Related
READ FIRST
Hey,
Welcome to this tut. It's been active for a few months now but there are some things many users and the dev's want to tell you.
1. DO NOT ask questions about when things are finished.
2. Before you ask an question use the SEARCH THIS THREAD button
3. Post tut related questions in THIS THREAD, so do NOT POST QUESTIONS IN THE DEV THREAD
4. Use the THANKS button when you get your answer.
5. Don't ask questions like "I've done everything but it doesnt work" we really can't help you with such a question cause we don't know where what goes wrong..
If your post is violating one of these "thread rules" (don't call then real rules...) then we'll just report your post. getting it deleted.. etc. etc..
For our "Wise" users here (i mean the ones who actually READ before they post) Don't go flame on users asking stupid questions just leave them allone and REPORT the post
Thanks & Enjoy.
ShadowAS1
Okay, to be clear. All this work is COPYRIGHTED By the devs, The TUT is copyrighted by me, so stop frigging CopyPastaing my tut.. . With other words.. ASK PERMISSION TO DO SO, Thanks[/B]
New in this update:
Added new FOTA
Disclaimer:
This stuff is still experimental, me, nor the devs will be responsible for any damage done to you, your phone or whatsoever, so USE AT OWN RISK
Warning:
Do NOT flash when you don't know what you're doing. It could BRICK your phone. And I will NOT support it when you screw up your phone.
FAQ
Q: It doesn't work I've done everything but it doesnt work
A: Do you even think we CAN answer the question if you ask it like that?
Q: My phone shuts down after 2 minutes, why?
A: It's an idle bug.. We're still looking for a solution
Q: When will GB be released, When will the modem drivers be finished.. etc..
A: WE DON'T KNOW! STOP ASKING THIS
What WORKS in this build
WiFi (+dhcp)
Market
3D Games (some maybe not)
Launchers (tested TWLauncher, Zeam, LauncherPRO)
Audio (FULL Working now)
Video's (see my livestream.com example)
What does NOT work in this build
Modem (3G, Calls, ETC) (works partially on oleg's build we're still working on it)
Idle time (also known as the shutdown bug)
Sensors (Causes battery bug)
Supported BOOTLOADERS
S8500DDJE7_MAY
S8500JVKC1_MAR
S8500XXJD9_APR
S8500XXJEE_MAY
S8500XXJEF_JUN
S8500XXJF1_JUN
S8500XXJF4_JUL
S8500XXJH2_DEC
S8500XXJH2_NOV
S8500XXJH3_AUG
S8500XXJI3_FEB
S8500XXJI3_NOV
S8500XXJID_SEP
S8500XXJK2_MAY
S8500XXJL2_APR
S8500XXJL2_DEC
S8500XXJL2_MAR
What do we need?
Multiloader: MegaUpload
zImage & stuff: MegaUpload
EXT2 IMG Filesystem: Part1 Part2
FOTA: MegaUpload (Restored old one)
Ok before we start. The tutorial is now 100% Rewritten. But you still need to read carefully
Notice
Clean out your ENTIRE bada storage first cause we will need almost everything of it
Notice2: This project is still in ALPHA Stage. So don't expect a fully awesome working version yet.
In this version all KNOWN fixes are implented except for root
1. Download all the needed files, when you've done so extract the ZIP with the zImage stuff in it and place it in you bada storage root. (you can extract the .001 with 7-zip)
(i made the Images URLS's because they're to big)
1b. Connect your phone and put it in Mass Storage mode
You should copy your files like the Images below
Bada Storage root:
http://ShadowAS1.com/badadroid/storageroot1.png
This should be inside your storage root:
http://ShadowAS1.com/badadroid/storageroot2.png
This should be inside your galaxyboot folder:
http://ShadowAS1.com/badadroid/storageroot3.png
So inside the sorage root should be your galaxyboot folder and the makext2img.sh
inside the galaxyboot folder should be zImage, SBL.bin and the .IMG file
2.Then you should shut down your phone and boot it in download mode:
Vol Down+Camera+Power and you will see DOWNLOAD MODE on the screen
3.Open up multiloader and take over my config here:
http://shadowas1.com/badadroid/multiloader.png
When you click port search the name "LISMORE" should/can popup next to the right COM port
Now click download and wait for it to finish
Okay, now your phone is ready for the first android run
Boot it by holding power+menu+vol up: (see image)
http://shadowas1.com/badadroid/IMG_0052.JPG
Then this should popup (after the SGS screen)
DO NEVER, ABSOLUTELY NEVER PULL OUT BATTERY OR TOUCH THE PHONE IN THIS PROCESS
http://shadowas1.com/badadroid/IMG_0050.JPG
This can take up to 5 minutes.
