PLEASE HELP bricked galaxy tab! - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

OK so i tried to install a new rom besides honey comb and i tried to install cm10 on my galaxy tab 10.1 gt-p7500.
I've rooted all my phone and everything worked out but to my stupidity i didnt make a nandroid backup this time.
I downloaded the rom and gapps from here
http://forum.xda-developers.com/showthread.php?t=1787399&page=40
i successfully rooted my tab
i installed cwm
i installed unziped odin3 in the root folder
I did a kevlin wipe and system format, factory reset and cache wipe
I flashed the rom 3 secs through it says
assert failed: getprop ('ro.product.device") == get prop('ro.product.device") == "p4"
Error in /sdcard/cm10........
(Status 7)
installation aborted
so am i pretty much screwed? or is there a way to fix this?
(Note i could connect via usb so i used kies air or something like that... to transfer the files over wifi)!!!
ANY HELP IS GREATTTTTLYYYY APPRECIATED!

hassmaster said:
OK so i tried to install a new rom besides honey comb and i tried to install cm10 on my galaxy tab 10.1 gt-p7500.
I've rooted all my phone and everything worked out but to my stupidity i didnt make a nandroid backup this time.
I downloaded the rom and gapps from here
http://forum.xda-developers.com/showthread.php?t=1787399&page=40
i successfully rooted my tab
i installed cwm
i installed unziped odin3 in the root folder
I did a kevlin wipe and system format, factory reset and cache wipe
I flashed the rom 3 secs through it says
assert failed: getprop ('ro.product.device") == get prop('ro.product.device") == "p4"
Error in /sdcard/cm10........
(Status 7)
installation aborted
so am i pretty much screwed? or is there a way to fix this?
(Note i could connect via usb so i used kies air or something like that... to transfer the files over wifi)!!!
ANY HELP IS GREATTTTTLYYYY APPRECIATED!
Click to expand...
Click to collapse
Check out the OP on the thread for the AOSP version of jelly bean. http://forum.xda-developers.com/showthread.php?t=1765254
It says you need to update your recovery to a certain version. That is said to stop the assert 7 issue you are having.
Sent from my GT-P7510 using xda app-developers app

Hi,
I'm new to this forum and thisis my first post with a rather serious Problem:
I tried to flash my GalaxyTab P7500 as described here in post #80 using Mobile Odin. Problem is, the tab did not restart but has been stuck for an hour with the attached screen. It does not react to anything, not even the power button.
Any ideas what went wrong and what I could do?
Greets,
selcall
Edit: stupid me, didn't press power off long enough. Seems to work, although it should have rebooted by itself!

the first time I tried to install CM10 I've got the same same system error.
you have to use the cwm version 5.5.0.4
you can found it on DROID basement website.
edit:
link for cwm
http://droidbasement.com/db-blog/?p=2668
flash via Odin and the flashing of cm should work fine.
Sent from my GT-P7500 using XDA Premium HD app

marco.michel said:
the first time I tried to install CM10 I've got the same same system error.
you have to use the cwm version 5.5.0.4
you can found it on DROID basement website.
edit:
link for cwm
http://droidbasement.com/db-blog/?p=2668
flash via Odin and the flashing of cm should work fine.
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Is 5.5.0.4 REQUIRED for CM10 to flash properly? Or will any version over and above but inclusive of 5.5.0.4 work? (I'm on 5.8.3.1 for example, flashed via Rom Manager...)

