Can i flash new kernel to my s2 ICS XXLPS , to get root and CWM , AND THEN FLASH gb ROM?
You need to flash stock Gb rom and them install Gb rooted kernel with cwm and busybox.
Sent from my Galaxy S2 GT i9100
boki9999 said:
You need to flash stock Gb rom and them install Gb rooted kernel with cwm and busybox.
Sent from my Galaxy S2 GT i9100
Click to expand...
Click to collapse
Okey , thanks But when flash rom GB kernel dont flash by it self of zip?
vanillaLVL said:
Can i flash new kernel to my s2 ICS XXLPS , to get root and CWM , AND THEN FLASH gb ROM?
Click to expand...
Click to collapse
u mean stock GB rom or the custom One?
if its stock GB then dwnld the firmware(GB) and flash thro ODIN instead after following the ODIN flash instruction of the same.
if its custom GB rom then u can flash the same thro CWM after reading the installation procedure in the OP of that rom thread
Sun90 said:
u mean stock GB rom or the custom One?
if its stock GB then dwnld the firmware(GB) and flash thro ODIN instead after following the ODIN flash instruction of the same.
if its custom GB rom then u can flash the same thro CWM after reading the installation procedure in the OP of that rom thread
Click to expand...
Click to collapse
Okey , i can just then flash Custom GB zip ?
vanillaLVL said:
Okey , i can just then flash Custom GB zip ?
Click to expand...
Click to collapse
in order to flash custom Gb rom zip ur phone has to be rooted priorly.
Sun90 said:
in order to flash custom Gb rom zip ur phone has to be rooted priorly.
Click to expand...
Click to collapse
Okey it will be dine by installing ROOTED ICS kernel with odin?
Yes. I recommend Siyah 3.5.2.
Sent from my Galaxy S2 GT i9100
Okey , all is workin great , thank you for fast respound
Im was afraid because it is my friend phone
Actually you don't need root/custom kernel to flash a rom.
1. Get this
2. Get the rom zip you want
3. Place both in external sdcard
4. Go to stock recovery (when phone is off, hold home + power + volume up button)
5. Flash the first zip (recovery)
6. New recovery opens
7. Do a backup to be safe
8. Wipe data/cache or factory reset
9. Flash the from zip
8. Reboot
9. If you need to go back to ICS do a restore
With this method you will not have the yellow triangle or custom binary
Related
Hi,
I've got 2 questions :
-Can i update my Samsung Rom to CM9 with :
1-boot on recovery mode
2-Load "CWM.zip", i've download on XDA
3-Load CM9.ROM.ZIP
4-Reboot
-Can i change the kernel on Samsung ROM ?
bbk said:
Hi,
I've got 2 questions :
-Can i update my Samsung Rom to CM9 with :
1-boot on recovery mode
2-Load "CWM.zip", i've download on XDA
3-Load CM9.ROM.ZIP
4-Reboot
-Can i change the kernel on Samsung ROM ?
Click to expand...
Click to collapse
in order to install CM9 rom u have to first root ur Phone using a CF-root Kernel
since Cm9 cannot be flashed with Stock recovery as it needs Custom recovery
so first root ur phone and then install CM9
My phone is already root. (with any PC )
CWM.zip is a ClockWorkMod in a ZIP to load in memory a CWM-recovery 5.X
What is a CF-Root kernel ?
bbk said:
My phone is already root. (with any PC )
CWM.zip is a ClockWorkMod in a ZIP to load in memory a CWM-recovery 5.X
What is a CF-Root kernel ?
Click to expand...
Click to collapse
CF- chain Fire-Root kernel will root ur phone and install custom recovery on ur Phone
so if ur phone is already rooted then install the CWM.zip file, then reboot into cwm recovery and install the CM9 zip file
before that in cwm recovery make a nandroid bkp of ur exsisting rom first
and also follow the instructions of flashing CM9 rom carefully form there thread OP
Thanks, i will try in 2 days
help needed
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
my i9100 also has the BrickBug Chip issue
bkhaliq said:
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
Click to expand...
Click to collapse
You root it using the same method as before, I assume via ODIN, but with an LP7 CF-Root kernel.
bkhaliq said:
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
Click to expand...
Click to collapse
Try flashing a PDA which has a CF-root available ( via PC-ODIN).
Then flash the CF root to gain root and CWM.
CWStJNobbs said:
You root it using the same method as before, I assume via ODIN, but with an LP7 CF-Root kernel.
Click to expand...
