Hi guys
First of all thanks for a great forum..
Normally i'm a very glad HTC user, and never had those kind of troubles with them, as i have with a friends Razr.
He tried to root it with the one-click tool.. Batman.. "Droid RAZR Utility 1.7"
My first thought is that.. When it says "Droid" Razr, is that because it's only for the XT912, or?
Because when i look here:
sbf.droid- developers . org
For official roms for the phone, i can see this:
"Motorola Droid RAZR (XT912)"
"Motorola RAZR (XT910)"
We live in Denmark, so its some european ROM we need.
But it went wrong.. He rooted it, and then he saw that there was a OTA update to get ICS 4.04, so he wanted to un-root the device again, the get the OTA update... He unrooted the device again in SuperSU, and then tried to get the OTA update, but he couldnt.. So he downloaded the Droid Razr Utility 1.7, and choosed option 1: Prepare for side-load ICS 6.16.211 or any Gingerbread Version..
After that he got some fails.. I suspect him for not having the update zip file on the SD card after running option 1, but i really dont know.
He's new into rooting and flashing, and so am i, when it comes to Motorola..
I've made the programming cable myself, and i get a battery OK, and OK to program, and i got no troubles with finding the phone in AP Fastboot mode, running the fastboot-moto shell...
And i've even flashed a rom onto it, through RSD Lite v5.6, and it worked allmost as it should.. But it was like it couldnt find the radio or something, because the "Enter pin code" did not appear, and all i get is a message that says "Emergency calls only" on the device.
Could this be, because i havent flashed a proper stock rom?
If so, could anybody help me find the proper stock rom for flashing with RSD?
I'm thinking about going to the shop where he bought it, because they have a working demo-phone in the shop, and then lookup exactly what android version, baseband and so on, the model here in Denmark uses.
I am pretty stucked here, and i think that if i only knew what kind of stock rom i am supposed to go with, i can flash that through RSD, and then afterwards i can root it again and flash a custom rom..
But first i want to get a STOCK ROM onto it, and ive read A LOT on the forums.. I've used at least 15 hours to get this **** working, but its like running the head against a wall all the time..
Hope someone out there can give me some advices
What Rom you tried to flash? Can you give an Link?
I guess you flashed an CDMA Rom, but you got an GSM Device (CDMA is not used in EU)
Have you flashed an GB Rom or an ICS Rom?
I need some informations to get you out of trouble
Thank you for the fast reply
The rom he did try to flash was the "VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml", which he put on the SD card before using the Batman tool..
So you are correct, thats for the XT912, CDMA.....
The roms i have tried to flash now are all ICS, but i dont get the opportunity to type the pin code, and it keeps saying "Emergency calls only"..
I just tried to flash this rom:
Filename: SPDREM_U_01.6.7.2-180_SPU-19-TA-11.2_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot.xml
Creation Date: 06/09/2012 10:22:40
File size: 1504
Sofware Version: umts_spyder-user 4.0.4 6.7.2-180_SPU-19-TA-11.2 1339215326 release-keysSPYDERBP_U_04.10.00R
For Phone Model: SPYDER_U
And it worked, but still no antenna.. Then i flashed another radio in fastboot, but now it bootloops..
If you want to know more, let me know
And thank you the your time!
Ok, the Fastboot File you tried to flash is the right one.
So now let's see how we get this Phone back on Track.
First thing you should do now is to boot into Stock Recovery.
Use the Combination to get into AP Fastboot, when the Phone is off. But instead of AP you select Recovery. You will see an dead Android after an wihile > Press Vol+ & Vol- @ the same time and you're in the Recovery. There you wipe Data (Factory Reset) > Select with Vol Keys and accept with Power.
After you've done that flash the Fastboot again!
Download this Zip and put it on your external SD
http://crackflasher.com/dev/mattlgroff/Blur_Version.672.180.33.XT910.Retail.en.EU.zip
After the RSD flash is passed, boot into the Recovery again. There you select apply Update from external Storage > select the Blur_Version.672.180.33.XT910.Retail.en.EU.zip and wait till it's flashed correctly. After that reboot the Phone and tell me if it's working
Thank you for the answer, and i did exactly what you described..
I still dont got any network.. Shiiiiiit
I'm pretty lost here
That's strange, because the Radio get updated after the Update.zip.
