Does anyone know where i can get the lcd screen flex ribbon mine broke and i dont want to buy a whole new screen just for the cable. any help would be great.
stickjt said:
Does anyone know where i can get the lcd screen flex ribbon mine broke and i dont want to buy a whole new screen just for the cable. any help would be great.
Click to expand...
Click to collapse
Hi,
I am at the same position as you.
I trying to find a seller or supplier that ship the lcd flex ribbon (p4 cable) and i could not found anyone yet.
Also i know that even if you buy a new lcd screen the flex ribbon wont be part of the package. :crying::crying:
Someone please help us!!!
i too am looking for the same cable
OK guys, after digging a lot , (sending message all over the world, surfing the web, etc) i found a seller from ebay that can deliver the lcd flex ribbon for P7500 not the P710. But he is not sure that both use the same flex cable.
So we need to figure it this out.
See some picture about my cable attached (p7510), i believe the cable should be the same because both tabs are using the same LCD screen, right? the only big different is the 3G modem.
Hope someone could clear this out. :good:
Best Regards from Argentina
martocapo said:
OK guys, after digging a lot , (sending message all over the world, surfing the web, etc) i found a seller from ebay that can deliver the lcd flex ribbon for P7500 not the P710. But he is not sure that both use the same flex cable.
So we need to figure it this out.
See some picture about my cable attached (p7510), i believe the cable should be the same because both tabs are using the same LCD screen, right? the only big different is the 3G modem.
Hope someone could clear this out. :good:
Best Regards from Argentina
Click to expand...
Click to collapse
i believe thats the only difference from the p7510 and the p7500 ive used a p7500 digitizer on a p7510 so there defiantly compatible on parts do you mind sending me a link to the ebay seller
anyone?
ebay address for lcd ribbon
lost896 said:
anyone?
Click to expand...
Click to collapse
I bought mine, Cost [email protected] MuchBuy-Outlet store on ebay.
Related
Need help!!!
Smashed my LCD and orded a replacement from HK. The part number they sent me was 60H00037-00M. After installing it, all I get is a white screen. Sent it back and recieved another one with the same number and again the same deal!!!
The part number Im chasing is 60H00056-00m or TX0704APAA1. I think it is a mfg by Hitachi.
I cant find anything with this part number on the net and was wondering if anyone knows if there is an equivalent that could be used insted.
Mal..
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
teknics said:
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
Click to expand...
Click to collapse
Teknics, are yoy refering to the two incy wincy screws that fasten the ribbon to the d-pad at the bottom?
Mal..
Yes that cable, but also make sure the ribbon cable that slides into the locking connector on the main board is in properly also.
HK?????
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
sllabymkcus said:
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
Click to expand...
Click to collapse
HK refers to Hong Kong you can purchase screens and digitizers that i know of but as far as small inexpinsive electronics i think your sol. just out of curiousity did you manage to blow the speakers or what? i have played some pretty loud music through my hermes using mortplayer and have not managed to blow them yet.
I have 60H00056-00m or TX0704APAA1 LCD.
msn:[email protected]
I am looking for a TX0704APAA1 for my HTC Tytn.
Apparantly this is the Hitachi model other models are also available on ebay (Samsung and Toppoly). As I understand Samsung and Toppoly are not compatible with one another apparently they use different controllers.
As for the Hitachi I have know idea whether it is compatible with Samsung or Toppoly, which is why I am on my quest after the Hitachi...
Anyone know where I can get one?
I think this one might work.
http://cnn.cn/shop/8525tytn-screen-p-1704.html?osCsid=37d6ea546d0b93a035876bf59f229d3b
The 60h00032 or 60h00037 did not work on my dopod 838 pro.. I just got a white screen.
Hey Guys
I finally managed to crack my wizard (dropping it out of everywhere )
The prob is that I cracked only the touchscreen not the LCD.
The touchscreen seems to get the touches but it understands them differently.
