So my com.andoird.phone has been crashing constantly which means I can't even do anything without the stupid popup coming up. I believe it's due to a faulty application. Anybody had any luck on fixing this? (running CM10 test build on my Evo 4g LTE)
Secondary question. Is it possible to remove the app from fastboot USB or recovery? If that were possible I think the system would sort itself back out. Thanks in advance
First, which build are you running? There have been like an average of 3 builds a day since Sunday.
Second, they have seen progressive improvements on each build.
I suggest getting the latest build from IRC if what you are running is a day or so old.
Also there are a lot of great people in there to help if you stick around.
sent from my LTEvo
elitelimfish said:
So my com.andoird.phone has been crashing constantly which means I can't even do anything without the stupid popup coming up. I believe it's due to a faulty application. Anybody had any luck on fixing this? (running CM10 test build on my Evo 4g LTE)
Secondary question. Is it possible to remove the app from fastboot USB or recovery? If that were possible I think the system would sort itself back out. Thanks in advance
Click to expand...
Click to collapse
Did you get this sorted out? I had the same problem of speradic fcing on that from the latest buil at 8pm last night. I wiped everything and reinstalled. It fc'd continuously until I got through the setup with my turbo fingers.
Everyone will tell you the same thing. The builds are on IRC and so are the bugs. Deck has not made a fix for this bug. It is a known issue. Get on IRC and off XDA for these builds.
AsinX said:
Everyone will tell you the same thing. The builds are on IRC and so are the bugs. Deck has not made a fix for this bug. It is a known issue. Get on IRC and off XDA for these builds.
Click to expand...
Click to collapse
I can talk wherever I please thank you...get off xda and go back to irc
Sent from my EVO using Tapatalk 2
ditto
I had a variation on this same issue. Did a TB of my user apps and system settings (not system apps) from my flex 1.75 install. Full wipe, installed the latest 8/2 CM10 from IRC, phone started fine, got one com.phone crash dialog and then everything seemed to be fine. Did the TB restore and when I rebooted I was stuck in an endless com.phone and android.process.acore crash loop. Only clue I have is that I noticed my wifi was connected when I rebooted (since my settings were restored).
Flashed to venom :-/
I'm on latest radios/firmware, s-off etc, latest TWRP, matching md5s etc
ristrettodreams said:
I had a variation on this same issue. Did a TB of my user apps and system settings (not system apps) from my flex 1.75 install. Full wipe, installed the latest 8/2 CM10 from IRC, phone started fine, got one com.phone crash dialog and then everything seemed to be fine. Did the TB restore and when I rebooted I was stuck in an endless com.phone and android.process.acore crash loop. Only clue I have is that I noticed my wifi was connected when I rebooted (since my settings were restored).
Flashed to venom :-/
I'm on latest radios/firmware, s-off etc, latest TWRP, matching md5s etc
Click to expand...
Click to collapse
Yeah i didn't have the issue except on reboot until I rebooted this morning then it went psycho. Its a pretty solid build otherwise.
Sent from my EVO using Tapatalk 2
ristrettodreams said:
I had a variation on this same issue. Did a TB of my user apps and system settings (not system apps) from my flex 1.75 install. Full wipe, installed the latest 8/2 CM10 from IRC, phone started fine, got one com.phone crash dialog and then everything seemed to be fine. Did the TB restore and when I rebooted I was stuck in an endless com.phone and android.process.acore crash loop. Only clue I have is that I noticed my wifi was connected when I rebooted (since my settings were restored).
Flashed to venom :-/
I'm on latest radios/firmware, s-off etc, latest TWRP, matching md5s etc
Click to expand...
Click to collapse
Pretty sure restoring system settings fro sense to aosp is a bad idea. It made it so you could not connect to data and that's why you had the error loop. just saying
sent from my LTEvo
Yep, user error
Rxpert said:
Yep, user error
Click to expand...
Click to collapse
I retried full wiping/flashing just restoring user apps, and while it didn't immediately go into the loop the same way, it still did it if my wifi was on and associated when I rebooted. It's apparently something to do with not getting data making the process go nuts.
ristrettodreams said:
I retried full wiping/flashing just restoring user apps, and while it didn't immediately go into the loop the same way, it still did it if my wifi was on and associated when I rebooted. It's apparently something to do with not getting data making the process go nuts.
