I've got the HTCDev unlocked bootloader and S-ON with Amon-RA 3.15. Now that the OTA has dropped, and the firmware/radio versions are confirmed, can I somehow update the firmware from GB to ICS while keeping my current ROM (CleanROM DE 1.4) intact? The only reason I care is because I have an app I use at work, for which I have to go through channels to get the auth key for, and each time I install the app I need that done. I'm holding out requesting another key until we get an AOSP/AOKP/CM JB ROM.
I'd try S-OFF again, but I really borked it last time, bricking my phone during the wire trick (and getting a replacement). But anyway, can the firmware be updated without affecting the ROM? I'm guessing not, but I haven't seen a definitive answer anywhere.
Thanks!
I believe this is the stock recovery someone please confirm..
I'm in the same boat. But stock GB rom. Can't seem to relock the phone.
Just got back from VZW store and they are sending me a new Rez. They could not get the phone to do anything other than go into the bootloader. No Factory Reset, no recovery, just stock GB or bootloader.
SIGH...
I've tried the RUU flash to no avail either. It seems to start checking the PH98IMG.zip file and then goes back to bootloader menu.
Any Ideas?
Related
I'm trying to return my HTC One back to being unrooted because I wanna update it and almost everywhere I read, you need to unroot to get over the air updates. So I got S-Off and I relocked my bootloader, but whenever I try running the RUU, it always fails. I tried flashing it and I tried running the exe file. Why does it keep failing? Also, is it true you can't get OTA updates while being rooted? The RUU I use is for Cingular (which from my understanding is the one AT&T uses) and I have Super CID. Lastly, if anyone knows an easier way to return my phone to being completely stock and unrooted that would be great. Thanks in advance!
Which RUU did you use? Apparently the last official one was JB 4.3 w/ Sense 5.0, ver. 3.17.502.3. The one for KK4.4.2 w/ Sense 5.0, ver. 4.18.502.7 was apparently not actually released by ATT and many people were having problems with it.
clsA said:
Well near as I can tell the RUU did not originate from HTC, someone was able to create it and sign it same as HTC would. But the files behave differently than the "Real" HTC RUU. The only solution I found was to use the True HTC RUU from 3.xx.502.x and OTA to 4.xx.502.x to 5.xx.502.x. It requires s-off to flash the OTA's so it's not the perfect solution for everyone.
Click to expand...
Click to collapse
So if you tried with the KK4.4.2 RUU, download the JB4.3 RUU from http://www.htc1guru.com/. Since you're S-OFF, you can use either the .exe or the decrypted .zip. I used the decrypted .zip before and it worked fine. Once you get that flashed you can then take the OTAs to update to KK4.4.2 w/ Sense 6. You'll need to be on the AT&T network to get those OTA. Otherwise you'll need to manually flash the updates, as clsA states in his post that I quoted above.
As for not getting OTAs while being rooted....
It's not so much that being rooted prevents getting OTAs. It's the process of getting to root that modifies or deletes system files that need to be intact for the OTA to work. OTA need to be installed through stock recovery. If you're rooted, it's most likely that you have a custom recovery. Also, unlocking the bootloader deletes some files the OTA checks for. If those files not there, the OTA will not install.
Flashing an RUU is the easiest way to get completely stock. It resets the phone to an out-of-the-box state. Whereas a factory reset done from bootloader or recovery basically just wipes the data partition, which will remove any apps you installed and user data. But any modifications to the system partition that are done remain. You don't get back the files that are deleted when you unlocked the bootloader.
Also, since you are S-OFF, there's no need to relock your bootloader to run an RUU. That's only required if you're S-ON. And once you get S-OFF, there is no reason to go back to S-ON.
Since I just want to get the new OTA update, do you recommend I just flash the update as opposed to going back to stock recovery because I don't mind having a rooted phone? Also, my phones camera suddenly became blurry, is it possible that the rooting had something to do with it? If it did, would flashing the OTA update fix it or would I need to go back to stock recovery or would neither fix it? Sorry for so many questions.