Now, Two things can happen
1. The phone boots bada
2. The phone shuts down
In any of this cases your phone is absolutely fine. If you have case 2 you can boot bada to check if everythings alright if you wish.
Assuming we all boot bada shut down the phone again
Boot android in the normal way by holding the Power and Call key
=====Removing Android from your bada partitions======
On request i add this one, In order to remove all android stuff put the "mkext2images-remove.sh" in your bada storage root and boot recovery mode again
Goodluck, ShadowAS1
Good Luck,
ShadowAS1
_________________
Changelog:
12-7(2): Added new FOTA
12-7: Added what (doesn't) work(s) list
10-7: Updated some stuff (FW list)
Thanks a lot!!
Great Guide!
But!
If some of you are having problems installing VMware due to processor requirements, we can still use the Ubuntu live CD and use gparted disk utility..
Also, we can also use a live CD version of gparted.. just search it at Google..
Wonderful guide to read, testing it now. Will post my results if i manage it (or not )
Regards
So can i use other apks than that specified above..?
prok**** said:
So can i use other apks than that specified above..?
Click to expand...
Click to collapse
The APKs listed above are ment to avoid crashing
you can use al programs listed in the phone i can not guarantee that it will work completely this is still pre-alpha
Nice guide...thank you
Hi!
I have followed all the steps.
Now I'm in the First-time Run section and when I start Android (end call and then start call buttons) the screen flashes, then the Galaxy S screen appears. After 6-7 seconds, blank screen and... Samsung Wave and Bada screens with bada startup!
I saw other member in other post having the same issue, but he had still no answer.
Any idea?
Yeap, still same problem as mcmollo after following this guide as well ...
Works for me
Thanks
ShadowAS1 said:
The APKs listed above are ment to avoid crashing
you can use al programs listed in the phone i can not guarantee that it will work completely this is still pre-alpha
Click to expand...
Click to collapse
i see .. well if i try i ll let u guys know.. .. thank u for ur support.. still waiting for ubuntu..
Same here
You guys are on xxjl2 firmware right?
kadavil said:
You guys are on xxjl2 firmware right?
Click to expand...
Click to collapse
Yeah, as stated in your and in Shadow's guide.
Yeap, same here: XXJL2 provided in the tutorials.
I have a SanDisk 2GB class 4 microSD card and created a FAT16 primary partition (1GB) and a EXT2 primary partition (1GB).
kadavil said:
You guys are on xxjl2 firmware right?
Click to expand...
Click to collapse
Yes. I repeated the tutorial 3 times, taking care of doing it exactly as you say. But Bada still loading after Galaxy screen.
Maybe compatibility problem with the SD card?.
Mine is KINGSTON MICRO SD HC 8GB CLASS 4
I created a FAT16 primary partition (4GB) and then the EXT2 partition (4GB).
Will we install waveII (s8530) ?
SORRY SORRY I forgot something important. Read the tuto again. you'll notice the edit (because there's abig fat "EDIT" in front of it) This may fix the problems
can i use ubuntu 10.04?
ShadowAS1 said:
SORRY SORRY I forgot something important. Read the tuto again. you'll notice the edit (because there's abig fat "EDIT" in front of it) This may fix the problems
Click to expand...
Click to collapse
thanks, i hope, we ll use stable android on 8530...
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
Tablet look:
CHANGELOG for 2.6.3.0:
-Proper backup and restore of SELinux contexts (thanks to Tassadar)
-Pull in some ROM information for backup name generation
-Merge all recent patches from AOSP bringing TWRP up to date with Android 4.3
-Add 1200x1920 theme (thanks to Tassadar)
-A few other fixes and tweaks
CHANGELOG for 2.6.1.0:
-Initial SELinux support (only a few devices, need testers so come by IRC if your device doesn't have it and needs it)
-Initial support for f2fs file system formatting (Moto X)
-Update SuperSU install for 4.3 ROMs
-Fixed a permissions bug on files created during backup
-Fixed a bug that caused TWRP to not wait for compressed backups to finish causing 0 byte files and md5sums to not match
-Fixed decryption of encrypted data so that both TouchWiz and AOSP decryption are possible
-Ignore lost+found folder during backup and size calculations
-Various other minor bug fixes and tweaks
CHANGELOG for 2.6.0.0:
Special Note: If you are running a custom theme, you will likely need to remove that theme before updating to 2.6.0.0 as your custom theme will likely not have some of the new changes visible (e.g. you won't be able to encrypt a backup)!