Try that:
Type *#*#4636#*#* and hit the Phone Info.There you can change the Network type. Try to set it to GSM only.
IT WORKS LIKE A CHARM NOW!!
It was a problem with the simcard, so we changed it and it works..
Thank you so much for the advise about the update, i wouldnt have done that without you telling me
Star of the day, thats you!
Glad to hear it worked.
Now have fun with the ICS :good:
Related
After countless hours of research, I decided to unlock my bootloader and to root my Motorola Atrix 4G. With success, I was happy to have everything working and installed the Darkside Custom Rom. I let a friend borrow my phone, and they saw the AT&T system update and they decided to install it. They bring back the phone and the system update has finished and was installing. The phone powers off and starts to install the update. 10% into the install, it stops, and I got the little green droid man with the /!\ behind him. I take out my battery, place it back in after 30seconds. It powers on, boots up, powers off and tries to load the update again. I restart it, but this time quickly going into RomManager and starting it up in Recovery Mode. I go to restore the phone using the file I backed up from the TitaniumBackUp app, everything backs up except the system. I plug my phone into my laptop, and everything is in the folder. I performed a system/factory reset, downloaded the last Gingerbread update, but nothing helps. Anything I try to load it says "Installation aborted". No matter if it's the original update or a ROM I download. Looking up other forums, I notice others that have downloaded the Darkside ROM have had the same; if not similar issues. I apologize for the length of this message, but I wanted to put in as much detail as I could so you know exactly what the issue is. I look forward to hearing from someone, and thank you in advance!!!
You probably need to sbf it back to a stock ROM and start over. I had a similar problem when I first got my Atrix and the AT&T update first came out. I had already rooted it and didn't unlock the bootloader yet. It tried to update and bricked the phone. Got AT&T to give me another though as I had just got the thing.
nickdeal said:
You probably need to sbf it back to a stock ROM and start over. I had a similar problem when I first got my Atrix and the AT&T update first came out. I had already rooted it and didn't unlock the bootloader yet. It tried to update and bricked the phone. Got AT&T to give me another though as I had just got the thing.
Click to expand...
Click to collapse
Thanks a ton! How would I go about doing that?
You need to download motorola RSD app to you computer. Search XDA for stock firmwares and download one. You will then need to use the button combo to get in to RSD. Connect the phone to your computer and make sure it recognizes. I had an issue where one of my laptops would not recognize the phone for anything. I had to use a different laptop. Once it's done you should be back to stock. The bootloader should be unlocked still. Just root and flash your ROM of choice.
Sent from my MB860 using XDA App
I did a search and found nothing. It seems I installed a GSM rom that was said to be a CDMA (I am very careful when reading the detail of a ROM I am going to flash) but it seems that it was not a CDMA ROM. The thing is I have tried to restore my phone every way I know: Droid Razr Utility 1.42 and RSD lite. I have also tried to flash other 4 different "cdma" roms and they do nothing. All of them get stuck in the Welcome Screen (which I bypass with the four corners trick) and I get NO Service.
Does anyone know how to get back to the Stock Verizon CDMA / US version or however it is called that I cannot find it. I have been with 0 communication since yesterday.
Thanks for your help
Yeah but can you use safe strap or get into any other mode? If you can get into fastboot mode then you should be able to use rsd lite. Im using it now. Boy have I been through alot of crap flashing , back to stock etc.. Takes some time but usually works out.
Did you make a backup? I'm guessing no :/
Maybe try flashing this:
http://www.droidrzr.com/index.php/topic/879-rom-totally-stock-rooted-173-flashable-in-bootstrap/
As long as you can boot into safestrap/recovery then you should be ok. Just make sure you fully wipe everything (except your SD card!) before flashing a new ROM.
POQbum said:
Just make sure you fully wipe everything (except your SD card!) before flashing a new ROM.
Click to expand...
Click to collapse
Including a format/SYSTEM?
Edit: I formatted "everything" except SDCARD as directed and now the phone doesn't boot in anything but Fastboot. :/ Now what?
Maybe from fastboot use rsd lite to restore to orignal rom. Use matts to help.
That's the thing; I don't find the original ROM for this. Have looked everywhere except where probably someone would direct me to download it.