First off, what version is currently on your phone? Depending on where you're currently at you may need to flash more than one update in order to get it to the latest version. And no matter what, you'll need to flash stock recovery in order for the updates to flash. OTA updates, whether taken OTA or flashed manually, require stock recovery, as I mentioned before. Also, again as I mentioned before, the process of rooting your phone (more specifically, the process of unlocking your bootloader) most likely deleted files from your system partition that need to be in place in order for the OTA updates to install. If they are not there, the update will fail. So to answer your question...No, I don't recommend "just flash the update as opposed to going back to stock recovery". It won't work.
Since you didn't answer my question and state which RUU you tried, I don't know if you tried a bad 4.4.2 RUU or if there are other issues with your device and/or computer that's preventing any RUU from installing. If you just don't want to flash the RUU, then you can try flashing the update in the phone's current state and when it fails, you can analyze the error report, try to track down stock versions of the files you're missing and restore them if you find them, then try the update again, hoping you found everything. That's a lot more of a hassle than just flashing the RUU, flashing the updates, rooting, and setting up your phone.
Another option is to just flash a custom ROM. Most of them will bring the phone up to the latest version. Some will even take it higher than what is officially available from AT&T.
As for your camera problem, can't see how just rooting would cause that, but maybe it did. Without knowing the cause of the issue, I can't say if just flashing the OTA would fix it. If it's a software issue, then possibly it would. If it's a hardware issue, then probably not. Focus on updating the phone and worry about the camera issue if it still persists once updated.
Sorry, I forgot about your question. First of all, I got it working using RUU Zip M7 UL JB43 SENSE50 MR Cingular US 3.17.502.3-decrypted. The one that didn't work for me is RUU Zip M7 UL JB 50 Cingular - 1.26.502.12. Second, I am running 4.4.2. Thats for anyone who comes across this and was wondering. Thanks for your help sharksfan7. Also, in case you were wondering, my camera is still blurry, but I'll start a different thread for that.
Howdy,
Been reading a lot about returning to stock and I'm still not 100% sure exactly how to manage it.
I have an international One Max on FW 3.23.401.1. Paid to S-Off with sunshine, installed TWRP and the first thing I did was do a nandroid backup of the stock firmware.
I've tried loads of ROMs but all of them have thier problems (weird clicking when notifications come in, camera crashes, no video HW acceleration etc.) So i've ended up back where I started and I'm quite happy with how HTC have skinned the phone.
As far as I can tell to get back to stock I need to flash stock recovery, re-lock the bootloader then install RUU.
There doesnt seem to be an RUU for my version?
Having a look around the other option seems to be:
Restore stock nandroid
Root
Flash stock bootloader
Do the SU re-lock bootloader commands?
But if i do this i end up with stock everything apart from the fact its rooted (and still S-Off). In this state would OTA updates etc. still work when lollipop appears? I thought modifying the stock fw with su binaries was enough to break OTA?
Is anybody able to help me nabigate back to out-of-the-box state or am I just going to have to update manually in the future (flashing new radio etc.)
Feel like im rambling now lol
Ed
FOUND THE RECOVERY (See below)
Right now my goal is to go back to stock to flash the OTA Update. I am running my nandroid back up I first made when which is the 4.4.4 w/ Software # 1.58.502.1. and right now I have TWRP as my recovery.
Also can someone confirm something for me. This nandroid I am running is rooted obviously and has SuperUser on it. If I go back to the stock recovery can I still do the OTA update even though SuperUser is there and the phone is unlocked?
Also in order to get the stock recovery back on the phone I need to use ABD and the windows command prompt method correct?
Thanks
found this link and was able to find the stock recovery finally. I clicked "Non-WWE- Recovery Images" Ten on the site it opens I clicked the more recoveries folder at the top and 1.58.502.1 was the first one.
http://forum.xda-developers.com/showthread.php?t=2701376
Now the only thing I need to know is if going back to stock recovery will allow me to update to OTA even though there is SuperUser on my device and even though I am rooted and unlock (S-on)
magicbumm328 said:
found this link and was able to find the stock recovery finally. I clicked "Non-WWE- Recovery Images" Ten on the site it opens I clicked the more recoveries folder at the top and 1.58.502.1 was the first one.
http://forum.xda-developers.com/showthread.php?t=2701376
Now the only thing I need to know is if going back to stock recovery will allow me to update to OTA even though there is SuperUser on my device and even though I am rooted and unlock (S-on)
Click to expand...