-Can encrypt a backup to prevent theft of private data from your backup files
-Updated graphics / icon courtesy of shift
-Updated exFAT to latest commits
-Fixed a problem with Samsung TouchWiz decryption
-Update SuperSU binary
-Fixed saving of backup partitions list
-Fixed saving of last used zip install folder
-Fixed backup of datadata on devices that use a separate partition for datadata
-Fixed some issues with the advanced wipe list (android_secure, can now wipe internal storage on data/media deivces and wipe data on the advanced list no longer formats the entire data partition)
-Fixed some problems with partitioning a SD card
-Various other bug fixes and tweaks
Notes about encrypted backups:
Why encrypt your backups? -- Most people store their backups on the device. Any app that has permission to access storage could potentially read your backup files and try to harvest your data. Encrypted backups also provide an added layer of security if you move your backups to other storage devices or to the cloud. The encryption that we're using is probably not strong enough for enterprise level security, but should be strong enough to make it significantly difficult to get to your data.
Encryption is using OpenAES which uses AES 128-bit cbc encryption. If you happen to use a longer password (over 16 characters) then the encryption strength improves to 192 or 256 bits. Do not forget your password. If you forget your password you will be unable to restore your backup. We don't encrypt the entire backup. Encryption is very CPU intensive and can be fairly slow even when we spread the workload over multiple cores even on the latest high-end devices. To ensure that encrypted backups don't take forever, we don't encrypt any other partitions besides /data and in /data we don't encrypt /data/app (or other app related directories where apks are stored) and we don't encrypt dalvik cache.
DOWNLOAD:
The fastest and easiest way to install TWRP is to use the GooManager app:
Play Store Link
Direct Download
1) Install GooManager from the Play Store
2) Open GooManager and provide root permissions
3) Hit Menu (or the button with the 3 dots on your screen) and then Install OpenRecovery
OR:
You can find more information and download links on our website!
BUGS:
If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Dees_Troy said:
[RECOVERY] TeamWin Recovery Project (twrp) 2.0.0RC0 [2011-12-17]
Team Win Recovery Project 2.0, or twrp2 for short, is a custom recovery built with ease of use and customization in mind.
Special thanks to xboarder56 for helping test the port and a couple of other testers that I forget the names of at the moment.
Click to expand...
Click to collapse
NICE, thanks to the both of you! Goin' on tonight fo sho.
Very nice job guys! I just might have to update my signature now.
Is there any future in external sdcard support?
Looks good I guess I'll have to update from the old version, thanks.
Awesome work guys.... this kicks total butt!
Nice! It's come a long way since I used it on my 3D. Alot faster compressed backup, thanks
Sent from my HTC Amaze 4G using xda premium
Has anyone had luck installing this on amaze????
Sent from my HTC Amaze 4G using xda premium
milo356 said:
Has anyone had luck installing this on amaze????
Sent from my HTC Amaze 4G using xda premium
Click to expand...
Click to collapse
I have. I can do it in different ways. flash_image recovery recoveryname.img command from the phone itself if you have the flash_image binary installed or by fastboot flash recovery recoveryname.img with the phone in bootloader mode.
Not complicated at all.
Works great, so much better than using the volume up/down keys and power keys. Two weird things that I want to see if anyone else is having issues with (want to know if it is worth reporting on the github)
1. After accessing recovery I get the "Tell HTC" This phone has just recovered from a abnormal reset message. Didn't get that with clockwork, not sure if it is a bug or not.
2. Cant mount ext SD card. Saw that the EVO 3D had the same issue but they had fixed it. I assume this is a problem with the Amaze since it is the same with clockwork mod?
Sikety said:
Works great, so much better than using the volume up/down keys and power keys. Two weird things that I want to see if anyone else is having issues with (want to know if it is worth reporting on the github)
1. After accessing recovery I get the "Tell HTC" This phone has just recovered from a abnormal reset message. Didn't get that with clockwork, not sure if it is a bug or not.
2. Cant mount ext SD card. Saw that the EVO 3D had the same issue but they had fixed it. I assume this is a problem with the Amaze since it is the same with clockwork mod?
Click to expand...
Click to collapse
Use this one if you want to backup and restore to and from external sdcard.
pardon the question, I've looked all over TeamWin's web site... Is there a way to boot the Amaze into twerp directly?
gregma said:
pardon the question, I've looked all over TeamWin's web site... Is there a way to boot the Amaze into twerp directly?
Click to expand...
Click to collapse
I don't understand your question.
You want to reboot into recovery?
adb reboot recovery
or use the 22 different other ways to reboot into recovery.
Binary100100 said:
I don't understand your question.
You want to reboot into recovery?
adb reboot recovery
or use the 22 different other ways to reboot into recovery.
Click to expand...
Click to collapse
I'm talking about rebooting into recovery when I'm not anywhere near a computer. Such as on my HD2, I would hold the power button down until in MAGLDR, then choose to boot into Recovery. Is there something similar on the Amaze?
Greg
gregma said:
I'm talking about rebooting into recovery when I'm not anywhere near a computer. Such as on my HD2, I would hold the power button down until in MAGLDR, then choose to boot into Recovery. Is there something similar on the Amaze?