For Ex:I push the Time on HTC HOME It opens the soft or left key dependent on where I'm pressing.
I found a touchscreen on e-bay without an LCD for 13 bucks so I ordered it but I wanted to know if anyone else had any luck with same situation
Aldo
Same case yesterday
I also drooped y phone yesterday and I have a crack line running across the screen but the touch screen is working ok for me. I saw the eBay auctions about screen and no lcd but what if the lcd is the part that is broken ?
can we change that too ?
tkdsl said:
I also drooped y phone yesterday and I have a crack line running across the screen but the touch screen is working ok for me. I saw the eBay auctions about screen and no lcd but what if the lcd is the part that is broken ?
can we change that too ?[/QUOTE
I have several times replace LCD in a wizard. It was very difficult for me to replace the touchscreen so i take the complete set. It is not only te replace the touch layer, but you must alse do some soldering.
And if jou replace the screen, the flexcable must be propperly fit. Before i assembley al, i first check if screen en touch are oke.
Click to expand...
Click to collapse
sleurhut said:
tkdsl said:
I also drooped y phone yesterday and I have a crack line running across the screen but the touch screen is working ok for me. I saw the eBay auctions about screen and no lcd but what if the lcd is the part that is broken ?
can we change that too ?[/QUOTE
I have several times replace LCD in a wizard. It was very difficult for me to replace the touchscreen so i take the complete set. It is not only te replace the touch layer, but you must alse do some soldering.
And if jou replace the screen, the flexcable must be propperly fit. Before i assembley al, i first check if screen en touch are oke.
Click to expand...
Click to collapse
would this item work for me them EBAY
I am comfortable opening the phone to fix it, for some reason cannot find the right part,
thank you.
Click to expand...
Click to collapse
tkdsl said:
sleurhut said:
would this item work for me them EBAY
I am comfortable opening the phone to fix it, for some reason cannot find the right part,
thank you.
Click to expand...
Click to collapse
It seems to be. I did it on a wizard and i know the HTC 8125 is the same one with a different housing.
I remember this kind off LCD picture. There is a dissasembly guide but you need a torx 4, plastic openingstools and a very tiny X screwdriver.
I use this kind off opening tool [URL="http://www.mobielbereikbaar.nl/Product.aspx?naam=Nokia+SRT-6+Opening+Tool+Origineel[/URL]
Other
If you want, you can replace display.
Click to expand...
Click to collapse
were would I find the entire display to replace mine with , I only found the LCD on ebay for the about 41 dollars ?
I have the kit for the ipod repair not sure about the Trox 4 I will check today.
tkdsl said:
were would I find the entire display to replace mine with , I only found the LCD on ebay for the about 41 dollars ?
I have the kit for the ipod repair not sure about the Trox 4 I will check today.
Click to expand...
Click to collapse
It is Torx5 i see
But here something from Hong Kong
This is a LCD witch tochscreen.
This is great, I will get that one and that should cover all I have the instructions allready. thank you.
Replacement LCD
you should check WWW.HTCLCD.COM they have it for $39 with the tools and in the usa
Hi
I bought this touchscreen on e-bay from a power seller and It worked.
I can use the touch again in my device.
Rgds
belize2004 said:
you should check WWW.HTCLCD.COM they have it for $39 with the tools and in the usa
Click to expand...
Click to collapse
I got one from them.With instructions and tools!Worked fine.Install was easy
i have succesfully replaced the touch screen on my tmobile mda vario.
check that the ribbon cable is exactly the same as whats on your phone. the first touchscreen i got of ebay the ribbon cable was slightlly different and after assembling it didtn work, after getting another one with same ribbon cable, worked perfectly.
Note that you will have to solder the ribbon cable, a good soldering iron with a very fine tip will make it fairly easy. ribbon cable is very small so soldering can be a tad fidgity.
Ipod Repair
You might want to check out http://www.ipod-repair-guide.com for more information.