Members
2 posts
Posted Today, 02:13 AM
Hi there....i recently purchased a Razr and had many problems gaining root and flashing ROMS. It took me over 3 days to figure out, and i just want to post my experiences and advise people who may be struggling. I have a XT 910 model GSM as i live in UK. I originally rooted using Doomlord V2 Zergrush and that worked fine while i was on GB 2.3.5. I had an OTA update to 2.3.6 and i lost root. Zergrush didn't work on my model again, so i had to use motofail which worked perfectly.
When installing recovery, i installed safestrap first. I could enter CWR on reboot, but ROMS would not install. I would get a black screen, and then i would have to do a hard reset to get my phone working again. I would still be in stock. The reason for this is because safestrap isnt working on GSM phones. (International models, well some of them!) Safestrap works on CDMA models such as in USA. The reason for this is because the system partition on EU GSM models(XT910) is smaller than the partition on CDMA USA models (XT912). So, we have no choice but to use bootstrap.
If you installed safestrap and experienced these problems, make sure you boot into CWR, advanced, mounts and storage, and format system. Then uninstall. If you install bootstrap without doing this, you wont be able to enter CWR in bootstrap. You will end up stuck at the motorola splash screen and will have to hard reset everytime. You will not get any further.
If you uninstalled safestrap without doing this, reinstall it, and do this, then uninstall recovery from the app and make sure you completely remove it from the device system. Then install bootstrap.
There will be an additional file you will need to save to your SD card named RAZR-CWMonboot-Global-J.Y.Daddy.zip. Select bootstrap recovery and "success" should appear. Then, select reboot recovery, and hopefully, you should enter CWR mode on reboot. Make sure you install RAZR-CWMonboot-Global-J.Y.Daddy.zip file from your SD card. Everytime you flash a file ALWAYS flash this file before rebooting. Everytime you flash a file you are writing over you system, so it is important you do this or you wont be able to enter CWR if you ever get a bootloop or stuck etc....
Once you have flashed the ROM of your choice, and rebooted ,go into your Superuser app and toggle bootstrap into denied. There's a face at the bottom of Superuser app....make sure bootstrap is denied. Thats it!
This is what worked for me...UK model XT910 on O2 network. I'm by no means an expert, but i have worked on a couple phones. Motorola Atrix was my last one, so i have a bit of an idea. If i can help...please message me and i'm more than willing if i can. I dont have links to these files but you can google them. I had so many problems, but hopefully my post will help someone. If so, please "like".
Nice write up to help. One suggestion dont take this wrong but maybe separate into paragraphs. I had a hard time reading line by line.
Thanks. I will write paragraphs next time! I will bear that in mind. Sorry if anyone is struggling to read this line by line.
Droid
I'm new registered here in this forum, but i always read forums here, i own Droid Razr XT910, i rooted it following the instructions here, i install CMW, but i have a problem which is so annoying, everytime i power off my phone it always starts with CMW Recovery, it just will start normally after i reboot my phone i Recovery. Can you help me how to get rid of that..thanks a lot.
Sendoh28 said:
I'm new registered here in this forum, but i always read forums here, i own Droid Razr XT910, i rooted it following the instructions here, i install CMW, but i have a problem which is so annoying, everytime i power off my phone it always starts with CMW Recovery, it just will start normally after i reboot my phone i Recovery. Can you help me how to get rid of that..thanks a lot.
Click to expand...