Related

Error while installing custom ROM

E:Short write of /tmp/sideload/package.zip (No space left on device)
The phone is rooted as I've searched on google and what little I could find says to have it rooted. Not exactly sure what to try. I've wiped and reset everything and still a no go. Doesn't matter which ROM is selected either. Thank you.
TommyStarwind said:
E:Short write of /tmp/sideload/package.zip (No space left on device)
The phone is rooted as I've searched on google and what little I could find says to have it rooted. Not exactly sure what to try. I've wiped and reset everything and still a no go. Doesn't matter which ROM is selected either. Thank you.
Click to expand...
Click to collapse
My best advice is to unroot and do a complete factory reset and try to root again
Go to rootgalaxynote.com and click the upper right tab to unroot
Sent from my SAMSUNG-SGH-I717 using xda premium
Jt004 said:
My best advice is to unroot and do a complete factory reset and try to root again
Go to rootgalaxynote.com and click the upper right tab to unroot
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Just rooted it and checked it with super user downloaded ROM manager set it to Recovery mode from there and still the same error.
You should still try to unroot even if you just rooted. It fixes many problems
Sent from my SAMSUNG-SGH-I717 using xda premium
Do you have Clockwork recovery installed on your phone? How are you trying to install these custom ROMs? Are you using ROM Manager?
You don't need root to flash a Rom...
Get Odin
Get an Odin flashable version of cwm
Flash said recovery with Odin
Boot into recovery by holding all the buttons till you feel a vibrant and letting off the power button, or the adb command: adb reboot recovery (or since you have root, download a terminal emulator from the market enter the command: reboot recovery, then Grant superuser permission.)
Then Flash Rom in cwm...
Old version of TWRP maybe?
To run the ROM Manager I needed root access. I tried to load the ROM from the ROM Manager and also straight from manual recovery mode.
flappjaxxx said:
Old version of TWRP maybe?
Click to expand...
Click to collapse
Trying to install yours and i get
E:signature verification failed
That is stock recovery 3e...
Go read my post above...
THIS IS A LINK TO CWM TOUCH...JUST CLICK ANYWHERE HERE AND GET THE ODIN FLASHABLE VERSION
You do not need root to flash a Rom... Rom manager is not needed, and in fact just causes more problems than is worth
I don't think ROMmanager is even capable of flashing anything on the note. Someone correct me if I am wrong
You're correct...i wish that app would just go away and be erased from people's memories.
Actually i don't think Rom manager has worked on any Samsung device since eclair...as froyo was when they introduced 3e recovery, which requires signed update.zips, which only Samsung has the signature tool for.
So the update.zip Rom manager downloads to flash cwm with just gets stuck at "E: signature verification failed"
I'm still getting errors I'm going to search on youtube some more and see what could possibly be an issue. I go in with Up+home+power and erase everything I can in there and try to load from .zip and errors.
So I got it to work. I didn't really do anything differently except put it on my external SD card instead of my internal.