Click to expand...
Click to collapse
Are you having the problem before restoring user apps? Sometimes I have found it best to re-install via market using appbak. Then once the apps are re-installed that way, just restore only the app data you need from TB, don't restore all apps/data at once.
Related
I was running a stock ROM, rooted, with the original radios. All was operating properly.
Flashed the leaked radio update. Everything still okay.
Flashed Das BAMF 1.6. It boots up fine (and looks gorgeous, btw), but my SIM card is not recognized at all. Symptoms:
When making a call, I see text in the upper-right corner saying: "SIM Card not found. Please \n the phone."
Settings > Call > Voicemail Service... tapping on this dropdown results in "Voicemail number change unsuccessful. Please contact your carrier if this..."
I tried turning the phone off, booting it once without the SIM card, then rebooting with it back in place. That didn't help.
Out of frustration, I restored my tbolt to the backup I made before attempting das BAMF. Magically, my SIM card is recognized and everything back to normal. ...I tried das bamf one more time, only to have the same crappy results... FYI, I was sure to wipe data/cache/dalvik before flashing the rom in recovery.
HELP!
EDIT: I've also just noticed that despite this being das bamf 1.6 remix, I don't see the 4-in-1 restart menu, nor a 6-bar signal indicator. I'm absolutely positive that I downloaded 1.6 remix... Am I in the twilight zone?
did you wipe data before installing the ROM?
nevermind i missed it. i dont know then sorry.
try redownloading and check md5
I verified the md5 before flashing.
i actually received the same errors but it did not impede functions of the phone. My data has been dropping, but that is not because of the ROM, it has been doing it since the 4G outage.
EDIT: Actuallly my voicemail says:
"We have a problem
Your voicemail settings could not be loaded. Please try again."
Never seen that before.
The more I look into it, I'm missing things that are pictured in the 1.6 Remix screenshots... all of this has me very confused. I'm going back to the stock ROM until someone else finds and resolves the SIM card issue.
I am experiencing the same issues here. I see 'no Sim Card Detected' at the top, I have none of the Reboot Options, no 6 bar signal, etc.
Seems to be kind of a big issue and yet noone has really offered solutions. I have done the full wipe aswell.
Thank you for everyone's time involved with making such a Great ROM....Plus this Community of Users is awesome...Take that IPhone!
Did you happen to download 1.6.1 or 1.6.2 and install just those first? Those two are just patches that required 1.6 as a base.
So, you would have to flash 1.6, then 1.6.1 or 1.6.2 over it as a patch - you can't just flash 1.6.1 or 1.6.2 by themselves. With 1.6.3, I think they went back to a full rom release.
Install via cwr, not Rom manager.
Sent from my ADR6400L using XDA App
I had the same problem with the SD card running Bamf Remix. What solved it for me was formatting the SD card. Obviously backup the SD card on your computer first.
Download 1.6.3 and do a flash. It's a complete download too, id give that a go. I didn't run into any of those problems. Are you flashing through rom manager or cwm?
Sent from my ADR6400L using XDA App
Dont manually mount data. For some reason when i did that the same exact this happened to me. No 6 bar signal and no 4 in 1 reboot menu.
Sent from my ADR6400L using XDA App
Thanks for all the suggestions, everyone. I solved the problem by using recovery rather than ROM Manager, and wiping data/dalvik/cache twice each (doing them only once wasn't sufficient, although idk how to explain it). I've been running 1.6.2 without issues for a day now. I'll move on to 1.6.3 after I see how well it's holding up for everyone else.
I ended up wiping everything and installing 1.6.3 and that fixed everything. Thank You all Gentlemen for helping!
You guys are genius!
Well I thought the issues was over after the install, But now Every time i receive a call ...Call Recorder Crashes. Also I am experiencing random reboots.
I was in the middle of a call and it rebooted on me.
Any Ideas?
Kodiax said:
Well I thought the issues was over after the install, But now Every time i receive a call ...Call Recorder Crashes. Also I am experiencing random reboots.
I was in the middle of a call and it rebooted on me.
Any Ideas?
Click to expand...