Click to collapse
It's not annoying thing, but it's a feature thing. It useful when your RAZR got problem & cant boot to home screen. You can flash sbf or wipe from CWM Recovery
mgf8384 said:
Members
2 posts
Posted Today, 02:13 AM
Hi there....i recently purchased a Razr and had many problems gaining root and flashing ROMS. It took me over 3 days to figure out, and i just want to post my experiences and advise people who may be struggling. I have a XT 910 model GSM as i live in UK. I originally rooted using Doomlord V2 Zergrush and that worked fine while i was on GB 2.3.5. I had an OTA update to 2.3.6 and i lost root. Zergrush didn't work on my model again, so i had to use motofail which worked perfectly. When installing recovery, i installed safestrap first. I could enter CWR on reboot, but ROMS would not install. I would get a black screen, and then i would have to do a hard reset to get my phone working again. I would still be in stock. The reason for this is because safestrap isnt working on GSM phones. (International models, well some of them!) Safestrap works on CDMA models such as in USA. The reason for this is because the system partition on EU GSM models(XT910) is smaller than the partition on CDMA USA models (XT912). So, we have no choice but to use bootstrap. If you installed safestrap and experienced these problems, make sure you boot into CWR, advanced, mounts and storage, and format system. Then uninstall. If you install bootstrap without doing this, you wont be able to enter CWR in bootstrap. You will end up stuck at the motorola splash screen and will have to hard reset everytime. You will not get any further. If you uninstalled safestrap without doing this, reinstall it, and do this, then uninstall recovery from the app and make sure you completely remove it from the device system. Then install bootstrap. There will be an additional file you will need to save to your SD card named RAZR-CWMonboot-Global-J.Y.Daddy.zip. Select bootstrap recovery and "success" should appear. Then, select reboot recovery, and hopefully, you should enter CWR mode on reboot. Make sure you install RAZR-CWMonboot-Global-J.Y.Daddy.zip file from your SD card. Everytime you flash a file ALWAYS flash this file before rebooting. Everytime you flash a file you are writing over you system, so it is important you do this or you wont be able to enter CWR if you ever get a bootloop or stuck etc.... Once you have flashed the ROM of your choice, and rebooted ,go into your Superuser app and toggle bootstrap into denied. There's a face at the bottom of Superuser app....make sure bootstrap is denied. Thats it! This is what worked for me...UK model XT910 on O2 network. I'm by no means an expert, but i have worked on a couple phones. Motorola Atrix was my last one, so i have a bit of an idea. If i can help...please message me and i'm more than willing if i can. I dont have links to these files but you can google them. I had so many problems, but hopefully my post will help someone. If so, please "like".
Click to expand...
Click to collapse
thank u so much!
I've been struggling with this all day, many thanks for the advice! Can't believe it was that simple..
CWM and Stock Recovery
Please could some tell me if on my GSM Razr I update it with
Retail.en.EU ICS Leak 672.180.33 thru Stock Recovery, and afterwards I decide to flash J Y Daddy's CWM, would I now have access to both CWM as well as Stock Recovery? Or does it wipe Stock Recovery if CWM gets installed? thx
THANK YOU!
You are a Fuc*ing master man
No one could help me with my problem, but that solved it.
I'd installed safestrap when I bought the RAZR 7 Months ago and I didn't had a clue that the problem was there.
Did exactly what you wrote and now I can use CWM again with BootMenu Manager
THANKS
Great post mate, I like you, lost root and never got it back so stopped trying. There are so many versions of the phone out there, its really confusing which method, files etc to use for UK phone
I rooted my old htc desire and jumped between roms all the time and loved being able to do that, but the razr, I have tried a leak or a custom rom yet
Thanks Again
P.S. as for the comment on paragraphs that's been made, maybe you could edit your post to sort into these, this will then help everyone even more.
Sent from my XT910 using xda app-developers app
MylleZ said:
You are a Fuc*ing master man
No one could help me with my problem, but that solved it.
I'd installed safestrap when I bought the RAZR 7 Months ago and I didn't had a clue that the problem was there.
Did exactly what you wrote and now I can use CWM again with BootMenu Manager
THANKS
Click to expand...
Click to collapse
Glad it worked!!!
geemacd said:
Great post mate, I like you, lost root and never got it back so stopped trying. There are so many versions of the phone out there, its really confusing which method, files etc to use for UK phone
I rooted my old htc desire and jumped between roms all the time and loved being able to do that, but the razr, I have tried a leak or a custom rom yet
Thanks Again
P.S. as for the comment on paragraphs that's been made, maybe you could edit your post to sort into these, this will then help everyone even more.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
i'll edit it in a few. Thanks for the feedback and glad it worked!
IMPORTANT: This guide is for users with a Motorola Photon 4G (MB855) running the 2.3.5 OTA update only. For the lucky ones still running 2.3.4, you want this thread. For those of you who don’t know what version of Android you are running, DO NOT try this. Please read these forums carefully and learn everything you can before attempting this.
This guide is based on the work of halfevildruid and his thread for unlocking GSM for Photon users on 2.3.4 with unlocked bootloaders. All users should take the time to carefully read through that thread here and keep in mind that it was written for 2.3.4/unlocked bootloader users. Some files and steps in that thread will not work on Photons that have had the 2.3.5 OTA applied.
