Hi All
(I'm so sorry I'm new about all this things)
I'm facing problem to flash my SGS2 (GT-I9100) with CynogenMod 9.
Below is the progress :-
- stock kernel Samsung 4.0.3 ICS (forget the kernel)
- Odin with kernel CF-Root-SGS2_XW_OWW_LPE-v5.5-CWM5
- Rom Manager - install # cm-9.0.0-RC2-galaxys2.zip
# Gapps CyanogenMod 9
# NOT wipe / cache
# Reboot
@ after waiting long time at the screen just showing CynogenMod10 logo. So many time try with take out the battery but its fail.
@@ I can charge my phone like normally
Please help me. How I can recover / become my SGS2 to normal.
Thanks in advance for your help.
Reflash the ROM via CWM recovery and the flash gapps and reboot... everything will be fine
Sent from my MZ601 using xda app-developers app
iamanoopmk said:
Reflash the ROM via CWM recovery and the flash gapps and reboot... everything will be fine
Sent from my MZ601 using xda app-developers app
Click to expand...
Click to collapse
+1
Sent from my Toaster using Tapatalk 2
How I can reflash using CWM recovery because I cant access it. When I switch on my phone nothing happen its only showing CyanogenMod 9 logo at the screen until my phone became hot.
Please help me.
Jusri said:
How I can reflash using CWM recovery because I cant access it. When I switch on my phone nothing happen its only showing CyanogenMod 9 logo at the screen until my phone became hot.
Please help me.
Click to expand...
Click to collapse
Hold volume up, home and power button continuously till phone reboots... this should boot it into recovery
Sent from my MZ601 using xda app-developers app
Related
My phone's battery was low so i tried to boot it a couple of times including a recovery boot (hold buttons down), but since that i kees booting into recovery. the samsung screen loads, then re-flashes and boots into recovery. i tried to delete cache/reset/even complete SD card install but to no avail.. please help!
30secs said:
My phone's battery was low so i tried to boot it a couple of times including a recovery boot (hold buttons down), but since that i kees booting into recovery. the samsung screen loads, then re-flashes and boots into recovery. i tried to delete cache/reset/even complete SD card install but to no avail.. please help!
Click to expand...
Click to collapse
What Rom are you running? It sounds like you are stuck in a boot loop.
Sent from my SCH-I500 using xda app-developers app
scarfman4 said:
What Rom are you running? It sounds like you are stuck in a boot loop.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
AOKP. I am stuck in a boot loop.. tried installing other ROMs but keep getting back in the boot loop into recovery.
I need some help ASAP!
Try pulling the battery for 10 minutes then make sure it's fully charged then go into recovery. and flash rom again
you might have to use odin and flash your phone back to stock.
None of my attempts to recover worked.. so i decided to ODIN to stock and back to AOKP. So far so good.. AOKP stock loaded, now i'm going to try and do a backup restore.
One thing i missed though --- i didn't install the atlas file with the stock ROM.. does it matter? what does it do anyway?
The reason you bootlooped was because you 3 fingered to recovery on an ics rom, which is a big no-no. Always boot to recovery via power menu. You should have re-partitioned using the pit file, but if everything works I wouldn't sweat it. If you start to get fc's then you know where you went wrong.
Sent from my SCH-I500 using xda premium
mezster said:
The reason you bootlooped was because you 3 fingered to recovery on an ics rom, which is a big no-no. Always boot to recovery via power menu. You should have re-partitioned using the pit file, but if everything works I wouldn't sweat it. If you start to get fc's then you know where you went wrong.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
You're right.. that i did. My phone was blank and the power button just wouldn't boot the phone so i resulted to the force-recovery. Everything seems to be working, and i'm going to flash to milestone 6 while i'm at it. Anything i should watch out for other that FC's? i've actually read while doing research that Atlas may actually cause instabilities..
GT-s6500D
Hello i was in CWM recovery advanced menu when i accidentaly pressed reboot recovery option.
Now the phone always boots in recovery. Help please. i have downloaded stock ROM, but lost USB cable. I placed ROM in sd using adapter and tried to install it but it didn't work.
CastroBoy1975 said:
Hello i was in CWM recovery advanced menu when i accidentaly pressed reboot recovery option.
Now the phone always boots in recovery. Help please. i have downloaded stock ROM, but lost USB cable. I placed ROM in sd using adapter and tried to install it but it didn't work.
Click to expand...
Click to collapse
1yr old thread dude just flash stock ROM in Odin and get another USB cable wait how do you charge IMO
Sent from my SCH-I500 using Tapatalk 2
Thanks
bbrad said:
1yr old thread dude just flash stock ROM in Odin and get another USB cable wait how do you charge IMO
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. Can you please tell me how to flash ROM using Odin please.
P.S.This was the only place to come to.
Ok everything is fine now.
