said:
I assume not and so therefore would like to ask the question does anyone know of a Stock ATRIX international (uk) retail Rom that is compattable with an ATRIX international (uk) retail phone that has been rooted and unlocked.
For some reason my recovery must be corrupt and is giving me jip.
Maybe someone knows why my recovery isn't working and knows how to fix it?
Thanks all in advance...
Click to expand...
Click to collapse
Why dont you try Nottachtrix if you want a blur based rom, or Neutrino for a cm7 based rom?
What recovery are you using? If you arent using Romracers recovery, try flashing his and seeing if his recovery fixes your problem.
I know there's a few posts on this, but looking for advice specific to my symptoms. The problem started off with Android media process using up a lot of cpu each time the phone was powered on. It gradually got worse and started rebooting when this happened. Started off as once or twice a day. Then got worse and worse. I had been on a bell atrix ROM (2.3.6) for about a year.
Tried flashing a number of roms, and making sure to clear caches and factory reset each time. Tried numerous versions of the CWMRecovery, no good. I notice that it noly seems to restart if it tries to communicate wirelessly (wifi or 3g seemingly). If I just leave it in cwmrecovery, it stays on fine. If I leave it at the first motoblur setup screen, without entering wifi settings, it stays on fine.
So I guessed it may be related to the radio. Installed a UK radio, bell original one and a euro one to no avail
Is there anything else I can do before I give up, or is it hardware?
cruhoortwunk said:
I know there's a few posts on this, but looking for advice specific to my symptoms. The problem started off with Android media process using up a lot of cpu each time the phone was powered on. It gradually got worse and started rebooting when this happened. Started off as once or twice a day. Then got worse and worse. I had been on a bell atrix ROM (2.3.6) for about a year.
Tried flashing a number of roms, and making sure to clear caches and factory reset each time. Tried numerous versions of the CWMRecovery, no good. I notice that it noly seems to restart if it tries to communicate wirelessly (wifi or 3g seemingly). If I just leave it in cwmrecovery, it stays on fine. If I leave it at the first motoblur setup screen, without entering wifi settings, it stays on fine.
So I guessed it may be related to the radio. Installed a UK radio, bell original one and a euro one to no avail
Is there anything else I can do before I give up, or is it hardware?
Click to expand...
Click to collapse
just had a look around and came across this http://forum.xda-developers.com/showthread.php?t=1884381 . Forgetting the Jb reference it might be an idea to follow the steps and see if that helps.
If it were me, I would do a complete system wipe first (CWM>mounts and storage>format system,data,preinstall,osh) and then reinstall a rom (I would recomend CM7.2 to start). I also might be inclined to take the external sd card out as well before restarting phone and see if that helps (going down the corrupt media file route)
Good Luck!
barry_ said:
just had a look around and came across this http://forum.xda-developers.com/showthread.php?t=1884381 . Forgetting the Jb reference it might be an idea to follow the steps and see if that helps.
If it were me, I would do a complete system wipe first (CWM>mounts and storage>format system,data,preinstall,osh) and then reinstall a rom (I would recomend CM7.2 to start). I also might be inclined to take the external sd card out as well before restarting phone and see if that helps (going down the corrupt media file route)
Good Luck!
Click to expand...
Click to collapse
Thanks for this, I never spotted the mounts and storage section for formatting before. Looks to be good to get a clean wipe
Will try now
I managed to get the MROM rom on to it, and it has stayed on for about 30mins now with wifi on.
However, it doesn't boot normally, it says 'Modem did not power up, starting RSD protocol support'. I have to choose Boot Android (no BP) to get it to boot ok. What would make it fail like this?
Is there any way to make the phone always boot android by default?
Another thing to add: I can't add any APN. If I add one and save, it doesn't save.
cruhoortwunk said:
I managed to get the MROM rom on to it, and it has stayed on for about 30mins now with wifi on.
However, it doesn't boot normally, it says 'Modem did not power up, starting RSD protocol support'. I have to choose Boot Android (no BP) to get it to boot ok. What would make it fail like this?
Is there any way to make the phone always boot android by default?
Another thing to add: I can't add any APN. If I add one and save, it doesn't save.
Click to expand...
Click to collapse
I can see that i am missing a boot.img to make it boot properly. Where can I download it?
A boot image always comes with any ROM, and MROM is no exception. If you sucessfully flashed the ROM, you've flashed the boot image too, I'm not sure why you think it's missing. But if you really want to reflash it, you can always extract it from the ROM's zip file.
ravilov said:
A boot image always comes with any ROM, and MROM is no exception. If you sucessfully flashed the ROM, you've flashed the boot image too, I'm not sure why you think it's missing. But if you really want to reflash it, you can always extract it from the ROM's zip file.