Click to collapse
As long as the ROM is stock (nothing modified by root) and stock recovery, you can update by OTA (root okay, unlocked bootloader okay).
Another option, just relock the bootloader and run the 4.4.4 RUU. It saves you from all the hassle (finding stock ROM and stock recovery), plus installing 2 OTAs. Only reason to do it the way you are, is to keep user data (RUU wipes phone) and it also saves you from having to relock.
redpoint73 said:
As long as the ROM is stock (nothing modified by root) and stock recovery, you can update by OTA (root okay, unlocked bootloader okay).
Another option, just relock the bootloader and run the 4.4.4 RUU. It saves you from all the hassle (finding stock ROM and stock recovery), plus installing 2 OTAs. Only reason to do it the way you are, is to keep user data (RUU wipes phone) and it also saves you from having to relock.
Click to expand...
Click to collapse
Well I do have the stock ROM. Idk if it having super user on it counts as being modified by root though? If not then its fine. And as mentioned I found the stock recovery as well.
The only reason I was looking to do it this way was because I do not really know what RUU is or how to do any of it. Idk how difficult it would be to relock the boot loader then figure out the RUU thing. Idk what the differences are between that and my phone being rooted as it is now are. I'll have to see if there is a thread that explains this RUU thing to me.
Thanks for the help and suggestion too btw
magicbumm328 said:
Well I do have the stock ROM. Idk if it having super user on it counts as being modified by root though? If not then its fine.
Click to expand...
Click to collapse
SuperUser is same as root, and is fine.
When I say "modifed by root" that often is when a user deletes "bloatware" they don't want, or adds apps, or modifies apps in the system partition.
If you didn't explicitly do any of those things, you should be fine. You will know this is the problem when you install the OTA, as the install will fail with the error message that the "system has been modified".
magicbumm328 said:
The only reason I was looking to do it this way was because I do not really know what RUU is or how to do any of it. Idk how difficult it would be to relock the boot loader then figure out the RUU thing. Idk what the differences are between that and my phone being rooted as it is now are. I'll have to see if there is a thread that explains this RUU thing to me.
Click to expand...
Click to collapse
RUU = ROM update utility
RUU is super easy, you don't really need much guidance to use it. LOCKED or RELOCKED bootloader is required to run it (UNLOCKED if okay if you have s-off). PC required, and the RUU will wipe the phone (so backup any personal data you want to keep, into your PC, cloud, etc.). Aside from those points, RUU is a self-explanatory executable (.exe) program that runs from your PC, and simple to use.
Relocking the bootloader is accomplished easily with a single fastboot command (after connecting phone to PC and booting into fastboot mode): fastboot oem lock
This is also assuming you did the bootloader unlock yourself, and therefore have fastboot/adb setup on your computer.
Running the RUU itself (after relocking the bootloader) is very easy. Boot into OS (some folks have better success being booted into fastboot mode, but I think the RUU is designed to run when booted into OS), connect to PC, then just run the RUU executable on your PC. The RUU executable will then just guide you what you need to do. Its mostly automated, you just need to confirm a few dialogue screens, etc. The RUU will reboot the phone a couple times, install the needed files automatically, and that's really it.
However, since you seem confidant you already have a stock ROM and corresponding stock recovery, I suppose the RUU doesn't gain you too much. But if you hadn't done those steps already, it often saves folks the hassle of tracking down the right stock ROM and recovery for their CID and current firmware. RUU in my opinion is a cleaner install, as it installs a complete stock image (not just updating piecemeal, like an OTA often does).
Also, since OTAs typically need to be installed in sequence, you will probably need to OTA to 2.23 software, than another OTA to 3.42 software. As RUU is a complete image, it would get you to 3.42 software in one fell swoop.