Unlocking US GSM Carriers on 2.3.5 OTA
Before You Start:
Doing this will remove the domestic GSM carrier lock on the Sprint Photon running 2.3.5 OTA. This process will most likely break your ability to return to Sprint service, so please DO NOT DO THIS if you want to keep your Photon running on Sprint. There are ways to fix this, but none have been tested on 2.3.5 OTA devices. As far as I know, this method has been confirmed to work on three phones (including mine), so consider this experimental and high risk. I am not responsible for bricked phones, warranty issues, cats chasing dogs or hot snow falling up if you try this.
Things You Need:
1.Windows PC (tested on Win 8) with the following software installed:
-Motorola USB Drivers [Download]-RSD Lite [Download]-ADB Tools/Android SDK [Download] (Not really necessary, but helpful if you have USB issues.)2. Micro USB cable and wall charger (needed for bootstrap recovery)
3. Standard (full size) SIM card for US GSM network. (ATT/T-Mobile/Straight Talk)
4. Micro SD card (not necessary, but good just in case)
5. Motorola Photon running 2.3.5 OTA ONLY
Files You Need:
1.Full US Cellular Electrify SBF [Download]
-1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US.sbf2. Unbrick SBF [Download]
- 2.3.5_45.4.13ota_unbrick.sbf3. Electrify/Photon (almost) One Click Root [Download]
-su.zip4. Bootstrap Recovery [Download]
-MOTODX2_Bootstrap_signed.apk5. Peetr’s Hybrid Locked 2.3.5 ROM [Dev Thread/Download]
-HybridGBv20locked.zip6. KDDI Radio [Download]
- KDDI_Radio_udate.zip
If any links do not work, most can be found at www.motosunfire.com.
Steps
1. Backup Your Stuff!
2. Shutdown phone and remove SIM/SD card (if applicable)
-Tip: Leave your battery cover off. There’s going to be a lot of battery pulls…3. Open RSD Lite on your computer.
4. Start phone in RSD mode:
-With phone unplugged hold volume-down and power
-It should say fastboot in the top left corner, press volume-down until RSD appears
-Connect phone to computer
-Press volume-up to enter RSD mode5. Select the full US Celluar SBF in RSD lite and press start.
-This process takes a few minutes and will end in an error, this is normal.
-The phone may hang on the dual core screen, if so pull the battery.
-The phone will either do two things:
-Bootloop with the US cellular logo
-Boot normally to home screen-In either case, pull the battery and follow the steps to enter RSD mode again.6. Once you are in RSD mode again, flash the Unbrick SBF
-This should not end in an error, but RSD may say you need to manually reboot your phone, this is normal.
-Once your phone reboots you may experience bootlooping, if so do a factory reset (See below)
-With the phone off pess vol-down + power
-Press vol-down until Android Recovery is shown, press vol-up to enter.
-Press both vol-up + vol-down to see menu.
-In the recovery screen, use the volume buttons to scroll and select factory restore.
-Press power to wipe the phone.
-When complete, reboot phone and you should successfully boot to home.7. Once you have flashed the two SBFs, you should be able to get to the stock US Celluar rom.
8. After everything has loaded, you need to obtain root access. (See below)
-Make sure all USB drivers are installed on your computer.
-Enable USB debugging mode on phone (System>Applications>Development)
-Unzip the su.zip on your computer and open root.bat, the program will take you through the rest.9. Once rooted, place the KDDI zip and Peetr’s ROM on either the internal or external storage.
-This is also a good time to install your SIM card.10. Install the Bootstrap recovery and follow the instructions to boot into recovery.
-Remember: You need to be on AC power to get into Bootstrap recovery.11. In recovery, flash the KDDI zip and then Peetr’s ROM
12. After installing the ROM, flash KDDI again.
-Flash KDDI as many times as you want, it will give an error but will still work.13. Reboot phone and enjoy the GSM radio.:highfive:
-If you bootloop again, just do another factory reset. Peetr’s ROM will still be there.
-You may have to root and install Bootstrap again.
-It never hurts to flash KDDI one more time just to be sure.