Click to collapse
Thanks for the effort
please tell me from where can i get the
LP7 CF-Root kernel
help needed
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
my i9100 also has the BrickBug Chip issue
Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
XCQT said:
Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
Click to expand...
Click to collapse
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Jokesy said:
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Click to expand...
Click to collapse
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
XCQT said:
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
Click to expand...
Click to collapse
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
XCQT said:
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Jokesy said:
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thank you so much. Got it up and running
CWM not getting installed
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Jay_7 said:
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Click to expand...
Click to collapse
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
TheATHEiST said:
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
Click to expand...
Click to collapse
M sorry bt i got that so what can i do to install the latest CWM ???
Jay_7 said:
M sorry bt i got that so what can i do to install the latest CWM ???
Click to expand...
Click to collapse
It doesnt matter, you have no reason to have latest, they are just updates to support more devices.
Just flash custom kernel, like latest Siyah, the kernels contain CWM.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
for step 1, we are installing a temp CWM for flashing kernel in step 2?
phone stuck in restarting when flashing cwm
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Flash siyah v6.
Sent from the little guy
gastonw said:
Flash siyah v6.
Sent from the little guy
Click to expand...
Click to collapse
Is this for me?...sorry...I didn't catch you.......Can you please elaborate or any link for my phone model and download links
---------- Post added at 07:52 AM ---------- Previous post was at 07:12 AM ----------
sunyreza said:
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Click to expand...
Click to collapse
can anybody help with details.........my phone is likely dead man.........
Yes it was meant for you, flash siyah v6 .tar version via Odin.
Sent from...this is not even my S2
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
tissaoui said:
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
Click to expand...
Click to collapse
I assume you are talking about PhilZ recovery........
If all you want is a custom recovery on a stock firmware then you have to match the recovery to the firmware build......
And you *do* realise that the leak/test firmware is not as stable as release firmwares don't you?
http://i.imgur.com/rVnFwJM.jpg
Ok i need to know which stock rom is ok to flash through my micro sd card,becuase odin doesnt want to reconizge my galaxy s2 9100,the reason why??it was updating to ice cream 4.0.3 went to 48% and stop and now its stock on boot screen,but it will go to stock recovery and downloading mode but my reconizge!!please help!!
**what rom is flashable to put a stock rom that stock recovery will install??thanks
raylusion said:
Ok i need to know which stock rom is ok to flash through my micro sd card,becuase odin doesnt want to reconizge my galaxy s2 9100,the reason why??it was updating to ice cream 4.0.3 went to 48% and stop and now its stock on boot screen,but it will go to stock recovery and downloading mode but my reconizge!!please help!!
**what rom is flashable to put a stock rom that stock recovery will install??thanks
Click to expand...
Click to collapse
Do u have Kies and with it all USB driver for it installed?!
If no, ur phone can't be found from ur PC.
CHEERS
so theres no rom for stock recovery?still doesnt want to reconizge
CheckFus + Odin
raylusion said:
Ok i need to know which stock rom is ok to flash through my micro sd card,becuase odin doesnt want to reconizge my galaxy s2 9100,the reason why??it was updating to ice cream 4.0.3 went to 48% and stop and now its stock on boot screen,but it will go to stock recovery and downloading mode but my reconizge!!please help!!
Click to expand...
Click to collapse
Stock rom using Checkfus and install using Odin is the best option.
But what ever be the STOCK ROM you are going to flash, be aware of the fact that 4.0.4 has dangerous "mmc_cap_erase" that can potentially lead to hard brick. So take care not to wipe anything from recovery.
(4.0.3 might be a good option)
raylusion said:
Ok i need to know which stock rom is ok to flash through my micro sd card,becuase odin doesnt want to reconizge my galaxy s2 9100,the reason why??it was updating to ice cream 4.0.3 went to 48% and stop and now its stock on boot screen,but it will go to stock recovery and downloading mode but my reconizge!!please help!!
**what rom is flashable to put a stock rom that stock recovery will install??thanks
Click to expand...
Click to collapse
for stock rom look here : http://www.sammobile.com/firmware/?page=3
ysrini said:
Stock rom using Checkfus and install using Odin is the best option.
But what ever be the STOCK ROM you are going to flash, be aware of the fact that 4.0.4 has dangerous "mmc_cap_erase" that can potentially lead to hard brick. So take care not to wipe anything from recovery.
(4.0.3 might be a good option)
Click to expand...