Click to collapse
For the Call Recorder, it sounds like you're running a custom kernel. Most kernels don't support the things that Call Recorder needs. For the reboots, well, can't help you there.
mcore09 said:
Thanks for all the suggestions, everyone. I solved the problem by using recovery rather than ROM Manager, and wiping data/dalvik/cache twice each (doing them only once wasn't sufficient, although idk how to explain it). I've been running 1.6.2 without issues for a day now. I'll move on to 1.6.3 after I see how well it's holding up for everyone else.
Click to expand...
Click to collapse
Other than wiping twice (???), what you said you did should be standard procedure. Flashing via ROM Manager and Kernel Manager are no-no's unless you get lucky. In an ideal world, they work. And in many cases, they do work. However, in many cases, they cause nasty issues. For example, if you flash some kernels via Kernel Manager, the device drivers don't get flashed properly and you have some pretty nasty problems. And when you flash via ROM Manager, well, you learned what happens. From now on, only flash via CWM and CWM only.
Thank you for your responses. I am only using the 4.4.7 kernel. Which come s with dad band 1.6.3. I think that it is this new kernel (4.4.7). I never had these issues with 1.6.2.
Sent from my ADR6400L using XDA Premium App
Try down grading your kernel to a slightly older version.
Sent from my ADR6400L using XDA App
I reflashed my kernel to the same 4.4.7 but downloaded the kernel from his standalone post regarding kernels. My call rcorder is working now. Hasn't restarted since then either. Crossing my fingers ...
Sent from my ADR6400L using XDA Premium App
Well it restarted randomly while I had it connected to my Laptop and set to charge. I was in the middle of a Call with someone.
Very interesting why its Randomly rebooting. Could be the new radio. May be that why verizon held out on releasing it yet.
PLEASE HELP!!
I installed the Alpha-X ICS ROM for Evo 3D. The problem that I'm facing is that it keeps re-booting to "No Service" state.
I've already tried toggling the "Airplane" mode method - the moment I turn Airplane mode off, the status bar shows that I'm connected to Sprint but within a second starts rebooting (showing the ICS start up screen animation) and goes in a loop for 5-6 times and then ends up back with "No Service" state.
Please help as I really like this ROM. I am a newbie here, hence XDA doesn't allow me to post directly to the Alpha-X thread.
[email protected] said:
PLEASE HELP!!
I installed the Alpha-X ICS ROM for Evo 3D. The problem that I'm facing is that it keeps re-booting to "No Service" state.
I've already tried toggling the "Airplane" mode method - the moment I turn Airplane mode off, the status bar shows that I'm connected to Sprint but within a second starts rebooting (showing the ICS start up screen animation) and goes in a loop for 5-6 times and then ends up back with "No Service" state.
Please help as I really like this ROM. I am a newbie here, hence XDA doesn't allow me to post directly to the Alpha-X thread.
Click to expand...
Click to collapse
Hello,
How did you flash this ROM? Are you on HBoot 1.5?
If so, you will need to re-flash this ROM using Fastboot (PM Me if you cant find the instructions)
Yes, I'm on HBoot 1.5 and flashed it using Flash GUI.
I was earlier using ClearROM.
Update: I guess, i realized the problem - during the first time I had flashed this ROM, I had cleared all data & cache 9basically factory reset). It had worked fine.
Once in, I used Titanium backup to restore all my app data (including system data)... I guess that system data is causing this issue. I re-did the entire process (factory reset & flash) and now it's working fine.
I'll go ahead and try restoring only user app this time and update back.
This just proves my "Noob"ness, I guess
[email protected] said:
Update: I guess, i realized the problem - during the first time I had flashed this ROM, I had cleared all data & cache 9basically factory reset). It had worked fine.
Once in, I used Titanium backup to restore all my app data (including system data)... I guess that system data is causing this issue. I re-did the entire process (factory reset & flash) and now it's working fine.
I'll go ahead and try restoring only user app this time and update back.
This just proves my "Noob"ness, I guess
Click to expand...
Click to collapse
I just wrote a post about this lol. Yes, it is only the system spp/data that will cause the issues. You shouldn't have problems restoring all of your user apps and data. I am running ALPHA X with all of my apps and data restored through TB with zero problems.