Greg
Click to expand...
Click to collapse
Which rom are you using?
There are a couple of roms that have the Advanced Power Menu that has a reboot option. When selected it gives you other options such as recovery and bootloader.
There are also a few apps (do a search for Reboot Recovery) on the Market.
I have always used the option from ROM Manager.
You can also use terminal emulator and use the command "reboot recovery" and that should do it too.
You can also power off the device, hold volume down while pressing power to get to hboot mode then select recovery.
Binary100100 said:
Which rom are you using?
There are a couple of roms that have the Advanced Power Menu that has a reboot option. When selected it gives you other options such as recovery and bootloader.
There are also a few apps (do a search for Reboot Recovery) on the Market.
I have always used the option from ROM Manager.
You can also use terminal emulator and use the command "reboot recovery" and that should do it too.
You can also power off the device, hold volume down while pressing power to get to hboot mode then select recovery.
Click to expand...
Click to collapse
Stock ROM right now, I'm getting things set to start flashing new ROM's. Aha! I did see the "recovery" in hboot. Now once I figure out how I lost the ability to get into hboot by holding the volume down button I'll be good to go!
Greg
---------- Post added at 01:55 PM ---------- Previous post was at 01:22 PM ----------
gregma said:
Stock ROM right now, I'm getting things set to start flashing new ROM's. Aha! I did see the "recovery" in hboot. Now once I figure out how I lost the ability to get into hboot by holding the volume down button I'll be good to go!
Greg
Click to expand...
Click to collapse
I LOVE answering my own darned post.... Didn't realize you had to battery power cycle the device to get it back into hboot. I'm good to go now!
Greg
ok i got it loaded up fine on my phone but i cannot figure out how to flash. i click the install button and it takes me to my directories but i dont see any files in the directories... there is no files listed in the root of either sd card as well. what am i doing wrong?
2sh0rt said:
ok i got it loaded up fine on my phone but i cannot figure out how to flash. i click the install button and it takes me to my directories but i dont see any files in the directories... there is no files listed in the root of either sd card as well. what am i doing wrong?
Click to expand...
Click to collapse
Move the zip file to the other sdcard. Remember that you have two.
Here's a free tip!
Make two empty zip files.
Name one internal.zip
Name the other external.zip
Place the internal.zip in the internal sdcard and the external.zip in the external sdcard.
Reboot into recovery and if you see internal.zip file. Guess what sdcard you're looking at? Same goes for external.
Binary100100 said:
Move the zip file to the other sdcard. Remember that you have two.
Here's a free tip!
Make two empty zip files.
Name one internal.zip
Name the other external.zip
Place the internal.zip in the internal sdcard and the external.zip in the external sdcard.
Reboot into recovery and if you see internal.zip file. Guess what sdcard you're looking at? Same goes for external.
Click to expand...
Click to collapse
Dude, i know this... i came from the vibrant. Im saying that NEITHER card shows ANY files... only directories... no zips on the root of /sdcard or /sdcard/ext-sd... nada, zip, zilch
2sh0rt said:
Dude, i know this... i came from the vibrant. Im saying that NEITHER card shows ANY files... only directories... no zips on the root of /sdcard or /sdcard/ext-sd... nada, zip, zilch
Click to expand...
Click to collapse
I came from the vibrant as well however I wasn't so active there.
I don't understand why you don't see any zip files then. Strange.
Me either... think i'll just try and reload it and see what happens. Thought maybe i was clicking the wrong thing or not clicking something.
---------- Post added at 07:47 PM ---------- Previous post was at 07:43 PM ----------
and its not just that i dont see any zip files. i dont see ANY files at all! every directory i click is empty! even on the system partition! not a single file shows up. only directories and when i click them there is nothing except /.. and /.
I am now making post that there really shouldn't be any need for, because all that's in here is already covered elsewhere. 100% Apparently not easy enough to find for newcomers, so I'm making an attempt to help info collection.
NOTHING here is my work! All I’ve done is trying to make easy to follow instructions to other people’s hard work. Those people deserve your thanks, not me!
I’m a newbie myself and that’s why I can say that this really is very easy! If I can do it without problems, so can you! I try not to chat away too much in the instructions. Make regular searches, here or Google for more info. I found it, so surely you can too! Any questions? Well, being a noob myself I probably can't answer. Google is a very good friend of mine though...
Please do not ask questions through pm. It's better if people that know more than I do get a chance to answer them in the thread instead!
You need to know how to burn an sd image. Separate instructions to that after the other instructions if you don’t.
Step 1: Establish what it is you want to do! Choose A, B or C
A: You do not want to touch the internals of your NT but want to try CM10 anyway
B: You want to stay in the BN environment but would like to be able to install apps from elsewhere (for example Google Play Store)
C: You want to get rid of BN and install CM10 instead.
