80G9 Turbo broken?? - Gen8, Gen9, Gen10 Q&A, Help & Troubleshooting

Yesterday i tried to update my device to newest Archos firmware.
First it seems everything is okay.
During update process the device fall back in a boot loop.
I stopped this after a while with shut down and then tried to get in recovery mode.
Recovery doesn´t work, my display shows for some seconds ArchosA80S Starting......, then shut down.
Please help me, i need some Ideas to have an working Recovery Mode.

Related

Help! Boot Loop or Complete Brick? :(

So a friend recently bought this spanish voxter tab 97 IPS (16GB) and after a few days of usage and several attempt to install a custom ROM, the tablet stopped booting. According to him, he tried loading a "compatibility bla bla bla.zip" file with CMW which I really do not know what it is, and since he did the installation, the tab stopped booting into system. Every time it's turned on, it just stops at the boot screen and nothing more. Although before this, he had installed a custom recovery and had also done a Nandroid backup with the recovery. However, what baffles me is, CMW is no longer accessible through the normal "power + volume up" key combo and I'm quite unsure of how to boot into fastboot.
That aside, I tried booting into recovery with adb because apparently, adb recognizes the device whenever it's stuck at boot screen, this also failed, neither did rebooting into fastboot via adb work. All I need to know is if this device is totally bricked, or if there's still something I can do. If there's any, I really would appreciate every help offered. Thanks..

Lenovo A820 won't start

Hello everyone!
I have a Lenovo a820 with Lambda rom 2.4v.
I'm using it for a couple of weeks now with this last version, and everything was fine, until suddenly it froze for a while, I unplugged the battery and plugged it again, and what I notice was that the phone restored itself to when after I installed the rom (meaning all of the apps were gone).
So I tried going into Google play, installing some apps back, and I get this error -24 telling me its unable to install the app, happened with any app I tried. so after trying a few suggestions from the internet about this error, I decided to format it and install the rom all over again.
I go back to recovery mode with CWM, try to install the lambda rom like I did before, and in the middle of the installation it reboots and gets stuck in the "lenovo" screen like when you boot it. so after waiting for a long time I unplugged and plugged the battery again, went through the procedure again this time it installed it 100% rebooted so it would boot with the mod, and again, it freezes at "lenovo" start screen unable to boot.
went on recovery mode, formatted system, data, emmc, everything... I think that's the issue here. but im not sure.
After that, tried to install again with the same problem.
The problem now is. it won't even start I press the on/off button to start it normally, and I dont even get the "lenovo" screen, I tried going into recovery mode and no luck.
It's like the phone is dead! Although I have another Lenovo A820 and I tried the battery, and its 60% so that's not the battery.
Do you guys know any tricks? or any tools that I could use to get my phone running again?
I would appreciate it very much, any help you can give.
Matt.
MatWho said:
Hello everyone!
I have a Lenovo a820 with Lambda rom 2.4v.
I'm using it for a couple of weeks now with this last version, and everything was fine, until suddenly it froze for a while, I unplugged the battery and plugged it again, and what I notice was that the phone restored itself to when after I installed the rom (meaning all of the apps were gone).
So I tried going into Google play, installing some apps back, and I get this error -24 telling me its unable to install the app, happened with any app I tried. so after trying a few suggestions from the internet about this error, I decided to format it and install the rom all over again.
I go back to recovery mode with CWM, try to install the lambda rom like I did before, and in the middle of the installation it reboots and gets stuck in the "lenovo" screen like when you boot it. so after waiting for a long time I unplugged and plugged the battery again, went through the procedure again this time it installed it 100% rebooted so it would boot with the mod, and again, it freezes at "lenovo" start screen unable to boot.
went on recovery mode, formatted system, data, emmc, everything... I think that's the issue here. but im not sure.
After that, tried to install again with the same problem.
The problem now is. it won't even start I press the on/off button to start it normally, and I dont even get the "lenovo" screen, I tried going into recovery mode and no luck.
It's like the phone is dead! Although I have another Lenovo A820 and I tried the battery, and its 60% so that's not the battery.
Do you guys know any tricks? or any tools that I could use to get my phone running again?
I would appreciate it very much, any help you can give.
Matt.
Click to expand...
Click to collapse
The boot.img must be wrong try rom for your phone.
Sent from my Moto G

[Q] Stuck in bootloop and recovery vanished

Ok, so something seems to have gone very wrong with flashing my phone :S
I managed to get recovery working yesterday, and followed the steps in this thread, http://forum.xda-developers.com/xperia-z2/general/4-4-4-creating-rooted-update-package-t2933155 , to create a pre-rooted 5.0.2 image. I put it on the external SD card, booted into recovery and installed the flashable zip, then used flashtool to flash with the instructions (though I also cleared Appslog, Cache and Data to get a fresh install). This went fine and everything appeared to be ok. I then tried to get the Xposed Alpha installed, but after that whenever the phone was rebooting it just hung if trying to boot to Android. I tried re-flashing with Flashtool, but still got the same issue. Would boot fine the first time, but then any restart it would just hang and crash out. Tried clearing the cache from recovery, but no difference.
So today, I went into recovery, re-installed the flashable.zip, then powered off the phone and flashed using flashtool, just as I had yesterday. Now though, my phone wont boot. It shows the Sony logo, then a blank screen, then restarts. Even worse, it will no longer boot into recovery. I hold the volume down button when the LED shows, nothing. I try holding the volume down button all the way through several bootloops, nothing.
I've tried to re-flash using flashtool which goes through the process ok, I can hold the volume down button and connect the cable once its in the process of rebooting, and it goes through all the process fine. It then powers off as expected and I can just disconnect and power on the phone. But it's still stuck in the bootloop and I don't have TWRP recovery.
Is there anything I can do to get my Z2 working?
Update - Re ran flashtool, this time not excluding system, only Partition. It now gets a little further, going to "Powered by Android" and giving the purple wavy lines, but after a minute or so it just hangs and restarts again. And still no recovery sadly....
I think I've got it sorted...
Used Flashboot again to do a flash, excluding System and Partition. This time the phone does boot up normally. The downside being that my root was gone. Despite my flashing a pre-rooted image, it seemed to just put a stock image on. And my recovery is still mysteriously gone.
In the end, just to get things completely back to a stable/stock starting point for later on, I ran a repair from PC Companion. Seems I was in the none rooted position anyway so figured I'd get myself to a more certain position. At least this way I can wait for someone to come up with a root for 5.0.2 so I can root and get recovery back.

entering nvflash recovery mode/nv3p server

I rooted my phone with kingroot and it worked fine and i didn't touch it anymore. then i came back i tried to turn him on and the screen didn't turned on so i removed the battery and i tried again, but same result. now every time i use wiko software to go back to stock rom, it gets stuck on this black screen saying "entering nvflash recovery mode/nv3p server". can someone help me? thanks

Nexus 10 bootloop

Hello
I tried to root my nexus 10 with the nrt by wugfresh. Everything went smooth and when I pressed unlock bootloader button. The tablet restarted and went into a bootloop. I searched the internet how to solve and I managed to get into recovery mode. But before doing anything in recovery mode, I decided to use flash stock + unroot button to fix my tablet and I set tablet status to bootloop. Everything works until it restarted my tablet. Now every time i start my tablet it doesn't even show the google logo, it goes straight to android guy with the hatchet open and I can't select anything. When I go to recovery mode, it just restarts my tablet and goes to the android guy again. Nothing works anymore. Please help me. Thank you

Categories

Resources