One other thing to note, is that if you are for some reason not connected to AT&T's network (using another carrier, another country, etc.) you will not get any OTAs on the AT&T branded device. AT&T oddity here, most other version will still OTA, even when not connected to a specific carrier. In contrast the AT&T RUU is able to be downloaded and run by anyone with an internet connection and PC (regardless of country, carrier, etc.). I'm under the assumption that most folks on this forum section are on AT&T's network, although I know that some are not (you haven't stated either way).
RUU links are included on my Index thread under heading "RUUs": http://forum.xda-developers.com/showthread.php?t=2751432
Aside from wiping the phone (OTA keeps user data, but you may end up wiping anyway if you run into bugs after OTA), the other downside to RUU is that you need to relock the bootloader. Then you need to unlock the bootloader again (via the HTCDev.com site, or alternately sunshine) if you want to install custom recovery, install custom ROMs, root, etc.
So the choice is really yours (RUU versus OTA). I'm just giving it as an alternative.
Hello all, I know this is an old phone so not many people care for it anymore, but I was trying to get mine back to stock so I can use it while the phone I am using now is out for repairs. I am having issues getting it back to stock though and these issues resulted in my phone becoming stuck in bootloader. I have relocked my phone and tried both flashing a PG86IMG.ZIP from bootloader and from fastboot, both of them fail. Is there maybe a step I am missing? Or possibly have I completely bricked my phone? Could it be that I need a more updated RUU? (they have been kinda hard to find, it seems that a lot of the mirrors have been taken down.)
Thank you in advance for your help.
Is there a fail message? Do you remember what version rom you had?
Can't remember what version rom I had. It has been a while since I have done anything with it.
You locked with custom rom, recovery, or kernel. Looks like stock was v2.95 or v2.89 problem is they never released a full PG86img.zip for 2.95
I've an update which might fix it or possible 2.89 zip might work. Will upload them when I can. But if you can unlock, then it might be possible to edit misc partition to allow you to install an older rom
Hey so here's my situation:
Installed the CM Nightly on my AT&T One M9, didn't like it, so I tried to revert to stock. I didn't want to pay $25 to S-OFF so I just tried installing various RUUs, but none would work. I read somewhere that I needed to relock my bootloader in order for the RUUs to work, so I did that, and now my phone just boots to Recovery Mode. I've tried installing AT&T RUU 2.6.502.16 (which didn't work because my phone is on a more recent firmware) and reinstalling 2.11.502.18/flashing its 0PJAIMG.zip (which didn't work because it's apparently broken). I've even tried installing T-Mobile's 2.11.531.19 RUU, which of course didn't work because my CID doesn't match and I can't change it because I'm S-ON.
I realize I went about this very badly almost from the start--no stock backup in TWRP, etc. This is my first Android phone so I've been learning this as I go and I was a bit sloppy.
I'm pretty sure I'm screwed, at least until a new update comes out or the current AT&T RUU is fixed, but I'm wondering if there's something else I can try. Any ideas? Thanks.
StageProps said:
Hey so here's my situation:
Installed the CM Nightly on my AT&T One M9, didn't like it, so I tried to revert to stock. I didn't want to pay $25 to S-OFF so I just tried installing various RUUs, but none would work. I read somewhere that I needed to relock my bootloader in order for the RUUs to work, so I did that, and now my phone just boots to Recovery Mode. I've tried installing AT&T RUU 2.6.502.16 (which didn't work because my phone is on a more recent firmware) and reinstalling 2.11.502.18/flashing its 0PJAIMG.zip (which didn't work because it's apparently broken). I've even tried installing T-Mobile's 2.11.531.19 RUU, which of course didn't work because my CID doesn't match and I can't change it because I'm S-ON.
I realize I went about this very badly almost from the start--no stock backup in TWRP, etc. This is my first Android phone so I've been learning this as I go and I was a bit sloppy.
I'm pretty sure I'm screwed, at least until a new update comes out or the current AT&T RUU is fixed, but I'm wondering if there's something else I can try. Any ideas? Thanks.
Click to expand...
Click to collapse
I do not have this phone... but...
I would go thru the bootloader unlock process again... reflash twrp...
And then probably flash the viper ROM... since it's modified stock