Can't Flash CM9

I flashed back to stock AT&T, rooted, added Superuser, installed CWM, downloaded the CM9 stable zip from their site, put it on SD (tried internal and external, not that it should make any difference...), and keep getting this:
Installing: /sdcard/cm-9.0.0-quincyatt.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "SGH-I717" || getprop("ro.build.product") == "SGH-I717" || getprop("ro.product.device") == "quincyatt" || getprop("ro.build.product") == "quincyatt"
E:Error in /sdcard/cm-9.0.0-quincyatt.zip
(Status 7)
Installation aborted.
Was it a bad download, perhaps? Seems unlikely, but you never know I suppose.... The only thing I can come up with is that I'm on kernel 2.whatever and the screenshots I see with 4.0+ have 3.0.8. If this is the problem, how can I get that kernel on my Note before flashing CM9 again?
Please let me know if I'm missing any other important information needed to help solve this awful stock phone problem
You need to update ROM manager.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
kinghorsey said:
You need to update ROM manager.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
No, he needs to update his recovery which can be done via ROM manager if he wants to keep cwm. Twrp 2.2.1.1 also works.
CWM 5.8.4.8 is what ROM manager should install for you. If you give them money ROM manager can install the touch CWM 5.8.4.3. All of these versions work to flash cm9, cm10, or any other ROM.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
yollasho said:
No, he needs to update his recovery which can be done via ROM manager if he wants to keep cwm. Twrp 2.2.1.1 also works.
CWM 5.8.4.8 is what ROM manager should install for you. If you give them money ROM manager can install the touch CWM 5.8.4.3. All of these versions work to flash cm9, cm10, or any other ROM.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I just got 5.5.0.4 which I assumed was the latest, and when I installed it again through ROM manager it gave me 5.0.2.7. Odd.
I'll look for 5.8 and update...
gauchotodd said:
I just got 5.5.0.4 which I assumed was the latest, and when I installed it again through ROM manager it gave me 5.0.2.7. Odd.
I'll look for 5.8 and update...
Click to expand...
Click to collapse
For the life of me I can't get CWM to update. I got 5.8.4.8 from their site, which is just a recovery img, put it on the SD card as is, didn't do anything, made it a zip to try to run it as update.zip, won't do it. I deleted the existing CWM folders, put the new one on there, and it still loads 5.5.0.4. Tried formatting everything, didn't work. ROM manager won't do anything for me either.
gauchotodd said:
For the life of me I can't get CWM to update. I got 5.8.4.8 from their site, which is just a recovery img, put it on the SD card as is, didn't do anything, made it a zip to try to run it as update.zip, won't do it. I deleted the existing CWM folders, put the new one on there, and it still loads 5.5.0.4. Tried formatting everything, didn't work. ROM manager won't do anything for me either.
Click to expand...
Click to collapse
Yeah if you're going to use the .img you have to use adb. The instructions are around.
ROM manager has the option at the top to "flash ClockworkMod recovery" that should install the latest non touch CWM. Did you try that?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
yollasho said:
No, he needs to update his recovery which can be done via ROM manager if he wants to keep cwm. Twrp 2.2.1.1 also works.
CWM 5.8.4.8 is what ROM manager should install for you. If you give them money ROM manager can install the touch CWM 5.8.4.3. All of these versions work to flash cm9, cm10, or any other ROM.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
That's what I meant.
Accidentally omitted "via."
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
yollasho said:
Yeah if you're going to use the .img you have to use adb. The instructions are around.
ROM manager has the option at the top to "flash ClockworkMod recovery" that should install the latest non touch CWM. Did you try that?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I got an error in the command prompt when I tried adb, and I tried to Flash ClockworkMod Recovery in ROM manager but it installed 5.0 (wtf); since I can't get CWM to update to 5.8 I gave up and reflashed to stock, rerooted, reinstalled Superuser, put the TWRP 2.2.1.1 zip on my SD (openrecovery-twrp-2.2.1.1-sgh-i717-signed.zip), but when I try to install it gets a quarter of the way through and I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
install_package = (2)
Installation aborted.
So I got GooManager from the market, and when I try to Install OpenRecoveryScript I get "No recoveries were found for your device."
I just can't catch a break here. What am I missing??
gauchotodd said:
I got an error in the command prompt when I tried adb, and I tried to Flash ClockworkMod Recovery in ROM manager but it installed 5.0 (wtf); since I can't get CWM to update to 5.8 I gave up and reflashed to stock, rerooted, reinstalled Superuser, put the TWRP 2.2.1.1 zip on my SD (openrecovery-twrp-2.2.1.1-sgh-i717-signed.zip), but when I try to install it gets a quarter of the way through and I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
install_package = (2)
Installation aborted.
So I got GooManager from the market, and when I try to Install OpenRecoveryScript I get "No recoveries were found for your device."
I just can't catch a break here. What am I missing??
Click to expand...
Click to collapse
you got this installation aborted error in cwm when flashing twrp?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
yollasho said:
you got this installation aborted error in cwm when flashing twrp?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Sorry no, I reflashed to stock because it was the only way I could get rid of CWM completely. So that was in the stock recovery mode while trying to flash TWRP.
gauchotodd said:
Sorry no, I reflashed to stock because it was the only way I could get rid of CWM completely. So that was in the stock recovery mode while trying to flash TWRP.
Click to expand...
Click to collapse
Haha, ok. So you are Odin'd back to stock and stock recovery. I would use Odin to install the cwm from braways thread in dev section. Then you will have cwm and can flash stuff (like twrp). Once you flash latest twrp you will be set to flash any Rom. Hope that helps.
You can't flash this stuff from stock 3e recovery.
Good luck.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
yollasho said:
Haha, ok. So you are Odin'd back to stock and stock recovery. I would use Odin to install the cwm from braways thread in dev section. Then you will have cwm and can flash stuff (like twrp). Once you flash latest twrp you will be set to flash any Rom. Hope that helps.
You can't flash this stuff from stock 3e recovery.
Good luck.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
That's exactly what I used last time, the download for CWM there gave me 5.5 which caused the rest of my (initial) problems. After reflashing stock, I tried to put 5.8 on the SD and install the zip, and it wouldn't do that either. I'll give that another shot since TWRP isn't working either....
Finally got it: had to reinstall CWM 5.5 so I could install TWRP 2.2.1.1 and then it let me flash CM9. I swear I tried that already; I guess it just needed to be rubbed the right way. Thanks for the help!
gauchotodd said:
Finally got it: had to reinstall CWM 5.5 so I could install TWRP 2.2.1.1 and then it let me flash CM9. I swear I tried that already; I guess it just needed to be rubbed the right way. Thanks for the help!
Click to expand...
Click to collapse
Glad you got it figured out. You should be set now.
Sorry I wasn't more helpful, I was afk a bit.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