Click to expand...
Click to collapse
Alright, looks like I misunderstood the function of the boot.img. Any idea as to why it would not load the OS without me prompting it to boot android with no bp?
What is the best process to follow before flashing a rom?
I was doing factory reset,clearcache and clear dalvik from CWM. And I have started doing CWM>mounts and storage>format system,data,preinstall,osh now too.
Is that sufficient to get a good clean slate to start fresh?
And what's the best way to flash the radio? I have tried moto-fastboot radio radio.img, but that seems to stop the OS from loading. I assume the radio be installed after the ROM?
Tried an older gingerbread Bell rom, and same problem. I can only get it to boot by choosing boot android(no bp).
I also can't add an APN to it. I create it, save it and it doesn't save it to the list.
Found a fix here for the APN problem on ICS, but wondering if there's an equivalent on Gingerbread?
'Settings --> More... -> Uncheck 'Enable alt OEM telephony code' and 'Enable alternate getIMSI code'. Then reboot, and now you can add your own apn. '
No idea really, sorry. Kinda seems to me for some reason it's your bootloader that's having issues, not the ROM.
Still cant get it working, can't add an APN.
Replaced the SIM, same.
Noticed that the IMEI and baseband are listed as unknown, and think it's related. So I tried flashing a few radios.
Bell radio stays on about a min, then reboots phone
UK radio reboots once OS has loaded
French radio reboots once OS has loaded
I am based in Ireland, using a phone that was originally Bell Canada. Which radio should I try flashing?
Have you tried AT&T 36p or 37p radio?
No dice. What is the standard process with the radio zip? I have been extracting to a folder, then using moto-fastboot to clear the cache, then install the radio.
Am I missing a step or 2?
Why were you extracting it? Most radios come in a flashable ZIP, which means you flash it through recovery. No extracting.
I always got an error trying to install the zip in CWM. So installed img from fastboot instead. I'll try the newer zips from CWM.
cruhoortwunk said:
I always got an error trying to install the zip in CWM. So installed img from fastboot instead. I'll try the newer zips from CWM.
Click to expand...
Click to collapse
I get error 'assert failed' ...status 7.installation aborted..'trying to install both ATT radio zips via CWM, and status 0 trying Bell radio zip
Update on this:
I got a new phone a few days ago, and had trouble adding an APN (same problem it wouldn't save). Problem was it was not reading the sim correctly. I had some sellotape on part of the card. Removed this, and I was able to add the APN no problem.
I have cleaned the contacts on the sim card reader, no luck.
I am convinced that this is the faulty part though. When I go to add an APN, it should automatically populate the MCC and MNC from the sim, but it doesn't.
Sorry to bump an old thread but...
I have left this Atrix aside for a few months,and wanted to try it once more before giving up entirely.
It reboots when I use 3g or wifi. If I leave it offline or in cwm mode, it stays on ok.
Any ideas? Is it definitely hardware? (Have tried about 4 different images)
cruhoortwunk said:
Sorry to bump an old thread but...
I have left this Atrix aside for a few months,and wanted to try it once more before giving up entirely.
It reboots when I use 3g or wifi. If I leave it offline or in cwm mode, it stays on ok.
Any ideas? Is it definitely hardware? (Have tried about 4 different images)
Click to expand...
Click to collapse
Does it reboot if you put it in Airplane mode, then connect to WIFI only?
My Atrix randomly reboots if I have the cellular radio on, but if I put it in Airplane and only use WIFI, its very stable. I tried dozens of radios and ROMs, nothing seems to help, so I've chalked it up to some flaky hardware.
*READ BELOW FOR A GUIDE TO FIX*
I've had my note for over a year now and i have had it rooted pretty much the entire time. Never any problems with it up until recently it started doing this thing where it would keep restarting. It would boot up and less than a minute later just restart. Off and on for a few days it was doing this. I was still running 2.3.6 at that point. So i decided to push 4.0.4 via odin since kies didnt support the firmware. Everything was working fine for a few hours then all of the sudden "the ring of death" showing me no service. Went through the phone and noticed it was saying there is no sim inserted. Tested sim on another phone. Works fine. Since then ive figured out via kies i can recovery and update firmware. Tried that. No Bueno. Now im to the point where im on 4.0.4 with no service. I've scoured through forums trying all kinds of different things, pushing different roms and modems via odin and cwm. Still no bueno.
Baseband version
Unknown
Kernel Version
3.0.8
Build Number
IMM76D.UCLF6
If anyone can give me ideas im willing to try them out.