Click to collapse
boss i m custom ROM ics 4.0.4 with Rooted,, i want to go for official GB Stock Rom.. should i install it throug Odin ??? my root will be remove or not ???
enchanterloafer said:
boss i m custom ROM ics 4.0.4 with Rooted,, i want to go for official GB Stock Rom.. should i install it throug Odin ??? my root will be remove or not ???
Click to expand...
Click to collapse
Check here and here
If you flash a stock rom your root will be removed. You can root again.
Hey guys,
I have just need some help.
I got a s2 4.0.4 (no root) and would like to install the disaster custom rom.
Because i have 4.0.4 and can brick my phone i need some helps/tips..
So as i understand i need cwm to flash the custom rom.
To get cwm i need root. Well, which root methode should i use?
I want one with cwm and supersu in it.
Oh, and after i have root on the 4.0.4 and flash the 4.1.2 custom rom do i keep my root?
HAKANN said:
Hey guys,
I have just need some help.
I got a s2 4.0.4 (no root) and would like to install the disaster custom rom.
Because i have 4.0.4 and can brick my phone i need some helps/tips..
So as i understand i need cwm to flash the custom rom.
To get cwm i need root. Well, which root methode should i use?
I want one with cwm and supersu in it.
Oh, and after i have root on the 4.0.4 and flash the 4.1.2 custom rom do i keep my root?
Click to expand...
Click to collapse
Just dwnld the 'Siyah kernel v4.1.5 or v5.0.1' (tar file for ODIN) and flash the same thro 'Odin' on ur pc.
It will automatically Root ur phone and install 'SuperSu' and latest CWM recovery for u.
then using the cwm recovery of siyah kernel u can flash any custom rom of ur choice.
after flashing the custom rom based on 4.1.2 u wont loose ur root
ps- once u install custom kernel like siyah ur phone will be safe from the 'Brick Bug' issue for sure
Flashed the Siyah Kernel.
About to flash custom rom
but got one finally question.
The custom rom; http://forum.xda-developers.com/showthread.php?t=1498017
Says it has philz kernel or whatever
so can i still flash it? and does it change my kernel?
Does it have a effect on me?
HAKANN said:
Flashed the Siyah Kernel.
About to flash custom rom
but got one finally question.
The custom rom; http://forum.xda-developers.com/showthread.php?t=1498017
Says it has philz kernel or whatever
so can i still flash it? and does it change my kernel?
Does it have a effect on me?
Click to expand...
Click to collapse
Yes, u can flash it and the Kernel (philz) that comes with that rom will replace ur Siyah kernel for sure but u wont loose ur root
it will not have any effect on u though
do follow the install instruction for a successfull flash of the rom.
Cheers!!
Thanks, it works!!
HI
I have Galaxy s2 with android 2.3.5. I want flash OMNI 4.4 rom on it..but before that I want to flash latest CWM recovery on my S2. And also my S2 doesn't have root access So the problem is
Can I flash latest CWM recovery when my S2 have android 2.3.5. ? or should I update official ICS from OTA before flash ?
(I'm planning to use ODIN to flash CWM)
thanks
Click to expand...
Click to collapse
Step 1 - flash CF kernel which is appropriate to ur baseband with Odin
Step 2- Flash cutom rom what ever u want
Step 3 - Flash Gapps..
Thats all :good:
You can flash CWM and then the custom ROM now itself, without upgrading to ICS. Just make sure you flash the correct rooted kernel for your baseband version. Don't directly flash any CWM or use ROM manager. Good luck!
immortalneo said:
You can flash CWM and then the custom ROM now itself, without upgraing to ICS. Just make sure you flash the correct rooted kernel for your baseband version. Don't directly flash any CWM or use ROM manager. Good luck!
Click to expand...
Click to collapse
My details
Baseband version - I9100BUKI1
Kernal Version - 2.6.35.7-I9100BUKJ3-CL647431 [email protected]#2
Build number - GINGERBREAD.BUKJ3
So can anyone give me correct CWM recovery to my S2 ? (I just want to flash kitkat rom.. )
And you can't search for this why exactly ? You've been here more than long enough to know how things work.
Flash Gustavo's kernel first and then follow instructions on the omni thread for flashing as a first time user.
Search around and you will find everything here itself.
I'd suggest flashing the latest stock rom via Odin, ms1 I believe. Then flash philz kernel. Then boot into recovery, (while your new rom cwm zips are on your SD card) format system, preload, data and cache. Then flash the omni rom zip, and the correct gapps, and any other mods you would like.
Sent from my GT-I9100 using Tapatalk 4