Odin - flashing whilst device is booted? - Galaxy S II Q&A, Help & Troubleshooting

If I open Odin with my device plugged in, the yellow box appears and all as if I were in Download Mode.
Just interested - would it actually be possible to do flashes from here?
Too scared to try myself - I've already hard-bricked my phone once because of a corrupt ROM.

epic118 said:
If I open Odin with my device plugged in, the yellow box appears and all as if I were in Download Mode.
Just interested - would it actually be possible to do flashes from here?
Too scared to try myself - I've already hard-bricked my phone once because of a corrupt ROM.
Click to expand...
Click to collapse
No. You must boot into download mode.
Sent from my GT-I9100 using xda app-developers app

If i remember it correctly, it will stuck at setup connection.

Trying to flash a ROM while the device is booted will be about as successful as trying to perform a triple bypass on yourself. You must be in download mode to use Odin because the ROM cannot be loaded and replaced simultaneously.

epic118 said:
If I open Odin with my device plugged in, the yellow box appears and all as if I were in Download Mode.
Just interested - would it actually be possible to do flashes from here?
Too scared to try myself - I've already hard-bricked my phone once because of a corrupt ROM.
Click to expand...
Click to collapse
I doubt you bricked your phone unless it had to get repaired via JTAG or mobo replaced. There is no such thing as a soft/hard brick no matter what anybody on here tells you, your device is either "bricked" or it isnt. You more then likely just did bad flash and couldn't work out how to re-flash correctly, its extremly common for newbies to "think" they have bricked tehir phone when in fact all they have done is screw system up.
Anyway to answer your question no you cant flash rom over current rom while the current rom is already loaded/booted, thats just common sense and a bit of a silly question really.
However there is a mobile version of ODIN called "Mobile Odin" which is available from market which will enable you to flash files like Odin does but via your phone. You load the program up choose files and it reboots into its own recovery and flashed that way.
Mobile Odin is available in Google Play.

NO,you hv to boot in to download mode first

TheATHEiST said:
I doubt you bricked your phone unless it had to get repaired via JTAG or mobo replaced. There is no such thing as a soft/hard brick no matter what anybody on here tells you, your device is either "bricked" or it isnt. You more then likely just did bad flash and couldn't work out how to re-flash correctly, its extremly common for newbies to "think" they have bricked tehir phone when in fact all they have done is screw system up.
Anyway to answer your question no you cant flash rom over current rom while the current rom is already loaded/booted, thats just common sense and a bit of a silly question really.
However there is a mobile version of ODIN called "Mobile Odin" which is available from market which will enable you to flash files like Odin does but via your phone. You load the program up choose files and it reboots into its own recovery and flashed that way.
Mobile Odin is available in Google Play.
Click to expand...
Click to collapse
I know about Mobile Odin - the only reason I asked was because I was intrigued. I thought clicking Start would reboot in Download Mode and do the flash, but obviously not
I did brick my phone (it would not boot up, only got a little hot, jig didn't work, three button combo didn't work) so I sent it off to Samsung and they repaired it.

Related

[URGENT] Odin Crashed Whilst Flashing.

Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?

[Q] HOW to restore phone from unsuccessful flash?