See next post for Q&A
Q&A
When You’re Done:
Q: How can I go back to Sprint?
A: The only way that worked for me was by flashing 2.3.5. Photon 4.5.1A-1_SUN-254_13 from this thread. This will take the phone back to mostly stock, but there may be residual radio issues.
Q: What carriers can I use now?
A: Any GSM carrier that uses a standard SIM card. These include:
-ATT (3G)
-T-Mobile (2G/EDGE unless you live in a re-farmed area.)
-Straight Talk (3G w/ATT SIM, 2G w/T-Mobile SIM)
Q: Can I unlock my bootloader now?
A: Nope. This only unlocks the GSM radio.
Q: Can I install a different ROM than Peetr’s hybrid?
A: SIM unlocking has only been confirmed to work on Peetr’s locked hybrid rom.
Q: I’m pissed at Motorola for canceling the ICS upgrade. How can I sleep at night?
A: As of right now (and probably forever) there is no way to install any version of Android higher than 2.3.5 on any Photon with the 2.3.5 OTA. However, Peetr’s ROM can be modified to make it look and function like ICS. Planters76 has made an excellent theme for the hybrid ROM that can be flashed in Bootstrap. It can be found here.
Once you flash that theme there are several applications on the Play Store that replicate the ICS/JB experience. Developer Moblynx offers replacements for the clock, camera and gallery. Mobint Software makes home and lockscreen replacements as well. I’m not affiliated with these developers, but their work is solid. This is as close as were going to get to ICS on 2.3.5.
Q: Which developers contributed to this?
A: halfevildruid, mof9336, peetr_, Noncs, Lightsword1942, Planters76, and many others. If anyone else would like to be mentioned, let me know and I’ll add you in. Without these developers we’d be left out in the cold, so give them some thanks.
Q: Who are you and what are you doing here?
A: I am not a developer myself, so just think of me as the person gathering all of the information and trying to simplify it. I can’t stand planned obsolescence, so the Photon is a sore point for me. I’ve stayed in the shadows before now because I haven’t had a reason to speak up, but the locked down OTA and cancelled ICS update bugged the hell out of me. I was in the first soak test for the 2.3.5 OTA, so I had no warning that Motorola was about to screw me and many others. If I can help anyone else that was locked down eek any more life from their phones, then I’ve done my job.
Q: I’m lost! Can you help?
A: Just reply with your questions and I’ll try my best. Keep in mind that I am not a developer, so there are some questions I may not have an answer to.
Finally, if anyone finds any incorrect information in my post or some other error, please let me know so I can fix it. I’d like to prevent any unnecessary phone damage if possible.
Works great. thanks.
now 3G shows 4 bars instead of 1 earlier.
I had to use libmoto_198_7
peetr's ROM is cool. and I like the keyboard!
great work.
Works, but WIFI shows error
I followed the steps and I have my Sprint Photon working in AT&T. But the issues is, the Wifi shows error and doesnt start at all. is there something that can be fixed. Also, How can I get my Google Play up and running. The market icon in the stock Peeters ROM doesnt seem to work and time and again just goes to a browser Window.
Thanks a lot for compiling the steps here...
The combination of a WiFi and apk error makes me think that the ROM needs to be flashed again. Also try downloading a new copy of the zip in case the first one was corrupted. If that doesn't fix it, there was another zip floating around the dev forums that fixed WiFi and MMS issues on the USC ROMs. The file is USCMMSWIFI.zip, I just don't know exactly where it is. As for Play store issues, look around for a recent copy of vending.apk or a flashable zip version and install it manually.
Sent from my MB855 using xda app-developers app
flashing 2.3.5_45.4.13ota_unbrick.sbf at the end fixes wifi issues.
Thanks portman and makakalo. I will do the same. I found the USCMMSWIFI.zip, but it is not in a SBF fashion. Any steps that I could follow to include this fix would help me. Thanks again and Merry Christmas!!
Reflashing Peetr's ROM didnt help with Wifi
I reflashed Peetr's ROM, but still stuck with WiFi Error...Installed USCMMSWIFI.zip using Bootstrap Receovery Mode and the installation completed. Yet, Wifi Error is persistent and cant use Wifi
If you haven't already done so, do what portman suggested and flash the unbrick sbf again. If that still doesn't fix it the only other thing I can think of is going back to stock and redoing the entire process. You may need the 254_12 radio sbf and libmoto zip as well as the 254_13 modules zip to completely reset. Those files are in the 2.3.5 sv2 unbrick thread in the dev forum.