HELP please!!! S2 Stuck on boot screen

Guys I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits. I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen. So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard. It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package. Thank you. Looking forward to an earlier response
1) This isn't urgent. We get people 'crying wolf' on here all the time. Having a thread title like this is a good way to have people ignore your thread.
2) Also, using a title like [URGENT] HELP please !!! is another good way to have people ignore your thread. If you want help, you need to use a descriptive thread title
3) Unless you use sentencing/paragraphing, your OP is impossible to read. I certainly didn't read past the first line & many other people here won't unless you fix it.
MistahBungle said:
1) This isn't urgent. We get people 'crying wolf' on here all the time. Having a thread title like this is a good way to have people ignore your thread.
2) Also, using a title like [URGENT] HELP please !!! is another good way to have people ignore your thread. If you want help, you need to use a descriptive thread title
3) Unless you use sentencing/paragraphing, your OP is impossible to read. I certainly didn't read past the first line & many other people here won't unless you fix it.
Click to expand...
Click to collapse
I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits.
I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen.
So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard.
It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package
can u help me now please?? anything i can do with odin?? Thank you.
machokingjim said:
I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits.
I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen.
So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard.
It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package
can u help me now please?? anything i can do with odin?? Thank you.
Click to expand...
Click to collapse
Can u enter download mode/recovery? Do a factory reset,and see if you can boot.
GamingDj said:
Can u enter download mode/recovery? Do a factory reset,and see if you can boot.
Click to expand...
Click to collapse
I can enter recovery mode. I tried it but of no use. Wat else can i do??
I also tried flashing paranoid rom but it returned signature verification failed.
machokingjim said:
I can enter recovery mode. I tried it but of no use. Wat else can i do??
I also tried flashing paranoid rom but it returned signature verification failed.
Click to expand...
Click to collapse
Flash Siyah Kernel via Odin
GamingDj said:
Flash Siyah Kernel via Odin
Click to expand...
Click to collapse
In recovery mode odin does not detect my phone but in boot screen, where the phone is stuck, it detects. So the flashing process failed stating couldnt open COM port.
What should i do to make my phone get detected in the recovery mode via odin? I had installed clock work mod recovery manually.
Thank you vry much.
Search for Hopper8's thread Troubleshoot a failed odin flash
GamingDj said:
Search for Hopper8's thread Troubleshoot a failed odin flash
Click to expand...
Click to collapse
Thank you finally got my phone back... Thank u vry much