Thanks for help.
I recenlty installed CM10 latest and all worked fine . Today i decided to change the Kernel . I picked SiyahKernel S3 v1.7b6 but because i wasnt patient i installed the kernel not for i9300 model ...but for i900 galasy s .
I know that was a stupid mistake . Is their any change to bring my phone to life again .
Now it only stacks at Logo : Samsung Galaxy s3 i9300 ...and nothing after that .................
Any help will be valuable.
Thanks a lot
Try flash the correct kernel again. If it still stuck, then factory reset and reflash whole rom again.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Try flash the correct kernel again. If it still stuck, then factory reset and reflash whole rom again.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I cannot boot to recovery mode how can i flash correct kernel ?
Then u have to try flash kernel (.tar) with odin.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Then u have to try flash kernel (.tar) with odin.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
As i reallize for what you are saying i have to do it with odin via USB . Thats not an option . I cannot boot into Caynogen . I cannot pass the stage with the logo
"Samsung Galaxy s3 i9300" this logo it stucks there i cant even go to the next logo "Samsung" with the animation of the cyrcle !
pull your battery out, leave for 5 mins, reinsert, and try getting into recovery with three button combo again
slaphead20 said:
pull your battery out, leave for 5 mins, reinsert, and try getting into recovery with three button combo again
Click to expand...
Click to collapse
You think whatever the problem is i had to always be able to go to recovery mode ?
And thanks for for help !!!!!
You don't need the cm logo to show up when trying to get into download mode.
Press down home and power button. Connect to odin via usb, and flash the tar siyah kernel.
Sent from my GT-I9300 using xda premium
xcly said:
You don't need the cm logo to show up when trying to get into download mode.
Press down home and power button. Connect to odin via usb, and flash the tar siyah kernel.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I dont tell sothing aout cm logo ..i am telling about samsung logo ....a lot before cm logo.. I i am stack in SAMSUNG Glaxy s3 GT-I9300 logo
xcly said:
You don't need the cm logo to show up when trying to get into download mode.
Press down home and power button. Connect to odin via usb, and flash the tar siyah kernel.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks i got to download mode and now i flashed the correct kernel and all went good .
Thanks a lot guys !!!!!
Hello i have a problem i rooted flashed and installed my samsung galaxy s2 gt-i9100 with clockworkmod and ICS cyanogenmod but i had problems becouse the sim was not regonized meaning it had the sim simply showed no signal ,, i thought it was a problem of the rom and from rom manager downloaded and flashed a cyanogenmod 7 rom and when one since the phone did not start up it is in a boot loop and i can only access the download mode the phone is still roted becouse si rooted yeallow tiangle with a ! has not gone and when in download mode it reads ODIN on top..What should i do to restore proper funcion can anyone help pls
Thnx in advance
go into recovery mode and wipe data/factory reset
Also never use rom manager again. It doesn't work with the I9100.
Sent from my GT-I9100 using xda premium
HANDSY said:
Also never use rom manager again. It doesn't work with the I9100.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
+1
Sent from my Nexus 7 using xda premium
the problem is i cant go into recovery becouse when i boot up using power home and volume down it comes into download mode not in recovery mode
You should press Vol+ + Home + Power.
Try flashing the kernel(.tar) with odin you used in C7 and see if that lets you into recovery or boots up.
Or you may have to get a stock rom for your model/region etc off sammobile and flash with odin.
That rom manager once gave me 4 hours work on my x10i.....
Sent from my GT-I9100 using xda premium
Hi!
That happened to me once. I used odin to flash stock rom and solved the problem. Don't use rom manager... It only gives trouble.
Cheers!!
sorry to bother but how do i flash to stock rom??
gjergjisel said:
sorry to bother but how do i flash to stock rom??
Click to expand...
Click to collapse
Go to www.sammobile.com download a stock firmware, flash through Odin.
Sent from my Nexus 7 using xda premium
gjergjisel said:
the problem is i cant go into recovery becouse when i boot up using power home and volume down it comes into download mode not in recovery mode
Click to expand...
Click to collapse
Hi' you really shouldn't worry and try to avoid flashing stock rom. you flashed GB rom over ICS rom and the problem is your data is full of stuff that's preventing you from booting the rom. You're tryong to go into recovery the wrong way. Hold together voulme up (NOT down) + home + power and it should boot your recovery just fine. Then just wipe data. the rom should boot if it was installed. If not download another rom and flash it through recovery.
Cheers
gjergjisel said:
the problem is i cant go into recovery becouse when i boot up using power home and volume down it comes into download mode not in recovery mode
Click to expand...
