Basically, I had attempted a kernel flash via CWM Recovery which failed and I bricked the phone, I had to then reflash a new firmware to the phone via Odin(counter is now 1).
Prior to this stupid thing, I had backed up my kernel and flashed it back after I flashed the new firmware(which also had a different kernel), so in Settings->About I see the exact same information I had prior to my reflash.
Perhaps my problem is in CSC. This is a screenshot of the phone info from dialing *#1234* http://i.imgur.com/zs34X.png.
P.S
When I flashed the new rom, I found a BBC iPlayer inside, which was not present before, indicating something about UK(GB).
P.S 2
I am running ICS 4.0.3, rooted(with the method that doesn't require flashing an insecure kernel and can be done through CWM Recovery).
dikidera said:
Basically, I had attempted a kernel flash via CWM Recovery which failed and I bricked the phone, I had to then reflash a new firmware to the phone via Odin(counter is now 1).
Prior to this stupid thing, I had backed up my kernel and flashed it back after I flashed the new firmware(which also had a different kernel), so in Settings->About I see the exact same information I had prior to my reflash.
Perhaps my problem is in CSC. This is a screenshot of the phone info from dialing *#1234* http://i.imgur.com/zs34X.png.
P.S
When I flashed the new rom, I found a BBC iPlayer inside, which was not present before, indicating something about UK(GB).
P.S 2
I am running ICS 4.0.3, rooted(with the method that doesn't require flashing an insecure kernel and can be done through CWM Recovery).
Click to expand...
Click to collapse
wipe and flash a stock firmware with its stock kernel, by then you'll be able to connect to kies
Related
so, I've had my SG2 for like a month now, rooted and all, but the problem is , i can't flash any other ROMs(but stock ROMs) or kernels (except for CF root,stock and siyah kernels ) on it via CMW... each time i tried to flash anything, i end up stuck at "galaxy s2 GT-I9100" boot-up logo.... I've tried flashing CM7 then i got the boot-loop ( even with double flash, or triple didn't work for me) and i can't get into CWM when i got the boot-loop....
someone please help me.. i read alotta threads and none of them got similar issue like mine...
i guess its true what they say : every galaxy s2 is different from the rest.
Hmm....must be something you're doing wrong. Nothing to do with Galaxy S2 being different.
Have you always followed the dev's instructions while flashing roms?
Wiping data, cache? Matching up the kernels and roms?
As far as I know, there hasn't been a single person who completely failed to install VillainROM on their SGS2.
I would advise you to give it a go.
Transmitted from a Galaxy far far away via XDA lightspeed telepathy.
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
tomascunill said:
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
Click to expand...
Click to collapse
If your phone has cf-root/kernal and cf cwm can you just flash over top codeworkx's kernel and do you have to re-root?
InFa_ReD_1 said:
If your phone has cf-root/kernal and cf cwm can you just flash over top codeworkx's kernel and do you have to re-root?
Click to expand...
Click to collapse
If you already have root then you won't loose it.
geko95gek said:
Hmm....must be something you're doing wrong. Nothing to do with Galaxy S2 being different.
Have you always followed the dev's instructions while flashing roms?
Wiping data, cache? Matching up the kernels and roms?
As far as I know, there hasn't been a single person who completely failed to install VillainROM on their SGS2.
I would advise you to give it a go.
Transmitted from a Galaxy far far away via XDA lightspeed telepathy.
Click to expand...
Click to collapse
I used to use VR 3.0 but could only work with stock kernel or cf root kernel has never booted with the ROM's kernel..
tomascunill said:
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
Click to expand...
Click to collapse
My phone came with CM7, but i flashed it with rooted stock coz i wanted to have a feel of it... but now i'm done with it but i can't get any roms to work... so frustrating.
i literally have tried flashing ALL Roms (ligtnung, gingerbread,vr, cm7), during the 1st few days that i got my phone it worked with VR 2.5 and 3.0, even MIUI.. but after i flashed with some Asian stock ROM via odin... nothing would work through cmw anymore...
i seriously don't know what i did wrong...
btw, right now im using basebad ver: I9100XXXKI4, kernel: 2.6.35.7-siyah [email protected]#20, build number GINGERBREAD.ZSKI3.
I really don't know. YOu should try to go the closest possible to stock and try from there. DO a full wipe, wipe data, wipe system, everything and flash a stock ROM from your country and carrier (there is a thread from infratech where you can get carrier specific ROMS). THen connect your phone to kies (maybe yo get an oficial update) and then do everything from scratch, root, install CWM, etc...
That's what I'd do but I really don't now if it's the best option.
i have almost the same problem,but me i can flash any rom,but the problem is with the kernel my phone refuse to boot on any other kernel else than cf-root and the speedmod,it freezes in the kernel loading so i must turn it off and reflash via odin cf-root or speedmod to get it works again.
tomascunill said:
I really don't know. YOu should try to go the closest possible to stock and try from there. DO a full wipe, wipe data, wipe system, everything and flash a stock ROM from your country and carrier (there is a thread from infratech where you can get carrier specific ROMS). THen connect your phone to kies (maybe yo get an oficial update) and then do everything from scratch, root, install CWM, etc...