Thanks.
I got it working so heres a direction for anyone else who has this issue!
Replaced Sim&SD card reader-No fix
After flashing all kinds of roms & modems still same issue saying no sim inserted.
Do a hard reset through your settings.
Flash cwm and put the radio from this link on your sd card. Use cwm to flash the radio.
Flash rom http://forum.xda-developers.com/showthread.php?t=2261598 via odin.
The first try i got an error during flash and got stuck on the software download error screen.
Reflashed the JB rom.
After its flashed flash clockwork recovery.
Enter cwm and do a factory reset. Clear cache. Clear dalvik cache. Reboot system.
If you get service, turn off phone. enter cwm and do a backup.
Reboot system.
It should be working.
If not restart and make sure to do a factory reset through your settings in the phone before reflashing rom.
Got the Phone up and running for about 30 mins.
After battery removed it reverted back to no sim card inserted.
Kept reflashing rom until it worked again.
Flashed cwm.(ClockworK recovery mod)
Deleted cache, dalvik cache
Backed up via cwm
If it reverts back to no sim after that restore using the cwm backup.-it worked for me
Now for the tricky part, my phone was getting crappy service...
So heres what i did to fix it.
Settings-more settings-mobile networks-access point names-click on the apn.
Name-
ATT Phone
APN-
Phone
Proxy-
Not set
Port
Not set
User Name-
Not set
Password-
Not set
Server-
Not set
MMSC-
http://mmsc.mobile.att.net
MMS Proxy-
proxy.mobile.att.net
MMS Port-
80
MCC-
310
MNC-
410
Authentication type-
None
APN type-
default,admin,fota,mms,supl,hipri,internet
APN protocol-
IPv4
Enable/disable APN-
(check mark)
Bearer-
Unspecified
Hope this helps anyone else having this issue.
I believe I've read something like this before. I think they fixed it by starting over from scratch. Try returning to stock thru Odin. Then root and flash rom of choice.
440bro said:
I believe I've read something like this before. I think they fixed it by starting over from scratch. Try returning to stock thru Odin. Then root and flash rom of choice.
Click to expand...
Click to collapse
I Started from scratch via "kies emergency recovery".
No luck.
dweeezy said:
I Started from scratch via "kies emergency recovery".
No luck.
Click to expand...
Click to collapse
did you try rolling back to GB? it could be a bad port on your phone. that was my problem.
Stuck power button. Your pants are too tight.
Theoriginalgiga said:
did you try rolling back to GB? it could be a bad port on your phone. that was my problem.
Click to expand...
Click to collapse
i ordered a new sim port to see if that works. what is gb?
Same situation...finally went to ATT and had a "new" phone sent under warranty. Of course NOW I'm pulling my hair out trying to migrate everything over to the new phone. I rooted and every ROM I try and install aborts. **** me. I don't even know where to start anymore
dweeezy said:
i ordered a new sim port to see if that works. what is gb?
Click to expand...
Click to collapse
GB stands for Gingerbread which was the first version of the OS that came with the phone. I believe the number was 2.3.6 (you can take a look in the about section in the settings and it'll tell you what you're currently running). ICS is Ice Cream Sandwhich which for our phone was 4.0.4 i believe. Jelly bean just came out today which you can use Kies to upgrade to and that I believe is 4.1.2. The numbers don't really mean a think, just the classification of what the OS is so if your phone reads something else (say 2.3.4) assume your phone is right and I'm wrong. I can't remember OS versions to save my life haha.
But you can use Kies to do an emergency recovery and I THINK it'll install Gingerbread. that's where I'd start, then test it, and then move to ICS and test, and then move to JB and test. I know long tedious process, but sometimes it's necessary. Imagine how fun I am to talk to on the phone while troubleshooting a computer :laugh:
redman9 said:
Same situation...finally went to ATT and had a "new" phone sent under warranty. Of course NOW I'm pulling my hair out trying to migrate everything over to the new phone. I rooted and every ROM I try and install aborts. **** me. I don't even know where to start anymore
Click to expand...
Click to collapse
what I use to migrate, and I between roms at least once a week with a full wipe because I rely on my phone being stable.
SMS and call logs: SMS Backup + (saves your call logs and sms to your gmail account. Makes a label for it and everything, pretty sweet. You can also restore from it. it takes about an hour for me to restore at 7000+ text messages).
pictures/media: stored on SD card
apps: if rooted and rommed I use titanium backup and run 2 sets. those which I want to keep my data like sms backup + to make restore easier and those I don't care about the data like google voice. If you're stock, just remember to check the little box in the beginning saying backup this phone to google (or something like that) and the next time you have to restore tick the box that says restore from google (or something like that) and it'll reinstall your apps. Mind you not the info, but it'll give you a head start.