Bamba1260 said:
I just wrote a post about this lol. Yes, it is only the system spp/data that will cause the issues. You shouldn't have problems restoring all of your user apps and data. I am running ALPHA X with all of my apps and data restored through TB with zero problems.
Click to expand...
Click to collapse
im going to try this to solve my problems i have been having with my phone... you will be getting lots of thanks if it works lol
[email protected] said:
Update: I guess, i realized the problem - during the first time I had flashed this ROM, I had cleared all data & cache 9basically factory reset). It had worked fine.
Once in, I used Titanium backup to restore all my app data (including system data)... I guess that system data is causing this issue. I re-did the entire process (factory reset & flash) and now it's working fine.
I'll go ahead and try restoring only user app this time and update back.
This just proves my "Noob"ness, I guess
Click to expand...
Click to collapse
LOL....restoring system data can cause all sorts of hell for you as Bamba1260's already pointed out and you've already figured out the hard way, and there's nothing wrong with being a "noob" either, but keep in mind if you're looking for a stable and fully functioning phone or prone to freaking out when something goes wrong.....this is after all an ALPHA (experimental / for testing and bug reporting purposes only) rom. Indeed it is a very good alpha state rom, but things are likely to and should be expected to go wrong with it periodically.
hockeyfamily737 said:
LOL....restoring system data can cause all sorts of hell for you as Bamba1260's already pointed out and you've already figured out the hard way, and there's nothing wrong with being a "noob" either, but keep in mind if you're looking for a stable and fully functioning phone or prone to freaking out when something goes wrong.....this is after all an ALPHA (experimental / for testing and bug reporting purposes only) rom. Indeed it is a very good alpha state rom, but things are likely to and should be expected to go wrong with it periodically.
Click to expand...
Click to collapse
Yeah.. that's one more thing I did realize.. but was so enamored by the ICS ROM that I wanted to "taste" it one way or other..
Anyway, since I'm not done with my first 10 posts, I will have to post this bug(?) here for everybody's FYI that the GPS doesn't seem to work with this ROM.
So, know before you jump...
P.S. I still love this ROM - one of the smoothest that I've tried.
The gist of my problem: Earlier today I successfully installed the latest CM9 from Joker (.0.7.0.0). Unfortunately, all wireless services other than WIFI were down (including SMS and telephone), and on start the phone produced an error about the com.android.phone force closing (or some such). I figured I had screwed something up, so I reflashed the clean stock firmware.
Since then (roughly 12 hours ago), I've been getting the stuck on the boot screen whenever I try flashing CM9. Relevant details follow:
Logcat doesn't help -- it tosses an error about the shell directory or file not being found (the exact error message escapes me, but I can reproduce it if need be).
I've tried formatting cache, data, and system, followed by a wipe (or two) on several occasions.
I've also tried flashing various versions of CM9 -- specifically .0.7.0.0 and .3.1. Both give the same result. I've also tried whatever version is in the KitchenSink v2.11 installer. Same result.
My CMW version is the 5.0.2.8. I installed it through RomManager (as opposed to the command prompt on Windows, which I did the first time when it quasi-worked). I've read that using v2 fixes this issue, but I can't find a live copy anywhere, so I haven't been able to try it.
Rather than going for a completely new install every time I bork something, I made a backup just after I finished unlocking and rooting the phone. I just restore that backup after each attempt, and it goes back to working fine on the stock Android firmware (3.whatever).
Any ideas? I think I'll try starting completely from scratch again and not using RomManager tomorrow, but if anyone can point out my error before then and save me a lot of -- hopefully not wasted -- effort, it would be fantastic.
Cheers,
Vash
vash265 said:
The gist of my problem: Earlier today I successfully installed the latest CM9 from Joker (.0.7.0.0). Unfortunately, all wireless services other than WIFI were down (including SMS and telephone), and on start the phone produced an error about the com.android.phone force closing (or some such). I figured I had screwed something up, so I reflashed the clean stock firmware.
Since then (roughly 12 hours ago), I've been getting the stuck on the boot screen whenever I try flashing CM9. Relevant details follow:
Logcat doesn't help -- it tosses an error about the shell directory or file not being found (the exact error message escapes me, but I can reproduce it if need be).
I've tried formatting cache, data, and system, followed by a wipe (or two) on several occasions.