Hi All,
I tried to flash my friends i9100 (it had arabic 2.3.4 firmware, but i didn't write down the exact firmware number), to I9100JPKI1 2.3.5 1 file update. But it gave "FAIL" result in ODIN. After that phone got stuck on Download screen. I removed battery and restarted the phone. And after it got stuck on the following screen (pic at the end of post)
I tried to flash it again by odin but it's not flashing (Attached pic of ODIN after unsuccessful flash below). Any ideas how to restore the phone?
it seems connectivity problem. Have you tried another USB or another USB cable?
Yes, tried different cables on different computers. The phone is booting with this phone-warning triangle-computer logo immediately. Even samsung logo is not coming before it.
Are you able to access recovery mode? If yes, try to do a full wipe.
EDIT: Try to Kill all process of Kies, and see if Odin recognize your phone
No, it's stuck on this screen. i can't put it in Download mode. Even if i start it: Volume Down+Home+Power this screen is coming.
ODIN can't recognize the phone.
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
limon11 said:
Yes, tried different cables on different computers. The phone is booting with this phone-warning triangle-computer logo immediately. Even samsung logo is not coming before it.
Click to expand...
Click to collapse
Maybe some file are corrupted. Try to follow these steps:
[READ THIS] Got a Boot Loop? Don't post a New Thread!
[ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download
meranto said:
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
Click to expand...
Click to collapse
On the first flashing (after which it became like this) i didn't do repartitioning and didn't use PIT file. Just selected PDA file.
meranto said:
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
Click to expand...
Click to collapse
I didn't see that...maybe only service center can do this job
I tried to follow following guide: http://forum.xda-developers.com/showthread.php?t=1108499.
Did
1) Turn off your phone. Unplug it from your computer etc
2) Hold down home, power, and volume UP. This will enter recovery mode. If you are using CF-Root, you'll get CWM recovery. If not, you get stock recovery. It doesn't matter which appears.
BUT phone is not going into recovery mode.
limon11 said:
I tried to follow following guide: http://forum.xda-developers.com/showthread.php?t=1108499.
Did
1) Turn off your phone. Unplug it from your computer etc
2) Hold down home, power, and volume UP. This will enter recovery mode. If you are using CF-Root, you'll get CWM recovery. If not, you get stock recovery. It doesn't matter which appears.
BUT phone is not going into recovery mode.
Click to expand...
Click to collapse
I think that you need to leave the phone to Service Center.
The thing is that the phone was bought in another country, so there is no warranty in my country for it. That's why i'm searching for solution myself.
limon11 said:
The thing is that the phone was bought in another country, so there is no warranty in my country for it. That's why i'm searching for solution myself.
Click to expand...
Click to collapse
I had a problem weeks ago with my phone too. Tried a lot of things and nothing fix the problem. But when i was losing hope, i found the solution by myself.
My problem was only IMEI number and i recovered it. I think that your best choice is read a lot before take some decision. And the most recommended choice is leave the phone to Service center.
Good luck!
Maybe JIG will be useful to put the phone into DOWNLOAD mode?
P.S. : I am keeping going to Service Centre options as a last resort.
If there is any way to get Odin to recognize your phone there is still hope. Try to get into download mode in all possible ways, sometimes it seems lost but suddenly you get in. Make sure Kies is not running in the background.
If you cannot get into download mode, even with a jig, and Odin never recognizes the phone, it is a job for service centre or JTAG or something, but not yourself.
limon11 said:
Maybe JIG will be useful to put the phone into DOWNLOAD mode?
P.S. : I am keeping going to Service Centre options as a last resort.
Click to expand...
Click to collapse
JIG maybe work
OK. I made very big mistake in the begining. the phone model was i9100g and i flashed it with i9100 firmware. that's seems the cause of the hang.
limon11 said:
OK. I made very big mistake in the begining. the phone model was i9100g and i flashed it with i9100 firmware. that's seems the cause of the hang.
Click to expand...
Click to collapse
That messed up your phone dude.. Can you still put your phone into download mode?
Sent from my GT-I9100 using xda premium
Finally, Alhamdulillah, i solved my problem of i9100g flashed with i9100 firmware. First to go out from "phone - yellow label - computer" mark i flashed it with i9100g original kernel Kernel_I9100GDZKI1 from http://forum.xda-developers.com/showthread.php?t=1276105&page=3. after that it became possible to put the phone into download mode. after that i flashed it with ODIN USING PIT FILE FOR OMAP4 from the same forum and with i9100G new firmware. and that's all, phone is working again.

[Q] Stuck in Odin mode "Could not do normal boot."