No need to buy the lcd seperate from the touchscreen and resistance weld the cables
veda_sticks said:
i have succesfully replaced the touch screen on my tmobile mda vario.
check that the ribbon cable is exactly the same as whats on your phone. the first touchscreen i got of ebay the ribbon cable was slightlly different and after assembling it didtn work, after getting another one with same ribbon cable, worked perfectly.
Note that you will have to solder the ribbon cable, a good soldering iron with a very fine tip will make it fairly easy. ribbon cable is very small so soldering can be a tad fidgity.
Click to expand...
Click to collapse
I'd just go ahead and get the lcd screen with the digitizer. That soldering won't work unlest you can resistance weld the lcd ribbon cable and digitizer cable together and its only about $30 bucks on ebay now for them both together. Then you just get the repair manual, open the phone, swap the screen out and just plug it in and it works.
Is it easy to just change the touchscreen? how to do it?
Hi,
I had the same problem few month ago, and at that time the LCD screen was broken, and I had to change it by myself (with no big problems).
now I have a similar problem but just the touch screen is broken, I see that the price of just the touch screen is much cheaper that the whole LCD screen, but my doubt is:
How can I install just the touchscreen on th LCD,
I heard that you have to solder it.. but how? and is it easy?
is someone of you knows how to do it please post the istructions...
Luca
ohh... sorry, I sow just now that someone already answered to this questions...
I didnt see that there was a second page of the thread
anyone knows hot to replace the Touchscreen ?
if there is a guide or pictures is the best!
thanks
seclimar said:
anyone knows hot to replace the Touchscreen ?
if there is a guide or pictures is the best!
thanks
Click to expand...
Click to collapse
I say if you are asking for instruction or pictures on how to replace a touch screen, you will not be able to do it yourself, it's a specialised techie job. I suggest replacement of the entire unit assembly - LCD+digitizer.
enigma is right.
Changing the digitizer is not an easy job. I recently had a "blind spot" in the middle of the digitizer, and I did not even think about changing it. Instead I obtained a LCD/digitizer unit from *bay for a bit above 20 Euros including postage (from China). Changing the LCD unit was done in 20 minutes all in all, and now my good old Wizard works fine again.
If you decide to buy a complete unit (I would really recommend this!), be shure to buy the right one, there are two types, one with a "gold ribbon", one with a "black ribbon". So, first you have to open your Wizard and look which type you need. Good luck.
htc housing
Hi guys, my trusty old wizard has finally fallen apart. the hain housing is craked even though the lcd and the phone itself is still in top condition. I am looking for a new housing so I can replace the old one and end up with a virtually new phone. Could someone point me to the right place please. I have been trawling the internet these last few days but because they have been out of production for that long, there does not appear to be any places I can get a housing to buy. Your help will be deeply appreciated.
Cheers.
I can't speak English very well. sorry.
Yesterday, I was doing teardown my atrix. It's forth time. But I splited some
thing. I don't know what was that name. It looks like electronic tape, black tape.
and It's connected lcd panel backside.
Anyway, what should i do? go to the bell store to repair? or buy a new lcd panel
on ebay? Which way is more fast & cheap?
help me please..
You could try to fix it yourself or go to the bell shop and say you 'accidentally' dropped it. I'm sure they will help you out!
Sent from my MB860 using XDA App
have a look here
http://www.globaldirectparts.com/Motorola-ATRIX-4G-MB860-LCD-Screen-p/mot1039610.htm
is it the flex cable that you broke?
if not goto the teardown page on ifixit and circle the part that you broke in paint and upload here, or just take a photo.
tjjensen23 said:
have a look here
http://www.globaldirectparts.com/Motorola-ATRIX-4G-MB860-LCD-Screen-p/mot1039610.htm
Click to expand...
Click to collapse
Those guys only sell wholesale.. You can't buy from them if you are a 'normal' user repairing your own phone.