I've also tried flashing various versions of CM9 -- specifically .0.7.0.0 and .3.1. Both give the same result. I've also tried whatever version is in the KitchenSink v2.11 installer. Same result.
My CMW version is the 5.0.2.8. I installed it through RomManager (as opposed to the command prompt on Windows, which I did the first time when it quasi-worked). I've read that using v2 fixes this issue, but I can't find a live copy anywhere, so I haven't been able to try it.
Rather than going for a completely new install every time I bork something, I made a backup just after I finished unlocking and rooting the phone. I just restore that backup after each attempt, and it goes back to working fine on the stock Android firmware (3.whatever).
Any ideas? I think I'll try starting completely from scratch again and not using RomManager tomorrow, but if anyone can point out my error before then and save me a lot of -- hopefully not wasted -- effort, it would be fantastic.
Cheers,
Vash
Click to expand...
Click to collapse
Use this recovery. http://forum.xda-developers.com/showthread.php?t=1218417
Or jokers at http://forum.jokersax.com/discussion/25/joker-recovery-for-the-photon-v3
I use the first link. Works perfect. Once you install the recovery. Wipe everything. Install 0.3.1. Boot into the system. Go back and flash the newest 0.7.0 update with gapps.
Should fix all the issues.
Sent from my SGH-I777 using XDA
Well, I got .3.1 working. Then tried to install .7 and it crapped itself again. Should I have cleared all the data/caches/etc. between the two?
Edit - I tried it again but this time cleared all the data between installs. It booted, but I got the same 'android.phone failed to start' message.
Edit 2 - Alright, I think I got it. I didn't clear anything between the two installs, but I installed each firmware twice without exiting recovery mode either time. It seems to be working (phone works, at least), although I'm not sure my 3G is working...
na7q said:
Use this recovery. http://forum.xda-developers.com/showthread.php?t=1218417
Or jokers at http://forum.jokersax.com/discussion/25/joker-recovery-for-the-photon-v3
I use the first link. Works perfect. Once you install the recovery. Wipe everything. Install 0.3.1. Boot into the system. Go back and flash the newest 0.7.0 update with gapps.
Should fix all the issues.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Joker's recovery is a zip file you can flash from 5.0.2.8 if you don't feel like hooking up to the computer and using fastboot. But 5.0.2.8 doesn't work right to flash roms.
Sent from my MB855 using xda app-developers app
Aside from not being able to connect to any 3G networks (which is a problem...), it looks like it's working. Any ideas why 3G doesn't work now?
Thanks for the help thus far =)
vash265 said:
Aside from not being able to connect to any 3G networks (which is a problem...), it looks like it's working. Any ideas why 3G doesn't work now?
Thanks for the help thus far =)
Click to expand...
Click to collapse
Install 3.1, boot, reboot to recovery, wipe cache and dalvik, install 7.0, install gapps, boot.
Sent from my MB855 using xda app-developers app
Acvice said:
Install 3.1, boot, reboot to recovery, wipe cache and dalvik, install 7.0, install gapps, boot.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Yep...already did that and got it to boot just fine. Now I'm struggling with poor reception. I've seen other users (different phones) mention radio upgrades, but I was extremely unfamiliar with the terminology. The phone seems to work okay, but I only get 1x reception for data.
Or were you actually suggesting to repeat the entire process?
Edit - Tried again, still no luck with 3G.
vash265 said:
Yep...already did that and got it to boot just fine. Now I'm struggling with poor reception. I've seen other users (different phones) mention radio upgrades, but I was extremely unfamiliar with the terminology. The phone seems to work okay, but I only get 1x reception for data.
Or were you actually suggesting to repeat the entire process?
Edit - Tried again, still no luck with 3G.
Click to expand...
Click to collapse
Before doing what i stated did you wipe everything (system, data, cache, dalvik)? Also, you still getting a forceclose upon boot or just crap signal? And are you on sprint or electrify?
Acvice said:
Before doing what i stated did you wipe everything (system, data, cache, dalvik)? Also, you still getting a forceclose upon boot or just crap signal? And are you on sprint or electrify?
Click to expand...