A: Run CM10 from sd card – no root required
This should work on 8GB Tablet as well as 16GB
When you boot into the card you’re running Android ICS. Remove the card and you’ll boot to internal BN operating system. (Or keep the card in, boot to Cyanoboot Menu and choose “internal boot”)
Ready-made card image download links to be found here: http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
It’s a large download (around 500 MB), but it is a ready-made sd card image. As it says in the instructions there, you’ll more than likely want to expand the user partition to take full advantage of the card, but that’s covered in his instructions.
There are other, more manual ways to make these cards as well. Also covered both in that blog and here at XDA! Go search!
B: Root the Tablet
This works on both 8GB and 16 GB Tablet.
“Rooting” is like unlocking your device, giving you access and control over it. You’re still running BN operating system though. Several excellent root guides here on XDA.
For example: http://forum.xda-developers.com/showthread.php?t=1488035
Or http://forum.xda-developers.com/showthread.php?p=21275927#post21275927
The first one (Brian’s) require a 2 GB card the other one (Albert’s) just needs a very small card. (I think 128 MB would do, but I don’t have any that small to try)
Both give good instructions in their topics.
Both install gApps.
If you want to block OTA updates from BN, go to Play Store and find NT Hidden Settings. Even if it got installed with the root it’s probably not latest version and doesn’t have the Block OTA function.
C: Installing CM10 internally
***8GB owners must make sure to use ROM that works with their device!***
Since I’m a noob I look for easy way, and this is very easy and needs very little know-how!
***Warning! CWM is a very powerful tool. Do not "wander around" and "experiment" with stuff without doing proper research! Seriously! DON'T!***
1. You need a bootable CWM card. Instead of making my own I use Albert's root image from B (above) because this image includes CWM 5.x.x. I use this to flash a higher version CWM internally. I erase the zip files from the card to make room for a flashable CWM 6.x.x
2. Find a flashable CWM 6.x.x I found mine through http://forum.xda-developers.com/showthread.php?t=1640958
I use the one named "flash_cm9-10_cwm v6...." Download and copy to your sd card.
3. Boot into the sd-card and it should take you to CWM 5.x.x. environment.
I guess a backup of you current system would be a good thing (even though I admit to skipping that myself). To backup you'll probably need another card if you're using "The Albert Card" now, because I doubt it's enough room on that.
You navigate with the volume rocker, go back to previous menu with “power” and confirm choices with “n”
Choose “install zip from card” – “choose zip from card” – your CWM zip
See warning above!
4. Power off and prepare your sd card for ROM flashing. (If you’re working with just one card you will need to format it with SD Format or similar to get it back to full capacity.) Put your CM10 ROM zip and the appropriate gApps zip on the card.( It doesn’t matter if there’s other stuff on the card, so you don’t have to format it because of that!). I will not link to a specific ROM. Make your own choice but be sure it works for your model and also make sure you use the right gApps!
5. Reboot into Cyanoboot. This took me a couple of attempts to get right.
From powered down device, press power and right after that press and hold "n", You should boot into Cyanoboot and get the boot menu. Choose "Internal recovery" and you should get into new CWM
6. I don’t know how much clearing is needed, but I prefer to clear pretty much everything to make sure of a clean install. Cache and Dalvik I always clear.
***DO NOT format anything unless you knwo what you're doing! *** (See Satan's posts below)
7. Flash ROM and gApps same way as you flashed the CWM 6.x.x (install zip from card – choose zip from card) reboot and go!
How to burn an sd-image:
I use Win32Diskimager. Download link in Albert’s root topic (and numerous other places!!)
Unzip into a folder.
(I also copy my various img files to that folder to have them easily available)
No need to install, just run by doubleclicking the EXE in the folder.
Make sure the device letter really is your sd card.
Click on the blue folder and navigate to your img file, choose it and “write”.
It will take some time if it’s a large img, but that’s what the progress bar is there for, isn’t it?!
Nice work ,
But you should add 'do not format any partition ' warning. Android users coming from other devices might do this by default during flashing rom.
Almost every one with bricked tablets has tried formatting partitions.
Sent from my ST21a
Thanks Satan! I did not know that! Will do!
Good
Veronica had made sticky thread to reduce number of bricked tablets, but looks like some people missed it.
To be more specific,
Do not format rom, boot, bootdata, and factory.
http://forum.xda-developers.com/showthread.php?t=1644862
satan89 said:
but looks like some people missed it.
Click to expand...
Click to collapse
It looks like a lot of people miss a lot of things...
satan89 said:
Good
Veronica had made sticky thread to reduce number of bricked tablets, but looks like some people missed it.
To be more specific,
Do not format rom, boot, bootdata, and factory.
http://forum.xda-developers.com/showthread.php?t=1644862
Click to expand...