As with your issue with installing roms. If you're using CWM i highly recommend switching to TWRP, not saying it's better in fact I like CWM better, but TWRP is the best for our roms and phone. If you have no clue what I mean by CWM or TWRP, read the all info sticky about how to rom thy phone.
I hope that helps.
Thanks OG. Yes, I know CMW and TWRP. I used to switch ROMs a lot. Finally stuck with Collective's latest (the orange one) pretty happy with it except that it's major glitch seems to be reboots whenever an app updates. So I figured unchecking auto update in Gstore should handle that.
You're saying I should try rooting w Odin again, install Superuser, then use TWRP to flash with? I'll be happy to read another 4 hrs of posts/stickies if that'll get me sorted out. I don't expect people like yourself to spend your day helping me. I'm very thankful for your tips here.
I've poured thru the "All things Gnote" threads and Noob Guides. They can be confusing as they always link out to many different threads. There is hardly ever a "Here are the steps 1. 2. 3. 4. 5.
Thanks again OG.
redman9 said:
Thanks OG. Yes, I know CMW and TWRP. I used to switch ROMs a lot. Finally stuck with Collective's latest (the orange one) pretty happy with it except that it's major glitch seems to be reboots whenever an app updates. So I figured unchecking auto update in Gstore should handle that.
You're saying I should try rooting w Odin again, install Superuser, then use TWRP to flash with? I'll be happy to read another 4 hrs of posts/stickies if that'll get me sorted out. I don't expect people like yourself to spend your day helping me. I'm very thankful for your tips here.
I've poured thru the "All things Gnote" threads and Noob Guides. They can be confusing as they always link out to many different threads. There is hardly ever a "Here are the steps 1. 2. 3. 4. 5.
Thanks again OG.
Click to expand...
Click to collapse
No problem always happy to help. since you're used to this sorta thing you don't need to use odin again and reroot. What you can do is either install TWRP through CWM using this file here:
http://goo.im/devs/OpenRecovery/sgh-i717/openrecovery-twrp-2.5.0.0-quincyatt.zip
Or you can install Goo manager, click settings and select Install OpenRecoveryScript (though that's only 2.4.4.0 the link above is 2.5.0.0)
That should change you over to TWRP. and like always do a nandroid backup and then flash to your heart's content!
fixed!
dweeezy said:
fixed!
Click to expand...
Click to collapse
How ?
galinha said:
How ?
Click to expand...
Click to collapse
i have the same issue.....i kn0w its n0t an hardware issue....my ph0ne is fairly new never dr0pped and this started happening 3 days after i p0rted black star jb alpha
I have this same issues ive tried flashing everything ive tried a new sim and replaced the card reader.
What works consistently for me if to flash the latest modem everytime i have to reboot or boot the note. Its my daughters phone now and she drains the battery regularly if it boots after charging or it needs to be rebooted for whatever reason it will come up with the no sim card error. If i flash the modem thru recovery it will work for that boot but only as long as I dont reboot or shut the phone off, then i will have to flash the modem again.
Not fixed
All. This is not fixed. I am having the same issue and if you follow the guide, it works for a day maybe regardless of what rom is loaded or what modems. Has anyone found a real solution to this yet??
i717 running stock GB or ICS or JB roms...
Thanks!
I have the exact same issue. Replaced the sim/sd card slot and still no dice ): Flashed to stock and back. Nope. Still won't work
Kraize said:
I have the exact same issue. Replaced the sim/sd card slot and still no dice ): Flashed to stock and back. Nope. Still won't work
Click to expand...
Click to collapse
I'm having the same problem. There seems to be no set way to get it back to working. Basically any reboot of the phone produces a no sim card error. I have tried flashing the modem through recovery as it was mentioned that will fix the problem. That did not work for me. What does work, sometimes, is one of the following:
1. Full wipe and reinstall
2. Restore backup from Recovery
3. Fix permissions
I just keep doing one of the above listed and eventually it works. However if the phone reboots then it's back to the carousel of trying these options to get it back to working.
I'm running Padawan JB V2
I honestly have no idea what's causing it. I haven't tried to fix permissions before to fix this issue, but if I go into recovery and install the modem again and reboot, it works fine for a while (and by a while, I mean like a few hours at max).
Just started having this issue, myself...after flashing Tmo_SGH-T989_VKL1_radio_ATTNOTE.zip modem on my phone...restoring from a prior backup...
Restoring a backup will not change your modem.