Click to collapse
Recovery: Volume Up + Power + Home
Download Mode : Volume Down + Power + Home
kilometers4 said:
Go to www.sammobile.com download a stock firmware, flash through Odin.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
i dont quite get whitch rom i should download from sam mobile i got one for the GT-I9100 whitch was my model even thou it was writen GT-I91000 in samobile and there are 4 files in there plus 2 of the odin package ,, can someone please link me to some simple guide how do i flash this whith odin and whitch files to chose , i think as it is my phone needs to be reformated totally
thank you
gjergjisel said:
i dont quite get whitch rom i should download from sam mobile i got one for the GT-I9100 whitch was my model even thou it was writen GT-I91000 in samobile and there are 4 files in there plus 2 of the odin package ,, can someone please link me to some simple guide how do i flash this whith odin and whitch files to chose , i think as it is my phone needs to be reformated totally
thank you
Click to expand...
Click to collapse
plus i think i did something rom with the rom from sammobile and now i get the screen where it says firmware upgrade has encountered an issue please select recovery mode in kies & try again
is there some way to totally wipe the phone and make a new clean install ,,,
previously i had android 4.0.4 rom (flashed it using flash tools) and then i rooted and flashed experience v2 custom rom (using CWM)
now i ....... tried to flash Ginger Bread stock rom using flash tools and i dont know what went wrong but now when the process of flashing completed, i am stuck in this situation, the phone boots ,sony logo appears, few seconds, error / alert / warning (whatever) triangular icon with phone appears, fe more seconds, OFF.then the same process repeats again and again
i can only access flash mode
SpiderJockey said:
previously i had android 4.0.4 rom (flashed it using flash tools) and then i rooted and flashed experience v2 custom rom (using CWM)
now i ....... tried to flash Ginger Bread stock rom using flash tools and i dont know what went wrong but now when the process of flashing completed, i am stuck in this situation, the phone boots ,sony logo appears, few seconds, error / alert / warning (whatever) triangular icon with phone appears, fe more seconds, OFF.then the same process repeats again and again
i can only access flash mode
Click to expand...
Click to collapse
If you have a nandroid backup of your stock ROM then try restoring it.
Wipe cache and dalvik-cache and then try to boot
Sent from my Nexus 4 using xda app-developers app
bonpd19 said:
If you have a nandroid backup of your stock ROM then try restoring it.
Wipe cache and dalvik-cache and then try to boot
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
thank you for reply
like i said, i cannot access CWM
i can only go to flash mode
yes i have a backup but i cant use it without CWM
Maybe something's gone wrong with your recovery. did you try flashing recovery again.
Sent from my Nexus 4 using xda app-developers app
bonpd19 said:
Maybe something's gone wrong with your recovery. did you try flashing recovery again.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
i forgot to post that before flashing the gb rom, i formatted the phone (full format) on CWM and cleared the system cache
then i flashed the rom
now i have tried flashing both (andoid GB + ICS) but neither worked
(I can only access the flash mode with green light)
I FIXED IT
using sony update center, i locked my bootloader back , flashed the gb rom i had and updated it using the sony update service app
now its working fine
thank you for your time
I was flashed stock i9100XWLST JB 4.1.2 firmware on my sgs2 with Odin after flashing the firmware phone Start and stuck at boot logo. Bootlogo play repeatedly and my home button not working so I can't' go in recovery pls help. Sorry for bad english
Sent from my Micromax A092 using XDA Premium 4 mobile app
Rickydhillon said:
I was flashed stock i9100XWLST JB 4.1.2 firmware on my sgs2 with Odin after flashing the firmware phone Start and stuck at boot logo. Bootlogo play repeatedly and my home button not working so I can't' go in recovery pls help. Sorry for bad english
Sent from my Micromax A092 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well that's hard to get into recovery and download mode. I suggest using a USB jig to get into download mode and make the adjustments from there. You need to factory reset and delete cache from your phone to fix the bootloop issue in the recovery. You need to the flash a kernel newer than the current one e.g (Pedestre's apolo kernel newer than the 4.14 release like the 7.1 release ). Then your phone should reboot and you will notice it won't boot into the system, instead it should boot into the recovery where you should factory reset, wipe cache, then install the correct kernel (apolo kernel 4.14). So make sure to download one kernel for odin, and one kernel to put into your phones storage.
Thanks for reply.
I solve the issue i opened the screws and clean the device with petrol and after that home button working. I reboot in recovery and wipe data and cache and phone boot up.
Now i want to flash a cwm recovery which one is suitable for stock jb 4.1.2 firmware. Thanks
Sent from my Micromax A092 using XDA Premium 4 mobile app
Rickydhillon said:
Thanks for reply.
I solve the issue i opened the screws and clean the device with petrol and after that home button working. I reboot in recovery and wipe data and cache and phone boot up.
Now i want to flash a cwm recovery which one is suitable for stock jb 4.1.2 firmware. Thanks
Sent from my Micromax A092 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You should try installing a kernel which comes with cwm like dorimanx 8.43.