Click to collapse
+1000
Do not format especially the rom partition and, most critically, the factory partition which respectively contain a set of small files with device-specific unique data (not only Serial No. but also MAC address, public/private key certificates, etc.) and the backup archive copy of the same data files (/factory/romdata.zip).
Unfortunately, I've seen some "unbricking" tools (including some that are very frequently cited/recommended on these NT forums) reformat/zero-out and flash over these 2 partitions. The end result being, even in the event the "bricked" NT gets "restored to stock", depending on the specific tool used it could be carrying device-specific data of someone else's (e.g., tool developer's) NT.
EXACTLY!
satan89 said:
Good
Veronica had made sticky thread to reduce number of bricked tablets, but looks like some people missed it.
To be more specific,
Do not format rom, boot, bootdata, and factory.
http://forum.xda-developers.com/showthread.php?t=1644862
Click to expand...
Click to collapse
I think this is exactly what happened to my NT. Took me weeks of researching (I don't have a lot of free time) to figure out how to restore my 16GB NT.
Help
Im trying to single boot CM10 from sd card without touching nook os. I am using guide (CM10.0 Jellybean SDCard IMG for Nook Tablet (12/31) FINAL)
I have tried for hours using different methods also and cant even get it to boot to CM, no CM logo at all. I have a BNTV250 NT on 1.4.3. I have tried multiple sd cards, I am using a Sandisk 8gb class 6.
In a nutshell all I should have to do is
-Format the card with SD formatter,
-Extract the (Extract cm10_xxxxxx_sd_hd.img from cm10_xxxxxx_sd_hd.7z/rar)
-Use Winimage to write the image to the SD card, correct??
The Nook still refuses to boot into Cyanogen, just boots up normal every time!
same with every procedure i have tried,
Any pointers????
Have you tried putting the sd-catd in the powered down Tablet and then insert the charger cable, connected to the charger?
Many Tablets have difficulties booting into sd other ways,
asawi said:
Have you tried putting the sd-catd in the powered down Tablet and then insert the charger cable, connected to the charger?
Many Tablets have difficulties booting into sd other ways,
Click to expand...
Click to collapse
No, I have not, will try now.........ty
---------- Post added at 02:25 PM ---------- Previous post was at 02:23 PM ----------
HOLY ****!!!! I LOVE YYOU!!:laugh::laugh::laugh::laugh::highfive::victory:
That worked, I cant believe it. Why is this not written anywhere??
LOL! :laugh: Glad you got it working!! :good:
Any clue of how to get rid of booting that way? I'm not always with a USB cable witj me.
Enviado desde mi Nexus 4 usando Tapatalk 2
I've never had to do it that way myself so I really don't know. You could try pressing the "n" buttons right after the power button and holding it for a few seconds.
Actually not being able to boot into SD card easily is the reason some install internally instead.
Sent from my NookTablet using Tapatalk 2
asawi said:
I've never had to do it that way myself so I really don't know. You could try pressing the "n" buttons right after the power button and holding it for a few seconds.
Actually not being able to boot into SD card easily is the reason some install internally instead.
Sent from my NookTablet using Tapatalk 2
Click to expand...
Click to collapse
Tried doping that with no luck. After 8 or 10 attempts magically boots todo cm. Thanks.
Enviado desde mi Nexus 4 usando Tapatalk 2
Alright, just got cwm 6.x installed and now ready to install rom, just wanting to verify that I should still "wipe data/factory reset" and "wipe cache partition"? That is different from "formatting" correct? I don't wanna brick this thing without confirmation. Thanks for the awesome guide!
edit: Ignore the wipe question, found it, thank again for the guide, I will let you know how the install goes!
ThePhantom97 said:
Alright, just got cwm 6.x installed and now ready to install rom, just wanting to verify that I should still "wipe data/factory reset" and "wipe cache partition"? That is different from "formatting" correct? I don't wanna brick this thing without confirmation. Thanks for the awesome guide!
edit: Ignore the wipe question, found it, thank again for the guide, I will let you know how the install goes!
Click to expand...
Click to collapse
Thank you very much for putting this together, it was very helpful!
hi guys.i'm stucked on something by 2 days.and i just can't resolve this.i want to put android 4.3 on my Wave 2 S8530,and it's just impossible.i saw that it's working well,without lag,and i want it.i read all the instructions,on every thread,but my phone just don't want to accept it,lol. i did some steps,and i had to wait for about 20 minutes(not kidding) to boot up.and then,to enter in the menu,i had to wait another 5 minutes.and then,restarts,and so on to the end. i did something wrong maybe.if someone could say me what i have to do,i would be grateful.i saw videos on youtube,i did same,but nothing. when i have to mount usb storage in recovery mod,after copying the clockworkmod folder,the sd card unmount by itself.and so,just some files are transfered to card.problem with usb i don't have.maybe the card is the problem.i tried with card reader,and as i told you,i have to wait a long,long time to boot up.altough after that long boot up worked well,was something.but no,is not working.please help me.and if like wasn't enough,all these files are shared with multiupload.and this site didn't work anymore.if you could give me another site from where to download the files i need,i would be.again,grateful.PLEASE!!