That's what I'd do but I really don't now if it's the best option.
Click to expand...
Click to collapse
well, i'm gonna try that and see if it works, am also goin' try to see if downgrading to 2.3.4 or something would work too...
but please if you got any more ideas, just keep it coming..
thanks
Phew! NOW I HAVE CM7 RUNNING ON MY PHONE!!
I'm gonna try to explain how i fixed my issue, as clear and explanatory as i can..
lucky i didn't brick my phone during all this, because I tried so many things and none worked.I unsuccessfully tried downgrading to XWkI4, ZCKI4, and alot others via Odin... after flashing all i get is tons of error messages(on 3e recorvery) E: can't open/cache or E:failed blah bla bla to load /efs... i thought OMG! my phone is bricked! then i recalled reading somewhere that flashing the 3 tar (PDA,MODEM,CSC) files usually should work(maybe better than flashing a 1 tar file), so i found a 3 files xxKI3 rom, flashed it and BAM! it booted up this time without any error. so now i went ahead and rooted it since the tar files came unrooted, then went into CWM to flash cm7 ROM, flashed it twice and ofc i got stuck on boot logo.....i didn't panic much, i pulled out the battery, and restarted to CWM where i cleared cache/ dalvik/ and did wipe/factory reset, then i reflashed CM7 again (twice) and it worked!!!! YES, CM7 is fiannly working on my SG2!
thanks for everyone for helping, and i hope this can help others on the same boat as me..
Hello,
Today I thought, let's try out ICS! Found this guide (can't post outer links, search for "android advices ICS Android 4.0.1 XXKP2 " in google), and used it to update my phone to ICS.
Well, after trying out the rom, I would like to go back to my MIUI backup, rooted it, installed clockworkmod recovery and booted up the recovery mode. The recovery said "can't mount /cache/*" for all cache folders. So I couldn't restore my backup.
After reading some stuff I installed a recovery through Odin. Worked like a charm, no alerts of mounting failures. Restored my backup, but when it was rebooting it gave an "Kernel Panic - Upload mode" screen. Couldn't do anything, so put the battery out and back in.
After this I installed ICS again with the same steps as in the guide. This worked! Rooted and installed recovery again, no problems so far. Tried a fresh install of MIUI but with the same problems.
So I can flash ICS but I can't flash any other rom, what can be the problem?
Every help and tips are welcome!
Thanks in advance!
Same thing happened to me last nite, kernel panic, and im panic too. This happened after flashing that cm9 coz i just wanna try and see how cm9 look like and i know im not going to stick with it, just for trying. Now im back to miui.
What i did is i flashed back to stock rom, root, then flash miui, or any rom that you want. Very simple.
Rom : MIUI ICS XGT 'EXTENDED'
Kernel : Xcell-69X
Modem : XXKP8
Sent from Galaxy SII
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Gepstra said:
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Click to expand...
Click to collapse
Thats not true my friend, you flash any custom rom. Nothing need to worry about.
Rom : samsung stock firmware
Kernel : stock kernel
Modem : stock modem
Sent from Galaxy SII
Gepstra said:
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Click to expand...
Click to collapse
Did you make sure to flash back the old GB bootloaders? Restoring a backup wont flash them back.
Hi All,
i've been trying a few roms and recently i tried to upgrade to a newer nightly build of CM7.
I got the Kernel panic upload mode message you get when you have installed a bootloader from an ICS rom (as i did when i was trying the XXLPB).
Thing is, i tried to reflashing XXKL1 (like i did in the past) and it seems to work ok but firmware seems to be pre-rooted. Not only that but USB debugging seems to be enabled by default (after the reboot from odin).
I downloaded this firmware twice from sammobiles and its the same. I downloaded XXKI3 and that seems to work ok.
anyone know what may be going on?
When i flash KL1 then i normally flash siyahkernel with CMW then i flash cm7 but now in this state that i'm in, once i install cm7 i get a kernel panic upload error even after
Hi Everyone! just a rookie here in need of a bit of advice.
I'm a Galaxy S II I9100 owner and have my phone rooted and all setup with custom roms and been comfortable with flashing for some time now. My ROM of choice recently was Vanilla Rootbox and have to say the ROM has been fantastic with very few bugs to report. Last night i recieved the OTA update via Goo Manager for Vanilla Rootbox 3.4. I downloaded the full update over wifi and flashed with all wipes no worries. Next step was to flash the latest GAPPS and i figured there would be nothing wrong with flashing the GAPPS zip i had on my sd card that i had downloaded the last time i was notified of a GAPPS update via Goo manager as well. After flashing, wiping everything and rebooting again. My phone then booted up to a series of dialog boxes indicating that many google processes had stopped functioning. apps.google.com etc etc. A similar error has been reported in the Vanilla Rootbox thread by another user but i wasnt able to report this bug their either because my post count is too low to post in a development forum. So after seeing this error i rebooted into recovery to flash my last backup but CWM recovery came back with an error messaging stating it couldnt mount either ext or int sdcard. i did a factory reset which made no difference to the problem whatsoever. I then downloaded ODIN and the latest stock ICS Rom and flashed it via ODIN with no reported errors. My phone now boots through the optus boot animation and is stuck at the Galaxy S 2 screen with the flashing red and yellow animation over the S. If i turn off the phone with the power button, the phone turns off and immediately starts again and gets stuck at the flashing s screen. I've taken the battery sim and ext sd card out and put it all back in only for the problem to persist.