Sent from my MB855 using xda app-developers app
Dear all
Thanks..Got it working. Realized that there was some issue in the Peetr's zip file downloaded. Went through the process meticulously after redownloading and got my phone working in an amazing manner!! Thanks a lot to all.
regards
Ram
Thanks for putting this together, I am still waiting on my SIM, should be in the mail today.
Just one question on the root method..does it really mater which root method I use?
The last time I rooted this phone I used torpedo direct v1.1
I seem to be stuck in the unbrick sbf??
Manually powered up my phone a couple of times.
Never mind stuck in bootloop...DOH!
Wipe data/cache
Sent from my MB855 using xda app-developers app
Something strange
I was stuck in a bootloop after flashing the Hybrid ROM/kddi and I could not even get to bootstrap soo, I went back to the beginning and after the first SBF step the phone starts normally and my baseband is N_02.29.04P.
Now I have a US cellular phone with a GSM radio:silly:
The phone is not rooted at this time nor did I run the unbrick sbf.
I am tempted to use it like this to see if I can activate it on my carrier...heh why not.
Update:So what does the unbrick do? Do I need to run it?
wifi works now and it did not work before the phone seems fine, still want to root and load bootstrap though.
My carrier cannot activate me until after the holiday, but the phone shows me on the Tmo network.
After flashing the unbrick sbf, my phone is probably bricked as it is now stuck on : Failed to boot 4, starting RSD mode
Any idea how to recover ?
Thanks !
portman said:
Wipe data/cache
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
As many times as I have done this you would think I would remember that, but no.
After wipe data/cache I got the hybrid rom to load and ran fine except I could not get the radio to work??
Tried rebooting several times, reinstalling kddi several times, but no go.
Fortunately I made a backup, so went back to USCell ROM and the radio was back
khatta said:
After flashing the unbrick sbf, my phone is probably bricked as it is now stuck on : Failed to boot 4, starting RSD mode
Any idea how to recover ?
Thanks !
Click to expand...
Click to collapse
The failed to boot 4 means there's a problem with that partition meaning, whether its corrupt or not there, it just won't boot and will relay that if to you.
To recover, I'd imagine that you need to try the steps over after wiping your data/cache but to make sure that the phone boots after flashing a full sbf.
http://forum.xda-developers.com/showthread.php?t=1759997 (This has lots of info on the sbfing you are doing)
Sent from my sunfire using xda premium
you need to flash anyone of the following using bootstrap recovery
198_7 radio sbf ----- 198_7 libmoto_ril.so
254_12 radio sbf ----- 254_12 libmoto_ril.so
(thanks to Peetr_)
in my case 198_7 radio sbf ----- 198_7 libmoto_ril.so did the trick even when my phone had a locked bootloader.
after this flash KDDI radio
DXM31 said:
As many times as I have done this you would think I would remember that, but no.
After wipe data/cache I got the hybrid rom to load and ran fine except I could not get the radio to work??
Tried rebooting several times, reinstalling kddi several times, but no go.
Fortunately I made a backup, so went back to USCell ROM and the radio was back
Click to expand...
Click to collapse
portman said:
you need to flash anyone of the following using bootstrap recovery
198_7 radio sbf ----- 198_7 libmoto_ril.so
254_12 radio sbf ----- 254_12 libmoto_ril.so
(thanks to Peetr_)
in my case 198_7 radio sbf ----- 198_7 libmoto_ril.so did the trick even when my phone had a locked bootloader.
after this flash KDDI radio
Click to expand...
Click to collapse
I flashed the 254 before and it was a no go for the radio.
I just did a backup and just to be clear on what I need to do:
wipe data/cache/dalvik
flash hybrid ROM
flash 198_7
flash 254_12
flash radio
and I should be golden, correct?
thanks
as a side note:
the phone is currently working great with the usc rom except the network shows T-Mobil the 'e' gets loped off and I have not actually activated the phone yet because my carrier was closed yesterday(wonder why) they said after Wednesday I should get an email.