userX.x said:
hi guys.i'm stucked on something by 2 days.and i just can't resolve this.i want to put android 4.3 on my Wave 2 S8530,and it's just impossible.i saw that it's working well,without lag,and i want it.i read all the instructions,on every thread,but my phone just don't want to accept it,lol. i did some steps,and i had to wait for about 20 minutes(not kidding) to boot up.and then,to enter in the menu,i had to wait another 5 minutes.and then,restarts,and so on to the end. i did something wrong maybe.if someone could say me what i have to do,i would be grateful.i saw videos on youtube,i did same,but nothing. when i have to mount usb storage in recovery mod,after copying the clockworkmod folder,the sd card unmount by itself.and so,just some files are transfered to card.problem with usb i don't have.maybe the card is the problem.i tried with card reader,and as i told you,i have to wait a long,long time to boot up.altough after that long boot up worked well,was something.but no,is not working.please help me.and if like wasn't enough,all these files are shared with multiupload.and this site didn't work anymore.if you could give me another site from where to download the files i need,i would be.again,grateful.PLEASE!!
Click to expand...
Click to collapse
First, make sure to have rom zip (badadroid v4.x) on SDcard OR on bada user partition and the good zImage (the zImage given with the rom, inside the zip) on bada user partition. If this is done, flash FOTA and Bootfiles (for s8530, not s8500) from Badadroid thread. once done, you should be able to access recovery mode. From recovery mode, you just have to choose "flash zip/flash zip from sdcard0 or sdcard1 (if you choose bada user partition fo ROM zip), wait the flashing to be done, and reboot holding call. Android should boot.
(I assumed you tried to flash badadroid, and not another rom, instructions may differ)
BenzoX said:
First, make sure to have rom zip (badadroid v4.x) on SDcard OR on bada user partition and the good zImage (the zImage given with the rom, inside the zip) on bada user partition. If this is done, flash FOTA and Bootfiles (for s8530, not s8500) from Badadroid thread. once done, you should be able to access recovery mode. From recovery mode, you just have to choose "flash zip/flash zip from sdcard0 or sdcard1 (if you choose bada user partition fo ROM zip), wait the flashing to be done, and reboot holding call. Android should boot.
(I assumed you tried to flash badadroid, and not another rom, instructions may differ)
Click to expand...
Click to collapse
I want to install ULTRA B.U.X 3. that´s the rom i want
i would download from here http://forum.xda-developers.com/showthread.php?t=2609560 but the multiupload site don´t work anymore
userX.x said:
i would download from here http://forum.xda-developers.com/showthread.php?t=2609560 but the multiupload site don´t work anymore
Click to expand...
Click to collapse
BUX is good but outdated, and i don't know if there is any working links...
Try Badadroid
Come here if you need help : http://widget00.mibbit.com/?setting...5d0c&server=irc.Mibbit.Net&channel=#zendrokat
Say my pseudo if you want me to notice.
BenzoX said:
BUX is good but outdated, and i don't know if there is any working links...
Try Badadroid
Come here if you need help : http://widget00.mibbit.com/?setting...5d0c&server=irc.Mibbit.Net&channel=#zendrokat
Say my pseudo if you want me to notice.
Click to expand...
Click to collapse
sorry that i ask,but is badadroid better than BUX? i reefer as performance,gaming,and so on
userX.x said:
sorry that i ask,but is badadroid better than BUX? i reefer as performance,gaming,and so on
Click to expand...
Click to collapse
BUX is old and not allowed on XDA, but it offer good perf.
Badadroid is stable and run good but can't handle lot of apps in background (such as Gapps).
BenzoX said:
BUX is old and not allowed on XDA, but it offer good perf.
Badadroid is stable and run good but can't handle lot of apps in background (such as Gapps).
Click to expand...
Click to collapse
one more thing i ask.if i´m going for zendrokat,for example,can i play hd games as i would have played on BUX? and without lag?
userX.x said:
one more thing i ask.if i´m going for zendrokat,for example,can i play hd games as i would have played on BUX? and without lag?
Click to expand...
Click to collapse
Best for games is either BUX, Zendrokat on ICZen, depending on the game, not Badadroid (even if all these are based on Badadroid team work.)
BenzoX said:
Best for games is either BUX, Zendrokat on ICZen, depending on the game, not Badadroid (even if all these are based on Badadroid team work.)
Click to expand...