Post a pic of the damaged cable.
It may not be the LCD after all.
Sorry for my poor english.
I have to replace back hard cover (and aluminium frame) of my TF101 but I don't know where to buy it, anyone can help me?
h**p://m.zdnet.com/photos/cracking-open-the-asus-eee-pad-transformer-tf101/6272908?seq=12
Thanks in advance
The quality of construction of these parts are very poor (the joint parts break themeselve so easily) so I'm happy if there is other brand (not asus) that produce them
Try here
http://www.asusparts.eu/index.php?cPath=66920_222155_222301_222308
Thanks,
it's exactly I was looking for... but 50,44 euros for the alluminium frame are a theft!
Most TF's that are unfortunate enough to suffer some kind of trauma ends up with a broken or cracked screen. I'm surprised you can't find a replacement screen anywhere... at all.
goodintentions said:
Most TF's that are unfortunate enough to suffer some kind of trauma ends up with a broken or cracked screen. I'm surprised you can't find a replacement screen anywhere... at all.
Click to expand...
Click to collapse
You can get the LCD screen here.
pbtran said:
You can get the LCD screen here.
Click to expand...
Click to collapse
It's the glass digitizer that's the problem getting.
baseballfanz said:
It's the glass digitizer that's the problem getting.
Click to expand...
Click to collapse
and thats what i need for one of my TF, glass intact but under it is cracked
Has anyone found a cheaper alternative for the bezel? I figured it would be like 10 bucks when I tore mine off out of frustration over the sticky power button... now the back is falling off lol.
Also want to buy the bezel.
C'mon, china brothers, start to make them! You will have million orders!
on Asusparts.eu with shiping it costs 71 Eur. ... Almost $100 for cheap aluminium frame ... Will their bezel do BJ ?
As of lately, is there anyone who has found a site in the USA which sells the parts? Don't really want to order my part from Sweden... I need a Power/Volume daughter board, its about $89 shipped from sweden... really want it sooner than 5-6 weeks.
Need some help to find 40-Pin Female socket for my tablet
Dear All:
I do have a problem with the female socket in the Asus EEE TF101
in first I thought that the problem in the charging cable and I replace it but looking into the female connector in the bottom of the tablet I could see some burn inside the socket
need to but this female socket
can any one help me with where to find this part and part no if possible
Thanks
parts4repair dot com
ran across this place with screen+digitizer $40 and LCD $40
thought id post it up
sameh71 said:
Dear All:
I do have a problem with the female socket in the Asus EEE TF101
in first I thought that the problem in the charging cable and I replace it but looking into the female connector in the bottom of the tablet I could see some burn inside the socket
need to but this female socket
can any one help me with where to find this part and part no if possible
Thanks
Click to expand...
Click to collapse
search on ebay my friend.
Did you try alibaba? It's a Chinese website where you can sell and buy parts.
Sent from my HTC Vision using xda premium
I actually oredered the colume ctrl pcb from auasparts.eu ... 4-8 weeks to the USA but for $49US I have my part. Got the tablet for free so no complaints here lol
Posted using XDA Premium from my Galaxy Note 2
Hey, first time tread starter and maybe there is a tread already for my question but I cant find it. So my question is, on my atrix 4g, I was replacing the digitizer and when I was pulling up the triangle/ arrow part of the flex cable that snaps onto the digitizer connector I ripped it off on accident, I wanted to know if that would be a cause for my brand new digitizer not working?
I already ordered the flex cable off ebay and it should be here by the end of the week. I buy and sell phones on ebay so I know how common it is to get bad digitizers.
I am asking here in order to see if that ripped triangle/ arrow that points down on the flex cable is the cause of the non working digitizer or is it the a faulty digitizer from the seller that sold it to me?
I am attaching a picture of the piece I ripped off, it is circled in red. If it cant be seen please let me know, as I have never done this before.