[Q] failed to install CM

Hello
i tried to install CM but failed to do so
my phone is i9100g running JB 4.1.2
i got this error mssg
assert failed:getprop("ro.product.device")=="i9100g" getprop
error in /sdcard/cm (status 7)
i am already rooted and running CWM recovery and i used the below link to root and to install CWM
http://forum.xda-developers.com/showthread.php?t=2065581
i tried CM 10.1.2 and 10.1.3 and i got the same error in both
Can u help plz
Thanks
Update recovery and retry
--------------
alliances+siyah
andrewwright said:
Update recovery and retry
--------------
alliances+siyah
Click to expand...
Click to collapse
hi, I have the same problem and follow same steps but how can I update recovery?
Thanks
Cordova62 said:
hi, I have the same problem and follow same steps but how can I update recovery?
Thanks
Click to expand...
Click to collapse
Flash the latest cm10.2 and that will give you the latest recovery. Then once that's boooted and working and after a trusty nandroid flash cm11
Sent from my GT-I9300 using xda app-developers app
bebo911 said:
Hello
i tried to install CM but failed to do so
my phone is i9100g running JB 4.1.2
i got this error mssg
assert failed:getprop("ro.product.device")=="i9100g" getprop
error in /sdcard/cm (status 7)
i am already rooted and running CWM recovery and i used the below link to root and to install CWM
http://forum.xda-developers.com/showthread.php?t=2065581
i tried CM 10.1.2 and 10.1.3 and i got the same error in both
Can u help plz
Thanks
Click to expand...
Click to collapse
It's easy to fix this.
Open Rom.zip by Winzip or 7zip.
Find system/build.drop
Extract it and open by Notepad++
Delete getprop..... (maybe it have 2-3 lines)
Save and put new build.drop to you Rom.zip by Winzip.
Good luck
A newer recovery like CWM 6.0.4.5 is required.
You can either flash the recovery directly or a kernel/rom which has the newer version of cwm.

[Q] Problem in installing pa_gapps - cm11 S3 gti9300

I installed cm11 nightly update 613. Install was successful and phone is working fine. I am encountering the following error on trying to install gapps by using install zip option we get on pressing volume up+power+home buttons:
file_getprop: failed to stat "/system/build.prop": No such file or directory
E: Error in /storage/sdcard1/pa_gapps-full-4.3-20131102-signed.zip
(Status 7)
Installation aborted
I tried installing gapps 4.4 modular full instead of 4.3 but got the same error.
I noticed one particular error, whenever I try wipe data/factory reset, everything is fine except this one thing:
Error in mounting /data!
Dont know if this is causing the trouble. I also tried usind a different sdcard(written in some thread) in case there was some problem with the current one, but same errors arise.
I am new to all of this. This is the first time I rooted my phone and installed a custom ROM so please provide a solution in simpler terms, thanks.
Phone details:
Samsung galaxy S3 gt i9300
cm-11-20140613-NIGHTLY-i9300
ClockworkMod recovery v6.0.4.5
are you using latest CWM? Im not sure 6.0.4.5 is latest ir not. please check
Sent from my GT-I9300 using Tapatalk
RibozoM said:
are you using latest CWM? Im not sure 6.0.4.5 is latest ir not. please check
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Would that make any difference? Latest is 6.0.4.7, I am using 6.0.4.6. Most of the tutorials to install kitkat on s3 use cwm6.0.4.6
6.0.4.7 doesnt have tar for odin I guess, so 6.0.4.6 would be the latest stable cwm.
fourEC said:
Would that make any difference? Latest is 6.0.4.7, I am using 6.0.4.6. Most of the tutorials to install kitkat on s3 use cwm6.0.4.6
6.0.4.7 doesnt have tar for odin I guess, so 6.0.4.6 would be the latest stable cwm.
Click to expand...
Click to collapse
Status 7 errors are usually due to using an incompatible recovery so yes using an older CWM may be the problem, out of interest have you tried flashing cm gapps ?
Sent from my GT-I9300

Categories

Resources