If anyone could help me there's a donation and my thanks in it!
Much appreciated
Nick
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
gastonw said:
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
Click to expand...
Click to collapse
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
darkstar117 said:
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
Click to expand...
Click to collapse
wow wow, leave pit files alone for now, they are nasty.
What stock ROM did you flash? 4.0.4 or 4.0.3?
You can factory reset via recovery mode.
Try installing kies anyway, it can't never hurt. Just make sure all applications are closed before you re-flash.
here's jb leak, might help:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
darkstar117 said:
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
Click to expand...
Click to collapse
Tell me your:
Model
Firmware
Country
Carrier
Always mention this
try flashing jb leak (ROM, modem & kernel package).
So I have a Sprint Galaxy Mega and it seems as though it may be semi-bricked. It will not boot past the GALAXY MEGA logo. It will just continuously power cycle to and from that logo. If I attempt to put it in recovery, it will say "RECOVERY BOOTING" in blue letters as usual, then power cycle right back to the GALAXY MEGA screen. It will boot into Odin mode and accept Odin files, but after attempting do do a typical "stock Odin" scenario, nothing has changed. I looked around for the Pit but cannot seem to find it. Does anyone has a reliable link to the latest Odin stock restore and the PIT file that matches it?
Maybe an error with your system data. So you can't reboot into recovery ? If you can try to wipe data and cache and reboot.
It may be an abnormal re-partition when flashing stock rock, and then I can't help you (have the i9205 international model). Some members of this section have the Sprint version, try to send them a PM if nobody can help you
Nope, no recovery. I was considering flashing a custom recovery to it to see what it does but I don't wanna kill the phone any more than it already is...
Yes I understand. But flashing custom recovery can solve your problem, only if you can boot on it. I think it can't make more damages to your phone, he just always stuck on boot phase like a brick, but if you don't want to try, wait for a developer making you a PIT file. More safe, the Galaxy Mega have a too poor development support for risk anything...
Well I went ahead and flashed TWRP to it. It will boot into TWRP just fine. Tried flashing the stock L900 ROM zip and it still won't boot.
Well I installed a custom ROM, SlimKat, and the phone boots. If I install the stock ROM located in the following link, OP's signature, the phone goes right back to bootlooping. ???
I need either the stock ROM or a ROM with dialer codes because this phone will be flashed to a regional carrier.
what recovry version you use bro. maybe recovery problem. try use your custom rom to flash another recovery from philz. the latest one. some time recovery dont work properly to downgrade from 4.4.2 to stock 4.2.2.
Great, so with Philz Touch Recovery, I never had problems for downgrade and I do this often for testing roms. Now it should not bootloop if you reflash stock.
I am using "CWM-based recovery 6.0.4.7"
I will try Philz recovery
After trying Philz recovery to flash the stock file I found, it once again bootlooped. Is there another stock ROM floating around somewhere or possibly a custom ROM that has dialer codes such as ##3282# enabled?
No idea... But actually the most complete stock based custom rom is MegaFire I think. Flash V5 (not V5x !) it should be enabled.
I don't see what is the problem while flashing stock rom... Oh ! Maybe you haven't enabled USB Debugging, I forgot to do that one time and I had some issues, in case you try to flash a firmware where Knox or others features are on with a modem without these, may cause bootloop. I've searched for 2 days before solve that little problem...
Have you tried another firmware ? If you can flash custom rom, something went wrong before flash... Odin folder is complete ?
Strange...once again a boot loop after flashing the MegaFire ROM
I'm almost certain I need the PIT file. I cannot find it anywhere.
Well I got the phone to boot from that rooted stock ROM FINALLY. I don't remember for sure but I think what I did was first flash TWRP, then flashed boot.img.tar that I found somewhere, it was listed for the Sprint Mega. I then booted into TWRP and flashed the stock rooted ROM(zip) I mentioned before. It now boots perfectly and everything works except one tiny little detail. No WiFi, no cellular signal at all. Baseband version: unknown in About phone.Already tried flashing the Sprint stock modem from the same download link as the ROM and it didn't work.
I'm having the same problem too dude, I
I download n flash all.the firmware I could find online, since I have no idea what the country of origin is. But most of them work, but no WiFi, Bluetoothand the sim card slot don't read
VirtueToVice said:
Well I got the phone to boot from that rooted stock ROM FINALLY. I don't remember for sure but I think what I did was first flash TWRP, then flashed boot.img.tar that I found somewhere, it was listed for the Sprint Mega. I then booted into TWRP and flashed the stock rooted ROM(zip) I mentioned before. It now boots perfectly and everything works except one tiny little detail. No WiFi, no cellular signal at all. Baseband version: unknown in About phone.Already tried flashing the Sprint stock modem from the same download link as the ROM and it didn't work.
Click to expand...
Click to collapse