I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Do you have the correct drivers installed? Does adb recognize the device? You're in Odin mode when you try to use Odin to push something? I believe with ME7 you can Odin back to the official stuff.
Sent from my SCH-I545 using Tapatalk 4
TheColdOne said:
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Click to expand...
Click to collapse
You need to make sure you have the drivers for the phone and have a solid USB connection (I prefer the rear of a tower)
sent from my GE gs4
I ended up getting it to work. I had to go here:
http://www.intel.com/support/chipsets/inf/sb/CS-013541.htm
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
I hate to hijack a thread but I'm stuck here. My GS 4 (Vzw) was supposedly successfully rooted using TWRP, but now I have no way to enter any sort of recovery. The package I downloaded for the root does not have an Odin version to run. I've been getting the endless prompts to install the 4.3 update but there is no way to do this on my phone. I get the same "Could not do normal boot. Odin mode. Write protection enabled" message with the downloading screen. I try to boot into recovery via CWM or Goomanager but it always goes to the same screen. I can't make any backups or restore now either or I would just do a factory reset. Any ideas? I'm on VRUAME7.
Um.... there's no recovery available with ME7.... are you on the MDK bootloader?
Sent from your mom's smartphone
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
BoltsRUs said:
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
Click to expand...
Click to collapse
You're said that you're on ME7 - what you need to do is to flash the "No wipe" ME7 ROM onto your phone. It's in the Development forum.
http://forum.xda-developers.com/showthread.php?t=2301259
You've got to update to MI1 before you can install the 4.3 update (MJ7).
ONLY flash files intended for whatever release you're running. You can't mix and match, can't go backwards, and can't skip updates.
Theres also an ml1 factory image in the dev section.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
TheColdOne said:
I ended up getting it to work. I had to go here:
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
Click to expand...
Click to collapse
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
nyankat said:
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
Click to expand...
Click to collapse
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
TheColdOne said:
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
Click to expand...
Click to collapse
Thanks! Finally Oden recognizes my phone
my amazing method
the same problem was with me 3-4 weeks ago...
follow the url-
dbloo dbloo dbloo dot autoroot dot chainfire dot eu
(i cant post the URL because the website is not allowing me.....understand and use the code)
1) choose your samsung model and download the recovery file
2) download and open odin on a dekstop
3) connect your device to the dekstop
4) press the volume down, home button and power button together till the screen changes
5) press the volume down button again
6) odin will show the message "attatched or connected"
7) click pda
8) attatch the file you downloaded
9) your device will be fixed and will be restarted
ur welcome
hai i am stuck at download mode with message as could not normal boot how to fix it

[Q] Help needed for "???" (Hard or soft - don't know) bricked 9100g

Hello all!
Yesterday I started to 1st time flash my 9100g to presumably "original" firmware (I9100GXXLSR_I9100GXXLSP_I9100GDBTLS1_HOME.tar) with the before mentioned firmware and a PIT I've found somewhere in a forum together with 1.85 Odin (u1_02_20110310_emmc_EXT4) for that phone. Unfortunately it seems that I "killed" (Hard or Soft bricked - don't know) my phone (So far I remember I switched Nand erase by lack of attention also, but stopped before complete).
Now the phone starts only in "Phone-exclamation-PC" mode ever and ever again - even with a JIG. Odin 3 and 1.85 recognizes the phone, but don't get further than "Setup Connection". Sometimes I get a connection after I used Jig (still at that showing that exlamation screen), and can flash something, but not always. Kies doesn't get a connection.
So my questions:
1. Is it completely bricked?? (meaning: Sending to Samsung)
3. If not, how can I recover it? (I Don't know, but looks like a kernel startup problem, evtl. wrong PIT)
2. If yes, can someone tell me how much one have to pay for repair in average?
(Before that I made a complete flash/nand mem backup by su and dd of this phone on a 16GB USB Stick - can I use that somehow?)
peteralliston said:
Hello all!
Yesterday I started to 1st time flash my 9100g to presumably "original" firmware (I9100GXXLSR_I9100GXXLSP_I9100GDBTLS1_HOME.tar) with the before mentioned firmware and a PIT I've found somewhere in a forum together with 1.85 Odin (u1_02_20110310_emmc_EXT4) for that phone. Unfortunately it seems that I "killed" (Hard or Soft bricked - don't know) my phone (So far I remember I switched Nand erase by lack of attention also, but stopped before complete).
Now the phone starts only in "Phone-exclamation-PC" mode ever and ever again - even with a JIG. Odin 3 and 1.85 recognizes the phone, but don't get further than "Setup Connection". Sometimes I get a connection after I used Jig (still at that showing that exlamation screen), and can flash something, but not always. Kies doesn't get a connection.
So my questions:
1. Is it completely bricked?? (meaning: Sending to Samsung)
3. If not, how can I recover it? (I Don't know, but looks like a kernel startup problem, evtl. wrong PIT)
2. If yes, can someone tell me how much one have to pay for repair in average?
(Before that I made a complete flash/nand mem backup by su and dd of this phone on a 16GB USB Stick - can I use that somehow?)
Click to expand...
Click to collapse
1. It definitely looks like a Service Centre job, but I may be wrong. The "phone-exclamation-PC" is a type of download mode. So that means you only have soft brick, and not a hard one.
2. Yup, wrong PIT it is. You should be careful before flashing PIT files mate. You can try flashing stock firmwares via Odin to see if anything succeeds. But I doubt it will.
3. It is usually the cost of a new motherboard + service charges.
For better answers and guidance, you should state your issue here:
http://forum.xda-developers.com/showthread.php?t=1585413
1. It definitely looks like a Service Centre job, but I may be wrong. The "phone-exclamation-PC" is a type of download mode. So that means you only have soft brick, and not a hard one.
2. Yup, wrong PIT it is. You should be careful before flashing PIT files mate. You can try flashing stock firmwares via Odin to see if anything succeeds. But I doubt it will.
Click to expand...
Click to collapse
Thanks! Yes.
So, a WARNING from me: The PIT "u1_02_20110310_emmc_EXT4.pit" for the phone version "I9100GXXLSR_I9100GXXLSP_I9100GDBTLS1_HOME.tar" which is posted in some forums, IS WRONG!
CORRECT ONE IS: "omap4_all_20110627_emmc.pit" (Here attached; MD5: 8fd1dd2630dd844abe9183203fa438f7)
For better answers and guidance, you should state your issue here:
http://forum.xda-developers.com/showthread.php?t=1585413
Click to expand...
Click to collapse
'll do