Click to collapse
I wiped everything. I can boot into the OS and my phone works fine, but my data rate is stuck on 1x (so crap signal). I'm on sprint.
vash265 said:
I wiped everything. I can boot into the OS and my phone works fine, but my data rate is stuck on 1x (so crap signal). I'm on sprint.
Click to expand...
Click to collapse
well did you have 3g on stock? there's no reason it would go to 1x unless 3g is unavailable. the rom shouldn't cause it to go into 1x.
na7q said:
well did you have 3g on stock? there's no reason it would go to 1x unless 3g is unavailable. the rom shouldn't cause it to go into 1x.
Click to expand...
Click to collapse
Yep. Despite popular belief, I'm not a moron =) I'm in the dead center of 3G availability for Sprint in my area, and with stock android I get perfect 3G reception. I've read reports of the same things happening to other people, but haven't found a solution yet. I restored to stock after making a backup to try updating the PRL. I'll update again when I find out if it worked or not.
Edit - Sprint just sucks, apparently. http://www.sprintusers.com/forum/showthread.php?t=225908
When I rebooted to stock I checked the radio status and sure enough, 1xRTT. Evidently I am a moron =p
There was something wrong with the phone afterall. To fix it, I did the following:
Dial *#*#4636#*#*
You'll be presented with a menu. Go to Phone Information.
About halfway down the page, there will be a menu with a dropdown. Mine was set to CDMA. To fix the issue, I changed it to CDMA auto (PRL). I'm now receiving excellent 3G reception.
I have been running the Jellybean King Kang by Dagr8 for a while, and it's been great. I decided to make the relevant backups, do a full wipe, and flash the latest King Kang (Monster 1) and GApps. I am experiencing an issue I've never seen before after a fresh flash. I get a 4g signal, but the bars are greyed out and Play Store reports "server error". Wifi will connect but is unresponsive. The stock browser flashes white for a second and then suddenly force closes. The home button doesn't work.
I flashed back to my nandroid backup and everything is perfect again. As far as I know I didn't do anything wrong in the flash, but no one else has reported these problems. Is there a kernel update or something I missed?
Thanks everyone.
Could have been a bad flash or u needed to reboot until issue was corrected about 2 reboots
Bradl79 said:
Could have been a bad flash or u needed to reboot until issue was corrected about 2 reboots
Click to expand...
Click to collapse
I wiped and reflashed about 5 times. Also rebooted twice after the flash. No change.
Have a VZW DNA, currently on Hatka 3.0.3. S-Off, latest radio, stock 2.04 kernel. Twrp
Shortly before I flashed the new radios, I had a problem that whenever I tried to connect a call, whether incoming or outgoing, com.android.phone or.. process.acore?? would force close. I can't remember what the exact name of the acore force close was. Anyway.
I was pretty sure I fixed the problem before I flashed the new radios, but either way, I have the problem again. And, I have noticed that after the force close, the SIM seems to reset. Get a toast message for preparing the SIM card.
It makes no difference whether its the stock dialer, or a third party like Go Contacts. Third party apps don't force close, just go back to whatever I was doing before I tried to connect the call.
I tried flashing the viper with both dsb's stock and cubed kernel with viper to no avail. I haven't tried RUU, or old radios simply because I haven't had time to back up.
Any ideas before I do RUU?
Sent from my HTC6435LVW using xda premium
cappiez said:
Have a VZW DNA, currently on Hatka 3.0.3. S-Off, latest radio, stock 2.04 kernel. Twrp
Shortly before I flashed the new radios, I had a problem that whenever I tried to connect a call, whether incoming or outgoing, com.android.phone or.. process.acore?? would force close. I can't remember what the exact name of the acore force close was. Anyway.
I was pretty sure I fixed the problem before I flashed the new radios, but either way, I have the problem again. And, I have noticed that after the force close, the SIM seems to reset. Get a toast message for preparing the SIM card.
It makes no difference whether its the stock dialer, or a third party like Go Contacts. Third party apps don't force close, just go back to whatever I was doing before I tried to connect the call.
I tried flashing the viper with both dsb's stock and cubed kernel with viper to no avail. I haven't tried RUU, or old radios simply because I haven't had time to back up.
Any ideas before I do RUU?
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
I had the same issue today between 2 and 3, but it wasn't letting me send texts even though I could receive them. Maybe a network hiccup?