DXM31 said:
As a side note:
the phone is currently working great with the usc rom except the network shows T-Mobil the 'e' gets loped off and I have not actually activated the phone yet because my carrier was closed yesterday(wonder why) they said after Wednesday I should get an email.
Click to expand...
Click to collapse
Thank God, I thought I was the only one with the T-mobil issue. It happens on every ROM. I noticed if I dial *#*#4636#*#* and go to phone info, it sticks the e on the end for a little while but other than that, I randomly have it.
PLEASE.
I have found lots of threads on this topic and nothing is working for me.
-I unlocked bootloader.
-Flashed Android revolution ROM
>WiFi stopped working..A device doesn't even show up to try and select just a blank menu (should be several routers showing)
-I have since tried using CyogenMod menu to do factory wipe/cache wipe then installed a new rom
- I have tried installing JmzStockATTOneDeodex, and RageOneV.1.1.0 after doing factory wipe/cache wipe
- I then found "RUU_Puccini_LTE_Rogers_WWE_1.26.631.4_Radio_1.05.550I.09v2_30.68.550I.12_release_219377_signed"
but this file doesnt seem to open at all it is a exe... and now .......I now am starting to lose my mind
PLEASEEEE HELP!
I am on Rogers LTE Network, HTC One, Canada.
I would really like to be able to flash the RageOne and have wifi work, PLEASE!!!!
millarrjm said:
please.
I have found lots of threads on this topic and nothing is working for me.
-i unlocked bootloader.
-flashed android revolution rom
>wifi stopped working..a device doesn't even show up to try and select just a blank menu (should be several routers showing)
-i have since tried using cyogenmod menu to do factory wipe/cache wipe then installed a new rom
- i have tried installing jmzstockattonedeodex, and rageonev.1.1.0 after doing factory wipe/cache wipe
- i then found "ruu_puccini_lte_rogers_wwe_1.26.631.4_radio_1.05.550i.09v2_30.68.550i.12_release_219377_signed"
but this file doesnt seem to open at all it is a exe... And now .......i now am starting to lose my mind
pleaseeee help!
I am on rogers lte network, htc one, canada.
I would really like to be able to flash the rageone and have wifi work, please!!!!
Click to expand...
Click to collapse
****. Now my ****ing internet wont work either **** me.
Please i need help asap!!! Someone pleaseeeeeeee
i cant believe i even tried this **** with my new device
i just want to go back to factory rogers setting for canada when my wifi and internet would work **** **** **** ****f uck :"(
Calm down. You found the solution yourself. That exe file is the ruu. Relock the bootloader put the phone in fast boot. Then run the program on your computer
gunnyman said:
Calm down. You found the solution yourself. That exe file is the ruu. Relock the bootloader put the phone in fast boot. Then run the program on your computer
Click to expand...
Click to collapse
So it didn't work..Also it said I have version 1.29.631.4 and this is 1.26.631.4 .. wouldn't I want the newer one? I never used a rom exe like this.. only flashed different rom zips from here.. the 3 available.
Also I am not posistive I MIGHT have used a "flash kernal" on one of the rom zips the android revolution one the very first time I installed it...
using "One_M7_All-In-One_Kit_v1.0" that is available here on at&t htc one part of forum. Then I kept reading and flashed it using recovery mode... and the rom worked well everything was fine except wifi... then today I flashed the others like I explained before trying to fix wifi and now the internet won't work as well. but the rest of the phone functions as it should and my carrier network works fine i can txt / call .
I follow your steps and it said this when I ran the exe..
ERROR[132]:SIGNATURE ERROR
The ROM Update Utility cannot update your android phone.
Please get the correct ROM update utility and try again.
--- Sorry this is kind of long, I just want to explain best for anyone reading this including yourself to understand what idiot things I did to bring myself to this conclusion, I am new to the community and a android noob
I have the same problem too,my HTC One wifi keep saying turning on and then error after root, i tried using the wifi tether app but its not working, any one can help please?
I've re-read your OP and you don't have the correct RUU for your device. You have an M7 not a Puccini, anyway like the At&T model a RUU for rogers doesn't exist yet.
As for fixing your wifi, your best hope is to restore your nandroid backup (I hope you made one) or find a Nandroid for your device. I know there's a thread over on the International forums with Nandroids in it, maybe find it there or make a request there.