SAMSUNG SM-G530AZ (Cricket) ALL FIRMWARES

Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
I am curious could i perhaps flash the csc for tmobile then maybe my dev settings let me unlock bootloader like tmobile variant? I am not certain but I feel like it could possibly
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
two559 said:
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
Click to expand...
Click to collapse
Ya I am working on a few things but, honestly its going to be tough if I do happen to figure out a way for custom recovery xda forums will know first.
Helllo
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
edyrod84 said:
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
Click to expand...
Click to collapse
If I doesn't turn on at all. Then it's bricked. To make sure. Switch the battery or charge it. If it still doesn't turn on there is nothing you can do. But if you can get into Odin and download mode. There is hope and I have the files you'll need to salvage it.
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
EvilDoer360 said:
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
Click to expand...
Click to collapse
I rooted mine a while back, do you still need assistance?
i need some help, is there any custom recovery i can install for this phone?, cause i wanted to install the rom in this thread with flashify but i can't do it: http://forum.xda-developers.com/gran...285mb-t3415560
Layman instructions?
I just want to root my phone so that I can save whole apps on my sd card to free up so much space.
I'm just a layman though and have no idea what's being talked about or what the files are that you're sharing. I would really appreciate step by step layman instruction. Thank you so much if you can do that!
toxinburn said:
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
Click to expand...
Click to collapse
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
toxinburn said:
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
Click to expand...
Click to collapse
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
ya i think you messed up royally, their is no working philz or cwm for the 530AZ at all because the bootloader is locked soooo i dont see how you ever flashed it with that in the first place, but if you indeed were able to then it looks like you have a soft brick of sorts since the bootloader is locked on that model, their is firmware but you for some reason are unable to flash with odin so sadly I am not sure what else you could do other than maybe see if it is recognized on other usb ports or computer also check your device manager in windows and check and see if the usb device is listed if it shows a yellow exclamation or unknown device then manually update the driver for the unknown device as an android device
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
Since Odin won't recognize it
Give this a shot
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
[Edit]didn't realize that comment was so old xD [/Edit]
Help!!
Autolounge said:
I rooted mine a while back, do you still need assistance?
Click to expand...
Click to collapse
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
benash2010 said:
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
Click to expand...
Click to collapse
That is the exact model I have so this should work! Use KingRoot but the desktop variant. And if that doesn't work use KingRoot, again the desktop variant. Let me know how it goes!
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command.
Let me know
apk
Sorry for the file "CROM_Service.apk" for what?
Hey I need that!
Kangrito said:
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command./
Let me know
Click to expand...
Click to collapse
HEY I REALLY NEED THAT!
I don't have the actual CWM on my phone yet. I just got it today. I already have it rooted, deodexed, and debloated(somewhat).
I was able to root it using kingroot. I'm still working for a way to replace the newest kingroot(5.1.0) with SuperSU.
But my question is does it actually work? Have you flashed the tar with odin and fix the code in it with commands.
Just reading your post gives me chills honestly. I like doing things as soon as I can! I'm a phoneaholic.

Categories

Resources