I am on stock radios, didn't know new ones came out. It is working for me now.
in the same boat
looks like we're in the same situation. I looked through the threads and this is another case of call errors. I found this thread and one other, not sure if it was droid dna related.
cappiez said:
Have a VZW DNA, currently on Hatka 3.0.3. S-Off, latest radio, stock 2.04 kernel. Twrp
Shortly before I flashed the new radios, I had a problem that whenever I tried to connect a call, whether incoming or outgoing, com.android.phone or.. process.acore?? would force close. I can't remember what the exact name of the acore force close was. Anyway.
I was pretty sure I fixed the problem before I flashed the new radios, but either way, I have the problem again. And, I have noticed that after the force close, the SIM seems to reset. Get a toast message for preparing the SIM card.
It makes no difference whether its the stock dialer, or a third party like Go Contacts. Third party apps don't force close, just go back to whatever I was doing before I tried to connect the call.
I tried flashing the viper with both dsb's stock and cubed kernel with viper to no avail. I haven't tried RUU, or old radios simply because I haven't had time to back up.
Any ideas before I do RUU?
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
sjhanson Today, 12:20 AM #1035
Junior Member
Thanks Meter 1
Posts: 11
Join Date: Jan 2011
I am running 3.0.3 now. I was running Viper until the big man published 3.0.3, then i switched back. But even on Viper I was getting the same COM.PHONE.ANDROID has stopped error.
Cheers!
http://forum.xda-developers.com/showthread.php?t=2126386&page=2
borkborkbork! said:
looks like we're in the same situation. I looked through the threads and this is another case of call errors. I found this thread and one other, not sure if it was droid dna related.
Click to expand...
Click to collapse
Link to any of the other threads?
http://forum.xda-developers.com/showthread.php?t=2157855
xDexter said:
Link to any of the other threads?
Click to expand...
Click to collapse
I had the same issue, actually was getting soft reboots upon receipt of an incoming call, happened to me after s-off. It took a bit of fiddling, but I finally got back up and running 100% by flashing stock kernel and a clean ROM install.
TheJ0hnman said:
I had the same issue, actually was getting soft reboots upon receipt of an incoming call, happened to me after s-off. It took a bit of fiddling, but I finally got back up and running 100% by flashing stock kernel and a clean ROM install.
Click to expand...
Click to collapse
You went back to S-ON or just a different kernel?
TheJ0hnman said:
I had the same issue, actually was getting soft reboots upon receipt of an incoming call, happened to me after s-off. It took a bit of fiddling, but I finally got back up and running 100% by flashing stock kernel and a clean ROM install.
Click to expand...
Click to collapse
I also tried going back to stock ruu , nothing worked for me
borkborkbork! said:
I also tried going back to stock ruu , nothing worked for me
Click to expand...
Click to collapse
I am having 0 issues anymore with S-OFF and .torrented's rom and suggested R/W kernel: http://forum.xda-developers.com/showthread.php?t=2150262
xDexter said:
I am having 0 issues anymore with S-OFF and .torrented's rom and suggested R/W kernel: http://forum.xda-developers.com/showthread.php?t=2150262
Click to expand...
Click to collapse
com.android.phone .. but I still get my txt messages, go figure. I think my partitions may be in rare shape from rom's, kernals, and all the other numerous changes. Never been the same after I got error 7 on schatka 3.0.2, I switched back and forth from viper/hatka and twrp/cwmr
I took my phone into Verizon yesterday, explained the situation. Told them it started after ota, and I had done a factory reset already. They tried a new SIM card to no avail, overnighting a new phone.
Sent from my HTC6435LVW using xda premium
xDexter said:
You went back to S-ON or just a different kernel?
Click to expand...
Click to collapse
Forgot about this post, sorry. Did not go back to s-on, just flashed stock kernel from here: http://d-h.st/Ma1, boot.img via fastboot and then the modules zip contained within in recovery, and everything was good.
This didnt work for me . Any other suggestions?
cappiez said:
I took my phone into Verizon yesterday, explained the situation. Told them it started after ota, and I had done a factory reset already. They tried a new SIM card to no avail, overnighting a new phone.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Basically I hd the same situation happen to myself, no calls or data but wifi was good. Mine started to fail slowly , firs \t it was showing a 1X connection but dl were about 3G speeds. Next I lost signals in areas I never had signal issues with. Then total loss. New sim card and spent hours on the support line and a replacement unit.
Got a PM request for assistance, and thought I don't have a lot of tips to offer other than what I provided before, I'm going to post a more detailed overview (as I remember it, it's been awhile...) in case it's helpful for any other who may come across it later. The bottom line for me was that once things broke, it didn't work again until I flashed stock kernel via fastboot +modules in recovery and did a clean install of Hatka 3.03 w/ Sense launcher. That said, because of my flashing compulsion and failure to fully test things once installed, I can't pinpoint the exact step at which things broke.
Initially, I: Bought phone and factory reset, did not take Verizon OTA. Fiddled around, hated Sense, unlocked, flashed recovery, flashed Viper 1.1.0 (?, whatever the base was), booted and setup, fiddled around, hated Sense, wiped data, flashed 3 subsequent Viper updates (1.1.1,2,3 maybe?), booted and setup, fiddled around, hated Sense. Wiped and reinstalled de-Sensed Viper a few times in an attempt to get rid of Sense as much as possible.
Then things get murky. I did s-off, and at some point flashed (recovery) a kernel, Cubed I think. Wifi or something was borked (as I understand is the case with Cubed/Viper), and I flashed stock kernel back via recovery (no modules, I didn't catch that part at the time) and restored my backup for good measure, leaving me on fully functional Viper 1.1.3. Everything worked for a few days, but I continued to hate Sense, and began searching for something more sensible. At some point I flashed Hatka 3.03 w/ de-Sensed options, went to 320 DPI, and thought everything was fine for about 18 hours until I realized my phone was warm, and figured out it was rebooting every time I received (or placed) an incoming call (boss was pissed and kept trying to call me, already gives me a hard time about being an Android fanboy so I'm never going to hear the end of that). After a few hours of fiddling and various recovery attempts including restores and full wipe/clean installs of Viper, I finally managed to get things up and running with A. flashing stock kernel via fastboot + modules in recovery and a full wipe/clean install of Hatka 3.03 w/ Sense + Xperia launchers and eventually a 380 DPI.
One of or some combination of the s-off/custom kernel/failure to reinstall stock kernel modules/de-Sensed/low DPI/pin lock/Widget Locker/Viper combo I had going fouled something up, which I know is not entirely helpful. If I found myself in this situation again, I would flash stock boot.img via fastboot + modules in recovery, and probably flash a stock ROM to rule out anything else, then wipe and flash things from there until I got where I wanted or it broke.
For the record, I'm now back on my Galaxy Nexus until stable-ish CM 10.1 is within sight or I get tired of waiting and sell the thing, I just can't tolerate Sense.
same issue
I've been reading wherever I see this topic and haven't found the answer that I'm looking for. Have tried everything said but nothing has fixed my problem can't make or receive calls. This problem happened after I turned s-off have relocked boot loader, flashed RUU, reset factory, re-unlocked bootloader, re-flashed different roms, and flashed radios still not working. No doubt it is a software issue. Does anyone know how to format internal storage on this phone. My thinking is if that can be done problem should go away and then can re-flash to stock. Any help would be most appreciated.
jimmydee62 said:
I've been reading wherever I see this topic and haven't found the answer that I'm looking for. Have tried everything said but nothing has fixed my problem can't make or receive calls. This problem happened after I turned s-off have relocked boot loader, flashed RUU, reset factory, re-unlocked bootloader, re-flashed different roms, and flashed radios still not working. No doubt it is a software issue. Does anyone know how to format internal storage on this phone. My thinking is if that can be done problem should go away and then can re-flash to stock. Any help would be most appreciated.
Click to expand...
Click to collapse
Have you tried fixing permissions? In some other post I read phone process force closing was just a matter of wrong permissions.
In other hand I think if you format system, data and cache the phone storage would just keep hboot and recovery; at that point you could only run RUU to stock or adb sideload from recovery if your CWM version has the feature.
Sent from my HTC6435LVW using xda app-developers app
still problem
Yes have fixed permissions. Also have formatted everything I could in CWM still have problem. Is there a way to format with ADB commands?