Click to collapse
i dunno man,i searched untill now all types of BUX and Zendrokat,and i didn't found anything.all links are closed,like zendrokat.com or megaupload.com. i'll just give up,i didn't went outside for 3 days,just to make my phone running better.but nothing. anyway,thanks for replying!
userX.x said:
i dunno man,i searched untill now all types of BUX and Zendrokat,and i didn't found anything.all links are closed,like zendrokat.com or megaupload.com. i'll just give up,i didn't went outside for 3 days,just to make my phone running better.but nothing. anyway,thanks for replying!
Click to expand...
Click to collapse
These roms are not allowed here, go to badania.de (german website) if you have more question., You'll find some files here
BenzoX said:
These roms are not allowed here, go to badania.de (german website) if you have more question., You'll find some files here
Click to expand...
Click to collapse
tnx brah!you da real mvp! after 3 days of searching,i finally found something good.i use android 4.4 and it´s super!hell yeah:good:
Hello,
First of all, if I seem to be rude or impolite, it's just because of my bad english, I apologize in advance...
I have bought a nook tablet 8G, cyanogenmod (android 4.3.1), as it uses to bootloop very often (and as it needs a simple wipe of data but a re-installation of the apk) every 4 or 5 boots, I thought it would be a great idea to re install a new cyanogen...I thought it would be as easy as on my samsung galaxy
But now, the only thing that it does is to reboot on recovery mode...When I try to power it on, it starts just like if it is ok, then it boots on TWRP mode (my CWM on galaxy seems to be more friendly). I have tried again to reinstall my rom, but it is said that it is "unable to mount data1".
I have also done a wipe dalvik cache but I prefer to stop and ask for further information before I do serious damages
I have also tried to install "flashable fix bootloop" but no way
Thank you very much !
Have you tried re-installing using SD-based CWM (e.g., see http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163 or http://forum.xda-developers.com/showpost.php?p=50828000&postcount=1)?
Hello Digixmax,
Thank you very much for your answer.
Before asking, I have searched and I saw this post http://forum.xda-developers.com/showthread.php?t=2692403, and I am very happy to have the opportunity to be helped by the one who posted it !
I haven't tried it because there are some parts that I don't understand very well but now I'm gonna try :fingers-crossed:
- I have a 32g sd card that I would like to use for my apk, shall I use it to install CM11 or shall I buy a new one ? Will a 2G sd card be sufficient ?
- What does "set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag" mean ? To set = let it free ? "Set its Active flag", I have no idea of what it means, will I understand by doing the manipulation ?
- For the second part, I have to download next u-boot.bin and flashing_boot.img in boot.zip from https://www.mediafire.com/folder/xjwc1a482a6ll/Nook_Tablet but I don't know wich one to choose.
What does MLO means ?
For the other points, I think it will be ok.
Oh...Is it necessary to intall CM10 before upgrading to CM11 ?
Thank you very much Digixmax, I am sorry to bother you with such stupid questions
Sarah B. said:
...
I have a 32g sd card that I would like to use for my apk, shall I use it to install CM11 or shall I buy a new one ?
Click to expand...
Click to collapse
You can just use existing card.
Will a 2G sd card be sufficient ?
Click to expand...
Click to collapse
It should be sufficient for installing CM.
- What does "set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag" mean ? To set = let it free ? "Set its Active flag", I have no idea of what it means, will I understand by doing the manipulation ?
Click to expand...
Click to collapse
You should see menu for partition type/flag settings when you're in a disk partition tool.
- For the second part, I have to download next u-boot.bin and flashing_boot.img in boot.zip from https://www.mediafire.com/folder/xjwc1a482a6ll/Nook_Tablet but I don't know wich one to choose.
What does MLO means ?
Click to expand...
Click to collapse
MLO is one of 3 the files you need, they are contained in the zip file succulent_boot.zip
...
Is it necessary to install CM10 before upgrading to CM11 ?
Click to expand...
Click to collapse
No. See http://forum.xda-developers.com/showthread.php?t=2692403 for pointers/tips on installing CM11.
Thanks a lot, Digixmax, I'm gonna do this tomorrow (I've to go to work now).
I will tell you what the situation is as soon as I finish.
Sarah B. said:
Thanks a lot, Digixmax, I'm gonna do this tomorrow (I've to go to work now).
I will tell you what the situation is as soon as I finish.
Click to expand...
Click to collapse
Since your NT is already on CM, you might want to try first the method to update from an older CM version to CM11 outlined at http://forum.xda-developers.com/showthread.php?t=2670589.
digixmax said:
Since your NT is already on CM, you might want to try first the method to update from an older CM version to CM11 outlined at http://forum.xda-developers.com/showthread.php?t=2670589.
Click to expand...
Click to collapse
:victory: :victory: :victory:
Thank you very very very very very much :highfive: